[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 114 insertions, 110 deletions

diff --git a/po/zh_TW/using-d-i.po b/po/zh_TW/using-d-i.po
index db86cf0d2..cb91e36e9 100644
--- a/po/zh_TW/using-d-i.po
+++ b/po/zh_TW/using-d-i.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2007-04-06 18:56+0000\n"
+"POT-Creation-Date: 2007-05-05 22:00+0000\n"
 "PO-Revision-Date: 2005-07-18 14:26+0800\n"
 "Last-Translator: Jhang, Jia-Wei <dreamcrer@gmail.com>\n"
 "Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
@@ -2772,7 +2772,11 @@ msgstr ""
 msgid ""
 "It is possible to get the installer to install KDE by using preseeding (see "
 "<xref linkend=\"preseed-pkgsel\"/>) or by adding <literal>tasks=\"standard, "
-"kde-desktop\"</literal> at the boot prompt when starting the installer. "
+"kde-desktop\"</literal> at the boot prompt when starting the "
+"installer<footnote> <para> A more lightweight Xfce desktop environment can "
+"be selected by using <literal>xfce-desktop</literal> instead of <literal>kde-"
+"desktop</literal>. If you are installing on a laptop, you could also add "
+"<literal>laptop</literal> to the tasks to be installed. </para> </footnote>. "
 "However, this will only work if the packages needed for KDE are actually "
 "available. If you are installing using a full CD image, they will need to be "
 "downloaded from a mirror as KDE packages are not included on the first full "
@@ -2781,7 +2785,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2047
+#: using-d-i.xml:2056
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. DNS "
@@ -2793,7 +2797,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2059
+#: using-d-i.xml:2068
 #, fuzzy, no-c-format
 msgid ""
 "Once you've selected your tasks, select <guibutton>OK</guibutton>. At this "
@@ -2804,7 +2808,7 @@ msgstr ""
 "<command>aptitude</command> 將安裝您選中的軟體套件。"
 
 #. Tag: para
-#: using-d-i.xml:2066
+#: using-d-i.xml:2075
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -2812,7 +2816,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2072
+#: using-d-i.xml:2081
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -2824,7 +2828,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2081
+#: using-d-i.xml:2090
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -2836,7 +2840,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2090
+#: using-d-i.xml:2099
 #, no-c-format
 msgid ""
 "Each package you selected with <command>tasksel</command> is downloaded, "
@@ -2846,13 +2850,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2103
+#: using-d-i.xml:2112
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "使系統可開機"
 
 #. Tag: para
-#: using-d-i.xml:2105
+#: using-d-i.xml:2114
 #, fuzzy, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -2865,13 +2869,13 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/>。</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2120
+#: using-d-i.xml:2129
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "偵測其他的作業系統"
 
 #. Tag: para
-#: using-d-i.xml:2122
+#: using-d-i.xml:2131
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -2885,7 +2889,7 @@ msgstr ""
 "腦也將設定為可以啟動其他作業系統。"
 
 #. Tag: para
-#: using-d-i.xml:2130
+#: using-d-i.xml:2139
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -2899,13 +2903,13 @@ msgstr ""
 "boot-loader 的文件以瞭解更多資訊。"
 
 #. Tag: title
-#: using-d-i.xml:2148
+#: using-d-i.xml:2157
 #, no-c-format
 msgid "Install <command>aboot</command> on a Hard Disk"
 msgstr "安裝 <command>aboot</command> 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2149
+#: using-d-i.xml:2158
 #, fuzzy, no-c-format
 msgid ""
 "If you have booted from SRM and you select this option, the installer will "
@@ -2924,13 +2928,13 @@ msgstr ""
 "您在安裝 Debian 的磁碟上裝有不同的作業系統，您將不得不從軟碟啟動 GNU/Linux。"
 
 #. Tag: title
-#: using-d-i.xml:2169
+#: using-d-i.xml:2178
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2170
+#: using-d-i.xml:2179
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -2945,19 +2949,19 @@ msgstr ""
 "<command>PALO</command> 能真正地讀 Linux 分割區。"
 
 #. Tag: para
-#: using-d-i.xml:2179
+#: using-d-i.xml:2188
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2191
+#: using-d-i.xml:2200
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>Grub</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2193
+#: using-d-i.xml:2202
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -2968,7 +2972,7 @@ msgstr ""
 "定的 boot-loader，它對新手來說是個不錯的預設選擇。對老鳥來說，它也同樣適合。"
 
 #. Tag: para
-#: using-d-i.xml:2199
+#: using-d-i.xml:2208
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -2980,7 +2984,7 @@ msgstr ""
 "訊，請參閱 grub 的手冊。"
 
 #. Tag: para
-#: using-d-i.xml:2205
+#: using-d-i.xml:2214
 #, no-c-format
 msgid ""
 "If you do not want to install grub at all, use the Back button to get to the "
@@ -2991,13 +2995,13 @@ msgstr ""
 "請參閱 grub 的手冊。"
 
 #. Tag: title
-#: using-d-i.xml:2219
+#: using-d-i.xml:2228
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>LILO</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2221
+#: using-d-i.xml:2230
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3013,7 +3017,7 @@ msgstr ""
 "ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:2231
+#: using-d-i.xml:2240
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3026,7 +3030,7 @@ msgstr ""
 "統。"
 
 #. Tag: para
-#: using-d-i.xml:2239
+#: using-d-i.xml:2248
 #, fuzzy, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -3034,13 +3038,13 @@ msgid ""
 msgstr "&d-i; 提供給您三種選擇來安裝 <command>LILO</command> boot-loader："
 
 #. Tag: term
-#: using-d-i.xml:2246
+#: using-d-i.xml:2255
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "主開機區 (MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2246
+#: using-d-i.xml:2255
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3048,13 +3052,13 @@ msgid ""
 msgstr "這種方式 <command>LILO</command> 將完全控制開機過程。"
 
 #. Tag: term
-#: using-d-i.xml:2253
+#: using-d-i.xml:2262
 #, no-c-format
 msgid "new Debian partition"
 msgstr "新 Debian 分割區"
 
 #. Tag: para
-#: using-d-i.xml:2253
+#: using-d-i.xml:2262
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3065,13 +3069,13 @@ msgstr ""
 "Debian 分割區的起始位置，並能作為第二 boot loader。"
 
 #. Tag: term
-#: using-d-i.xml:2262
+#: using-d-i.xml:2271
 #, no-c-format
 msgid "Other choice"
 msgstr "其它選擇"
 
 #. Tag: para
-#: using-d-i.xml:2262
+#: using-d-i.xml:2271
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3088,7 +3092,7 @@ msgstr ""
 "或 <filename>/dev/sda</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2274
+#: using-d-i.xml:2283
 #, fuzzy, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3103,13 +3107,13 @@ msgstr ""
 "<xref linkend=\"reactivating-win\"/>。"
 
 #. Tag: title
-#: using-d-i.xml:2290
+#: using-d-i.xml:2299
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>ELILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2292
+#: using-d-i.xml:2301
 #, fuzzy, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3134,7 +3138,7 @@ msgstr ""
 "行以掛載和啟動 Linux 核心。"
 
 #. Tag: para
-#: using-d-i.xml:2308
+#: using-d-i.xml:2317
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3149,13 +3153,13 @@ msgstr ""
 "是與 <emphasis>root</emphasis> 檔案系統相同的磁碟。"
 
 #. Tag: title
-#: using-d-i.xml:2320
+#: using-d-i.xml:2329
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "選擇正確的分割區！"
 
 #. Tag: para
-#: using-d-i.xml:2322
+#: using-d-i.xml:2331
 #, fuzzy, no-c-format
 msgid ""
 "The criteria for selecting a partition is that it is FAT format filesystem "
@@ -3171,13 +3175,13 @@ msgstr ""
 "割區，這將清除以前的所有內容！"
 
 #. Tag: title
-#: using-d-i.xml:2337
+#: using-d-i.xml:2346
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI 分割區內容"
 
 #. Tag: para
-#: using-d-i.xml:2339
+#: using-d-i.xml:2348
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -3203,13 +3207,13 @@ msgstr ""
 "間，系統更新或重新設定，檔案系統中也許會有其他檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2361
+#: using-d-i.xml:2370
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2362
+#: using-d-i.xml:2371
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -3220,13 +3224,13 @@ msgstr ""
 "filename> 以同檔名複製到 EFI 分割區的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2371
+#: using-d-i.xml:2380
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2372
+#: using-d-i.xml:2381
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -3239,13 +3243,13 @@ msgstr ""
 "<quote>EFI Boot Manager</quote> 指令選單。"
 
 #. Tag: filename
-#: using-d-i.xml:2382
+#: using-d-i.xml:2391
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2383
+#: using-d-i.xml:2392
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -3258,13 +3262,13 @@ msgstr ""
 "filename> 符號鏈結 <filename>/initrd.img</filename> 指向的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2395
+#: using-d-i.xml:2404
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2396
+#: using-d-i.xml:2405
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -3275,13 +3279,13 @@ msgstr ""
 "本地修改在下次 <filename>/usr/sbin/elilo</filename> 執行時將丟失。"
 
 #. Tag: filename
-#: using-d-i.xml:2406
+#: using-d-i.xml:2415
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2407
+#: using-d-i.xml:2416
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -3294,13 +3298,13 @@ msgstr ""
 "<filename>/vmlinuz</filename> 指向的檔案。"
 
 #. Tag: title
-#: using-d-i.xml:2427
+#: using-d-i.xml:2436
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr "<command>arcboot</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2428
+#: using-d-i.xml:2437
 #, fuzzy, no-c-format
 msgid ""
 "The boot loader on SGI machines is <command>arcboot</command>. It has to be "
@@ -3340,13 +3344,13 @@ msgstr ""
 "</screen></informalexample> ，然後鍵入 <command>boot</command>。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2447
+#: using-d-i.xml:2456
 #, no-c-format
 msgid "scsi"
 msgstr "scsi"
 
 #. Tag: para
-#: using-d-i.xml:2448
+#: using-d-i.xml:2457
 #, no-c-format
 msgid ""
 "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the "
@@ -3354,13 +3358,13 @@ msgid ""
 msgstr "是啟動的 SCSI 匯流排， <userinput>0</userinput> 為主機板內建控制器"
 
 #. Tag: replaceable
-#: using-d-i.xml:2456
+#: using-d-i.xml:2465
 #, no-c-format
 msgid "disk"
 msgstr "disk"
 
 #. Tag: para
-#: using-d-i.xml:2457
+#: using-d-i.xml:2466
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>arcboot</command> is "
@@ -3369,13 +3373,13 @@ msgstr "是硬碟的 SCSI ID，<command>arcboot</command> 安裝在其上"
 
 # index.docbook:1643, index.docbook:1712
 #. Tag: replaceable
-#: using-d-i.xml:2465 using-d-i.xml:2534
+#: using-d-i.xml:2474 using-d-i.xml:2543
 #, no-c-format
 msgid "partnr"
 msgstr "partnr"
 
 #. Tag: para
-#: using-d-i.xml:2466
+#: using-d-i.xml:2475
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/arcboot.conf</"
@@ -3383,13 +3387,13 @@ msgid ""
 msgstr "<filename>/etc/arcboot.conf</filename> 所處分割區編號。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2474
+#: using-d-i.xml:2483
 #, no-c-format
 msgid "config"
 msgstr "config"
 
 #. Tag: para
-#: using-d-i.xml:2475
+#: using-d-i.xml:2484
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/arcboot.conf</"
@@ -3399,13 +3403,13 @@ msgstr ""
 "<quote>linux</quote> 。"
 
 #. Tag: title
-#: using-d-i.xml:2496
+#: using-d-i.xml:2505
 #, no-c-format
 msgid "<command>delo</command>-installer"
 msgstr "<command>delo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2497
+#: using-d-i.xml:2506
 #, no-c-format
 msgid ""
 "The boot loader on DECstations is <command>DELO</command>. It has to be "
@@ -3431,13 +3435,13 @@ msgstr ""
 "</screen></informalexample> 。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2516
+#: using-d-i.xml:2525
 #, no-c-format
 msgid "<replaceable>#</replaceable>"
 msgstr "<replaceable>#</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2517
+#: using-d-i.xml:2526
 #, no-c-format
 msgid ""
 "is the TurboChannel device to be booted from, on most DECstations this is "
@@ -3447,20 +3451,20 @@ msgstr ""
 "<userinput>3</userinput>"
 
 #. Tag: replaceable
-#: using-d-i.xml:2525
+#: using-d-i.xml:2534
 #, no-c-format
 msgid "<replaceable>id</replaceable>"
 msgstr "<replaceable>id</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2535
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>DELO</command> is installed"
 msgstr "<command>DELO</command> 所處的硬碟的 SCSI ID。"
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2544
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/delo.conf</filename> "
@@ -3468,13 +3472,13 @@ msgid ""
 msgstr "<filename>/etc/delo.conf</filename> 所處的分割區號。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2543
+#: using-d-i.xml:2552
 #, no-c-format
 msgid "name"
 msgstr "name"
 
 #. Tag: para
-#: using-d-i.xml:2544
+#: using-d-i.xml:2553
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/delo.conf</"
@@ -3484,7 +3488,7 @@ msgstr ""
 "quote>"
 
 #. Tag: para
-#: using-d-i.xml:2554
+#: using-d-i.xml:2563
 #, no-c-format
 msgid ""
 "In case <filename>/etc/delo.conf</filename> is on the first partition on the "
@@ -3494,19 +3498,19 @@ msgstr ""
 "預設的開機設定，但也可以用"
 
 #. Tag: screen
-#: using-d-i.xml:2560
+#: using-d-i.xml:2569
 #, no-c-format
 msgid "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 msgstr "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 
 #. Tag: title
-#: using-d-i.xml:2570
+#: using-d-i.xml:2579
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "安裝 <command>Yaboot</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2571
+#: using-d-i.xml:2580
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -3524,13 +3528,13 @@ msgstr ""
 "將設為啟動 &debian;。"
 
 #. Tag: title
-#: using-d-i.xml:2589
+#: using-d-i.xml:2598
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "安裝 <command>Quik</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2590
+#: using-d-i.xml:2599
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -3544,13 +3548,13 @@ msgstr ""
 "作。"
 
 #. Tag: title
-#: using-d-i.xml:2606
+#: using-d-i.xml:2615
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2607
+#: using-d-i.xml:2616
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -3565,13 +3569,13 @@ msgstr ""
 "Commands</quote>，它位於 IBM 的 developerWorks 網站 <command>ZIPL</command>。"
 
 #. Tag: title
-#: using-d-i.xml:2624
+#: using-d-i.xml:2633
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>SILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2626
+#: using-d-i.xml:2635
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -3599,13 +3603,13 @@ msgstr ""
 "SunOS/Solaris 的系統很有用。"
 
 #. Tag: title
-#: using-d-i.xml:2651
+#: using-d-i.xml:2660
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "不使用 boot-loader 繼續進行"
 
 #. Tag: para
-#: using-d-i.xml:2653
+#: using-d-i.xml:2662
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -3621,7 +3625,7 @@ msgstr ""
 "存在於機器上，以用於啟動 GNU/Linux。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2662
+#: using-d-i.xml:2671
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -3640,13 +3644,13 @@ msgstr ""
 "filename> 到一個獨立的分割區，還需要 <filename>/boot</filename> 檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:2679
+#: using-d-i.xml:2688
 #, fuzzy, no-c-format
 msgid "Finishing the Installation"
 msgstr "完成安裝並重開機"
 
 #. Tag: para
-#: using-d-i.xml:2680
+#: using-d-i.xml:2689
 #, fuzzy, no-c-format
 msgid ""
 "These are the last bits to do before rebooting to your new system. It mostly "
@@ -3654,13 +3658,13 @@ msgid ""
 msgstr "在啟動新 Debian 之前還有一些最後工作，主要是 &d-i; 之後的整理。"
 
 #. Tag: title
-#: using-d-i.xml:2692
+#: using-d-i.xml:2701
 #, no-c-format
 msgid "Finish the Installation and Reboot"
 msgstr "完成安裝並重開機"
 
 #. Tag: para
-#: using-d-i.xml:2694
+#: using-d-i.xml:2703
 #, no-c-format
 msgid ""
 "This is the last step in the initial Debian installation process. You will "
@@ -3672,7 +3676,7 @@ msgstr ""
 "碟等)。安裝程式將完成最後的工作，然後啟動您的新 Debian 系統。"
 
 #. Tag: para
-#: using-d-i.xml:2701
+#: using-d-i.xml:2710
 #, no-c-format
 msgid ""
 "Select the <guimenuitem>Finish the installation</guimenuitem> menu item "
@@ -3685,13 +3689,13 @@ msgstr ""
 "Linux，它在安裝步驟第一步裡被選做根檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:2715
+#: using-d-i.xml:2724
 #, no-c-format
 msgid "Miscellaneous"
 msgstr "雜項"
 
 #. Tag: para
-#: using-d-i.xml:2716
+#: using-d-i.xml:2725
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -3702,13 +3706,13 @@ msgstr ""
 "題。"
 
 #. Tag: title
-#: using-d-i.xml:2729
+#: using-d-i.xml:2738
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "保存安裝記錄"
 
 #. Tag: para
-#: using-d-i.xml:2731
+#: using-d-i.xml:2740
 #, fuzzy, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -3719,7 +3723,7 @@ msgstr ""
 "<filename>/var/log/debian-installer/</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2738
+#: using-d-i.xml:2747
 #, fuzzy, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -3733,13 +3737,13 @@ msgstr ""
 "用於報告的附件。"
 
 #. Tag: title
-#: using-d-i.xml:2758
+#: using-d-i.xml:2767
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "使用 Shell 查看記錄"
 
 #. Tag: para
-#: using-d-i.xml:2760
+#: using-d-i.xml:2769
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -3755,7 +3759,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2778
+#: using-d-i.xml:2787
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -3765,7 +3769,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2785
+#: using-d-i.xml:2794
 #, fuzzy, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -3781,7 +3785,7 @@ msgstr ""
 "shell 有一些好用的特性，如自動完成與歷史紀錄。"
 
 #. Tag: para
-#: using-d-i.xml:2794
+#: using-d-i.xml:2803
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -3790,7 +3794,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2801
+#: using-d-i.xml:2810
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -3799,7 +3803,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2807
+#: using-d-i.xml:2816
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -3809,13 +3813,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2822
+#: using-d-i.xml:2831
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2824
+#: using-d-i.xml:2833
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -3827,7 +3831,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2834
+#: using-d-i.xml:2843
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -3841,7 +3845,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2847
+#: using-d-i.xml:2856
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -3849,7 +3853,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2852
+#: using-d-i.xml:2861
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -3863,7 +3867,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2864
+#: using-d-i.xml:2873
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -3872,7 +3876,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2870
+#: using-d-i.xml:2879
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -3891,7 +3895,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2887
+#: using-d-i.xml:2896
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -3903,7 +3907,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2896
+#: using-d-i.xml:2905
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -3916,7 +3920,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2906
+#: using-d-i.xml:2915
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -3927,7 +3931,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2914
+#: using-d-i.xml:2923
 #, no-c-format
 msgid ""
 "Also, if you are running the SSH session from an X terminal, you should not "