Clean-up - sync translations, where possible

1 files changed, 222 insertions, 228 deletions

diff --git a/po/sv/random-bits.po b/po/sv/random-bits.po
index 01a57050c..3eac015ae 100644
--- a/po/sv/random-bits.po
+++ b/po/sv/random-bits.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: random-bits\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2021-02-13 16:19+0000\n"
+"POT-Creation-Date: 2022-05-19 22:02+0000\n"
 "PO-Revision-Date: 2020-08-20 11:36+0000\n"
 "Last-Translator: Luna Jernberg <droidbittin@gmail.com>\n"
 "Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
@@ -290,48 +290,14 @@ msgstr ""
 "kommandot <command>modconf</command> (från paketet med samma namn) och leta "
 "i kategorin <userinput>kernel/drivers/input/mouse</userinput>."
 
-#. Tag: para
-#: random-bits.xml:149
-#, no-c-format
-msgid ""
-"Modern kernels give you the capability to emulate a three-button mouse when "
-"your mouse only has one button. Just add the following lines to <filename>/"
-"etc/sysctl.conf</filename> file."
-msgstr ""
-"Moderna kärnor ger dig möjligheten att emulera en tre-knappars mus när din "
-"mus endast har en knapp. Lägg helt enkelt till följande rader till filen "
-"<filename>/etc/sysctl.conf</filename>."
-
-#. Tag: screen
-#: random-bits.xml:156
-#, no-c-format
-msgid ""
-"# 3-button mouse emulation\n"
-"# turn on emulation\n"
-"/dev/mac_hid/mouse_button_emulation = 1\n"
-"# Send middle mouse button signal with the F11 key\n"
-"/dev/mac_hid/mouse_button2_keycode = 87\n"
-"# Send right mouse button signal with the F12 key\n"
-"/dev/mac_hid/mouse_button3_keycode = 88\n"
-"# For different keys, use showkey to tell you what the code is."
-msgstr ""
-"# Emulering av 3-knapparsmus\n"
-"# aktivera emulering\n"
-"/dev/mac_hid/mouse_button_emulation = 1\n"
-"# Skicka mittenmusknappssignal med tangenten F11\n"
-"/dev/mac_hid/mouse_button2_keycode = 87\n"
-"# Skicka högermusknappssignal med tangenten F12\n"
-"/dev/mac_hid/mouse_button3_keycode = 88\n"
-"# För andra tangenter, använd showkey för att visa dig vilken koden är."
-
 #. Tag: title
-#: random-bits.xml:163
+#: random-bits.xml:168
 #, no-c-format
 msgid "Disk Space Needed for Tasks"
 msgstr "Nödvändig diskplats för funktioner"
 
 #. Tag: para
-#: random-bits.xml:164
+#: random-bits.xml:169
 #, no-c-format
 msgid ""
 "A standard installation for the amd64 architecture, including all standard "
@@ -345,7 +311,7 @@ msgstr ""
 "vald, kommer att ta upp &base-system-size; MB."
 
 #. Tag: para
-#: random-bits.xml:172
+#: random-bits.xml:177
 #, no-c-format
 msgid ""
 "In both cases this is the actual disk space used <emphasis>after</emphasis> "
@@ -362,7 +328,7 @@ msgstr ""
 "installationen och för normal systemanvändning."
 
 #. Tag: para
-#: random-bits.xml:181
+#: random-bits.xml:186
 #, no-c-format
 msgid ""
 "The following table lists sizes reported by aptitude for the tasks listed in "
@@ -377,7 +343,7 @@ msgstr ""
 "ihop siffrorna."
 
 #. Tag: para
-#: random-bits.xml:188
+#: random-bits.xml:193
 #, no-c-format
 msgid ""
 "By default the installer will install the GNOME desktop environment, but "
@@ -392,7 +358,7 @@ msgstr ""
 "\"/>)."
 
 #. Tag: para
-#: random-bits.xml:195
+#: random-bits.xml:200
 #, no-c-format
 msgid ""
 "Note that you will need to add the sizes listed in the table to the size of "
@@ -410,235 +376,235 @@ msgstr ""
 "(temporärt) för <filename>/var</filename>."
 
 #. Tag: entry
-#: random-bits.xml:209
+#: random-bits.xml:214
 #, no-c-format
 msgid "Task"
 msgstr "Funktion"
 
 #. Tag: entry
-#: random-bits.xml:210
+#: random-bits.xml:215
 #, no-c-format
 msgid "Installed size (MB)"
 msgstr "Installerad storlek (MB)"
 
 #. Tag: entry
-#: random-bits.xml:211
+#: random-bits.xml:216
 #, no-c-format
 msgid "Download size (MB)"
 msgstr "Hämtad storlek (MB)"
 
 #. Tag: entry
-#: random-bits.xml:212
+#: random-bits.xml:217
 #, no-c-format
 msgid "Space needed to install (MB)"
 msgstr "Utrymme som behövs för installation (MB)"
 
 #. Tag: entry
-#: random-bits.xml:218
+#: random-bits.xml:223
 #, no-c-format
 msgid "Desktop environment"
 msgstr "Skrivbordsmiljö"
 
 #. Tag: entry
-#: random-bits.xml:219 random-bits.xml:220 random-bits.xml:221
+#: random-bits.xml:224 random-bits.xml:225 random-bits.xml:226
 #, no-c-format
 msgid "&nbsp;"
 msgstr "&nbsp;"
 
 #. Tag: entry
-#: random-bits.xml:224
+#: random-bits.xml:229
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;GNOME (default)"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;GNOME (standard)"
 
 #. Tag: entry
-#: random-bits.xml:225
+#: random-bits.xml:230
 #, no-c-format
 msgid "&task-desktop-gnome-inst;"
 msgstr "&task-desktop-gnome-inst;"
 
 #. Tag: entry
-#: random-bits.xml:226
+#: random-bits.xml:231
 #, no-c-format
 msgid "&task-desktop-gnome-dl;"
 msgstr "&task-desktop-gnome-dl;"
 
 #. Tag: entry
-#: random-bits.xml:227
+#: random-bits.xml:232
 #, no-c-format
 msgid "&task-desktop-gnome-tot;"
 msgstr "&task-desktop-gnome-tot;"
 
 #. Tag: entry
-#: random-bits.xml:230
+#: random-bits.xml:235
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;KDE Plasma"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;KDE Plasma"
 
 #. Tag: entry
-#: random-bits.xml:231
+#: random-bits.xml:236
 #, no-c-format
 msgid "&task-desktop-kde-inst;"
 msgstr "&task-desktop-kde-inst;"
 
 #. Tag: entry
-#: random-bits.xml:232
+#: random-bits.xml:237
 #, no-c-format
 msgid "&task-desktop-kde-dl;"
 msgstr "&task-desktop-kde-dl;"
 
 #. Tag: entry
-#: random-bits.xml:233
+#: random-bits.xml:238
 #, no-c-format
 msgid "&task-desktop-kde-tot;"
 msgstr "&task-desktop-kde-tot;"
 
 #. Tag: entry
-#: random-bits.xml:236
+#: random-bits.xml:241
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;Xfce"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;Xfce"
 
 #. Tag: entry
-#: random-bits.xml:237
+#: random-bits.xml:242
 #, no-c-format
 msgid "&task-desktop-xfce-inst;"
 msgstr "&task-desktop-xfce-inst;"
 
 #. Tag: entry
-#: random-bits.xml:238
+#: random-bits.xml:243
 #, no-c-format
 msgid "&task-desktop-xfce-dl;"
 msgstr "&task-desktop-xfce-dl;"
 
 #. Tag: entry
-#: random-bits.xml:239
+#: random-bits.xml:244
 #, no-c-format
 msgid "&task-desktop-xfce-tot;"
 msgstr "&task-desktop-xfce-tot;"
 
 #. Tag: entry
-#: random-bits.xml:242
+#: random-bits.xml:247
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;LXDE"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;LXDE"
 
 #. Tag: entry
-#: random-bits.xml:243
+#: random-bits.xml:248
 #, no-c-format
 msgid "&task-desktop-lxde-inst;"
 msgstr "&task-desktop-lxde-inst;"
 
 #. Tag: entry
-#: random-bits.xml:244
+#: random-bits.xml:249
 #, no-c-format
 msgid "&task-desktop-lxde-dl;"
 msgstr "&task-desktop-lxde-dl;"
 
 #. Tag: entry
-#: random-bits.xml:245
+#: random-bits.xml:250
 #, no-c-format
 msgid "&task-desktop-lxde-tot;"
 msgstr "&task-desktop-lxde-tot;"
 
 #. Tag: entry
-#: random-bits.xml:248
+#: random-bits.xml:253
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;MATE"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;MATE"
 
 #. Tag: entry
-#: random-bits.xml:249
+#: random-bits.xml:254
 #, no-c-format
 msgid "&task-desktop-mate-inst;"
 msgstr "&task-desktop-mate-inst;"
 
 #. Tag: entry
-#: random-bits.xml:250
+#: random-bits.xml:255
 #, no-c-format
 msgid "&task-desktop-mate-dl;"
 msgstr "&task-desktop-mate-dl;"
 
 #. Tag: entry
-#: random-bits.xml:251
+#: random-bits.xml:256
 #, no-c-format
 msgid "&task-desktop-mate-tot;"
 msgstr "&task-desktop-mate-tot;"
 
 #. Tag: entry
-#: random-bits.xml:254
+#: random-bits.xml:259
 #, no-c-format
 msgid "&nbsp;&nbsp;&bull;&nbsp;Cinnamon"
 msgstr "&nbsp;&nbsp;&bull;&nbsp;Cinnamon"
 
 #. Tag: entry
-#: random-bits.xml:255
+#: random-bits.xml:260
 #, no-c-format
 msgid "&task-desktop-cinnamon-inst;"
 msgstr "&task-desktop-cinnamon-inst;"
 
 #. Tag: entry
-#: random-bits.xml:256
+#: random-bits.xml:261
 #, no-c-format
 msgid "&task-desktop-cinnamon-dl;"
 msgstr "&task-desktop-cinnamon-dl;"
 
 #. Tag: entry
-#: random-bits.xml:257
+#: random-bits.xml:262
 #, no-c-format
 msgid "&task-desktop-cinnamon-tot;"
 msgstr "&task-desktop-cinnamon-tot;"
 
 #. Tag: entry
-#: random-bits.xml:261
+#: random-bits.xml:266
 #, no-c-format
 msgid "Web server"
 msgstr "Webbserver"
 
 #. Tag: entry
-#: random-bits.xml:262
+#: random-bits.xml:267
 #, no-c-format
 msgid "&task-web-inst;"
 msgstr "&task-web-inst;"
 
 #. Tag: entry
-#: random-bits.xml:263
+#: random-bits.xml:268
 #, no-c-format
 msgid "&task-web-dl;"
 msgstr "&task-web-dl;"
 
 #. Tag: entry
-#: random-bits.xml:264
+#: random-bits.xml:269
 #, no-c-format
 msgid "&task-web-tot;"
 msgstr "&task-web-tot;"
 
 #. Tag: entry
-#: random-bits.xml:268
+#: random-bits.xml:273
 #, no-c-format
 msgid "SSH server"
 msgstr "SSH-server"
 
 #. Tag: entry
-#: random-bits.xml:269
+#: random-bits.xml:274
 #, no-c-format
 msgid "&task-ssh-inst;"
 msgstr "&task-ssh-inst;"
 
 #. Tag: entry
-#: random-bits.xml:270
+#: random-bits.xml:275
 #, no-c-format
 msgid "&task-ssh-dl;"
 msgstr "&task-ssh-dl;"
 
 #. Tag: entry
-#: random-bits.xml:271
+#: random-bits.xml:276
 #, no-c-format
 msgid "&task-ssh-tot;"
 msgstr "&task-ssh-tot;"
 
 #. Tag: para
-#: random-bits.xml:277
+#: random-bits.xml:282
 #, no-c-format
 msgid ""
 "If you install in a language other than English, <command>tasksel</command> "
@@ -653,13 +619,13 @@ msgstr ""
 "installation."
 
 #. Tag: title
-#: random-bits.xml:292
+#: random-bits.xml:297
 #, no-c-format
 msgid "Installing &debian-gnu; from a Unix/Linux System"
 msgstr "Installera &debian-gnu; från ett Unix/Linux-system"
 
 #. Tag: para
-#: random-bits.xml:294
+#: random-bits.xml:299
 #, no-c-format
 msgid ""
 "This section explains how to install &debian-gnu; from an existing Unix or "
@@ -682,7 +648,7 @@ msgstr ""
 "kommando som ska anges i &debian;s chroot-miljö."
 
 #. Tag: para
-#: random-bits.xml:306
+#: random-bits.xml:311
 #, no-c-format
 msgid ""
 "Once you've got the new &debian; system configured to your preference, you "
@@ -699,7 +665,7 @@ msgstr ""
 "installationsmedia."
 
 #. Tag: para
-#: random-bits.xml:317
+#: random-bits.xml:322
 #, no-c-format
 msgid ""
 "As this is a mostly manual procedure, you should bear in mind that you will "
@@ -722,13 +688,13 @@ msgstr ""
 "behövas."
 
 #. Tag: title
-#: random-bits.xml:331
+#: random-bits.xml:336
 #, no-c-format
 msgid "Getting Started"
 msgstr "Påbörja arbetet"
 
 #. Tag: para
-#: random-bits.xml:332
+#: random-bits.xml:337
 #, no-c-format
 msgid ""
 "With your current *nix partitioning tools, repartition the hard drive as "
@@ -745,7 +711,7 @@ msgstr ""
 "skrivbordsmiljöer som GNOME eller KDE Plasma)."
 
 #. Tag: para
-#: random-bits.xml:340
+#: random-bits.xml:345
 #, no-c-format
 msgid ""
 "Next, create file systems on the partitions. For example, to create an ext3 "
@@ -763,7 +729,7 @@ msgstr ""
 "uteslut <userinput>-j</userinput>."
 
 #. Tag: para
-#: random-bits.xml:350
+#: random-bits.xml:355
 #, no-c-format
 msgid ""
 "Initialize and activate swap (substitute the partition number for your "
@@ -788,7 +754,7 @@ msgstr ""
 "godtyckligt, det refereras till senare här nedan."
 
 #. Tag: screen
-#: random-bits.xml:362
+#: random-bits.xml:367
 #, no-c-format
 msgid ""
 "# mkdir /mnt/debinst\n"
@@ -798,7 +764,7 @@ msgstr ""
 "# mount /dev/<replaceable>sda6</replaceable> /mnt/debinst"
 
 #. Tag: para
-#: random-bits.xml:365
+#: random-bits.xml:370
 #, no-c-format
 msgid ""
 "If you want to have parts of the filesystem (e.g. /usr) mounted on separate "
@@ -810,13 +776,13 @@ msgstr ""
 "fortsätter till nästa steg."
 
 #. Tag: title
-#: random-bits.xml:375
+#: random-bits.xml:380
 #, no-c-format
 msgid "Install <command>debootstrap</command>"
 msgstr "Installera <command>debootstrap</command>"
 
 #. Tag: para
-#: random-bits.xml:376
+#: random-bits.xml:381
 #, no-c-format
 msgid ""
 "The utility used by the &debian; installer, and recognized as the official "
@@ -841,7 +807,7 @@ msgstr ""
 "<command>debootstrap</command>."
 
 #. Tag: para
-#: random-bits.xml:406
+#: random-bits.xml:411
 #, no-c-format
 msgid ""
 "Or, you can use the following procedure to install it manually. Make a work "
@@ -868,7 +834,7 @@ msgstr ""
 "kommer att behöva root-privilegier för att installera filerna."
 
 #. Tag: screen
-#: random-bits.xml:421
+#: random-bits.xml:426
 #, no-c-format
 msgid ""
 "# ar -x debootstrap_0.X.X_all.deb\n"
@@ -881,13 +847,13 @@ msgstr ""
 "tar xv"
 
 #. Tag: title
-#: random-bits.xml:427
+#: random-bits.xml:432
 #, no-c-format
 msgid "Run <command>debootstrap</command>"
 msgstr "Kör <command>debootstrap</command>"
 
 #. Tag: para
-#: random-bits.xml:428
+#: random-bits.xml:433
 #, no-c-format
 msgid ""
 "<command>debootstrap</command> can download the needed files directly from "
@@ -904,7 +870,7 @@ msgstr ""
 "\"></ulink>."
 
 #. Tag: para
-#: random-bits.xml:437
+#: random-bits.xml:442
 #, no-c-format
 msgid ""
 "If you have a &releasename; &debian-gnu; installation image mounted at "
@@ -916,7 +882,7 @@ msgstr ""
 "URL: <userinput>file:/cdrom/debian/</userinput>"
 
 #. Tag: para
-#: random-bits.xml:443
+#: random-bits.xml:448
 #, no-c-format
 msgid ""
 "Substitute one of the following for <replaceable>ARCH</replaceable> in the "
@@ -936,13 +902,13 @@ msgstr ""
 "du lägga till alternativet <userinput>--foreign</userinput>."
 
 #. Tag: title
-#: random-bits.xml:458
+#: random-bits.xml:463
 #, no-c-format
 msgid "Configure The Base System"
 msgstr "Konfigurera grundsystemet"
 
 #. Tag: para
-#: random-bits.xml:459
+#: random-bits.xml:464
 #, no-c-format
 msgid ""
 "Now you've got a real &debian; system, though rather lean, on disk. "
@@ -978,7 +944,7 @@ msgstr ""
 "det."
 
 #. Tag: para
-#: random-bits.xml:479
+#: random-bits.xml:484
 #, no-c-format
 msgid ""
 "If the target architecture is different from the host, you need to finish "
@@ -988,19 +954,19 @@ msgstr ""
 "startband:"
 
 #. Tag: screen
-#: random-bits.xml:483
+#: random-bits.xml:488
 #, no-c-format
 msgid "/debootstrap/debootstrap --second-stage"
 msgstr "/debootstrap/debootstrap --second-stage"
 
 #. Tag: title
-#: random-bits.xml:488
+#: random-bits.xml:493
 #, no-c-format
 msgid "Create device files"
 msgstr "Skapa enhetsfiler"
 
 #. Tag: para
-#: random-bits.xml:489
+#: random-bits.xml:494
 #, no-c-format
 msgid ""
 "At this point <filename>/dev/</filename> only contains very basic device "
@@ -1020,13 +986,13 @@ msgstr ""
 "statiska enhetsfiler för det nya systemet."
 
 #. Tag: para
-#: random-bits.xml:499
+#: random-bits.xml:504
 #, no-c-format
 msgid "A few of the available options are:"
 msgstr "Ett par av de tillgängliga alternativen är:"
 
 #. Tag: para
-#: random-bits.xml:504
+#: random-bits.xml:509
 #, no-c-format
 msgid ""
 "install the makedev package, and create a default set of static device files "
@@ -1036,7 +1002,7 @@ msgstr ""
 "enhetsfiler (efter chroot)"
 
 #. Tag: screen
-#: random-bits.xml:508
+#: random-bits.xml:513
 #, no-c-format
 msgid ""
 "# apt install makedev\n"
@@ -1050,7 +1016,7 @@ msgstr ""
 "# MAKEDEV generic"
 
 #. Tag: para
-#: random-bits.xml:511
+#: random-bits.xml:516
 #, no-c-format
 msgid ""
 "manually create only specific device files using <command>MAKEDEV</command>"
@@ -1058,7 +1024,7 @@ msgstr ""
 "skapa manuellt endast specifika enhetsfiler med <command>MAKEDEV</command>"
 
 #. Tag: para
-#: random-bits.xml:516
+#: random-bits.xml:521
 #, no-c-format
 msgid ""
 "bind mount /dev from your host system on top of /dev in the target system; "
@@ -1070,13 +1036,13 @@ msgstr ""
 "enhetsfiler, så detta alternativ ska endast användas med försiktighet"
 
 #. Tag: title
-#: random-bits.xml:529
+#: random-bits.xml:534
 #, no-c-format
 msgid "Mount Partitions"
 msgstr "Montera partitioner"
 
 #. Tag: para
-#: random-bits.xml:530
+#: random-bits.xml:535
 #, no-c-format
 msgid ""
 "You need to create <filename>/etc/fstab</filename>. "
@@ -1156,13 +1122,13 @@ msgstr ""
 "innan du fortsätter:"
 
 #. Tag: screen
-#: random-bits.xml:556
+#: random-bits.xml:561
 #, no-c-format
 msgid "# mount -t proc proc /proc"
 msgstr "# mount -t proc proc /proc"
 
 #. Tag: para
-#: random-bits.xml:558
+#: random-bits.xml:563
 #, no-c-format
 msgid ""
 "The command <userinput>ls /proc</userinput> should now show a non-empty "
@@ -1173,19 +1139,19 @@ msgstr ""
 "Om det här skulle misslyckas, kan du kanske montera proc utanför chroot:"
 
 #. Tag: screen
-#: random-bits.xml:564
+#: random-bits.xml:569
 #, no-c-format
 msgid "# mount -t proc proc /mnt/debinst/proc"
 msgstr "# mount -t proc proc /mnt/debinst/proc"
 
 #. Tag: title
-#: random-bits.xml:570
+#: random-bits.xml:575
 #, no-c-format
 msgid "Setting Timezone"
 msgstr "Ställ in tidszon"
 
 #. Tag: para
-#: random-bits.xml:571
+#: random-bits.xml:576
 #, no-c-format
 msgid ""
 "Setting the third line of the file <filename>/etc/adjtime</filename> to "
@@ -1212,19 +1178,19 @@ msgstr ""
 "</screen></informalexample> Följande kommando låter dig välja din tidszon."
 
 #. Tag: screen
-#: random-bits.xml:585
+#: random-bits.xml:590
 #, no-c-format
 msgid "# dpkg-reconfigure tzdata"
 msgstr "# dpkg-reconfigure tzdata"
 
 #. Tag: title
-#: random-bits.xml:591
+#: random-bits.xml:596
 #, no-c-format
 msgid "Configure Networking"
 msgstr "Konfigurera nätverket"
 
 #. Tag: para
-#: random-bits.xml:592
+#: random-bits.xml:597
 #, no-c-format
 msgid ""
 "To configure networking, edit <filename>/etc/network/interfaces</filename>, "
@@ -1350,13 +1316,13 @@ msgstr ""
 "gränssnittsnamnet (eth0, eth1, etc.) som du förväntar dig."
 
 #. Tag: title
-#: random-bits.xml:633
+#: random-bits.xml:638
 #, no-c-format
 msgid "Configure Apt"
 msgstr "Konfigurera apt"
 
 #. Tag: para
-#: random-bits.xml:634
+#: random-bits.xml:639
 #, no-c-format
 msgid ""
 "Debootstrap will have created a very basic <filename>/etc/apt/sources.list</"
@@ -1382,13 +1348,13 @@ msgstr ""
 "userinput> efter att du har gjort ändringar i källistan."
 
 #. Tag: title
-#: random-bits.xml:650
+#: random-bits.xml:655
 #, no-c-format
 msgid "Configure Locales and Keyboard"
 msgstr "Konfigurera lokaler och tangentbord"
 
 #. Tag: para
-#: random-bits.xml:651
+#: random-bits.xml:656
 #, no-c-format
 msgid ""
 "To configure your locale settings to use a language other than English, "
@@ -1409,7 +1375,7 @@ msgstr ""
 "behövs):"
 
 #. Tag: screen
-#: random-bits.xml:661
+#: random-bits.xml:666
 #, no-c-format
 msgid ""
 "# apt install console-setup\n"
@@ -1419,7 +1385,7 @@ msgstr ""
 "# dpkg-reconfigure keyboard-configuration"
 
 #. Tag: para
-#: random-bits.xml:663
+#: random-bits.xml:668
 #, no-c-format
 msgid ""
 "Note that the keyboard cannot be set while in the chroot, but will be "
@@ -1429,13 +1395,13 @@ msgstr ""
 "kommer att konfigureras inför nästa omstart."
 
 #. Tag: title
-#: random-bits.xml:673
+#: random-bits.xml:678
 #, no-c-format
 msgid "Install a Kernel"
 msgstr "Installera en kärna"
 
 #. Tag: para
-#: random-bits.xml:674
+#: random-bits.xml:679
 #, no-c-format
 msgid ""
 "If you intend to boot this system, you probably want a &arch-kernel; kernel "
@@ -1446,32 +1412,32 @@ msgstr ""
 "kärnor med:"
 
 #. Tag: screen
-#: random-bits.xml:679
+#: random-bits.xml:684
 #, no-c-format
 msgid "# apt search &kernelpackage;"
 msgstr "# apt search &kernelpackage;"
 
 #. Tag: para
-#: random-bits.xml:681
+#: random-bits.xml:686
 #, no-c-format
 msgid "Then install the kernel package of your choice using its package name."
 msgstr ""
 "Installera sedan det kärnpaket som du önskar med hjälp av dess paketnamn."
 
 #. Tag: screen
-#: random-bits.xml:685
+#: random-bits.xml:690
 #, no-c-format
 msgid "# apt install &kernelpackage;-<replaceable>arch-etc</replaceable>"
 msgstr "# apt install &kernelpackage;-<replaceable>arch-etc</replaceable>"
 
 #. Tag: title
-#: random-bits.xml:691
+#: random-bits.xml:696
 #, no-c-format
 msgid "Set up the Boot Loader"
 msgstr "Ställ in starthanteraren"
 
 #. Tag: para
-#: random-bits.xml:692
+#: random-bits.xml:697
 #, no-c-format
 msgid ""
 "To make your &debian-gnu; system bootable, set up your boot loader to load "
@@ -1486,7 +1452,7 @@ msgstr ""
 "göra det."
 
 #. Tag: para
-#: random-bits.xml:699
+#: random-bits.xml:704
 #, no-c-format
 msgid ""
 "Check <userinput>info grub</userinput> for instructions on setting up the "
@@ -1500,7 +1466,7 @@ msgstr ""
 "din befintliga grub2 <filename>grub.cfg</filename>."
 
 #. Tag: para
-#: random-bits.xml:707
+#: random-bits.xml:712
 #, no-c-format
 msgid ""
 "Installing and setting up <classname>grub2</classname> is as easy as: "
@@ -1524,7 +1490,7 @@ msgstr ""
 "fungerande <filename>/boot/grub/grub.cfg</filename>."
 
 #. Tag: para
-#: random-bits.xml:717
+#: random-bits.xml:722
 #, no-c-format
 msgid ""
 "Note that this assumes that a <filename>/dev/sda</filename> device file has "
@@ -1535,63 +1501,14 @@ msgstr ""
 "skapats. Det finns alternativa metoder för att installera <command>grub2</"
 "command>, men dessa är utanför omfånget för denna bilaga."
 
-#. Tag: para
-#: random-bits.xml:723
-#, no-c-format
-msgid ""
-"Check <userinput>man yaboot.conf</userinput> for instructions on setting up "
-"the bootloader. If you are keeping the system you used to install &debian;, "
-"just add an entry for the &debian; install to your existing <filename>yaboot."
-"conf</filename>. You could also copy it to the new system and edit it there. "
-"After you are done editing, call ybin (remember it will use <filename>yaboot."
-"conf</filename> relative to the system you call it from)."
-msgstr ""
-"Kontrollera <userinput>man yaboot.conf</userinput> för instruktioner om hur "
-"man ställer in starthanteraren. Om du behåller systemet du använde för att "
-"installera &debian;, lägg bara till en post för &debian;-installationen till "
-"din befintliga <filename>yaboot.conf</filename>. Du kan även kopiera den "
-"till det nya systemet och redigera den där. Efter att du är klar med "
-"redigeringen, anropa ybin (kom ihåg att det använder <filename>yaboot.conf</"
-"filename> relativt till systemet du anropar det från)."
-
-#. Tag: para
-#: random-bits.xml:733
-#, no-c-format
-msgid ""
-"Here is a basic <filename>/etc/yaboot.conf</filename> as an example: "
-"<informalexample><screen>\n"
-"boot=/dev/sda2\n"
-"device=hd:\n"
-"partition=6\n"
-"root=/dev/sda6\n"
-"magicboot=/usr/lib/yaboot/ofboot\n"
-"timeout=50\n"
-"image=/vmlinux\n"
-"label=Debian\n"
-"</screen></informalexample> On some machines, you may need to use "
-"<userinput>ide0:</userinput> instead of <userinput>hd:</userinput>."
-msgstr ""
-"Här en en grundläggande <filename>/etc/yaboot.conf</filename> som ett "
-"exempel: <informalexample><screen>\n"
-"boot=/dev/sda2\n"
-"device=hd:\n"
-"partition=6\n"
-"root=/dev/sda6\n"
-"magicboot=/usr/lib/yaboot/ofboot\n"
-"timeout=50\n"
-"image=/vmlinux\n"
-"label=Debian\n"
-"</screen></informalexample> På vissa maskiner, kanske du behöver använda "
-"<userinput>ide0:</userinput> istället för <userinput>hd:</userinput>."
-
 #. Tag: title
-#: random-bits.xml:746
+#: random-bits.xml:756
 #, no-c-format
 msgid "Remote access: Installing SSH and setting up access"
 msgstr "Fjärråtkomst: installera SSH och konfigurera åtkomst"
 
 #. Tag: para
-#: random-bits.xml:747
+#: random-bits.xml:757
 #, no-c-format
 msgid ""
 "In case you can login to the system via console, you can skip this section. "
@@ -1637,7 +1554,7 @@ msgstr ""
 "till en icke-root-användare och ange ett lösenord:"
 
 #. Tag: screen
-#: random-bits.xml:771
+#: random-bits.xml:781
 #, no-c-format
 msgid ""
 "# adduser joe\n"
@@ -1647,13 +1564,13 @@ msgstr ""
 "# passwd joe"
 
 #. Tag: title
-#: random-bits.xml:776
+#: random-bits.xml:786
 #, no-c-format
 msgid "Finishing touches"
 msgstr "Slutgiltiga justeringar"
 
 #. Tag: para
-#: random-bits.xml:777
+#: random-bits.xml:787
 #, no-c-format
 msgid ""
 "As mentioned earlier, the installed system will be very basic. If you would "
@@ -1673,7 +1590,7 @@ msgstr ""
 "command> för att installera paket individuellt."
 
 #. Tag: para
-#: random-bits.xml:788
+#: random-bits.xml:798
 #, no-c-format
 msgid ""
 "After the installation there will be a lot of downloaded packages in "
@@ -1685,19 +1602,19 @@ msgstr ""
 "genom att köra:"
 
 #. Tag: screen
-#: random-bits.xml:794
+#: random-bits.xml:804
 #, no-c-format
 msgid "# apt clean"
 msgstr "# apt clean"
 
 #. Tag: title
-#: random-bits.xml:805
+#: random-bits.xml:815
 #, no-c-format
 msgid "Installing &debian-gnu; over Parallel Line IP (PLIP)"
 msgstr "Installera &debian-gnu; över Parallel Line IP (PLIP)"
 
 #. Tag: para
-#: random-bits.xml:807
+#: random-bits.xml:817
 #, no-c-format
 msgid ""
 "This section explains how to install &debian-gnu; on a computer without an "
@@ -1712,7 +1629,7 @@ msgstr ""
 "ansluten till ett nätverk som har en &debian;-spegel på sig (t.ex. Internet)."
 
 #. Tag: para
-#: random-bits.xml:815
+#: random-bits.xml:825
 #, no-c-format
 msgid ""
 "In the example in this appendix we will set up a PLIP connection using a "
@@ -1728,7 +1645,7 @@ msgstr ""
 "oanvända inom ditt nätverksadressintervall)."
 
 #. Tag: para
-#: random-bits.xml:823
+#: random-bits.xml:833
 #, no-c-format
 msgid ""
 "The PLIP connection set up during the installation will also be available "
@@ -1740,7 +1657,7 @@ msgstr ""
 "\"boot-new\"/>)."
 
 #. Tag: para
-#: random-bits.xml:828
+#: random-bits.xml:838
 #, no-c-format
 msgid ""
 "Before you start, you will need to check the BIOS configuration (IO base "
@@ -1753,13 +1670,13 @@ msgstr ""
 "värdena är <literal>io=0x378</literal> och <literal>irq=7</literal>."
 
 #. Tag: title
-#: random-bits.xml:838
+#: random-bits.xml:848
 #, no-c-format
 msgid "Requirements"
 msgstr "Krav"
 
 #. Tag: para
-#: random-bits.xml:841
+#: random-bits.xml:851
 #, no-c-format
 msgid ""
 "A target computer, called <emphasis>target</emphasis>, where &debian; will "
@@ -1769,13 +1686,13 @@ msgstr ""
 "installeras."
 
 #. Tag: para
-#: random-bits.xml:847
+#: random-bits.xml:857
 #, no-c-format
 msgid "System installation media; see <xref linkend=\"installation-media\"/>."
 msgstr "Systeminstallationsmedia; se <xref linkend=\"installation-media\"/>."
 
 #. Tag: para
-#: random-bits.xml:852
+#: random-bits.xml:862
 #, no-c-format
 msgid ""
 "Another computer connected to the Internet, called <emphasis>source</"
@@ -1785,7 +1702,7 @@ msgstr ""
 "som kommer att fungera som en gateway."
 
 #. Tag: para
-#: random-bits.xml:858
+#: random-bits.xml:868
 #, no-c-format
 msgid ""
 "A DB-25 Null-Modem cable. See the <ulink url=\"&url-plip-install-howto;"
@@ -1797,13 +1714,13 @@ msgstr ""
 "instruktioner hur man tillverkar en egen."
 
 #. Tag: title
-#: random-bits.xml:870
+#: random-bits.xml:880
 #, no-c-format
 msgid "Setting up source"
 msgstr "Ställ in källor"
 
 #. Tag: para
-#: random-bits.xml:871
+#: random-bits.xml:881
 #, no-c-format
 msgid ""
 "The following shell script is a simple example of how to configure the "
@@ -1813,7 +1730,7 @@ msgstr ""
 "en gateway till Internet med ppp0."
 
 #. Tag: screen
-#: random-bits.xml:876
+#: random-bits.xml:886
 #, no-c-format
 msgid ""
 "#!/bin/sh\n"
@@ -1855,13 +1772,13 @@ msgstr ""
 "echo 1 &gt; /proc/sys/net/ipv4/ip_forward"
 
 #. Tag: title
-#: random-bits.xml:882
+#: random-bits.xml:892
 #, no-c-format
 msgid "Installing target"
 msgstr "Installera måldatorn"
 
 #. Tag: para
-#: random-bits.xml:883
+#: random-bits.xml:893
 #, no-c-format
 msgid ""
 "Boot the installation media. The installation needs to be run in expert "
@@ -1888,13 +1805,13 @@ msgstr ""
 "stegen av installationen."
 
 #. Tag: guimenuitem
-#: random-bits.xml:902
+#: random-bits.xml:912
 #, no-c-format
 msgid "Load installer components from installation media"
 msgstr "Läs in installationskomponenter från installationsmedia"
 
 #. Tag: para
-#: random-bits.xml:904
+#: random-bits.xml:914
 #, no-c-format
 msgid ""
 "Select the <userinput>plip-modules</userinput> option from the list; this "
@@ -1904,13 +1821,13 @@ msgstr ""
 "göra drivrutinerna för PLIP tillgängliga för installationssystemet."
 
 #. Tag: guimenuitem
-#: random-bits.xml:912
+#: random-bits.xml:922
 #, no-c-format
 msgid "Detect network hardware"
 msgstr "Identifiera nätverksmaskinvara"
 
 #. Tag: para
-#: random-bits.xml:917
+#: random-bits.xml:927
 #, no-c-format
 msgid ""
 "If target <emphasis>does</emphasis> have a network card, a list of driver "
@@ -1925,7 +1842,7 @@ msgstr ""
 "installationsprogrammet inte att visa den här listan."
 
 #. Tag: para
-#: random-bits.xml:926
+#: random-bits.xml:936
 #, no-c-format
 msgid ""
 "Because no network card was detected/selected earlier, the installer will "
@@ -1938,19 +1855,19 @@ msgstr ""
 "userinput>."
 
 #. Tag: guimenuitem
-#: random-bits.xml:938
+#: random-bits.xml:948
 #, no-c-format
 msgid "Configure the network"
 msgstr "Konfigurera nätverket"
 
 #. Tag: para
-#: random-bits.xml:941
+#: random-bits.xml:951
 #, no-c-format
 msgid "Auto-configure network with DHCP: No"
 msgstr "Auto-konfigurera nätverk med DHCP: Nej"
 
 #. Tag: para
-#: random-bits.xml:946
+#: random-bits.xml:956
 #, no-c-format
 msgid ""
 "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
@@ -1958,7 +1875,7 @@ msgstr ""
 "IP-adress: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
 
 #. Tag: para
-#: random-bits.xml:951
+#: random-bits.xml:961
 #, no-c-format
 msgid ""
 "Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
@@ -1968,7 +1885,7 @@ msgstr ""
 "userinput>"
 
 #. Tag: para
-#: random-bits.xml:957
+#: random-bits.xml:967
 #, no-c-format
 msgid ""
 "Name server addresses: you can enter the same addresses used on source (see "
@@ -1978,13 +1895,13 @@ msgstr ""
 "<filename>/etc/resolv.conf</filename>)"
 
 #. Tag: title
-#: random-bits.xml:976
+#: random-bits.xml:986
 #, no-c-format
 msgid "Installing &debian-gnu; using PPP over Ethernet (PPPoE)"
 msgstr "Installera &debian-gnu; över PPP over Ethernet (PPPoE)"
 
 #. Tag: para
-#: random-bits.xml:978
+#: random-bits.xml:988
 #, no-c-format
 msgid ""
 "In some countries PPP over Ethernet (PPPoE) is a common protocol for "
@@ -2000,7 +1917,7 @@ msgstr ""
 "avsnittet förklarar hur man gör."
 
 #. Tag: para
-#: random-bits.xml:986
+#: random-bits.xml:996
 #, no-c-format
 msgid ""
 "The PPPoE connection set up during the installation will also be available "
@@ -2012,7 +1929,7 @@ msgstr ""
 "\"boot-new\"/>)."
 
 #. Tag: para
-#: random-bits.xml:991
+#: random-bits.xml:1001
 #, no-c-format
 msgid ""
 "To have the option of setting up and using PPPoE during the installation, "
@@ -2025,7 +1942,7 @@ msgstr ""
 "nätinstallation)."
 
 #. Tag: para
-#: random-bits.xml:998
+#: random-bits.xml:1008
 #, no-c-format
 msgid ""
 "Installing over PPPoE is mostly the same as any other installation. The "
@@ -2035,7 +1952,7 @@ msgstr ""
 "Följande steg förklarar skillnaderna."
 
 #. Tag: para
-#: random-bits.xml:1006
+#: random-bits.xml:1016
 #, no-c-format
 msgid ""
 "Boot the installer with the boot parameter <userinput>modules=ppp-udeb</"
@@ -2052,7 +1969,7 @@ msgstr ""
 "classname>) kommer att läsas in och köras automatiskt."
 
 #. Tag: para
-#: random-bits.xml:1021
+#: random-bits.xml:1031
 #, no-c-format
 msgid ""
 "Follow the regular initial steps of the installation (language, country and "
@@ -2072,7 +1989,7 @@ msgstr ""
 "uppstartsprompten. </para> </footnote>)."
 
 #. Tag: para
-#: random-bits.xml:1040
+#: random-bits.xml:1050
 #, no-c-format
 msgid ""
 "The next step is the detection of network hardware, in order to identify any "
@@ -2082,7 +1999,7 @@ msgstr ""
 "Ethernet-kort som finns anslutna till systemet."
 
 #. Tag: para
-#: random-bits.xml:1046
+#: random-bits.xml:1056
 #, no-c-format
 msgid ""
 "After this the actual setup of PPPoE is started. The installer will probe "
@@ -2095,7 +2012,7 @@ msgstr ""
 "anslutningar)."
 
 #. Tag: para
-#: random-bits.xml:1052
+#: random-bits.xml:1062
 #, no-c-format
 msgid ""
 "It is possible that the concentrator will not to be found at the first "
@@ -2112,7 +2029,7 @@ msgstr ""
 "installationsprogrammet."
 
 #. Tag: para
-#: random-bits.xml:1061
+#: random-bits.xml:1071
 #, no-c-format
 msgid ""
 "After a concentrator is found, the user will be prompted to type the login "
@@ -2123,7 +2040,7 @@ msgstr ""
 "anslutningen)."
 
 #. Tag: para
-#: random-bits.xml:1067
+#: random-bits.xml:1077
 #, no-c-format
 msgid ""
 "At this point the installer will use the provided information to establish "
@@ -2143,6 +2060,83 @@ msgstr ""
 "startas om igen genom att välja menyposten <guimenuitem>Konfigurera och "
 "starta en PPPoE-anslutning</guimenuitem>."
 
+#, no-c-format
+#~ msgid ""
+#~ "Modern kernels give you the capability to emulate a three-button mouse "
+#~ "when your mouse only has one button. Just add the following lines to "
+#~ "<filename>/etc/sysctl.conf</filename> file."
+#~ msgstr ""
+#~ "Moderna kärnor ger dig möjligheten att emulera en tre-knappars mus när "
+#~ "din mus endast har en knapp. Lägg helt enkelt till följande rader till "
+#~ "filen <filename>/etc/sysctl.conf</filename>."
+
+#, no-c-format
+#~ msgid ""
+#~ "# 3-button mouse emulation\n"
+#~ "# turn on emulation\n"
+#~ "/dev/mac_hid/mouse_button_emulation = 1\n"
+#~ "# Send middle mouse button signal with the F11 key\n"
+#~ "/dev/mac_hid/mouse_button2_keycode = 87\n"
+#~ "# Send right mouse button signal with the F12 key\n"
+#~ "/dev/mac_hid/mouse_button3_keycode = 88\n"
+#~ "# For different keys, use showkey to tell you what the code is."
+#~ msgstr ""
+#~ "# Emulering av 3-knapparsmus\n"
+#~ "# aktivera emulering\n"
+#~ "/dev/mac_hid/mouse_button_emulation = 1\n"
+#~ "# Skicka mittenmusknappssignal med tangenten F11\n"
+#~ "/dev/mac_hid/mouse_button2_keycode = 87\n"
+#~ "# Skicka högermusknappssignal med tangenten F12\n"
+#~ "/dev/mac_hid/mouse_button3_keycode = 88\n"
+#~ "# För andra tangenter, använd showkey för att visa dig vilken koden är."
+
+#, no-c-format
+#~ msgid ""
+#~ "Check <userinput>man yaboot.conf</userinput> for instructions on setting "
+#~ "up the bootloader. If you are keeping the system you used to install "
+#~ "&debian;, just add an entry for the &debian; install to your existing "
+#~ "<filename>yaboot.conf</filename>. You could also copy it to the new "
+#~ "system and edit it there. After you are done editing, call ybin (remember "
+#~ "it will use <filename>yaboot.conf</filename> relative to the system you "
+#~ "call it from)."
+#~ msgstr ""
+#~ "Kontrollera <userinput>man yaboot.conf</userinput> för instruktioner om "
+#~ "hur man ställer in starthanteraren. Om du behåller systemet du använde "
+#~ "för att installera &debian;, lägg bara till en post för &debian;-"
+#~ "installationen till din befintliga <filename>yaboot.conf</filename>. Du "
+#~ "kan även kopiera den till det nya systemet och redigera den där. Efter "
+#~ "att du är klar med redigeringen, anropa ybin (kom ihåg att det använder "
+#~ "<filename>yaboot.conf</filename> relativt till systemet du anropar det "
+#~ "från)."
+
+#, no-c-format
+#~ msgid ""
+#~ "Here is a basic <filename>/etc/yaboot.conf</filename> as an example: "
+#~ "<informalexample><screen>\n"
+#~ "boot=/dev/sda2\n"
+#~ "device=hd:\n"
+#~ "partition=6\n"
+#~ "root=/dev/sda6\n"
+#~ "magicboot=/usr/lib/yaboot/ofboot\n"
+#~ "timeout=50\n"
+#~ "image=/vmlinux\n"
+#~ "label=Debian\n"
+#~ "</screen></informalexample> On some machines, you may need to use "
+#~ "<userinput>ide0:</userinput> instead of <userinput>hd:</userinput>."
+#~ msgstr ""
+#~ "Här en en grundläggande <filename>/etc/yaboot.conf</filename> som ett "
+#~ "exempel: <informalexample><screen>\n"
+#~ "boot=/dev/sda2\n"
+#~ "device=hd:\n"
+#~ "partition=6\n"
+#~ "root=/dev/sda6\n"
+#~ "magicboot=/usr/lib/yaboot/ofboot\n"
+#~ "timeout=50\n"
+#~ "image=/vmlinux\n"
+#~ "label=Debian\n"
+#~ "</screen></informalexample> På vissa maskiner, kanske du behöver använda "
+#~ "<userinput>ide0:</userinput> istället för <userinput>hd:</userinput>."
+
 #~ msgid "Print server"
 #~ msgstr "Utskriftsserver"