Update of POT and PO files for the manual

6 files changed, 1091 insertions, 796 deletions

diff --git a/po/zh_CN/boot-installer.po b/po/zh_CN/boot-installer.po
index c1d190fa5..f52c98616 100644
--- a/po/zh_CN/boot-installer.po
+++ b/po/zh_CN/boot-installer.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-17 08:26+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-10-25 20:36+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -1310,7 +1310,11 @@ msgid ""
 "the ide-floppy driver maps the device to. For example, if your LS-120 drive "
 "is connected as the first IDE device (master) on the second cable, you enter "
 "<userinput>linux root=/dev/hdc</userinput> at the boot prompt."
-msgstr "要想在 LS-120 驱动器(ATAPI 版本)使用这些软盘，您需指定这些软盘设备的虚拟地址。这可以通过 <emphasis>root=</emphasis> 引导参数来指定映射的 ide-floppy 驱动器设备名来完成。比如，您的 LS-120 驱动器连接到第二根线第一个 IDE 设备(master)，那么在提示符下输入 <userinput>linux root=/dev/hdc</userinput>。"
+msgstr ""
+"要想在 LS-120 驱动器(ATAPI 版本)使用这些软盘，您需指定这些软盘设备的虚拟地"
+"址。这可以通过 <emphasis>root=</emphasis> 引导参数来指定映射的 ide-floppy 驱"
+"动器设备名来完成。比如，您的 LS-120 驱动器连接到第二根线第一个 IDE 设备"
+"(master)，那么在提示符下输入 <userinput>linux root=/dev/hdc</userinput>。"
 
 #. Tag: para
 #: boot-installer.xml:963
@@ -3420,15 +3424,12 @@ msgstr "Debian 安装程序的参数"
 
 #. Tag: para
 #: boot-installer.xml:2804
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "The installation system recognizes a few additional boot "
-"parameters<footnote> <para> Note that the 2.4 kernel accepts a maximum of 8 "
-"command line options and 8 environment options (including any options added "
-"by default for the installer). If these numbers are exceeded, 2.4 kernels "
-"will drop any excess options. With kernel 2.6.9 or newer, you can use 32 "
-"command line options and 32 environment options. </para> </footnote> which "
-"may be useful."
+"parameters<footnote> <para> With current kernels (2.6.9 or newer) you can "
+"use 32 command line options and 32 environment options. If these numbers are "
+"exceeded, the kernel will panic. </para> </footnote> which may be useful."
 msgstr ""
 "安装系统能识别一些额外的引导参数<footnote> <para> 注意，2.4 内核最多可以接受 "
 "8 个命令行参数和 8 个环境变量选项(包括安装程序默认使用的选项)。如果超出，2.4 "
@@ -3436,13 +3437,13 @@ msgstr ""
 "境变量选项。</para> </footnote>，它们很有用。"
 
 #. Tag: term
-#: boot-installer.xml:2824
+#: boot-installer.xml:2821
 #, no-c-format
 msgid "debconf/priority"
 msgstr "debconf/priority"
 
 #. Tag: para
-#: boot-installer.xml:2825
+#: boot-installer.xml:2822
 #, no-c-format
 msgid ""
 "This parameter sets the lowest priority of messages to be displayed. Short "
@@ -3452,7 +3453,7 @@ msgstr ""
 "userinput>"
 
 #. Tag: para
-#: boot-installer.xml:2830
+#: boot-installer.xml:2827
 #, no-c-format
 msgid ""
 "The default installation uses <userinput>priority=high</userinput>. This "
@@ -3465,7 +3466,7 @@ msgstr ""
 "将按照要求调整优先级别。"
 
 #. Tag: para
-#: boot-installer.xml:2837
+#: boot-installer.xml:2834
 #, no-c-format
 msgid ""
 "If you add <userinput>priority=medium</userinput> as boot parameter, you "
@@ -3483,13 +3484,13 @@ msgstr ""
 "且尝试正确无误地执行各项事宜。"
 
 #. Tag: term
-#: boot-installer.xml:2851
+#: boot-installer.xml:2848
 #, no-c-format
 msgid "DEBIAN_FRONTEND"
 msgstr "DEBIAN_FRONTEND"
 
 #. Tag: para
-#: boot-installer.xml:2852
+#: boot-installer.xml:2849
 #, no-c-format
 msgid ""
 "This boot parameter controls the type of user interface used for the "
@@ -3528,13 +3529,13 @@ msgstr ""
 "用。"
 
 #. Tag: term
-#: boot-installer.xml:2888
+#: boot-installer.xml:2885
 #, no-c-format
 msgid "BOOT_DEBUG"
 msgstr "BOOT_DEBUG"
 
 #. Tag: para
-#: boot-installer.xml:2889
+#: boot-installer.xml:2886
 #, no-c-format
 msgid ""
 "Setting this boot parameter to 2 will cause the installer's boot process to "
@@ -3546,49 +3547,49 @@ msgstr ""
 "debug shell。(退出 shell 以后会继续引导过程。)"
 
 #. Tag: userinput
-#: boot-installer.xml:2898
+#: boot-installer.xml:2895
 #, no-c-format
 msgid "BOOT_DEBUG=0"
 msgstr "BOOT_DEBUG=0"
 
 #. Tag: para
-#: boot-installer.xml:2899
+#: boot-installer.xml:2896
 #, no-c-format
 msgid "This is the default."
 msgstr "此为默认。"
 
 #. Tag: userinput
-#: boot-installer.xml:2903
+#: boot-installer.xml:2900
 #, no-c-format
 msgid "BOOT_DEBUG=1"
 msgstr "BOOT_DEBUG=1"
 
 #. Tag: para
-#: boot-installer.xml:2904
+#: boot-installer.xml:2901
 #, no-c-format
 msgid "More verbose than usual."
 msgstr "更多的信息。"
 
 #. Tag: userinput
-#: boot-installer.xml:2908
+#: boot-installer.xml:2905
 #, no-c-format
 msgid "BOOT_DEBUG=2"
 msgstr "BOOT_DEBUG=2"
 
 #. Tag: para
-#: boot-installer.xml:2909
+#: boot-installer.xml:2906
 #, no-c-format
 msgid "Lots of debugging information."
 msgstr "大量的调试信息。"
 
 #. Tag: userinput
-#: boot-installer.xml:2913
+#: boot-installer.xml:2910
 #, no-c-format
 msgid "BOOT_DEBUG=3"
 msgstr "BOOT_DEBUG=3"
 
 #. Tag: para
-#: boot-installer.xml:2914
+#: boot-installer.xml:2911
 #, no-c-format
 msgid ""
 "Shells are run at various points in the boot process to allow detailed "
@@ -3598,13 +3599,13 @@ msgstr ""
 "Shell 将继续引导过程。"
 
 #. Tag: term
-#: boot-installer.xml:2928
+#: boot-installer.xml:2925
 #, no-c-format
 msgid "INSTALL_MEDIA_DEV"
 msgstr "INSTALL_MEDIA_DEV"
 
 #. Tag: para
-#: boot-installer.xml:2929
+#: boot-installer.xml:2926
 #, no-c-format
 msgid ""
 "The value of the parameter is the path to the device to load the Debian "
@@ -3615,7 +3616,7 @@ msgstr ""
 "<userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</userinput>"
 
 #. Tag: para
-#: boot-installer.xml:2935
+#: boot-installer.xml:2932
 #, no-c-format
 msgid ""
 "The boot floppy, which normally scans all floppies it can to find the root "
@@ -3625,13 +3626,13 @@ msgstr ""
 "备。"
 
 #. Tag: term
-#: boot-installer.xml:2945
+#: boot-installer.xml:2942
 #, no-c-format
 msgid "debian-installer/framebuffer"
 msgstr "debian-installer/framebuffer"
 
 #. Tag: para
-#: boot-installer.xml:2946
+#: boot-installer.xml:2943
 #, no-c-format
 msgid ""
 "Some architectures use the kernel framebuffer to offer installation in a "
@@ -3647,7 +3648,7 @@ msgstr ""
 "者 bogl 的错误信息，一个空白的屏幕，或者在开始安装几分钟后停止。"
 
 #. Tag: para
-#: boot-installer.xml:2956
+#: boot-installer.xml:2953
 #, no-c-format
 msgid ""
 "The <userinput>video=vga16:off</userinput> argument may also be used to "
@@ -3658,19 +3659,19 @@ msgstr ""
 "用 Mobile Radeon 卡的 Dell Inspiron 上面被发现。"
 
 #. Tag: para
-#: boot-installer.xml:2962
+#: boot-installer.xml:2959
 #, no-c-format
 msgid "Such problems have been reported on the Amiga 1200 and SE/30."
 msgstr "在 Amiga 1200 and SE/30 上面报告过具有有这些方面的问题。"
 
 #. Tag: para
-#: boot-installer.xml:2966
+#: boot-installer.xml:2963
 #, no-c-format
 msgid "Such problems have been reported on hppa."
 msgstr "在 hppa 上面报告过存在这些问题。"
 
 #. Tag: para
-#: boot-installer.xml:2970
+#: boot-installer.xml:2967
 #, no-c-format
 msgid ""
 "Because of display problems on some systems, framebuffer support is "
@@ -3687,13 +3688,13 @@ msgstr ""
 "<userinput>fb=true</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:2984
+#: boot-installer.xml:2981
 #, no-c-format
 msgid "debian-installer/theme"
 msgstr "debian-installer/theme"
 
 #. Tag: para
-#: boot-installer.xml:2985
+#: boot-installer.xml:2982
 #, no-c-format
 msgid ""
 "A theme determines how the user interface of the installer looks (colors, "
@@ -3710,13 +3711,13 @@ msgstr ""
 "<userinput>theme=<replaceable>dark</replaceable></userinput> 设置。"
 
 #. Tag: term
-#: boot-installer.xml:2998
+#: boot-installer.xml:2995
 #, no-c-format
 msgid "debian-installer/probe/usb"
 msgstr "debian-installer/probe/usb"
 
 #. Tag: para
-#: boot-installer.xml:2999
+#: boot-installer.xml:2996
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to prevent probing for USB on boot, if "
@@ -3726,13 +3727,13 @@ msgstr ""
 "起的问题。"
 
 #. Tag: term
-#: boot-installer.xml:3008
+#: boot-installer.xml:3005
 #, no-c-format
 msgid "netcfg/disable_dhcp"
 msgstr "netcfg/disable_dhcp"
 
 #. Tag: para
-#: boot-installer.xml:3009
+#: boot-installer.xml:3006
 #, no-c-format
 msgid ""
 "By default, the &d-i; automatically probes for network configuration via "
@@ -3744,7 +3745,7 @@ msgstr ""
 "视并且改变其获得的设定。您可以在 DHCP 检测失败的情况下手工配置网络。"
 
 #. Tag: para
-#: boot-installer.xml:3016
+#: boot-installer.xml:3013
 #, no-c-format
 msgid ""
 "If you have a DHCP server on your local network, but want to avoid it "
@@ -3757,13 +3758,13 @@ msgstr ""
 "DHCP 来配置网络并且手工输入参数。"
 
 #. Tag: term
-#: boot-installer.xml:3027
+#: boot-installer.xml:3024
 #, no-c-format
 msgid "hw-detect/start_pcmcia"
 msgstr "hw-detect/start_pcmcia"
 
 #. Tag: para
-#: boot-installer.xml:3028
+#: boot-installer.xml:3025
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to prevent starting PCMCIA services, if "
@@ -3773,13 +3774,13 @@ msgstr ""
 "题。有些笔记本电脑对此会有错误的行为。"
 
 #. Tag: term
-#: boot-installer.xml:3038
+#: boot-installer.xml:3035
 #, no-c-format
 msgid "preseed/url"
 msgstr "preseed/url"
 
 #. Tag: para
-#: boot-installer.xml:3039
+#: boot-installer.xml:3036
 #, no-c-format
 msgid ""
 "Specify the url to a preconfiguration file to download and use in automating "
@@ -3790,13 +3791,13 @@ msgstr ""
 "install\"/>。简写: <userinput>url</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:3049
+#: boot-installer.xml:3046
 #, no-c-format
 msgid "preseed/file"
 msgstr "preseed/file"
 
 #. Tag: para
-#: boot-installer.xml:3050
+#: boot-installer.xml:3047
 #, no-c-format
 msgid ""
 "Specify the path to a preconfiguration file to load to automating the "
@@ -3807,13 +3808,13 @@ msgstr ""
 ">。简写: <userinput>file</userinput>"
 
 #. Tag: term
-#: boot-installer.xml:3060
+#: boot-installer.xml:3057
 #, no-c-format
 msgid "cdrom-detect/eject"
 msgstr "cdrom-detect/eject"
 
 #. Tag: para
-#: boot-installer.xml:3061
+#: boot-installer.xml:3058
 #, no-c-format
 msgid ""
 "By default, before rebooting, &d-i; automatically ejects the optical media "
@@ -3829,7 +3830,7 @@ msgstr ""
 "重新加载介质。"
 
 #. Tag: para
-#: boot-installer.xml:3070
+#: boot-installer.xml:3067
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to disable automatic ejection, and be "
@@ -3840,25 +3841,25 @@ msgstr ""
 "后，不会自动从光盘引导。"
 
 #. Tag: term
-#: boot-installer.xml:3081
+#: boot-installer.xml:3078
 #, no-c-format
 msgid "ramdisk_size"
 msgstr "ramdisk_size"
 
 #. Tag: para
-#: boot-installer.xml:3082
+#: boot-installer.xml:3079
 #, no-c-format
 msgid "If you are using a 2.2.x kernel, you may need to set &ramdisksize;."
 msgstr "如果您在使用 2.2.x 内核，也许需要设置 &ramdisksize;。"
 
 #. Tag: term
-#: boot-installer.xml:3090
+#: boot-installer.xml:3087
 #, no-c-format
 msgid "directfb/hw-accel"
 msgstr "directfb/hw-accel"
 
 #. Tag: para
-#: boot-installer.xml:3091
+#: boot-installer.xml:3088
 #, no-c-format
 msgid ""
 "For the gtk frontend (graphical installer), hardware acceleration in "
@@ -3869,13 +3870,13 @@ msgstr ""
 "以在启动安装程序的时候设置参数为 <userinput>true</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:3101
+#: boot-installer.xml:3098
 #, no-c-format
 msgid "rescue/enable"
 msgstr "rescue/enable"
 
 #. Tag: para
-#: boot-installer.xml:3102
+#: boot-installer.xml:3099
 #, no-c-format
 msgid ""
 "Set to <userinput>true</userinput> to enter rescue mode rather than "
@@ -3885,19 +3886,218 @@ msgstr ""
 "<xref linkend=\"rescue\"/>。"
 
 #. Tag: title
-#: boot-installer.xml:3120
+#: boot-installer.xml:3117
 #, no-c-format
 msgid "Troubleshooting the Installation Process"
 msgstr "安装过程中的故障修复"
 
 #. Tag: title
-#: boot-installer.xml:3125
+#: boot-installer.xml:3122
+#, fuzzy, no-c-format
+msgid "CD-ROM Reliability"
+msgstr "软盘的可靠性"
+
+#. Tag: para
+#: boot-installer.xml:3123
+#, no-c-format
+msgid ""
+"Sometimes, especially with older CD-ROM drives, the installer may fail to "
+"boot from a CD-ROM. The installer may also &mdash; even after booting "
+"successfully from CD-ROM &mdash; fail to recognize the CD-ROM or return "
+"errors while reading from it during the installation."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3130
+#, no-c-format
+msgid ""
+"There are a many different possible causes for these problems. We can only "
+"list some common issues and provide general suggestions on how to deal with "
+"them. The rest is up to you."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3136
+#, no-c-format
+msgid ""
+"If you cannot get the installation working from CD-ROM, try one of the other "
+"installation methods that are available."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3144
+#, no-c-format
+msgid "Common issues"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3147
+#, no-c-format
+msgid ""
+"Some older CD-ROM drives do not support reading from discs that were burned "
+"at high speeds using a modern CD writer."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3153
+#, no-c-format
+msgid ""
+"If your system boots correctly from the CD-ROM, it does not necessarily mean "
+"that Linux also supports the CD-ROM (or, more correctly, the controller that "
+"your CD-ROM drive is connected to)."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3160
+#, no-c-format
+msgid ""
+"Some older CD-ROM drives do not work correctly if <quote>direct memory "
+"access</quote> (DMA) is enabled."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3171
+#, no-c-format
+msgid "How to investigate and maybe solve issues"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3172
+#, no-c-format
+msgid "If the CD-ROM fails to boot, try the suggestions listed below."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3177
+#, no-c-format
+msgid ""
+"Check that your BIOS actually supports booting from CD-ROM (older systems "
+"possibly don't) and that your CD-ROM drive supports the media you are using."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3183
+#, no-c-format
+msgid ""
+"If you downloaded an iso image, check that the md5sum of that image matches "
+"the one listed for the image in the <filename>MD5SUMS</filename> file that "
+"should be present in the same location as where you downloaded the image "
+"from. <informalexample><screen>\n"
+"$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
+"a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-netinst."
+"iso</replaceable>\n"
+"</screen></informalexample> Next, check that the md5sum of the burned CD-ROM "
+"matches as well. The following command should work. It uses the size of the "
+"image to read the correct number of bytes from the CD-ROM."
+msgstr ""
+
+#. Tag: screen
+#: boot-installer.xml:3196
+#, no-c-format
+msgid ""
+"$ dd if=/dev/cdrom | \\\n"
+"> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</"
+"replaceable>` | \\\n"
+"> md5sum\n"
+"a20391b12f7ff22ef705cee4059c6b92  -\n"
+"262668+0 records in\n"
+"262668+0 records out\n"
+"134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3201
+#, no-c-format
+msgid ""
+"If, after the installer has been booted successfully, the CD-ROM is not "
+"detected, sometimes simply trying again may solve the problem. If you have "
+"more than one CD-ROM drive, try changing the CD-ROM to the other drive. If "
+"that does not work or if the CD-ROM is recognized but there are errors when "
+"reading from it, try the suggestions listed below. Some basic knowledge of "
+"Linux is required for this. To execute any of the commands, you should first "
+"switch to the second virtual console (VT2) and activate the shell there."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3213
+#, no-c-format
+msgid ""
+"Switch to VT4 or view the contents of <filename>/var/log/syslog</filename> "
+"(use <command>nano</command> as editor) to check for any specific error "
+"messages. After that, also check the output of <command>dmesg</command>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3220
+#, no-c-format
+msgid ""
+"Check in the output of <command>dmesg</command> if your CD-ROM drive was "
+"recognized. You should see something like (the lines do not necessarily have "
+"to be consecutive): <informalexample><screen>\n"
+"Probing IDE interface ide1...\n"
+"hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
+"ide1 at 0x170-0x177,0x376 on irq 15\n"
+"hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
+"Uniform CD-ROM driver Revision: 3.20\n"
+"</screen></informalexample> If you don't see something like that, chances "
+"are the controller your CD-ROM is connected to was not recognized or may be "
+"not supported at all. If you know what driver is needed for the drive, you "
+"can try loading it manually using <command>modprobe</command>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3234
+#, no-c-format
+msgid ""
+"Check that there is a device node for your CD-ROM drive under <filename>/dev/"
+"</filename>. In the example above, this would be <filename>/dev/hdc</"
+"filename>. There should also be a <filename>/dev/cdroms/cdrom0</filename>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3242
+#, no-c-format
+msgid ""
+"Use the <command>mount</command> command to check if the CD-ROM is already "
+"mounted; if not, try mounting it manually: <informalexample><screen>\n"
+"$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
+"</screen></informalexample> Check if there are any error messages after that "
+"command."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3252
+#, no-c-format
+msgid ""
+"Check if DMA is currently enabled: <informalexample><screen>\n"
+"$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
+"$ grep dma settings\n"
+"using_dma      1       0       1       rw\n"
+"</screen></informalexample> A <quote>1</quote> means it is enabled. If it "
+"is, try disabling it: <informalexample><screen>\n"
+"$ echo -n \"using_dma:0\" >settings\n"
+"</screen></informalexample> Make sure that you are in the directory for the "
+"device that corresponds to your CD-ROM drive."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3266
+#, no-c-format
+msgid ""
+"If there are any problems during the installation, try checking the "
+"integrity of the CD-ROM using the option near the bottom of the installer's "
+"main menu. This option can also be used as a general test if the CD-ROM can "
+"be read reliably."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3281
 #, no-c-format
 msgid "Floppy Disk Reliability"
 msgstr "软盘的可靠性"
 
 #. Tag: para
-#: boot-installer.xml:3127
+#: boot-installer.xml:3283
 #, no-c-format
 msgid ""
 "The biggest problem for people using floppy disks to install Debian seems to "
@@ -3906,7 +4106,7 @@ msgstr ""
 "对于用软盘安装 Debian 的人来说，他们遇到的最大的问题很可能是软盘的可靠性。"
 
 #. Tag: para
-#: boot-installer.xml:3132
+#: boot-installer.xml:3288
 #, no-c-format
 msgid ""
 "The boot floppy is the floppy with the worst problems, because it is read by "
@@ -3922,22 +4122,30 @@ msgstr ""
 "印出很多有关的 I/O 错误。"
 
 #. Tag: para
-#: boot-installer.xml:3141
-#, no-c-format
+#: boot-installer.xml:3297
+#, fuzzy, no-c-format
 msgid ""
 "If you are having the installation stall at a particular floppy, the first "
-"thing you should do is re-download the floppy disk image and write it to a "
-"<emphasis>different</emphasis> floppy. Simply reformatting the old floppy "
-"may not be sufficient, even if it appears that the floppy was reformatted "
-"and written with no errors. It is sometimes useful to try writing the floppy "
-"on a different system."
+"thing you should write it to a <emphasis>different</emphasis> floppy. Simply "
+"reformatting the old floppy may not be sufficient, even if it appears that "
+"the floppy was reformatted and written with no errors. It is sometimes "
+"useful to try writing the floppy on a different system."
 msgstr ""
 "如果您在特定的软盘上陷入麻烦，第一件要做的事情，是重新下载磁盘映像并且把它写"
 "到<emphasis>另外</emphasis>一张软盘上。仅仅只是格式化老的软盘是不够的，有可能"
 "的话甚至要在别的统上重写这些软盘。"
 
 #. Tag: para
-#: boot-installer.xml:3151
+#: boot-installer.xml:3306
+#, no-c-format
+msgid ""
+"Normally you should not have download a floppy image again, but if you are "
+"experiencing problems it is always useful to verify that the images were "
+"downloaded correctly by verifying their md5sums."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3312
 #, no-c-format
 msgid ""
 "One user reports he had to write the images to floppy <emphasis>three</"
@@ -3948,7 +4156,7 @@ msgstr ""
 "软盘才算工作良好。"
 
 #. Tag: para
-#: boot-installer.xml:3157
+#: boot-installer.xml:3318
 #, no-c-format
 msgid ""
 "Other users have reported that simply rebooting a few times with the same "
@@ -3959,13 +4167,13 @@ msgstr ""
 "有缺陷的硬件或固件软盘驱动器驱动程序造成的。"
 
 #. Tag: title
-#: boot-installer.xml:3166
+#: boot-installer.xml:3327
 #, no-c-format
 msgid "Boot Configuration"
 msgstr "引导配置"
 
 #. Tag: para
-#: boot-installer.xml:3168
+#: boot-installer.xml:3329
 #, no-c-format
 msgid ""
 "If you have problems and the kernel hangs during the boot process, doesn't "
@@ -3978,7 +4186,7 @@ msgstr ""
 "\"/> 讨论。"
 
 #. Tag: para
-#: boot-installer.xml:3175
+#: boot-installer.xml:3336
 #, no-c-format
 msgid ""
 "If you are booting with your own kernel instead of the one supplied with the "
@@ -3990,7 +4198,7 @@ msgstr ""
 "<userinput>CONFIG_DEVFS</userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:3182
+#: boot-installer.xml:3343
 #, no-c-format
 msgid ""
 "Often, problems can be solved by removing add-ons and peripherals, and then "
@@ -4001,7 +4209,7 @@ msgstr ""
 "arch=\"x86\">内置调制解调器、声卡以及即插即用设备特别容易引起问题。</phrase>"
 
 #. Tag: para
-#: boot-installer.xml:3188
+#: boot-installer.xml:3349
 #, no-c-format
 msgid ""
 "If you have a large amount of memory installed in your machine, more than "
@@ -4014,13 +4222,13 @@ msgstr ""
 "<userinput>mem=512m</userinput>。"
 
 #. Tag: title
-#: boot-installer.xml:3199
+#: boot-installer.xml:3360
 #, no-c-format
 msgid "Common &arch-title; Installation Problems"
 msgstr "&arch-title; 常见安装问题"
 
 #. Tag: para
-#: boot-installer.xml:3200
+#: boot-installer.xml:3361
 #, no-c-format
 msgid ""
 "There are some common installation problems that can be solved or avoided by "
@@ -4028,7 +4236,7 @@ msgid ""
 msgstr "有一些常见的安装问题，可以通过给安装程序特定的引导参数解决或避免。"
 
 #. Tag: para
-#: boot-installer.xml:3205
+#: boot-installer.xml:3366
 #, no-c-format
 msgid ""
 "Some systems have floppies with <quote>inverted DCLs</quote>. If you receive "
@@ -4039,7 +4247,7 @@ msgstr ""
 "息，并且知道软盘是好的，请尝试 <userinput>floppy=thinkpad</userinput> 参数。"
 
 #. Tag: para
-#: boot-installer.xml:3211
+#: boot-installer.xml:3372
 #, no-c-format
 msgid ""
 "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk "
@@ -4057,7 +4265,7 @@ msgstr ""
 "replaceable>,<replaceable>sectors</replaceable></userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:3220
+#: boot-installer.xml:3381
 #, no-c-format
 msgid ""
 "If you have a very old machine, and the kernel hangs after saying "
@@ -4070,7 +4278,7 @@ msgstr ""
 "userinput> 参数来取消这个测试。"
 
 #. Tag: para
-#: boot-installer.xml:3227
+#: boot-installer.xml:3388
 #, no-c-format
 msgid ""
 "If your screen begins to show a weird picture while the kernel boots, eg. "
@@ -4088,13 +4296,13 @@ msgstr ""
 "能用英语，请参见 <xref linkend=\"boot-parms\"/> 来获得细节信息。"
 
 #. Tag: title
-#: boot-installer.xml:3241
+#: boot-installer.xml:3402
 #, no-c-format
 msgid "System Freeze During the PCMCIA Configuration Phase"
 msgstr "在 PCMCIA 配置阶段系统停止"
 
 #. Tag: para
-#: boot-installer.xml:3242
+#: boot-installer.xml:3403
 #, no-c-format
 msgid ""
 "Some laptop models produced by Dell are known to crash when PCMCIA device "
@@ -4112,7 +4320,7 @@ msgstr ""
 "段。"
 
 #. Tag: para
-#: boot-installer.xml:3252
+#: boot-installer.xml:3413
 #, no-c-format
 msgid ""
 "Alternatively, you can boot the installer in expert mode. You will then be "
@@ -4132,13 +4340,13 @@ msgstr ""
 "装程序中，输入这些值的时候必须忽略逗号。"
 
 #. Tag: title
-#: boot-installer.xml:3269
+#: boot-installer.xml:3430
 #, no-c-format
 msgid "System Freeze while Loading the USB Modules"
 msgstr "在装入 USB 模块时系统停止"
 
 #. Tag: para
-#: boot-installer.xml:3270
+#: boot-installer.xml:3431
 #, no-c-format
 msgid ""
 "The kernel normally tries to install USB modules and the USB keyboard driver "
@@ -4155,13 +4363,13 @@ msgstr ""
 "installer/probe/usb=false</userinput> 参数，这将阻止装入此模块。"
 
 #. Tag: title
-#: boot-installer.xml:3284
+#: boot-installer.xml:3445
 #, no-c-format
 msgid "Interpreting the Kernel Startup Messages"
 msgstr "内核起始信息注解"
 
 #. Tag: para
-#: boot-installer.xml:3286
+#: boot-installer.xml:3447
 #, no-c-format
 msgid ""
 "During the boot sequence, you may see many messages in the form "
@@ -4194,13 +4402,13 @@ msgstr ""
 "linkend=\"kernel-baking\"/>)。"
 
 #. Tag: title
-#: boot-installer.xml:3311
+#: boot-installer.xml:3472
 #, no-c-format
 msgid "Bug Reporter"
 msgstr "Bug Reporter"
 
 #. Tag: para
-#: boot-installer.xml:3312
+#: boot-installer.xml:3473
 #, no-c-format
 msgid ""
 "If you get through the initial boot phase but cannot complete the install, "
@@ -4216,7 +4424,7 @@ msgstr ""
 "可以报告里附上该信息。"
 
 #. Tag: para
-#: boot-installer.xml:3323
+#: boot-installer.xml:3484
 #, no-c-format
 msgid ""
 "Other pertinent installation messages may be found in <filename>/var/log/</"
@@ -4227,13 +4435,13 @@ msgstr ""
 "新安装的系统启动后，放在 <filename>/var/log/debian-installer/</filename> 里。"
 
 #. Tag: title
-#: boot-installer.xml:3334
+#: boot-installer.xml:3495
 #, no-c-format
 msgid "Submitting Installation Reports"
 msgstr "提交缺陷报告"
 
 #. Tag: para
-#: boot-installer.xml:3335
+#: boot-installer.xml:3496
 #, no-c-format
 msgid ""
 "If you still have problems, please submit an installation report. We also "
@@ -4245,7 +4453,7 @@ msgstr ""
 "这让我们可以尽可能多地了解硬件的配置数量。"
 
 #. Tag: para
-#: boot-installer.xml:3342
+#: boot-installer.xml:3503
 #, no-c-format
 msgid ""
 "If you have a working Debian system, the easiest way to send an installation "
@@ -4259,8 +4467,8 @@ msgstr ""
 "installation-report</command> 命令。"
 
 #. Tag: para
-#: boot-installer.xml:3349
-#, no-c-format
+#: boot-installer.xml:3510
+#, fuzzy, no-c-format
 msgid ""
 "Please use this template when filling out installation reports, and file the "
 "report as a bug report against the <classname>installation-reports</"
@@ -4269,7 +4477,7 @@ msgid ""
 "Package: installation-reports\n"
 "\n"
 "Boot method: &lt;How did you boot the installer? CD? floppy? network?&gt;\n"
-"Image version: &lt;Fill in date and from where you got the image&gt;\n"
+"Image version: &lt;Full URL to image you downloaded is best&gt;\n"
 "Date: &lt;Date and time of the install&gt;\n"
 "\n"
 "Machine: &lt;Description of machine (eg, IBM Thinkpad R32)&gt;\n"
@@ -4277,23 +4485,24 @@ msgid ""
 "Memory:\n"
 "Partitions: &lt;df -Tl will do; the raw partition table is preferred&gt;\n"
 "\n"
-"Output of lspci and lspci -n:\n"
+"Output of lspci -nn and lspci -vnn:\n"
 "\n"
 "Base System Installation Checklist:\n"
 "[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n"
 "\n"
-"Initial boot worked:    [ ]\n"
-"Configure network HW:   [ ]\n"
-"Config network:         [ ]\n"
+"Initial boot:           [ ]\n"
+"Detect network card:    [ ]\n"
+"Configure network:      [ ]\n"
 "Detect CD:              [ ]\n"
 "Load installer modules: [ ]\n"
 "Detect hard drives:     [ ]\n"
 "Partition hard drives:  [ ]\n"
-"Create file systems:    [ ]\n"
-"Mount partitions:       [ ]\n"
 "Install base system:    [ ]\n"
+"Clock/timezone setup:   [ ]\n"
+"User/password setup:    [ ]\n"
+"Install tasks:          [ ]\n"
 "Install boot loader:    [ ]\n"
-"Reboot:                 [ ]\n"
+"Overall install:        [ ]\n"
 "\n"
 "Comments/Problems:\n"
 "\n"
diff --git a/po/zh_CN/installation-howto.po b/po/zh_CN/installation-howto.po
index 5f0b306d8..d448c07dd 100644
--- a/po/zh_CN/installation-howto.po
+++ b/po/zh_CN/installation-howto.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-19 11:21+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-10-25 20:50+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -157,7 +157,10 @@ msgid ""
 "If you can't boot from CD, you can download floppy images to install Debian. "
 "You need the <filename>floppy/boot.img</filename>, the <filename>floppy/root."
 "img</filename> and one or more of the driver disks."
-msgstr "如果无法从 CD 启动，可以下载软盘映像文件，来安装 Debian。这时，您需要 <filename>floppy/boot.img</filename> 和 <filename>floppy/root.img</filename>，也许还要一个或多个驱动盘。"
+msgstr ""
+"如果无法从 CD 启动，可以下载软盘映像文件，来安装 Debian。这时，您需要 "
+"<filename>floppy/boot.img</filename> 和 <filename>floppy/root.img</"
+"filename>，也许还要一个或多个驱动盘。"
 
 #. Tag: para
 #: installation-howto.xml:100
@@ -179,7 +182,10 @@ msgid ""
 "<filename>floppy/net-drivers-1.img</filename>. For PCMCIA or USB networking, "
 "and some less common network cards, you will also need a second driver "
 "floppy, <filename>floppy/net-drivers-2.img</filename>."
-msgstr "倘若您计划从网络安装，一般来说，要准备好 <filename>floppy/net-drivers-1.img</filename>。对于 PCMCIA 或 USB 网络，以及一些不常见的网卡，您还需要第二张软盘，<filename>floppy/net-drivers-2.img</filename>。"
+msgstr ""
+"倘若您计划从网络安装，一般来说，要准备好 <filename>floppy/net-drivers-1.img</"
+"filename>。对于 PCMCIA 或 USB 网络，以及一些不常见的网卡，您还需要第二张软"
+"盘，<filename>floppy/net-drivers-2.img</filename>。"
 
 #. Tag: para
 #: installation-howto.xml:113
@@ -352,17 +358,19 @@ msgstr "安装"
 
 #. Tag: para
 #: installation-howto.xml:212
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "Once the installer starts, you will be greeted with an initial screen. Press "
 "&enterkey; to boot, or read the instructions for other boot methods and "
-"parameters (see <xref linkend=\"boot-parms\"/>). <phrase arch=\"i386\"> If "
-"you want a 2.4 kernel, type <userinput>install24</userinput> at the "
-"<prompt>boot:</prompt> prompt. The 2.6 kernel is the default. </phrase>"
-msgstr "一旦安装程序运行，会有一个初始画面迎接您。按 &enterkey; 启动系统；或者先阅读一下其它的启动方式以及各种参数的说明(参阅 <xref linkend=\"boot-parms\"/>)。<phrase arch=\"i386\"> 如果您打算使用 2.4 的内核，在 <prompt>boot:</prompt> 提示符之后键入 <userinput>install24</userinput>。默认使用 2.6 内核。</phrase>"
+"parameters (see <xref linkend=\"boot-parms\"/>)."
+msgstr ""
+"一旦安装程序运行，会有一个初始画面迎接您。按 &enterkey; 启动系统；或者先阅读"
+"一下其它的启动方式以及各种参数的说明(参阅 <xref linkend=\"boot-parms\"/>)。"
+"<phrase arch=\"i386\"> 如果您打算使用 2.4 的内核，在 <prompt>boot:</prompt> "
+"提示符之后键入 <userinput>install24</userinput>。默认使用 2.6 内核。</phrase>"
 
 #. Tag: para
-#: installation-howto.xml:222
+#: installation-howto.xml:218
 #, no-c-format
 msgid ""
 "After a while you will be asked to select your language. Use the arrow keys "
@@ -377,7 +385,7 @@ msgstr ""
 "上所有国家的列表以备选择。"
 
 #. Tag: para
-#: installation-howto.xml:230
+#: installation-howto.xml:226
 #, no-c-format
 msgid ""
 "You may be asked to confirm your keyboard layout. Choose the default unless "
@@ -387,7 +395,7 @@ msgstr ""
 "清楚更合适的布局。"
 
 #. Tag: para
-#: installation-howto.xml:235
+#: installation-howto.xml:231
 #, no-c-format
 msgid ""
 "Now sit back while debian-installer detects some of your hardware, and loads "
@@ -397,7 +405,7 @@ msgstr ""
 "件，并从 CD、软驱、USB 或其它设备里把它的其余部分加载进系统。"
 
 #. Tag: para
-#: installation-howto.xml:240
+#: installation-howto.xml:236
 #, no-c-format
 msgid ""
 "Next the installer will try to detect your network hardware and set up "
@@ -408,7 +416,7 @@ msgstr ""
 "果您没有连接网络，或是没有用 DHCP，那么您也可以手动配置网络。"
 
 #. Tag: para
-#: installation-howto.xml:246
+#: installation-howto.xml:242
 #, no-c-format
 msgid ""
 "Now it is time to partition your disks. First you will be given the "
@@ -422,7 +430,7 @@ msgstr ""
 "区，请在菜单中选择 <guimenuitem>Manual</guimenuitem>。"
 
 #. Tag: para
-#: installation-howto.xml:254
+#: installation-howto.xml:250
 #, no-c-format
 msgid ""
 "If you have an existing DOS or Windows partition that you want to preserve, "
@@ -436,7 +444,7 @@ msgstr ""
 "装空间：只需选择该分区，并指定它的新尺寸。"
 
 #. Tag: para
-#: installation-howto.xml:261
+#: installation-howto.xml:257
 #, no-c-format
 msgid ""
 "On the next screen you will see your partition table, how the partitions "
@@ -456,7 +464,7 @@ msgstr ""
 "\"partitioning\"/> 有更多关于分区方面的信息。"
 
 #. Tag: para
-#: installation-howto.xml:271
+#: installation-howto.xml:267
 #, no-c-format
 msgid ""
 "Now &d-i; formats your partitions and starts to install the base system, "
@@ -466,7 +474,7 @@ msgstr ""
 "装内核。"
 
 #. Tag: para
-#: installation-howto.xml:276
+#: installation-howto.xml:272
 #, no-c-format
 msgid ""
 "The last step is to install a boot loader. If the installer detects other "
@@ -482,7 +490,7 @@ msgstr ""
 "它这样做，而是把 GRUB 装在其它什么地方。</phrase>"
 
 #. Tag: para
-#: installation-howto.xml:286
+#: installation-howto.xml:282
 #, no-c-format
 msgid ""
 "&d-i; will now tell you that the installation has finished. Remove the cdrom "
@@ -495,7 +503,7 @@ msgstr ""
 "个阶段，在 <xref linkend=\"boot-new\"/> 有对它的详尽说明。"
 
 #. Tag: para
-#: installation-howto.xml:293
+#: installation-howto.xml:289
 #, no-c-format
 msgid ""
 "If you need more information on the install process, see <xref linkend=\"d-i-"
@@ -503,13 +511,13 @@ msgid ""
 msgstr "如果您想要更多的安装过程相关信息，请看 <xref linkend=\"d-i-intro\"/>。"
 
 #. Tag: title
-#: installation-howto.xml:302
+#: installation-howto.xml:298
 #, no-c-format
 msgid "Send us an installation report"
 msgstr "请给我们发一份安装报告"
 
 #. Tag: para
-#: installation-howto.xml:303
+#: installation-howto.xml:299
 #, no-c-format
 msgid ""
 "If you successfully managed an installation with &d-i;, please take time to "
@@ -522,7 +530,7 @@ msgstr ""
 "<command>reportbug installation-report</command>。"
 
 #. Tag: para
-#: installation-howto.xml:311
+#: installation-howto.xml:307
 #, no-c-format
 msgid ""
 "If you did not complete the install, you probably found a bug in debian-"
@@ -537,13 +545,13 @@ msgstr ""
 "\"problem-report\"/>。"
 
 #. Tag: title
-#: installation-howto.xml:323
+#: installation-howto.xml:319
 #, no-c-format
 msgid "And finally.."
 msgstr "末了……"
 
 #. Tag: para
-#: installation-howto.xml:324
+#: installation-howto.xml:320
 #, no-c-format
 msgid ""
 "We hope that your Debian installation is pleasant and that you find Debian "
diff --git a/po/zh_CN/partitioning.po b/po/zh_CN/partitioning.po
index 56bb59774..12a309bfb 100644
--- a/po/zh_CN/partitioning.po
+++ b/po/zh_CN/partitioning.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-26 16:20+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-09-04 10:27+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -979,47 +979,11 @@ msgstr ""
 #. Tag: para
 #: partitioning.xml:582
 #, no-c-format
-msgid ""
-"If you will be working with more than 20 partitions on your ide disk, you "
-"will need to create devices for partitions 21 and beyond. The next step of "
-"initializing the partition will fail unless a proper device is present. As "
-"an example, here are commands you can use in <userinput>tty2</userinput> or "
-"under <guimenuitem>Execute a shell</guimenuitem> to add a device so the 21st "
-"partition can be initialized: <informalexample><screen>\n"
-"# cd /dev\n"
-"# mknod hda21 b 3 21\n"
-"# chgrp disk hda21\n"
-"# chmod 660 hda21\n"
-"</screen></informalexample> Booting into the new system will fail unless "
-"proper devices are present on the target system. After installing the kernel "
-"and modules, execute: <informalexample><screen>\n"
-"# cd /target/dev\n"
-"# mknod hda21 b 3 21\n"
-"# chgrp disk hda21\n"
-"# chmod 660 hda21\n"
-"</screen></informalexample> <phrase arch=\"x86\">Remember to mark your boot "
-"partition as <quote>Bootable</quote>.</phrase>"
-msgstr ""
-"如果您的 ide 磁盘上超过 20 个分区，您将需要为 21 以上的分区创建设备。除非有正"
-"确的设备存在，否则下一步初始化分区将失败。作为一个例子，这里列举了相关的命"
-"令，让您可以在 <userinput>tty2</userinput> 中使用或者在<guimenuitem>运行一个 "
-"shell</guimenuitem>下加入一个设备文件，令第 21 个的分区能够被初始化："
-"<informalexample><screen>\n"
-"# cd /dev\n"
-"# mknod hda21 b 3 21 \n"
-"# chgrp disk hda21\n"
-"# chmod 660 hda21\n"
-"</screen></informalexample> 除非在目标系统上有合适的设备名称，否则引导一个新"
-"的系统将会失败。在安装完内核和模块以后，执行： <informalexample><screen>\n"
-"# cd /target/dev\n"
-"# mknod hda21 b 3 21 \n"
-"# chgrp disk hda21\n"
-"# chmod 660 hda21\n"
-"</screen></informalexample> <phrase arch=\"x86\">记住标记您的引导分区为 "
-"<quote>Bootable</quote>。</phrase>"
+msgid "Remember to mark your boot partition as <quote>Bootable</quote>."
+msgstr ""
 
 #. Tag: para
-#: partitioning.xml:601
+#: partitioning.xml:585
 #, no-c-format
 msgid ""
 "One key point when partitioning for Mac type disks is that the swap "
@@ -1036,14 +1000,14 @@ msgstr ""
 
 # index.docbook:612, index.docbook:672, index.docbook:696, index.docbook:793, index.docbook:912, index.docbook:989
 #. Tag: title
-#: partitioning.xml:617 partitioning.xml:678 partitioning.xml:702
-#: partitioning.xml:799 partitioning.xml:913 partitioning.xml:990
+#: partitioning.xml:601 partitioning.xml:662 partitioning.xml:686
+#: partitioning.xml:783 partitioning.xml:897 partitioning.xml:974
 #, no-c-format
 msgid "Partitioning for &arch-title;"
 msgstr "为 &arch-title; 准备分区"
 
 #. Tag: para
-#: partitioning.xml:618
+#: partitioning.xml:602
 #, no-c-format
 msgid ""
 "Booting Debian from the SRM console (the only disk boot method supported by "
@@ -1062,7 +1026,7 @@ msgstr ""
 "存在一个 DOS 分区表，在 partman 转换到 disk label 前需要将它删除。"
 
 #. Tag: para
-#: partitioning.xml:629
+#: partitioning.xml:613
 #, no-c-format
 msgid ""
 "If you have chosen to use <command>fdisk</command> to partition your disk, "
@@ -1074,7 +1038,7 @@ msgstr ""
 "磁盘卷标，您必须使用<quote>b</quote>命令进入磁盘卷标模式。"
 
 #. Tag: para
-#: partitioning.xml:636
+#: partitioning.xml:620
 #, no-c-format
 msgid ""
 "Unless you wish to use the disk you are partitioning from Tru64 Unix or one "
@@ -1093,7 +1057,7 @@ msgstr ""
 "系统访问。"
 
 #. Tag: para
-#: partitioning.xml:648
+#: partitioning.xml:632
 #, no-c-format
 msgid ""
 "Also, because <command>aboot</command> is written to the first few sectors "
@@ -1114,7 +1078,7 @@ msgstr ""
 "这是习惯所致。"
 
 #. Tag: para
-#: partitioning.xml:660
+#: partitioning.xml:644
 #, no-c-format
 msgid ""
 "For ARC installations, you should make a small FAT partition at the "
@@ -1132,7 +1096,7 @@ msgstr ""
 "<command>mkdosfs</command> 然后再尝试安装启动引导器。"
 
 #. Tag: para
-#: partitioning.xml:679
+#: partitioning.xml:663
 #, no-c-format
 msgid ""
 "PALO, the HPPA boot loader, requires a partition of type <quote>F0</quote> "
@@ -1158,7 +1122,7 @@ msgstr ""
 "25&ndash;50 MB 一般来说应该足够了。"
 
 #. Tag: para
-#: partitioning.xml:703
+#: partitioning.xml:687
 #, fuzzy, no-c-format
 msgid ""
 "If you have an existing other operating system such as DOS or Windows and "
@@ -1176,7 +1140,7 @@ msgstr ""
 "分区，并更改其尺寸。"
 
 #. Tag: para
-#: partitioning.xml:713
+#: partitioning.xml:697
 #, no-c-format
 msgid ""
 "The PC BIOS generally adds additional constraints for disk partitioning. "
@@ -1196,7 +1160,7 @@ msgstr ""
 "包含一个简单的介绍，来帮助在大部分情况下进行规划。"
 
 #. Tag: para
-#: partitioning.xml:724
+#: partitioning.xml:708
 #, no-c-format
 msgid ""
 "<quote>Primary</quote> partitions are the original partitioning scheme for "
@@ -1214,7 +1178,7 @@ msgstr ""
 "盘您只能含有一个扩展分区。"
 
 #. Tag: para
-#: partitioning.xml:735
+#: partitioning.xml:719
 #, no-c-format
 msgid ""
 "Linux limits the partitions per drive to 15 partitions for SCSI disks (3 "
@@ -1230,7 +1194,7 @@ msgstr ""
 "超过 20 个的分区，除非您为这些首先手工创建了设备文件。"
 
 #. Tag: para
-#: partitioning.xml:745
+#: partitioning.xml:729
 #, no-c-format
 msgid ""
 "If you have a large IDE disk, and are using neither LBA addressing, nor "
@@ -1244,7 +1208,7 @@ msgstr ""
 "个 1024 柱面内。(在没有 BIOS 转换的情况下，大约有 524MB)。"
 
 #. Tag: para
-#: partitioning.xml:753
+#: partitioning.xml:737
 #, no-c-format
 msgid ""
 "This restriction doesn't apply if you have a BIOS newer than around "
@@ -1268,7 +1232,7 @@ msgstr ""
 "来进行磁盘寻址。"
 
 #. Tag: para
-#: partitioning.xml:767
+#: partitioning.xml:751
 #, no-c-format
 msgid ""
 "If you have a large disk, you might have to use cylinder translation "
@@ -1288,7 +1252,7 @@ msgstr ""
 "换后</emphasis> 的 1024 柱面内。"
 
 #. Tag: para
-#: partitioning.xml:779
+#: partitioning.xml:763
 #, no-c-format
 msgid ""
 "The recommended way of accomplishing this is to create a small "
@@ -1308,7 +1272,7 @@ msgstr ""
 "用，甚至也不管您的 BIOS 是否支持大硬盘访问扩展。"
 
 #. Tag: para
-#: partitioning.xml:800
+#: partitioning.xml:784
 #, no-c-format
 msgid ""
 "The <command>partman</command> disk partitioner is the default partitioning "
@@ -1322,13 +1286,13 @@ msgstr ""
 "<command>parted</command> 来进行磁盘分区的。"
 
 #. Tag: title
-#: partitioning.xml:812
+#: partitioning.xml:796
 #, no-c-format
 msgid "EFI Recognized Formats"
 msgstr "EFI 能够识别的格式"
 
 #. Tag: para
-#: partitioning.xml:813
+#: partitioning.xml:797
 #, no-c-format
 msgid ""
 "The IA64 EFI firmware supports two partition table (or disk label) formats, "
@@ -1345,7 +1309,7 @@ msgstr ""
 "DOS 分区表。"
 
 #. Tag: para
-#: partitioning.xml:825
+#: partitioning.xml:809
 #, no-c-format
 msgid ""
 "The automatic partitioning recipes for <command>partman</command> allocate "
@@ -1359,7 +1323,7 @@ msgstr ""
 "配置分区。其方法类似设置一个 <emphasis>交换</emphasis> 分区。"
 
 #. Tag: para
-#: partitioning.xml:833
+#: partitioning.xml:817
 #, no-c-format
 msgid ""
 "The <command>partman</command> partitioner will handle most disk layouts. "
@@ -1404,13 +1368,13 @@ msgstr ""
 "它可能要扫描坏区。"
 
 #. Tag: title
-#: partitioning.xml:858
+#: partitioning.xml:842
 #, no-c-format
 msgid "Boot Loader Partition Requirements"
 msgstr "启动引导器分区要求"
 
 #. Tag: para
-#: partitioning.xml:859
+#: partitioning.xml:843
 #, no-c-format
 msgid ""
 "ELILO, the ia64 boot loader, requires a partition containing a FAT file "
@@ -1425,7 +1389,7 @@ msgstr ""
 "个内核的话，128MB 也许更好。"
 
 #. Tag: para
-#: partitioning.xml:868
+#: partitioning.xml:852
 #, no-c-format
 msgid ""
 "The EFI Boot Manager and the EFI Shell fully support the GPT table so the "
@@ -1447,7 +1411,7 @@ msgstr ""
 "入一个 EFI 分区。"
 
 #. Tag: para
-#: partitioning.xml:883
+#: partitioning.xml:867
 #, no-c-format
 msgid ""
 "It is strongly recommended that you allocate the EFI boot partition on the "
@@ -1457,13 +1421,13 @@ msgstr ""
 "盘上。"
 
 #. Tag: title
-#: partitioning.xml:891
+#: partitioning.xml:875
 #, no-c-format
 msgid "EFI Diagnostic Partitions"
 msgstr "EFI 诊断分区"
 
 #. Tag: para
-#: partitioning.xml:892
+#: partitioning.xml:876
 #, no-c-format
 msgid ""
 "The EFI firmware is significantly more sophisticated than the usual BIOS "
@@ -1482,7 +1446,7 @@ msgstr ""
 "区的时候。"
 
 #. Tag: para
-#: partitioning.xml:914
+#: partitioning.xml:898
 #, no-c-format
 msgid ""
 "SGI machines require an SGI disk label in order to make the system bootable "
@@ -1498,13 +1462,13 @@ msgstr ""
 "入。注意 volume header 必须从 0 号扇区开始。"
 
 #. Tag: title
-#: partitioning.xml:931
+#: partitioning.xml:915
 #, no-c-format
 msgid "Partitioning Newer PowerMacs"
 msgstr "为较新的 PowerMacs 分区"
 
 #. Tag: para
-#: partitioning.xml:932
+#: partitioning.xml:916
 #, no-c-format
 msgid ""
 "If you are installing onto a NewWorld PowerMac you must create a special "
@@ -1526,7 +1490,7 @@ msgstr ""
 "userinput> 命令。"
 
 #. Tag: para
-#: partitioning.xml:945
+#: partitioning.xml:929
 #, no-c-format
 msgid ""
 "The special partition type Apple_Bootstrap is required to prevent MacOS from "
@@ -1537,7 +1501,7 @@ msgstr ""
 "为里面 含有一些特殊修改的模式来让 OpenFirmware 能够自动启动它。"
 
 #. Tag: para
-#: partitioning.xml:952
+#: partitioning.xml:936
 #, no-c-format
 msgid ""
 "Note that the bootstrap partition is only meant to hold 3 very small files: "
@@ -1554,7 +1518,7 @@ msgstr ""
 "command> 工具可以用来维护这个分区。"
 
 #. Tag: para
-#: partitioning.xml:962
+#: partitioning.xml:946
 #, no-c-format
 msgid ""
 "In order for OpenFirmware to automatically boot &debian; the bootstrap "
@@ -1574,7 +1538,7 @@ msgstr ""
 "顺序。"
 
 #. Tag: para
-#: partitioning.xml:974
+#: partitioning.xml:958
 #, no-c-format
 msgid ""
 "Apple disks normally have several small driver partitions. If you intend to "
@@ -1588,7 +1552,7 @@ msgstr ""
 "启动的时候，会初始化没有任何激活的 MacOS 分区以及驱动分区的磁盘。"
 
 #. Tag: para
-#: partitioning.xml:991
+#: partitioning.xml:975
 #, no-c-format
 msgid ""
 "Make sure you create a <quote>Sun disk label</quote> on your boot disk. This "
@@ -1601,7 +1565,7 @@ msgstr ""
 "<keycap>s</keycap> 中用 <command>fdisk</command> 键来创建 Sun 磁盘标记。"
 
 #. Tag: para
-#: partitioning.xml:999
+#: partitioning.xml:983
 #, no-c-format
 msgid ""
 "Furthermore, on &arch-title; disks, make sure your first partition on your "
@@ -1620,7 +1584,7 @@ msgstr ""
 "或者 UFS 分区在那里；它们将隔离分区表和引导块。"
 
 #. Tag: para
-#: partitioning.xml:1010
+#: partitioning.xml:994
 #, no-c-format
 msgid ""
 "It is also advised that the third partition should be of type <quote>Whole "
@@ -1631,3 +1595,44 @@ msgstr ""
 "这里建议第三个分区应该是 <quote>Whole disk</quote>(type 5)，并且包含整个磁盘 "
 "(从第一个柱面至最后一个)，这是 Sun 磁盘格式的惯例，并且确保 <command>SILO</"
 "command> 启动引导器工作良好。"
+
+#~ msgid ""
+#~ "If you will be working with more than 20 partitions on your ide disk, you "
+#~ "will need to create devices for partitions 21 and beyond. The next step "
+#~ "of initializing the partition will fail unless a proper device is "
+#~ "present. As an example, here are commands you can use in <userinput>tty2</"
+#~ "userinput> or under <guimenuitem>Execute a shell</guimenuitem> to add a "
+#~ "device so the 21st partition can be initialized: "
+#~ "<informalexample><screen>\n"
+#~ "# cd /dev\n"
+#~ "# mknod hda21 b 3 21\n"
+#~ "# chgrp disk hda21\n"
+#~ "# chmod 660 hda21\n"
+#~ "</screen></informalexample> Booting into the new system will fail unless "
+#~ "proper devices are present on the target system. After installing the "
+#~ "kernel and modules, execute: <informalexample><screen>\n"
+#~ "# cd /target/dev\n"
+#~ "# mknod hda21 b 3 21\n"
+#~ "# chgrp disk hda21\n"
+#~ "# chmod 660 hda21\n"
+#~ "</screen></informalexample> <phrase arch=\"x86\">Remember to mark your "
+#~ "boot partition as <quote>Bootable</quote>.</phrase>"
+#~ msgstr ""
+#~ "如果您的 ide 磁盘上超过 20 个分区，您将需要为 21 以上的分区创建设备。除非"
+#~ "有正确的设备存在，否则下一步初始化分区将失败。作为一个例子，这里列举了相关"
+#~ "的命令，让您可以在 <userinput>tty2</userinput> 中使用或者在<guimenuitem>运"
+#~ "行一个 shell</guimenuitem>下加入一个设备文件，令第 21 个的分区能够被初始"
+#~ "化：<informalexample><screen>\n"
+#~ "# cd /dev\n"
+#~ "# mknod hda21 b 3 21 \n"
+#~ "# chgrp disk hda21\n"
+#~ "# chmod 660 hda21\n"
+#~ "</screen></informalexample> 除非在目标系统上有合适的设备名称，否则引导一个"
+#~ "新的系统将会失败。在安装完内核和模块以后，执行： "
+#~ "<informalexample><screen>\n"
+#~ "# cd /target/dev\n"
+#~ "# mknod hda21 b 3 21 \n"
+#~ "# chgrp disk hda21\n"
+#~ "# chmod 660 hda21\n"
+#~ "</screen></informalexample> <phrase arch=\"x86\">记住标记您的引导分区为 "
+#~ "<quote>Bootable</quote>。</phrase>"
diff --git a/po/zh_CN/preseed.po b/po/zh_CN/preseed.po
index e47984cd5..03cbbd5f4 100644
--- a/po/zh_CN/preseed.po
+++ b/po/zh_CN/preseed.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-26 16:19+0000\n"
+"POT-Creation-Date: 2006-10-29 14:48+0000\n"
 "PO-Revision-Date: 2006-10-16 15:44+0800\n"
 "Last-Translator: Ji YongGang <jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@debian.org>\n"
@@ -26,7 +26,7 @@ msgid ""
 msgstr "本附录对 &d-i; 中提问对应的答案进行说明，让安装过程自动化。"
 
 #. Tag: para
-#: preseed.xml:23 preseed.xml:504
+#: preseed.xml:23 preseed.xml:508
 #, no-c-format
 msgid ""
 "The configuration fragments used in this appendix are also available as an "
@@ -542,33 +542,38 @@ msgstr ""
 
 #. Tag: para
 #: preseed.xml:374
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "A <quote>--</quote> in the boot options has special meaning. Kernel "
-"parameters that appear after it will be copied into the installed bootloader "
-"configuration (if supported by the installer for the bootloader). Note that "
-"the <quote>--</quote> may already be present in the default boot parameters."
+"parameters that appear after the last <quote>--</quote> will be copied into "
+"the installed bootloader configuration (if supported by the installer for "
+"the bootloader). Note that the <quote>--</quote> may already be present in "
+"the default boot parameters, which means that unless you add another "
+"<quote>--</quote> all parameters specified at the boot prompt will be "
+"copied. That being the case, you should specify any preconfiguration options "
+"before any options required by the hardware in order to boot, and separate "
+"them with a <quote>--</quote> to ensure that only the latter are copied onto "
+"the target system."
 msgstr ""
 "<quote>--</quote> 在启动选项中有特殊含义。之后的内核参数将复制到已安装的引导"
 "器配置(假如安装程序支持引导器)。注意 <quote>--</quote> 也可能已经存在于默认的"
 "引导参数中。"
 
 #. Tag: para
-#: preseed.xml:383
-#, no-c-format
+#: preseed.xml:388
+#, fuzzy, no-c-format
 msgid ""
-"The 2.4 kernel accepts a maximum of 8 command line options and 8 environment "
-"options (including any options added by default for the installer). If these "
-"numbers are exceeded, 2.4 kernels will drop any excess options and 2.6 "
-"kernels will panic. For kernel 2.6.9 and later, you can use 32 command line "
-"options and 32 environment options."
+"Current linux kernels (2.6.9 and later) accept a maximum of 32 command line "
+"options and 32 environment options, including any options added by default "
+"for the installer. If these numbers are exceeded, the kernel will panic "
+"(crash). (For earlier kernels, these numbers were lower.)"
 msgstr ""
 "对于 2.4 内核，它最多可以接受 8 个命令行选项和 8 个环境变量选项(包括安装程序"
 "使用的默认选项)。如果超出，2.4 内核将丢弃多余部分，但 2.6 内核会崩溃。2.6.9 "
 "以后的内核，您可以指定 32 个命令行选项和 32 个环境变量选项。"
 
 #. Tag: para
-#: preseed.xml:392
+#: preseed.xml:396
 #, no-c-format
 msgid ""
 "For most installations some of the default options in your bootloader "
@@ -579,7 +584,7 @@ msgstr ""
 "literal>，可以放心地删除，这让您可以添加更多的预置选项。"
 
 #. Tag: para
-#: preseed.xml:399
+#: preseed.xml:403
 #, no-c-format
 msgid ""
 "It may not always be possible to specify values with spaces for boot "
@@ -587,13 +592,13 @@ msgid ""
 msgstr "引导参数中即使使用引号，也可能无法夹杂空格。"
 
 #. Tag: title
-#: preseed.xml:409
+#: preseed.xml:413
 #, no-c-format
 msgid "Creating a preconfiguration file"
 msgstr "创建预置文件"
 
 #. Tag: para
-#: preseed.xml:410
+#: preseed.xml:414
 #, no-c-format
 msgid ""
 "The preconfiguration file is in the format used by the <command>debconf-set-"
@@ -604,21 +609,21 @@ msgstr ""
 "预置文件中每一行的格式为："
 
 #. Tag: screen
-#: preseed.xml:416
+#: preseed.xml:420
 #, no-c-format
 msgid "&lt;owner&gt; &lt;question name&gt; &lt;question type&gt; &lt;value&gt;"
 msgstr ""
 "&lt;owner&gt; &lt;question name&gt; &lt;question type&gt; &lt;value&gt;"
 
 #. Tag: para
-#: preseed.xml:418
+#: preseed.xml:422
 #, no-c-format
 msgid ""
 "There are a few rules to keep in mind when writing a preconfiguration file."
 msgstr "编写预置文件的时候要留意几条规则。"
 
 #. Tag: para
-#: preseed.xml:425
+#: preseed.xml:429
 #, no-c-format
 msgid ""
 "Put only a single space or tab between type and value: any additional "
@@ -627,7 +632,7 @@ msgstr ""
 "在类型和值之间只有一个空格或者 tab：任何额外的空格将被解释为值的一部分。"
 
 #. Tag: para
-#: preseed.xml:429
+#: preseed.xml:433
 #, no-c-format
 msgid ""
 "A line can be split into multiple lines by appending a backslash "
@@ -639,7 +644,7 @@ msgstr ""
 "行。分割一行较好的地方是在问题名后面；而在类型和值之间则是糟糕的地方。"
 
 #. Tag: para
-#: preseed.xml:435
+#: preseed.xml:439
 #, no-c-format
 msgid ""
 "Most questions need to be preseeded using the values valid in English and "
@@ -650,7 +655,7 @@ msgstr ""
 "<classname>partman</classname>)，需要使用翻译过的值。"
 
 #. Tag: para
-#: preseed.xml:441
+#: preseed.xml:445
 #, no-c-format
 msgid ""
 "Some questions take a code as value instead of the English text that is "
@@ -658,7 +663,7 @@ msgid ""
 msgstr "有些问题在安装过程中显示值的代码而不是英文文本。"
 
 #. Tag: para
-#: preseed.xml:447
+#: preseed.xml:451
 #, no-c-format
 msgid ""
 "The easiest way to create a preconfiguration file is to use the example file "
@@ -668,7 +673,7 @@ msgstr ""
 "\"preseed-contents\"/>。"
 
 #. Tag: para
-#: preseed.xml:452
+#: preseed.xml:456
 #, no-c-format
 msgid ""
 "An alternative method is to do a manual installation and then, after "
@@ -681,7 +686,7 @@ msgstr ""
 "程序的 cdebconf 数据库到一个文件："
 
 #. Tag: screen
-#: preseed.xml:459
+#: preseed.xml:463
 #, no-c-format
 msgid ""
 "$ debconf-get-selections --installer &gt; <replaceable>file</replaceable>\n"
@@ -691,7 +696,7 @@ msgstr ""
 "$ debconf-get-selections &gt;&gt; <replaceable>file</replaceable>"
 
 #. Tag: para
-#: preseed.xml:461
+#: preseed.xml:465
 #, no-c-format
 msgid ""
 "However, a file generated in this manner will have some items that should "
@@ -702,7 +707,7 @@ msgstr ""
 "始。"
 
 #. Tag: para
-#: preseed.xml:469
+#: preseed.xml:473
 #, no-c-format
 msgid ""
 "This method relies on the fact that, at the end of the installation, the "
@@ -716,7 +721,7 @@ msgstr ""
 "感的信息，默认只为 root 可读。"
 
 #. Tag: para
-#: preseed.xml:477
+#: preseed.xml:481
 #, no-c-format
 msgid ""
 "The directory <filename>/var/log/installer</filename> and all files in it "
@@ -727,7 +732,7 @@ msgstr ""
 "log/installer</filename> 目录及其中的文件将从您的系统中删除。"
 
 #. Tag: para
-#: preseed.xml:485
+#: preseed.xml:489
 #, no-c-format
 msgid ""
 "To check possible values for questions, you can use <command>nano</command> "
@@ -742,7 +747,7 @@ msgstr ""
 "值。"
 
 #. Tag: para
-#: preseed.xml:493
+#: preseed.xml:497
 #, no-c-format
 msgid ""
 "To check if the format of your preconfiguration file is valid before "
@@ -753,13 +758,13 @@ msgstr ""
 "selections -c <replaceable>preseed.cfg</replaceable></command> 命令。"
 
 #. Tag: title
-#: preseed.xml:503
+#: preseed.xml:507
 #, no-c-format
 msgid "Contents of the preconfiguration file"
 msgstr "预置文件的内容"
 
 #. Tag: para
-#: preseed.xml:509
+#: preseed.xml:513
 #, no-c-format
 msgid ""
 "Note that this example is based on an installation for the Intel x86 "
@@ -773,13 +778,13 @@ msgstr ""
 "设置替换。"
 
 #. Tag: title
-#: preseed.xml:520
+#: preseed.xml:524
 #, no-c-format
 msgid "Localization"
 msgstr "本地化"
 
 #. Tag: para
-#: preseed.xml:521
+#: preseed.xml:525
 #, no-c-format
 msgid ""
 "Setting localization values will only work if you are using initrd "
@@ -789,7 +794,7 @@ msgstr ""
 "设置本地信息只适用于使用 initrd 预置。其他方式下这些问题是在询问之后加载的。"
 
 #. Tag: para
-#: preseed.xml:527
+#: preseed.xml:531
 #, no-c-format
 msgid ""
 "The locale can be used to specify both language and country. To specify the "
@@ -800,7 +805,7 @@ msgstr ""
 "<userinput>locale=<replaceable>en_US</replaceable></userinput>。"
 
 #. Tag: screen
-#: preseed.xml:533
+#: preseed.xml:537
 #, no-c-format
 msgid ""
 "# Locale sets language and country.\n"
@@ -810,7 +815,7 @@ msgstr ""
 "d-i debian-installer/locale string en_US"
 
 #. Tag: para
-#: preseed.xml:535
+#: preseed.xml:539
 #, no-c-format
 msgid ""
 "Keyboard configuration consists of selecting a keyboard architecture and a "
@@ -822,7 +827,7 @@ msgstr ""
 "体系，因此通常不必预置。键映射必须对所选择的键盘体系有效。"
 
 #. Tag: screen
-#: preseed.xml:542
+#: preseed.xml:546
 #, no-c-format
 msgid ""
 "# Keyboard selection.\n"
@@ -838,7 +843,7 @@ msgstr ""
 "#d-i console-keymaps-usb/keymap select mac-usb-us"
 
 #. Tag: para
-#: preseed.xml:544
+#: preseed.xml:548
 #, no-c-format
 msgid ""
 "To skip keyboard configuration, preseed <classname>console-tools/archs</"
@@ -849,7 +854,7 @@ msgstr ""
 "tools/archs</classname>。这将导致内核键映射保持活动。"
 
 #. Tag: para
-#: preseed.xml:553
+#: preseed.xml:557
 #, no-c-format
 msgid ""
 "The changes in the input layer for 2.6 kernels have made the keyboard "
@@ -860,13 +865,13 @@ msgstr ""
 "<quote>PC</quote> (<userinput>at</userinput>) keymap。"
 
 #. Tag: title
-#: preseed.xml:563
+#: preseed.xml:567
 #, no-c-format
 msgid "Network configuration"
 msgstr "网络设置"
 
 #. Tag: para
-#: preseed.xml:564
+#: preseed.xml:568
 #, no-c-format
 msgid ""
 "Of course, preseeding the network configuration won't work if you're loading "
@@ -879,7 +884,7 @@ msgstr ""
 "助。如果您计划从网络加载预置文件，应该使用传递网络设置给内核引导参数的方式。"
 
 #. Tag: para
-#: preseed.xml:572
+#: preseed.xml:576
 #, no-c-format
 msgid ""
 "If you need to pick a particular interface when netbooting before loading a "
@@ -890,7 +895,7 @@ msgstr ""
 "<userinput>interface=<replaceable>eth1</replaceable></userinput>。"
 
 #. Tag: para
-#: preseed.xml:578
+#: preseed.xml:582
 #, no-c-format
 msgid ""
 "Although preseeding the network configuration is normally not possible when "
@@ -906,7 +911,7 @@ msgstr ""
 "再运行一次，这需要下面的内容包含在 <quote>preseed/run</quote> 脚本里面："
 
 #. Tag: screen
-#: preseed.xml:588
+#: preseed.xml:592
 #, no-c-format
 msgid ""
 "killall.sh dhclient\n"
@@ -916,7 +921,7 @@ msgstr ""
 "netcfg"
 
 #. Tag: screen
-#: preseed.xml:592
+#: preseed.xml:596
 #, no-c-format
 msgid ""
 "# netcfg will choose an interface that has link if possible. This makes it\n"
@@ -998,13 +1003,13 @@ msgstr ""
 "#d-i netcfg/dhcp_hostname string radish"
 
 #. Tag: title
-#: preseed.xml:597
+#: preseed.xml:601
 #, no-c-format
 msgid "Mirror settings"
 msgstr "镜像设置"
 
 #. Tag: para
-#: preseed.xml:598
+#: preseed.xml:602
 #, no-c-format
 msgid ""
 "Depending on the installation method you use, a mirror may be used both to "
@@ -1015,7 +1020,7 @@ msgstr ""
 "系统建立 <filename>/etc/apt/sources.list</filename>。"
 
 #. Tag: para
-#: preseed.xml:605
+#: preseed.xml:609
 #, no-c-format
 msgid ""
 "The parameter <classname>mirror/suite</classname> determines the suite for "
@@ -1024,7 +1029,7 @@ msgstr ""
 "参数 <classname>mirror/suite</classname> 决定了安装好的系统使用的套件。"
 
 #. Tag: para
-#: preseed.xml:610
+#: preseed.xml:614
 #, no-c-format
 msgid ""
 "The parameter <classname>mirror/udeb/suite</classname> determines the suite "
@@ -1040,7 +1045,7 @@ msgstr ""
 "suite</classname> 的值相同。"
 
 #. Tag: screen
-#: preseed.xml:622
+#: preseed.xml:626
 #, no-c-format
 msgid ""
 "d-i mirror/country string enter information manually\n"
@@ -1064,13 +1069,13 @@ msgstr ""
 "#d-i mirror/udeb/suite string testing"
 
 #. Tag: title
-#: preseed.xml:627
+#: preseed.xml:631
 #, no-c-format
 msgid "Partitioning"
 msgstr "分区"
 
 #. Tag: para
-#: preseed.xml:628
+#: preseed.xml:632
 #, fuzzy, no-c-format
 msgid ""
 "Using preseeding to partition the harddisk is very much limited to what is "
@@ -1086,7 +1091,7 @@ msgstr ""
 "立 RAID。"
 
 #. Tag: para
-#: preseed.xml:639
+#: preseed.xml:643
 #, no-c-format
 msgid ""
 "The identification of disks is dependent on the order in which their drivers "
@@ -1097,7 +1102,7 @@ msgstr ""
 "确的那一个。"
 
 #. Tag: screen
-#: preseed.xml:647
+#: preseed.xml:651
 #, fuzzy, no-c-format
 msgid ""
 "# If the system has free space you can choose to only partition that space.\n"
@@ -1226,13 +1231,13 @@ msgstr ""
 "d-i partman/confirm boolean true"
 
 #. Tag: title
-#: preseed.xml:652
+#: preseed.xml:656
 #, no-c-format
 msgid "Partitioning using RAID"
 msgstr "使用 RAID 分区"
 
 #. Tag: para
-#: preseed.xml:653
+#: preseed.xml:657
 #, no-c-format
 msgid ""
 "You can also use preseeding to set up partitions on software RAID arrays. "
@@ -1246,7 +1251,7 @@ msgstr ""
 "列中的所有设备；参见 <xref linkend=\"preseed-bootloader\"/>。"
 
 #. Tag: para
-#: preseed.xml:663
+#: preseed.xml:667
 #, no-c-format
 msgid ""
 "This type of automated partitioning is easy to get wrong. It is also a very "
@@ -1260,7 +1265,7 @@ msgstr ""
 "一下 <filename>/var/log/syslog</filename>。"
 
 #. Tag: para
-#: preseed.xml:671
+#: preseed.xml:675
 #, no-c-format
 msgid ""
 "Note that only RAID 0 and RAID 1 have been tested by the developers of the "
@@ -1271,7 +1276,7 @@ msgstr ""
 "RAID 设置像降级阵列或额外设备只经过了轻量级的测试。"
 
 #. Tag: screen
-#: preseed.xml:679
+#: preseed.xml:683
 #, no-c-format
 msgid ""
 "# NOTE: this option is of beta release quality and should be used carefully\n"
@@ -1369,13 +1374,13 @@ msgstr ""
 "d-i partman/confirm boolean true"
 
 #. Tag: title
-#: preseed.xml:684
+#: preseed.xml:688
 #, no-c-format
 msgid "Clock and time zone setup"
 msgstr "时钟与时区设置"
 
 #. Tag: screen
-#: preseed.xml:686
+#: preseed.xml:690
 #, no-c-format
 msgid ""
 "# Controls whether or not the hardware clock is set to UTC.\n"
@@ -1393,13 +1398,13 @@ msgstr ""
 "d-i time/zone string US/Eastern"
 
 #. Tag: title
-#: preseed.xml:691
+#: preseed.xml:695
 #, no-c-format
 msgid "Apt setup"
 msgstr "设置 apt"
 
 #. Tag: para
-#: preseed.xml:692
+#: preseed.xml:696
 #, no-c-format
 msgid ""
 "Setup of the <filename>/etc/apt/sources.list</filename> and basic "
@@ -1412,7 +1417,7 @@ msgstr ""
 "仓库。"
 
 #. Tag: screen
-#: preseed.xml:700
+#: preseed.xml:704
 #, no-c-format
 msgid ""
 "# You can choose to install non-free and contrib software.\n"
@@ -1448,13 +1453,13 @@ msgstr ""
 "#d-i apt-setup/local0/key string http://local.server/key"
 
 #. Tag: title
-#: preseed.xml:705
+#: preseed.xml:709
 #, no-c-format
 msgid "Account setup"
 msgstr "帐号设置"
 
 #. Tag: para
-#: preseed.xml:706
+#: preseed.xml:710
 #, no-c-format
 msgid ""
 "The password for the root account and name and password for a first regular "
@@ -1465,7 +1470,7 @@ msgstr ""
 "或 MD5 <emphasis>hashes</emphasis> 值。"
 
 #. Tag: para
-#: preseed.xml:713
+#: preseed.xml:717
 #, no-c-format
 msgid ""
 "Be aware that preseeding passwords is not completely secure as everyone with "
@@ -1478,7 +1483,7 @@ msgstr ""
 "MD5 哈西表相对安全一些，但也会造成安全的假象，MD5 哈西表也可以被暴力破解。"
 
 #. Tag: screen
-#: preseed.xml:723
+#: preseed.xml:727
 #, no-c-format
 msgid ""
 "# Skip creation of a root account (normal user account will be able to\n"
@@ -1524,7 +1529,7 @@ msgstr ""
 "#d-i passwd/user-password-crypted password [MD5 hash]"
 
 #. Tag: para
-#: preseed.xml:725
+#: preseed.xml:729
 #, no-c-format
 msgid ""
 "The <classname>passwd/root-password-crypted</classname> and "
@@ -1541,26 +1546,26 @@ msgstr ""
 "root 登录(例如使用 SSH key 认证或 sudo)。"
 
 #. Tag: para
-#: preseed.xml:735
+#: preseed.xml:739
 #, no-c-format
 msgid ""
 "An MD5 hash for a password can be generated using the following command."
 msgstr "密码的 MD5 hash 可以用下面命令产生。"
 
 #. Tag: screen
-#: preseed.xml:739
+#: preseed.xml:743
 #, no-c-format
 msgid "$ echo \"r00tme\" | mkpasswd -s -H MD5"
 msgstr "$ echo \"r00tme\" | mkpasswd -s -H MD5"
 
 #. Tag: title
-#: preseed.xml:745
+#: preseed.xml:749
 #, no-c-format
 msgid "Base system installation"
 msgstr "基本系统安装"
 
 #. Tag: para
-#: preseed.xml:746
+#: preseed.xml:750
 #, no-c-format
 msgid ""
 "There is actually not very much that can be preseeded for this stage of the "
@@ -1569,7 +1574,7 @@ msgid ""
 msgstr "本阶段的安装并没有多少东西需要预置。仅有一个与内核安装相关的问题。"
 
 #. Tag: screen
-#: preseed.xml:753
+#: preseed.xml:757
 #, no-c-format
 msgid ""
 "# Select the initramfs generator used to generate the initrd for 2.6 "
@@ -1581,13 +1586,13 @@ msgstr ""
 "#d-i base-installer/kernel/linux/initramfs-generators string yaird"
 
 #. Tag: title
-#: preseed.xml:758
+#: preseed.xml:762
 #, no-c-format
 msgid "Boot loader installation"
 msgstr "安装引导加载器"
 
 #. Tag: screen
-#: preseed.xml:760
+#: preseed.xml:764
 #, no-c-format
 msgid ""
 "# Grub is the default boot loader (for x86). If you want lilo installed\n"
@@ -1635,13 +1640,13 @@ msgstr ""
 "#d-i grub-installer/bootdev  string (hd0,0) (hd1,0) (hd2,0)"
 
 #. Tag: title
-#: preseed.xml:765
+#: preseed.xml:769
 #, no-c-format
 msgid "Package selection"
 msgstr "选择软件包"
 
 #. Tag: para
-#: preseed.xml:766
+#: preseed.xml:770
 #, no-c-format
 msgid ""
 "You can choose to install any combination of tasks that are available. "
@@ -1649,73 +1654,73 @@ msgid ""
 msgstr "您可以选择安装存在的任务的组合。写这篇文章时已有的任务是："
 
 #. Tag: userinput
-#: preseed.xml:775
+#: preseed.xml:779
 #, no-c-format
 msgid "standard"
 msgstr "标准"
 
 #. Tag: userinput
-#: preseed.xml:778
+#: preseed.xml:782
 #, no-c-format
 msgid "desktop"
 msgstr "桌面"
 
 #. Tag: userinput
-#: preseed.xml:781
+#: preseed.xml:785
 #, no-c-format
 msgid "gnome-desktop"
 msgstr "gnome 桌面"
 
 #. Tag: userinput
-#: preseed.xml:784
+#: preseed.xml:788
 #, no-c-format
 msgid "kde-desktop"
 msgstr "kde 桌面"
 
 #. Tag: userinput
-#: preseed.xml:787
+#: preseed.xml:791
 #, no-c-format
 msgid "web-server"
 msgstr "web 服务器"
 
 #. Tag: userinput
-#: preseed.xml:790
+#: preseed.xml:794
 #, no-c-format
 msgid "print-server"
 msgstr "打印服务器"
 
 #. Tag: userinput
-#: preseed.xml:793
+#: preseed.xml:797
 #, no-c-format
 msgid "dns-server"
 msgstr "dns 服务器"
 
 #. Tag: userinput
-#: preseed.xml:796
+#: preseed.xml:800
 #, no-c-format
 msgid "file-server"
 msgstr "文件服务器"
 
 #. Tag: userinput
-#: preseed.xml:799
+#: preseed.xml:803
 #, no-c-format
 msgid "mail-server"
 msgstr "邮件服务器"
 
 #. Tag: userinput
-#: preseed.xml:802
+#: preseed.xml:806
 #, no-c-format
 msgid "sql-database"
 msgstr "SQL 数据库"
 
 #. Tag: userinput
-#: preseed.xml:805
+#: preseed.xml:809
 #, no-c-format
 msgid "laptop"
 msgstr "便携机"
 
 #. Tag: para
-#: preseed.xml:809
+#: preseed.xml:813
 #, no-c-format
 msgid ""
 "You can also choose to install no tasks, and force the installation of a set "
@@ -1726,7 +1731,7 @@ msgstr ""
 "userinput> 任务。"
 
 #. Tag: para
-#: preseed.xml:815
+#: preseed.xml:819
 #, no-c-format
 msgid ""
 "If you want to install some individual packages in addition to packages "
@@ -1738,7 +1743,7 @@ msgstr ""
 "include</classname>。该参数的值可以用逗号或空格分开，便于在内核命令行上使用。"
 
 #. Tag: screen
-#: preseed.xml:825
+#: preseed.xml:829
 #, no-c-format
 msgid ""
 "tasksel tasksel/first multiselect standard, desktop\n"
@@ -1768,13 +1773,13 @@ msgstr ""
 "#popularity-contest popularity-contest/participate boolean false"
 
 #. Tag: title
-#: preseed.xml:830
+#: preseed.xml:834
 #, no-c-format
 msgid "Finishing up the first stage install"
 msgstr "完成第一阶段安装"
 
 #. Tag: screen
-#: preseed.xml:832
+#: preseed.xml:836
 #, no-c-format
 msgid ""
 "# Avoid that last message about the install being complete.\n"
@@ -1792,13 +1797,13 @@ msgstr ""
 "#d-i cdrom-detect/eject boolean false"
 
 #. Tag: title
-#: preseed.xml:837
+#: preseed.xml:841
 #, no-c-format
 msgid "Mailer configuration"
 msgstr "邮件设置"
 
 #. Tag: para
-#: preseed.xml:838
+#: preseed.xml:842
 #, no-c-format
 msgid ""
 "During a normal install, exim asks only a few questions. Here's how to avoid "
@@ -1807,7 +1812,7 @@ msgstr ""
 "普通安装方式下，exim 会问一些问题。这里是避免的方法。也可以有更多的预置内容。"
 
 #. Tag: screen
-#: preseed.xml:845
+#: preseed.xml:849
 #, no-c-format
 msgid ""
 "exim4-config exim4/dc_eximconfig_configtype \\\n"
@@ -1823,13 +1828,13 @@ msgstr ""
 "exim4-config exim4/dc_postmaster string"
 
 #. Tag: title
-#: preseed.xml:850
+#: preseed.xml:854
 #, no-c-format
 msgid "X configuration"
 msgstr "设置 X"
 
 #. Tag: para
-#: preseed.xml:851
+#: preseed.xml:855
 #, no-c-format
 msgid ""
 "Preseeding Debian's X config is possible, but you probably need to know some "
@@ -1840,7 +1845,7 @@ msgstr ""
 "的 X 配置工具无法自动设置每一件事。"
 
 #. Tag: screen
-#: preseed.xml:859
+#: preseed.xml:863
 #, no-c-format
 msgid ""
 "# X can detect the right driver for some cards, but if you're preseeding,\n"
@@ -1888,13 +1893,13 @@ msgstr ""
 "       select 1024x768 @ 60 Hz"
 
 #. Tag: title
-#: preseed.xml:864
+#: preseed.xml:868
 #, no-c-format
 msgid "Preseeding other packages"
 msgstr "预置其他的软件包"
 
 #. Tag: screen
-#: preseed.xml:866
+#: preseed.xml:870
 #, no-c-format
 msgid ""
 "# Depending on what software you choose to install, or if things go wrong\n"
@@ -1914,19 +1919,19 @@ msgstr ""
 "#   debconf-get-selections >> file"
 
 #. Tag: title
-#: preseed.xml:872
+#: preseed.xml:876
 #, no-c-format
 msgid "Advanced options"
 msgstr "高级选项"
 
 #. Tag: title
-#: preseed.xml:875
+#: preseed.xml:879
 #, no-c-format
 msgid "Shell commands"
 msgstr "shell 命令"
 
 #. Tag: screen
-#: preseed.xml:877
+#: preseed.xml:881
 #, no-c-format
 msgid ""
 "# d-i preseeding is inherently not secure. Nothing in the installer checks\n"
@@ -1964,13 +1969,13 @@ msgstr ""
 "#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh"
 
 #. Tag: title
-#: preseed.xml:882
+#: preseed.xml:886
 #, no-c-format
 msgid "Chainloading preconfiguration files"
 msgstr "预置文件链"
 
 #. Tag: para
-#: preseed.xml:883
+#: preseed.xml:887
 #, no-c-format
 msgid ""
 "It is possible to include other preconfiguration files from a "
@@ -1984,7 +1989,7 @@ msgstr ""
 "另外的文件里面。"
 
 #. Tag: screen
-#: preseed.xml:893
+#: preseed.xml:897
 #, no-c-format
 msgid ""
 "# More that one file can be listed, separated by spaces; all will be\n"
diff --git a/po/zh_CN/random-bits.po b/po/zh_CN/random-bits.po
index e39d7e466..021295922 100644
--- a/po/zh_CN/random-bits.po
+++ b/po/zh_CN/random-bits.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-11 02:03+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-10-16 15:53+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -438,16 +438,17 @@ msgstr "各软件集所需的磁盘空间"
 
 #. Tag: para
 #: random-bits.xml:189
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
-"The base installation for i386 using the default 2.4 kernel, including all "
-"standard packages, requires 573MB of disk space."
+"The base installation for i386 using the default 2.6 kernel, including all "
+"standard packages, requires 585MB of disk space. A minimal base "
+"installation, without the standard task selected, will take 365MB."
 msgstr ""
 "在 i386 架构上，基本的安装默认使用 2.4 内核，需要 573MB 的磁盘空间，这里面包"
 "含了所有的标准软件包。"
 
 #. Tag: para
-#: random-bits.xml:194
+#: random-bits.xml:196
 #, no-c-format
 msgid ""
 "The following table lists sizes reported by aptitude for the tasks listed in "
@@ -460,7 +461,7 @@ msgstr ""
 "装后所占的空间，可能会小于这两个软件集分别安装所占的空间。"
 
 #. Tag: para
-#: random-bits.xml:201
+#: random-bits.xml:203
 #, no-c-format
 msgid ""
 "Note that you will need to add the sizes listed in the table to the size of "
@@ -474,201 +475,225 @@ msgstr ""
 "寸</quote>是(临时地)用在 <filename>/var</filename>。"
 
 #. Tag: entry
-#: random-bits.xml:214
+#: random-bits.xml:216
 #, no-c-format
 msgid "Task"
 msgstr "任务"
 
 #. Tag: entry
-#: random-bits.xml:215
+#: random-bits.xml:217
 #, no-c-format
 msgid "Installed size (MB)"
 msgstr "安装尺寸 (MB)"
 
 #. Tag: entry
-#: random-bits.xml:216
+#: random-bits.xml:218
 #, no-c-format
 msgid "Download size (MB)"
 msgstr "下载尺寸 (MB)"
 
 #. Tag: entry
-#: random-bits.xml:217
+#: random-bits.xml:219
 #, no-c-format
 msgid "Space needed to install (MB)"
 msgstr "用于安装所需空间 (MB)"
 
 #. Tag: entry
-#: random-bits.xml:223
+#: random-bits.xml:225
 #, no-c-format
 msgid "Desktop"
 msgstr "桌面"
 
 #. Tag: entry
-#: random-bits.xml:224
+#: random-bits.xml:226
 #, no-c-format
-msgid "1392"
-msgstr "1392"
+msgid "1258"
+msgstr ""
 
 #. Tag: entry
-#: random-bits.xml:225
-#, no-c-format
-msgid "<entry>460</entry>"
-msgstr "<entry>460</entry>"
+#: random-bits.xml:227
+#, fuzzy, no-c-format
+msgid "<entry>418</entry>"
+msgstr "<entry>48</entry>"
 
 #. Tag: entry
-#: random-bits.xml:226
+#: random-bits.xml:228
 #, no-c-format
-msgid "1852"
-msgstr "1852"
+msgid "1676"
+msgstr ""
 
 #. Tag: entry
-#: random-bits.xml:230
+#: random-bits.xml:232
 #, no-c-format
-msgid "Web server"
-msgstr "Web 服务器"
+msgid "Laptop"
+msgstr ""
 
 #. Tag: entry
-#: random-bits.xml:231
-#, no-c-format
-msgid "<entry>36</entry>"
-msgstr "<entry>36</entry>"
+#: random-bits.xml:233 random-bits.xml:242
+#, fuzzy, no-c-format
+msgid "<entry>46</entry>"
+msgstr "<entry>460</entry>"
 
 #. Tag: entry
-#: random-bits.xml:232
-#, no-c-format
-msgid "<entry>12</entry>"
-msgstr "<entry>12</entry>"
+#: random-bits.xml:234
+#, fuzzy, no-c-format
+msgid "<entry>16</entry>"
+msgstr "<entry>168</entry>"
 
 #. Tag: entry
-#: random-bits.xml:233
+#: random-bits.xml:235
+#, fuzzy, no-c-format
+msgid "<entry>62</entry>"
+msgstr "<entry>2</entry>"
+
+#. Tag: entry
+#: random-bits.xml:239
 #, no-c-format
-msgid "<entry>48</entry>"
-msgstr "<entry>48</entry>"
+msgid "Web server"
+msgstr "Web 服务器"
 
 #. Tag: entry
-#: random-bits.xml:237
+#: random-bits.xml:240
+#, fuzzy, no-c-format
+msgid "<entry>35</entry>"
+msgstr "<entry>3</entry>"
+
+#. Tag: entry
+#: random-bits.xml:241
+#, fuzzy, no-c-format
+msgid "<entry>11</entry>"
+msgstr "<entry>1</entry>"
+
+#. Tag: entry
+#: random-bits.xml:246
 #, no-c-format
 msgid "Print server"
 msgstr "打印服务器"
 
 #. Tag: entry
-#: random-bits.xml:238
-#, no-c-format
-msgid "<entry>168</entry>"
-msgstr "<entry>168</entry>"
+#: random-bits.xml:247
+#, fuzzy, no-c-format
+msgid "<entry>326</entry>"
+msgstr "<entry>36</entry>"
 
 #. Tag: entry
-#: random-bits.xml:239
-#, no-c-format
-msgid "<entry>58</entry>"
+#: random-bits.xml:248
+#, fuzzy, no-c-format
+msgid "<entry>95</entry>"
 msgstr "<entry>58</entry>"
 
 #. Tag: entry
-#: random-bits.xml:240
-#, no-c-format
-msgid "<entry>226</entry>"
-msgstr "<entry>226</entry>"
+#: random-bits.xml:249
+#, fuzzy, no-c-format
+msgid "<entry>421</entry>"
+msgstr "<entry>21</entry>"
 
 #. Tag: entry
-#: random-bits.xml:244
+#: random-bits.xml:253
 #, no-c-format
 msgid "DNS server"
 msgstr "DNS 服务器"
 
 #. Tag: entry
-#: random-bits.xml:245
+#: random-bits.xml:254
 #, no-c-format
 msgid "<entry>2</entry>"
 msgstr "<entry>2</entry>"
 
 #. Tag: entry
-#: random-bits.xml:246
+#: random-bits.xml:255
 #, no-c-format
 msgid "<entry>1</entry>"
 msgstr "<entry>1</entry>"
 
 #. Tag: entry
-#: random-bits.xml:247 random-bits.xml:260
+#: random-bits.xml:256
 #, no-c-format
 msgid "<entry>3</entry>"
 msgstr "<entry>3</entry>"
 
 #. Tag: entry
-#: random-bits.xml:251
+#: random-bits.xml:260
 #, no-c-format
 msgid "File server"
 msgstr "文件服务器"
 
 #. Tag: entry
-#: random-bits.xml:252
-#, no-c-format
-msgid "<entry>47</entry>"
-msgstr "<entry>47</entry>"
+#: random-bits.xml:261
+#, fuzzy, no-c-format
+msgid "<entry>50</entry>"
+msgstr "<entry>58</entry>"
 
 #. Tag: entry
-#: random-bits.xml:253
+#: random-bits.xml:262
 #, no-c-format
-msgid "<entry>24</entry>"
-msgstr "<entry>24</entry>"
+msgid "<entry>21</entry>"
+msgstr "<entry>21</entry>"
 
 #. Tag: entry
-#: random-bits.xml:254
+#: random-bits.xml:263
 #, no-c-format
 msgid "<entry>71</entry>"
 msgstr "<entry>71</entry>"
 
 #. Tag: entry
-#: random-bits.xml:258
+#: random-bits.xml:267
 #, no-c-format
 msgid "Mail server"
 msgstr "邮件服务器"
 
 #. Tag: entry
-#: random-bits.xml:259
-#, no-c-format
-msgid "<entry>10</entry>"
-msgstr "<entry>10</entry>"
-
-#. Tag: entry
-#: random-bits.xml:261
+#: random-bits.xml:268
 #, no-c-format
 msgid "<entry>13</entry>"
 msgstr "<entry>13</entry>"
 
 #. Tag: entry
-#: random-bits.xml:265
+#: random-bits.xml:269
+#, fuzzy, no-c-format
+msgid "<entry>5</entry>"
+msgstr "<entry>58</entry>"
+
+#. Tag: entry
+#: random-bits.xml:270
+#, fuzzy, no-c-format
+msgid "<entry>18</entry>"
+msgstr "<entry>168</entry>"
+
+#. Tag: entry
+#: random-bits.xml:274
 #, no-c-format
 msgid "SQL database"
 msgstr "SQL 数据库"
 
 #. Tag: entry
-#: random-bits.xml:266
+#: random-bits.xml:275
 #, no-c-format
-msgid "<entry>66</entry>"
-msgstr "<entry>66</entry>"
+msgid "<entry>24</entry>"
+msgstr "<entry>24</entry>"
 
 #. Tag: entry
-#: random-bits.xml:267
-#, no-c-format
-msgid "<entry>21</entry>"
-msgstr "<entry>21</entry>"
+#: random-bits.xml:276
+#, fuzzy, no-c-format
+msgid "<entry>8</entry>"
+msgstr "<entry>48</entry>"
 
 #. Tag: entry
-#: random-bits.xml:268
-#, no-c-format
-msgid "<entry>87</entry>"
-msgstr "<entry>87</entry>"
+#: random-bits.xml:277
+#, fuzzy, no-c-format
+msgid "<entry>32</entry>"
+msgstr "<entry>2</entry>"
 
 #. Tag: para
-#: random-bits.xml:274
-#, no-c-format
+#: random-bits.xml:283
+#, fuzzy, no-c-format
 msgid ""
-"The <emphasis>Desktop</emphasis> task will install both the GNOME and KDE "
-"desktop environments."
+"The <emphasis>Desktop</emphasis> task will install the GNOME desktop "
+"environment."
 msgstr "<emphasis>桌面</emphasis> 任务将同时安装 GNOME 和 KDE 桌面环境。"
 
 #. Tag: para
-#: random-bits.xml:281
+#: random-bits.xml:290
 #, no-c-format
 msgid ""
 "If you install in a language other than English, <command>tasksel</command> "
@@ -681,13 +706,13 @@ msgstr ""
 "不同；您应该给 200MB 以上的空间用于下载和安装。"
 
 #. Tag: title
-#: random-bits.xml:296
+#: random-bits.xml:305
 #, no-c-format
 msgid "Installing &debian; from a Unix/Linux System"
 msgstr "通过 Unix/Linux 系统来安装 &debian;"
 
 #. Tag: para
-#: random-bits.xml:298
+#: random-bits.xml:307
 #, no-c-format
 msgid ""
 "This section explains how to install &debian; from an existing Unix or Linux "
@@ -708,7 +733,7 @@ msgstr ""
 "中输入的。"
 
 #. Tag: para
-#: random-bits.xml:310
+#: random-bits.xml:319
 #, no-c-format
 msgid ""
 "Once you've got the new Debian system configured to your preference, you can "
@@ -723,13 +748,13 @@ msgstr ""
 "过任何引导或者安装介质完成安装的权宜之计。"
 
 #. Tag: title
-#: random-bits.xml:322
+#: random-bits.xml:331
 #, no-c-format
 msgid "Getting Started"
 msgstr "准备运动"
 
 #. Tag: para
-#: random-bits.xml:323
+#: random-bits.xml:332
 #, no-c-format
 msgid ""
 "With your current *nix partitioning tools, repartition the hard drive as "
@@ -742,7 +767,7 @@ msgstr ""
 "X，就需要至少 300MB 的空间了。"
 
 #. Tag: para
-#: random-bits.xml:330
+#: random-bits.xml:339
 #, no-c-format
 msgid ""
 "Create file systems on your partitions. For example, to create an ext3 file "
@@ -760,7 +785,7 @@ msgstr ""
 "userinput>。"
 
 #. Tag: para
-#: random-bits.xml:340
+#: random-bits.xml:349
 #, no-c-format
 msgid ""
 "Initialize and activate swap (substitute the partition number for your "
@@ -783,7 +808,7 @@ msgstr ""
 "统)。挂载点的名称是任意的，后面的步骤将会用到它。"
 
 #. Tag: screen
-#: random-bits.xml:352
+#: random-bits.xml:361
 #, no-c-format
 msgid ""
 "# mkdir /mnt/debinst\n"
@@ -793,7 +818,7 @@ msgstr ""
 "# mount /dev/hda6 /mnt/debinst"
 
 #. Tag: para
-#: random-bits.xml:355
+#: random-bits.xml:364
 #, no-c-format
 msgid ""
 "If you want to have parts of the filesystem (e.g. /usr) mounted on separate "
@@ -804,13 +829,13 @@ msgstr ""
 "手动创建和加载这些目录。"
 
 #. Tag: title
-#: random-bits.xml:365
+#: random-bits.xml:374
 #, no-c-format
 msgid "Install <command>debootstrap</command>"
 msgstr "安装 <command>debootstrap</command>"
 
 #. Tag: para
-#: random-bits.xml:366
+#: random-bits.xml:375
 #, no-c-format
 msgid ""
 "The utility used by the Debian installer, and recognized as the official way "
@@ -833,7 +858,7 @@ msgstr ""
 "<command>debootstrap</command>。"
 
 #. Tag: para
-#: random-bits.xml:396
+#: random-bits.xml:405
 #, no-c-format
 msgid ""
 "Or, you can use the following procedure to install it manually. Make a work "
@@ -847,13 +872,18 @@ msgid ""
 "ulink>, copy the package to the work folder, and extract the files from it. "
 "You will need to have root privileges to install the files."
 msgstr ""
-"或者您也可以通过下面的步骤手动安装它。先新建一个工作目录，用于解压后的 .deb 文件： <informalexample><screen>\n"
+"或者您也可以通过下面的步骤手动安装它。先新建一个工作目录，用于解压后的 .deb "
+"文件： <informalexample><screen>\n"
 "# mkdir work\n"
 "# cd work\n"
-"</screen></informalexample> <command>debootstrap</command> 的二进制文件位于 Debian archive (请确保选择了与您架构相对应的文件)。下载 <command>debootstrap</command> .deb，它位于 <ulink url=\"http://ftp.debian.org/debian/pool/main/d/debootstrap/\"> pool</ulink>，把软件包拷贝到工作目录，并解压获得该文件。把二进制文件安装到系统中，您必须要拥有 root 的权限。"
+"</screen></informalexample> <command>debootstrap</command> 的二进制文件位于 "
+"Debian archive (请确保选择了与您架构相对应的文件)。下载 "
+"<command>debootstrap</command> .deb，它位于 <ulink url=\"http://ftp.debian."
+"org/debian/pool/main/d/debootstrap/\"> pool</ulink>，把软件包拷贝到工作目录，"
+"并解压获得该文件。把二进制文件安装到系统中，您必须要拥有 root 的权限。"
 
 #. Tag: screen
-#: random-bits.xml:411
+#: random-bits.xml:420
 #, no-c-format
 msgid ""
 "# ar -x debootstrap_0.X.X_all.deb\n"
@@ -865,13 +895,13 @@ msgstr ""
 "# zcat /full-path-to-work/work/data.tar.gz | tar xv"
 
 #. Tag: title
-#: random-bits.xml:417
+#: random-bits.xml:426
 #, no-c-format
 msgid "Run <command>debootstrap</command>"
 msgstr "运行 <command>debootstrap</command>"
 
 #. Tag: para
-#: random-bits.xml:418
+#: random-bits.xml:427
 #, no-c-format
 msgid ""
 "<command>debootstrap</command> can download the needed files directly from "
@@ -887,7 +917,7 @@ msgstr ""
 "README.mirrors\"></ulink>。"
 
 #. Tag: para
-#: random-bits.xml:427
+#: random-bits.xml:436
 #, no-c-format
 msgid ""
 "If you have a &releasename; &debian; CD mounted at <filename>/cdrom</"
@@ -899,7 +929,7 @@ msgstr ""
 "debian/</userinput>"
 
 #. Tag: para
-#: random-bits.xml:433
+#: random-bits.xml:442
 #, no-c-format
 msgid ""
 "Substitute one of the following for <replaceable>ARCH</replaceable> in the "
@@ -919,7 +949,7 @@ msgstr ""
 "<userinput>sparc</userinput>。"
 
 #. Tag: screen
-#: random-bits.xml:450
+#: random-bits.xml:459
 #, no-c-format
 msgid ""
 "# /usr/sbin/debootstrap --arch ARCH &releasename; \\\n"
@@ -929,13 +959,13 @@ msgstr ""
 "http://http.us.debian.org/debian"
 
 #. Tag: title
-#: random-bits.xml:456
+#: random-bits.xml:465
 #, no-c-format
 msgid "Configure The Base System"
 msgstr "基系统的配置"
 
 #. Tag: para
-#: random-bits.xml:457
+#: random-bits.xml:466
 #, no-c-format
 msgid ""
 "Now you've got a real Debian system, though rather lean, on disk. "
@@ -945,19 +975,19 @@ msgstr ""
 "<command>Chroot</command> 用来进入该系统："
 
 #. Tag: screen
-#: random-bits.xml:462
+#: random-bits.xml:471
 #, no-c-format
 msgid "# LANG= chroot /mnt/debinst /bin/bash"
 msgstr "# LANG= chroot /mnt/debinst /bin/bash"
 
 #. Tag: title
-#: random-bits.xml:467
+#: random-bits.xml:476
 #, no-c-format
 msgid "Mount Partitions"
 msgstr "分区的挂载"
 
 #. Tag: para
-#: random-bits.xml:468
+#: random-bits.xml:477
 #, no-c-format
 msgid ""
 "You need to create <filename>/etc/fstab</filename>. "
@@ -1019,13 +1049,13 @@ msgstr ""
 "a</userinput>，那么请一定要再接着做之前先把 proc 挂载好："
 
 #. Tag: screen
-#: random-bits.xml:488
+#: random-bits.xml:497
 #, no-c-format
 msgid "# mount -t proc proc /proc"
 msgstr "# mount -t proc proc /proc"
 
 #. Tag: para
-#: random-bits.xml:490
+#: random-bits.xml:499
 #, no-c-format
 msgid ""
 "The command <userinput>ls /proc</userinput> should now show a non-empty "
@@ -1036,31 +1066,31 @@ msgstr ""
 "chroot: 以为加载 proc。"
 
 #. Tag: screen
-#: random-bits.xml:496
+#: random-bits.xml:505
 #, no-c-format
 msgid "# mount -t proc proc /mnt/debinst/proc"
 msgstr "# mount -t proc proc /mnt/debinst/proc"
 
 #. Tag: title
-#: random-bits.xml:502
+#: random-bits.xml:511
 #, no-c-format
 msgid "Configure Keyboard"
 msgstr "键盘的配置"
 
 #. Tag: para
-#: random-bits.xml:503
+#: random-bits.xml:512
 #, no-c-format
 msgid "To configure your keyboard:"
 msgstr "若要配置您的键盘，请："
 
 #. Tag: screen
-#: random-bits.xml:507
+#: random-bits.xml:516
 #, no-c-format
 msgid "# dpkg-reconfigure console-data"
 msgstr "# dpkg-reconfigure console-data"
 
 #. Tag: para
-#: random-bits.xml:509
+#: random-bits.xml:518
 #, no-c-format
 msgid ""
 "Note that the keyboard cannot be set while in the chroot, but will be "
@@ -1068,13 +1098,13 @@ msgid ""
 msgstr "注意，在 chroot 里面不能设置键盘，但重新启动以后可以。"
 
 #. Tag: title
-#: random-bits.xml:518
+#: random-bits.xml:527
 #, no-c-format
 msgid "Configure Networking"
 msgstr "网络的配置"
 
 #. Tag: para
-#: random-bits.xml:519
+#: random-bits.xml:528
 #, no-c-format
 msgid ""
 "To configure networking, edit <filename>/etc/network/interfaces</filename>, "
@@ -1171,13 +1201,13 @@ msgstr ""
 "统启动时，每块网卡就能获得您所预期的 interface 名称了 (eth0、eth1 等等)。"
 
 #. Tag: title
-#: random-bits.xml:556
+#: random-bits.xml:565
 #, no-c-format
 msgid "Configure Locales"
 msgstr "locales 的设置"
 
 #. Tag: para
-#: random-bits.xml:557
+#: random-bits.xml:566
 #, no-c-format
 msgid ""
 "To configure your locale settings to use a language other than English, "
@@ -1201,13 +1231,13 @@ msgstr ""
 "locale 之前，请先参阅相应的本地化指南(localization HOWTO)。"
 
 #. Tag: title
-#: random-bits.xml:575
+#: random-bits.xml:584
 #, no-c-format
 msgid "Install a Kernel"
 msgstr "内核的安装"
 
 #. Tag: para
-#: random-bits.xml:576
+#: random-bits.xml:585
 #, no-c-format
 msgid ""
 "If you intend to boot this system, you probably want a Linux kernel and a "
@@ -1222,7 +1252,7 @@ msgstr ""
 "</screen></informalexample> 接下来使用所选包名来安装。"
 
 #. Tag: screen
-#: random-bits.xml:585
+#: random-bits.xml:594
 #, no-c-format
 msgid ""
 "# aptitude install linux-image-<replaceable>&kernelversion;-arch-etc</"
@@ -1232,13 +1262,13 @@ msgstr ""
 "replaceable>"
 
 #. Tag: title
-#: random-bits.xml:591
+#: random-bits.xml:600
 #, no-c-format
 msgid "Set up the Boot Loader"
 msgstr "Boot Loader 的设置"
 
 #. Tag: para
-#: random-bits.xml:592
+#: random-bits.xml:601
 #, no-c-format
 msgid ""
 "To make your &debian; system bootable, set up your boot loader to load the "
@@ -1251,7 +1281,7 @@ msgstr ""
 "loader，因此您要在 Debian 的 chroot 中使用 <command>aptitude</command> 完成。"
 
 #. Tag: para
-#: random-bits.xml:599
+#: random-bits.xml:608
 #, no-c-format
 msgid ""
 "Check <userinput>info grub</userinput> or <userinput>man lilo.conf</"
@@ -1272,13 +1302,13 @@ msgstr ""
 "它就会用哪个系统里的 <filename>lilo.conf</filename> )。"
 
 #. Tag: para
-#: random-bits.xml:610
+#: random-bits.xml:619
 #, no-c-format
 msgid "Here is a basic <filename>/etc/lilo.conf</filename> as an example:"
 msgstr "下面有一个简单的<filename>/etc/lilo.conf</filename> 作为例子："
 
 #. Tag: screen
-#: random-bits.xml:614
+#: random-bits.xml:623
 #, no-c-format
 msgid ""
 "boot=/dev/hda6\n"
@@ -1298,7 +1328,7 @@ msgstr ""
 "label=Debian"
 
 #. Tag: para
-#: random-bits.xml:616
+#: random-bits.xml:625
 #, no-c-format
 msgid ""
 "Check <userinput>man yaboot.conf</userinput> for instructions on setting up "
@@ -1316,7 +1346,7 @@ msgstr ""
 "filename> )。"
 
 #. Tag: para
-#: random-bits.xml:626
+#: random-bits.xml:635
 #, no-c-format
 msgid ""
 "Here is a basic <filename>/etc/yaboot.conf</filename> as an example: "
@@ -1346,13 +1376,13 @@ msgstr ""
 "userinput> 换成 <userinput>hd:</userinput>。"
 
 #. Tag: title
-#: random-bits.xml:644
+#: random-bits.xml:653
 #, no-c-format
 msgid "Installing &debian; over Parallel Line IP (PLIP)"
 msgstr "通过 Parallel Line IP (PLIP) 来安装 &debian;"
 
 #. Tag: para
-#: random-bits.xml:646
+#: random-bits.xml:655
 #, no-c-format
 msgid ""
 "This section explains how to install &debian; on a computer without an "
@@ -1365,7 +1395,7 @@ msgstr ""
 "具有 Debian 镜像的网络(例如，互联网)。"
 
 #. Tag: para
-#: random-bits.xml:654
+#: random-bits.xml:663
 #, no-c-format
 msgid ""
 "In the example in this appendix we will set up a PLIP connection using a "
@@ -1379,7 +1409,7 @@ msgstr ""
 "IP 地址(这些地址在您的网络地址空间里面未被占用)。"
 
 #. Tag: para
-#: random-bits.xml:662
+#: random-bits.xml:671
 #, no-c-format
 msgid ""
 "The PLIP connection set up during the installation will also be available "
@@ -1390,7 +1420,7 @@ msgstr ""
 "linkend=\"boot-new\"/>)。"
 
 #. Tag: para
-#: random-bits.xml:667
+#: random-bits.xml:676
 #, no-c-format
 msgid ""
 "Before you start, you will need to check the BIOS configuration (IO base "
@@ -1402,13 +1432,13 @@ msgstr ""
 "为 <literal>io=0x378</literal>，<literal>irq=7</literal>。"
 
 #. Tag: title
-#: random-bits.xml:677
+#: random-bits.xml:686
 #, no-c-format
 msgid "Requirements"
 msgstr "需求"
 
 #. Tag: para
-#: random-bits.xml:680
+#: random-bits.xml:689
 #, no-c-format
 msgid ""
 "A target computer, called <emphasis>target</emphasis>, where Debian will be "
@@ -1416,13 +1446,13 @@ msgid ""
 msgstr "目标计算机，称为 <emphasis>target</emphasis>，将安装 Debian 在上面。"
 
 #. Tag: para
-#: random-bits.xml:686
+#: random-bits.xml:695
 #, no-c-format
 msgid "System installation media; see <xref linkend=\"installation-media\"/>."
 msgstr "系统安装介质；参阅 <xref linkend=\"installation-media\"/>。"
 
 #. Tag: para
-#: random-bits.xml:691
+#: random-bits.xml:700
 #, no-c-format
 msgid ""
 "Another computer connected to the Internet, called <emphasis>source</"
@@ -1431,7 +1461,7 @@ msgstr ""
 "另外一台连接到互联网的计算机，称为 <emphasis>source</emphasis>，功能是网关。"
 
 #. Tag: para
-#: random-bits.xml:697
+#: random-bits.xml:706
 #, no-c-format
 msgid ""
 "A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;"
@@ -1442,13 +1472,13 @@ msgstr ""
 "Install-HOWTO</ulink> 了解这种线的更多信息，以及如何自己制作。"
 
 #. Tag: title
-#: random-bits.xml:709
+#: random-bits.xml:718
 #, no-c-format
 msgid "Setting up source"
 msgstr "建立源"
 
 #. Tag: para
-#: random-bits.xml:710
+#: random-bits.xml:719
 #, no-c-format
 msgid ""
 "The following shell script is a simple example of how to configure the "
@@ -1458,7 +1488,7 @@ msgstr ""
 "算机。"
 
 #. Tag: screen
-#: random-bits.xml:715
+#: random-bits.xml:724
 #, no-c-format
 msgid ""
 "#!/bin/sh\n"
@@ -1500,13 +1530,13 @@ msgstr ""
 "echo 1 > /proc/sys/net/ipv4/ip_forward"
 
 #. Tag: title
-#: random-bits.xml:721
+#: random-bits.xml:730
 #, no-c-format
 msgid "Installing target"
 msgstr "安装目标"
 
 #. Tag: para
-#: random-bits.xml:722
+#: random-bits.xml:731
 #, no-c-format
 msgid ""
 "Boot the installation media. The installation needs to be run in expert "
@@ -1530,13 +1560,13 @@ msgstr ""
 "</screen></informalexample> 下面是安装过程中各阶段所要提供的答案。"
 
 #. Tag: guimenuitem
-#: random-bits.xml:741
+#: random-bits.xml:750
 #, no-c-format
 msgid "Load installer components from CD"
 msgstr "从光盘加载安装组件"
 
 #. Tag: para
-#: random-bits.xml:743
+#: random-bits.xml:752
 #, no-c-format
 msgid ""
 "Select the <userinput>plip-modules</userinput> option from the list; this "
@@ -1546,13 +1576,13 @@ msgstr ""
 "用 PLIP 驱动。"
 
 #. Tag: guimenuitem
-#: random-bits.xml:751
+#: random-bits.xml:760
 #, no-c-format
 msgid "Detect network hardware"
 msgstr "侦测网络硬件"
 
 #. Tag: para
-#: random-bits.xml:756
+#: random-bits.xml:765
 #, no-c-format
 msgid ""
 "If target <emphasis>does</emphasis> have a network card, a list of driver "
@@ -1565,7 +1595,7 @@ msgstr ""
 "系统没有网卡，安装程序不会显示该列表。"
 
 #. Tag: para
-#: random-bits.xml:765
+#: random-bits.xml:774
 #, no-c-format
 msgid ""
 "Because no network card was detected/selected earlier, the installer will "
@@ -1576,19 +1606,19 @@ msgstr ""
 "<userinput>plip</userinput> 模块。"
 
 #. Tag: guimenuitem
-#: random-bits.xml:777
+#: random-bits.xml:786
 #, no-c-format
 msgid "Configure the network"
 msgstr "配置网络"
 
 #. Tag: para
-#: random-bits.xml:780
+#: random-bits.xml:789
 #, no-c-format
 msgid "Auto-configure network with DHCP: No"
 msgstr "Auto-configure network with DHCP: No"
 
 #. Tag: para
-#: random-bits.xml:785
+#: random-bits.xml:794
 #, no-c-format
 msgid ""
 "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
@@ -1596,7 +1626,7 @@ msgstr ""
 "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
 
 #. Tag: para
-#: random-bits.xml:790
+#: random-bits.xml:799
 #, no-c-format
 msgid ""
 "Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
@@ -1606,7 +1636,7 @@ msgstr ""
 "userinput>"
 
 #. Tag: para
-#: random-bits.xml:796
+#: random-bits.xml:805
 #, no-c-format
 msgid ""
 "Name server addresses: you can enter the same addresses used on source (see "
@@ -1614,3 +1644,27 @@ msgid ""
 msgstr ""
 "Name server addresses: 您可以使用与源计算机相同的地址 (参阅 <filename>/etc/"
 "resolv.conf</filename>)"
+
+#~ msgid "1392"
+#~ msgstr "1392"
+
+#~ msgid "1852"
+#~ msgstr "1852"
+
+#~ msgid "<entry>12</entry>"
+#~ msgstr "<entry>12</entry>"
+
+#~ msgid "<entry>226</entry>"
+#~ msgstr "<entry>226</entry>"
+
+#~ msgid "<entry>47</entry>"
+#~ msgstr "<entry>47</entry>"
+
+#~ msgid "<entry>10</entry>"
+#~ msgstr "<entry>10</entry>"
+
+#~ msgid "<entry>66</entry>"
+#~ msgstr "<entry>66</entry>"
+
+#~ msgid "<entry>87</entry>"
+#~ msgstr "<entry>87</entry>"
diff --git a/po/zh_CN/using-d-i.po b/po/zh_CN/using-d-i.po
index 0b8bde624..cac281f02 100644
--- a/po/zh_CN/using-d-i.po
+++ b/po/zh_CN/using-d-i.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-26 16:20+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-10-25 20:54+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -862,54 +862,14 @@ msgstr ""
 "功能放在 <keycap>Option</keycap> 健上(在大多数 Mac 键盘上标明 'alt')。其余地"
 "方这两种布局相似。"
 
-#. Tag: para
-#: using-d-i.xml:564
-#, no-c-format
-msgid ""
-"If you are installing on a system that has a Sun USB keyboard and have "
-"booted the installer with the default 2.4 kernel, the keyboard will not be "
-"identified correctly by the installation system. The installer will show you "
-"a list of Sun type keymaps to choose from, but selecting one of these will "
-"result in a non-working keyboard. If you are installing with the 2.6 kernel, "
-"there is no problem."
-msgstr ""
-"如果您的系统上使用 Sun USB 键盘，并且使用默认的 2.4 内核启动，该键盘将无法被"
-"安装系统识别。\n"
-"安装程序会提供 Sun 类型的 keymap 列表供选择，但是选择了其中一个会导致键盘无法"
-"使用。\n"
-"如果您使用 2.6 内核安装，便不会有问题。"
-
-#. Tag: para
-#: using-d-i.xml:573
-#, no-c-format
-msgid ""
-"To get a working keyboard, you should boot the installer with parameter "
-"<userinput>priority=medium</userinput>. When you get to keyboard "
-"selection<footnote> <para> If you are installing at default priority you "
-"should use the <userinput>Go Back</userinput> button to return to the "
-"installer menu when you are shown the list of Sun type keymaps. </para> </"
-"footnote>, choose <quote>No keyboard to configure</quote> if you have a "
-"keyboard with an American (US) layout, or choose <quote>USB keyboard</quote> "
-"if you have a keyboard with a localized layout. Selecting <quote>No keyboard "
-"to configure</quote> will leave the kernel keymap in place, which is correct "
-"for US keyboards."
-msgstr ""
-"为了让键盘可以工作，您应该给引导程序加上参数 <userinput>priority=medium</"
-"userinput>。当您看到键盘选择项<footnote> <para> 如果您使用默认的优先级安装，"
-"在显示 Sun 类型 keymap 之后，您应该使用 <userinput>Go Back</userinput> 按钮返"
-"回安装菜单。</para> </footnote>，如果您使用美式(US)键盘布局，请选 <quote>No "
-"keyboard to configure</quote> ，如果您使用本地化键盘布局，请选 <quote>USB "
-"keyboard</quote>。选择 <quote>No keyboard to configure</quote> 会使内核 "
-"keympa 放在合适的地方，这对美式键盘是正确的做法。"
-
 #. Tag: title
-#: using-d-i.xml:611
+#: using-d-i.xml:582
 #, no-c-format
 msgid "Looking for the Debian Installer ISO Image"
 msgstr "寻找 Debian 安装程序 ISO 映像"
 
 #. Tag: para
-#: using-d-i.xml:612
+#: using-d-i.xml:583
 #, no-c-format
 msgid ""
 "When installing via the <emphasis>hd-media</emphasis> method, there will be "
@@ -922,7 +882,7 @@ msgstr ""
 "command> 正是用来完成此任务。"
 
 #. Tag: para
-#: using-d-i.xml:619
+#: using-d-i.xml:590
 #, no-c-format
 msgid ""
 "At first, <command>iso-scan</command> automatically mounts all block devices "
@@ -949,7 +909,7 @@ msgstr ""
 "command> 搜索其它的映象。"
 
 #. Tag: para
-#: using-d-i.xml:636
+#: using-d-i.xml:607
 #, no-c-format
 msgid ""
 "In case the previous attempt to find an installer iso image fails, "
@@ -961,7 +921,7 @@ msgstr ""
 "行完整的搜索。这次不只查看最上级目录，而是真正地贯串整个文件系统。"
 
 #. Tag: para
-#: using-d-i.xml:643
+#: using-d-i.xml:614
 #, no-c-format
 msgid ""
 "If <command>iso-scan</command> does not discover your installer iso image, "
@@ -977,13 +937,13 @@ msgstr ""
 "Unix 用户可以在第二个控制台上完成这些动作，而毋须重新启动。"
 
 #. Tag: title
-#: using-d-i.xml:664
+#: using-d-i.xml:635
 #, no-c-format
 msgid "Configuring Network"
 msgstr "配置网络"
 
 #. Tag: para
-#: using-d-i.xml:666
+#: using-d-i.xml:637
 #, no-c-format
 msgid ""
 "As you enter this step, if the system detects that you have more than one "
@@ -1001,7 +961,7 @@ msgstr ""
 "citerefentry> man 页。"
 
 #. Tag: para
-#: using-d-i.xml:677
+#: using-d-i.xml:648
 #, no-c-format
 msgid ""
 "By default, &d-i; tries to configure your computer's network automatically "
@@ -1020,7 +980,7 @@ msgstr ""
 "此，如果您确定都正常，再试一次。"
 
 #. Tag: para
-#: using-d-i.xml:689
+#: using-d-i.xml:660
 #, no-c-format
 msgid ""
 "The manual network setup in turn asks you a number of questions about your "
@@ -1042,7 +1002,7 @@ msgstr ""
 "<xref linkend=\"needed-info\"/>。"
 
 #. Tag: para
-#: using-d-i.xml:703
+#: using-d-i.xml:674
 #, no-c-format
 msgid ""
 "Some technical details you might, or might not, find handy: the program "
@@ -1063,13 +1023,13 @@ msgstr ""
 "classname>，它用来一步步进行网络配置。"
 
 #. Tag: title
-#: using-d-i.xml:742
+#: using-d-i.xml:713
 #, no-c-format
 msgid "Partitioning and Mount Point Selection"
 msgstr "分区与选择挂载点"
 
 #. Tag: para
-#: using-d-i.xml:743
+#: using-d-i.xml:714
 #, no-c-format
 msgid ""
 "At this time, after hardware detection has been executed a final time, &d-i; "
@@ -1084,13 +1044,13 @@ msgstr ""
 "并为近似选项进行配置，比如 LVM 或 RAID 设备。"
 
 #. Tag: title
-#: using-d-i.xml:765
+#: using-d-i.xml:736
 #, no-c-format
 msgid "Partitioning Your Disks"
 msgstr "硬盘的分区"
 
 #. Tag: para
-#: using-d-i.xml:767
+#: using-d-i.xml:738
 #, no-c-format
 msgid ""
 "Now it is time to partition your disks. If you are uncomfortable with "
@@ -1101,7 +1061,7 @@ msgstr ""
 "的细节，请参阅 <xref linkend=\"partitioning\"/>。"
 
 #. Tag: para
-#: using-d-i.xml:773
+#: using-d-i.xml:744
 #, no-c-format
 msgid ""
 "First you will be given the opportunity to automatically partition either an "
@@ -1114,21 +1074,29 @@ msgstr ""
 "<guimenuitem>Manual</guimenuitem> 。"
 
 #. Tag: para
-#: using-d-i.xml:780
-#, no-c-format
+#: using-d-i.xml:751
+#, fuzzy, no-c-format
 msgid ""
 "If you choose guided partitioning, you may have three options: to create "
 "partitions directly on the hard disk (classic method), or to create them "
 "using Logical Volume Management (LVM), or to create them using encrypted "
-"LVM. Note: the option to use (encrypted) LVM may not be available on all "
-"architectures."
+"LVM<footnote>. <para> The installer will encrypt the LVM volume group using "
+"a 256 bit AES key and makes use of the kernel's <quote>dm-crypt</quote> "
+"support. </para> </footnote>."
 msgstr ""
 "如果您选择向导式分区，可以有三种选择：直接在硬盘上创建分区(经典方式)，或使用"
 "逻辑卷管理(LVM)，或使用加密 LVM。注意：(加密) LVM 的选项并不是在所有体系下都"
 "可用。"
 
 #. Tag: para
-#: using-d-i.xml:788
+#: using-d-i.xml:766
+#, no-c-format
+msgid ""
+"The option to use (encrypted) LVM may not be available on all architectures."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:771
 #, no-c-format
 msgid ""
 "When using LVM or encrypted LVM, the installer will create most partitions "
@@ -1142,7 +1110,18 @@ msgstr ""
 "大分区将无法读取，对您的(私有)数据提供了额外的安全性。"
 
 #. Tag: para
-#: using-d-i.xml:798
+#: using-d-i.xml:780
+#, no-c-format
+msgid ""
+"When using encrypted LVM, the installer will also automatically erase the "
+"disk by writing random data to it. This further improves security (as it "
+"makes it impossible to tell which parts of the disk are in use and also "
+"makes sure that any traces of previous installations are erased), but may "
+"take some time depending on the size of your disk."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:789
 #, no-c-format
 msgid ""
 "If you choose guided partitioning using LVM or encrypted LVM, some changes "
@@ -1157,7 +1136,7 @@ msgstr ""
 "安装程序会在写入磁盘之前让您确认。"
 
 #. Tag: para
-#: using-d-i.xml:808
+#: using-d-i.xml:799
 #, no-c-format
 msgid ""
 "If you choose guided partitioning (either classic or using (encrypted) LVM) "
@@ -1172,7 +1151,7 @@ msgstr ""
 "用的那块。排列的次序可能与您以前的不同。磁盘的尺寸将会帮助您识别它们。"
 
 #. Tag: para
-#: using-d-i.xml:817
+#: using-d-i.xml:808
 #, no-c-format
 msgid ""
 "Any data on the disk you select will eventually be lost, but you will always "
@@ -1186,7 +1165,7 @@ msgstr ""
 "销。"
 
 #. Tag: para
-#: using-d-i.xml:825
+#: using-d-i.xml:816
 #, no-c-format
 msgid ""
 "Next, you will be able to choose from the schemes listed in the table below. "
@@ -1202,73 +1181,73 @@ msgstr ""
 "给它 1GB 以上的空间(具体大小视所选的方式而不同)，那么向导式分区将以失败告终。"
 
 #. Tag: entry
-#: using-d-i.xml:841
+#: using-d-i.xml:832
 #, no-c-format
 msgid "Partitioning scheme"
 msgstr "分区方式"
 
 #. Tag: entry
-#: using-d-i.xml:842
+#: using-d-i.xml:833
 #, no-c-format
 msgid "Minimum space"
 msgstr "所需最小空间"
 
 #. Tag: entry
-#: using-d-i.xml:843
+#: using-d-i.xml:834
 #, no-c-format
 msgid "Created partitions"
 msgstr "所新建的分区"
 
 #. Tag: entry
-#: using-d-i.xml:849
+#: using-d-i.xml:840
 #, no-c-format
 msgid "All files in one partition"
 msgstr "所有文件在同一分区"
 
 #. Tag: entry
-#: using-d-i.xml:850
+#: using-d-i.xml:841
 #, no-c-format
 msgid "600MB"
 msgstr "600MB"
 
 #. Tag: entry
-#: using-d-i.xml:851
+#: using-d-i.xml:842
 #, no-c-format
 msgid "<filename>/</filename>, swap"
 msgstr "<filename>/</filename>, swap"
 
 #. Tag: entry
-#: using-d-i.xml:853
+#: using-d-i.xml:844
 #, no-c-format
 msgid "Separate /home partition"
 msgstr "建立 /home 分区"
 
 #. Tag: entry
-#: using-d-i.xml:854
+#: using-d-i.xml:845
 #, no-c-format
 msgid "500MB"
 msgstr "500MB"
 
 #. Tag: entry
-#: using-d-i.xml:855
+#: using-d-i.xml:846
 #, no-c-format
 msgid "<filename>/</filename>, <filename>/home</filename>, swap"
 msgstr "<filename>/</filename>, <filename>/home</filename>, swap"
 
 #. Tag: entry
-#: using-d-i.xml:859
+#: using-d-i.xml:850
 #, no-c-format
 msgid "Separate /home, /usr, /var and /tmp partitions"
 msgstr "分别建立 /home，/usr，/var 和 /tmp 分区"
 
 #. Tag: entry
-#: using-d-i.xml:860
+#: using-d-i.xml:851
 #, no-c-format
 msgid "<entry>1GB</entry>"
 msgstr "<entry>1GB</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:861
+#: using-d-i.xml:852
 #, no-c-format
 msgid ""
 "<filename>/</filename>, <filename>/home</filename>, <filename>/usr</"
@@ -1278,7 +1257,7 @@ msgstr ""
 "filename>, <filename>/var</filename>, <filename>/tmp</filename>, swap"
 
 #. Tag: para
-#: using-d-i.xml:870
+#: using-d-i.xml:861
 #, no-c-format
 msgid ""
 "If you choose guided partitioning using (encrypted) LVM, the installer will "
@@ -1291,7 +1270,7 @@ msgstr ""
 "之内。"
 
 #. Tag: para
-#: using-d-i.xml:876
+#: using-d-i.xml:867
 #, no-c-format
 msgid ""
 "If you choose guided partitioning for your IA64 system, there will be an "
@@ -1304,7 +1283,7 @@ msgstr ""
 "的一项，可以让您手动把某个分区作为 EFI 引导分区。"
 
 #. Tag: para
-#: using-d-i.xml:884
+#: using-d-i.xml:875
 #, no-c-format
 msgid ""
 "If you choose guided partitioning for your Alpha system, an additional, "
@@ -1315,7 +1294,7 @@ msgstr ""
 "始处，为 aboot boot loader 的保留空间。"
 
 #. Tag: para
-#: using-d-i.xml:890
+#: using-d-i.xml:881
 #, no-c-format
 msgid ""
 "After selecting a scheme, the next screen will show your new partition "
@@ -1326,7 +1305,7 @@ msgstr ""
 "区是否将被格式化，将以何种方式格式化，以及它们将被挂载到哪里的相关信息。"
 
 #. Tag: para
-#: using-d-i.xml:896
+#: using-d-i.xml:887
 #, no-c-format
 msgid ""
 "The list of partitions might look like this: <informalexample><screen>\n"
@@ -1374,7 +1353,7 @@ msgstr ""
 "创建这些特殊的设置，但使用手动方式分区的结果会有所不同。"
 
 #. Tag: para
-#: using-d-i.xml:909
+#: using-d-i.xml:900
 #, no-c-format
 msgid ""
 "This concludes the guided partitioning. If you are satisfied with the "
@@ -1392,7 +1371,7 @@ msgstr ""
 "后再次运行向导式分区，或者按照下面将要介绍进行手动分区。"
 
 #. Tag: para
-#: using-d-i.xml:919
+#: using-d-i.xml:910
 #, no-c-format
 msgid ""
 "A similar screen to the one shown just above will be displayed if you choose "
@@ -1407,7 +1386,7 @@ msgstr ""
 "本节的后面谈到。"
 
 #. Tag: para
-#: using-d-i.xml:927
+#: using-d-i.xml:918
 #, no-c-format
 msgid ""
 "If you select a pristine disk which has neither partitions nor free space on "
@@ -1420,7 +1399,7 @@ msgstr ""
 "的磁盘条目下会出现一个新行，上面写着 <quote>FREE SPACE</quote>。"
 
 #. Tag: para
-#: using-d-i.xml:935
+#: using-d-i.xml:926
 #, no-c-format
 msgid ""
 "If you select some free space, you will be offered to create new partition. "
@@ -1449,7 +1428,7 @@ msgstr ""
 "会自动退回到 <command>partman</command> 的主界面。"
 
 #. Tag: para
-#: using-d-i.xml:953
+#: using-d-i.xml:944
 #, no-c-format
 msgid ""
 "If you decide you want to change something about your partition, simply "
@@ -1468,7 +1447,7 @@ msgstr ""
 "这个菜单中，您还可以删除分区。"
 
 #. Tag: para
-#: using-d-i.xml:964
+#: using-d-i.xml:955
 #, no-c-format
 msgid ""
 "Be sure to create at least two partitions: one for the <emphasis>root</"
@@ -1483,7 +1462,7 @@ msgstr ""
 "的步骤，直到您改正了这个错误。"
 
 #. Tag: para
-#: using-d-i.xml:972
+#: using-d-i.xml:963
 #, no-c-format
 msgid ""
 "If you forget to select and format an EFI boot partition, <command>partman</"
@@ -1494,7 +1473,7 @@ msgstr ""
 "点，不让您继续操作，直到您划分出这样一个分区。"
 
 #. Tag: para
-#: using-d-i.xml:978
+#: using-d-i.xml:969
 #, no-c-format
 msgid ""
 "Capabilities of <command>partman</command> can be extended with installer "
@@ -1510,7 +1489,7 @@ msgstr ""
 "filename> 或者 <filename>partman-lvm</filename>)。"
 
 #. Tag: para
-#: using-d-i.xml:986
+#: using-d-i.xml:977
 #, no-c-format
 msgid ""
 "After you are satisfied with partitioning, select <guimenuitem>Finish "
@@ -1523,13 +1502,13 @@ msgstr ""
 "盘上进行的所有操作。此时，安装程序会让您确认 是否就照此分区。"
 
 #. Tag: title
-#: using-d-i.xml:1014
+#: using-d-i.xml:1005
 #, no-c-format
 msgid "Configuring Multidisk Device (Software RAID)"
 msgstr "配置多磁盘设备(Software RAID)"
 
 #. Tag: para
-#: using-d-i.xml:1015
+#: using-d-i.xml:1006
 #, no-c-format
 msgid ""
 "If you have more than one harddrive<footnote><para> To be honest, you can "
@@ -1547,7 +1526,7 @@ msgstr ""
 "<firstterm>software RAID</firstterm>)。"
 
 #. Tag: para
-#: using-d-i.xml:1029
+#: using-d-i.xml:1020
 #, no-c-format
 msgid ""
 "MD is basically a bunch of partitions located on different disks and "
@@ -1560,7 +1539,7 @@ msgstr ""
 "command> 格式化，分配挂载点，等等)。"
 
 #. Tag: para
-#: using-d-i.xml:1037
+#: using-d-i.xml:1028
 #, no-c-format
 msgid ""
 "The benefit you gain depends on a type of a MD device you are creating. "
@@ -1625,101 +1604,101 @@ msgstr ""
 "varlistentry> </variablelist> 总结："
 
 #. Tag: entry
-#: using-d-i.xml:1115
+#: using-d-i.xml:1106
 #, no-c-format
 msgid "Type"
 msgstr "类型"
 
 #. Tag: entry
-#: using-d-i.xml:1116
+#: using-d-i.xml:1107
 #, no-c-format
 msgid "Minimum Devices"
 msgstr "最少设备"
 
 #. Tag: entry
-#: using-d-i.xml:1117
+#: using-d-i.xml:1108
 #, no-c-format
 msgid "Spare Device"
 msgstr "备用设备"
 
 #. Tag: entry
-#: using-d-i.xml:1118
+#: using-d-i.xml:1109
 #, no-c-format
 msgid "Survives disk failure?"
 msgstr "幸免于磁盘损坏？"
 
 #. Tag: entry
-#: using-d-i.xml:1119
+#: using-d-i.xml:1110
 #, no-c-format
 msgid "Available Space"
 msgstr "可用空间"
 
 #. Tag: entry
-#: using-d-i.xml:1125
+#: using-d-i.xml:1116
 #, no-c-format
 msgid "RAID0"
 msgstr "RAID0"
 
 # index.docbook:1105, index.docbook:1113
 #. Tag: entry
-#: using-d-i.xml:1126 using-d-i.xml:1134
+#: using-d-i.xml:1117 using-d-i.xml:1125
 #, no-c-format
 msgid "<entry>2</entry>"
 msgstr "<entry>2</entry>"
 
 # index.docbook:1106, index.docbook:1107
 #. Tag: entry
-#: using-d-i.xml:1127 using-d-i.xml:1128
+#: using-d-i.xml:1118 using-d-i.xml:1119
 #, no-c-format
 msgid "<entry>no</entry>"
 msgstr "<entry>否</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1129
+#: using-d-i.xml:1120
 #, no-c-format
 msgid "Size of the smallest partition multiplied by number of devices in RAID"
 msgstr "容量为最小分区乘以 RAID 设备数"
 
 #. Tag: entry
-#: using-d-i.xml:1133
+#: using-d-i.xml:1124
 #, no-c-format
 msgid "RAID1"
 msgstr "RAID1"
 
 # index.docbook:1114, index.docbook:1122
 #. Tag: entry
-#: using-d-i.xml:1135 using-d-i.xml:1143
+#: using-d-i.xml:1126 using-d-i.xml:1134
 #, no-c-format
 msgid "optional"
 msgstr "可选"
 
 # index.docbook:1115, index.docbook:1123
 #. Tag: entry
-#: using-d-i.xml:1136 using-d-i.xml:1144
+#: using-d-i.xml:1127 using-d-i.xml:1135
 #, no-c-format
 msgid "<entry>yes</entry>"
 msgstr "<entry>是</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1137
+#: using-d-i.xml:1128
 #, no-c-format
 msgid "Size of the smallest partition in RAID"
 msgstr "容量为 RAID 最小分区"
 
 #. Tag: entry
-#: using-d-i.xml:1141
+#: using-d-i.xml:1132
 #, no-c-format
 msgid "RAID5"
 msgstr "RAID5"
 
 #. Tag: entry
-#: using-d-i.xml:1142
+#: using-d-i.xml:1133
 #, no-c-format
 msgid "<entry>3</entry>"
 msgstr "<entry>3</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1145
+#: using-d-i.xml:1136
 #, no-c-format
 msgid ""
 "Size of the smallest partition multiplied by (number of devices in RAID "
@@ -1727,7 +1706,7 @@ msgid ""
 msgstr "容量为最小分区乘以(RAID 设备数量减一)"
 
 #. Tag: para
-#: using-d-i.xml:1153
+#: using-d-i.xml:1144
 #, no-c-format
 msgid ""
 "If you want to know the whole truth about Software RAID, have a look at "
@@ -1737,7 +1716,7 @@ msgstr ""
 "howto;\">Software RAID HOWTO</ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:1158
+#: using-d-i.xml:1149
 #, no-c-format
 msgid ""
 "To create a MD device, you need to have the desired partitions it should "
@@ -1752,7 +1731,7 @@ msgstr ""
 "volume for RAID</guimenuitem> </menuchoice>。)"
 
 #. Tag: para
-#: using-d-i.xml:1167
+#: using-d-i.xml:1158
 #, no-c-format
 msgid ""
 "Support for MD is a relatively new addition to the installer. You may "
@@ -1767,7 +1746,7 @@ msgstr ""
 "验的用户，从 shell 手动地处理一些配置和安装步骤，也许会绕开这些问题"
 
 #. Tag: para
-#: using-d-i.xml:1176
+#: using-d-i.xml:1167
 #, no-c-format
 msgid ""
 "Next, you should choose <guimenuitem>Configure software RAID</guimenuitem> "
@@ -1787,7 +1766,7 @@ msgstr ""
 "RAID1)。后续操作会根据您选择的 MD 类型而定。"
 
 #. Tag: para
-#: using-d-i.xml:1189
+#: using-d-i.xml:1180
 #, no-c-format
 msgid ""
 "RAID0 is simple &mdash; you will be issued with the list of available RAID "
@@ -1798,7 +1777,7 @@ msgstr ""
 "组成 MD 的分区。"
 
 #. Tag: para
-#: using-d-i.xml:1196
+#: using-d-i.xml:1187
 #, no-c-format
 msgid ""
 "RAID1 is a bit more tricky. First, you will be asked to enter the number of "
@@ -1815,7 +1794,7 @@ msgstr ""
 "将不会允许您继续下去，直到纠正错误。"
 
 #. Tag: para
-#: using-d-i.xml:1208
+#: using-d-i.xml:1199
 #, no-c-format
 msgid ""
 "RAID5 has similar setup procedure as RAID1 with the exception that you need "
@@ -1825,7 +1804,7 @@ msgstr ""
 "区。"
 
 #. Tag: para
-#: using-d-i.xml:1216
+#: using-d-i.xml:1207
 #, fuzzy, no-c-format
 msgid ""
 "It is perfectly possible to have several types of MD at once. For example if "
@@ -1841,7 +1820,7 @@ msgstr ""
 "当可靠的 100 GB 分区用于 <filename>/home</filename>)。"
 
 #. Tag: para
-#: using-d-i.xml:1225
+#: using-d-i.xml:1216
 #, no-c-format
 msgid ""
 "After you setup MD devices to your liking, you can <guimenuitem>Finish</"
@@ -1854,13 +1833,13 @@ msgstr ""
 "的新 MD 设备并分配挂载点这样的属性。"
 
 #. Tag: title
-#: using-d-i.xml:1240
+#: using-d-i.xml:1231
 #, no-c-format
 msgid "Configuring the Logical Volume Manager (LVM)"
 msgstr "配置逻辑卷管理(LVM)"
 
 #. Tag: para
-#: using-d-i.xml:1241
+#: using-d-i.xml:1232
 #, no-c-format
 msgid ""
 "If you are working with computers at the level of system administrator or "
@@ -1874,7 +1853,7 @@ msgstr ""
 "移到或符号链接等方法来折腾。"
 
 #. Tag: para
-#: using-d-i.xml:1249
+#: using-d-i.xml:1240
 #, no-c-format
 msgid ""
 "To avoid the described situation you can use Logical Volume Manager (LVM). "
@@ -1891,7 +1870,7 @@ msgstr ""
 "firstterm>)。逻辑卷(当然底层是卷组)的亮点在于它可以跨越多个物理磁盘。"
 
 #. Tag: para
-#: using-d-i.xml:1259
+#: using-d-i.xml:1250
 #, no-c-format
 msgid ""
 "Now when you realize you need more space for your old 160GB <filename>/home</"
@@ -1909,7 +1888,7 @@ msgstr ""
 "url=\"&url-lvm-howto;\">LVM HOWTO</ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:1270
+#: using-d-i.xml:1261
 #, no-c-format
 msgid ""
 "LVM setup in &d-i; is quite simple and completely supported inside "
@@ -1924,7 +1903,7 @@ msgstr ""
 "<guimenuitem>physical volume for LVM</guimenuitem> </menuchoice>"
 
 #. Tag: para
-#: using-d-i.xml:1279
+#: using-d-i.xml:1270
 #, no-c-format
 msgid ""
 "When you return to the main <command>partman</command> screen, you will see "
@@ -1941,7 +1920,7 @@ msgstr ""
 "了 LVM 配置的小结。菜单项本身是与内容相关，只显示可用的操作。可能的操作有："
 
 #. Tag: para
-#: using-d-i.xml:1290
+#: using-d-i.xml:1281
 #, no-c-format
 msgid ""
 "<guimenuitem>Display configuration details</guimenuitem>: shows LVM device "
@@ -1951,43 +1930,43 @@ msgstr ""
 "名称和逻辑卷尺寸等"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1295
+#: using-d-i.xml:1286
 #, no-c-format
 msgid "Create volume group"
 msgstr "创建卷组"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1298
+#: using-d-i.xml:1289
 #, no-c-format
 msgid "Create logical volume"
 msgstr "创建逻辑卷"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1301
+#: using-d-i.xml:1292
 #, no-c-format
 msgid "Delete volume group"
 msgstr "删除卷组"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1304
+#: using-d-i.xml:1295
 #, no-c-format
 msgid "Delete logical volume"
 msgstr "删除逻辑卷"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1307
+#: using-d-i.xml:1298
 #, no-c-format
 msgid "Extend volume group"
 msgstr "扩充卷组"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1310
+#: using-d-i.xml:1301
 #, no-c-format
 msgid "Reduce volume group"
 msgstr "裁减卷组"
 
 #. Tag: para
-#: using-d-i.xml:1312
+#: using-d-i.xml:1303
 #, no-c-format
 msgid ""
 "<guimenuitem>Finish</guimenuitem>: return to the main <command>partman</"
@@ -1996,7 +1975,7 @@ msgstr ""
 "<guimenuitem>Finish</guimenuitem>: 返回 <command>partman</command> 主界面"
 
 #. Tag: para
-#: using-d-i.xml:1318
+#: using-d-i.xml:1309
 #, no-c-format
 msgid ""
 "Use the options in that menu to first create a volume group and then create "
@@ -2004,7 +1983,7 @@ msgid ""
 msgstr "使用该菜单内的选项首先创建卷组，然后在里面创建逻辑卷。"
 
 #. Tag: para
-#: using-d-i.xml:1324
+#: using-d-i.xml:1315
 #, no-c-format
 msgid ""
 "You can also use this menu to delete an existing LVM configuration from your "
@@ -2017,7 +1996,7 @@ msgstr ""
 "除它们就可以了。"
 
 #. Tag: para
-#: using-d-i.xml:1332
+#: using-d-i.xml:1323
 #, no-c-format
 msgid ""
 "After you return to the main <command>partman</command> screen, any created "
@@ -2028,13 +2007,13 @@ msgstr ""
 "通的分区一样(您也应该这样对待它们)。"
 
 #. Tag: title
-#: using-d-i.xml:1346
+#: using-d-i.xml:1337
 #, no-c-format
 msgid "Configuring Encrypted Volumes"
 msgstr "配置加密卷"
 
 #. Tag: para
-#: using-d-i.xml:1347
+#: using-d-i.xml:1338
 #, no-c-format
 msgid ""
 "&d-i; allows you to set up encrypted partitions. Every file you write to "
@@ -2052,7 +2031,7 @@ msgstr ""
 "许可以访问硬盘，但是没有正确的口令，硬盘上的数据看起来就像是随机的字符。"
 
 #. Tag: para
-#: using-d-i.xml:1359
+#: using-d-i.xml:1350
 #, no-c-format
 msgid ""
 "The two most important partitions to encrypt are: the home partition, where "
@@ -2075,7 +2054,7 @@ msgstr ""
 "加载内核。"
 
 #. Tag: para
-#: using-d-i.xml:1374
+#: using-d-i.xml:1365
 #, no-c-format
 msgid ""
 "Please note that the performance of encrypted partitions will be less than "
@@ -2087,7 +2066,7 @@ msgstr ""
 "密和解密。性能将与您的 CPU 速度、选择的加密算法和密钥长度紧密相关。"
 
 #. Tag: para
-#: using-d-i.xml:1381
+#: using-d-i.xml:1372
 #, no-c-format
 msgid ""
 "To use encryption, you have to create a new partition by selecting some free "
@@ -2105,7 +2084,7 @@ msgstr ""
 "guimenu> </menuchoice> 选项。菜单将包含分区的加密选项。"
 
 #. Tag: para
-#: using-d-i.xml:1392
+#: using-d-i.xml:1383
 #, no-c-format
 msgid ""
 "&d-i; supports several encryption methods. The default method is "
@@ -2120,7 +2099,7 @@ msgstr ""
 "使用默认的方法。"
 
 #. Tag: para
-#: using-d-i.xml:1404
+#: using-d-i.xml:1395
 #, no-c-format
 msgid ""
 "First, let's have a look at the options available when you select "
@@ -2133,13 +2112,13 @@ msgstr ""
 "的安全考虑的选择。"
 
 #. Tag: term
-#: using-d-i.xml:1414
+#: using-d-i.xml:1405
 #, no-c-format
 msgid "Encryption: <userinput>aes</userinput>"
 msgstr "Encryption: <userinput>aes</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1416
+#: using-d-i.xml:1407
 #, no-c-format
 msgid ""
 "This option lets you select the encryption algorithm (<firstterm>cipher</"
@@ -2162,13 +2141,13 @@ msgstr ""
 "息。"
 
 #. Tag: term
-#: using-d-i.xml:1434
+#: using-d-i.xml:1425
 #, no-c-format
 msgid "Key size: <userinput>256</userinput>"
 msgstr "Key size: <userinput>256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1436
+#: using-d-i.xml:1427
 #, no-c-format
 msgid ""
 "Here you can specify the length of the encryption key. With a larger key "
@@ -2180,13 +2159,13 @@ msgstr ""
 "加长度自然会降低性能。cipher 决定可用的密钥长度。"
 
 #. Tag: term
-#: using-d-i.xml:1448
+#: using-d-i.xml:1439
 #, no-c-format
 msgid "IV algorithm: <userinput>cbc-essiv:sha256</userinput>"
 msgstr "IV algorithm: <userinput>cbc-essiv:sha256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1450
+#: using-d-i.xml:1441
 #, no-c-format
 msgid ""
 "The <firstterm>Initialization Vector</firstterm> or <firstterm>IV</"
@@ -2202,7 +2181,7 @@ msgstr ""
 "复模板推断信息。"
 
 #. Tag: para
-#: using-d-i.xml:1460
+#: using-d-i.xml:1451
 #, no-c-format
 msgid ""
 "From the provided alternatives, the default <userinput>cbc-essiv:sha256</"
@@ -2215,25 +2194,25 @@ msgstr ""
 "才使用其他的算法。"
 
 #. Tag: term
-#: using-d-i.xml:1472
+#: using-d-i.xml:1463
 #, no-c-format
 msgid "Encryption key: <userinput>Passphrase</userinput>"
 msgstr "Encryption key: <userinput>Passphrase</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1474
+#: using-d-i.xml:1465
 #, no-c-format
 msgid "Here you can choose the type of the encryption key for this partition."
 msgstr "这里您可以为分区选择所使用的加密密钥类型。"
 
 #. Tag: term
-#: using-d-i.xml:1480
+#: using-d-i.xml:1471
 #, no-c-format
 msgid "Passphrase"
 msgstr "Passphrase"
 
 #. Tag: para
-#: using-d-i.xml:1481
+#: using-d-i.xml:1472
 #, no-c-format
 msgid ""
 "The encryption key will be computed<footnote> <para> Using a passphrase as "
@@ -2246,13 +2225,13 @@ msgstr ""
 "使用时要求输入。"
 
 #. Tag: term
-#: using-d-i.xml:1496 using-d-i.xml:1589
+#: using-d-i.xml:1487 using-d-i.xml:1580
 #, no-c-format
 msgid "Random key"
 msgstr "Random key"
 
 #. Tag: para
-#: using-d-i.xml:1497
+#: using-d-i.xml:1488
 #, no-c-format
 msgid ""
 "A new encryption key will be generated from random data each time you try to "
@@ -2267,7 +2246,7 @@ msgstr ""
 "面临暴力破解，但是除非加密算法中有未知的弱点，这辈子也不会被攻破。)"
 
 #. Tag: para
-#: using-d-i.xml:1506
+#: using-d-i.xml:1497
 #, no-c-format
 msgid ""
 "Random keys are useful for swap partitions because you do not need to bother "
@@ -2284,13 +2263,13 @@ msgstr ""
 "复写入到交换分区的数据。"
 
 #. Tag: term
-#: using-d-i.xml:1525 using-d-i.xml:1602
+#: using-d-i.xml:1516 using-d-i.xml:1593
 #, no-c-format
 msgid "Erase data: <userinput>yes</userinput>"
 msgstr "Erase data: <userinput>yes</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1527
+#: using-d-i.xml:1518
 #, no-c-format
 msgid ""
 "Determines whether the content of this partition should be overwritten with "
@@ -2308,7 +2287,7 @@ msgstr ""
 "备上的数据。</para></footnote>。"
 
 #. Tag: para
-#: using-d-i.xml:1547
+#: using-d-i.xml:1538
 #, no-c-format
 msgid ""
 "If you select <menuchoice> <guimenu>Encryption method:</guimenu> "
@@ -2320,13 +2299,13 @@ msgstr ""
 "下面内容："
 
 #. Tag: term
-#: using-d-i.xml:1556
+#: using-d-i.xml:1547
 #, no-c-format
 msgid "Encryption: <userinput>AES256</userinput>"
 msgstr "Encryption: <userinput>AES256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1558
+#: using-d-i.xml:1549
 #, no-c-format
 msgid ""
 "For loop-AES, unlike dm-crypt, the options for cipher and key size are "
@@ -2337,25 +2316,25 @@ msgstr ""
 "时选取。请查阅前面关于 cipher 和密钥长度的章节了解更多信息。"
 
 #. Tag: term
-#: using-d-i.xml:1568
+#: using-d-i.xml:1559
 #, no-c-format
 msgid "Encryption key: <userinput>Keyfile (GnuPG)</userinput>"
 msgstr "Encryption key: <userinput>Keyfile (GnuPG)</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1570
+#: using-d-i.xml:1561
 #, no-c-format
 msgid "Here you can select the type of the encryption key for this partition."
 msgstr "这里您可以为分区选择加密密钥的类型。"
 
 #. Tag: term
-#: using-d-i.xml:1576
+#: using-d-i.xml:1567
 #, no-c-format
 msgid "Keyfile (GnuPG)"
 msgstr "Keyfile (GnuPG)"
 
 #. Tag: para
-#: using-d-i.xml:1577
+#: using-d-i.xml:1568
 #, no-c-format
 msgid ""
 "The encryption key will be generated from random data during the "
@@ -2367,19 +2346,19 @@ msgstr ""
 "application> 加密。要使用它，您需要输入正确的 passphrase (在以后会要求提供)。"
 
 #. Tag: para
-#: using-d-i.xml:1590
+#: using-d-i.xml:1581
 #, no-c-format
 msgid "Please see the the section on random keys above."
 msgstr "请查阅前面有关随机密钥的章节。"
 
 #. Tag: para
-#: using-d-i.xml:1604
+#: using-d-i.xml:1595
 #, no-c-format
 msgid "Please see the the section on erasing data above."
 msgstr "请查阅前面有关删除数据的章节。"
 
 #. Tag: para
-#: using-d-i.xml:1613
+#: using-d-i.xml:1604
 #, no-c-format
 msgid ""
 "Please note that the <emphasis>graphical</emphasis> version of the installer "
@@ -2391,7 +2370,7 @@ msgstr ""
 "对于加密，您将只能使用 <emphasis>passphrases</emphasis> 作为加密密钥建立卷。"
 
 #. Tag: para
-#: using-d-i.xml:1620
+#: using-d-i.xml:1611
 #, no-c-format
 msgid ""
 "After you have selected the desired parameters for your encrypted "
@@ -2406,7 +2385,7 @@ msgstr ""
 "标记分区上的数据，以及写新分区表等动作。对于大的分区，这会花一些时间。"
 
 #. Tag: para
-#: using-d-i.xml:1631
+#: using-d-i.xml:1622
 #, no-c-format
 msgid ""
 "Next you will be asked to enter a passphrase for partitions configured to "
@@ -2420,7 +2399,7 @@ msgstr ""
 "生日、爱好、宠物的名字、以及家里其他成员的名字，等等)。"
 
 #. Tag: para
-#: using-d-i.xml:1640
+#: using-d-i.xml:1631
 #, no-c-format
 msgid ""
 "Before you input any passphrases, you should have made sure that your "
@@ -2440,7 +2419,7 @@ msgstr ""
 "所选择的键盘布局未能正确建立，而且是在为根文件系统输入 passphrase 的时候。"
 
 #. Tag: para
-#: using-d-i.xml:1653
+#: using-d-i.xml:1644
 #, no-c-format
 msgid ""
 "If you selected to use methods other than a passphrase to create encryption "
@@ -2459,7 +2438,7 @@ msgstr ""
 "程在每个要加密的分区重复进行。"
 
 #. Tag: para
-#: using-d-i.xml:1669
+#: using-d-i.xml:1660
 #, no-c-format
 msgid ""
 "After returning to the main partitioning menu, you will see all encrypted "
@@ -2490,7 +2469,7 @@ msgstr ""
 "您不合适，可以进行修改。"
 
 #. Tag: para
-#: using-d-i.xml:1682
+#: using-d-i.xml:1673
 #, no-c-format
 msgid ""
 "One thing to note here are the identifiers in parentheses "
@@ -2507,7 +2486,7 @@ msgstr ""
 "的差异，将在后面的 <xref linkend=\"mount-encrypted-volumes\"/> 说明。"
 
 #. Tag: para
-#: using-d-i.xml:1692
+#: using-d-i.xml:1683
 #, no-c-format
 msgid ""
 "Once you are satisfied with the partitioning scheme, continue with the "
@@ -2515,13 +2494,13 @@ msgid ""
 msgstr "当您满意分区之后，可以继续安装过程。"
 
 #. Tag: title
-#: using-d-i.xml:1703
+#: using-d-i.xml:1694
 #, no-c-format
 msgid "Setting up the System"
 msgstr "建立系统"
 
 #. Tag: para
-#: using-d-i.xml:1704
+#: using-d-i.xml:1695
 #, no-c-format
 msgid ""
 "After partitioning the installer asks a few more questions that will be used "
@@ -2529,13 +2508,13 @@ msgid ""
 msgstr "分区之后，安装程序还会询问一些问题用于建立系统。"
 
 #. Tag: title
-#: using-d-i.xml:1716
+#: using-d-i.xml:1707
 #, no-c-format
 msgid "Configuring Your Time Zone"
 msgstr "配置您的时区"
 
 #. Tag: para
-#: using-d-i.xml:1718
+#: using-d-i.xml:1709
 #, no-c-format
 msgid ""
 "Depending on the location selected at the beginning of the installation "
@@ -2547,13 +2526,13 @@ msgstr ""
 "您的位置只对应一个时区，那么系统就不会询问而直接使用该时区。"
 
 #. Tag: title
-#: using-d-i.xml:1734
+#: using-d-i.xml:1725
 #, no-c-format
 msgid "Configuring the Clock"
 msgstr "配置时钟"
 
 #. Tag: para
-#: using-d-i.xml:1736
+#: using-d-i.xml:1727
 #, no-c-format
 msgid ""
 "The installer might ask you if the computer's clock is set to UTC. Normally "
@@ -2565,7 +2544,7 @@ msgstr ""
 "装程序依据是否有其他系统已经安装这类事情，来决定时钟要不要设为 UTC。"
 
 #. Tag: para
-#: using-d-i.xml:1743
+#: using-d-i.xml:1734
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -2581,7 +2560,7 @@ msgstr ""
 "为本地时间。如果您需要多重引导，请选择本地时间而不是 GMT。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:1754
+#: using-d-i.xml:1745
 #, no-c-format
 msgid ""
 "Note that the installer does not currently allow you to actually set the "
@@ -2593,19 +2572,19 @@ msgstr ""
 "或者以前没有设为 UTC 时，设置时钟到当前的时间。"
 
 #. Tag: title
-#: using-d-i.xml:1770
+#: using-d-i.xml:1761
 #, no-c-format
 msgid "Setting Up Users And Passwords"
 msgstr "设置用户和密码"
 
 #. Tag: title
-#: using-d-i.xml:1773
+#: using-d-i.xml:1764
 #, no-c-format
 msgid "Set the Root Password"
 msgstr "设置 root 密码"
 
 #. Tag: para
-#: using-d-i.xml:1775
+#: using-d-i.xml:1766
 #, no-c-format
 msgid ""
 "The <emphasis>root</emphasis> account is also called the <emphasis>super-"
@@ -2618,7 +2597,7 @@ msgstr ""
 "管理，而且使用时间应该尽可能短。"
 
 #. Tag: para
-#: using-d-i.xml:1783
+#: using-d-i.xml:1774
 #, no-c-format
 msgid ""
 "Any password you create should contain at least 6 characters, and should "
@@ -2632,7 +2611,7 @@ msgstr ""
 "小心。请避免采用能够在字典中查到的单词或者很容易猜测的个人信息。"
 
 #. Tag: para
-#: using-d-i.xml:1791
+#: using-d-i.xml:1782
 #, no-c-format
 msgid ""
 "If anyone ever tells you they need your root password, be extremely wary. "
@@ -2643,13 +2622,13 @@ msgstr ""
 "理员，否则您通常不应该将超级用户密码交给别人。"
 
 #. Tag: title
-#: using-d-i.xml:1801
+#: using-d-i.xml:1792
 #, no-c-format
 msgid "Create an Ordinary User"
 msgstr "创建一个普通用户"
 
 #. Tag: para
-#: using-d-i.xml:1803
+#: using-d-i.xml:1794
 #, no-c-format
 msgid ""
 "The system will ask you whether you wish to create an ordinary user account "
@@ -2662,7 +2641,7 @@ msgstr ""
 "用。"
 
 #. Tag: para
-#: using-d-i.xml:1810
+#: using-d-i.xml:1801
 #, no-c-format
 msgid ""
 "Why not? Well, one reason to avoid using root's privileges is that it is "
@@ -2680,7 +2659,7 @@ msgstr ""
 "这方面的内容，建议您找一本进行学习。"
 
 #. Tag: para
-#: using-d-i.xml:1820
+#: using-d-i.xml:1811
 #, no-c-format
 msgid ""
 "You will first be prompted for the user's full name. Then you'll be asked "
@@ -2692,7 +2671,7 @@ msgstr ""
 "要求，并为缺省值。最后，您将要求输入该帐号的密码。"
 
 #. Tag: para
-#: using-d-i.xml:1827
+#: using-d-i.xml:1818
 #, no-c-format
 msgid ""
 "If at any point after installation you would like to create another account, "
@@ -2702,13 +2681,13 @@ msgstr ""
 "令。"
 
 #. Tag: title
-#: using-d-i.xml:1839
+#: using-d-i.xml:1830
 #, no-c-format
 msgid "Installing the Base System"
 msgstr "安装基本系统"
 
 #. Tag: para
-#: using-d-i.xml:1840
+#: using-d-i.xml:1831
 #, no-c-format
 msgid ""
 "Although this stage is the least problematic, it consumes a significant "
@@ -2720,13 +2699,13 @@ msgstr ""
 "果您用较慢的计算机或网络，这要花费好一会儿时间。"
 
 #. Tag: title
-#: using-d-i.xml:1854
+#: using-d-i.xml:1845
 #, no-c-format
 msgid "Base System Installation"
 msgstr "基本系统安装"
 
 #. Tag: para
-#: using-d-i.xml:1856
+#: using-d-i.xml:1847
 #, no-c-format
 msgid ""
 "During the Base installation, package unpacking and setup messages are "
@@ -2741,7 +2720,7 @@ msgstr ""
 "keycap><keycap>F1</keycap></keycombo>。"
 
 #. Tag: para
-#: using-d-i.xml:1866
+#: using-d-i.xml:1857
 #, no-c-format
 msgid ""
 "The unpack/setup messages generated by the base installation are saved in "
@@ -2752,7 +2731,7 @@ msgstr ""
 "<filename>/var/log/syslog</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:1872
+#: using-d-i.xml:1863
 #, no-c-format
 msgid ""
 "As part of the installation, a Linux kernel will be installed. At the "
@@ -2764,13 +2743,13 @@ msgstr ""
 "您硬件最匹配的内核。在较低的优先级下，您可以从列表中选择一个有效的内核。"
 
 #. Tag: title
-#: using-d-i.xml:1885
+#: using-d-i.xml:1876
 #, no-c-format
 msgid "Installing Additional Software"
 msgstr "安装额外的软件"
 
 #. Tag: para
-#: using-d-i.xml:1886
+#: using-d-i.xml:1877
 #, no-c-format
 msgid ""
 "After the base system is installed, you have a usable but limited system. "
@@ -2784,13 +2763,13 @@ msgstr ""
 "许比安装基本系统还要花时间。"
 
 #. Tag: title
-#: using-d-i.xml:1900
+#: using-d-i.xml:1891
 #, no-c-format
 msgid "Configuring apt"
 msgstr "配置 apt"
 
 #. Tag: para
-#: using-d-i.xml:1902
+#: using-d-i.xml:1893
 #, no-c-format
 msgid ""
 "The main means that people use to install packages on their system is via a "
@@ -2819,7 +2798,7 @@ msgstr ""
 "的用户界面下集成了一些其他特性(搜索包与状态检验)。"
 
 #. Tag: para
-#: using-d-i.xml:1926
+#: using-d-i.xml:1917
 #, no-c-format
 msgid ""
 "<command>apt</command> must be configured so that it knows where to retrieve "
@@ -2834,13 +2813,13 @@ msgstr ""
 "list</filename> 文件里面，安装完成后您可以检查它并编辑成自己喜欢的地方。"
 
 #. Tag: title
-#: using-d-i.xml:1942
+#: using-d-i.xml:1933
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr "选择和安装软件"
 
 #. Tag: para
-#: using-d-i.xml:1944
+#: using-d-i.xml:1935
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -2855,7 +2834,7 @@ msgstr ""
 "算机应对各种任务。"
 
 #. Tag: para
-#: using-d-i.xml:1953
+#: using-d-i.xml:1944
 #, no-c-format
 msgid ""
 "So, you have the ability to choose <emphasis>tasks</emphasis> first, and "
@@ -2885,7 +2864,7 @@ msgstr ""
 "\"tasksel-size-list\"/> 列出各任务所需的空间。"
 
 #. Tag: para
-#: using-d-i.xml:1978
+#: using-d-i.xml:1969
 #, no-c-format
 msgid ""
 "Once you've selected your tasks, select <guibutton>Ok</guibutton>. At this "
@@ -2895,7 +2874,7 @@ msgstr ""
 "command> 将安装您选中的软件包。"
 
 #. Tag: para
-#: using-d-i.xml:1985
+#: using-d-i.xml:1976
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -2903,7 +2882,7 @@ msgid ""
 msgstr "在安装程序的标准用户界面下，您可以使用空格键切换任务的选择。"
 
 #. Tag: para
-#: using-d-i.xml:1992
+#: using-d-i.xml:1983
 #, no-c-format
 msgid ""
 "Note that some tasks may be pre-selected based on the characteristics of the "
@@ -2915,7 +2894,7 @@ msgstr ""
 "择。此时甚至可以不选中任何任务。"
 
 #. Tag: para
-#: using-d-i.xml:2000
+#: using-d-i.xml:1991
 #, no-c-format
 msgid ""
 "Each package you selected with <command>tasksel</command> is downloaded, "
@@ -2928,13 +2907,13 @@ msgstr ""
 "序需要用户提供信息，它会在此过程中给出提示。"
 
 #. Tag: title
-#: using-d-i.xml:2009
+#: using-d-i.xml:2000
 #, no-c-format
 msgid "Configuring Your Mail Transport Agent"
 msgstr "配置您的邮件传输代理(MTA)"
 
 #. Tag: para
-#: using-d-i.xml:2011
+#: using-d-i.xml:2002
 #, no-c-format
 msgid ""
 "Today, email is a very important part of many people's life, so it's no "
@@ -2948,7 +2927,7 @@ msgstr ""
 "<command>exim4</command>。这是一个非常小巧、灵活并且容易理解的工具。"
 
 #. Tag: para
-#: using-d-i.xml:2019
+#: using-d-i.xml:2010
 #, no-c-format
 msgid ""
 "You may ask if this is needed even if your computer is not connected to any "
@@ -2962,7 +2941,7 @@ msgstr ""
 "送的。"
 
 #. Tag: para
-#: using-d-i.xml:2027
+#: using-d-i.xml:2018
 #, no-c-format
 msgid ""
 "So on the first screen you will be presented with several common mail "
@@ -2972,13 +2951,13 @@ msgstr ""
 "的。"
 
 #. Tag: term
-#: using-d-i.xml:2036
+#: using-d-i.xml:2027
 #, no-c-format
 msgid "internet site"
 msgstr "互联网站"
 
 #. Tag: para
-#: using-d-i.xml:2037
+#: using-d-i.xml:2028
 #, no-c-format
 msgid ""
 "Your system is connected to a network and your mail is sent and received "
@@ -2990,13 +2969,13 @@ msgstr ""
 "会询问您一些基本问题，如：您的机器的邮件名称、您接受或转发邮件的域等等。"
 
 #. Tag: term
-#: using-d-i.xml:2048
+#: using-d-i.xml:2039
 #, no-c-format
 msgid "mail sent by smarthost"
 msgstr "用 smarthost 发信"
 
 #. Tag: para
-#: using-d-i.xml:2049
+#: using-d-i.xml:2040
 #, no-c-format
 msgid ""
 "In this scenario is your outgoing mail forwarded to another machine, called "
@@ -3012,13 +2991,13 @@ msgstr ""
 "将邮件从 smarthost 下载回来。这一选项通常适合拨号用户。"
 
 #. Tag: term
-#: using-d-i.xml:2062
+#: using-d-i.xml:2053
 #, no-c-format
 msgid "local delivery only"
 msgstr "仅在本地投递"
 
 #. Tag: para
-#: using-d-i.xml:2063
+#: using-d-i.xml:2054
 #, no-c-format
 msgid ""
 "Your system is not on a network and mail is sent or received only between "
@@ -3034,13 +3013,13 @@ msgstr ""
 "题，因此这一选项也非常适合新手。"
 
 #. Tag: term
-#: using-d-i.xml:2076
+#: using-d-i.xml:2067
 #, no-c-format
 msgid "no configuration at this time"
 msgstr "现在不进行配置"
 
 #. Tag: para
-#: using-d-i.xml:2077
+#: using-d-i.xml:2068
 #, no-c-format
 msgid ""
 "Choose this if you are absolutely convinced you know what you are doing. "
@@ -3053,7 +3032,7 @@ msgstr ""
 "工具发来的重要信息。"
 
 #. Tag: para
-#: using-d-i.xml:2088
+#: using-d-i.xml:2079
 #, no-c-format
 msgid ""
 "If none of these scenarios suits your needs, or if you need a finer setup, "
@@ -3068,13 +3047,13 @@ msgstr ""
 "filename> 的资料。"
 
 #. Tag: title
-#: using-d-i.xml:2103
+#: using-d-i.xml:2094
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "创建启动系统"
 
 #. Tag: para
-#: using-d-i.xml:2105
+#: using-d-i.xml:2096
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -3087,7 +3066,7 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/>。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2113
+#: using-d-i.xml:2104
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3100,13 +3079,13 @@ msgstr ""
 "它们会依系统甚至是子系统而变化。您应该参考启动引导器的文档了解更多信息。"
 
 #. Tag: title
-#: using-d-i.xml:2128
+#: using-d-i.xml:2119
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "检测其他的操作系统"
 
 #. Tag: para
-#: using-d-i.xml:2130
+#: using-d-i.xml:2121
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -3120,7 +3099,7 @@ msgstr ""
 "计算机也将配置为可以启动其他操作系统。"
 
 #. Tag: para
-#: using-d-i.xml:2138
+#: using-d-i.xml:2129
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3134,13 +3113,13 @@ msgstr ""
 "理器的文档了解更多信息。"
 
 #. Tag: title
-#: using-d-i.xml:2156
+#: using-d-i.xml:2147
 #, no-c-format
 msgid "Install <command>aboot</command> on a Hard Disk"
 msgstr "安装 <command>aboot</command> 到硬盘上"
 
 #. Tag: para
-#: using-d-i.xml:2157
+#: using-d-i.xml:2148
 #, no-c-format
 msgid ""
 "If you have booted from SRM, if you select this option, the installer will "
@@ -3160,13 +3139,13 @@ msgstr ""
 "Linux。"
 
 #. Tag: title
-#: using-d-i.xml:2177
+#: using-d-i.xml:2168
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2178
+#: using-d-i.xml:2169
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -3181,19 +3160,19 @@ msgstr ""
 "<command>PALO</command> 能真正地读 Linux 分区。"
 
 #. Tag: para
-#: using-d-i.xml:2187
+#: using-d-i.xml:2178
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2199
+#: using-d-i.xml:2190
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "硬盘上 <command>Grub</command> Boot Loader 的安装"
 
 #. Tag: para
-#: using-d-i.xml:2201
+#: using-d-i.xml:2192
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -3204,7 +3183,7 @@ msgstr ""
 "定的 boot loader，它对新手来说是个不错的缺省选择。对老鸟来说，它也同样适合。"
 
 #. Tag: para
-#: using-d-i.xml:2207
+#: using-d-i.xml:2198
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -3216,7 +3195,7 @@ msgstr ""
 "息，请参阅 grub 的手册。"
 
 #. Tag: para
-#: using-d-i.xml:2213
+#: using-d-i.xml:2204
 #, no-c-format
 msgid ""
 "If you do not want to install grub at all, use the Back button to get to the "
@@ -3226,13 +3205,13 @@ msgstr ""
 "动引导器。"
 
 #. Tag: title
-#: using-d-i.xml:2227
+#: using-d-i.xml:2218
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "硬盘上 <command>LILO</command> Boot Loader 的安装"
 
 #. Tag: para
-#: using-d-i.xml:2229
+#: using-d-i.xml:2220
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3248,7 +3227,7 @@ msgstr ""
 "HOWTO</ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:2239
+#: using-d-i.xml:2230
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3261,7 +3240,7 @@ msgstr ""
 "统。"
 
 #. Tag: para
-#: using-d-i.xml:2247
+#: using-d-i.xml:2238
 #, no-c-format
 msgid ""
 "&d-i; presents you three choices where to install the <command>LILO</"
@@ -3269,13 +3248,13 @@ msgid ""
 msgstr "&d-i; 提供给您三种选择来安装 <command>LILO</command> 启动加载器："
 
 #. Tag: term
-#: using-d-i.xml:2254
+#: using-d-i.xml:2245
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "主引导区(MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2254
+#: using-d-i.xml:2245
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3283,13 +3262,13 @@ msgid ""
 msgstr "这种方式 <command>LILO</command> 将完全控制启动过程。"
 
 #. Tag: term
-#: using-d-i.xml:2261
+#: using-d-i.xml:2252
 #, no-c-format
 msgid "new Debian partition"
 msgstr "新 Debian 分区"
 
 #. Tag: para
-#: using-d-i.xml:2261
+#: using-d-i.xml:2252
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3300,13 +3279,13 @@ msgstr ""
 "新 Debian 分区的起始位置，并能作为第二 boot loader。"
 
 #. Tag: term
-#: using-d-i.xml:2270
+#: using-d-i.xml:2261
 #, no-c-format
 msgid "Other choice"
 msgstr "其它选择"
 
 #. Tag: para
-#: using-d-i.xml:2270
+#: using-d-i.xml:2261
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3323,7 +3302,7 @@ msgstr ""
 "<filename>/dev/sda</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2282
+#: using-d-i.xml:2273
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3339,13 +3318,13 @@ msgstr ""
 "息，请参阅 <xref linkend=\"reactivating-win\"/>。"
 
 #. Tag: title
-#: using-d-i.xml:2299
+#: using-d-i.xml:2290
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "安装 <command>ELILO</command> Boot Loader 到硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2301
+#: using-d-i.xml:2292
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3370,7 +3349,7 @@ msgstr ""
 "和启动 Linux 内核的工作。"
 
 #. Tag: para
-#: using-d-i.xml:2317
+#: using-d-i.xml:2308
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3385,13 +3364,13 @@ msgstr ""
 "<emphasis>root</emphasis> 文件系统相同的磁盘。"
 
 #. Tag: title
-#: using-d-i.xml:2329
+#: using-d-i.xml:2320
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "选择正确的分区！"
 
 #. Tag: para
-#: using-d-i.xml:2331
+#: using-d-i.xml:2322
 #, no-c-format
 msgid ""
 "The criteria for selecting a partition is that it is FAT format filesystem "
@@ -3407,13 +3386,13 @@ msgstr ""
 "有内容！"
 
 #. Tag: title
-#: using-d-i.xml:2346
+#: using-d-i.xml:2337
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI 分区内容"
 
 #. Tag: para
-#: using-d-i.xml:2348
+#: using-d-i.xml:2339
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -3439,13 +3418,13 @@ msgstr ""
 "间，系统更新或重新配置，文件系统中也许会有其他文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2370
+#: using-d-i.xml:2361
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2371
+#: using-d-i.xml:2362
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -3456,13 +3435,13 @@ msgstr ""
 "filename> 的复制，其文件名重写成 EFI 分区上的文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2380
+#: using-d-i.xml:2371
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2381
+#: using-d-i.xml:2372
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -3475,13 +3454,13 @@ msgstr ""
 "<quote>EFI Boot Manager</quote> 命令菜单。"
 
 #. Tag: filename
-#: using-d-i.xml:2391
+#: using-d-i.xml:2382
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2392
+#: using-d-i.xml:2383
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -3494,13 +3473,13 @@ msgstr ""
 "filename> 符号链接 <filename>/initrd.img</filename> 指向的文件。"
 
 #. Tag: filename
-#: using-d-i.xml:2404
+#: using-d-i.xml:2395
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2405
+#: using-d-i.xml:2396
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -3511,13 +3490,13 @@ msgstr ""
 "任何本地修改在下次 <filename>/usr/sbin/elilo</filename> 运行时将丢失。"
 
 #. Tag: filename
-#: using-d-i.xml:2415
+#: using-d-i.xml:2406
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2416
+#: using-d-i.xml:2407
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -3530,13 +3509,13 @@ msgstr ""
 "<filename>/vmlinuz</filename> 指向的文件。"
 
 #. Tag: title
-#: using-d-i.xml:2436
+#: using-d-i.xml:2427
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr "<command>arcboot</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2437
+#: using-d-i.xml:2428
 #, no-c-format
 msgid ""
 "The boot loader on SGI machines is <command>arcboot</command>. It has to be "
@@ -3576,13 +3555,13 @@ msgstr ""
 "</screen></informalexample> ，然后键入 <command>boot</command>。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2456
+#: using-d-i.xml:2447
 #, no-c-format
 msgid "scsi"
 msgstr "scsi"
 
 #. Tag: para
-#: using-d-i.xml:2457
+#: using-d-i.xml:2448
 #, no-c-format
 msgid ""
 "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the "
@@ -3590,13 +3569,13 @@ msgid ""
 msgstr "是启动的 SCSI 总线，<userinput>0</userinput> 为板载控制器"
 
 #. Tag: replaceable
-#: using-d-i.xml:2465
+#: using-d-i.xml:2456
 #, no-c-format
 msgid "disk"
 msgstr "disk"
 
 #. Tag: para
-#: using-d-i.xml:2466
+#: using-d-i.xml:2457
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>arcboot</command> is "
@@ -3605,13 +3584,13 @@ msgstr "硬盘的 SCSI ID，<command>arcboot</command> 安装在其上"
 
 # index.docbook:1643, index.docbook:1712
 #. Tag: replaceable
-#: using-d-i.xml:2474 using-d-i.xml:2543
+#: using-d-i.xml:2465 using-d-i.xml:2534
 #, no-c-format
 msgid "partnr"
 msgstr "partnr"
 
 #. Tag: para
-#: using-d-i.xml:2475
+#: using-d-i.xml:2466
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/arcboot.conf</"
@@ -3619,13 +3598,13 @@ msgid ""
 msgstr "分区号，<filename>/etc/arcboot.conf</filename> 处于该分区"
 
 #. Tag: replaceable
-#: using-d-i.xml:2483
+#: using-d-i.xml:2474
 #, no-c-format
 msgid "config"
 msgstr "config"
 
 #. Tag: para
-#: using-d-i.xml:2484
+#: using-d-i.xml:2475
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/arcboot.conf</"
@@ -3635,13 +3614,13 @@ msgstr ""
 "quote> 。"
 
 #. Tag: title
-#: using-d-i.xml:2505
+#: using-d-i.xml:2496
 #, no-c-format
 msgid "<command>delo</command>-installer"
 msgstr "<command>delo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2506
+#: using-d-i.xml:2497
 #, no-c-format
 msgid ""
 "The boot loader on DECstations is <command>DELO</command>. It has to be "
@@ -3667,13 +3646,13 @@ msgstr ""
 "</screen></informalexample> 。"
 
 #. Tag: replaceable
-#: using-d-i.xml:2525
+#: using-d-i.xml:2516
 #, no-c-format
 msgid "<replaceable>#</replaceable>"
 msgstr "<replaceable>#</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2517
 #, no-c-format
 msgid ""
 "is the TurboChannel device to be booted from, on most DECstations this is "
@@ -3683,20 +3662,20 @@ msgstr ""
 "userinput>"
 
 #. Tag: replaceable
-#: using-d-i.xml:2534
+#: using-d-i.xml:2525
 #, no-c-format
 msgid "<replaceable>id</replaceable>"
 msgstr "<replaceable>id</replaceable>"
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2526
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>DELO</command> is installed"
 msgstr "硬盘上的 SCSI ID，<command>DELO</command> 安装在其上"
 
 #. Tag: para
-#: using-d-i.xml:2544
+#: using-d-i.xml:2535
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/delo.conf</filename> "
@@ -3704,13 +3683,13 @@ msgid ""
 msgstr "分区号，<filename>/etc/delo.conf</filename> 处于此分区"
 
 #. Tag: replaceable
-#: using-d-i.xml:2552
+#: using-d-i.xml:2543
 #, no-c-format
 msgid "name"
 msgstr "name"
 
 #. Tag: para
-#: using-d-i.xml:2553
+#: using-d-i.xml:2544
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/delo.conf</"
@@ -3720,7 +3699,7 @@ msgstr ""
 "quote>"
 
 #. Tag: para
-#: using-d-i.xml:2563
+#: using-d-i.xml:2554
 #, no-c-format
 msgid ""
 "In case <filename>/etc/delo.conf</filename> is on the first partition on the "
@@ -3730,19 +3709,19 @@ msgstr ""
 "认的设置，但也可以用"
 
 #. Tag: screen
-#: using-d-i.xml:2569
+#: using-d-i.xml:2560
 #, no-c-format
 msgid "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 msgstr "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 
 #. Tag: title
-#: using-d-i.xml:2579
+#: using-d-i.xml:2570
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "安装 <command>Yaboot</command> 至硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2580
+#: using-d-i.xml:2571
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -3760,13 +3739,13 @@ msgstr ""
 "设为启动 &debian;。"
 
 #. Tag: title
-#: using-d-i.xml:2598
+#: using-d-i.xml:2589
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "安装 <command>Quik</command> 至硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2599
+#: using-d-i.xml:2590
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -3779,13 +3758,13 @@ msgstr ""
 "以工作在 7200，7300 和 7600 Powermacs，以及一些 Power Computing 克隆。"
 
 #. Tag: title
-#: using-d-i.xml:2615
+#: using-d-i.xml:2606
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2616
+#: using-d-i.xml:2607
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -3800,13 +3779,13 @@ msgstr ""
 "Commands</quote>，它位于 IBM 的 developerWorks 网站<command>ZIPL</command>。"
 
 #. Tag: title
-#: using-d-i.xml:2633
+#: using-d-i.xml:2624
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "安装 <command>SILO</command> Boot Loader 到硬盘"
 
 #. Tag: para
-#: using-d-i.xml:2635
+#: using-d-i.xml:2626
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -3833,13 +3812,13 @@ msgstr ""
 "区启动。这对于安装 GNU/Linux 到一个已经存在 SunOS/Solaris 的系统很有用。"
 
 #. Tag: title
-#: using-d-i.xml:2660
+#: using-d-i.xml:2651
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "不使用启动引导器继续进行"
 
 #. Tag: para
-#: using-d-i.xml:2662
+#: using-d-i.xml:2653
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -3855,7 +3834,7 @@ msgstr ""
 "护，以用于启动 GNU/Linux。</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2671
+#: using-d-i.xml:2662
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -3874,13 +3853,13 @@ msgstr ""
 "filename> 到一个独立的分区，还需要 <filename>/boot</filename> 文件系统。"
 
 #. Tag: title
-#: using-d-i.xml:2688
+#: using-d-i.xml:2679
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "完成安装"
 
 #. Tag: para
-#: using-d-i.xml:2689
+#: using-d-i.xml:2680
 #, no-c-format
 msgid ""
 "These are the last bits to do before rebooting to your new system. It mostly "
@@ -3888,13 +3867,13 @@ msgid ""
 msgstr "这是在您启动新系统之前的最后一些工作。主要进行一些 &d-i; 之后的清理。"
 
 #. Tag: title
-#: using-d-i.xml:2701
+#: using-d-i.xml:2692
 #, no-c-format
 msgid "Finish the Installation and Reboot"
 msgstr "完成安装并重启"
 
 #. Tag: para
-#: using-d-i.xml:2703
+#: using-d-i.xml:2694
 #, no-c-format
 msgid ""
 "This is the last step in the initial Debian installation process. You will "
@@ -3906,7 +3885,7 @@ msgstr ""
 "等)。安装程序将做最后几分钟的任务，然后启动到您的新 Debian 系统。"
 
 #. Tag: para
-#: using-d-i.xml:2710
+#: using-d-i.xml:2701
 #, no-c-format
 msgid ""
 "Select the <guimenuitem>Finish the installation</guimenuitem> menu item "
@@ -3919,13 +3898,13 @@ msgstr ""
 "安装步骤第一步里选做根文件系统。"
 
 #. Tag: title
-#: using-d-i.xml:2724
+#: using-d-i.xml:2715
 #, no-c-format
 msgid "Miscellaneous"
 msgstr "杂项"
 
 #. Tag: para
-#: using-d-i.xml:2725
+#: using-d-i.xml:2716
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -3936,13 +3915,13 @@ msgstr ""
 "题。"
 
 #. Tag: title
-#: using-d-i.xml:2738
+#: using-d-i.xml:2729
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "保存安装记录"
 
 #. Tag: para
-#: using-d-i.xml:2740
+#: using-d-i.xml:2731
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -3953,7 +3932,7 @@ msgstr ""
 "<filename>/var/log/installer/</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2747
+#: using-d-i.xml:2738
 #, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -3967,13 +3946,13 @@ msgstr ""
 "其它系统上研究记录，或者用于报告的附件。"
 
 #. Tag: title
-#: using-d-i.xml:2767
+#: using-d-i.xml:2758
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "使用 Shell 查看记录"
 
 #. Tag: para
-#: using-d-i.xml:2770
+#: using-d-i.xml:2761
 #, no-c-format
 msgid ""
 "There is an <guimenuitem>Execute a Shell</guimenuitem> item on the menu. If "
@@ -3994,7 +3973,7 @@ msgstr ""
 "<command>ash</command>。"
 
 #. Tag: para
-#: using-d-i.xml:2782
+#: using-d-i.xml:2773
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4010,7 +3989,7 @@ msgstr ""
 "shell 有一些好用的特性，如自动完成与历史纪录。"
 
 #. Tag: para
-#: using-d-i.xml:2791
+#: using-d-i.xml:2782
 #, no-c-format
 msgid ""
 "Use the menus to perform any task that they are able to do &mdash; the shell "
@@ -4027,13 +4006,13 @@ msgstr ""
 "<keycap>F1</keycap></keycombo>，或者键入 <command>exit</command> 返回菜单。"
 
 #. Tag: title
-#: using-d-i.xml:2810
+#: using-d-i.xml:2801
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "通过网络安装"
 
 #. Tag: para
-#: using-d-i.xml:2812
+#: using-d-i.xml:2803
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4048,7 +4027,7 @@ msgstr ""
 "先建立网络。(您可以使用 <xref linkend=\"automatic-install\"/> 做这部分工作。)"
 
 #. Tag: para
-#: using-d-i.xml:2822
+#: using-d-i.xml:2813
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4068,7 +4047,7 @@ msgstr ""
 "SSH</guimenuitem>。"
 
 #. Tag: para
-#: using-d-i.xml:2835
+#: using-d-i.xml:2826
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4076,7 +4055,7 @@ msgid ""
 msgstr "在 &arch-title; 上安装，建立网络之后这是默认的方法。"
 
 #. Tag: para
-#: using-d-i.xml:2840
+#: using-d-i.xml:2831
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4096,7 +4075,7 @@ msgstr ""
 "quote>。"
 
 #. Tag: para
-#: using-d-i.xml:2852
+#: using-d-i.xml:2843
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4107,7 +4086,7 @@ msgstr ""
 "他的组件。"
 
 #. Tag: para
-#: using-d-i.xml:2858
+#: using-d-i.xml:2849
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4135,7 +4114,7 @@ msgstr ""
 "确认是否正确。"
 
 #. Tag: para
-#: using-d-i.xml:2875
+#: using-d-i.xml:2866
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4151,7 +4130,7 @@ msgstr ""
 "再重新来过。"
 
 #. Tag: para
-#: using-d-i.xml:2884
+#: using-d-i.xml:2875
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -4168,7 +4147,7 @@ msgstr ""
 "的系统。在安装菜单只能打开一个 SSH 会话，但 shell 可以打开多个。"
 
 #. Tag: para
-#: using-d-i.xml:2894
+#: using-d-i.xml:2885
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -4181,7 +4160,7 @@ msgstr ""
 "配置的数据库。结果可能导致安装失败或者安装完成的系统出现问题。"
 
 #. Tag: para
-#: using-d-i.xml:2902
+#: using-d-i.xml:2893
 #, no-c-format
 msgid ""
 "Also, if you are running the SSH session from an X terminal, you should not "
@@ -4189,3 +4168,38 @@ msgid ""
 msgstr ""
 "另外，如果您在 X 终端下运行 ssh 会话，也不要改变窗口大小，它可能会造成连接中"
 "止。"
+
+#~ msgid ""
+#~ "If you are installing on a system that has a Sun USB keyboard and have "
+#~ "booted the installer with the default 2.4 kernel, the keyboard will not "
+#~ "be identified correctly by the installation system. The installer will "
+#~ "show you a list of Sun type keymaps to choose from, but selecting one of "
+#~ "these will result in a non-working keyboard. If you are installing with "
+#~ "the 2.6 kernel, there is no problem."
+#~ msgstr ""
+#~ "如果您的系统上使用 Sun USB 键盘，并且使用默认的 2.4 内核启动，该键盘将无法"
+#~ "被安装系统识别。\n"
+#~ "安装程序会提供 Sun 类型的 keymap 列表供选择，但是选择了其中一个会导致键盘"
+#~ "无法使用。\n"
+#~ "如果您使用 2.6 内核安装，便不会有问题。"
+
+#~ msgid ""
+#~ "To get a working keyboard, you should boot the installer with parameter "
+#~ "<userinput>priority=medium</userinput>. When you get to keyboard "
+#~ "selection<footnote> <para> If you are installing at default priority you "
+#~ "should use the <userinput>Go Back</userinput> button to return to the "
+#~ "installer menu when you are shown the list of Sun type keymaps. </para> </"
+#~ "footnote>, choose <quote>No keyboard to configure</quote> if you have a "
+#~ "keyboard with an American (US) layout, or choose <quote>USB keyboard</"
+#~ "quote> if you have a keyboard with a localized layout. Selecting "
+#~ "<quote>No keyboard to configure</quote> will leave the kernel keymap in "
+#~ "place, which is correct for US keyboards."
+#~ msgstr ""
+#~ "为了让键盘可以工作，您应该给引导程序加上参数 <userinput>priority=medium</"
+#~ "userinput>。当您看到键盘选择项<footnote> <para> 如果您使用默认的优先级安"
+#~ "装，在显示 Sun 类型 keymap 之后，您应该使用 <userinput>Go Back</"
+#~ "userinput> 按钮返回安装菜单。</para> </footnote>，如果您使用美式(US)键盘布"
+#~ "局，请选 <quote>No keyboard to configure</quote> ，如果您使用本地化键盘布"
+#~ "局，请选 <quote>USB keyboard</quote>。选择 <quote>No keyboard to "
+#~ "configure</quote> 会使内核 keympa 放在合适的地方，这对美式键盘是正确的做"
+#~ "法。"