[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 248 insertions, 228 deletions

diff --git a/po/zh_CN/using-d-i.po b/po/zh_CN/using-d-i.po
index a9b46444e..73c5fc465 100644
--- a/po/zh_CN/using-d-i.po
+++ b/po/zh_CN/using-d-i.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2008-03-07 01:09+0000\n"
+"POT-Creation-Date: 2008-03-16 00:10+0000\n"
 "PO-Revision-Date: 2008-01-21 15:52+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -1915,10 +1915,30 @@ msgstr ""
 #: using-d-i.xml:1306
 #, no-c-format
 msgid ""
+"Make sure that the system can be booted with the partitioning scheme you are "
+"planning. In general it will be necessary to create a separate file system "
+"for <filename>/boot</filename> when using RAID for the root (<filename>/</"
+"filename>) file system. Most boot loaders <phrase arch=\"x86\">(including "
+"lilo and grub)</phrase> do support mirrored (not striped!) RAID1, so using "
+"for example RAID5 for <filename>/</filename> and RAID1 for <filename>/boot</"
+"filename> can be an option."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:1318
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Support for MD is a relatively new addition to the installer. You may "
+#| "experience problems for some RAID levels and in combination with some "
+#| "bootloaders if you try to use MD for the root (<filename>/</filename>) "
+#| "filesystem. For experienced users, it may be possible to work around some "
+#| "of these problems by executing some configuration or installation steps "
+#| "manually from a shell."
+msgid ""
 "Support for MD is a relatively new addition to the installer. You may "
 "experience problems for some RAID levels and in combination with some "
-"bootloaders if you try to use MD for the root (<filename>/</filename>) "
-"filesystem. For experienced users, it may be possible to work around some of "
+"bootloaders if you try to use MD for the root (<filename>/</filename>) file "
+"system. For experienced users, it may be possible to work around some of "
 "these problems by executing some configuration or installation steps "
 "manually from a shell."
 msgstr ""
@@ -1927,7 +1947,7 @@ msgstr ""
 "验的用户，从 shell 手动地处理一些配置和安装步骤，也许会绕开这些问题。"
 
 #. Tag: para
-#: using-d-i.xml:1315
+#: using-d-i.xml:1327
 #, no-c-format
 msgid ""
 "Next, you should choose <guimenuitem>Configure software RAID</guimenuitem> "
@@ -1947,7 +1967,7 @@ msgstr ""
 "RAID1)。后续操作会根据您选择的 MD 类型而定。"
 
 #. Tag: para
-#: using-d-i.xml:1328
+#: using-d-i.xml:1340
 #, no-c-format
 msgid ""
 "RAID0 is simple &mdash; you will be issued with the list of available RAID "
@@ -1958,7 +1978,7 @@ msgstr ""
 "组成 MD 的分区。"
 
 #. Tag: para
-#: using-d-i.xml:1335
+#: using-d-i.xml:1347
 #, no-c-format
 msgid ""
 "RAID1 is a bit more tricky. First, you will be asked to enter the number of "
@@ -1975,7 +1995,7 @@ msgstr ""
 "将不会允许您继续下去，直到纠正错误。"
 
 #. Tag: para
-#: using-d-i.xml:1347
+#: using-d-i.xml:1359
 #, no-c-format
 msgid ""
 "RAID5 has a similar setup procedure as RAID1 with the exception that you "
@@ -1985,7 +2005,7 @@ msgstr ""
 "区。"
 
 #. Tag: para
-#: using-d-i.xml:1355
+#: using-d-i.xml:1367
 #, no-c-format
 msgid ""
 "It is perfectly possible to have several types of MD at once. For example, "
@@ -2001,7 +2021,7 @@ msgstr ""
 "RAID1 (相当可靠的 100 GB 分区用于 <filename>/home</filename>)。"
 
 #. Tag: para
-#: using-d-i.xml:1364
+#: using-d-i.xml:1376
 #, no-c-format
 msgid ""
 "After you setup MD devices to your liking, you can <guimenuitem>Finish</"
@@ -2014,13 +2034,13 @@ msgstr ""
 "您的新 MD 设备，并分配挂载点这样的属性。"
 
 #. Tag: title
-#: using-d-i.xml:1379
+#: using-d-i.xml:1391
 #, no-c-format
 msgid "Configuring the Logical Volume Manager (LVM)"
 msgstr "配置逻辑卷管理(LVM)"
 
 #. Tag: para
-#: using-d-i.xml:1380
+#: using-d-i.xml:1392
 #, no-c-format
 msgid ""
 "If you are working with computers at the level of system administrator or "
@@ -2034,7 +2054,7 @@ msgstr ""
 "或符号链接等方法来折腾。"
 
 #. Tag: para
-#: using-d-i.xml:1388
+#: using-d-i.xml:1400
 #, no-c-format
 msgid ""
 "To avoid the described situation you can use Logical Volume Manager (LVM). "
@@ -2052,7 +2072,7 @@ msgstr ""
 "点在于它可以跨越多个物理磁盘。"
 
 #. Tag: para
-#: using-d-i.xml:1398
+#: using-d-i.xml:1410
 #, no-c-format
 msgid ""
 "Now when you realize you need more space for your old 160GB <filename>/home</"
@@ -2070,7 +2090,7 @@ msgstr ""
 "阅 <ulink url=\"&url-lvm-howto;\">LVM HOWTO</ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:1409
+#: using-d-i.xml:1421
 #, no-c-format
 msgid ""
 "LVM setup in &d-i; is quite simple and completely supported inside "
@@ -2085,7 +2105,7 @@ msgstr ""
 "<guimenuitem>physical volume for LVM</guimenuitem> </menuchoice>"
 
 #. Tag: para
-#: using-d-i.xml:1418
+#: using-d-i.xml:1430
 #, no-c-format
 msgid ""
 "When you return to the main <command>partman</command> screen, you will see "
@@ -2102,7 +2122,7 @@ msgstr ""
 "了 LVM 配置的小结。菜单项本身是与内容相关，只显示可用的操作。可能的操作有："
 
 #. Tag: para
-#: using-d-i.xml:1429
+#: using-d-i.xml:1441
 #, no-c-format
 msgid ""
 "<guimenuitem>Display configuration details</guimenuitem>: shows LVM device "
@@ -2112,43 +2132,43 @@ msgstr ""
 "名称和逻辑卷尺寸等"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1434
+#: using-d-i.xml:1446
 #, no-c-format
 msgid "Create volume group"
 msgstr "Create volume group"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1437
+#: using-d-i.xml:1449
 #, no-c-format
 msgid "Create logical volume"
 msgstr "Create logical volume"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1440
+#: using-d-i.xml:1452
 #, no-c-format
 msgid "Delete volume group"
 msgstr "Delete volume group"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1443
+#: using-d-i.xml:1455
 #, no-c-format
 msgid "Delete logical volume"
 msgstr "Delete logical volume"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1446
+#: using-d-i.xml:1458
 #, no-c-format
 msgid "Extend volume group"
 msgstr "Extend volume group"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1449
+#: using-d-i.xml:1461
 #, no-c-format
 msgid "Reduce volume group"
 msgstr "Reduce volume group"
 
 #. Tag: para
-#: using-d-i.xml:1451
+#: using-d-i.xml:1463
 #, no-c-format
 msgid ""
 "<guimenuitem>Finish</guimenuitem>: return to the main <command>partman</"
@@ -2157,7 +2177,7 @@ msgstr ""
 "<guimenuitem>Finish</guimenuitem>: 返回 <command>partman</command> 主界面"
 
 #. Tag: para
-#: using-d-i.xml:1457
+#: using-d-i.xml:1469
 #, no-c-format
 msgid ""
 "Use the options in that menu to first create a volume group and then create "
@@ -2165,7 +2185,7 @@ msgid ""
 msgstr "使用该菜单内的选项首先创建卷组，然后在里面创建逻辑卷。"
 
 #. Tag: para
-#: using-d-i.xml:1462
+#: using-d-i.xml:1474
 #, no-c-format
 msgid ""
 "After you return to the main <command>partman</command> screen, any created "
@@ -2176,13 +2196,13 @@ msgstr ""
 "通的分区一样(您也应该这样对待它们)。"
 
 #. Tag: title
-#: using-d-i.xml:1476
+#: using-d-i.xml:1488
 #, no-c-format
 msgid "Configuring Encrypted Volumes"
 msgstr "配置加密卷"
 
 #. Tag: para
-#: using-d-i.xml:1477
+#: using-d-i.xml:1489
 #, no-c-format
 msgid ""
 "&d-i; allows you to set up encrypted partitions. Every file you write to "
@@ -2200,7 +2220,7 @@ msgstr ""
 "许可以访问硬盘，但是没有正确的口令，硬盘上的数据看起来就像是随机的字符。"
 
 #. Tag: para
-#: using-d-i.xml:1489
+#: using-d-i.xml:1501
 #, no-c-format
 msgid ""
 "The two most important partitions to encrypt are: the home partition, where "
@@ -2223,7 +2243,7 @@ msgstr ""
 "加载内核。"
 
 #. Tag: para
-#: using-d-i.xml:1504
+#: using-d-i.xml:1516
 #, no-c-format
 msgid ""
 "Please note that the performance of encrypted partitions will be less than "
@@ -2235,7 +2255,7 @@ msgstr ""
 "密和解密。性能将与您的 CPU 速度、选择的加密算法和密钥长度紧密相关。"
 
 #. Tag: para
-#: using-d-i.xml:1511
+#: using-d-i.xml:1523
 #, no-c-format
 msgid ""
 "To use encryption, you have to create a new partition by selecting some free "
@@ -2253,7 +2273,7 @@ msgstr ""
 "guimenu> </menuchoice> 选项。菜单将包含分区的加密选项。"
 
 #. Tag: para
-#: using-d-i.xml:1522
+#: using-d-i.xml:1534
 #, no-c-format
 msgid ""
 "&d-i; supports several encryption methods. The default method is "
@@ -2268,7 +2288,7 @@ msgstr ""
 "使用默认的方法。"
 
 #. Tag: para
-#: using-d-i.xml:1534
+#: using-d-i.xml:1546
 #, no-c-format
 msgid ""
 "First, let's have a look at the options available when you select "
@@ -2281,13 +2301,13 @@ msgstr ""
 "的安全考虑的选择。"
 
 #. Tag: term
-#: using-d-i.xml:1544
+#: using-d-i.xml:1556
 #, no-c-format
 msgid "Encryption: <userinput>aes</userinput>"
 msgstr "Encryption: <userinput>aes</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1546
+#: using-d-i.xml:1558
 #, no-c-format
 msgid ""
 "This option lets you select the encryption algorithm (<firstterm>cipher</"
@@ -2310,13 +2330,13 @@ msgstr ""
 "纪的敏感信息。"
 
 #. Tag: term
-#: using-d-i.xml:1564
+#: using-d-i.xml:1576
 #, no-c-format
 msgid "Key size: <userinput>256</userinput>"
 msgstr "Key size: <userinput>256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1566
+#: using-d-i.xml:1578
 #, no-c-format
 msgid ""
 "Here you can specify the length of the encryption key. With a larger key "
@@ -2328,13 +2348,13 @@ msgstr ""
 "加长度自然会降低性能。cipher 决定可用的密钥长度。"
 
 #. Tag: term
-#: using-d-i.xml:1578
+#: using-d-i.xml:1590
 #, no-c-format
 msgid "IV algorithm: <userinput>cbc-essiv:sha256</userinput>"
 msgstr "IV algorithm: <userinput>cbc-essiv:sha256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1580
+#: using-d-i.xml:1592
 #, no-c-format
 msgid ""
 "The <firstterm>Initialization Vector</firstterm> or <firstterm>IV</"
@@ -2350,7 +2370,7 @@ msgstr ""
 "复模板推断信息。"
 
 #. Tag: para
-#: using-d-i.xml:1590
+#: using-d-i.xml:1602
 #, no-c-format
 msgid ""
 "From the provided alternatives, the default <userinput>cbc-essiv:sha256</"
@@ -2363,25 +2383,25 @@ msgstr ""
 "法时，才使用其他的算法。"
 
 #. Tag: term
-#: using-d-i.xml:1602
+#: using-d-i.xml:1614
 #, no-c-format
 msgid "Encryption key: <userinput>Passphrase</userinput>"
 msgstr "Encryption key: <userinput>Passphrase</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1604
+#: using-d-i.xml:1616
 #, no-c-format
 msgid "Here you can choose the type of the encryption key for this partition."
 msgstr "这里您可以为分区选择所使用的加密密钥类型。"
 
 #. Tag: term
-#: using-d-i.xml:1610
+#: using-d-i.xml:1622
 #, no-c-format
 msgid "Passphrase"
 msgstr "Passphrase"
 
 #. Tag: para
-#: using-d-i.xml:1611
+#: using-d-i.xml:1623
 #, no-c-format
 msgid ""
 "The encryption key will be computed<footnote> <para> Using a passphrase as "
@@ -2394,13 +2414,13 @@ msgstr ""
 "使用时要求输入。"
 
 #. Tag: term
-#: using-d-i.xml:1626 using-d-i.xml:1719
+#: using-d-i.xml:1638 using-d-i.xml:1731
 #, no-c-format
 msgid "Random key"
 msgstr "Random key"
 
 #. Tag: para
-#: using-d-i.xml:1627
+#: using-d-i.xml:1639
 #, no-c-format
 msgid ""
 "A new encryption key will be generated from random data each time you try to "
@@ -2415,7 +2435,7 @@ msgstr ""
 "面临暴力破解，但是除非加密算法中有未知的弱点，这辈子也不会被攻破。)"
 
 #. Tag: para
-#: using-d-i.xml:1636
+#: using-d-i.xml:1648
 #, no-c-format
 msgid ""
 "Random keys are useful for swap partitions because you do not need to bother "
@@ -2432,13 +2452,13 @@ msgstr ""
 "写入到交换分区的数据。"
 
 #. Tag: term
-#: using-d-i.xml:1655 using-d-i.xml:1732
+#: using-d-i.xml:1667 using-d-i.xml:1744
 #, no-c-format
 msgid "Erase data: <userinput>yes</userinput>"
 msgstr "Erase data: <userinput>yes</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1657
+#: using-d-i.xml:1669
 #, no-c-format
 msgid ""
 "Determines whether the content of this partition should be overwritten with "
@@ -2456,7 +2476,7 @@ msgstr ""
 "备上的数据。</para></footnote>。"
 
 #. Tag: para
-#: using-d-i.xml:1677
+#: using-d-i.xml:1689
 #, no-c-format
 msgid ""
 "If you select <menuchoice> <guimenu>Encryption method:</guimenu> "
@@ -2468,13 +2488,13 @@ msgstr ""
 "下面内容："
 
 #. Tag: term
-#: using-d-i.xml:1686
+#: using-d-i.xml:1698
 #, no-c-format
 msgid "Encryption: <userinput>AES256</userinput>"
 msgstr "Encryption: <userinput>AES256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1688
+#: using-d-i.xml:1700
 #, no-c-format
 msgid ""
 "For loop-AES, unlike dm-crypt, the options for cipher and key size are "
@@ -2485,25 +2505,25 @@ msgstr ""
 "时选取。请查阅前面关于 cipher 和密钥长度的章节了解更多信息。"
 
 #. Tag: term
-#: using-d-i.xml:1698
+#: using-d-i.xml:1710
 #, no-c-format
 msgid "Encryption key: <userinput>Keyfile (GnuPG)</userinput>"
 msgstr "Encryption key: <userinput>Keyfile (GnuPG)</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1700
+#: using-d-i.xml:1712
 #, no-c-format
 msgid "Here you can select the type of the encryption key for this partition."
 msgstr "这里您可以为分区选择加密密钥的类型。"
 
 #. Tag: term
-#: using-d-i.xml:1706
+#: using-d-i.xml:1718
 #, no-c-format
 msgid "Keyfile (GnuPG)"
 msgstr "Keyfile (GnuPG)"
 
 #. Tag: para
-#: using-d-i.xml:1707
+#: using-d-i.xml:1719
 #, no-c-format
 msgid ""
 "The encryption key will be generated from random data during the "
@@ -2515,19 +2535,19 @@ msgstr ""
 "application> 加密。要使用它，您需要输入正确的 passphrase (在以后会要求提供)。"
 
 #. Tag: para
-#: using-d-i.xml:1720
+#: using-d-i.xml:1732
 #, no-c-format
 msgid "Please see the section on random keys above."
 msgstr "请查阅前面有关随机密钥的章节。"
 
 #. Tag: para
-#: using-d-i.xml:1734
+#: using-d-i.xml:1746
 #, no-c-format
 msgid "Please see the the section on erasing data above."
 msgstr "请查阅前面有关删除数据的章节。"
 
 #. Tag: para
-#: using-d-i.xml:1744
+#: using-d-i.xml:1756
 #, no-c-format
 msgid ""
 "Please note that the <emphasis>graphical</emphasis> version of the installer "
@@ -2539,7 +2559,7 @@ msgstr ""
 "于加密，您将只能使用 <emphasis>passphrases</emphasis> 作为加密密钥建立卷。"
 
 #. Tag: para
-#: using-d-i.xml:1752
+#: using-d-i.xml:1764
 #, no-c-format
 msgid ""
 "After you have selected the desired parameters for your encrypted "
@@ -2554,7 +2574,7 @@ msgstr ""
 "标记分区上的数据，以及写新分区表等动作。对于大的分区，这会花一些时间。"
 
 #. Tag: para
-#: using-d-i.xml:1762
+#: using-d-i.xml:1774
 #, no-c-format
 msgid ""
 "Next you will be asked to enter a passphrase for partitions configured to "
@@ -2568,7 +2588,7 @@ msgstr ""
 "(比如生日、爱好、宠物的名字、以及家里其他成员的名字，等等)。"
 
 #. Tag: para
-#: using-d-i.xml:1771
+#: using-d-i.xml:1783
 #, no-c-format
 msgid ""
 "Before you input any passphrases, you should have made sure that your "
@@ -2588,7 +2608,7 @@ msgstr ""
 "所选择的键盘布局未能正确建立，而且是在为根文件系统输入 passphrase 的时候。"
 
 #. Tag: para
-#: using-d-i.xml:1784
+#: using-d-i.xml:1796
 #, no-c-format
 msgid ""
 "If you selected to use methods other than a passphrase to create encryption "
@@ -2607,7 +2627,7 @@ msgstr ""
 "程在每个要加密的分区重复进行。"
 
 #. Tag: para
-#: using-d-i.xml:1800
+#: using-d-i.xml:1812
 #, no-c-format
 msgid ""
 "After returning to the main partitioning menu, you will see all encrypted "
@@ -2638,7 +2658,7 @@ msgstr ""
 "您不合适，可以进行修改。"
 
 #. Tag: para
-#: using-d-i.xml:1813
+#: using-d-i.xml:1825
 #, no-c-format
 msgid ""
 "One thing to note here are the identifiers in parentheses "
@@ -2655,7 +2675,7 @@ msgstr ""
 "程的差异，将在后面的 <xref linkend=\"mount-encrypted-volumes\"/> 说明。"
 
 #. Tag: para
-#: using-d-i.xml:1823
+#: using-d-i.xml:1835
 #, no-c-format
 msgid ""
 "Once you are satisfied with the partitioning scheme, continue with the "
@@ -2663,13 +2683,13 @@ msgid ""
 msgstr "当您满意分区之后，可以继续安装过程。"
 
 #. Tag: title
-#: using-d-i.xml:1834
+#: using-d-i.xml:1846
 #, no-c-format
 msgid "Installing the Base System"
 msgstr "安装基本系统"
 
 #. Tag: para
-#: using-d-i.xml:1835
+#: using-d-i.xml:1847
 #, no-c-format
 msgid ""
 "Although this stage is the least problematic, it consumes a significant "
@@ -2681,7 +2701,7 @@ msgstr ""
 "果您用较慢的计算机或网络，这要花费好一会儿时间。"
 
 #. Tag: para
-#: using-d-i.xml:1848
+#: using-d-i.xml:1860
 #, no-c-format
 msgid ""
 "During installation of the base system, package unpacking and setup messages "
@@ -2696,7 +2716,7 @@ msgstr ""
 "keycap><keycap>F1</keycap></keycombo>。"
 
 #. Tag: para
-#: using-d-i.xml:1857
+#: using-d-i.xml:1869
 #, no-c-format
 msgid ""
 "The unpack/setup messages generated during this phase are also saved in "
@@ -2707,7 +2727,7 @@ msgstr ""
 "<filename>/var/log/syslog</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:1863
+#: using-d-i.xml:1875
 #, no-c-format
 msgid ""
 "As part of the installation, a Linux kernel will be installed. At the "
@@ -2719,13 +2739,13 @@ msgstr ""
 "您硬件最匹配的内核。在较低的优先级下，您可以从列表中选择一个有效的内核。"
 
 #. Tag: title
-#: using-d-i.xml:1875
+#: using-d-i.xml:1887
 #, no-c-format
 msgid "Setting Up Users And Passwords"
 msgstr "设置用户和密码"
 
 #. Tag: para
-#: using-d-i.xml:1876
+#: using-d-i.xml:1888
 #, no-c-format
 msgid ""
 "After the base system has been installed, the installer will allow you to "
@@ -2736,13 +2756,13 @@ msgstr ""
 "号。其他的用户帐号可以在安装完成之后创建。"
 
 #. Tag: title
-#: using-d-i.xml:1890
+#: using-d-i.xml:1902
 #, no-c-format
 msgid "Set the Root Password"
 msgstr "设置 root 密码"
 
 #. Tag: para
-#: using-d-i.xml:1894
+#: using-d-i.xml:1906
 #, no-c-format
 msgid ""
 "The <emphasis>root</emphasis> account is also called the <emphasis>super-"
@@ -2755,7 +2775,7 @@ msgstr ""
 "理，而且使用时间应该尽可能短。"
 
 #. Tag: para
-#: using-d-i.xml:1902
+#: using-d-i.xml:1914
 #, no-c-format
 msgid ""
 "Any password you create should contain at least 6 characters, and should "
@@ -2769,7 +2789,7 @@ msgstr ""
 "小心。请避免采用能够在字典中查到的单词或者很容易猜测的个人信息。"
 
 #. Tag: para
-#: using-d-i.xml:1910
+#: using-d-i.xml:1922
 #, no-c-format
 msgid ""
 "If anyone ever tells you they need your root password, be extremely wary. "
@@ -2780,13 +2800,13 @@ msgstr ""
 "员，否则通常不应该将超级用户密码交给别人。"
 
 #. Tag: title
-#: using-d-i.xml:1920
+#: using-d-i.xml:1932
 #, no-c-format
 msgid "Create an Ordinary User"
 msgstr "创建一个普通用户"
 
 #. Tag: para
-#: using-d-i.xml:1922
+#: using-d-i.xml:1934
 #, no-c-format
 msgid ""
 "The system will ask you whether you wish to create an ordinary user account "
@@ -2798,7 +2818,7 @@ msgstr ""
 "记，平时<emphasis>不要</emphasis>使用 root 帐户登录或者将其作为个人帐号使用。"
 
 #. Tag: para
-#: using-d-i.xml:1931
+#: using-d-i.xml:1943
 #, no-c-format
 msgid ""
 "Why not? Well, one reason to avoid using root's privileges is that it is "
@@ -2816,7 +2836,7 @@ msgstr ""
 "容，建议找一本进行学习。"
 
 #. Tag: para
-#: using-d-i.xml:1941
+#: using-d-i.xml:1953
 #, no-c-format
 msgid ""
 "You will first be prompted for the user's full name. Then you'll be asked "
@@ -2828,7 +2848,7 @@ msgstr ""
 "便满足要求，并为缺省值。最后，您将要求输入该帐号的密码。"
 
 #. Tag: para
-#: using-d-i.xml:1948
+#: using-d-i.xml:1960
 #, no-c-format
 msgid ""
 "If at any point after installation you would like to create another account, "
@@ -2838,13 +2858,13 @@ msgstr ""
 "令。"
 
 #. Tag: title
-#: using-d-i.xml:1959
+#: using-d-i.xml:1971
 #, no-c-format
 msgid "Installing Additional Software"
 msgstr "安装额外的软件"
 
 #. Tag: para
-#: using-d-i.xml:1960
+#: using-d-i.xml:1972
 #, no-c-format
 msgid ""
 "At this point you have a usable but limited system. Most users will want to "
@@ -2857,13 +2877,13 @@ msgstr ""
 "装基本系统还要花时间。"
 
 #. Tag: title
-#: using-d-i.xml:1975
+#: using-d-i.xml:1987
 #, no-c-format
 msgid "Configuring apt"
 msgstr "配置 apt"
 
 #. Tag: para
-#: using-d-i.xml:1977
+#: using-d-i.xml:1989
 #, no-c-format
 msgid ""
 "One of the tools used to install packages on a &debian; system is a program "
@@ -2894,7 +2914,7 @@ msgstr ""
 "软件包管理工具使用。"
 
 #. Tag: para
-#: using-d-i.xml:2001
+#: using-d-i.xml:2013
 #, no-c-format
 msgid ""
 "<command>apt</command> must be configured so that it knows from where to "
@@ -2907,7 +2927,7 @@ msgstr ""
 "并编辑成自己喜欢的地方。"
 
 #. Tag: para
-#: using-d-i.xml:2008
+#: using-d-i.xml:2020
 #, no-c-format
 msgid ""
 "If you are installing at default priority, the installer will largely take "
@@ -2922,7 +2942,7 @@ msgstr ""
 "序程序会自动加上安全镜像，它是 <quote>volatile</quote> 更新服务的镜像。"
 
 #. Tag: para
-#: using-d-i.xml:2017
+#: using-d-i.xml:2029
 #, no-c-format
 msgid ""
 "If you are installing at a lower priority (e.g. in expert mode), you will be "
@@ -2936,13 +2956,13 @@ msgstr ""
 "和 <quote>non-free</quote> 软件仓库里面添加软件包。"
 
 #. Tag: title
-#: using-d-i.xml:2028
+#: using-d-i.xml:2040
 #, no-c-format
 msgid "Installing from more than one CD or DVD"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2030
+#: using-d-i.xml:2042
 #, no-c-format
 msgid ""
 "If you are installing from a CD or a DVD that is part of a larger set, the "
@@ -2952,7 +2972,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2037
+#: using-d-i.xml:2049
 #, no-c-format
 msgid ""
 "If you do not have any additional CDs or DVDs, that is no problem: using "
@@ -2962,7 +2982,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2045
+#: using-d-i.xml:2057
 #, no-c-format
 msgid ""
 "Packages are included on CDs (and DVDs) in the order of their popularity. "
@@ -2972,7 +2992,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2052
+#: using-d-i.xml:2064
 #, no-c-format
 msgid ""
 "It also means that buying or downloading and burning a full CD set is just a "
@@ -2983,7 +3003,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2061
+#: using-d-i.xml:2073
 #, no-c-format
 msgid ""
 "A good rule of thumb is that for a regular desktop installation (using the "
@@ -2993,7 +3013,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2069
+#: using-d-i.xml:2081
 #, no-c-format
 msgid ""
 "If you do scan multiple CDs or DVDs, the installer will prompt you to "
@@ -3005,13 +3025,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2082
+#: using-d-i.xml:2094
 #, no-c-format
 msgid "Using a network mirror"
 msgstr "使用网络镜像"
 
 #. Tag: para
-#: using-d-i.xml:2084
+#: using-d-i.xml:2096
 #, fuzzy, no-c-format
 #| msgid ""
 #| "One question that will be asked in most cases is whether or not to use a "
@@ -3026,7 +3046,7 @@ msgstr ""
 "案会很好，但还是有一些例外。"
 
 #. Tag: para
-#: using-d-i.xml:2090
+#: using-d-i.xml:2102
 #, no-c-format
 msgid ""
 "If you are <emphasis>not</emphasis> installing from a full CD or DVD or "
@@ -3042,7 +3062,7 @@ msgstr ""
 "<literal>desktop</literal> 任务。"
 
 #. Tag: para
-#: using-d-i.xml:2099
+#: using-d-i.xml:2111
 #, fuzzy, no-c-format
 #| msgid ""
 #| "If you are installing from a full CD or using a CD image (not DVD), using "
@@ -3072,7 +3092,7 @@ msgstr ""
 "的软件包。"
 
 #. Tag: para
-#: using-d-i.xml:2110
+#: using-d-i.xml:2122
 #, no-c-format
 msgid ""
 "If you are installing from a DVD or using a DVD image, any packages needed "
@@ -3082,7 +3102,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2117
+#: using-d-i.xml:2129
 #, no-c-format
 msgid ""
 "One advantage of adding a network mirror is that updates that have occurred "
@@ -3093,7 +3113,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2124
+#: using-d-i.xml:2136
 #, fuzzy, no-c-format
 #| msgid ""
 #| "In summary: selecting a network mirror is generally a good idea, except "
@@ -3116,26 +3136,26 @@ msgstr ""
 "些软件包有哪些在 CD/DVD 上。"
 
 #. Tag: para
-#: using-d-i.xml:2133
+#: using-d-i.xml:2145
 #, no-c-format
 msgid "the tasks you select in the next step of the installation,"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2138
+#: using-d-i.xml:2150
 #, no-c-format
 msgid "which packages are needed for those tasks,"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2143
+#: using-d-i.xml:2155
 #, no-c-format
 msgid ""
 "which of those packages are present on the CDs or DVDs you have scanned, and"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2148
+#: using-d-i.xml:2160
 #, no-c-format
 msgid ""
 "whether any updated versions of packages included on the CDs or DVDs are "
@@ -3144,7 +3164,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2157
+#: using-d-i.xml:2169
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Note that even if you choose not to use a network mirror, some packages "
@@ -3161,13 +3181,13 @@ msgstr ""
 "volatile 更新，仍然会从互联网下载更新后的软件包。"
 
 #. Tag: title
-#: using-d-i.xml:2173
+#: using-d-i.xml:2185
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr "选择和安装软件"
 
 #. Tag: para
-#: using-d-i.xml:2175
+#: using-d-i.xml:2187
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -3182,7 +3202,7 @@ msgstr ""
 "来快速建立您的计算机应对各种任务。"
 
 #. Tag: para
-#: using-d-i.xml:2184
+#: using-d-i.xml:2196
 #, no-c-format
 msgid ""
 "So, you have the ability to choose <emphasis>tasks</emphasis> first, and "
@@ -3212,7 +3232,7 @@ msgstr ""
 "空间。"
 
 #. Tag: para
-#: using-d-i.xml:2211
+#: using-d-i.xml:2223
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
@@ -3223,7 +3243,7 @@ msgstr ""
 "些任务。此时甚至可以不选中任何任务。"
 
 #. Tag: para
-#: using-d-i.xml:2218
+#: using-d-i.xml:2230
 #, no-c-format
 msgid ""
 "The <quote>Desktop environment</quote> task will install the GNOME desktop "
@@ -3234,7 +3254,7 @@ msgstr ""
 "选其他的桌面环境，比如 KDE。"
 
 #. Tag: para
-#: using-d-i.xml:2226
+#: using-d-i.xml:2238
 #, no-c-format
 msgid ""
 "It is possible to get the installer to install KDE by using preseeding (see "
@@ -3260,7 +3280,7 @@ msgstr ""
 "安装方法，安装 KDE 就没有问题。"
 
 #. Tag: para
-#: using-d-i.xml:2246
+#: using-d-i.xml:2258
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. DNS "
@@ -3278,7 +3298,7 @@ msgstr ""
 "classname>。"
 
 #. Tag: para
-#: using-d-i.xml:2258
+#: using-d-i.xml:2270
 #, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -3289,7 +3309,7 @@ msgstr ""
 "选中的软件包。"
 
 #. Tag: para
-#: using-d-i.xml:2265
+#: using-d-i.xml:2277
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -3297,7 +3317,7 @@ msgid ""
 msgstr "在安装程序的标准用户界面下，您可以使用空格键切换任务的选择。"
 
 #. Tag: para
-#: using-d-i.xml:2271
+#: using-d-i.xml:2283
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -3312,7 +3332,7 @@ msgstr ""
 "间。一旦启动，安装软件包过程将无法取消。"
 
 #. Tag: para
-#: using-d-i.xml:2280
+#: using-d-i.xml:2292
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -3327,7 +3347,7 @@ msgstr ""
 "新)；如果您安装的是测试版本，这会出现在使用旧映像安装时。"
 
 #. Tag: para
-#: using-d-i.xml:2289
+#: using-d-i.xml:2301
 #, no-c-format
 msgid ""
 "Each package you selected with <command>tasksel</command> is downloaded, "
@@ -3340,13 +3360,13 @@ msgstr ""
 "序需要用户提供信息，它会在此过程中给出提示。"
 
 #. Tag: title
-#: using-d-i.xml:2302
+#: using-d-i.xml:2314
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "创建启动系统"
 
 #. Tag: para
-#: using-d-i.xml:2304
+#: using-d-i.xml:2316
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -3359,13 +3379,13 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/>。</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2319
+#: using-d-i.xml:2331
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "检测其他的操作系统"
 
 #. Tag: para
-#: using-d-i.xml:2321
+#: using-d-i.xml:2333
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -3379,7 +3399,7 @@ msgstr ""
 "Debian 一起，计算机也将配置为可以启动其他操作系统。"
 
 #. Tag: para
-#: using-d-i.xml:2329
+#: using-d-i.xml:2341
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3393,13 +3413,13 @@ msgstr ""
 "管理器的文档了解更多信息。"
 
 #. Tag: title
-#: using-d-i.xml:2347
+#: using-d-i.xml:2359
 #, no-c-format
 msgid "Install <command>aboot</command> on a Hard Disk"
 msgstr "安装 <command>aboot</command> 到硬盘上"
 
 #. Tag: para
-#: using-d-i.xml:2348
+#: using-d-i.xml:2360
 #, no-c-format
 msgid ""
 "If you have booted from SRM and you select this option, the installer will "
@@ -3418,13 +3438,13 @@ msgstr ""
 "装 Debian 的磁盘上装有不同的操作系统，将不得不从一个软盘启动 GNU/Linux。"
 
 #. Tag: title
-#: using-d-i.xml:2368
+#: using-d-i.xml:2380
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2369
+#: using-d-i.xml:2381
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -3439,19 +3459,19 @@ msgstr ""
 "<command>PALO</command> 能真正地读 Linux 分区。"
 
 #. Tag: para
-#: using-d-i.xml:2378
+#: using-d-i.xml:2390
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2390
+#: using-d-i.xml:2402
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "硬盘上 <command>Grub</command> Boot Loader 的安装"
 
 #. Tag: para
-#: using-d-i.xml:2392
+#: using-d-i.xml:2404
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -3462,7 +3482,7 @@ msgstr ""
 "定的 boot loader，它对新手和老手都是一个不错的缺省选择。"
 
 #. Tag: para
-#: using-d-i.xml:2398
+#: using-d-i.xml:2410
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -3474,7 +3494,7 @@ msgstr ""
 "请参阅 grub 的手册。"
 
 #. Tag: para
-#: using-d-i.xml:2404
+#: using-d-i.xml:2416
 #, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -3485,13 +3505,13 @@ msgstr ""
 "用的任何 bootloader。"
 
 #. Tag: title
-#: using-d-i.xml:2417
+#: using-d-i.xml:2429
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "硬盘上 <command>LILO</command> Boot Loader 的安装"
 
 #. Tag: para
-#: using-d-i.xml:2419
+#: using-d-i.xml:2431
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3507,7 +3527,7 @@ msgstr ""
 "HOWTO</ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:2429
+#: using-d-i.xml:2441
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3520,7 +3540,7 @@ msgstr ""
 "统。"
 
 #. Tag: para
-#: using-d-i.xml:2437
+#: using-d-i.xml:2449
 #, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -3528,13 +3548,13 @@ msgid ""
 msgstr "&d-i; 提供给您三种选择去哪安装 <command>LILO</command> boot loader："
 
 #. Tag: term
-#: using-d-i.xml:2444
+#: using-d-i.xml:2456
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "主引导区(MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2444
+#: using-d-i.xml:2456
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3542,13 +3562,13 @@ msgid ""
 msgstr "这种方式 <command>LILO</command> 将完全控制启动过程。"
 
 #. Tag: term
-#: using-d-i.xml:2451
+#: using-d-i.xml:2463
 #, no-c-format
 msgid "new Debian partition"
 msgstr "新 Debian 分区"
 
 #. Tag: para
-#: using-d-i.xml:2451
+#: using-d-i.xml:2463
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3559,13 +3579,13 @@ msgstr ""
 "新 Debian 分区的起始位置，并能作为第二 boot loader。"
 
 #. Tag: term
-#: using-d-i.xml:2460
+#: using-d-i.xml:2472
 #, no-c-format
 msgid "Other choice"
 msgstr "其它选择"
 
 #. Tag: para
-#: using-d-i.xml:2460
+#: using-d-i.xml:2472
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3578,7 +3598,7 @@ msgstr ""
 "filename> 或 <filename>/dev/sda</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2470
+#: using-d-i.xml:2482
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3592,13 +3612,13 @@ msgstr ""
 "录 &mdash; 但这也意味着您要使用其他方法才能启动 Debian！"
 
 #. Tag: title
-#: using-d-i.xml:2486
+#: using-d-i.xml:2498
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "安装 <command>ELILO</command> Boot Loader 到硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2488
+#: using-d-i.xml:2500
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3623,7 +3643,7 @@ msgstr ""
 "和启动 Linux 内核的工作。"
 
 #. Tag: para
-#: using-d-i.xml:2504
+#: using-d-i.xml:2516
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3638,13 +3658,13 @@ msgstr ""
 "<emphasis>root</emphasis> 文件系统相同的磁盘。"
 
 #. Tag: title
-#: using-d-i.xml:2516
+#: using-d-i.xml:2528
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "选择正确的分区！"
 
 #. Tag: para
-#: using-d-i.xml:2518
+#: using-d-i.xml:2530
 #, no-c-format
 msgid ""
 "The criteria for selecting a partition is that it is FAT format filesystem "
@@ -3660,13 +3680,13 @@ msgstr ""
 "有内容！"
 
 #. Tag: title
-#: using-d-i.xml:2533
+#: using-d-i.xml:2545
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI 分区内容"
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2547
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -3692,13 +3712,13 @@ msgstr ""
 "间，系统更新或重新配置，文件系统中也许会有其他文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2557
+#: using-d-i.xml:2569
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2558
+#: using-d-i.xml:2570
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -3709,13 +3729,13 @@ msgstr ""
 "filename> 的复制，其文件名重写成 EFI 分区上的文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2567
+#: using-d-i.xml:2579
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2568
+#: using-d-i.xml:2580
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -3728,13 +3748,13 @@ msgstr ""
 "<quote>EFI Boot Manager</quote> 命令菜单。"
 
 #. Tag: filename
-#: using-d-i.xml:2578
+#: using-d-i.xml:2590
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2579
+#: using-d-i.xml:2591
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -3747,13 +3767,13 @@ msgstr ""
 "filename> 符号链接 <filename>/initrd.img</filename> 指向的文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2591
+#: using-d-i.xml:2603
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2592
+#: using-d-i.xml:2604
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -3764,13 +3784,13 @@ msgstr ""
 "任何本地修改在下次 <filename>/usr/sbin/elilo</filename> 运行时将丢失。"
 
 #. Tag: filename
-#: using-d-i.xml:2602
+#: using-d-i.xml:2614
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2603
+#: using-d-i.xml:2615
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -3783,13 +3803,13 @@ msgstr ""
 "<filename>/vmlinuz</filename> 指向的文件。"
 
 #. Tag: title
-#: using-d-i.xml:2623
+#: using-d-i.xml:2635
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr "<command>arcboot</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2624
+#: using-d-i.xml:2636
 #, no-c-format
 msgid ""
 "The boot loader on SGI machines is <command>arcboot</command>. It has to be "
@@ -3829,13 +3849,13 @@ msgstr ""
 "</screen></informalexample> ，然后键入 <command>boot</command>。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2643
+#: using-d-i.xml:2655
 #, no-c-format
 msgid "scsi"
 msgstr "scsi"
 
 #. Tag: para
-#: using-d-i.xml:2644
+#: using-d-i.xml:2656
 #, no-c-format
 msgid ""
 "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the "
@@ -3843,13 +3863,13 @@ msgid ""
 msgstr "是启动的 SCSI 总线，<userinput>0</userinput> 为板载控制器"
 
 #. Tag: replaceable
-#: using-d-i.xml:2652
+#: using-d-i.xml:2664
 #, no-c-format
 msgid "disk"
 msgstr "disk"
 
 #. Tag: para
-#: using-d-i.xml:2653
+#: using-d-i.xml:2665
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>arcboot</command> is "
@@ -3858,13 +3878,13 @@ msgstr "硬盘的 SCSI ID，<command>arcboot</command> 安装在其上"
 
 # index.docbook:1643, index.docbook:1712
 #. Tag: replaceable
-#: using-d-i.xml:2661 using-d-i.xml:2730
+#: using-d-i.xml:2673 using-d-i.xml:2742
 #, no-c-format
 msgid "partnr"
 msgstr "partnr"
 
 #. Tag: para
-#: using-d-i.xml:2662
+#: using-d-i.xml:2674
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/arcboot.conf</"
@@ -3872,13 +3892,13 @@ msgid ""
 msgstr "分区号，<filename>/etc/arcboot.conf</filename> 处于该分区"
 
 #. Tag: replaceable
-#: using-d-i.xml:2670
+#: using-d-i.xml:2682
 #, no-c-format
 msgid "config"
 msgstr "config"
 
 #. Tag: para
-#: using-d-i.xml:2671
+#: using-d-i.xml:2683
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/arcboot.conf</"
@@ -3888,13 +3908,13 @@ msgstr ""
 "quote> 。"
 
 #. Tag: title
-#: using-d-i.xml:2692
+#: using-d-i.xml:2704
 #, no-c-format
 msgid "<command>delo</command>-installer"
 msgstr "<command>delo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2693
+#: using-d-i.xml:2705
 #, no-c-format
 msgid ""
 "The boot loader on DECstations is <command>DELO</command>. It has to be "
@@ -3920,13 +3940,13 @@ msgstr ""
 "</screen></informalexample> 。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2712
+#: using-d-i.xml:2724
 #, no-c-format
 msgid "<replaceable>#</replaceable>"
 msgstr "<replaceable>#</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2713
+#: using-d-i.xml:2725
 #, no-c-format
 msgid ""
 "is the TurboChannel device to be booted from, on most DECstations this is "
@@ -3936,20 +3956,20 @@ msgstr ""
 "userinput>"
 
 #. Tag: replaceable
-#: using-d-i.xml:2721
+#: using-d-i.xml:2733
 #, no-c-format
 msgid "<replaceable>id</replaceable>"
 msgstr "<replaceable>id</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2722
+#: using-d-i.xml:2734
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>DELO</command> is installed"
 msgstr "硬盘上的 SCSI ID，<command>DELO</command> 安装在其上"
 
 #. Tag: para
-#: using-d-i.xml:2731
+#: using-d-i.xml:2743
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/delo.conf</filename> "
@@ -3957,13 +3977,13 @@ msgid ""
 msgstr "分区号，<filename>/etc/delo.conf</filename> 处于此分区"
 
 #. Tag: replaceable
-#: using-d-i.xml:2739
+#: using-d-i.xml:2751
 #, no-c-format
 msgid "name"
 msgstr "name"
 
 #. Tag: para
-#: using-d-i.xml:2740
+#: using-d-i.xml:2752
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/delo.conf</"
@@ -3973,7 +3993,7 @@ msgstr ""
 "quote>"
 
 #. Tag: para
-#: using-d-i.xml:2750
+#: using-d-i.xml:2762
 #, no-c-format
 msgid ""
 "In case <filename>/etc/delo.conf</filename> is on the first partition on the "
@@ -3983,19 +4003,19 @@ msgstr ""
 "认的设置，但也可以用"
 
 #. Tag: screen
-#: using-d-i.xml:2756
+#: using-d-i.xml:2768
 #, no-c-format
 msgid "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 msgstr "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 
 #. Tag: title
-#: using-d-i.xml:2766
+#: using-d-i.xml:2778
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "安装 <command>Yaboot</command> 至硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2767
+#: using-d-i.xml:2779
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4013,13 +4033,13 @@ msgstr ""
 "设为启动 &debian;。"
 
 #. Tag: title
-#: using-d-i.xml:2785
+#: using-d-i.xml:2797
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "安装 <command>Quik</command> 至硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2786
+#: using-d-i.xml:2798
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4032,13 +4052,13 @@ msgstr ""
 "以工作在 7200，7300 和 7600 Powermacs，以及一些 Power Computing 克隆。"
 
 #. Tag: title
-#: using-d-i.xml:2802
+#: using-d-i.xml:2814
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2803
+#: using-d-i.xml:2815
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4053,13 +4073,13 @@ msgstr ""
 "Commands</quote>，它位于 IBM 的 developerWorks 网站<command>ZIPL</command>。"
 
 #. Tag: title
-#: using-d-i.xml:2820
+#: using-d-i.xml:2832
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "安装 <command>SILO</command> Boot Loader 到硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2822
+#: using-d-i.xml:2834
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -4086,13 +4106,13 @@ msgstr ""
 "区启动。这对于安装 GNU/Linux 到一个已经存在 SunOS/Solaris 的系统很有用。"
 
 #. Tag: title
-#: using-d-i.xml:2847
+#: using-d-i.xml:2859
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "不使用 boot loader 继续进行"
 
 #. Tag: para
-#: using-d-i.xml:2849
+#: using-d-i.xml:2861
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -4108,7 +4128,7 @@ msgstr ""
 "在机器上，以用于启动 GNU/Linux。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2858
+#: using-d-i.xml:2870
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -4127,13 +4147,13 @@ msgstr ""
 "filename> 到一个独立的分区，还需要 <filename>/boot</filename> 文件系统。"
 
 #. Tag: title
-#: using-d-i.xml:2875
+#: using-d-i.xml:2887
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "完成安装"
 
 #. Tag: para
-#: using-d-i.xml:2876
+#: using-d-i.xml:2888
 #, no-c-format
 msgid ""
 "This is the last step in the Debian installation process during which the "
@@ -4144,13 +4164,13 @@ msgstr ""
 "i; 之后的清理。"
 
 #. Tag: title
-#: using-d-i.xml:2889
+#: using-d-i.xml:2901
 #, no-c-format
 msgid "Setting the System Clock"
 msgstr "设置系统时钟"
 
 #. Tag: para
-#: using-d-i.xml:2891
+#: using-d-i.xml:2903
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -4162,7 +4182,7 @@ msgstr ""
 "装程序依据是否有其他系统已经安装这类事情，来决定时钟要不要设为 UTC。"
 
 #. Tag: para
-#: using-d-i.xml:2898
+#: using-d-i.xml:2910
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -4178,7 +4198,7 @@ msgstr ""
 "为本地时间。如果您需要多重引导，请选择本地时间而不是 GMT。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2909
+#: using-d-i.xml:2921
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -4189,13 +4209,13 @@ msgstr ""
 "决于刚才的选择。"
 
 #. Tag: title
-#: using-d-i.xml:2924
+#: using-d-i.xml:2936
 #, no-c-format
 msgid "Reboot the System"
 msgstr "重新启动系统"
 
 #. Tag: para
-#: using-d-i.xml:2926
+#: using-d-i.xml:2938
 #, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -4206,7 +4226,7 @@ msgstr ""
 "Debian 系统。"
 
 #. Tag: para
-#: using-d-i.xml:2932
+#: using-d-i.xml:2944
 #, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -4218,13 +4238,13 @@ msgstr ""
 "上的 IPL &debian;，它在安装步骤第一步里被选做根文件系统。"
 
 #. Tag: title
-#: using-d-i.xml:2945
+#: using-d-i.xml:2957
 #, no-c-format
 msgid "Miscellaneous"
 msgstr "杂项"
 
 #. Tag: para
-#: using-d-i.xml:2946
+#: using-d-i.xml:2958
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -4235,13 +4255,13 @@ msgstr ""
 "题。"
 
 #. Tag: title
-#: using-d-i.xml:2959
+#: using-d-i.xml:2971
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "保存安装记录"
 
 #. Tag: para
-#: using-d-i.xml:2961
+#: using-d-i.xml:2973
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -4252,7 +4272,7 @@ msgstr ""
 "<filename>/var/log/installer/</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2968
+#: using-d-i.xml:2980
 #, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -4266,13 +4286,13 @@ msgstr ""
 "其它系统上研究记录，或者用于报告的附件。"
 
 #. Tag: title
-#: using-d-i.xml:2988
+#: using-d-i.xml:3000
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "使用 Shell 查看记录"
 
 #. Tag: para
-#: using-d-i.xml:2990
+#: using-d-i.xml:3002
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -4296,13 +4316,13 @@ msgstr ""
 "安装程序。"
 
 #. Tag: para
-#: using-d-i.xml:3008
+#: using-d-i.xml:3020
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3012
+#: using-d-i.xml:3024
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -4317,7 +4337,7 @@ msgstr ""
 "到安装程序。"
 
 #. Tag: para
-#: using-d-i.xml:3020
+#: using-d-i.xml:3032
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4333,7 +4353,7 @@ msgstr ""
 "Bourne shell 的克隆，有一些如自动完成与历史纪录这样的好特性。"
 
 #. Tag: para
-#: using-d-i.xml:3029
+#: using-d-i.xml:3041
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -4344,7 +4364,7 @@ msgstr ""
 "以在 <filename>/var/log</filename> 目录找到。"
 
 #. Tag: para
-#: using-d-i.xml:3036
+#: using-d-i.xml:3048
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -4355,7 +4375,7 @@ msgstr ""
 "题时进行调试。"
 
 #. Tag: para
-#: using-d-i.xml:3042
+#: using-d-i.xml:3054
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -4367,13 +4387,13 @@ msgstr ""
 "该让安装程序激活交换分区，而不是在 shell 里面自己动手。"
 
 #. Tag: title
-#: using-d-i.xml:3057
+#: using-d-i.xml:3069
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "通过网络安装"
 
 #. Tag: para
-#: using-d-i.xml:3059
+#: using-d-i.xml:3071
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4388,7 +4408,7 @@ msgstr ""
 "先建立网络。(您可以使用 <xref linkend=\"automatic-install\"/> 做这部分工作。)"
 
 #. Tag: para
-#: using-d-i.xml:3069
+#: using-d-i.xml:3081
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4408,7 +4428,7 @@ msgstr ""
 "SSH</guimenuitem>。"
 
 #. Tag: para
-#: using-d-i.xml:3082
+#: using-d-i.xml:3094
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4416,7 +4436,7 @@ msgid ""
 msgstr "在 &arch-title; 上安装，建立网络之后这是默认的方法。"
 
 #. Tag: para
-#: using-d-i.xml:3087
+#: using-d-i.xml:3099
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4436,7 +4456,7 @@ msgstr ""
 "quote>。"
 
 #. Tag: para
-#: using-d-i.xml:3099
+#: using-d-i.xml:3111
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4447,7 +4467,7 @@ msgstr ""
 "他的组件。"
 
 #. Tag: para
-#: using-d-i.xml:3105
+#: using-d-i.xml:3117
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4475,7 +4495,7 @@ msgstr ""
 "确认是否正确。"
 
 #. Tag: para
-#: using-d-i.xml:3122
+#: using-d-i.xml:3134
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -4496,7 +4516,7 @@ msgstr ""
 "接在安装过程中的哪一点断开，您在连接之后可能继续，也可能无法继续安装过程。"
 
 #. Tag: para
-#: using-d-i.xml:3135
+#: using-d-i.xml:3147
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -4516,7 +4536,7 @@ msgstr ""
 "需要的时候采用。"
 
 #. Tag: para
-#: using-d-i.xml:3148
+#: using-d-i.xml:3160
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4538,7 +4558,7 @@ msgstr ""
 "footnote>，再重新来过。"
 
 #. Tag: para
-#: using-d-i.xml:3164
+#: using-d-i.xml:3176
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -4555,7 +4575,7 @@ msgstr ""
 "的系统。在安装菜单只能打开一个 SSH 会话，但 shell 可以打开多个。"
 
 #. Tag: para
-#: using-d-i.xml:3174
+#: using-d-i.xml:3186
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -4568,7 +4588,7 @@ msgstr ""
 "配置的数据库。结果可能导致安装失败或者安装完成的系统出现问题。"
 
 #. Tag: para
-#: using-d-i.xml:3182
+#: using-d-i.xml:3194
 #, no-c-format
 msgid ""
 "Also, if you are running the SSH session from an X terminal, you should not "