Update PO files after removal of alpha

1 files changed, 246 insertions, 266 deletions

diff --git a/po/sv/install-methods.po b/po/sv/install-methods.po
index a9a084a06..eac65bc4f 100644
--- a/po/sv/install-methods.po
+++ b/po/sv/install-methods.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: install-methods\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2009-11-02 22:05+0000\n"
+"POT-Creation-Date: 2009-11-02 22:19+0000\n"
 "PO-Revision-Date: 2009-07-26 12:34+0100\n"
 "Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
 "Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
@@ -165,74 +165,13 @@ msgstr ""
 "dess funktion."
 
 #. Tag: title
-#: install-methods.xml:112
-#, no-c-format
-msgid "Alpha Installation Files"
-msgstr "Installationsfiler för Alpha"
-
-#. Tag: para
 #: install-methods.xml:113
 #, no-c-format
-msgid ""
-"If you choose to boot from ARC console firmware using <command>MILO</"
-"command>, you will also need to prepare a disk containing <command>MILO</"
-"command> and <command>LINLOAD.EXE</command> from the provided disk images. "
-"See <xref linkend=\"alpha-firmware\"/> for more information on Alpha "
-"firmware and boot loaders. The floppy images can be found in the "
-"<filename>MILO</filename> directory as "
-"<filename>milo_<replaceable>subarchitecture</replaceable>.bin</filename>."
-msgstr ""
-"Om du väljer att starta från ARC-konsollens firmware med <command>MILO</"
-"command> behöver du att förbereda en disk som innehåller <command>MILO</"
-"command> och <command>LINLOAD.EXE</command> från den angivna "
-"diskavbildningen. Se <xref linkend=\"alpha-firmware\"/> för mer information "
-"om Alpha-firmware och starthanterare. Diskettavbildningar kan hittas i "
-"katalogen <filename>MILO</filename> som "
-"<filename>milo_<replaceable>underarkitektur</replaceable>.bin</filename>."
-
-#. Tag: para
-#: install-methods.xml:124
-#, no-c-format
-msgid ""
-"Unfortunately, these <command>MILO</command> images could not be tested and "
-"might not work for all subarchitectures. If you find it doesn't work for "
-"you, try copying the appropriate <command>MILO</command> binary onto the "
-"floppy (<ulink url=\"&disturlftp;main/disks-alpha/current/MILO/\"></ulink>). "
-"Note that those <command>MILO</command>s don't support ext2 <quote>sparse "
-"superblocks</quote>, so you can't use them to load kernels from newly "
-"generated ext2 file systems. As a workaround, you can put your kernel onto "
-"the FAT partition next to the <command>MILO</command>."
-msgstr ""
-"Tyvärr, de här <command>MILO</command>-avbildningarna kunde inte testas och "
-"kanske inte fungerar för alla underarkitekturer. Om du upptäcker att de inte "
-"fungerar för dig, försök att kopiera den lämpliga <command>MILO</command> "
-"binären till disketten (<ulink url=\"&disturlftp;main/disks-alpha/current/"
-"MILO/\"></ulink>). Observera att de här <command>MILO</command>:arna inte "
-"har stöd för <quote>sparse superblocks</quote> i ext2, så du kan inte "
-"använda dem för att läsa in kärnor från nyligen genererade ext2-filsystem. "
-"En lösning är att du kan lägga din kärna på FAT-partitionen bredvid "
-"<command>MILO</command>."
-
-#. Tag: para
-#: install-methods.xml:136
-#, no-c-format
-msgid ""
-"<command>MILO</command> binaries are platform-specific. See <xref linkend="
-"\"alpha-cpus\"/> to determine the appropriate <command>MILO</command> image "
-"for your Alpha platform."
-msgstr ""
-"<command>MILO</command>-binärer är plattformsspecifika. Se <xref linkend="
-"\"alpha-cpus\"/> för att fastställa den lämpliga <command>MILO</command>-"
-"avbildningen för din Alpha-plattform."
-
-#. Tag: title
-#: install-methods.xml:151
-#, no-c-format
 msgid "NSLU2 Installation Files"
 msgstr "Installationsfiler för NSLU2"
 
 #. Tag: para
-#: install-methods.xml:152
+#: install-methods.xml:114
 #, no-c-format
 msgid ""
 "A firmware image is provided for the Linksys NSLU2 which will automatically "
@@ -247,13 +186,13 @@ msgstr ""
 "firmware-img;."
 
 #. Tag: title
-#: install-methods.xml:164
+#: install-methods.xml:126
 #, no-c-format
 msgid "Thecus N2100 Installation Files"
 msgstr "Installationsfiler för Thecus N2100"
 
 #. Tag: para
-#: install-methods.xml:165
+#: install-methods.xml:127
 #, no-c-format
 msgid ""
 "A firmware image is provided for the Thecus N2100 which will automatically "
@@ -268,13 +207,13 @@ msgstr ""
 "från &n2100-firmware-img;."
 
 #. Tag: title
-#: install-methods.xml:176
+#: install-methods.xml:138
 #, no-c-format
 msgid "GLAN Tank Installation Files"
 msgstr "Installationsfiler för GLAN Tank"
 
 #. Tag: para
-#: install-methods.xml:177
+#: install-methods.xml:139
 #, no-c-format
 msgid ""
 "The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk "
@@ -286,13 +225,13 @@ msgstr ""
 "firmware-img;."
 
 #. Tag: title
-#: install-methods.xml:187
+#: install-methods.xml:149
 #, no-c-format
 msgid "Kurobox Pro Installation Files"
 msgstr "Installationsfiler för Kurobox Pro"
 
 #. Tag: para
-#: install-methods.xml:188
+#: install-methods.xml:150
 #, no-c-format
 msgid ""
 "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the "
@@ -304,13 +243,13 @@ msgstr ""
 "&kuroboxpro-firmware-img;."
 
 #. Tag: title
-#: install-methods.xml:198
+#: install-methods.xml:160
 #, no-c-format
 msgid "HP mv2120 Installation Files"
 msgstr "Installationsfiler för HP mv2120"
 
 #. Tag: para
-#: install-methods.xml:199
+#: install-methods.xml:161
 #, no-c-format
 msgid ""
 "A firmware image is provided for the HP mv2120 which will automatically boot "
@@ -326,13 +265,13 @@ msgstr ""
 "programvaruavbildningen kan hämtas från &mv2120-firmware-img;."
 
 #. Tag: title
-#: install-methods.xml:211
+#: install-methods.xml:173
 #, no-c-format
 msgid "QNAP Turbo Station Installation Files"
 msgstr "Installationsfiler för QNAP Turbo Station"
 
 #. Tag: para
-#: install-methods.xml:212
+#: install-methods.xml:174
 #, no-c-format
 msgid ""
 "The QNAP Turbo Station (TS-109, TS-209 and TS-409) requires a kernel and "
@@ -344,13 +283,13 @@ msgstr ""
 "dessa avbildningar till flashminnet."
 
 #. Tag: title
-#: install-methods.xml:262
+#: install-methods.xml:224
 #, no-c-format
 msgid "Creating an IPL tape"
 msgstr "Skapa ett IPL-band"
 
 #. Tag: para
-#: install-methods.xml:264
+#: install-methods.xml:226
 #, no-c-format
 msgid ""
 "If you can't boot (IPL) from the CD-ROM and you are not using VM you need to "
@@ -372,13 +311,13 @@ msgstr ""
 "underkatalogen <filename>tape</filename>, se <xref linkend=\"where-files\"/>."
 
 #. Tag: title
-#: install-methods.xml:288
+#: install-methods.xml:250
 #, no-c-format
 msgid "Creating Floppies from Disk Images"
 msgstr "Skapa startdisketter från diskettavbildningar"
 
 #. Tag: para
-#: install-methods.xml:289
+#: install-methods.xml:251
 #, no-c-format
 msgid ""
 "Bootable floppy disks are generally used as a last resort to boot the "
@@ -389,7 +328,7 @@ msgstr ""
 "på andra sätt."
 
 #. Tag: para
-#: install-methods.xml:294
+#: install-methods.xml:256
 #, no-c-format
 msgid ""
 "Booting the installer from floppy disk reportedly fails on Mac USB floppy "
@@ -399,7 +338,7 @@ msgstr ""
 "diskettenheter enligt rapporter."
 
 #. Tag: para
-#: install-methods.xml:299
+#: install-methods.xml:261
 #, no-c-format
 msgid ""
 "Disk images are files containing the complete contents of a floppy disk in "
@@ -419,7 +358,7 @@ msgstr ""
 "en <emphasis>sektorkopiering</emphasis> av data från filen till disketten."
 
 #. Tag: para
-#: install-methods.xml:310
+#: install-methods.xml:272
 #, no-c-format
 msgid ""
 "There are different techniques for creating floppies from disk images. This "
@@ -431,7 +370,7 @@ msgstr ""
 "diskettavbildningar på olika plattformar."
 
 #. Tag: para
-#: install-methods.xml:316
+#: install-methods.xml:278
 #, no-c-format
 msgid ""
 "Before you can create the floppies, you will first need to download them "
@@ -445,7 +384,7 @@ msgstr ""
 "diskettavbildningarna finnas inkluderade på skivan.</phrase>"
 
 #. Tag: para
-#: install-methods.xml:324
+#: install-methods.xml:286
 #, no-c-format
 msgid ""
 "No matter which method you use to create your floppies, you should remember "
@@ -457,13 +396,13 @@ msgstr ""
 "att vara säker på att de inte oavsiktligt ändras."
 
 #. Tag: title
-#: install-methods.xml:332
+#: install-methods.xml:294
 #, no-c-format
 msgid "Writing Disk Images From a Linux or Unix System"
 msgstr "Skriva diskettavbildningar från ett Linux eller Unix-system"
 
 #. Tag: para
-#: install-methods.xml:333
+#: install-methods.xml:295
 #, no-c-format
 msgid ""
 "To write the floppy disk image files to the floppy disks, you will probably "
@@ -499,7 +438,7 @@ msgstr ""
 "<command>eject</command>, se manualsidan)</phrase>."
 
 #. Tag: para
-#: install-methods.xml:354
+#: install-methods.xml:316
 #, no-c-format
 msgid ""
 "Some systems attempt to automatically mount a floppy disk when you place it "
@@ -533,7 +472,7 @@ msgstr ""
 "systemadministratör. </phrase>"
 
 #. Tag: para
-#: install-methods.xml:375
+#: install-methods.xml:337
 #, no-c-format
 msgid ""
 "If writing a floppy on powerpc Linux, you will need to eject it. The "
@@ -545,13 +484,13 @@ msgstr ""
 "installera det."
 
 #. Tag: title
-#: install-methods.xml:393
+#: install-methods.xml:355
 #, no-c-format
 msgid "Writing Disk Images From DOS, Windows, or OS/2"
 msgstr "Skriva diskettavbildningar från DOS, Windows eller OS/2"
 
 #. Tag: para
-#: install-methods.xml:395
+#: install-methods.xml:357
 #, no-c-format
 msgid ""
 "If you have access to an i386 or amd64 machine, you can use one of the "
@@ -561,7 +500,7 @@ msgstr ""
 "följande program för att kopiera avbildningar till disketter."
 
 #. Tag: para
-#: install-methods.xml:400
+#: install-methods.xml:362
 #, no-c-format
 msgid ""
 "The <command>rawrite1</command> and <command>rawrite2</command> programs can "
@@ -577,7 +516,7 @@ msgstr ""
 "Utforskaren i Windows kommer <emphasis>inte</emphasis> att fungera."
 
 #. Tag: para
-#: install-methods.xml:408
+#: install-methods.xml:370
 #, no-c-format
 msgid ""
 "The <command>rwwrtwin</command> program runs on Windows 95, NT, 98, 2000, "
@@ -589,7 +528,7 @@ msgstr ""
 "packa upp diskio.dll i samma katalog."
 
 #. Tag: para
-#: install-methods.xml:414
+#: install-methods.xml:376
 #, no-c-format
 msgid ""
 "These tools can be found on the Official Debian CD-ROMs under the <filename>/"
@@ -599,13 +538,13 @@ msgstr ""
 "katalogen <filename>/tools</filename>."
 
 #. Tag: title
-#: install-methods.xml:427
+#: install-methods.xml:389
 #, no-c-format
 msgid "Writing Disk Images From MacOS"
 msgstr "Skriva diskettavbildningar från MacOS"
 
 #. Tag: para
-#: install-methods.xml:428
+#: install-methods.xml:390
 #, no-c-format
 msgid ""
 "An AppleScript, <application>Make Debian Floppy</application>, is available "
@@ -627,7 +566,7 @@ msgstr ""
 "fortsätta att skriva filavbildningen till den."
 
 #. Tag: para
-#: install-methods.xml:439
+#: install-methods.xml:401
 #, no-c-format
 msgid ""
 "You can also use the MacOS utility <command>Disk Copy</command> directly, or "
@@ -642,13 +581,13 @@ msgstr ""
 "verktygen."
 
 #. Tag: title
-#: install-methods.xml:450
+#: install-methods.xml:412
 #, no-c-format
 msgid "Writing Disk Images with <command>Disk Copy</command>"
 msgstr "Skriva diskettavbildningar med <command>Disk Copy</command>"
 
 #. Tag: para
-#: install-methods.xml:451
+#: install-methods.xml:413
 #, no-c-format
 msgid ""
 "If you are creating the floppy image from files which were originally on the "
@@ -662,7 +601,7 @@ msgstr ""
 "du hämtade avbildningsfilerna från en Debian-spegel."
 
 #. Tag: para
-#: install-methods.xml:460
+#: install-methods.xml:422
 #, no-c-format
 msgid ""
 "Obtain <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</ulink> "
@@ -672,7 +611,7 @@ msgstr ""
 "ulink> och använd den för att öppna filen <filename>root.bin</filename>."
 
 #. Tag: para
-#: install-methods.xml:467
+#: install-methods.xml:429
 #, no-c-format
 msgid ""
 "Change the Creator to <userinput>ddsk</userinput> (Disk Copy), and the Type "
@@ -684,7 +623,7 @@ msgstr ""
 "skiftkänsliga."
 
 #. Tag: para
-#: install-methods.xml:474
+#: install-methods.xml:436
 #, no-c-format
 msgid ""
 "<emphasis>Important:</emphasis> In the Finder, use <userinput>Get Info</"
@@ -699,7 +638,7 @@ msgstr ""
 "MacOS inte kan ta bort startblocken om avbildningen monteras av misstag."
 
 #. Tag: para
-#: install-methods.xml:483
+#: install-methods.xml:445
 #, no-c-format
 msgid ""
 "Obtain <command>Disk Copy</command>; if you have a MacOS system or CD it "
@@ -711,7 +650,7 @@ msgstr ""
 "diskcopy;\"></ulink>."
 
 #. Tag: para
-#: install-methods.xml:490
+#: install-methods.xml:452
 #, no-c-format
 msgid ""
 "Run <command>Disk Copy</command>, and select <menuchoice> "
@@ -727,13 +666,13 @@ msgstr ""
 "vill radera den. När den är klar ska den mata ut disketten."
 
 #. Tag: title
-#: install-methods.xml:505
+#: install-methods.xml:467
 #, no-c-format
 msgid "Writing Disk Images with <command>suntar</command>"
 msgstr "Skriva diskettavbildningar med <command>suntar</command>"
 
 #. Tag: para
-#: install-methods.xml:509
+#: install-methods.xml:471
 #, no-c-format
 msgid ""
 "Obtain <command>suntar</command> from <ulink url=\"&url-powerpc-suntar;\"> </"
@@ -747,7 +686,7 @@ msgstr ""
 "userinput>."
 
 #. Tag: para
-#: install-methods.xml:517
+#: install-methods.xml:479
 #, no-c-format
 msgid ""
 "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)."
@@ -755,14 +694,14 @@ msgstr ""
 "Mata in disketten enligt begäran, tryck sedan &enterkey; (start på sektor 0)."
 
 #. Tag: para
-#: install-methods.xml:523
+#: install-methods.xml:485
 #, no-c-format
 msgid ""
 "Select the <filename>root.bin</filename> file in the file-opening dialog."
 msgstr "Välj filen <filename>root.bin</filename> i filöppningsdialogen."
 
 #. Tag: para
-#: install-methods.xml:528
+#: install-methods.xml:490
 #, no-c-format
 msgid ""
 "After the floppy has been created successfully, select <menuchoice> "
@@ -776,7 +715,7 @@ msgstr ""
 "annan."
 
 #. Tag: para
-#: install-methods.xml:536
+#: install-methods.xml:498
 #, no-c-format
 msgid ""
 "Before using the floppy you created, <emphasis>set the write protect tab</"
@@ -787,13 +726,13 @@ msgstr ""
 "emphasis>! Om du av misstag monterar den i MacOS kommer MacOS förstöra den."
 
 #. Tag: title
-#: install-methods.xml:555
+#: install-methods.xml:517
 #, no-c-format
 msgid "Preparing Files for USB Memory Stick Booting"
 msgstr "Förbereda filer för uppstart med USB-minne"
 
 #. Tag: para
-#: install-methods.xml:557
+#: install-methods.xml:519
 #, no-c-format
 msgid ""
 "There are two installation methods possible when booting from USB stick. The "
@@ -808,7 +747,7 @@ msgstr ""
 "vanliga."
 
 #. Tag: para
-#: install-methods.xml:565
+#: install-methods.xml:527
 #, no-c-format
 msgid ""
 "For the first installation method you'll need to download an installer image "
@@ -823,7 +762,7 @@ msgstr ""
 "till USB-minnet."
 
 #. Tag: para
-#: install-methods.xml:573
+#: install-methods.xml:535
 #, no-c-format
 msgid ""
 "Installation images for the second installation method can be found in the "
@@ -851,7 +790,7 @@ msgstr ""
 "footnote> under installationen."
 
 #. Tag: para
-#: install-methods.xml:592
+#: install-methods.xml:554
 #, no-c-format
 msgid ""
 "To prepare the USB stick, you will need a system where GNU/Linux is already "
@@ -875,7 +814,7 @@ msgstr ""
 "minne så måste du stänga av dess skrivskydd (om sådant finns)."
 
 #. Tag: para
-#: install-methods.xml:606
+#: install-methods.xml:568
 #, no-c-format
 msgid ""
 "The procedures described in this section will destroy anything already on "
@@ -889,7 +828,7 @@ msgstr ""
 "information går förlorad på till exempel en hårddisk."
 
 #. Tag: para
-#: install-methods.xml:614
+#: install-methods.xml:576
 #, no-c-format
 msgid ""
 "Note that the USB stick should be at least 256 MB in size (smaller setups "
@@ -899,13 +838,13 @@ msgstr ""
 "är möjliga om du följer <xref linkend=\"usb-copy-flexible\"/>)."
 
 #. Tag: title
-#: install-methods.xml:622
+#: install-methods.xml:584
 #, no-c-format
 msgid "Copying the files &mdash; the easy way"
 msgstr "Kopiera filerna &mdash; det enkla sättet"
 
 #. Tag: para
-#: install-methods.xml:623
+#: install-methods.xml:585
 #, no-c-format
 msgid ""
 "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> which "
@@ -921,7 +860,7 @@ msgstr ""
 "<command>yaboot</command> och dess konfigurationsfil.</phrase>"
 
 #. Tag: para
-#: install-methods.xml:632
+#: install-methods.xml:594
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -942,7 +881,7 @@ msgstr ""
 "eller nätinstallation."
 
 #. Tag: para
-#: install-methods.xml:642
+#: install-methods.xml:604
 #, no-c-format
 msgid "To use this image simply extract it directly to your USB stick:"
 msgstr ""
@@ -950,13 +889,13 @@ msgstr ""
 "till ditt USB-minne:"
 
 #. Tag: screen
-#: install-methods.xml:646
+#: install-methods.xml:608
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:648
+#: install-methods.xml:610
 #, no-c-format
 msgid ""
 "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
@@ -968,13 +907,13 @@ msgstr ""
 "extrahera avbildningen direkt till den:"
 
 #. Tag: screen
-#: install-methods.xml:654
+#: install-methods.xml:616
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:656
+#: install-methods.xml:618
 #, no-c-format
 msgid ""
 "After that, mount the USB memory stick <phrase arch=\"x86\">"
@@ -996,13 +935,13 @@ msgstr ""
 "färdig."
 
 #. Tag: title
-#: install-methods.xml:673
+#: install-methods.xml:635
 #, no-c-format
 msgid "Copying the files &mdash; the flexible way"
 msgstr "Kopiera filerna &mdash; det flexibla sättet"
 
 #. Tag: para
-#: install-methods.xml:674
+#: install-methods.xml:636
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -1018,13 +957,13 @@ msgstr ""
 "avbildning till det."
 
 #. Tag: title
-#: install-methods.xml:689 install-methods.xml:786
+#: install-methods.xml:651 install-methods.xml:748
 #, no-c-format
 msgid "Partitioning the USB stick"
 msgstr "Partitionera USB-minnet"
 
 #. Tag: para
-#: install-methods.xml:690
+#: install-methods.xml:652
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -1034,7 +973,7 @@ msgstr ""
 "partitionen, istället för hela enheten."
 
 #. Tag: para
-#: install-methods.xml:695
+#: install-methods.xml:657
 #, no-c-format
 msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
@@ -1058,7 +997,7 @@ msgstr ""
 "i Debian-paketet <classname>dosfstools</classname>."
 
 #. Tag: para
-#: install-methods.xml:709
+#: install-methods.xml:671
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -1077,7 +1016,7 @@ msgstr ""
 "konfigurationen av starthanteraren."
 
 #. Tag: para
-#: install-methods.xml:719
+#: install-methods.xml:681
 #, no-c-format
 msgid ""
 "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
@@ -1102,13 +1041,13 @@ msgstr ""
 "starthanterarens programkod."
 
 #. Tag: title
-#: install-methods.xml:736 install-methods.xml:833
+#: install-methods.xml:698 install-methods.xml:795
 #, no-c-format
 msgid "Adding the installer image"
 msgstr "Lägg till installationsavbildningen"
 
 #. Tag: para
-#: install-methods.xml:737
+#: install-methods.xml:699
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
@@ -1132,7 +1071,7 @@ msgstr ""
 "<command>syslinux</command> endast kan behandla DOS-filnamn (8.3)."
 
 #. Tag: para
-#: install-methods.xml:761
+#: install-methods.xml:723
 #, no-c-format
 msgid ""
 "Next you should create a <filename>syslinux.cfg</filename> configuration "
@@ -1152,7 +1091,7 @@ msgstr ""
 "andra raden."
 
 #. Tag: para
-#: install-methods.xml:771 install-methods.xml:873
+#: install-methods.xml:733 install-methods.xml:835
 #, no-c-format
 msgid ""
 "If you used an <filename>hd-media</filename> image, you should now copy a "
@@ -1167,7 +1106,7 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)."
 
 #. Tag: para
-#: install-methods.xml:787
+#: install-methods.xml:749
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -1197,7 +1136,7 @@ msgstr ""
 "i Debian-paketet <classname>hfsutils</classname>."
 
 #. Tag: para
-#: install-methods.xml:804
+#: install-methods.xml:766
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -1213,7 +1152,7 @@ msgstr ""
 "för att göra ändringar i konfigurationen för starthanteraren."
 
 #. Tag: para
-#: install-methods.xml:813
+#: install-methods.xml:775
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -1249,7 +1188,7 @@ msgstr ""
 "de vanliga Unix-verktygen."
 
 #. Tag: para
-#: install-methods.xml:834
+#: install-methods.xml:796
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
@@ -1260,31 +1199,31 @@ msgstr ""
 "minnet:"
 
 #. Tag: para
-#: install-methods.xml:841
+#: install-methods.xml:803
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (kärnbinär)"
 
 #. Tag: para
-#: install-methods.xml:846
+#: install-methods.xml:808
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (initiell ramdiskavbildning)"
 
 #. Tag: para
-#: install-methods.xml:851
+#: install-methods.xml:813
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (yaboots konfigurationsfil)"
 
 #. Tag: para
-#: install-methods.xml:856
+#: install-methods.xml:818
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (valfritt uppstartsmeddelande)"
 
 #. Tag: para
-#: install-methods.xml:863
+#: install-methods.xml:825
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -1319,13 +1258,13 @@ msgstr ""
 "userinput> kan behöva ökas, beroende på avbildningen du startar upp."
 
 #. Tag: title
-#: install-methods.xml:888
+#: install-methods.xml:850
 #, no-c-format
 msgid "Booting the USB stick"
 msgstr "Starta upp på USB-minne"
 
 #. Tag: para
-#: install-methods.xml:889
+#: install-methods.xml:851
 #, no-c-format
 msgid ""
 "If your system refuses to boot from the memory stick, the stick may contain "
@@ -1338,19 +1277,19 @@ msgstr ""
 "classname>:"
 
 #. Tag: screen
-#: install-methods.xml:896
+#: install-methods.xml:858
 #, no-c-format
 msgid "# install-mbr /dev/<replaceable>sdX</replaceable>"
 msgstr "# install-mbr /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: title
-#: install-methods.xml:907
+#: install-methods.xml:869
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "Förbereda filer för uppstart med hårddisk"
 
 #. Tag: para
-#: install-methods.xml:908
+#: install-methods.xml:870
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -1362,7 +1301,7 @@ msgstr ""
 "eller genom att kalla upp en starthanterare direkt från BIOS."
 
 #. Tag: para
-#: install-methods.xml:914
+#: install-methods.xml:876
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1376,14 +1315,14 @@ msgstr ""
 "disketter."
 
 #. Tag: para
-#: install-methods.xml:921
+#: install-methods.xml:883
 #, no-c-format
 msgid "The installer cannot boot from files on an NTFS file system."
 msgstr ""
 "Installationsprogrammet kan inte starta upp från filer på ett NTFS-filsystem."
 
 #. Tag: para
-#: install-methods.xml:925
+#: install-methods.xml:887
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1405,7 +1344,7 @@ msgstr ""
 "installationsfilerna du hämtade."
 
 #. Tag: para
-#: install-methods.xml:936
+#: install-methods.xml:898
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1417,7 +1356,7 @@ msgstr ""
 "<quote>OldWorld</quote>-modell."
 
 #. Tag: title
-#: install-methods.xml:945
+#: install-methods.xml:907
 #, no-c-format
 msgid ""
 "Hard disk installer booting using <command>LILO</command> or <command>GRUB</"
@@ -1427,7 +1366,7 @@ msgstr ""
 "<command>GRUB</command>"
 
 #. Tag: para
-#: install-methods.xml:947
+#: install-methods.xml:909
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1438,7 +1377,7 @@ msgstr ""
 "command>."
 
 #. Tag: para
-#: install-methods.xml:953
+#: install-methods.xml:915
 #, no-c-format
 msgid ""
 "At boot time, both bootloaders support loading in memory not only the "
@@ -1450,7 +1389,7 @@ msgstr ""
 "av kärnan."
 
 #. Tag: para
-#: install-methods.xml:959
+#: install-methods.xml:921
 #, no-c-format
 msgid ""
 "Copy the following files from the Debian archives to a convenient location "
@@ -1460,19 +1399,19 @@ msgstr ""
 "hårddisk, till exempel till <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:966
+#: install-methods.xml:928
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (kärnbinär)"
 
 #. Tag: para
-#: install-methods.xml:971
+#: install-methods.xml:933
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (ramdiskavbildning)"
 
 #. Tag: para
-#: install-methods.xml:978
+#: install-methods.xml:940
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1482,13 +1421,13 @@ msgstr ""
 "linkend=\"boot-initrd\"/>."
 
 #. Tag: title
-#: install-methods.xml:988
+#: install-methods.xml:950
 #, no-c-format
 msgid "Hard Disk Installer Booting for OldWorld Macs"
 msgstr "Uppstart av hårddiskinstallerare på OldWorld Mac"
 
 #. Tag: para
-#: install-methods.xml:989
+#: install-methods.xml:951
 #, no-c-format
 msgid ""
 "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</"
@@ -1512,7 +1451,7 @@ msgstr ""
 "<application>BootX</application> krävs på den modellen."
 
 #. Tag: para
-#: install-methods.xml:1002
+#: install-methods.xml:964
 #, no-c-format
 msgid ""
 "Download and unstuff the <application>BootX</application> distribution, "
@@ -1540,13 +1479,13 @@ msgstr ""
 "i den aktiva Systemmappen."
 
 #. Tag: title
-#: install-methods.xml:1022
+#: install-methods.xml:984
 #, no-c-format
 msgid "Hard Disk Installer Booting for NewWorld Macs"
 msgstr "Uppstart av hårddiskinstallerare på NewWorld Mac"
 
 #. Tag: para
-#: install-methods.xml:1023
+#: install-methods.xml:985
 #, no-c-format
 msgid ""
 "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as "
@@ -1567,7 +1506,7 @@ msgstr ""
 "NewWorld PowerMac."
 
 #. Tag: para
-#: install-methods.xml:1034
+#: install-methods.xml:996
 #, no-c-format
 msgid ""
 "<emphasis>Copy</emphasis> (not move) the following four files which you "
@@ -1581,31 +1520,31 @@ msgstr ""
 "hårddisksikonen)."
 
 #. Tag: filename
-#: install-methods.xml:1044 install-methods.xml:1399
+#: install-methods.xml:1006 install-methods.xml:1344
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1049 install-methods.xml:1404
+#: install-methods.xml:1011 install-methods.xml:1349
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1054 install-methods.xml:1409
+#: install-methods.xml:1016 install-methods.xml:1354
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1059 install-methods.xml:1414
+#: install-methods.xml:1021 install-methods.xml:1359
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: para
-#: install-methods.xml:1064
+#: install-methods.xml:1026
 #, no-c-format
 msgid ""
 "Make a note of the partition number of the MacOS partition where you place "
@@ -1621,7 +1560,7 @@ msgstr ""
 "prompten när du startar upp installationsprogrammet."
 
 #. Tag: para
-#: install-methods.xml:1072
+#: install-methods.xml:1034
 #, no-c-format
 msgid "To boot the installer, proceed to <xref linkend=\"boot-newworld\"/>."
 msgstr ""
@@ -1629,13 +1568,13 @@ msgstr ""
 "\"boot-newworld\"/>."
 
 #. Tag: title
-#: install-methods.xml:1085
+#: install-methods.xml:1047
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Förbered filerna för nätverksuppstart via TFTP"
 
 #. Tag: para
-#: install-methods.xml:1086
+#: install-methods.xml:1048
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1651,7 +1590,7 @@ msgstr ""
 "att få stöd för uppstart av din specifika maskin."
 
 #. Tag: para
-#: install-methods.xml:1094
+#: install-methods.xml:1056
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1663,7 +1602,7 @@ msgstr ""
 "phrase><phrase condition=\"supports-bootp\">, eller BOOTP-server</phrase>."
 
 #. Tag: para
-#: install-methods.xml:1101
+#: install-methods.xml:1063
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1684,7 +1623,7 @@ msgstr ""
 "konfigureras via DHCP."
 
 #. Tag: para
-#: install-methods.xml:1115
+#: install-methods.xml:1077
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1696,31 +1635,7 @@ msgstr ""
 "starta upp via BOOTP."
 
 #. Tag: para
-#: install-methods.xml:1121
-#, no-c-format
-msgid ""
-"Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM "
-"console will <emphasis>not</emphasis> use RARP to obtain its IP address, and "
-"therefore you must use BOOTP for net booting your Alpha<footnote> <para> "
-"Alpha systems can also be net-booted using the DECNet MOP (Maintenance "
-"Operations Protocol), but this is not covered here. Presumably, your local "
-"OpenVMS operator will be happy to assist you should you have some burning "
-"need to use MOP to boot Linux on your Alpha. </para> </footnote>. You can "
-"also enter the IP configuration for network interfaces directly in the SRM "
-"console."
-msgstr ""
-"Tvärtemot Open Firmware som finns på Sparc och PowerPC-maskiner, använder "
-"SRM-konsollen <emphasis>inte</emphasis> RARP för att hämta sin IP-adress, "
-"och därför måste du använda BOOTP för nätverksuppstart av din "
-"Alpha<footnote> <para> Alpha-system kan också nätverksstartas med DECNet MOP "
-"(Maintenance Operations Protocol), men det täcks inte in här. Antagligen kan "
-"din lokala OpenVMS-operatör gladeligen assistera dig om du har ett stort "
-"behov av att använda MOP för att start upp Linux på din Alpha. </para> </"
-"footnote>. Du kan också ange IP-konfigurationen för nätverksgränssnitt "
-"direkt i SRM-konsollen."
-
-#. Tag: para
-#: install-methods.xml:1138
+#: install-methods.xml:1083
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1731,7 +1646,7 @@ msgstr ""
 "tillgängligt i Debian."
 
 #. Tag: para
-#: install-methods.xml:1143
+#: install-methods.xml:1088
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1746,7 +1661,7 @@ msgstr ""
 "SunOS 5.x (även kallad Solaris) och GNU/Linux."
 
 #. Tag: para
-#: install-methods.xml:1151
+#: install-methods.xml:1096
 #, no-c-format
 msgid ""
 "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, you "
@@ -1761,13 +1676,13 @@ msgstr ""
 "<classname>tftpd-hpa</classname>."
 
 #. Tag: title
-#: install-methods.xml:1169
+#: install-methods.xml:1114
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "Konfigurering av RARP-server"
 
 #. Tag: para
-#: install-methods.xml:1170
+#: install-methods.xml:1115
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1787,7 +1702,7 @@ msgstr ""
 "<userinput>/sbin/ifconfig eth0</userinput>."
 
 #. Tag: para
-#: install-methods.xml:1182
+#: install-methods.xml:1127
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, "
@@ -1811,13 +1726,13 @@ msgstr ""
 "eller <userinput>/usr/etc/rarpd -a</userinput> på SunOS 4 (Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:1204
+#: install-methods.xml:1149
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "Konfigurera en BOOTP-server"
 
 #. Tag: para
-#: install-methods.xml:1205
+#: install-methods.xml:1150
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1832,7 +1747,7 @@ msgstr ""
 "classname> respektive <classname>dhcp3-server</classname>."
 
 #. Tag: para
-#: install-methods.xml:1213
+#: install-methods.xml:1158
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1895,7 +1810,7 @@ msgstr ""
 "MAC-adress. </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1246
+#: install-methods.xml:1191
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1919,13 +1834,13 @@ msgstr ""
 "<userinput>/etc/init.d/dhcpd3-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1268
+#: install-methods.xml:1213
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Konfigurering av DHCP-server"
 
 #. Tag: para
-#: install-methods.xml:1269
+#: install-methods.xml:1214
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian;, "
@@ -1939,7 +1854,7 @@ msgstr ""
 "filename>):"
 
 #. Tag: screen
-#: install-methods.xml:1276
+#: install-methods.xml:1221
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1983,7 +1898,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:1278
+#: install-methods.xml:1223
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -2001,7 +1916,7 @@ msgstr ""
 "hämtas via TFTP."
 
 #. Tag: para
-#: install-methods.xml:1288
+#: install-methods.xml:1233
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -2011,13 +1926,13 @@ msgstr ""
 "starta om den med <userinput>/etc/init.d/dhcpd3-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1296
+#: install-methods.xml:1241
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "Aktivera PXE-uppstart i DHCP-konfigurationen"
 
 #. Tag: para
-#: install-methods.xml:1297
+#: install-methods.xml:1242
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -2088,13 +2003,13 @@ msgstr ""
 "kärnavbildning (se <xref linkend=\"tftp-images\"/> nedan)."
 
 #. Tag: title
-#: install-methods.xml:1313
+#: install-methods.xml:1258
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "Aktivering av TFTP-server"
 
 #. Tag: para
-#: install-methods.xml:1314
+#: install-methods.xml:1259
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -2114,7 +2029,7 @@ msgstr ""
 "det korrekt som standard när de installeras."
 
 #. Tag: para
-#: install-methods.xml:1326
+#: install-methods.xml:1271
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -2132,7 +2047,7 @@ msgstr ""
 "justera konfigurationsexemplen i det här avsnittet."
 
 #. Tag: para
-#: install-methods.xml:1336
+#: install-methods.xml:1281
 #, no-c-format
 msgid ""
 "Look in <filename>/etc/inetd.conf</filename> and remember the directory "
@@ -2164,7 +2079,7 @@ msgstr ""
 "HUP <replaceable>inetd-pid</replaceable></userinput>."
 
 #. Tag: para
-#: install-methods.xml:1356
+#: install-methods.xml:1301
 #, no-c-format
 msgid ""
 "If you intend to install Debian on an SGI machine and your TFTP server is a "
@@ -2195,13 +2110,13 @@ msgstr ""
 "Linux TFTP-server använder."
 
 #. Tag: title
-#: install-methods.xml:1378
+#: install-methods.xml:1323
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "Flytta TFTP-avbildningarna till rätt plats"
 
 #. Tag: para
-#: install-methods.xml:1379
+#: install-methods.xml:1324
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -2218,7 +2133,7 @@ msgstr ""
 "finns inga riktiga standarder."
 
 #. Tag: para
-#: install-methods.xml:1388
+#: install-methods.xml:1333
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -2234,13 +2149,13 @@ msgstr ""
 "filename>:"
 
 #. Tag: filename
-#: install-methods.xml:1419
+#: install-methods.xml:1364
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1424
+#: install-methods.xml:1369
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2257,7 +2172,7 @@ msgstr ""
 "uppstart."
 
 #. Tag: para
-#: install-methods.xml:1432
+#: install-methods.xml:1377
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2273,41 +2188,13 @@ msgstr ""
 "efi</filename> till <command>tftpd</command> som filnamnet att starta upp på."
 
 #. Tag: title
-#: install-methods.xml:1444
-#, no-c-format
-msgid "Alpha TFTP Booting"
-msgstr "Uppstart för Alpha via TFTP"
-
-#. Tag: para
-#: install-methods.xml:1445
-#, no-c-format
-msgid ""
-"On Alpha, you must specify the filename (as a relative path to the boot "
-"image directory) using the <userinput>-file</userinput> argument to the SRM "
-"<userinput>boot</userinput> command, or by setting the <userinput>BOOT_FILE</"
-"userinput> environment variable. Alternatively, the filename can be given "
-"via BOOTP (in ISC <command>dhcpd</command>, use the <userinput>filename</"
-"userinput> directive). Unlike Open Firmware, there is <emphasis>no default "
-"filename</emphasis> on SRM, so you <emphasis>must</emphasis> specify a "
-"filename by either one of these methods."
-msgstr ""
-"På Alpha, måste du ange filnamnet (som en relativ sökväg till katalogen för "
-"uppstartsavbildningar) med argumentet <userinput>-file</userinput> till SRM-"
-"kommandot <userinput>boot</userinput>, eller genom att ställa in "
-"miljövariabeln <userinput>BOOT_FILE</userinput>. Alternativ kan filnamnet "
-"anges via BOOTP (i ISC <command>dhcpd</command>, använd direktivet "
-"<userinput>filename</userinput>). Tvärtemot Open Firmware, finns det  "
-"<emphasis>inget standardfilnamn</emphasis> på SRM, så du <emphasis>måste</"
-"emphasis> ange ett filnamn genom en av de här metoderna."
-
-#. Tag: title
-#: install-methods.xml:1460
+#: install-methods.xml:1389
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "Uppstart via TFTP för SPARC"
 
 #. Tag: para
-#: install-methods.xml:1461
+#: install-methods.xml:1390
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -2339,7 +2226,7 @@ msgstr ""
 "underarkitekturens namn."
 
 #. Tag: para
-#: install-methods.xml:1477
+#: install-methods.xml:1406
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -2353,7 +2240,7 @@ msgstr ""
 "avbildningsnamn som efterfrågas."
 
 #. Tag: para
-#: install-methods.xml:1484
+#: install-methods.xml:1413
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -2367,13 +2254,13 @@ msgstr ""
 "i katalogen som TFTP-servern letar i."
 
 #. Tag: title
-#: install-methods.xml:1495
+#: install-methods.xml:1424
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "Uppstart via TFTP för SGI"
 
 #. Tag: para
-#: install-methods.xml:1496
+#: install-methods.xml:1425
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -2387,13 +2274,13 @@ msgstr ""
 "<userinput>filename=</userinput> i <filename>/etc/dhcpd.conf</filename>."
 
 #. Tag: title
-#: install-methods.xml:1604
+#: install-methods.xml:1533
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Automatisk installation"
 
 #. Tag: para
-#: install-methods.xml:1605
+#: install-methods.xml:1534
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2409,13 +2296,13 @@ msgstr ""
 "classname>, och själva Debian Installer."
 
 #. Tag: title
-#: install-methods.xml:1618
+#: install-methods.xml:1547
 #, no-c-format
 msgid "Automatic Installation Using the Debian Installer"
 msgstr "Automatisk installation med Debian Installer"
 
 #. Tag: para
-#: install-methods.xml:1619
+#: install-methods.xml:1548
 #, no-c-format
 msgid ""
 "The Debian Installer supports automating installs via preconfiguration "
@@ -2429,7 +2316,7 @@ msgstr ""
 "ställs under installationsprocessen."
 
 #. Tag: para
-#: install-methods.xml:1626
+#: install-methods.xml:1555
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2438,6 +2325,99 @@ msgstr ""
 "Full dokumentation om förinställning inklusive ett fungerande exempel som du "
 "kan redigera finns i <xref linkend=\"appendix-preseed\"/>."
 
+#~ msgid "Alpha Installation Files"
+#~ msgstr "Installationsfiler för Alpha"
+
+#~ msgid ""
+#~ "If you choose to boot from ARC console firmware using <command>MILO</"
+#~ "command>, you will also need to prepare a disk containing <command>MILO</"
+#~ "command> and <command>LINLOAD.EXE</command> from the provided disk "
+#~ "images. See <xref linkend=\"alpha-firmware\"/> for more information on "
+#~ "Alpha firmware and boot loaders. The floppy images can be found in the "
+#~ "<filename>MILO</filename> directory as "
+#~ "<filename>milo_<replaceable>subarchitecture</replaceable>.bin</filename>."
+#~ msgstr ""
+#~ "Om du väljer att starta från ARC-konsollens firmware med <command>MILO</"
+#~ "command> behöver du att förbereda en disk som innehåller <command>MILO</"
+#~ "command> och <command>LINLOAD.EXE</command> från den angivna "
+#~ "diskavbildningen. Se <xref linkend=\"alpha-firmware\"/> för mer "
+#~ "information om Alpha-firmware och starthanterare. Diskettavbildningar kan "
+#~ "hittas i katalogen <filename>MILO</filename> som "
+#~ "<filename>milo_<replaceable>underarkitektur</replaceable>.bin</filename>."
+
+#~ msgid ""
+#~ "Unfortunately, these <command>MILO</command> images could not be tested "
+#~ "and might not work for all subarchitectures. If you find it doesn't work "
+#~ "for you, try copying the appropriate <command>MILO</command> binary onto "
+#~ "the floppy (<ulink url=\"&disturlftp;main/disks-alpha/current/MILO/\"></"
+#~ "ulink>). Note that those <command>MILO</command>s don't support ext2 "
+#~ "<quote>sparse superblocks</quote>, so you can't use them to load kernels "
+#~ "from newly generated ext2 file systems. As a workaround, you can put your "
+#~ "kernel onto the FAT partition next to the <command>MILO</command>."
+#~ msgstr ""
+#~ "Tyvärr, de här <command>MILO</command>-avbildningarna kunde inte testas "
+#~ "och kanske inte fungerar för alla underarkitekturer. Om du upptäcker att "
+#~ "de inte fungerar för dig, försök att kopiera den lämpliga <command>MILO</"
+#~ "command> binären till disketten (<ulink url=\"&disturlftp;main/disks-"
+#~ "alpha/current/MILO/\"></ulink>). Observera att de här <command>MILO</"
+#~ "command>:arna inte har stöd för <quote>sparse superblocks</quote> i ext2, "
+#~ "så du kan inte använda dem för att läsa in kärnor från nyligen genererade "
+#~ "ext2-filsystem. En lösning är att du kan lägga din kärna på FAT-"
+#~ "partitionen bredvid <command>MILO</command>."
+
+#~ msgid ""
+#~ "<command>MILO</command> binaries are platform-specific. See <xref linkend="
+#~ "\"alpha-cpus\"/> to determine the appropriate <command>MILO</command> "
+#~ "image for your Alpha platform."
+#~ msgstr ""
+#~ "<command>MILO</command>-binärer är plattformsspecifika. Se <xref linkend="
+#~ "\"alpha-cpus\"/> för att fastställa den lämpliga <command>MILO</command>-"
+#~ "avbildningen för din Alpha-plattform."
+
+#~ msgid ""
+#~ "Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM "
+#~ "console will <emphasis>not</emphasis> use RARP to obtain its IP address, "
+#~ "and therefore you must use BOOTP for net booting your Alpha<footnote> "
+#~ "<para> Alpha systems can also be net-booted using the DECNet MOP "
+#~ "(Maintenance Operations Protocol), but this is not covered here. "
+#~ "Presumably, your local OpenVMS operator will be happy to assist you "
+#~ "should you have some burning need to use MOP to boot Linux on your Alpha. "
+#~ "</para> </footnote>. You can also enter the IP configuration for network "
+#~ "interfaces directly in the SRM console."
+#~ msgstr ""
+#~ "Tvärtemot Open Firmware som finns på Sparc och PowerPC-maskiner, använder "
+#~ "SRM-konsollen <emphasis>inte</emphasis> RARP för att hämta sin IP-adress, "
+#~ "och därför måste du använda BOOTP för nätverksuppstart av din "
+#~ "Alpha<footnote> <para> Alpha-system kan också nätverksstartas med DECNet "
+#~ "MOP (Maintenance Operations Protocol), men det täcks inte in här. "
+#~ "Antagligen kan din lokala OpenVMS-operatör gladeligen assistera dig om du "
+#~ "har ett stort behov av att använda MOP för att start upp Linux på din "
+#~ "Alpha. </para> </footnote>. Du kan också ange IP-konfigurationen för "
+#~ "nätverksgränssnitt direkt i SRM-konsollen."
+
+#~ msgid "Alpha TFTP Booting"
+#~ msgstr "Uppstart för Alpha via TFTP"
+
+#~ msgid ""
+#~ "On Alpha, you must specify the filename (as a relative path to the boot "
+#~ "image directory) using the <userinput>-file</userinput> argument to the "
+#~ "SRM <userinput>boot</userinput> command, or by setting the "
+#~ "<userinput>BOOT_FILE</userinput> environment variable. Alternatively, the "
+#~ "filename can be given via BOOTP (in ISC <command>dhcpd</command>, use the "
+#~ "<userinput>filename</userinput> directive). Unlike Open Firmware, there "
+#~ "is <emphasis>no default filename</emphasis> on SRM, so you "
+#~ "<emphasis>must</emphasis> specify a filename by either one of these "
+#~ "methods."
+#~ msgstr ""
+#~ "På Alpha, måste du ange filnamnet (som en relativ sökväg till katalogen "
+#~ "för uppstartsavbildningar) med argumentet <userinput>-file</userinput> "
+#~ "till SRM-kommandot <userinput>boot</userinput>, eller genom att ställa in "
+#~ "miljövariabeln <userinput>BOOT_FILE</userinput>. Alternativ kan filnamnet "
+#~ "anges via BOOTP (i ISC <command>dhcpd</command>, använd direktivet "
+#~ "<userinput>filename</userinput>). Tvärtemot Open Firmware, finns det  "
+#~ "<emphasis>inget standardfilnamn</emphasis> på SRM, så du <emphasis>måste</"
+#~ "emphasis> ange ett filnamn genom en av de här metoderna."
+
 #~ msgid "Choosing a Kernel"
 #~ msgstr "Välja en kärna"