Update of POT and PO files for the manual

1 files changed, 312 insertions, 103 deletions

diff --git a/po/zh_CN/boot-installer.po b/po/zh_CN/boot-installer.po
index c1d190fa5..f52c98616 100644
--- a/po/zh_CN/boot-installer.po
+++ b/po/zh_CN/boot-installer.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2006-10-17 08:26+0000\n"
+"POT-Creation-Date: 2006-10-29 14:49+0000\n"
 "PO-Revision-Date: 2006-10-25 20:36+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -1310,7 +1310,11 @@ msgid ""
 "the ide-floppy driver maps the device to. For example, if your LS-120 drive "
 "is connected as the first IDE device (master) on the second cable, you enter "
 "<userinput>linux root=/dev/hdc</userinput> at the boot prompt."
-msgstr "要想在 LS-120 驱动器(ATAPI 版本)使用这些软盘，您需指定这些软盘设备的虚拟地址。这可以通过 <emphasis>root=</emphasis> 引导参数来指定映射的 ide-floppy 驱动器设备名来完成。比如，您的 LS-120 驱动器连接到第二根线第一个 IDE 设备(master)，那么在提示符下输入 <userinput>linux root=/dev/hdc</userinput>。"
+msgstr ""
+"要想在 LS-120 驱动器(ATAPI 版本)使用这些软盘，您需指定这些软盘设备的虚拟地"
+"址。这可以通过 <emphasis>root=</emphasis> 引导参数来指定映射的 ide-floppy 驱"
+"动器设备名来完成。比如，您的 LS-120 驱动器连接到第二根线第一个 IDE 设备"
+"(master)，那么在提示符下输入 <userinput>linux root=/dev/hdc</userinput>。"
 
 #. Tag: para
 #: boot-installer.xml:963
@@ -3420,15 +3424,12 @@ msgstr "Debian 安装程序的参数"
 
 #. Tag: para
 #: boot-installer.xml:2804
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "The installation system recognizes a few additional boot "
-"parameters<footnote> <para> Note that the 2.4 kernel accepts a maximum of 8 "
-"command line options and 8 environment options (including any options added "
-"by default for the installer). If these numbers are exceeded, 2.4 kernels "
-"will drop any excess options. With kernel 2.6.9 or newer, you can use 32 "
-"command line options and 32 environment options. </para> </footnote> which "
-"may be useful."
+"parameters<footnote> <para> With current kernels (2.6.9 or newer) you can "
+"use 32 command line options and 32 environment options. If these numbers are "
+"exceeded, the kernel will panic. </para> </footnote> which may be useful."
 msgstr ""
 "安装系统能识别一些额外的引导参数<footnote> <para> 注意，2.4 内核最多可以接受 "
 "8 个命令行参数和 8 个环境变量选项(包括安装程序默认使用的选项)。如果超出，2.4 "
@@ -3436,13 +3437,13 @@ msgstr ""
 "境变量选项。</para> </footnote>，它们很有用。"
 
 #. Tag: term
-#: boot-installer.xml:2824
+#: boot-installer.xml:2821
 #, no-c-format
 msgid "debconf/priority"
 msgstr "debconf/priority"
 
 #. Tag: para
-#: boot-installer.xml:2825
+#: boot-installer.xml:2822
 #, no-c-format
 msgid ""
 "This parameter sets the lowest priority of messages to be displayed. Short "
@@ -3452,7 +3453,7 @@ msgstr ""
 "userinput>"
 
 #. Tag: para
-#: boot-installer.xml:2830
+#: boot-installer.xml:2827
 #, no-c-format
 msgid ""
 "The default installation uses <userinput>priority=high</userinput>. This "
@@ -3465,7 +3466,7 @@ msgstr ""
 "将按照要求调整优先级别。"
 
 #. Tag: para
-#: boot-installer.xml:2837
+#: boot-installer.xml:2834
 #, no-c-format
 msgid ""
 "If you add <userinput>priority=medium</userinput> as boot parameter, you "
@@ -3483,13 +3484,13 @@ msgstr ""
 "且尝试正确无误地执行各项事宜。"
 
 #. Tag: term
-#: boot-installer.xml:2851
+#: boot-installer.xml:2848
 #, no-c-format
 msgid "DEBIAN_FRONTEND"
 msgstr "DEBIAN_FRONTEND"
 
 #. Tag: para
-#: boot-installer.xml:2852
+#: boot-installer.xml:2849
 #, no-c-format
 msgid ""
 "This boot parameter controls the type of user interface used for the "
@@ -3528,13 +3529,13 @@ msgstr ""
 "用。"
 
 #. Tag: term
-#: boot-installer.xml:2888
+#: boot-installer.xml:2885
 #, no-c-format
 msgid "BOOT_DEBUG"
 msgstr "BOOT_DEBUG"
 
 #. Tag: para
-#: boot-installer.xml:2889
+#: boot-installer.xml:2886
 #, no-c-format
 msgid ""
 "Setting this boot parameter to 2 will cause the installer's boot process to "
@@ -3546,49 +3547,49 @@ msgstr ""
 "debug shell。(退出 shell 以后会继续引导过程。)"
 
 #. Tag: userinput
-#: boot-installer.xml:2898
+#: boot-installer.xml:2895
 #, no-c-format
 msgid "BOOT_DEBUG=0"
 msgstr "BOOT_DEBUG=0"
 
 #. Tag: para
-#: boot-installer.xml:2899
+#: boot-installer.xml:2896
 #, no-c-format
 msgid "This is the default."
 msgstr "此为默认。"
 
 #. Tag: userinput
-#: boot-installer.xml:2903
+#: boot-installer.xml:2900
 #, no-c-format
 msgid "BOOT_DEBUG=1"
 msgstr "BOOT_DEBUG=1"
 
 #. Tag: para
-#: boot-installer.xml:2904
+#: boot-installer.xml:2901
 #, no-c-format
 msgid "More verbose than usual."
 msgstr "更多的信息。"
 
 #. Tag: userinput
-#: boot-installer.xml:2908
+#: boot-installer.xml:2905
 #, no-c-format
 msgid "BOOT_DEBUG=2"
 msgstr "BOOT_DEBUG=2"
 
 #. Tag: para
-#: boot-installer.xml:2909
+#: boot-installer.xml:2906
 #, no-c-format
 msgid "Lots of debugging information."
 msgstr "大量的调试信息。"
 
 #. Tag: userinput
-#: boot-installer.xml:2913
+#: boot-installer.xml:2910
 #, no-c-format
 msgid "BOOT_DEBUG=3"
 msgstr "BOOT_DEBUG=3"
 
 #. Tag: para
-#: boot-installer.xml:2914
+#: boot-installer.xml:2911
 #, no-c-format
 msgid ""
 "Shells are run at various points in the boot process to allow detailed "
@@ -3598,13 +3599,13 @@ msgstr ""
 "Shell 将继续引导过程。"
 
 #. Tag: term
-#: boot-installer.xml:2928
+#: boot-installer.xml:2925
 #, no-c-format
 msgid "INSTALL_MEDIA_DEV"
 msgstr "INSTALL_MEDIA_DEV"
 
 #. Tag: para
-#: boot-installer.xml:2929
+#: boot-installer.xml:2926
 #, no-c-format
 msgid ""
 "The value of the parameter is the path to the device to load the Debian "
@@ -3615,7 +3616,7 @@ msgstr ""
 "<userinput>INSTALL_MEDIA_DEV=/dev/floppy/0</userinput>"
 
 #. Tag: para
-#: boot-installer.xml:2935
+#: boot-installer.xml:2932
 #, no-c-format
 msgid ""
 "The boot floppy, which normally scans all floppies it can to find the root "
@@ -3625,13 +3626,13 @@ msgstr ""
 "备。"
 
 #. Tag: term
-#: boot-installer.xml:2945
+#: boot-installer.xml:2942
 #, no-c-format
 msgid "debian-installer/framebuffer"
 msgstr "debian-installer/framebuffer"
 
 #. Tag: para
-#: boot-installer.xml:2946
+#: boot-installer.xml:2943
 #, no-c-format
 msgid ""
 "Some architectures use the kernel framebuffer to offer installation in a "
@@ -3647,7 +3648,7 @@ msgstr ""
 "者 bogl 的错误信息，一个空白的屏幕，或者在开始安装几分钟后停止。"
 
 #. Tag: para
-#: boot-installer.xml:2956
+#: boot-installer.xml:2953
 #, no-c-format
 msgid ""
 "The <userinput>video=vga16:off</userinput> argument may also be used to "
@@ -3658,19 +3659,19 @@ msgstr ""
 "用 Mobile Radeon 卡的 Dell Inspiron 上面被发现。"
 
 #. Tag: para
-#: boot-installer.xml:2962
+#: boot-installer.xml:2959
 #, no-c-format
 msgid "Such problems have been reported on the Amiga 1200 and SE/30."
 msgstr "在 Amiga 1200 and SE/30 上面报告过具有有这些方面的问题。"
 
 #. Tag: para
-#: boot-installer.xml:2966
+#: boot-installer.xml:2963
 #, no-c-format
 msgid "Such problems have been reported on hppa."
 msgstr "在 hppa 上面报告过存在这些问题。"
 
 #. Tag: para
-#: boot-installer.xml:2970
+#: boot-installer.xml:2967
 #, no-c-format
 msgid ""
 "Because of display problems on some systems, framebuffer support is "
@@ -3687,13 +3688,13 @@ msgstr ""
 "<userinput>fb=true</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:2984
+#: boot-installer.xml:2981
 #, no-c-format
 msgid "debian-installer/theme"
 msgstr "debian-installer/theme"
 
 #. Tag: para
-#: boot-installer.xml:2985
+#: boot-installer.xml:2982
 #, no-c-format
 msgid ""
 "A theme determines how the user interface of the installer looks (colors, "
@@ -3710,13 +3711,13 @@ msgstr ""
 "<userinput>theme=<replaceable>dark</replaceable></userinput> 设置。"
 
 #. Tag: term
-#: boot-installer.xml:2998
+#: boot-installer.xml:2995
 #, no-c-format
 msgid "debian-installer/probe/usb"
 msgstr "debian-installer/probe/usb"
 
 #. Tag: para
-#: boot-installer.xml:2999
+#: boot-installer.xml:2996
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to prevent probing for USB on boot, if "
@@ -3726,13 +3727,13 @@ msgstr ""
 "起的问题。"
 
 #. Tag: term
-#: boot-installer.xml:3008
+#: boot-installer.xml:3005
 #, no-c-format
 msgid "netcfg/disable_dhcp"
 msgstr "netcfg/disable_dhcp"
 
 #. Tag: para
-#: boot-installer.xml:3009
+#: boot-installer.xml:3006
 #, no-c-format
 msgid ""
 "By default, the &d-i; automatically probes for network configuration via "
@@ -3744,7 +3745,7 @@ msgstr ""
 "视并且改变其获得的设定。您可以在 DHCP 检测失败的情况下手工配置网络。"
 
 #. Tag: para
-#: boot-installer.xml:3016
+#: boot-installer.xml:3013
 #, no-c-format
 msgid ""
 "If you have a DHCP server on your local network, but want to avoid it "
@@ -3757,13 +3758,13 @@ msgstr ""
 "DHCP 来配置网络并且手工输入参数。"
 
 #. Tag: term
-#: boot-installer.xml:3027
+#: boot-installer.xml:3024
 #, no-c-format
 msgid "hw-detect/start_pcmcia"
 msgstr "hw-detect/start_pcmcia"
 
 #. Tag: para
-#: boot-installer.xml:3028
+#: boot-installer.xml:3025
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to prevent starting PCMCIA services, if "
@@ -3773,13 +3774,13 @@ msgstr ""
 "题。有些笔记本电脑对此会有错误的行为。"
 
 #. Tag: term
-#: boot-installer.xml:3038
+#: boot-installer.xml:3035
 #, no-c-format
 msgid "preseed/url"
 msgstr "preseed/url"
 
 #. Tag: para
-#: boot-installer.xml:3039
+#: boot-installer.xml:3036
 #, no-c-format
 msgid ""
 "Specify the url to a preconfiguration file to download and use in automating "
@@ -3790,13 +3791,13 @@ msgstr ""
 "install\"/>。简写: <userinput>url</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:3049
+#: boot-installer.xml:3046
 #, no-c-format
 msgid "preseed/file"
 msgstr "preseed/file"
 
 #. Tag: para
-#: boot-installer.xml:3050
+#: boot-installer.xml:3047
 #, no-c-format
 msgid ""
 "Specify the path to a preconfiguration file to load to automating the "
@@ -3807,13 +3808,13 @@ msgstr ""
 ">。简写: <userinput>file</userinput>"
 
 #. Tag: term
-#: boot-installer.xml:3060
+#: boot-installer.xml:3057
 #, no-c-format
 msgid "cdrom-detect/eject"
 msgstr "cdrom-detect/eject"
 
 #. Tag: para
-#: boot-installer.xml:3061
+#: boot-installer.xml:3058
 #, no-c-format
 msgid ""
 "By default, before rebooting, &d-i; automatically ejects the optical media "
@@ -3829,7 +3830,7 @@ msgstr ""
 "重新加载介质。"
 
 #. Tag: para
-#: boot-installer.xml:3070
+#: boot-installer.xml:3067
 #, no-c-format
 msgid ""
 "Set to <userinput>false</userinput> to disable automatic ejection, and be "
@@ -3840,25 +3841,25 @@ msgstr ""
 "后，不会自动从光盘引导。"
 
 #. Tag: term
-#: boot-installer.xml:3081
+#: boot-installer.xml:3078
 #, no-c-format
 msgid "ramdisk_size"
 msgstr "ramdisk_size"
 
 #. Tag: para
-#: boot-installer.xml:3082
+#: boot-installer.xml:3079
 #, no-c-format
 msgid "If you are using a 2.2.x kernel, you may need to set &ramdisksize;."
 msgstr "如果您在使用 2.2.x 内核，也许需要设置 &ramdisksize;。"
 
 #. Tag: term
-#: boot-installer.xml:3090
+#: boot-installer.xml:3087
 #, no-c-format
 msgid "directfb/hw-accel"
 msgstr "directfb/hw-accel"
 
 #. Tag: para
-#: boot-installer.xml:3091
+#: boot-installer.xml:3088
 #, no-c-format
 msgid ""
 "For the gtk frontend (graphical installer), hardware acceleration in "
@@ -3869,13 +3870,13 @@ msgstr ""
 "以在启动安装程序的时候设置参数为 <userinput>true</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:3101
+#: boot-installer.xml:3098
 #, no-c-format
 msgid "rescue/enable"
 msgstr "rescue/enable"
 
 #. Tag: para
-#: boot-installer.xml:3102
+#: boot-installer.xml:3099
 #, no-c-format
 msgid ""
 "Set to <userinput>true</userinput> to enter rescue mode rather than "
@@ -3885,19 +3886,218 @@ msgstr ""
 "<xref linkend=\"rescue\"/>。"
 
 #. Tag: title
-#: boot-installer.xml:3120
+#: boot-installer.xml:3117
 #, no-c-format
 msgid "Troubleshooting the Installation Process"
 msgstr "安装过程中的故障修复"
 
 #. Tag: title
-#: boot-installer.xml:3125
+#: boot-installer.xml:3122
+#, fuzzy, no-c-format
+msgid "CD-ROM Reliability"
+msgstr "软盘的可靠性"
+
+#. Tag: para
+#: boot-installer.xml:3123
+#, no-c-format
+msgid ""
+"Sometimes, especially with older CD-ROM drives, the installer may fail to "
+"boot from a CD-ROM. The installer may also &mdash; even after booting "
+"successfully from CD-ROM &mdash; fail to recognize the CD-ROM or return "
+"errors while reading from it during the installation."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3130
+#, no-c-format
+msgid ""
+"There are a many different possible causes for these problems. We can only "
+"list some common issues and provide general suggestions on how to deal with "
+"them. The rest is up to you."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3136
+#, no-c-format
+msgid ""
+"If you cannot get the installation working from CD-ROM, try one of the other "
+"installation methods that are available."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3144
+#, no-c-format
+msgid "Common issues"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3147
+#, no-c-format
+msgid ""
+"Some older CD-ROM drives do not support reading from discs that were burned "
+"at high speeds using a modern CD writer."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3153
+#, no-c-format
+msgid ""
+"If your system boots correctly from the CD-ROM, it does not necessarily mean "
+"that Linux also supports the CD-ROM (or, more correctly, the controller that "
+"your CD-ROM drive is connected to)."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3160
+#, no-c-format
+msgid ""
+"Some older CD-ROM drives do not work correctly if <quote>direct memory "
+"access</quote> (DMA) is enabled."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3171
+#, no-c-format
+msgid "How to investigate and maybe solve issues"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3172
+#, no-c-format
+msgid "If the CD-ROM fails to boot, try the suggestions listed below."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3177
+#, no-c-format
+msgid ""
+"Check that your BIOS actually supports booting from CD-ROM (older systems "
+"possibly don't) and that your CD-ROM drive supports the media you are using."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3183
+#, no-c-format
+msgid ""
+"If you downloaded an iso image, check that the md5sum of that image matches "
+"the one listed for the image in the <filename>MD5SUMS</filename> file that "
+"should be present in the same location as where you downloaded the image "
+"from. <informalexample><screen>\n"
+"$ md5sum <replaceable>debian-testing-i386-netinst.iso</replaceable>\n"
+"a20391b12f7ff22ef705cee4059c6b92  <replaceable>debian-testing-i386-netinst."
+"iso</replaceable>\n"
+"</screen></informalexample> Next, check that the md5sum of the burned CD-ROM "
+"matches as well. The following command should work. It uses the size of the "
+"image to read the correct number of bytes from the CD-ROM."
+msgstr ""
+
+#. Tag: screen
+#: boot-installer.xml:3196
+#, no-c-format
+msgid ""
+"$ dd if=/dev/cdrom | \\\n"
+"> head -c `stat --format=%s <replaceable>debian-testing-i386-netinst.iso</"
+"replaceable>` | \\\n"
+"> md5sum\n"
+"a20391b12f7ff22ef705cee4059c6b92  -\n"
+"262668+0 records in\n"
+"262668+0 records out\n"
+"134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3201
+#, no-c-format
+msgid ""
+"If, after the installer has been booted successfully, the CD-ROM is not "
+"detected, sometimes simply trying again may solve the problem. If you have "
+"more than one CD-ROM drive, try changing the CD-ROM to the other drive. If "
+"that does not work or if the CD-ROM is recognized but there are errors when "
+"reading from it, try the suggestions listed below. Some basic knowledge of "
+"Linux is required for this. To execute any of the commands, you should first "
+"switch to the second virtual console (VT2) and activate the shell there."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3213
+#, no-c-format
+msgid ""
+"Switch to VT4 or view the contents of <filename>/var/log/syslog</filename> "
+"(use <command>nano</command> as editor) to check for any specific error "
+"messages. After that, also check the output of <command>dmesg</command>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3220
+#, no-c-format
+msgid ""
+"Check in the output of <command>dmesg</command> if your CD-ROM drive was "
+"recognized. You should see something like (the lines do not necessarily have "
+"to be consecutive): <informalexample><screen>\n"
+"Probing IDE interface ide1...\n"
+"hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive\n"
+"ide1 at 0x170-0x177,0x376 on irq 15\n"
+"hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)\n"
+"Uniform CD-ROM driver Revision: 3.20\n"
+"</screen></informalexample> If you don't see something like that, chances "
+"are the controller your CD-ROM is connected to was not recognized or may be "
+"not supported at all. If you know what driver is needed for the drive, you "
+"can try loading it manually using <command>modprobe</command>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3234
+#, no-c-format
+msgid ""
+"Check that there is a device node for your CD-ROM drive under <filename>/dev/"
+"</filename>. In the example above, this would be <filename>/dev/hdc</"
+"filename>. There should also be a <filename>/dev/cdroms/cdrom0</filename>."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3242
+#, no-c-format
+msgid ""
+"Use the <command>mount</command> command to check if the CD-ROM is already "
+"mounted; if not, try mounting it manually: <informalexample><screen>\n"
+"$ mount /dev/<replaceable>hdc</replaceable> /cdrom\n"
+"</screen></informalexample> Check if there are any error messages after that "
+"command."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3252
+#, no-c-format
+msgid ""
+"Check if DMA is currently enabled: <informalexample><screen>\n"
+"$ cd /proc/<replaceable>ide</replaceable>/<replaceable>hdc</replaceable>\n"
+"$ grep dma settings\n"
+"using_dma      1       0       1       rw\n"
+"</screen></informalexample> A <quote>1</quote> means it is enabled. If it "
+"is, try disabling it: <informalexample><screen>\n"
+"$ echo -n \"using_dma:0\" >settings\n"
+"</screen></informalexample> Make sure that you are in the directory for the "
+"device that corresponds to your CD-ROM drive."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3266
+#, no-c-format
+msgid ""
+"If there are any problems during the installation, try checking the "
+"integrity of the CD-ROM using the option near the bottom of the installer's "
+"main menu. This option can also be used as a general test if the CD-ROM can "
+"be read reliably."
+msgstr ""
+
+#. Tag: title
+#: boot-installer.xml:3281
 #, no-c-format
 msgid "Floppy Disk Reliability"
 msgstr "软盘的可靠性"
 
 #. Tag: para
-#: boot-installer.xml:3127
+#: boot-installer.xml:3283
 #, no-c-format
 msgid ""
 "The biggest problem for people using floppy disks to install Debian seems to "
@@ -3906,7 +4106,7 @@ msgstr ""
 "对于用软盘安装 Debian 的人来说，他们遇到的最大的问题很可能是软盘的可靠性。"
 
 #. Tag: para
-#: boot-installer.xml:3132
+#: boot-installer.xml:3288
 #, no-c-format
 msgid ""
 "The boot floppy is the floppy with the worst problems, because it is read by "
@@ -3922,22 +4122,30 @@ msgstr ""
 "印出很多有关的 I/O 错误。"
 
 #. Tag: para
-#: boot-installer.xml:3141
-#, no-c-format
+#: boot-installer.xml:3297
+#, fuzzy, no-c-format
 msgid ""
 "If you are having the installation stall at a particular floppy, the first "
-"thing you should do is re-download the floppy disk image and write it to a "
-"<emphasis>different</emphasis> floppy. Simply reformatting the old floppy "
-"may not be sufficient, even if it appears that the floppy was reformatted "
-"and written with no errors. It is sometimes useful to try writing the floppy "
-"on a different system."
+"thing you should write it to a <emphasis>different</emphasis> floppy. Simply "
+"reformatting the old floppy may not be sufficient, even if it appears that "
+"the floppy was reformatted and written with no errors. It is sometimes "
+"useful to try writing the floppy on a different system."
 msgstr ""
 "如果您在特定的软盘上陷入麻烦，第一件要做的事情，是重新下载磁盘映像并且把它写"
 "到<emphasis>另外</emphasis>一张软盘上。仅仅只是格式化老的软盘是不够的，有可能"
 "的话甚至要在别的统上重写这些软盘。"
 
 #. Tag: para
-#: boot-installer.xml:3151
+#: boot-installer.xml:3306
+#, no-c-format
+msgid ""
+"Normally you should not have download a floppy image again, but if you are "
+"experiencing problems it is always useful to verify that the images were "
+"downloaded correctly by verifying their md5sums."
+msgstr ""
+
+#. Tag: para
+#: boot-installer.xml:3312
 #, no-c-format
 msgid ""
 "One user reports he had to write the images to floppy <emphasis>three</"
@@ -3948,7 +4156,7 @@ msgstr ""
 "软盘才算工作良好。"
 
 #. Tag: para
-#: boot-installer.xml:3157
+#: boot-installer.xml:3318
 #, no-c-format
 msgid ""
 "Other users have reported that simply rebooting a few times with the same "
@@ -3959,13 +4167,13 @@ msgstr ""
 "有缺陷的硬件或固件软盘驱动器驱动程序造成的。"
 
 #. Tag: title
-#: boot-installer.xml:3166
+#: boot-installer.xml:3327
 #, no-c-format
 msgid "Boot Configuration"
 msgstr "引导配置"
 
 #. Tag: para
-#: boot-installer.xml:3168
+#: boot-installer.xml:3329
 #, no-c-format
 msgid ""
 "If you have problems and the kernel hangs during the boot process, doesn't "
@@ -3978,7 +4186,7 @@ msgstr ""
 "\"/> 讨论。"
 
 #. Tag: para
-#: boot-installer.xml:3175
+#: boot-installer.xml:3336
 #, no-c-format
 msgid ""
 "If you are booting with your own kernel instead of the one supplied with the "
@@ -3990,7 +4198,7 @@ msgstr ""
 "<userinput>CONFIG_DEVFS</userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:3182
+#: boot-installer.xml:3343
 #, no-c-format
 msgid ""
 "Often, problems can be solved by removing add-ons and peripherals, and then "
@@ -4001,7 +4209,7 @@ msgstr ""
 "arch=\"x86\">内置调制解调器、声卡以及即插即用设备特别容易引起问题。</phrase>"
 
 #. Tag: para
-#: boot-installer.xml:3188
+#: boot-installer.xml:3349
 #, no-c-format
 msgid ""
 "If you have a large amount of memory installed in your machine, more than "
@@ -4014,13 +4222,13 @@ msgstr ""
 "<userinput>mem=512m</userinput>。"
 
 #. Tag: title
-#: boot-installer.xml:3199
+#: boot-installer.xml:3360
 #, no-c-format
 msgid "Common &arch-title; Installation Problems"
 msgstr "&arch-title; 常见安装问题"
 
 #. Tag: para
-#: boot-installer.xml:3200
+#: boot-installer.xml:3361
 #, no-c-format
 msgid ""
 "There are some common installation problems that can be solved or avoided by "
@@ -4028,7 +4236,7 @@ msgid ""
 msgstr "有一些常见的安装问题，可以通过给安装程序特定的引导参数解决或避免。"
 
 #. Tag: para
-#: boot-installer.xml:3205
+#: boot-installer.xml:3366
 #, no-c-format
 msgid ""
 "Some systems have floppies with <quote>inverted DCLs</quote>. If you receive "
@@ -4039,7 +4247,7 @@ msgstr ""
 "息，并且知道软盘是好的，请尝试 <userinput>floppy=thinkpad</userinput> 参数。"
 
 #. Tag: para
-#: boot-installer.xml:3211
+#: boot-installer.xml:3372
 #, no-c-format
 msgid ""
 "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk "
@@ -4057,7 +4265,7 @@ msgstr ""
 "replaceable>,<replaceable>sectors</replaceable></userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:3220
+#: boot-installer.xml:3381
 #, no-c-format
 msgid ""
 "If you have a very old machine, and the kernel hangs after saying "
@@ -4070,7 +4278,7 @@ msgstr ""
 "userinput> 参数来取消这个测试。"
 
 #. Tag: para
-#: boot-installer.xml:3227
+#: boot-installer.xml:3388
 #, no-c-format
 msgid ""
 "If your screen begins to show a weird picture while the kernel boots, eg. "
@@ -4088,13 +4296,13 @@ msgstr ""
 "能用英语，请参见 <xref linkend=\"boot-parms\"/> 来获得细节信息。"
 
 #. Tag: title
-#: boot-installer.xml:3241
+#: boot-installer.xml:3402
 #, no-c-format
 msgid "System Freeze During the PCMCIA Configuration Phase"
 msgstr "在 PCMCIA 配置阶段系统停止"
 
 #. Tag: para
-#: boot-installer.xml:3242
+#: boot-installer.xml:3403
 #, no-c-format
 msgid ""
 "Some laptop models produced by Dell are known to crash when PCMCIA device "
@@ -4112,7 +4320,7 @@ msgstr ""
 "段。"
 
 #. Tag: para
-#: boot-installer.xml:3252
+#: boot-installer.xml:3413
 #, no-c-format
 msgid ""
 "Alternatively, you can boot the installer in expert mode. You will then be "
@@ -4132,13 +4340,13 @@ msgstr ""
 "装程序中，输入这些值的时候必须忽略逗号。"
 
 #. Tag: title
-#: boot-installer.xml:3269
+#: boot-installer.xml:3430
 #, no-c-format
 msgid "System Freeze while Loading the USB Modules"
 msgstr "在装入 USB 模块时系统停止"
 
 #. Tag: para
-#: boot-installer.xml:3270
+#: boot-installer.xml:3431
 #, no-c-format
 msgid ""
 "The kernel normally tries to install USB modules and the USB keyboard driver "
@@ -4155,13 +4363,13 @@ msgstr ""
 "installer/probe/usb=false</userinput> 参数，这将阻止装入此模块。"
 
 #. Tag: title
-#: boot-installer.xml:3284
+#: boot-installer.xml:3445
 #, no-c-format
 msgid "Interpreting the Kernel Startup Messages"
 msgstr "内核起始信息注解"
 
 #. Tag: para
-#: boot-installer.xml:3286
+#: boot-installer.xml:3447
 #, no-c-format
 msgid ""
 "During the boot sequence, you may see many messages in the form "
@@ -4194,13 +4402,13 @@ msgstr ""
 "linkend=\"kernel-baking\"/>)。"
 
 #. Tag: title
-#: boot-installer.xml:3311
+#: boot-installer.xml:3472
 #, no-c-format
 msgid "Bug Reporter"
 msgstr "Bug Reporter"
 
 #. Tag: para
-#: boot-installer.xml:3312
+#: boot-installer.xml:3473
 #, no-c-format
 msgid ""
 "If you get through the initial boot phase but cannot complete the install, "
@@ -4216,7 +4424,7 @@ msgstr ""
 "可以报告里附上该信息。"
 
 #. Tag: para
-#: boot-installer.xml:3323
+#: boot-installer.xml:3484
 #, no-c-format
 msgid ""
 "Other pertinent installation messages may be found in <filename>/var/log/</"
@@ -4227,13 +4435,13 @@ msgstr ""
 "新安装的系统启动后，放在 <filename>/var/log/debian-installer/</filename> 里。"
 
 #. Tag: title
-#: boot-installer.xml:3334
+#: boot-installer.xml:3495
 #, no-c-format
 msgid "Submitting Installation Reports"
 msgstr "提交缺陷报告"
 
 #. Tag: para
-#: boot-installer.xml:3335
+#: boot-installer.xml:3496
 #, no-c-format
 msgid ""
 "If you still have problems, please submit an installation report. We also "
@@ -4245,7 +4453,7 @@ msgstr ""
 "这让我们可以尽可能多地了解硬件的配置数量。"
 
 #. Tag: para
-#: boot-installer.xml:3342
+#: boot-installer.xml:3503
 #, no-c-format
 msgid ""
 "If you have a working Debian system, the easiest way to send an installation "
@@ -4259,8 +4467,8 @@ msgstr ""
 "installation-report</command> 命令。"
 
 #. Tag: para
-#: boot-installer.xml:3349
-#, no-c-format
+#: boot-installer.xml:3510
+#, fuzzy, no-c-format
 msgid ""
 "Please use this template when filling out installation reports, and file the "
 "report as a bug report against the <classname>installation-reports</"
@@ -4269,7 +4477,7 @@ msgid ""
 "Package: installation-reports\n"
 "\n"
 "Boot method: &lt;How did you boot the installer? CD? floppy? network?&gt;\n"
-"Image version: &lt;Fill in date and from where you got the image&gt;\n"
+"Image version: &lt;Full URL to image you downloaded is best&gt;\n"
 "Date: &lt;Date and time of the install&gt;\n"
 "\n"
 "Machine: &lt;Description of machine (eg, IBM Thinkpad R32)&gt;\n"
@@ -4277,23 +4485,24 @@ msgid ""
 "Memory:\n"
 "Partitions: &lt;df -Tl will do; the raw partition table is preferred&gt;\n"
 "\n"
-"Output of lspci and lspci -n:\n"
+"Output of lspci -nn and lspci -vnn:\n"
 "\n"
 "Base System Installation Checklist:\n"
 "[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it\n"
 "\n"
-"Initial boot worked:    [ ]\n"
-"Configure network HW:   [ ]\n"
-"Config network:         [ ]\n"
+"Initial boot:           [ ]\n"
+"Detect network card:    [ ]\n"
+"Configure network:      [ ]\n"
 "Detect CD:              [ ]\n"
 "Load installer modules: [ ]\n"
 "Detect hard drives:     [ ]\n"
 "Partition hard drives:  [ ]\n"
-"Create file systems:    [ ]\n"
-"Mount partitions:       [ ]\n"
 "Install base system:    [ ]\n"
+"Clock/timezone setup:   [ ]\n"
+"User/password setup:    [ ]\n"
+"Install tasks:          [ ]\n"
 "Install boot loader:    [ ]\n"
-"Reboot:                 [ ]\n"
+"Overall install:        [ ]\n"
 "\n"
 "Comments/Problems:\n"
 "\n"