Refresh po|pot files; sync translations where possible

1 files changed, 348 insertions, 523 deletions

diff --git a/po/zh_TW/install-methods.po b/po/zh_TW/install-methods.po
index da865209a..727284e1a 100644
--- a/po/zh_TW/install-methods.po
+++ b/po/zh_TW/install-methods.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2022-05-19 22:02+0000\n"
+"POT-Creation-Date: 2023-04-02 11:02+0000\n"
 "PO-Revision-Date: 2005-07-18 12:10+0800\n"
 "Last-Translator: Jhang, Jia-Wei<dreamcryer@gmail.com>\n"
 "Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
@@ -380,16 +380,6 @@ msgstr ""
 #: install-methods.xml:276
 #, no-c-format
 msgid ""
-"Alternatively, for very small USB sticks, only a few megabytes in size, you "
-"can download the &netboot-mini-iso; image from the <filename>netboot</"
-"filename> directory (at the location mentioned in <xref linkend=\"where-files"
-"\"/>)."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:283
-#, no-c-format
-msgid ""
 "The installation image you choose should be written directly to the USB "
 "stick, overwriting its current contents. For example, when using an existing "
 "GNU/Linux system, the image file can be written to a USB stick as follows, "
@@ -398,430 +388,37 @@ msgid ""
 "<prompt>#</prompt> <userinput>cp <replaceable>debian.iso</replaceable> /dev/"
 "<replaceable>sdX</replaceable></userinput>\n"
 "<prompt>#</prompt> <userinput>sync</userinput>\n"
-"</screen></informalexample> Information about how to do this on other "
-"operating systems can be found in the <ulink url=\"&url-debian-cd-faq-write-"
-"usb;\">Debian CD FAQ</ulink>."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:295
-#, no-c-format
-msgid ""
-"The image must be written to the whole-disk device and not a partition, e."
-"g. /dev/sdb and not /dev/sdb1. Do not use tools like <command>unetbootin</"
-"command> which alter the image."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:301
-#, no-c-format
-msgid ""
-"Simply writing the installation image to USB like this should work fine for "
-"most users. The other options below are more complex, mainly for people with "
-"specialised needs."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:309
-#, no-c-format
-msgid ""
-"The hybrid image on the stick does not occupy all the storage space, so it "
-"may be worth considering using the free space to hold firmware files or "
-"packages or any other files of your choice. This could be useful if you have "
-"only one stick or just want to keep everything you need on one device."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:317
-#, no-c-format
-msgid ""
-"To do so, use cfdisk or any other partitioning tool to create an additional "
-"partition on the stick. Then create a (FAT) filesystem on the partition, "
-"mount it and copy or unpack the firmware onto it, for example with: "
-"<informalexample><screen>\n"
-"# mkdosfs -n FIRMWARE /dev/sdX3\n"
-"# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
-"# cd /mnt\n"
-"# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
-"# cd /\n"
-"# umount /mnt\n"
-"</screen></informalexample> Take care that you use the correct device name "
-"for your USB stick. The <command>mkdosfs</command> command is contained in "
-"the <classname>dosfstools</classname> &debian; package."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:329
-#, no-c-format
-msgid ""
-"If you have chosen the <filename>mini.iso</filename> to be written to the "
-"USB stick, the second partition doesn't have to be created, as - very nicely "
-"- it will already be present. Unplugging and replugging the USB stick should "
-"make the two partitions visible."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:343
-#, fuzzy, no-c-format
-#| msgid "Booting the USB stick"
-msgid "Manually copying files to the USB stick"
-msgstr "以 USB 隨身碟開機"
-
-#. Tag: para
-#: install-methods.xml:344
-#, no-c-format
-msgid ""
-"Prior to isohybrid technology being used for &debian; installation images, "
-"the methods documented in the chapters below were used to prepare media for "
-"booting from USB devices. These have been superseded by the technique in "
-"<xref linkend=\"usb-copy-isohybrid\"/>, but have been left here for "
-"educational and historical purposes and in case they are useful to some user."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:353
-#, fuzzy, no-c-format
-msgid ""
-"An alternative to the method described in <xref linkend=\"usb-copy-isohybrid"
-"\"/> is to manually copy the installer files, and also an installation image "
-"to the stick. Note that the USB stick should be at least 1 GB in size "
-"(smaller setups are possible using the files from netboot, following <xref "
-"linkend=\"usb-copy-flexible\"/>)."
-msgstr ""
-"注意，USB 隨身碟應該至少有 128MB 的容量 (在更小的大小安裝也是可能的，請參閱 "
-"<xref linkend=\"usb-copy-flexible\"/>)。"
-
-#. Tag: para
-#: install-methods.xml:362
-#, fuzzy, no-c-format
-msgid ""
-"There is an all-in-one file &hdmedia-boot-img; which contains all the "
-"installer files (including the kernel)<phrase arch=\"x86\"> as well as "
-"<classname>syslinux</classname> and its configuration file</phrase>."
-msgstr ""
-"這裡有一個單一檔案 &hdmedia-boot-img;，其中包含了所有的安裝程式文件 (包括核"
-"心)，以及 <command>syslinux</command> 和它的設定檔案。您只需要把它直接解壓縮"
-"到您的 USB 隨身碟內即可：<informalexample><screen>\n"
-"# zcat boot.img.gz &gt; /dev/<replaceable>sda</replaceable>\n"
-"</screen></informalexample> 當然，這會刪除設備上現存的所有內容，因此請仔細檢"
-"查您使用的是正確的 USB 隨身碟設備名稱。"
-
-#. Tag: para
-#: install-methods.xml:369
-#, no-c-format
-msgid ""
-"Note that, although convenient, this method does have one major "
-"disadvantage: the logical size of the device will be limited to 1 GB, even "
-"if the capacity of the USB stick is larger. You will need to repartition the "
-"USB stick and create new file systems to get its full capacity back if you "
-"ever want to use it for some different purpose."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:377
-#, no-c-format
-msgid "Simply extract this image directly to your USB stick:"
-msgstr ""
-
-#. Tag: screen
-#: install-methods.xml:381
-#, no-c-format
-msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
-msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
-
-#. Tag: para
-#: install-methods.xml:397
-#, fuzzy, no-c-format
-msgid ""
-"After that, mount the USB memory stick <phrase arch="
-"\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
-"userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
-"<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now "
-"have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc"
-"\">an HFS filesystem</phrase> on it, and copy a &debian; ISO image (netinst "
-"or full CD; see <xref linkend=\"official-cdrom\"/>) to it. Unmount the stick "
-"(<userinput>umount /mnt</userinput>) and you are done."
-msgstr ""
-"然後，掛載 USB 隨身碟 (<userinput>mount <replaceable arch=\"i386\">/dev/sda</"
-"replaceable> <replaceable arch=\"powerpc\">/dev/sda2</replaceable> /mnt</"
-"userinput>)，它上面應該已經具有<phrase arch=\"i386\">一個 FAT 檔案系統</"
-"phrase> <phrase arch=\"powerpc\">一個 HFS 檔案系統</phrase>，您再將一個 "
-"&debian; netinst (網路安裝) 或 businesscard (名片型安裝) ISO 映像檔拷貝到隨身"
-"碟上。請注意檔案名稱必須以 <filename>.iso</filename> 結尾。卸載隨身碟 "
-"(<userinput>umount /mnt</userinput>) 後結束。"
-
-#. Tag: title
-#: install-methods.xml:415
-#, fuzzy, no-c-format
-#| msgid "Copying the files &mdash; the flexible way"
-msgid "Manually copying files to the USB stick &mdash; the flexible way"
-msgstr "複製檔案 &mdash; 靈活的方法"
-
-#. Tag: para
-#: install-methods.xml:416
-#, fuzzy, no-c-format
-#| msgid ""
-#| "If you like more flexibility or just want to know what's going on, you "
-#| "should use the following method to put the files on your stick."
-msgid ""
-"If you like more flexibility or just want to know what's going on, you "
-"should use the following method to put the files on your stick. One "
-"advantage of using this method is that &mdash; if the capacity of your USB "
-"stick is large enough &mdash; you have the option of copying any ISO image, "
-"even a DVD image, to it."
-msgstr ""
-"如果您需要更多的靈活性或者只是想瞭解其間發生了什麼，您應該使用下面的方法來把"
-"檔案放到您的隨身碟上。"
-
-#. Tag: title
-#: install-methods.xml:431
-#, no-c-format
-msgid "Partitioning and adding a boot loader"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:432
-#, no-c-format
-msgid ""
-"We will show how to set up the memory stick to use the first partition, "
-"instead of the entire device."
-msgstr "我們將展示如何使用隨身碟的第一個分割區，而不是整個設備。"
-
-#. Tag: para
-#: install-methods.xml:437
-#, fuzzy, no-c-format
-#| msgid ""
-#| "In order to start the kernel after booting from the USB stick, we will "
-#| "put a boot loader on the stick. Although any boot loader (e.g. "
-#| "<classname>lilo</classname>) should work, it's convenient to use "
-#| "<classname>syslinux</classname>, since it uses a FAT16 partition and can "
-#| "be reconfigured by just editing a text file. Any operating system which "
-#| "supports the FAT file system can be used to make changes to the "
-#| "configuration of the boot loader."
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. Although any boot loader should work, it's "
-"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
-"partition and can be reconfigured by just editing a text file. Any operating "
-"system which supports the FAT file system can be used to make changes to the "
-"configuration of the boot loader."
-msgstr ""
-"為了能在 USB 隨身碟開機後啟動核心，我們要在 USB 隨身碟上放入一個 boot-"
-"loader。儘管任何 boot-loader (例如 <command>lilo</command>) 都應該可以勝任這"
-"個工作，不過還是使用 <command>syslinux</command> 更方便。主要原因是是它可以使"
-"用 FAT16 分割區，而且只需要編輯一個文字檔案就能對其進行設定。任何支援 FAT 檔"
-"案系統的操作系統可以用來改變 boot-loader 的設定檔案。"
-
-#. Tag: para
-#: install-methods.xml:447
-#, no-c-format
-msgid ""
-"First, you need to install the <classname>syslinux</classname> and "
-"<classname>mtools</classname> packages on your system."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:452
-#, fuzzy, no-c-format
-msgid ""
-"Since most USB sticks come pre-configured with a single FAT16 partition, you "
-"probably won't have to repartition or reformat the stick. If you have to do "
-"that anyway, use <command>cfdisk</command> or any other partitioning tool to "
-"create a FAT16 partition now<footnote> <para> Don't forget to activate the "
-"<quote>bootable</quote> flag. </para> </footnote>, and then install an MBR "
-"using: <informalexample><screen>\n"
-"# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
-"</screen></informalexample> Now create the filesystem using: "
-"<informalexample><screen>\n"
-"# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
-"</screen></informalexample> Take care that you use the correct device name "
-"for your USB stick. The <command>mkdosfs</command> command is contained in "
-"the <classname>dosfstools</classname> &debian; package."
-msgstr ""
-"由於大多數 USB 隨身碟預先設置了一個單獨的 FAT16 分割區， 您可能不需要重新分割"
-"或者格式化 USB 隨身碟。如果您必須這麼做，請使用 <command>cfdisk</command> 或"
-"者其他的分割工具來建立一個 FAT16 分割區並且輸入:<informalexample><screen>\n"
-"# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
-"</screen></informalexample> 注意使用正確的 USB 隨身碟設備名稱。 "
-"<command>mkdosfs</command> 指令包含在 <classname>dosfstools</classname> "
-"&debian; 套件中。"
-
-#. Tag: para
-#: install-methods.xml:475
-#, fuzzy, no-c-format
-#| msgid ""
-#| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
-#| "stick, install the <classname>syslinux</classname> and <classname>mtools</"
-#| "classname> packages on your system, and do: <informalexample><screen>\n"
-#| "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
-#| "</screen></informalexample> Again, take care that you use the correct "
-#| "device name. The partition must not be mounted when starting "
-#| "<command>syslinux</command>. This procedure writes a boot sector to the "
-#| "partition and creates the file <filename>ldlinux.sys</filename> which "
-#| "contains the boot loader code."
-msgid ""
-"Having a correctly partitioned USB stick (now), you need to put "
-"<classname>syslinux</classname> on the FAT16 partition with: "
-"<informalexample><screen>\n"
-"# syslinux /dev/<replaceable>sdX1</replaceable>\n"
-"</screen></informalexample> Again, take care that you use the correct device "
-"name. The partition must not be mounted when starting <command>syslinux</"
-"command>. This procedure writes a boot sector to the partition and creates "
-"the file <filename>ldlinux.sys</filename> which contains the boot loader "
-"code."
-msgstr ""
-"為了把 <classname>syslinux</classname> 放到您的 USB 隨身碟的 FAT16 分割區上，"
-"請在您的系統中安裝 <classname>syslinux</classname> 和 <classname>mtools</"
-"classname> 套件，然後執行：<informalexample><screen>\n"
-"# syslinux /dev/<replaceable>sdX1</replaceable>\n"
-"</screen></informalexample> 再提醒一次，請確認您使用的是正確的設備名稱。還"
-"有，一定不能在啟動 <classname>syslinux</classname> 的時候掛載該分割區，因為在"
-"操作過程中會向分割區的開機磁區寫入資料並且建立包含 boot-loader 代碼的 "
-"<filename>ldlinux.sys</filename> 檔案。"
-
-#. Tag: title
-#: install-methods.xml:491
-#, fuzzy, no-c-format
-#| msgid "Adding an ISO image"
-msgid "Adding the installer files"
-msgstr "添加 ISO 映像"
-
-#. Tag: para
-#: install-methods.xml:492
-#, no-c-format
-msgid ""
-"There are two different installation variants to choose here: The hd-media "
-"variant needs an installation ISO file on the stick, to load installer "
-"modules and the base system from. The netboot installer however will load "
-"all that from a &debian; mirror."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:499
-#, fuzzy, no-c-format
-#| msgid ""
-#| "Mount the partition (<userinput>mount /dev/sda1 /mnt</userinput>) and "
-#| "copy the following files from the Debian archives to the stick: "
-#| "<itemizedlist> <listitem><para> <filename>vmlinuz</filename> (kernel "
-#| "binary) </para></listitem> <listitem><para> <filename>initrd.gz</"
-#| "filename> (initial ramdisk image) </para></listitem> <listitem><para> "
-#| "<filename>syslinux.cfg</filename> (SYSLINUX configuration file) </para></"
-#| "listitem> <listitem><para> Optional kernel modules </para></listitem> </"
-#| "itemizedlist> If you want to rename the files, please note that "
-#| "<command>SYSLINUX</command> can only process DOS (8.3) file names."
-msgid ""
-"According to your choice, you have to download some installer files from the "
-"hd-media or netboot subdirectory of <ulink url=\"&url-debian-installer;images"
-"\">debian/dists/&releasename;/main/installer-&architecture;/current/images/</"
-"ulink> on any &debian; mirror: <itemizedlist> <listitem><para> "
-"<filename>vmlinuz</filename> or <filename>linux</filename> (kernel binary) </"
-"para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
-"ramdisk image) </para></listitem> </itemizedlist> You can choose between "
-"either the text-based version of the installer (the files can be found "
-"directly in hd-media or netboot) or the graphical version (look in the "
-"respective <filename>gtk</filename> subdirectories)."
-msgstr ""
-"接下來就是掛載分割區 (<userinput>mount /dev/sda1 /mnt</userinput>) 以及將下列"
-"檔案從 &debian; 檔案庫拷貝到儲存上：<itemizedlist> <listitem><para> "
-"<filename>vmlinuz</filename> (核心二進位檔案) </para></listitem> "
-"<listitem><para> <filename>initrd.gz</filename> (初始化記憶體映像檔) </"
-"para></listitem> <listitem><para> <filename>syslinux.cfg</filename> "
-"(SYSLINUX 設定檔案) </para></listitem> <listitem><para> 可選的核心模組 </"
-"para></listitem> </itemizedlist> 如果您想為這些檔名更名，請注意 "
-"<command>SYSLINUX</command> 只能處理 DOS (8.3) 格式的檔案名稱。"
-
-#. Tag: para
-#: install-methods.xml:523
-#, fuzzy, no-c-format
-#| msgid ""
-#| "Mount the partition (<userinput>mount /dev/sda2 /mnt</userinput>) and "
-#| "copy the following files from the Debian archives to the stick:"
-msgid ""
-"Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
-"replaceable> /mnt</userinput>) and copy the downloaded files to the root "
-"directory of the stick."
-msgstr ""
-"接下來就是掛載分割區 (<userinput>mount /dev/sda2 /mnt</userinput>) 以及將下列"
-"檔案從 &debian; 檔案庫拷貝到儲存上："
-
-#. Tag: para
-#: install-methods.xml:529
-#, fuzzy, no-c-format
-msgid ""
-"Next you should create a text file named <filename>syslinux.cfg</filename> "
-"in the root directory of the stick as configuration file for syslinux, which "
-"at a bare minimum should contain the following line: "
-"<informalexample><screen>\n"
-"default vmlinuz initrd=initrd.gz\n"
-"</screen></informalexample> Change the name of the kernel binary to "
-"<quote><filename>linux</filename></quote> if you used files from "
-"<filename>netboot</filename>."
-msgstr ""
-"<filename>syslinux.cfg</filename> 設定檔案應該含有下列兩行： "
-"<informalexample><screen>\n"
-"default vmlinuz initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
-"</screen></informalexample> 請注意，根據開機的映像大小，在必要的時候，您可能"
-"需要增大 <userinput>ramdisk_size</userinput> 參數的數值。<phrase condition="
-"\"sarge\">如果開機失敗，您可以嘗試添加 <userinput>devfs=mount,dall</"
-"userinput> 到 <quote>append</quote> 那一行。</phrase>"
-
-#. Tag: para
-#: install-methods.xml:540
-#, no-c-format
-msgid ""
-"For the graphical installer (from <filename>gtk</filename>) you should add "
-"<userinput>vga=788</userinput> at the end of the line. Other parameters can "
-"be appended as desired."
+"</screen></informalexample> Simply writing the installation image to USB "
+"like this should work fine for most users. For special needs there is this "
+"<ulink url=\"https://wiki.debian.org/DebianInstaller/CreateUSBMedia\">wiki "
+"page</ulink>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:289
 #, no-c-format
 msgid ""
-"To enable the boot prompt to permit further parameter appending, add a "
-"<userinput>prompt 1</userinput> line."
+"Information about how to do this on other operating systems can be found in "
+"the <ulink url=\"&url-debian-cd-faq-write-usb;\">Debian CD FAQ</ulink>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:551
+#: install-methods.xml:294
 #, no-c-format
 msgid ""
-"If you used files from <filename>hd-media</filename>, you should now copy "
-"the ISO file of a &debian; installation image onto the stick. (For the "
-"<filename>netboot</filename> variant this is not needed.)"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:557
-#, no-c-format
-msgid ""
-"You can use either a netinst or a full CD/DVD image (see <xref linkend="
-"\"official-cdrom\"/>). Be sure to select one that fits on your stick. Note "
-"that the <quote>netboot <filename>mini.iso</filename></quote> image is not "
-"usable for this purpose."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:564
-#, fuzzy, no-c-format
-#| msgid ""
-#| "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
-#| "userinput>) and activate its write protection switch."
-msgid ""
-"When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
-"userinput>)."
+"The image must be written to the whole-disk device and not a partition, e."
+"g. /dev/sdb and not /dev/sdb1. Do not use tools like <command>unetbootin</"
+"command> which alter the image."
 msgstr ""
-"當您完成後，卸載 USB 隨身碟 (<userinput>umount /mnt</userinput>) 並打開防寫保"
-"護。"
 
 #. Tag: title
-#: install-methods.xml:694
+#: install-methods.xml:311
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "準備從硬碟開機的檔案"
 
 #. Tag: para
-#: install-methods.xml:695
+#: install-methods.xml:312
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The installer may be booted using boot files placed on an existing hard "
@@ -838,7 +435,7 @@ msgstr ""
 "或者直接使用 BIOS 提供的 boot-loader 直接啟動。"
 
 #. Tag: para
-#: install-methods.xml:703
+#: install-methods.xml:320
 #, fuzzy, no-c-format
 #| msgid ""
 #| "A full, <quote>pure network</quote> installation can be achieved using "
@@ -855,7 +452,7 @@ msgstr ""
 "不清。"
 
 #. Tag: title
-#: install-methods.xml:733
+#: install-methods.xml:350
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Hard disk installer booting using <command>LILO</command> or "
@@ -865,7 +462,7 @@ msgstr ""
 "使用 <command>LILO</command> 或 <command>GRUB</command>啟動硬碟安裝程式"
 
 #. Tag: para
-#: install-methods.xml:735
+#: install-methods.xml:352
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This section explains how to add to or even replace an existing linux "
@@ -879,7 +476,7 @@ msgstr ""
 "或者甚至替換現有的 linux 安裝。"
 
 #. Tag: para
-#: install-methods.xml:741
+#: install-methods.xml:358
 #, fuzzy, no-c-format
 #| msgid ""
 #| "At boot time, both bootloaders support loading in memory not only the "
@@ -894,7 +491,7 @@ msgstr ""
 "擬磁碟可以被用做核心的根檔案系統。"
 
 #. Tag: para
-#: install-methods.xml:747
+#: install-methods.xml:364
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Copy the following files from the Debian archives to a convenient "
@@ -908,19 +505,19 @@ msgstr ""
 "boot/newinstall/</filename>。"
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:371
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename>(核心二進位文件)"
 
 #. Tag: para
-#: install-methods.xml:759
+#: install-methods.xml:376
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (記憶體虛擬磁碟映像)"
 
 #. Tag: para
-#: install-methods.xml:766
+#: install-methods.xml:383
 #, fuzzy, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -934,7 +531,7 @@ msgstr ""
 "作。"
 
 #. Tag: para
-#: install-methods.xml:775
+#: install-methods.xml:392
 #, fuzzy, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -949,7 +546,7 @@ msgstr ""
 "literal>)。安裝程式就可以不使用網路而從硬碟開機，並且從光碟映像檔上安裝。"
 
 #. Tag: para
-#: install-methods.xml:783
+#: install-methods.xml:400
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -957,66 +554,13 @@ msgid ""
 msgstr "最後，要設定 boot-loader，請進入 <xref linkend=\"boot-initrd\"/>。"
 
 #. Tag: title
-#: install-methods.xml:793
-#, fuzzy, no-c-format
-#| msgid ""
-#| "Hard disk installer booting using <command>LILO</command> or "
-#| "<command>GRUB</command>"
-msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
-msgstr ""
-"使用 <command>LILO</command> 或 <command>GRUB</command>啟動硬碟安裝程式"
-
-#. Tag: para
-#: install-methods.xml:794
-#, fuzzy, no-c-format
-#| msgid ""
-#| "This section explains how to add to or even replace an existing linux "
-#| "installation using either <command>LILO</command> or <command>GRUB</"
-#| "command>."
-msgid ""
-"This section explains how to prepare your hard drive for booting the "
-"installer from DOS using <command>loadlin</command>."
-msgstr ""
-"這一節將解釋如何透過 <command>LILO</command> 或 <command>GRUB</command> 增加"
-"或者甚至替換現有的 linux 安裝。"
-
-#. Tag: para
-#: install-methods.xml:799
-#, fuzzy, no-c-format
-#| msgid ""
-#| "Copy the following files from the Debian archives to a convenient "
-#| "location on your hard drive, for instance to <filename>/boot/newinstall/</"
-#| "filename>."
-msgid ""
-"Copy the following directories from a &debian; installation image to "
-"<filename>c:\\</filename>."
-msgstr ""
-"將以下檔案從 &debian; 檔案庫中拷貝到硬碟中比較方便的地方，例如 <filename>/"
-"boot/newinstall/</filename>。"
-
-#. Tag: para
-#: install-methods.xml:804
-#, fuzzy, no-c-format
-#| msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
-msgid ""
-"<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
-msgstr "<filename>initrd.gz</filename> (初始化記憶體映像檔)"
-
-#. Tag: para
-#: install-methods.xml:809
-#, fuzzy, no-c-format
-#| msgid "<filename>boot.msg</filename> (optional boot message)"
-msgid "<filename>/tools</filename> (loadlin tool)"
-msgstr "<filename>boot.msg</filename> (可選的啟動資訊)"
-
-#. Tag: title
-#: install-methods.xml:827
+#: install-methods.xml:415
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "準備以 TFTP 網路開機用的檔案"
 
 #. Tag: para
-#: install-methods.xml:828
+#: install-methods.xml:416
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1030,7 +574,7 @@ msgstr ""
 "上面的某個特殊地方，並且設定您的機器從該機器進行開機。"
 
 #. Tag: para
-#: install-methods.xml:836
+#: install-methods.xml:424
 #, fuzzy, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1042,7 +586,7 @@ msgstr ""
 "condition=\"supports-dhcp\">，又或 DHCP 伺服器</phrase>。"
 
 #. Tag: para
-#: install-methods.xml:843
+#: install-methods.xml:431
 #, fuzzy, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1062,7 +606,7 @@ msgstr ""
 "只能透過 DHCP 來配置。</phrase>"
 
 #. Tag: para
-#: install-methods.xml:869
+#: install-methods.xml:457
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1076,7 +620,7 @@ msgstr ""
 "上面的一些操作例子。"
 
 #. Tag: para
-#: install-methods.xml:877
+#: install-methods.xml:465
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1086,13 +630,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:893
+#: install-methods.xml:481
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "設置 RARP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:894
+#: install-methods.xml:482
 #, fuzzy, no-c-format
 #| msgid ""
 #| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1115,7 +659,7 @@ msgstr ""
 "<userinput>ip addr show dev eth0</userinput> 指令。"
 
 #. Tag: para
-#: install-methods.xml:903
+#: install-methods.xml:491
 #, fuzzy, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1135,13 +679,13 @@ msgstr ""
 "使用 <userinput>/usr/sbin/rarpd -a</userinput> 指令。"
 
 #. Tag: title
-#: install-methods.xml:924
+#: install-methods.xml:512
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "設置 DHCP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:925
+#: install-methods.xml:513
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1151,7 +695,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:932
+#: install-methods.xml:520
 #, fuzzy, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1201,7 +745,7 @@ msgstr ""
 "檔。"
 
 #. Tag: para
-#: install-methods.xml:934
+#: install-methods.xml:522
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1217,7 +761,7 @@ msgstr ""
 "TFTP 取得的檔案名稱。"
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:532
 #, fuzzy, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1227,13 +771,13 @@ msgstr ""
 "<userinput>/etc/init.d/dhcpd restart</userinput>。"
 
 #. Tag: title
-#: install-methods.xml:952
+#: install-methods.xml:540
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "在 DHCP 設定中打開 PXE 開機功能"
 
 #. Tag: para
-#: install-methods.xml:953
+#: install-methods.xml:541
 #, fuzzy, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1305,7 +849,7 @@ msgstr ""
 "面的<xref linkend=\"tftp-images\"/> )。"
 
 #. Tag: para
-#: install-methods.xml:963
+#: install-methods.xml:551
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1313,7 +857,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:967
+#: install-methods.xml:555
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1327,13 +871,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:980
+#: install-methods.xml:568
 #, fuzzy, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "設置 BOOTP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:981
+#: install-methods.xml:569
 #, fuzzy, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1348,7 +892,7 @@ msgstr ""
 "classname> 軟體套件中。"
 
 #. Tag: para
-#: install-methods.xml:989
+#: install-methods.xml:577
 #, fuzzy, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1401,7 +945,7 @@ msgstr ""
 "的 MAC 位址。 </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1016
+#: install-methods.xml:604
 #, fuzzy, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1422,13 +966,13 @@ msgstr ""
 "令是：<userinput>/etc/init.d/dhcpd restart</userinput>。"
 
 #. Tag: title
-#: install-methods.xml:1035
+#: install-methods.xml:623
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "啟用 TFTP 伺服器"
 
 #. Tag: para
-#: install-methods.xml:1036
+#: install-methods.xml:624
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1436,7 +980,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1041
+#: install-methods.xml:629
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1447,7 +991,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1050
+#: install-methods.xml:638
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1459,7 +1003,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1060
+#: install-methods.xml:648
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1470,13 +1014,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1072
+#: install-methods.xml:660
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "將 TFTP 映像放到適當的位置"
 
 #. Tag: para
-#: install-methods.xml:1073
+#: install-methods.xml:661
 #, fuzzy, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1492,7 +1036,7 @@ msgstr ""
 "個強制的標準。"
 
 #. Tag: para
-#: install-methods.xml:1124
+#: install-methods.xml:712
 #, fuzzy, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1509,13 +1053,13 @@ msgstr ""
 "所需的檔案名傳遞至 <command>tftpd</command>。"
 
 #. Tag: title
-#: install-methods.xml:1143
+#: install-methods.xml:731
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "自動化安裝"
 
 #. Tag: para
-#: install-methods.xml:1144
+#: install-methods.xml:732
 #, fuzzy, no-c-format
 #| msgid ""
 #| "For installing on multiple computers it's possible to do fully automatic "
@@ -1536,13 +1080,13 @@ msgstr ""
 "<classname>autoinstall</classname>，以及 &debian; 安裝程式本身。"
 
 #. Tag: title
-#: install-methods.xml:1156
+#: install-methods.xml:744
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "使用 &debian; 安裝程式進行自動安裝"
 
 #. Tag: para
-#: install-methods.xml:1157
+#: install-methods.xml:745
 #, fuzzy, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -1554,7 +1098,7 @@ msgstr ""
 "者可從移動媒介上載入，並且被用來在安裝過程中自動回答問題。"
 
 #. Tag: para
-#: install-methods.xml:1164
+#: install-methods.xml:752
 #, fuzzy, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -1564,13 +1108,13 @@ msgstr ""
 "註解並能正常工作的預先設定檔例子：<xref linkend=\"example-preseed\"/>。"
 
 #. Tag: title
-#: install-methods.xml:1178
+#: install-methods.xml:766
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1180
+#: install-methods.xml:768
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -1580,7 +1124,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1191
+#: install-methods.xml:779
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1588,7 +1132,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1197
+#: install-methods.xml:785
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1596,7 +1140,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1203
+#: install-methods.xml:791
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1604,7 +1148,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1209
+#: install-methods.xml:797
 #, no-c-format
 msgid ""
 "<ulink url=\"http://&archive-mirror;/debian/dists/&releasename;/main/"
@@ -1613,7 +1157,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1217
+#: install-methods.xml:805
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -1627,7 +1171,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1230
+#: install-methods.xml:818
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -1638,6 +1182,287 @@ msgid ""
 "files themselves."
 msgstr ""
 
+#, fuzzy, no-c-format
+#~| msgid "Booting the USB stick"
+#~ msgid "Manually copying files to the USB stick"
+#~ msgstr "以 USB 隨身碟開機"
+
+#, fuzzy, no-c-format
+#~ msgid ""
+#~ "An alternative to the method described in <xref linkend=\"usb-copy-"
+#~ "isohybrid\"/> is to manually copy the installer files, and also an "
+#~ "installation image to the stick. Note that the USB stick should be at "
+#~ "least 1 GB in size (smaller setups are possible using the files from "
+#~ "netboot, following <xref linkend=\"usb-copy-flexible\"/>)."
+#~ msgstr ""
+#~ "注意，USB 隨身碟應該至少有 128MB 的容量 (在更小的大小安裝也是可能的，請參"
+#~ "閱 <xref linkend=\"usb-copy-flexible\"/>)。"
+
+#, fuzzy, no-c-format
+#~ msgid ""
+#~ "There is an all-in-one file &hdmedia-boot-img; which contains all the "
+#~ "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
+#~ "<classname>syslinux</classname> and its configuration file</phrase>."
+#~ msgstr ""
+#~ "這裡有一個單一檔案 &hdmedia-boot-img;，其中包含了所有的安裝程式文件 (包括"
+#~ "核心)，以及 <command>syslinux</command> 和它的設定檔案。您只需要把它直接解"
+#~ "壓縮到您的 USB 隨身碟內即可：<informalexample><screen>\n"
+#~ "# zcat boot.img.gz &gt; /dev/<replaceable>sda</replaceable>\n"
+#~ "</screen></informalexample> 當然，這會刪除設備上現存的所有內容，因此請仔細"
+#~ "檢查您使用的是正確的 USB 隨身碟設備名稱。"
+
+#, no-c-format
+#~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
+#~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
+
+#, fuzzy, no-c-format
+#~ msgid ""
+#~ "After that, mount the USB memory stick <phrase arch="
+#~ "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
+#~ "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
+#~ "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
+#~ "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
+#~ "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
+#~ "image (netinst or full CD; see <xref linkend=\"official-cdrom\"/>) to it. "
+#~ "Unmount the stick (<userinput>umount /mnt</userinput>) and you are done."
+#~ msgstr ""
+#~ "然後，掛載 USB 隨身碟 (<userinput>mount <replaceable arch=\"i386\">/dev/"
+#~ "sda</replaceable> <replaceable arch=\"powerpc\">/dev/sda2</replaceable> /"
+#~ "mnt</userinput>)，它上面應該已經具有<phrase arch=\"i386\">一個 FAT 檔案系"
+#~ "統</phrase> <phrase arch=\"powerpc\">一個 HFS 檔案系統</phrase>，您再將一"
+#~ "個 &debian; netinst (網路安裝) 或 businesscard (名片型安裝) ISO 映像檔拷貝"
+#~ "到隨身碟上。請注意檔案名稱必須以 <filename>.iso</filename> 結尾。卸載隨身"
+#~ "碟 (<userinput>umount /mnt</userinput>) 後結束。"
+
+#, fuzzy, no-c-format
+#~| msgid "Copying the files &mdash; the flexible way"
+#~ msgid "Manually copying files to the USB stick &mdash; the flexible way"
+#~ msgstr "複製檔案 &mdash; 靈活的方法"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "If you like more flexibility or just want to know what's going on, you "
+#~| "should use the following method to put the files on your stick."
+#~ msgid ""
+#~ "If you like more flexibility or just want to know what's going on, you "
+#~ "should use the following method to put the files on your stick. One "
+#~ "advantage of using this method is that &mdash; if the capacity of your "
+#~ "USB stick is large enough &mdash; you have the option of copying any ISO "
+#~ "image, even a DVD image, to it."
+#~ msgstr ""
+#~ "如果您需要更多的靈活性或者只是想瞭解其間發生了什麼，您應該使用下面的方法來"
+#~ "把檔案放到您的隨身碟上。"
+
+#, no-c-format
+#~ msgid ""
+#~ "We will show how to set up the memory stick to use the first partition, "
+#~ "instead of the entire device."
+#~ msgstr "我們將展示如何使用隨身碟的第一個分割區，而不是整個設備。"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "In order to start the kernel after booting from the USB stick, we will "
+#~| "put a boot loader on the stick. Although any boot loader (e.g. "
+#~| "<classname>lilo</classname>) should work, it's convenient to use "
+#~| "<classname>syslinux</classname>, since it uses a FAT16 partition and can "
+#~| "be reconfigured by just editing a text file. Any operating system which "
+#~| "supports the FAT file system can be used to make changes to the "
+#~| "configuration of the boot loader."
+#~ msgid ""
+#~ "In order to start the kernel after booting from the USB stick, we will "
+#~ "put a boot loader on the stick. Although any boot loader should work, "
+#~ "it's convenient to use <classname>syslinux</classname>, since it uses a "
+#~ "FAT16 partition and can be reconfigured by just editing a text file. Any "
+#~ "operating system which supports the FAT file system can be used to make "
+#~ "changes to the configuration of the boot loader."
+#~ msgstr ""
+#~ "為了能在 USB 隨身碟開機後啟動核心，我們要在 USB 隨身碟上放入一個 boot-"
+#~ "loader。儘管任何 boot-loader (例如 <command>lilo</command>) 都應該可以勝任"
+#~ "這個工作，不過還是使用 <command>syslinux</command> 更方便。主要原因是是它"
+#~ "可以使用 FAT16 分割區，而且只需要編輯一個文字檔案就能對其進行設定。任何支"
+#~ "援 FAT 檔案系統的操作系統可以用來改變 boot-loader 的設定檔案。"
+
+#, fuzzy, no-c-format
+#~ msgid ""
+#~ "Since most USB sticks come pre-configured with a single FAT16 partition, "
+#~ "you probably won't have to repartition or reformat the stick. If you have "
+#~ "to do that anyway, use <command>cfdisk</command> or any other "
+#~ "partitioning tool to create a FAT16 partition now<footnote> <para> Don't "
+#~ "forget to activate the <quote>bootable</quote> flag. </para> </footnote>, "
+#~ "and then install an MBR using: <informalexample><screen>\n"
+#~ "# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
+#~ "</screen></informalexample> Now create the filesystem using: "
+#~ "<informalexample><screen>\n"
+#~ "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
+#~ "</screen></informalexample> Take care that you use the correct device "
+#~ "name for your USB stick. The <command>mkdosfs</command> command is "
+#~ "contained in the <classname>dosfstools</classname> &debian; package."
+#~ msgstr ""
+#~ "由於大多數 USB 隨身碟預先設置了一個單獨的 FAT16 分割區， 您可能不需要重新"
+#~ "分割或者格式化 USB 隨身碟。如果您必須這麼做，請使用 <command>cfdisk</"
+#~ "command> 或者其他的分割工具來建立一個 FAT16 分割區並且輸入:"
+#~ "<informalexample><screen>\n"
+#~ "# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
+#~ "</screen></informalexample> 注意使用正確的 USB 隨身碟設備名稱。 "
+#~ "<command>mkdosfs</command> 指令包含在 <classname>dosfstools</classname> "
+#~ "&debian; 套件中。"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "To put <classname>syslinux</classname> on the FAT16 partition on your "
+#~| "USB stick, install the <classname>syslinux</classname> and "
+#~| "<classname>mtools</classname> packages on your system, and do: "
+#~| "<informalexample><screen>\n"
+#~| "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#~| "</screen></informalexample> Again, take care that you use the correct "
+#~| "device name. The partition must not be mounted when starting "
+#~| "<command>syslinux</command>. This procedure writes a boot sector to the "
+#~| "partition and creates the file <filename>ldlinux.sys</filename> which "
+#~| "contains the boot loader code."
+#~ msgid ""
+#~ "Having a correctly partitioned USB stick (now), you need to put "
+#~ "<classname>syslinux</classname> on the FAT16 partition with: "
+#~ "<informalexample><screen>\n"
+#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#~ "</screen></informalexample> Again, take care that you use the correct "
+#~ "device name. The partition must not be mounted when starting "
+#~ "<command>syslinux</command>. This procedure writes a boot sector to the "
+#~ "partition and creates the file <filename>ldlinux.sys</filename> which "
+#~ "contains the boot loader code."
+#~ msgstr ""
+#~ "為了把 <classname>syslinux</classname> 放到您的 USB 隨身碟的 FAT16 分割區"
+#~ "上，請在您的系統中安裝 <classname>syslinux</classname> 和 "
+#~ "<classname>mtools</classname> 套件，然後執行：<informalexample><screen>\n"
+#~ "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#~ "</screen></informalexample> 再提醒一次，請確認您使用的是正確的設備名稱。還"
+#~ "有，一定不能在啟動 <classname>syslinux</classname> 的時候掛載該分割區，因"
+#~ "為在操作過程中會向分割區的開機磁區寫入資料並且建立包含 boot-loader 代碼的 "
+#~ "<filename>ldlinux.sys</filename> 檔案。"
+
+#, fuzzy, no-c-format
+#~| msgid "Adding an ISO image"
+#~ msgid "Adding the installer files"
+#~ msgstr "添加 ISO 映像"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "Mount the partition (<userinput>mount /dev/sda1 /mnt</userinput>) and "
+#~| "copy the following files from the Debian archives to the stick: "
+#~| "<itemizedlist> <listitem><para> <filename>vmlinuz</filename> (kernel "
+#~| "binary) </para></listitem> <listitem><para> <filename>initrd.gz</"
+#~| "filename> (initial ramdisk image) </para></listitem> <listitem><para> "
+#~| "<filename>syslinux.cfg</filename> (SYSLINUX configuration file) </para></"
+#~| "listitem> <listitem><para> Optional kernel modules </para></listitem> </"
+#~| "itemizedlist> If you want to rename the files, please note that "
+#~| "<command>SYSLINUX</command> can only process DOS (8.3) file names."
+#~ msgid ""
+#~ "According to your choice, you have to download some installer files from "
+#~ "the hd-media or netboot subdirectory of <ulink url=\"&url-debian-"
+#~ "installer;images\">debian/dists/&releasename;/main/installer-"
+#~ "&architecture;/current/images/</ulink> on any &debian; mirror: "
+#~ "<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
+#~ "<filename>linux</filename> (kernel binary) </para></listitem> "
+#~ "<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
+#~ "para></listitem> </itemizedlist> You can choose between either the text-"
+#~ "based version of the installer (the files can be found directly in hd-"
+#~ "media or netboot) or the graphical version (look in the respective "
+#~ "<filename>gtk</filename> subdirectories)."
+#~ msgstr ""
+#~ "接下來就是掛載分割區 (<userinput>mount /dev/sda1 /mnt</userinput>) 以及將"
+#~ "下列檔案從 &debian; 檔案庫拷貝到儲存上：<itemizedlist> <listitem><para> "
+#~ "<filename>vmlinuz</filename> (核心二進位檔案) </para></listitem> "
+#~ "<listitem><para> <filename>initrd.gz</filename> (初始化記憶體映像檔) </"
+#~ "para></listitem> <listitem><para> <filename>syslinux.cfg</filename> "
+#~ "(SYSLINUX 設定檔案) </para></listitem> <listitem><para> 可選的核心模組 </"
+#~ "para></listitem> </itemizedlist> 如果您想為這些檔名更名，請注意 "
+#~ "<command>SYSLINUX</command> 只能處理 DOS (8.3) 格式的檔案名稱。"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "Mount the partition (<userinput>mount /dev/sda2 /mnt</userinput>) and "
+#~| "copy the following files from the Debian archives to the stick:"
+#~ msgid ""
+#~ "Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+#~ "replaceable> /mnt</userinput>) and copy the downloaded files to the root "
+#~ "directory of the stick."
+#~ msgstr ""
+#~ "接下來就是掛載分割區 (<userinput>mount /dev/sda2 /mnt</userinput>) 以及將"
+#~ "下列檔案從 &debian; 檔案庫拷貝到儲存上："
+
+#, fuzzy, no-c-format
+#~ msgid ""
+#~ "Next you should create a text file named <filename>syslinux.cfg</"
+#~ "filename> in the root directory of the stick as configuration file for "
+#~ "syslinux, which at a bare minimum should contain the following line: "
+#~ "<informalexample><screen>\n"
+#~ "default vmlinuz initrd=initrd.gz\n"
+#~ "</screen></informalexample> Change the name of the kernel binary to "
+#~ "<quote><filename>linux</filename></quote> if you used files from "
+#~ "<filename>netboot</filename>."
+#~ msgstr ""
+#~ "<filename>syslinux.cfg</filename> 設定檔案應該含有下列兩行： "
+#~ "<informalexample><screen>\n"
+#~ "default vmlinuz initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw\n"
+#~ "</screen></informalexample> 請注意，根據開機的映像大小，在必要的時候，您可"
+#~ "能需要增大 <userinput>ramdisk_size</userinput> 參數的數值。<phrase "
+#~ "condition=\"sarge\">如果開機失敗，您可以嘗試添加 <userinput>devfs=mount,"
+#~ "dall</userinput> 到 <quote>append</quote> 那一行。</phrase>"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+#~| "userinput>) and activate its write protection switch."
+#~ msgid ""
+#~ "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+#~ "userinput>)."
+#~ msgstr ""
+#~ "當您完成後，卸載 USB 隨身碟 (<userinput>umount /mnt</userinput>) 並打開防"
+#~ "寫保護。"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "Hard disk installer booting using <command>LILO</command> or "
+#~| "<command>GRUB</command>"
+#~ msgid ""
+#~ "Hard disk installer booting from DOS using <command>loadlin</command>"
+#~ msgstr ""
+#~ "使用 <command>LILO</command> 或 <command>GRUB</command>啟動硬碟安裝程式"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "This section explains how to add to or even replace an existing linux "
+#~| "installation using either <command>LILO</command> or <command>GRUB</"
+#~| "command>."
+#~ msgid ""
+#~ "This section explains how to prepare your hard drive for booting the "
+#~ "installer from DOS using <command>loadlin</command>."
+#~ msgstr ""
+#~ "這一節將解釋如何透過 <command>LILO</command> 或 <command>GRUB</command> 增"
+#~ "加或者甚至替換現有的 linux 安裝。"
+
+#, fuzzy, no-c-format
+#~| msgid ""
+#~| "Copy the following files from the Debian archives to a convenient "
+#~| "location on your hard drive, for instance to <filename>/boot/newinstall/"
+#~| "</filename>."
+#~ msgid ""
+#~ "Copy the following directories from a &debian; installation image to "
+#~ "<filename>c:\\</filename>."
+#~ msgstr ""
+#~ "將以下檔案從 &debian; 檔案庫中拷貝到硬碟中比較方便的地方，例如 <filename>/"
+#~ "boot/newinstall/</filename>。"
+
+#, fuzzy, no-c-format
+#~| msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
+#~ msgid ""
+#~ "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
+#~ msgstr "<filename>initrd.gz</filename> (初始化記憶體映像檔)"
+
+#, fuzzy, no-c-format
+#~| msgid "<filename>boot.msg</filename> (optional boot message)"
+#~ msgid "<filename>/tools</filename> (loadlin tool)"
+#~ msgstr "<filename>boot.msg</filename> (可選的啟動資訊)"
+
 #, fuzzy
 #~ msgid ""
 #~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "