[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 210 insertions, 178 deletions

diff --git a/po/zh_CN/install-methods.po b/po/zh_CN/install-methods.po
index f9f18218c..458763a65 100644
--- a/po/zh_CN/install-methods.po
+++ b/po/zh_CN/install-methods.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2009-11-18 01:11+0000\n"
+"POT-Creation-Date: 2010-02-24 01:12+0000\n"
 "PO-Revision-Date: 2009-11-21 12:42+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -1444,25 +1444,25 @@ msgstr ""
 "盘图标的方法来完成)。"
 
 #. Tag: filename
-#: install-methods.xml:1034 install-methods.xml:1372
+#: install-methods.xml:1034 install-methods.xml:1361
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1039 install-methods.xml:1377
+#: install-methods.xml:1039 install-methods.xml:1366
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1044 install-methods.xml:1382
+#: install-methods.xml:1044 install-methods.xml:1371
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1049 install-methods.xml:1387
+#: install-methods.xml:1049 install-methods.xml:1376
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
@@ -1588,21 +1588,29 @@ msgstr ""
 "求，我们推荐 <classname>tftpd-hpa</classname>。"
 
 #. Tag: title
-#: install-methods.xml:1142
+#: install-methods.xml:1141
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "设置 RARP 服务器"
 
 #. Tag: para
-#: install-methods.xml:1143
-#, no-c-format
+#: install-methods.xml:1142
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
+#| "address) of the client computers to be installed. If you don't know this "
+#| "information, you can <phrase arch=\"sparc\"> pick it off the initial "
+#| "OpenPROM boot messages, use the OpenBoot <userinput>.enet-addr</"
+#| "userinput> command, or </phrase> boot into <quote>Rescue</quote> mode (e."
+#| "g., from the rescue floppy) and use the command <userinput>/sbin/ifconfig "
+#| "eth0</userinput>."
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
 "address) of the client computers to be installed. If you don't know this "
 "information, you can <phrase arch=\"sparc\"> pick it off the initial "
 "OpenPROM boot messages, use the OpenBoot <userinput>.enet-addr</userinput> "
 "command, or </phrase> boot into <quote>Rescue</quote> mode (e.g., from the "
-"rescue floppy) and use the command <userinput>/sbin/ifconfig eth0</"
+"rescue floppy) and use the command <userinput>ip addr show dev eth0</"
 "userinput>."
 msgstr ""
 "为了设置 RARP，需要知道需要安装系统的客户机以太网卡地址(网卡 MAC 地址)。如果"
@@ -1612,7 +1620,7 @@ msgstr ""
 "ifconfig eth0</userinput> 命令。"
 
 #. Tag: para
-#: install-methods.xml:1155
+#: install-methods.xml:1154
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, "
@@ -1635,118 +1643,13 @@ msgstr ""
 "<userinput>/usr/etc/rarpd -a</userinput> 命令。"
 
 #. Tag: title
-#: install-methods.xml:1177
-#, no-c-format
-msgid "Setting up a BOOTP server"
-msgstr "架设 BOOTP 服务器"
-
-#. Tag: para
-#: install-methods.xml:1178
-#, no-c-format
-msgid ""
-"There are two BOOTP servers available for GNU/Linux. The first is CMU "
-"<command>bootpd</command>. The other is actually a DHCP server: ISC "
-"<command>dhcpd</command>. In &debian; these are contained in the "
-"<classname>bootp</classname> and <classname>dhcp3-server</classname> "
-"packages respectively."
-msgstr ""
-"在 GNU/Linux 下面可以使用两种 BOOTP 服务器。首先是 CMU <command>bootpd</"
-"command>，另外一种实际上是 DHCP 服务器：ISC <command>dhcpd</command>。"
-"&debian; 中它们分别被包含在 <classname>bootp</classname> 和 <classname>dhcp3-"
-"server</classname> 软件包。"
-
-#. Tag: para
-#: install-methods.xml:1186
-#, no-c-format
-msgid ""
-"To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
-"relevant line in <filename>/etc/inetd.conf</filename>. On &debian;, you can "
-"run <userinput>update-inetd --enable bootps</userinput>, then <userinput>/"
-"etc/init.d/inetd reload</userinput> to do so. Just in case your BOOTP server "
-"does not run Debian, the line in question should look like: "
-"<informalexample><screen>\n"
-"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
-"</screen></informalexample> Now, you must create an <filename>/etc/bootptab</"
-"filename> file. This has the same sort of familiar and cryptic format as the "
-"good old BSD <filename>printcap</filename>, <filename>termcap</filename>, "
-"and <filename>disktab</filename> files. See the <filename>bootptab</"
-"filename> manual page for more information. For CMU <command>bootpd</"
-"command>, you will need to know the hardware (MAC) address of the client. "
-"Here is an example <filename>/etc/bootptab</filename>: "
-"<informalexample><screen>\n"
-"client:\\\n"
-"  hd=/tftpboot:\\\n"
-"  bf=tftpboot.img:\\\n"
-"  ip=192.168.1.90:\\\n"
-"  sm=255.255.255.0:\\\n"
-"  sa=192.168.1.1:\\\n"
-"  ha=0123456789AB:\n"
-"</screen></informalexample> You will need to change at least the <quote>ha</"
-"quote> option, which specifies the hardware address of the client. The "
-"<quote>bf</quote> option specifies the file a client should retrieve via "
-"TFTP; see <xref linkend=\"tftp-images\"/> for more details. <phrase arch="
-"\"mips\"> On SGI machines you can just enter the command monitor and type "
-"<userinput>printenv</userinput>. The value of the <userinput>eaddr</"
-"userinput> variable is the machine's MAC address. </phrase>"
-msgstr ""
-"为了使用 CMU <command>bootpd</command>，您必须首先将 <filename>/etc/inetd."
-"conf</filename> 中相关的注释标记去掉(或者加入一些新行)。在 &debian; 里，您可"
-"以运行 <userinput>update-inetd --enable bootps</userinput>，然后执行 "
-"<userinput>/etc/init.d/inetd reload</userinput> 来实现此任务。万一您的 BOOTP "
-"服务器不是运行在 Debian 上，这行看起来应该像这样： "
-"<informalexample><screen>\n"
-"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
-"</screen></informalexample> 现在，您必须创建一个 <filename>/etc/bootptab</"
-"filename> 文件。它具有和一些经典的 BSD 文件很相似，并使用相同的加密格式。这些"
-"文件包括 <filename>printcap</filename>、<filename>termcap</filename> 和 "
-"<filename>disktab</filename>。参见 <filename>bootptab</filename> 的手册页以获"
-"得更多的信息。对于 CMU <command>bootpd</command>，您将需要知道客户机硬件(MAC)"
-"地址。这里有一个示例 <filename>/etc/bootptab</filename>： "
-"<informalexample><screen>\n"
-"client:\\\n"
-"  hd=/tftpboot:\\\n"
-"  bf=tftpboot.img:\\\n"
-"  ip=192.168.1.90:\\\n"
-"  sm=255.255.255.0:\\\n"
-"  sa=192.168.1.1:\\\n"
-"  ha=0123456789AB:\n"
-"</screen></informalexample> 您至少需要修改 <quote>ha</quote> 选项，它指定了客"
-"户机的硬件地址。<quote>bf</quote> 选项则指定了一个客户机应该通过 TFTP 取得的"
-"文件名称。请从 <xref linkend=\"tftp-images\"/> 处获得更多的信息。<phrase "
-"arch=\"mips\"> 在 SGI 机器上，您可以仅在进入命令监视器后输入 "
-"<userinput>printenv</userinput>。<userinput>eaddr</userinput> 的值就是机器的 "
-"MAC 地址。</phrase>"
-
-#. Tag: para
-#: install-methods.xml:1219
-#, no-c-format
-msgid ""
-"By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
-"easy, because it treats BOOTP clients as a moderately special case of DHCP "
-"clients. Some architectures require a complex configuration for booting "
-"clients via BOOTP. If yours is one of those, read the section <xref linkend="
-"\"dhcpd\"/>. Otherwise you will probably be able to get away with simply "
-"adding the <userinput>allow bootp</userinput> directive to the configuration "
-"block for the subnet containing the client in <filename>/etc/dhcp3/dhcpd."
-"conf</filename>, and restart <command>dhcpd</command> with <userinput>/etc/"
-"init.d/dhcpd3-server restart</userinput>."
-msgstr ""
-"相反，通过 ISC <command>dhcpd</command> 设置 BOOTP 就非常容易。因为它把 "
-"BOOTP 客户程序看成一个特殊的 DHCP 客户端。部分体系结构需要经过复杂的设置才能"
-"从 BOOTP 启动客户端。如果您的机器属于这种情况，请阅读<xref linkend=\"dhcpd\"/"
-">。否则，大概只需要将 <userinput>allow bootp</userinput> 指令添加到包含客户机"
-"的子网的配置部分 <filename>/etc/dhcp3/dhcpd.conf</filename>，并用命令 "
-"<userinput>/etc/init.d/dhcpd3-server restart</userinput> 重新启动 "
-"<command>dhcpd</command>。"
-
-#. Tag: title
-#: install-methods.xml:1241
+#: install-methods.xml:1175
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "设置 DHCP 服务器"
 
 #. Tag: para
-#: install-methods.xml:1242
+#: install-methods.xml:1176
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian;, "
@@ -1759,7 +1662,7 @@ msgstr ""
 "文件(参阅 <filename>/etc/dhcp3/dhcpd.conf</filename>)："
 
 #. Tag: screen
-#: install-methods.xml:1249
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1803,7 +1706,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:1251
+#: install-methods.xml:1185
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1819,7 +1722,7 @@ msgstr ""
 "TFTP 获取的文件名。"
 
 #. Tag: para
-#: install-methods.xml:1261
+#: install-methods.xml:1195
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1829,13 +1732,13 @@ msgstr ""
 "<userinput>/etc/init.d/dhcpd3-server restart</userinput>。"
 
 #. Tag: title
-#: install-methods.xml:1269
+#: install-methods.xml:1203
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "在 DHCP 配置中打开 PXE 引导功能"
 
 #. Tag: para
-#: install-methods.xml:1270
+#: install-methods.xml:1204
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1905,31 +1808,137 @@ msgstr ""
 "的 <xref linkend=\"tftp-images\"/>)。"
 
 #. Tag: title
-#: install-methods.xml:1286
+#: install-methods.xml:1224
+#, no-c-format
+msgid "Setting up a BOOTP server"
+msgstr "架设 BOOTP 服务器"
+
+#. Tag: para
+#: install-methods.xml:1225
+#, no-c-format
+msgid ""
+"There are two BOOTP servers available for GNU/Linux. The first is CMU "
+"<command>bootpd</command>. The other is actually a DHCP server: ISC "
+"<command>dhcpd</command>. In &debian; these are contained in the "
+"<classname>bootp</classname> and <classname>dhcp3-server</classname> "
+"packages respectively."
+msgstr ""
+"在 GNU/Linux 下面可以使用两种 BOOTP 服务器。首先是 CMU <command>bootpd</"
+"command>，另外一种实际上是 DHCP 服务器：ISC <command>dhcpd</command>。"
+"&debian; 中它们分别被包含在 <classname>bootp</classname> 和 <classname>dhcp3-"
+"server</classname> 软件包。"
+
+#. Tag: para
+#: install-methods.xml:1233
+#, no-c-format
+msgid ""
+"To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
+"relevant line in <filename>/etc/inetd.conf</filename>. On &debian;, you can "
+"run <userinput>update-inetd --enable bootps</userinput>, then <userinput>/"
+"etc/init.d/inetd reload</userinput> to do so. Just in case your BOOTP server "
+"does not run Debian, the line in question should look like: "
+"<informalexample><screen>\n"
+"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
+"</screen></informalexample> Now, you must create an <filename>/etc/bootptab</"
+"filename> file. This has the same sort of familiar and cryptic format as the "
+"good old BSD <filename>printcap</filename>, <filename>termcap</filename>, "
+"and <filename>disktab</filename> files. See the <filename>bootptab</"
+"filename> manual page for more information. For CMU <command>bootpd</"
+"command>, you will need to know the hardware (MAC) address of the client. "
+"Here is an example <filename>/etc/bootptab</filename>: "
+"<informalexample><screen>\n"
+"client:\\\n"
+"  hd=/tftpboot:\\\n"
+"  bf=tftpboot.img:\\\n"
+"  ip=192.168.1.90:\\\n"
+"  sm=255.255.255.0:\\\n"
+"  sa=192.168.1.1:\\\n"
+"  ha=0123456789AB:\n"
+"</screen></informalexample> You will need to change at least the <quote>ha</"
+"quote> option, which specifies the hardware address of the client. The "
+"<quote>bf</quote> option specifies the file a client should retrieve via "
+"TFTP; see <xref linkend=\"tftp-images\"/> for more details. <phrase arch="
+"\"mips\"> On SGI machines you can just enter the command monitor and type "
+"<userinput>printenv</userinput>. The value of the <userinput>eaddr</"
+"userinput> variable is the machine's MAC address. </phrase>"
+msgstr ""
+"为了使用 CMU <command>bootpd</command>，您必须首先将 <filename>/etc/inetd."
+"conf</filename> 中相关的注释标记去掉(或者加入一些新行)。在 &debian; 里，您可"
+"以运行 <userinput>update-inetd --enable bootps</userinput>，然后执行 "
+"<userinput>/etc/init.d/inetd reload</userinput> 来实现此任务。万一您的 BOOTP "
+"服务器不是运行在 Debian 上，这行看起来应该像这样： "
+"<informalexample><screen>\n"
+"bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
+"</screen></informalexample> 现在，您必须创建一个 <filename>/etc/bootptab</"
+"filename> 文件。它具有和一些经典的 BSD 文件很相似，并使用相同的加密格式。这些"
+"文件包括 <filename>printcap</filename>、<filename>termcap</filename> 和 "
+"<filename>disktab</filename>。参见 <filename>bootptab</filename> 的手册页以获"
+"得更多的信息。对于 CMU <command>bootpd</command>，您将需要知道客户机硬件(MAC)"
+"地址。这里有一个示例 <filename>/etc/bootptab</filename>： "
+"<informalexample><screen>\n"
+"client:\\\n"
+"  hd=/tftpboot:\\\n"
+"  bf=tftpboot.img:\\\n"
+"  ip=192.168.1.90:\\\n"
+"  sm=255.255.255.0:\\\n"
+"  sa=192.168.1.1:\\\n"
+"  ha=0123456789AB:\n"
+"</screen></informalexample> 您至少需要修改 <quote>ha</quote> 选项，它指定了客"
+"户机的硬件地址。<quote>bf</quote> 选项则指定了一个客户机应该通过 TFTP 取得的"
+"文件名称。请从 <xref linkend=\"tftp-images\"/> 处获得更多的信息。<phrase "
+"arch=\"mips\"> 在 SGI 机器上，您可以仅在进入命令监视器后输入 "
+"<userinput>printenv</userinput>。<userinput>eaddr</userinput> 的值就是机器的 "
+"MAC 地址。</phrase>"
+
+#. Tag: para
+#: install-methods.xml:1266
+#, no-c-format
+msgid ""
+"By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
+"easy, because it treats BOOTP clients as a moderately special case of DHCP "
+"clients. Some architectures require a complex configuration for booting "
+"clients via BOOTP. If yours is one of those, read the section <xref linkend="
+"\"dhcpd\"/>. Otherwise you will probably be able to get away with simply "
+"adding the <userinput>allow bootp</userinput> directive to the configuration "
+"block for the subnet containing the client in <filename>/etc/dhcp3/dhcpd."
+"conf</filename>, and restart <command>dhcpd</command> with <userinput>/etc/"
+"init.d/dhcpd3-server restart</userinput>."
+msgstr ""
+"相反，通过 ISC <command>dhcpd</command> 设置 BOOTP 就非常容易。因为它把 "
+"BOOTP 客户程序看成一个特殊的 DHCP 客户端。部分体系结构需要经过复杂的设置才能"
+"从 BOOTP 启动客户端。如果您的机器属于这种情况，请阅读<xref linkend=\"dhcpd\"/"
+">。否则，大概只需要将 <userinput>allow bootp</userinput> 指令添加到包含客户机"
+"的子网的配置部分 <filename>/etc/dhcp3/dhcpd.conf</filename>，并用命令 "
+"<userinput>/etc/init.d/dhcpd3-server restart</userinput> 重新启动 "
+"<command>dhcpd</command>。"
+
+#. Tag: title
+#: install-methods.xml:1285
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "开启 TFTP 服务器"
 
 #. Tag: para
-#: install-methods.xml:1287
+#: install-methods.xml:1286
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
-"<command>tftpd</command> is enabled. This is usually enabled by having "
-"something like the following line in <filename>/etc/inetd.conf</filename>: "
-"<informalexample><screen>\n"
-"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n"
-"</screen></informalexample> Debian packages will in general set this up "
-"correctly by default when they are installed."
+"<command>tftpd</command> is enabled."
 msgstr ""
-"要准备好 TFTP 服务器，您首先需要确定 <command>tftpd</command> 已经启动。这通"
-"常可以在 <filename>/etc/inetd.conf</filename> 添加如下字句来实现： "
-"<informalexample><screen>\n"
-"tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n"
-"</screen></informalexample> Debian 包通常在安装后会自动把这条设置好。"
 
 #. Tag: para
-#: install-methods.xml:1299
+#: install-methods.xml:1291
+#, no-c-format
+msgid ""
+"In the case of <classname>tftpd-hpa</classname> there are two ways the "
+"service can be run. It can be started on demand by the system's "
+"<classname>inetd</classname> daemon, or it can be set up to run as an "
+"independent daemon. Which of these methods is used is selected when the "
+"package is installed and can be changed by reconfiguring the package."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:1300
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1946,36 +1955,18 @@ msgstr ""
 "整一下配置文件示例。"
 
 #. Tag: para
-#: install-methods.xml:1309
+#: install-methods.xml:1310
 #, no-c-format
 msgid ""
-"Look in <filename>/etc/inetd.conf</filename> and remember the directory "
-"which is used as the argument of <command>in.tftpd</command><footnote> "
-"<para> All <command>in.tftpd</command> alternatives available in Debian "
-"should log TFTP requests to the system logs by default. Some of them support "
-"a <userinput>-v</userinput> argument to increase verbosity. It is "
-"recommended to check these log messages in case of boot problems as they are "
-"a good starting point for diagnosing the cause of errors. </para> </"
-"footnote>; you'll need that below. If you've had to change <filename>/etc/"
-"inetd.conf</filename>, you'll have to notify the running <command>inetd</"
-"command> process that the file has changed. On a Debian machine, run "
-"<userinput>/etc/init.d/inetd reload</userinput>; on other machines, find out "
-"the process ID for <command>inetd</command>, and run <userinput>kill -HUP "
-"<replaceable>inetd-pid</replaceable></userinput>."
+"All <command>in.tftpd</command> alternatives available in Debian should log "
+"TFTP requests to the system logs by default. Some of them support a "
+"<userinput>-v</userinput> argument to increase verbosity. It is recommended "
+"to check these log messages in case of boot problems as they are a good "
+"starting point for diagnosing the cause of errors."
 msgstr ""
-"检查 <filename>/etc/inetd.conf</filename> 文件记住被用作 <command>in.tftpd</"
-"command> 的参数的目录<footnote> <para> Debian 中所有 <command>in.tftpd</"
-"command> 参数默认都会将 TFTP 请求记录到系统日志中。有些还支持 <userinput>-v</"
-"userinput> 选项增加详细程度。万一遇到引导问题，建议先检查这些日志信息，这对于"
-"分析错误是一个好的起始点。</para> </footnote>，您接下来会需要它。如果必须修"
-"改 <filename>/etc/inetd.conf</filename>，您一定要提醒正在运行的 "
-"<command>inetd</command> 进程，该文件已经修改。在 Debian 系统中，应该执行 "
-"<userinput>/etc/init.d/inetd reload</userinput>；而在其它系统中，找到 "
-"<command>inetd</command> 所对应的进程 ID，并执行 <userinput>kill -HUP "
-"<replaceable>inetd-pid</replaceable></userinput>。"
 
 #. Tag: para
-#: install-methods.xml:1329
+#: install-methods.xml:1318
 #, no-c-format
 msgid ""
 "If you intend to install Debian on an SGI machine and your TFTP server is a "
@@ -2003,13 +1994,13 @@ msgstr ""
 "错误。"
 
 #. Tag: title
-#: install-methods.xml:1351
+#: install-methods.xml:1340
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "将 TFTP 映像放到适当的位置"
 
 #. Tag: para
-#: install-methods.xml:1352
+#: install-methods.xml:1341
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -2024,7 +2015,7 @@ msgstr ""
 "完全决定于 TFTP 客户程序，而且没有一个强制的标准。"
 
 #. Tag: para
-#: install-methods.xml:1361
+#: install-methods.xml:1350
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -2039,13 +2030,13 @@ msgstr ""
 "件："
 
 #. Tag: filename
-#: install-methods.xml:1392
+#: install-methods.xml:1381
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1397
+#: install-methods.xml:1386
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2060,7 +2051,7 @@ msgstr ""
 "所需的文件名传递给 <command>tftpd</command>。"
 
 #. Tag: para
-#: install-methods.xml:1405
+#: install-methods.xml:1394
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2075,13 +2066,13 @@ msgstr ""
 "efi</filename> 以启动所需的文件名传递至<command>tftpd</command>。"
 
 #. Tag: title
-#: install-methods.xml:1417
+#: install-methods.xml:1406
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "SPARC TFTP 引导"
 
 #. Tag: para
-#: install-methods.xml:1418
+#: install-methods.xml:1407
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -2109,7 +2100,7 @@ msgstr ""
 "并在必要时加上子体系名。"
 
 #. Tag: para
-#: install-methods.xml:1434
+#: install-methods.xml:1423
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -2121,7 +2112,7 @@ msgstr ""
 "映像。假如映像找不到，查看 tftp 服务器的日志所需要的映像文件名。"
 
 #. Tag: para
-#: install-methods.xml:1441
+#: install-methods.xml:1430
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -2134,13 +2125,13 @@ msgstr ""
 "仍然必须被请放置在 TFTP 服务器要查找的目录中。"
 
 #. Tag: title
-#: install-methods.xml:1452
+#: install-methods.xml:1441
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "SGI TFTP 引导"
 
 #. Tag: para
-#: install-methods.xml:1453
+#: install-methods.xml:1442
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -2154,13 +2145,13 @@ msgstr ""
 "现在 <filename>/etc/dhcpd.conf</filename>。"
 
 #. Tag: title
-#: install-methods.xml:1561
+#: install-methods.xml:1550
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "自动化安装"
 
 #. Tag: para
-#: install-methods.xml:1562
+#: install-methods.xml:1551
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2175,13 +2166,13 @@ msgstr ""
 "<classname>autoinstall</classname>，以及 Debian 安装程序本身。"
 
 #. Tag: title
-#: install-methods.xml:1575
+#: install-methods.xml:1564
 #, no-c-format
 msgid "Automatic Installation Using the Debian Installer"
 msgstr "使用 Debian 安装程序进行自动安装"
 
 #. Tag: para
-#: install-methods.xml:1576
+#: install-methods.xml:1565
 #, no-c-format
 msgid ""
 "The Debian Installer supports automating installs via preconfiguration "
@@ -2193,7 +2184,7 @@ msgstr ""
 "质上加载，并自动回答安装过程中的问题。"
 
 #. Tag: para
-#: install-methods.xml:1583
+#: install-methods.xml:1572
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2201,3 +2192,44 @@ msgid ""
 msgstr ""
 "在 <xref linkend=\"appendix-preseed\"/> 是有关预置文件的完整文档，并有一些可"
 "以使用的例子供您修改。"
+
+#~ msgid ""
+#~ "To get the TFTP server ready to go, you should first make sure that "
+#~ "<command>tftpd</command> is enabled. This is usually enabled by having "
+#~ "something like the following line in <filename>/etc/inetd.conf</"
+#~ "filename>: <informalexample><screen>\n"
+#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n"
+#~ "</screen></informalexample> Debian packages will in general set this up "
+#~ "correctly by default when they are installed."
+#~ msgstr ""
+#~ "要准备好 TFTP 服务器，您首先需要确定 <command>tftpd</command> 已经启动。这"
+#~ "通常可以在 <filename>/etc/inetd.conf</filename> 添加如下字句来实现： "
+#~ "<informalexample><screen>\n"
+#~ "tftp dgram udp wait nobody /usr/sbin/tcpd in.tftpd /tftpboot\n"
+#~ "</screen></informalexample> Debian 包通常在安装后会自动把这条设置好。"
+
+#~ msgid ""
+#~ "Look in <filename>/etc/inetd.conf</filename> and remember the directory "
+#~ "which is used as the argument of <command>in.tftpd</command><footnote> "
+#~ "<para> All <command>in.tftpd</command> alternatives available in Debian "
+#~ "should log TFTP requests to the system logs by default. Some of them "
+#~ "support a <userinput>-v</userinput> argument to increase verbosity. It is "
+#~ "recommended to check these log messages in case of boot problems as they "
+#~ "are a good starting point for diagnosing the cause of errors. </para> </"
+#~ "footnote>; you'll need that below. If you've had to change <filename>/etc/"
+#~ "inetd.conf</filename>, you'll have to notify the running <command>inetd</"
+#~ "command> process that the file has changed. On a Debian machine, run "
+#~ "<userinput>/etc/init.d/inetd reload</userinput>; on other machines, find "
+#~ "out the process ID for <command>inetd</command>, and run <userinput>kill -"
+#~ "HUP <replaceable>inetd-pid</replaceable></userinput>."
+#~ msgstr ""
+#~ "检查 <filename>/etc/inetd.conf</filename> 文件记住被用作 <command>in."
+#~ "tftpd</command> 的参数的目录<footnote> <para> Debian 中所有 <command>in."
+#~ "tftpd</command> 参数默认都会将 TFTP 请求记录到系统日志中。有些还支持 "
+#~ "<userinput>-v</userinput> 选项增加详细程度。万一遇到引导问题，建议先检查这"
+#~ "些日志信息，这对于分析错误是一个好的起始点。</para> </footnote>，您接下来"
+#~ "会需要它。如果必须修改 <filename>/etc/inetd.conf</filename>，您一定要提醒"
+#~ "正在运行的 <command>inetd</command> 进程，该文件已经修改。在 Debian 系统"
+#~ "中，应该执行 <userinput>/etc/init.d/inetd reload</userinput>；而在其它系统"
+#~ "中，找到 <command>inetd</command> 所对应的进程 ID，并执行 <userinput>kill "
+#~ "-HUP <replaceable>inetd-pid</replaceable></userinput>。"