[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 128 insertions, 114 deletions

diff --git a/po/zh_TW/install-methods.po b/po/zh_TW/install-methods.po
index 10b054b8f..9fb2d0b30 100644
--- a/po/zh_TW/install-methods.po
+++ b/po/zh_TW/install-methods.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-12-31 03:15+0000\n"
+"POT-Creation-Date: 2007-01-01 11:02+0000\n"
 "PO-Revision-Date: 2005-07-18 12:10+0800\n"
 "Last-Translator: Jhang, Jia-Wei<dreamcryer@gmail.com>\n"
 "Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
@@ -880,7 +880,7 @@ msgstr ""
 
 # index.docbook:645, index.docbook:739
 #. Tag: title
-#: install-methods.xml:662 install-methods.xml:754
+#: install-methods.xml:662 install-methods.xml:751
 #, no-c-format
 msgid "USB stick partitioning on &arch-title;"
 msgstr "&arch-title; 上的 USB 隨身碟分割區"
@@ -980,27 +980,22 @@ msgstr ""
 
 #. Tag: para
 #: install-methods.xml:736
-#, fuzzy, no-c-format
+#, no-c-format
 msgid ""
 "The <filename>syslinux.cfg</filename> configuration file should contain the "
-"following two lines: <informalexample><screen>\n"
-"default vmlinuz\n"
-"append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
-"</screen></informalexample> Please note that the <userinput>ramdisk_size</"
-"userinput> parameter may need to be increased, depending on the image you "
-"are booting."
+"following two lines:"
 msgstr ""
-"<filename>syslinux.cfg</filename> 設定檔案應該含有下列兩行： "
-"<informalexample><screen>\n"
+
+#. Tag: screen
+#: install-methods.xml:741
+#, no-c-format
+msgid ""
 "default vmlinuz\n"
-"append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
-"</screen></informalexample> 請注意，根據開機的映像大小，在必要的時候，您可能"
-"需要增大 <userinput>ramdisk_size</userinput> 參數的數值。<phrase condition="
-"\"sarge\">如果開機失敗，您可以嘗試添加 <userinput>devfs=mount,dall</"
-"userinput> 到 <quote>append</quote> 那一行。</phrase>"
+"append initrd=initrd.gz"
+msgstr ""
 
 #. Tag: para
-#: install-methods.xml:755
+#: install-methods.xml:752
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -1026,7 +1021,7 @@ msgstr ""
 "套件中。"
 
 #. Tag: para
-#: install-methods.xml:771
+#: install-methods.xml:768
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -1041,7 +1036,7 @@ msgstr ""
 "改變 boot-loader 的設定檔。"
 
 #. Tag: para
-#: install-methods.xml:780
+#: install-methods.xml:777
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -1075,7 +1070,7 @@ msgstr ""
 "其他部分就可以用普通的 Unix 工具來處理了。"
 
 #. Tag: para
-#: install-methods.xml:796
+#: install-methods.xml:793
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/sda2 /mnt</userinput>) and copy "
@@ -1085,37 +1080,37 @@ msgstr ""
 "檔案從 Debain 檔案庫拷貝到儲存上："
 
 #. Tag: para
-#: install-methods.xml:802
+#: install-methods.xml:799
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (核心二進位文件)"
 
 #. Tag: para
-#: install-methods.xml:807
+#: install-methods.xml:804
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (初始化記憶體映像檔)"
 
 #. Tag: para
-#: install-methods.xml:812
+#: install-methods.xml:809
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (yaboot 設定檔案)"
 
 #. Tag: para
-#: install-methods.xml:817
+#: install-methods.xml:814
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (可選的啟動資訊)"
 
 #. Tag: para
-#: install-methods.xml:822
+#: install-methods.xml:819
 #, no-c-format
 msgid "Optional kernel modules"
 msgstr "可選的核心模組"
 
 #. Tag: para
-#: install-methods.xml:829
+#: install-methods.xml:826
 #, fuzzy, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -1152,13 +1147,13 @@ msgstr ""
 "像的大小。"
 
 #. Tag: title
-#: install-methods.xml:845
+#: install-methods.xml:842
 #, no-c-format
 msgid "Adding an ISO image"
 msgstr "添加 ISO 映像"
 
 #. Tag: para
-#: install-methods.xml:846
+#: install-methods.xml:843
 #, fuzzy, no-c-format
 msgid ""
 "The installer will look for a Debian ISO image on the stick as its source "
@@ -1172,7 +1167,7 @@ msgstr ""
 "<filename>.iso</filename>。"
 
 #. Tag: para
-#: install-methods.xml:854
+#: install-methods.xml:851
 #, no-c-format
 msgid ""
 "If you want to install over the network, without using an ISO image, you "
@@ -1187,7 +1182,7 @@ msgstr ""
 "gz</filename> 並不包含網路支援。"
 
 #. Tag: para
-#: install-methods.xml:863
+#: install-methods.xml:860
 #, no-c-format
 msgid ""
 "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
@@ -1197,13 +1192,13 @@ msgstr ""
 "護。"
 
 #. Tag: title
-#: install-methods.xml:873
+#: install-methods.xml:870
 #, no-c-format
 msgid "Booting the USB stick"
 msgstr "以 USB 隨身碟開機"
 
 #. Tag: para
-#: install-methods.xml:874
+#: install-methods.xml:871
 #, no-c-format
 msgid ""
 "If your system refuses to boot from the memory stick, the stick may contain "
@@ -1215,19 +1210,19 @@ msgstr ""
 "自 <classname>mbr</classname> 軟體套件："
 
 #. Tag: screen
-#: install-methods.xml:881
+#: install-methods.xml:878
 #, no-c-format
 msgid "# install-mbr /dev/<replaceable>sda</replaceable>"
 msgstr "# install-mbr /dev/<replaceable>sda</replaceable>"
 
 #. Tag: title
-#: install-methods.xml:892
+#: install-methods.xml:889
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "準備從硬碟開機的檔案"
 
 #. Tag: para
-#: install-methods.xml:893
+#: install-methods.xml:890
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -1238,7 +1233,7 @@ msgstr ""
 "或者直接使用 BIOS 提供的 boot-loader 直接啟動。"
 
 #. Tag: para
-#: install-methods.xml:899
+#: install-methods.xml:896
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1251,13 +1246,13 @@ msgstr ""
 "不清。"
 
 #. Tag: para
-#: install-methods.xml:906
+#: install-methods.xml:903
 #, no-c-format
 msgid "The installer cannot boot from files on an NTFS file system."
 msgstr "安裝程式無法在 NTFS 檔案系統上開機。"
 
 #. Tag: para
-#: install-methods.xml:910
+#: install-methods.xml:907
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1277,7 +1272,7 @@ msgstr ""
 "和 Linux 之間交換檔案，特別是那些您下載的安裝檔案。"
 
 #. Tag: para
-#: install-methods.xml:921
+#: install-methods.xml:918
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1288,7 +1283,7 @@ msgstr ""
 "安裝程式開機時將使用不同的安裝檔案。"
 
 #. Tag: title
-#: install-methods.xml:930
+#: install-methods.xml:927
 #, no-c-format
 msgid ""
 "Hard disk installer booting using <command>LILO</command> or <command>GRUB</"
@@ -1297,7 +1292,7 @@ msgstr ""
 "使用 <command>LILO</command> 或 <command>GRUB</command>啟動硬碟安裝程式"
 
 #. Tag: para
-#: install-methods.xml:932
+#: install-methods.xml:929
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1307,7 +1302,7 @@ msgstr ""
 "或者甚至替換現有的 linux 安裝。"
 
 #. Tag: para
-#: install-methods.xml:938
+#: install-methods.xml:935
 #, no-c-format
 msgid ""
 "At boot time, both bootloaders support loading in memory not only the "
@@ -1318,7 +1313,7 @@ msgstr ""
 "擬磁碟可以被用做核心的根檔案系統。"
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:941
 #, no-c-format
 msgid ""
 "Copy the following files from the Debian archives to a convenient location "
@@ -1328,19 +1323,19 @@ msgstr ""
 "newinstall/</filename>。"
 
 #. Tag: para
-#: install-methods.xml:951
+#: install-methods.xml:948
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename>(核心二進位文件)"
 
 #. Tag: para
-#: install-methods.xml:956
+#: install-methods.xml:953
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (記憶體虛擬磁碟映像)"
 
 #. Tag: para
-#: install-methods.xml:963
+#: install-methods.xml:960
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1348,13 +1343,13 @@ msgid ""
 msgstr "最後，要設定 boot-loader，請進入 <xref linkend=\"boot-initrd\"/>。"
 
 #. Tag: title
-#: install-methods.xml:973
+#: install-methods.xml:970
 #, no-c-format
 msgid "Hard Disk Installer Booting for OldWorld Macs"
 msgstr "OldWorld Macs 上的硬碟開機安裝程式"
 
 #. Tag: para
-#: install-methods.xml:974
+#: install-methods.xml:971
 #, no-c-format
 msgid ""
 "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</"
@@ -1376,7 +1371,7 @@ msgstr ""
 "是必須的。"
 
 #. Tag: para
-#: install-methods.xml:987
+#: install-methods.xml:984
 #, no-c-format
 msgid ""
 "Download and unstuff the <application>BootX</application> distribution, "
@@ -1402,13 +1397,13 @@ msgstr ""
 "目錄中，然後把 <filename>Linux Kernels</filename> 目錄放到活動的系統目錄中。"
 
 #. Tag: title
-#: install-methods.xml:1007
+#: install-methods.xml:1004
 #, no-c-format
 msgid "Hard Disk Installer Booting for NewWorld Macs"
 msgstr "NewWorld Macs 下啟動硬碟安裝程式"
 
 #. Tag: para
-#: install-methods.xml:1008
+#: install-methods.xml:1005
 #, no-c-format
 msgid ""
 "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as "
@@ -1426,7 +1421,7 @@ msgstr ""
 "援，也一定不能用在 NewWorld PowerMacs 上。"
 
 #. Tag: para
-#: install-methods.xml:1019
+#: install-methods.xml:1016
 #, no-c-format
 msgid ""
 "<emphasis>Copy</emphasis> (not move) the following four files which you "
@@ -1439,31 +1434,31 @@ msgstr ""
 "到硬碟圖示的方法來完成)。"
 
 #. Tag: filename
-#: install-methods.xml:1029
+#: install-methods.xml:1026
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1034
+#: install-methods.xml:1031
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1039
+#: install-methods.xml:1036
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1044
+#: install-methods.xml:1041
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: para
-#: install-methods.xml:1049
+#: install-methods.xml:1046
 #, fuzzy, no-c-format
 msgid ""
 "Make a note of the partition number of the MacOS partition where you place "
@@ -1477,19 +1472,19 @@ msgstr ""
 "個分割區號碼用於在 Open Firmware 提示符號下面輸入指令。"
 
 #. Tag: para
-#: install-methods.xml:1057
+#: install-methods.xml:1054
 #, no-c-format
 msgid "To boot the installer, proceed to <xref linkend=\"boot-newworld\"/>."
 msgstr "要啟動安裝程式，請進入 <xref linkend=\"boot-newworld\"/>。"
 
 #. Tag: title
-#: install-methods.xml:1070
+#: install-methods.xml:1067
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "準備以 TFTP 網路開機用的檔案"
 
 #. Tag: para
-#: install-methods.xml:1071
+#: install-methods.xml:1068
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1503,7 +1498,7 @@ msgstr ""
 "上面的某個特殊地方，並且設定您的機器從該機器進行開機。"
 
 #. Tag: para
-#: install-methods.xml:1079
+#: install-methods.xml:1076
 #, fuzzy, no-c-format
 msgid ""
 "You need to setup a TFTP server, and for many machines a DHCP server<phrase "
@@ -1515,7 +1510,7 @@ msgstr ""
 "condition=\"supports-dhcp\">，又或 DHCP 伺服器</phrase>。"
 
 #. Tag: para
-#: install-methods.xml:1086
+#: install-methods.xml:1083
 #, fuzzy, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1538,7 +1533,7 @@ msgstr ""
 "BOOTP 延伸。有一些系統只能透過 DHCP 來配置。</phrase>"
 
 #. Tag: para
-#: install-methods.xml:1103
+#: install-methods.xml:1100
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1549,7 +1544,7 @@ msgstr ""
 "替 BOOTP 比較好。有些最新的機器不能從 BOOTP 開機。"
 
 #. Tag: para
-#: install-methods.xml:1109
+#: install-methods.xml:1106
 #, no-c-format
 msgid ""
 "Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM "
@@ -1570,7 +1565,7 @@ msgstr ""
 "para> </footnote>。您也可以直接在 SRM 控制台中直接輸入網路介面的 IP 設定。"
 
 #. Tag: para
-#: install-methods.xml:1126
+#: install-methods.xml:1123
 #, fuzzy, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1580,7 +1575,7 @@ msgstr ""
 "網站上能夠找到 RBOOTD 軟體套件。"
 
 #. Tag: para
-#: install-methods.xml:1131
+#: install-methods.xml:1128
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1594,7 +1589,7 @@ msgstr ""
 "上面的一些操作例子。"
 
 #. Tag: para
-#: install-methods.xml:1139
+#: install-methods.xml:1136
 #, no-c-format
 msgid ""
 "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, you "
@@ -1608,13 +1603,13 @@ msgstr ""
 "求，我們建議使用 <classname>tftpd-hpa</classname>。"
 
 #. Tag: title
-#: install-methods.xml:1157
+#: install-methods.xml:1154
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "設置 RARP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:1158
+#: install-methods.xml:1155
 #, fuzzy, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1632,7 +1627,7 @@ msgstr ""
 "<userinput>/sbin/ifconfig eth0</userinput> 指令。"
 
 #. Tag: para
-#: install-methods.xml:1170
+#: install-methods.xml:1167
 #, fuzzy, no-c-format
 msgid ""
 "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, "
@@ -1652,13 +1647,13 @@ msgstr ""
 "使用 <userinput>/usr/sbin/rarpd -a</userinput> 指令。"
 
 #. Tag: title
-#: install-methods.xml:1192
+#: install-methods.xml:1189
 #, fuzzy, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "設置 BOOTP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:1193
+#: install-methods.xml:1190
 #, fuzzy, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1673,7 +1668,7 @@ msgstr ""
 "體套件中。"
 
 #. Tag: para
-#: install-methods.xml:1201
+#: install-methods.xml:1198
 #, fuzzy, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1729,7 +1724,7 @@ msgstr ""
 "的 MAC 位址。 </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1234
+#: install-methods.xml:1231
 #, fuzzy, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1749,13 +1744,13 @@ msgstr ""
 "令是：<userinput>/etc/init.d/dhcpd restart</userinput>。"
 
 #. Tag: title
-#: install-methods.xml:1255
+#: install-methods.xml:1252
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "設置 DHCP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:1256
+#: install-methods.xml:1253
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian;, "
@@ -1765,7 +1760,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:1263
+#: install-methods.xml:1260
 #, fuzzy, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1815,7 +1810,7 @@ msgstr ""
 "檔。"
 
 #. Tag: para
-#: install-methods.xml:1265
+#: install-methods.xml:1262
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1831,7 +1826,7 @@ msgstr ""
 "TFTP 取得的檔案名稱。"
 
 #. Tag: para
-#: install-methods.xml:1275
+#: install-methods.xml:1272
 #, fuzzy, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1841,13 +1836,13 @@ msgstr ""
 "<userinput>/etc/init.d/dhcpd restart</userinput>。"
 
 #. Tag: title
-#: install-methods.xml:1283
+#: install-methods.xml:1280
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "在 DHCP 設定中打開 PXE 開機功能"
 
 #. Tag: para
-#: install-methods.xml:1284
+#: install-methods.xml:1281
 #, fuzzy, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1919,13 +1914,13 @@ msgstr ""
 "面的<xref linkend=\"tftp-images\"/> )。"
 
 #. Tag: title
-#: install-methods.xml:1300
+#: install-methods.xml:1297
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "啟用 TFTP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:1301
+#: install-methods.xml:1298
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1943,7 +1938,7 @@ msgstr ""
 "</screen></informalexample> Debian 套件通常在安裝後會自動把這條設定好。"
 
 #. Tag: para
-#: install-methods.xml:1313
+#: install-methods.xml:1310
 #, no-c-format
 msgid ""
 "Historically TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1955,7 +1950,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1323
+#: install-methods.xml:1320
 #, fuzzy, no-c-format
 msgid ""
 "Look in <filename>/etc/inetd.conf</filename> and remember the directory "
@@ -1980,7 +1975,7 @@ msgstr ""
 "<replaceable>inetd-pid</replaceable></userinput>。"
 
 #. Tag: para
-#: install-methods.xml:1341
+#: install-methods.xml:1338
 #, fuzzy, no-c-format
 msgid ""
 "If you intend to install Debian on an SGI machine and your TFTP server is a "
@@ -2008,13 +2003,13 @@ msgstr ""
 "這個錯誤。"
 
 #. Tag: title
-#: install-methods.xml:1363
+#: install-methods.xml:1360
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "將 TFTP 映像放到適當的位置"
 
 #. Tag: para
-#: install-methods.xml:1364
+#: install-methods.xml:1361
 #, fuzzy, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -2030,7 +2025,7 @@ msgstr ""
 "個強制的標準。"
 
 #. Tag: para
-#: install-methods.xml:1373
+#: install-methods.xml:1370
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -2047,7 +2042,7 @@ msgstr ""
 "TFTP 目錄。"
 
 #. Tag: para
-#: install-methods.xml:1382
+#: install-methods.xml:1379
 #, fuzzy, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2062,7 +2057,7 @@ msgstr ""
 "機所需的檔案名傳遞至 <command>tftpd</command>。"
 
 #. Tag: para
-#: install-methods.xml:1390
+#: install-methods.xml:1387
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2077,13 +2072,13 @@ msgstr ""
 "efi</filename> 以開機所需的檔案名傳遞至<command>tftpd</command>。"
 
 #. Tag: title
-#: install-methods.xml:1402
+#: install-methods.xml:1399
 #, no-c-format
 msgid "DECstation TFTP Images"
 msgstr "DECstation TFTP 映像檔"
 
 #. Tag: para
-#: install-methods.xml:1403
+#: install-methods.xml:1400
 #, fuzzy, no-c-format
 msgid ""
 "For DECstations, there are tftpimage files for each subarchitecture, which "
@@ -2099,7 +2094,7 @@ msgstr ""
 "的 tftpimage 檔案拷貝至 <userinput>/tftpboot/tftpboot.img</userinput>。"
 
 #. Tag: para
-#: install-methods.xml:1413
+#: install-methods.xml:1410
 #, no-c-format
 msgid ""
 "The DECstation firmware boots by TFTP with the command <userinput>boot "
@@ -2116,13 +2111,13 @@ msgstr ""
 "數，他們可以按照下列語法加入："
 
 #. Tag: userinput
-#: install-methods.xml:1425
+#: install-methods.xml:1422
 #, no-c-format
 msgid "boot #/tftp/filename param1=value1 param2=value2 ..."
 msgstr "boot #/tftp/filename param1=value1 param2=value2 ..."
 
 #. Tag: para
-#: install-methods.xml:1427
+#: install-methods.xml:1424
 #, no-c-format
 msgid ""
 "Several DECstation firmware revisions show a problem with regard to net "
@@ -2156,13 +2151,13 @@ msgstr ""
 "www.netbsd.org/Ports/pmax/board-list.html#proms\"></ulink>。"
 
 #. Tag: title
-#: install-methods.xml:1465
+#: install-methods.xml:1462
 #, no-c-format
 msgid "Alpha TFTP Booting"
 msgstr "Alpha TFTP 開機"
 
 #. Tag: para
-#: install-methods.xml:1466
+#: install-methods.xml:1463
 #, no-c-format
 msgid ""
 "On Alpha, you must specify the filename (as a relative path to the boot "
@@ -2183,13 +2178,13 @@ msgstr ""
 "檔案名稱。"
 
 #. Tag: title
-#: install-methods.xml:1481
+#: install-methods.xml:1478
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "SPARC TFTP 開機"
 
 #. Tag: para
-#: install-methods.xml:1482
+#: install-methods.xml:1479
 #, fuzzy, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -2217,7 +2212,7 @@ msgstr ""
 "該將所有的字母改成大寫並在必要時加上子架構名。"
 
 #. Tag: para
-#: install-methods.xml:1498
+#: install-methods.xml:1495
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -2227,7 +2222,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1505
+#: install-methods.xml:1502
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -2240,13 +2235,13 @@ msgstr ""
 "仍然必須被放置在 TFTP 伺服器要查找的目錄中。"
 
 #. Tag: title
-#: install-methods.xml:1516
+#: install-methods.xml:1513
 #, no-c-format
 msgid "BVM/Motorola TFTP Booting"
 msgstr "BVM/Motorola TFTP 開機"
 
 #. Tag: para
-#: install-methods.xml:1517
+#: install-methods.xml:1514
 #, no-c-format
 msgid ""
 "For BVM and Motorola VMEbus systems copy the files &bvme6000-tftp-files; to "
@@ -2256,7 +2251,7 @@ msgstr ""
 "到 <filename>/tftpboot/</filename>。"
 
 #. Tag: para
-#: install-methods.xml:1522
+#: install-methods.xml:1519
 #, no-c-format
 msgid ""
 "Next, configure your boot ROMs or BOOTP server to initially load the "
@@ -2271,13 +2266,13 @@ msgstr ""
 "子架構的系統特殊配置資訊。"
 
 #. Tag: title
-#: install-methods.xml:1534
+#: install-methods.xml:1531
 #, fuzzy, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "SGI Indys TFTP 開機"
 
 #. Tag: para
-#: install-methods.xml:1535
+#: install-methods.xml:1532
 #, fuzzy, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -2291,13 +2286,13 @@ msgstr ""
 "<userinput>filename=</userinput>選項。"
 
 #. Tag: title
-#: install-methods.xml:1547
+#: install-methods.xml:1544
 #, fuzzy, no-c-format
 msgid "Broadcom BCM91250A and BCM91480B TFTP Booting"
 msgstr "Broadcom BCM91250A TFTP 開機"
 
 #. Tag: para
-#: install-methods.xml:1548
+#: install-methods.xml:1545
 #, fuzzy, no-c-format
 msgid ""
 "You don't have to configure DHCP in a special way because you'll pass the "
@@ -2307,13 +2302,13 @@ msgstr ""
 "去。"
 
 #. Tag: title
-#: install-methods.xml:1653
+#: install-methods.xml:1650
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "自動化安裝"
 
 #. Tag: para
-#: install-methods.xml:1654
+#: install-methods.xml:1651
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2328,13 +2323,13 @@ msgstr ""
 "<classname>autoinstall</classname>，以及 Debian 安裝程式本身。"
 
 #. Tag: title
-#: install-methods.xml:1667
+#: install-methods.xml:1664
 #, no-c-format
 msgid "Automatic Installation Using the Debian Installer"
 msgstr "使用 Debian 安裝程式進行自動安裝"
 
 #. Tag: para
-#: install-methods.xml:1668
+#: install-methods.xml:1665
 #, fuzzy, no-c-format
 msgid ""
 "The Debian Installer supports automating installs via preconfiguration "
@@ -2346,7 +2341,7 @@ msgstr ""
 "可從移動媒介上載入，並且被用來在安裝過程中自動回答問題。"
 
 #. Tag: para
-#: install-methods.xml:1675
+#: install-methods.xml:1672
 #, fuzzy, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2355,6 +2350,25 @@ msgstr ""
 "預先設定檔是按照 debconf-set-selections 指令的格式寫成的。這裡有一個具有詳盡"
 "註解並能正常工作的預先設定檔例子：<xref linkend=\"example-preseed\"/>。"
 
+#, fuzzy
+#~ msgid ""
+#~ "The <filename>syslinux.cfg</filename> configuration file should contain "
+#~ "the following two lines: <informalexample><screen>\n"
+#~ "default vmlinuz\n"
+#~ "append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
+#~ "</screen></informalexample> Please note that the <userinput>ramdisk_size</"
+#~ "userinput> parameter may need to be increased, depending on the image you "
+#~ "are booting."
+#~ msgstr ""
+#~ "<filename>syslinux.cfg</filename> 設定檔案應該含有下列兩行： "
+#~ "<informalexample><screen>\n"
+#~ "default vmlinuz\n"
+#~ "append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
+#~ "</screen></informalexample> 請注意，根據開機的映像大小，在必要的時候，您可"
+#~ "能需要增大 <userinput>ramdisk_size</userinput> 參數的數值。<phrase "
+#~ "condition=\"sarge\">如果開機失敗，您可以嘗試添加 <userinput>devfs=mount,"
+#~ "dall</userinput> 到 <quote>append</quote> 那一行。</phrase>"
+
 #~ msgid ""
 #~ "On a RARP server system using a Linux 2.2.x kernel, you need to populate "
 #~ "the kernel's RARP table. To do this, run the following commands: "