Refresh po and pot files, after changings in en

4 files changed, 274 insertions, 199 deletions

diff --git a/po/nl/hardware.po b/po/nl/hardware.po
index 5d42c2441..e1276f4e4 100644
--- a/po/nl/hardware.po
+++ b/po/nl/hardware.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_hardware\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2017-07-12 09:14+0000\n"
+"POT-Creation-Date: 2019-08-11 15:17+0000\n"
 "PO-Revision-Date: 2017-10-27 20:19+0200\n"
 "Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
 "Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
@@ -117,52 +117,52 @@ msgstr "Variant"
 #. Tag: entry
 #: hardware.xml:60
 #, no-c-format
+msgid "AMD64 &amp; Intel 64"
+msgstr "AMD64 &amp; Intel 64"
+
+#. Tag: entry
+#: hardware.xml:61
+#, no-c-format
+msgid "amd64"
+msgstr "amd64"
+
+#. Tag: entry
+#: hardware.xml:67
+#, no-c-format
 msgid "Intel x86-based"
 msgstr "Gebaseerd op Intel x86"
 
 #. Tag: entry
-#: hardware.xml:61
+#: hardware.xml:68
 #, no-c-format
 msgid "i386"
 msgstr "i386"
 
 #. Tag: entry
-#: hardware.xml:62
+#: hardware.xml:69
 #, no-c-format
 msgid "default x86 machines"
 msgstr "standaard x86-systemen"
 
 #. Tag: entry
-#: hardware.xml:63
+#: hardware.xml:70
 #, no-c-format
 msgid "default"
 msgstr "standaard"
 
 #. Tag: entry
-#: hardware.xml:65
+#: hardware.xml:72
 #, no-c-format
 msgid "Xen PV domains only"
 msgstr "enkel Xen PV domeinen"
 
 #. Tag: entry
-#: hardware.xml:66
+#: hardware.xml:73
 #, no-c-format
 msgid "<entry>xen</entry>"
 msgstr "<entry>xen</entry>"
 
 #. Tag: entry
-#: hardware.xml:70
-#, no-c-format
-msgid "AMD64 &amp; Intel 64"
-msgstr "AMD64 &amp; Intel 64"
-
-#. Tag: entry
-#: hardware.xml:71
-#, no-c-format
-msgid "amd64"
-msgstr "amd64"
-
-#. Tag: entry
 #: hardware.xml:77
 #, no-c-format
 msgid "<entry>ARM</entry>"
diff --git a/po/nl/partitioning.po b/po/nl/partitioning.po
index 11a88b5b6..867ea2715 100644
--- a/po/nl/partitioning.po
+++ b/po/nl/partitioning.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_partitioning\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2015-04-15 20:29+0000\n"
+"POT-Creation-Date: 2019-08-11 15:17+0000\n"
 "PO-Revision-Date: 2017-04-06 12:10+0200\n"
 "Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
 "Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
@@ -516,14 +516,18 @@ msgstr "Aanbevolen schijfindelingsschema"
 
 #. Tag: para
 #: partitioning.xml:236
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "For new users, personal &debian; boxes, home systems, and other single-"
+#| "user setups, a single <filename>/</filename> partition (plus swap) is "
+#| "probably the easiest, simplest way to go. However, if your partition is "
+#| "larger than around 6GB, choose ext3 as your partition type. Ext2 "
+#| "partitions need periodic file system integrity checking, and this can "
+#| "cause delays during booting when the partition is large."
 msgid ""
 "For new users, personal &debian; boxes, home systems, and other single-user "
 "setups, a single <filename>/</filename> partition (plus swap) is probably "
-"the easiest, simplest way to go. However, if your partition is larger than "
-"around 6GB, choose ext3 as your partition type. Ext2 partitions need "
-"periodic file system integrity checking, and this can cause delays during "
-"booting when the partition is large."
+"the easiest, simplest way to go. The recommended partition type is ext4."
 msgstr ""
 "Voor een nieuwe gebruiker, een persoonlijke &debian; computer, een "
 "thuiscomputer en andere situaties waarin de computer hoofdzakelijk slechts "
@@ -535,7 +539,7 @@ msgstr ""
 "zorgen als de partitie redelijk groot is."
 
 #. Tag: para
-#: partitioning.xml:245
+#: partitioning.xml:243
 #, no-c-format
 msgid ""
 "For multi-user systems or systems with lots of disk space, it's best to put "
@@ -549,18 +553,26 @@ msgstr ""
 "van de <filename>/</filename>-partitie."
 
 #. Tag: para
-#: partitioning.xml:253
-#, no-c-format
+#: partitioning.xml:251
+#, fuzzy, no-c-format
+#| msgid ""
+#| "You might need a separate <filename>/usr/local</filename> partition if "
+#| "you plan to install many programs that are not part of the &debian; "
+#| "distribution. If your machine will be a mail server, you might need to "
+#| "make <filename>/var/mail</filename> a separate partition. Often, putting "
+#| "<filename>/tmp</filename> on its own partition, for instance "
+#| "20&ndash;50MB, is a good idea. If you are setting up a server with lots "
+#| "of user accounts, it's generally good to have a separate, large "
+#| "<filename>/home</filename> partition. In general, the partitioning "
+#| "situation varies from computer to computer depending on its uses."
 msgid ""
 "You might need a separate <filename>/usr/local</filename> partition if you "
 "plan to install many programs that are not part of the &debian; "
 "distribution. If your machine will be a mail server, you might need to make "
-"<filename>/var/mail</filename> a separate partition. Often, putting "
-"<filename>/tmp</filename> on its own partition, for instance 20&ndash;50MB, "
-"is a good idea. If you are setting up a server with lots of user accounts, "
-"it's generally good to have a separate, large <filename>/home</filename> "
-"partition. In general, the partitioning situation varies from computer to "
-"computer depending on its uses."
+"<filename>/var/mail</filename> a separate partition. If you are setting up a "
+"server with lots of user accounts, it's generally good to have a separate, "
+"large <filename>/home</filename> partition. In general, the partitioning "
+"situation varies from computer to computer depending on its uses."
 msgstr ""
 "Misschien heeft u een aparte <filename>/usr/local</filename>-partitie nodig "
 "als u veel programma's denkt te installeren die geen deel uitmaken van de "
@@ -574,7 +586,7 @@ msgstr ""
 "per computer naargelang het gebruik dat er van gemaakt wordt."
 
 #. Tag: para
-#: partitioning.xml:265
+#: partitioning.xml:262
 #, no-c-format
 msgid ""
 "For very complex systems, you should see the <ulink url=\"&url-multidisk-"
@@ -587,15 +599,20 @@ msgstr ""
 "die servers beheren."
 
 #. Tag: para
-#: partitioning.xml:272
-#, no-c-format
+#: partitioning.xml:269
+#, fuzzy, no-c-format
+#| msgid ""
+#| "With respect to the issue of swap partition size, there are many views. "
+#| "One rule of thumb which works well is to use as much swap as you have "
+#| "system memory. It also shouldn't be smaller than 16MB, in most cases. Of "
+#| "course, there are exceptions to these rules. If you are trying to solve "
+#| "10000 simultaneous equations on a machine with 256MB of memory, you may "
+#| "need a gigabyte (or more) of swap."
 msgid ""
 "With respect to the issue of swap partition size, there are many views. One "
 "rule of thumb which works well is to use as much swap as you have system "
-"memory. It also shouldn't be smaller than 16MB, in most cases. Of course, "
-"there are exceptions to these rules. If you are trying to solve 10000 "
-"simultaneous equations on a machine with 256MB of memory, you may need a "
-"gigabyte (or more) of swap."
+"memory. It also shouldn't be smaller than 512MB, in most cases. Of course, "
+"there are exceptions to these rules."
 msgstr ""
 "Er bestaan verschillende opvattingen over de grootte van de "
 "wisselgeheugenpartitie (swap). Een goede vuistregel is om evenveel swap te "
@@ -606,33 +623,19 @@ msgstr ""
 "gaat uitvoeren, heeft u misschien wel een gigabyte (of meer) swap nodig."
 
 #. Tag: para
-#: partitioning.xml:281
-#, no-c-format
+#: partitioning.xml:276
+#, fuzzy, no-c-format
+#| msgid ""
+#| "As an example, an older home machine might have 32MB of RAM and a 1.7GB "
+#| "IDE drive on <filename>/dev/sda</filename>. There might be a 500MB "
+#| "partition for another operating system on <filename>/dev/sda1</filename>, "
+#| "a 32MB swap partition on <filename>/dev/sda3</filename> and about 1.2GB "
+#| "on <filename>/dev/sda2</filename> as the Linux partition."
 msgid ""
-"On some 32-bit architectures (m68k and PowerPC), the maximum size of a swap "
-"partition is 2GB. That should be enough for nearly any installation. "
-"However, if your swap requirements are this high, you should probably try to "
-"spread the swap across different disks (also called <quote>spindles</quote>) "
-"and, if possible, different SCSI or IDE channels. The kernel will balance "
-"swap usage between multiple swap partitions, giving better performance."
-msgstr ""
-"Op sommige 32-bits architecturen (m68k en PowerPC) is de maximale grootte "
-"van een swap-partitie 2GB. Voor bijna elke installatie zal dit volstaan. "
-"Indien u echter zoveel wisselgeheugen nodig heeft, doet u er wellicht goed "
-"aan om het wisselgeheugen te spreiden over verschillende schijven (ook wel "
-"<quote>spindles</quote> of spoelen genoemd) en zo mogelijk ook over "
-"verschillende SCSI- of IDE-kanalen. De kernel zal het wisselgeheugengebruik "
-"evenredig verdelen over de verschillende swap-partities, wat tot betere "
-"prestaties leidt."
-
-#. Tag: para
-#: partitioning.xml:291
-#, no-c-format
-msgid ""
-"As an example, an older home machine might have 32MB of RAM and a 1.7GB IDE "
-"drive on <filename>/dev/sda</filename>. There might be a 500MB partition for "
-"another operating system on <filename>/dev/sda1</filename>, a 32MB swap "
-"partition on <filename>/dev/sda3</filename> and about 1.2GB on <filename>/"
+"As an example, an older home machine might have 512MB of RAM and a 20GB SATA "
+"drive on <filename>/dev/sda</filename>. There might be a 8GB partition for "
+"another operating system on <filename>/dev/sda1</filename>, a 512MB swap "
+"partition on <filename>/dev/sda3</filename> and about 11.4GB on <filename>/"
 "dev/sda2</filename> as the Linux partition."
 msgstr ""
 "Een mogelijk voorbeeld is een oudere thuiscomputer met 32MB RAM-geheugen en "
@@ -643,7 +646,7 @@ msgstr ""
 "dev/sda2</filename>."
 
 #. Tag: para
-#: partitioning.xml:300
+#: partitioning.xml:285
 #, no-c-format
 msgid ""
 "For an idea of the space taken by tasks you might be interested in adding "
@@ -655,13 +658,13 @@ msgstr ""
 "<xref linkend=\"tasksel-size-list\"/> raadplegen."
 
 #. Tag: title
-#: partitioning.xml:316
+#: partitioning.xml:301
 #, no-c-format
 msgid "Device Names in Linux"
 msgstr "De benaming van apparaten in Linux"
 
 #. Tag: para
-#: partitioning.xml:317
+#: partitioning.xml:302
 #, no-c-format
 msgid ""
 "Linux disks and partition names may be different from other operating "
@@ -674,19 +677,19 @@ msgstr ""
 "over het naamgevingsschema:"
 
 #. Tag: para
-#: partitioning.xml:325
+#: partitioning.xml:310
 #, no-c-format
 msgid "The first floppy drive is named <filename>/dev/fd0</filename>."
 msgstr "Het eerste diskettestation heet <filename>/dev/fd0</filename>."
 
 #. Tag: para
-#: partitioning.xml:330
+#: partitioning.xml:315
 #, no-c-format
 msgid "The second floppy drive is named <filename>/dev/fd1</filename>."
 msgstr "Het tweede diskettestation heet <filename>/dev/fd1</filename>."
 
 #. Tag: para
-#: partitioning.xml:335
+#: partitioning.xml:320
 #, no-c-format
 msgid "The first hard disk detected is named <filename>/dev/sda</filename>."
 msgstr ""
@@ -694,7 +697,7 @@ msgstr ""
 "filename>."
 
 #. Tag: para
-#: partitioning.xml:340
+#: partitioning.xml:325
 #, no-c-format
 msgid ""
 "The second hard disk detected is named <filename>/dev/sdb</filename>, and so "
@@ -704,7 +707,7 @@ msgstr ""
 "filename>, enzovoort."
 
 #. Tag: para
-#: partitioning.xml:346
+#: partitioning.xml:331
 #, no-c-format
 msgid ""
 "The first SCSI CD-ROM is named <filename>/dev/scd0</filename>, also known as "
@@ -714,13 +717,13 @@ msgstr ""
 "gekend als <filename>/dev/sr0</filename>."
 
 #. Tag: para
-#: partitioning.xml:355
+#: partitioning.xml:340
 #, no-c-format
 msgid "The first DASD device is named <filename>/dev/dasda</filename>."
 msgstr "Het eerste DASD-apparaat heet <filename>/dev/dasda</filename>."
 
 #. Tag: para
-#: partitioning.xml:361
+#: partitioning.xml:346
 #, no-c-format
 msgid ""
 "The second DASD device is named <filename>/dev/dasdb</filename>, and so on."
@@ -728,7 +731,7 @@ msgstr ""
 "Het tweede DASD-apparaat heet <filename>/dev/dasdb</filename>, enzovoort."
 
 #. Tag: para
-#: partitioning.xml:369
+#: partitioning.xml:354
 #, no-c-format
 msgid ""
 "The partitions on each disk are represented by appending a decimal number to "
@@ -742,7 +745,7 @@ msgstr ""
 "eerse SCSI-schijf op uw systeem."
 
 #. Tag: para
-#: partitioning.xml:376
+#: partitioning.xml:361
 #, no-c-format
 msgid ""
 "Here is a real-life example. Let's assume you have a system with 2 SCSI "
@@ -763,7 +766,7 @@ msgstr ""
 "haar partities."
 
 #. Tag: para
-#: partitioning.xml:387
+#: partitioning.xml:372
 #, no-c-format
 msgid ""
 "Note that if you have two SCSI host bus adapters (i.e., controllers), the "
@@ -778,7 +781,7 @@ msgstr ""
 "de grootte van de schijven."
 
 #. Tag: para
-#: partitioning.xml:394
+#: partitioning.xml:379
 #, no-c-format
 msgid ""
 "Linux represents the primary partitions as the drive name, plus the numbers "
@@ -797,7 +800,7 @@ msgstr ""
 "partities bevat, op zich niet bruikbaar is."
 
 #. Tag: para
-#: partitioning.xml:404
+#: partitioning.xml:389
 #, no-c-format
 msgid ""
 "Sun disk partitions allow for 8 separate partitions (or slices). The third "
@@ -812,7 +815,7 @@ msgstr ""
 "opstartlader gebruikt (ofwel SILO, ofwel die van Sun)."
 
 #. Tag: para
-#: partitioning.xml:411
+#: partitioning.xml:396
 #, no-c-format
 msgid ""
 "The partitions on each disk are represented by appending a decimal number to "
@@ -826,13 +829,13 @@ msgstr ""
 "het eerste DASD-apparaat op uw systeem."
 
 #. Tag: title
-#: partitioning.xml:426
+#: partitioning.xml:411
 #, no-c-format
 msgid "&debian; Partitioning Programs"
 msgstr "&debian; schijfindelingsprogramma's"
 
 #. Tag: para
-#: partitioning.xml:427
+#: partitioning.xml:412
 #, no-c-format
 msgid ""
 "Several varieties of partitioning programs have been adapted by &debian; "
@@ -846,7 +849,7 @@ msgstr ""
 "programma's die voor uw architectuur van toepassing zijn."
 
 #. Tag: para
-#: partitioning.xml:440
+#: partitioning.xml:425
 #, no-c-format
 msgid ""
 "Recommended partitioning tool in &debian;. This Swiss army knife can also "
@@ -860,13 +863,13 @@ msgstr ""
 "taalgebruik)</phrase> en ze toe te wijzen aan aankoppelpunten."
 
 #. Tag: para
-#: partitioning.xml:452
+#: partitioning.xml:437
 #, no-c-format
 msgid "The original Linux disk partitioner, good for gurus."
 msgstr "Het originele Linux schijfindelingsprogramma; goed voor goeroes."
 
 #. Tag: para
-#: partitioning.xml:456
+#: partitioning.xml:441
 #, no-c-format
 msgid ""
 "Be careful if you have existing FreeBSD partitions on your machine. The "
@@ -882,7 +885,7 @@ msgstr ""
 "linux-freebsd;\">Linux+FreeBSD HOWTO</ulink>."
 
 #. Tag: para
-#: partitioning.xml:469
+#: partitioning.xml:454
 #, no-c-format
 msgid "A simple-to-use, full-screen disk partitioner for the rest of us."
 msgstr ""
@@ -890,7 +893,7 @@ msgstr ""
 "voor de rest onder ons."
 
 #. Tag: para
-#: partitioning.xml:473
+#: partitioning.xml:458
 #, no-c-format
 msgid ""
 "Note that <command>cfdisk</command> doesn't understand FreeBSD partitions at "
@@ -901,25 +904,25 @@ msgstr ""
 "verschillend zijn."
 
 #. Tag: para
-#: partitioning.xml:483
+#: partitioning.xml:468
 #, no-c-format
 msgid "Atari-aware version of <command>fdisk</command>."
 msgstr "Een voor Atari geschikte versie van <command>fdisk</command>."
 
 #. Tag: para
-#: partitioning.xml:492
+#: partitioning.xml:477
 #, no-c-format
 msgid "Amiga-aware version of <command>fdisk</command>."
 msgstr "Een voor Amiga geschikte versie van <command>fdisk</command>."
 
 #. Tag: para
-#: partitioning.xml:501
+#: partitioning.xml:486
 #, no-c-format
 msgid "Mac-aware version of <command>fdisk</command>."
 msgstr "Een voor Mac geschikte versie van <command>fdisk</command>."
 
 #. Tag: para
-#: partitioning.xml:510
+#: partitioning.xml:495
 #, no-c-format
 msgid ""
 "PowerMac-aware version of <command>fdisk</command>, also used by BVM and "
@@ -929,7 +932,7 @@ msgstr ""
 "gebruikt wordt voor VMEbus-systemen van BVM en Motorola."
 
 #. Tag: para
-#: partitioning.xml:520
+#: partitioning.xml:505
 #, no-c-format
 msgid ""
 "&arch-title; version of <command>fdisk</command>; Please read the fdasd "
@@ -944,7 +947,7 @@ msgstr ""
 "installatiecommando's) te lezen voor meer informatie."
 
 #. Tag: para
-#: partitioning.xml:531
+#: partitioning.xml:516
 #, no-c-format
 msgid ""
 "One of these programs will be run by default when you select "
@@ -958,7 +961,7 @@ msgstr ""
 "commandoregel op VT2, maar dit wordt niet aangeraden."
 
 #. Tag: para
-#: partitioning.xml:538
+#: partitioning.xml:523
 #, no-c-format
 msgid "Remember to mark your boot partition as <quote>Bootable</quote>."
 msgstr ""
@@ -966,7 +969,7 @@ msgstr ""
 "(opstartbaar)."
 
 #. Tag: para
-#: partitioning.xml:541
+#: partitioning.xml:526
 #, no-c-format
 msgid ""
 "One key point when partitioning for Mac type disks is that the swap "
@@ -986,14 +989,14 @@ msgstr ""
 "gebruiken."
 
 #. Tag: title
-#: partitioning.xml:557 partitioning.xml:581 partitioning.xml:677
-#: partitioning.xml:791 partitioning.xml:868
+#: partitioning.xml:542 partitioning.xml:566 partitioning.xml:662
+#: partitioning.xml:776 partitioning.xml:853
 #, no-c-format
 msgid "Partitioning for &arch-title;"
 msgstr "Schijven indelen voor &arch-title;"
 
 #. Tag: para
-#: partitioning.xml:558
+#: partitioning.xml:543
 #, no-c-format
 msgid ""
 "PALO, the HPPA boot loader, requires a partition of type <quote>F0</quote> "
@@ -1024,7 +1027,7 @@ msgstr ""
 "gebruiken; 25&ndash;50MB volstaat meestal."
 
 #. Tag: para
-#: partitioning.xml:582
+#: partitioning.xml:567
 #, no-c-format
 msgid ""
 "If you have an existing other operating system such as DOS or Windows and "
@@ -1046,7 +1049,7 @@ msgstr ""
 "de grootte ervan wijzigen."
 
 #. Tag: para
-#: partitioning.xml:592
+#: partitioning.xml:577
 #, no-c-format
 msgid ""
 "The PC BIOS generally adds additional constraints for disk partitioning. "
@@ -1067,7 +1070,7 @@ msgstr ""
 "voorkomende situaties kunt aanpakken."
 
 #. Tag: para
-#: partitioning.xml:602
+#: partitioning.xml:587
 #, no-c-format
 msgid ""
 "<quote>Primary</quote> partitions are the original partitioning scheme for "
@@ -1088,7 +1091,7 @@ msgstr ""
 "Op een schijf kunt u echter slecht één uitgebreide partitie hebben."
 
 #. Tag: para
-#: partitioning.xml:613
+#: partitioning.xml:598
 #, no-c-format
 msgid ""
 "Linux limits the partitions per drive to 255 partitions for SCSI disks (3 "
@@ -1107,7 +1110,7 @@ msgstr ""
 "partities."
 
 #. Tag: para
-#: partitioning.xml:623
+#: partitioning.xml:608
 #, no-c-format
 msgid ""
 "If you have a large IDE disk, and are using neither LBA addressing, nor "
@@ -1124,7 +1127,7 @@ msgstr ""
 "megabytes) staan."
 
 #. Tag: para
-#: partitioning.xml:631
+#: partitioning.xml:616
 #, no-c-format
 msgid ""
 "This restriction doesn't apply if you have a BIOS newer than around "
@@ -1153,7 +1156,7 @@ msgstr ""
 "immers geen gebruik van het BIOS om de harde schijf te benaderen."
 
 #. Tag: para
-#: partitioning.xml:645
+#: partitioning.xml:630
 #, no-c-format
 msgid ""
 "If you have a large disk, you might have to use cylinder translation "
@@ -1177,7 +1180,7 @@ msgstr ""
 "<emphasis>omgezette</emphasis> representatie van de 1024e cylinder bevinden."
 
 #. Tag: para
-#: partitioning.xml:657
+#: partitioning.xml:642
 #, no-c-format
 msgid ""
 "The recommended way of accomplishing this is to create a small "
@@ -1202,7 +1205,7 @@ msgstr ""
 "ondersteunt of niet."
 
 #. Tag: para
-#: partitioning.xml:678
+#: partitioning.xml:663
 #, no-c-format
 msgid ""
 "The <command>partman</command> disk partitioner is the default partitioning "
@@ -1219,13 +1222,13 @@ msgstr ""
 "om op de schijf de indeling uit te voeren."
 
 #. Tag: title
-#: partitioning.xml:690
+#: partitioning.xml:675
 #, no-c-format
 msgid "EFI Recognized Formats"
 msgstr "Door EFI herkende indelingen"
 
 #. Tag: para
-#: partitioning.xml:691
+#: partitioning.xml:676
 #, no-c-format
 msgid ""
 "The IA-64 EFI firmware supports two partition table (or disk label) formats, "
@@ -1244,7 +1247,7 @@ msgstr ""
 "zowel GPT- als MS-DOS-tabellen."
 
 #. Tag: para
-#: partitioning.xml:703
+#: partitioning.xml:688
 #, no-c-format
 msgid ""
 "The automatic partitioning recipes for <command>partman</command> allocate "
@@ -1261,7 +1264,7 @@ msgstr ""
 "wisselgeheugen) instelt."
 
 #. Tag: para
-#: partitioning.xml:711
+#: partitioning.xml:696
 #, no-c-format
 msgid ""
 "The <command>partman</command> partitioner will handle most disk layouts. "
@@ -1315,13 +1318,13 @@ msgstr ""
 "onderzoekt op slechte blokken."
 
 #. Tag: title
-#: partitioning.xml:736
+#: partitioning.xml:721
 #, no-c-format
 msgid "Boot Loader Partition Requirements"
 msgstr "Schijfindelingsvereisten van de opstartlader"
 
 #. Tag: para
-#: partitioning.xml:737
+#: partitioning.xml:722
 #, no-c-format
 msgid ""
 "ELILO, the IA-64 boot loader, requires a partition containing a FAT file "
@@ -1339,7 +1342,7 @@ msgstr ""
 "kunnen gebruiken is een grootte van 128MB wellicht beter."
 
 #. Tag: para
-#: partitioning.xml:746
+#: partitioning.xml:731
 #, no-c-format
 msgid ""
 "The EFI Boot Manager and the EFI Shell fully support the GPT table so the "
@@ -1367,7 +1370,7 @@ msgstr ""
 "krimpen, zodat voldoende ruimte vrij komt om de EFI-partitie toe te voegen."
 
 #. Tag: para
-#: partitioning.xml:761
+#: partitioning.xml:746
 #, no-c-format
 msgid ""
 "It is strongly recommended that you allocate the EFI boot partition on the "
@@ -1377,13 +1380,13 @@ msgstr ""
 "plaatsen als het <emphasis>root</emphasis>-bestandssysteem."
 
 #. Tag: title
-#: partitioning.xml:769
+#: partitioning.xml:754
 #, no-c-format
 msgid "EFI Diagnostic Partitions"
 msgstr "Diagnostische EFI-partities"
 
 #. Tag: para
-#: partitioning.xml:770
+#: partitioning.xml:755
 #, no-c-format
 msgid ""
 "The EFI firmware is significantly more sophisticated than the usual BIOS "
@@ -1407,7 +1410,7 @@ msgstr ""
 "boot-partitie opzet."
 
 #. Tag: para
-#: partitioning.xml:792
+#: partitioning.xml:777
 #, no-c-format
 msgid ""
 "SGI machines require an SGI disk label in order to make the system bootable "
@@ -1427,13 +1430,13 @@ msgstr ""
 "bij sector 0."
 
 #. Tag: title
-#: partitioning.xml:809
+#: partitioning.xml:794
 #, no-c-format
 msgid "Partitioning Newer PowerMacs"
 msgstr "De schijfindeling op recentere PowerMacs"
 
 #. Tag: para
-#: partitioning.xml:810
+#: partitioning.xml:795
 #, no-c-format
 msgid ""
 "If you are installing onto a NewWorld PowerMac you must create a special "
@@ -1459,7 +1462,7 @@ msgstr ""
 "<userinput>b</userinput> te gebruiken."
 
 #. Tag: para
-#: partitioning.xml:823
+#: partitioning.xml:808
 #, no-c-format
 msgid ""
 "The special partition type Apple_Bootstrap is required to prevent MacOS from "
@@ -1472,7 +1475,7 @@ msgstr ""
 "zorgen dat OpenFirmware ze kan gebruiken om automatisch op te starten."
 
 #. Tag: para
-#: partitioning.xml:830
+#: partitioning.xml:815
 #, no-c-format
 msgid ""
 "Note that the bootstrap partition is only meant to hold 3 very small files: "
@@ -1492,7 +1495,7 @@ msgstr ""
 "bewerken."
 
 #. Tag: para
-#: partitioning.xml:840
+#: partitioning.xml:825
 #, no-c-format
 msgid ""
 "In order for OpenFirmware to automatically boot &debian-gnu; the bootstrap "
@@ -1515,7 +1518,7 @@ msgstr ""
 "die van belang is en niet de volgorde van de fysieke adressen."
 
 #. Tag: para
-#: partitioning.xml:852
+#: partitioning.xml:837
 #, no-c-format
 msgid ""
 "Apple disks normally have several small driver partitions. If you intend to "
@@ -1533,7 +1536,7 @@ msgstr ""
 "stuurprogrammaparities bevatten."
 
 #. Tag: para
-#: partitioning.xml:869
+#: partitioning.xml:854
 #, no-c-format
 msgid ""
 "Make sure you create a <quote>Sun disk label</quote> on your boot disk. This "
@@ -1548,7 +1551,7 @@ msgstr ""
 "schijflabels te creëren."
 
 #. Tag: para
-#: partitioning.xml:877
+#: partitioning.xml:862
 #, no-c-format
 msgid ""
 "Furthermore, on &arch-title; disks, make sure your first partition on your "
@@ -1571,7 +1574,7 @@ msgstr ""
 "ongemoeid."
 
 #. Tag: para
-#: partitioning.xml:888
+#: partitioning.xml:873
 #, no-c-format
 msgid ""
 "It is also advised that the third partition should be of type <quote>Whole "
@@ -1584,3 +1587,21 @@ msgstr ""
 "volledige schijf omvat (van de eerste cylinder tot de laatste). Dit is "
 "gewoon een conventie van Sun schijflabels en het helpt de opstartlader "
 "<command>SILO</command> zijn weg te vinden."
+
+#~ msgid ""
+#~ "On some 32-bit architectures (m68k and PowerPC), the maximum size of a "
+#~ "swap partition is 2GB. That should be enough for nearly any installation. "
+#~ "However, if your swap requirements are this high, you should probably try "
+#~ "to spread the swap across different disks (also called <quote>spindles</"
+#~ "quote>) and, if possible, different SCSI or IDE channels. The kernel will "
+#~ "balance swap usage between multiple swap partitions, giving better "
+#~ "performance."
+#~ msgstr ""
+#~ "Op sommige 32-bits architecturen (m68k en PowerPC) is de maximale grootte "
+#~ "van een swap-partitie 2GB. Voor bijna elke installatie zal dit volstaan. "
+#~ "Indien u echter zoveel wisselgeheugen nodig heeft, doet u er wellicht "
+#~ "goed aan om het wisselgeheugen te spreiden over verschillende schijven "
+#~ "(ook wel <quote>spindles</quote> of spoelen genoemd) en zo mogelijk ook "
+#~ "over verschillende SCSI- of IDE-kanalen. De kernel zal het "
+#~ "wisselgeheugengebruik evenredig verdelen over de verschillende swap-"
+#~ "partities, wat tot betere prestaties leidt."
diff --git a/po/nl/post-install.po b/po/nl/post-install.po
index 99a71eecd..be267d286 100644
--- a/po/nl/post-install.po
+++ b/po/nl/post-install.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_post-install\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2018-08-31 23:21+0000\n"
+"POT-Creation-Date: 2019-08-11 15:17+0000\n"
 "PO-Revision-Date: 2018-09-12 23:32+0200\n"
 "Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
 "Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
@@ -480,10 +480,19 @@ msgstr "Een standaard e-mailconfiguratie"
 
 #. Tag: para
 #: post-install.xml:295
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Even if you are planning to use a graphical mail program, it is important "
+#| "that a traditional MTA/MDA is also installed and correctly set up on your "
+#| "&debian-gnu; system. Reason is that various utilities running on the "
+#| "system<footnote> <para> Examples are: <command>cron</command>, "
+#| "<command>quota</command>, <command>logcheck</command>, <command>aide</"
+#| "command>, &hellip; </para> </footnote> can send important notices by e-"
+#| "mail to inform the system administrator of (potential) problems or "
+#| "changes."
 msgid ""
-"Even if you are planning to use a graphical mail program, it is important "
-"that a traditional MTA/MDA is also installed and correctly set up on your "
+"Even if you are planning to use a graphical mail program, it would be "
+"useful, to have a traditional MTA/MDA installed and correctly set up on your "
 "&debian-gnu; system. Reason is that various utilities running on the "
 "system<footnote> <para> Examples are: <command>cron</command>, "
 "<command>quota</command>, <command>logcheck</command>, <command>aide</"
@@ -502,19 +511,31 @@ msgstr ""
 
 #. Tag: para
 #: post-install.xml:310
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "For this reason the packages <classname>exim4</classname> and "
+#| "<classname>mutt</classname> will be installed by default (provided you "
+#| "did not unselect the <quote>standard</quote> task during the "
+#| "installation). <classname>exim4</classname> is a combination MTA/MDA that "
+#| "is relatively small but very flexible. By default it will be configured "
+#| "to only handle e-mail local to the system itself and e-mails addressed to "
+#| "the system administrator (root account) will be delivered to the regular "
+#| "user account created during the installation<footnote> <para> The "
+#| "forwarding of mail for root to the regular user account is configured in "
+#| "<filename>/etc/aliases</filename>. If no regular user account was "
+#| "created, the mail will of course be delivered to the root account itself. "
+#| "</para> </footnote>."
 msgid ""
-"For this reason the packages <classname>exim4</classname> and "
-"<classname>mutt</classname> will be installed by default (provided you did "
-"not unselect the <quote>standard</quote> task during the installation). "
-"<classname>exim4</classname> is a combination MTA/MDA that is relatively "
-"small but very flexible. By default it will be configured to only handle e-"
-"mail local to the system itself and e-mails addressed to the system "
-"administrator (root account) will be delivered to the regular user account "
-"created during the installation<footnote> <para> The forwarding of mail for "
-"root to the regular user account is configured in <filename>/etc/aliases</"
-"filename>. If no regular user account was created, the mail will of course "
-"be delivered to the root account itself. </para> </footnote>."
+"For this you can install <classname>exim4</classname> and <classname>mutt</"
+"classname> with <command>apt install exim4 mutt</command>. <classname>exim4</"
+"classname> is a combination MTA/MDA that is relatively small but very "
+"flexible. By default it will be configured to only handle e-mail local to "
+"the system itself and e-mails addressed to the system administrator (root "
+"account) will be delivered to the regular user account created during the "
+"installation<footnote> <para> The forwarding of mail for root to the regular "
+"user account is configured in <filename>/etc/aliases</filename>. If no "
+"regular user account was created, the mail will of course be delivered to "
+"the root account itself. </para> </footnote>."
 msgstr ""
 "Om die reden worden de pakketten <classname>exim4</classname> en "
 "<classname>mutt</classname> standaard op het systeem geïnstalleerd (in de "
@@ -531,7 +552,7 @@ msgstr ""
 "afgeleverd worden bij de root-account zelf. </para> </footnote>."
 
 #. Tag: para
-#: post-install.xml:329
+#: post-install.xml:328
 #, no-c-format
 msgid ""
 "When system e-mails are delivered they are added to a file in <filename>/var/"
@@ -544,13 +565,13 @@ msgstr ""
 "<command>mutt</command> gelezen worden."
 
 #. Tag: title
-#: post-install.xml:339
+#: post-install.xml:338
 #, no-c-format
 msgid "Sending E-Mails Outside The System"
 msgstr "E-mails versturen buiten het systeem"
 
 #. Tag: para
-#: post-install.xml:340
+#: post-install.xml:339
 #, no-c-format
 msgid ""
 "As mentioned earlier, the installed &debian; system is only set up to handle "
@@ -563,7 +584,7 @@ msgstr ""
 "andere systemen."
 
 #. Tag: para
-#: post-install.xml:346
+#: post-install.xml:345
 #, no-c-format
 msgid ""
 "If you would like <classname>exim4</classname> to handle external e-mail, "
@@ -576,7 +597,7 @@ msgstr ""
 "mail wel degelijk correct verstuurd en ontvangen kan worden."
 
 #. Tag: para
-#: post-install.xml:352
+#: post-install.xml:351
 #, no-c-format
 msgid ""
 "If you intend to use a graphical mail program and use a mail server of your "
@@ -594,7 +615,7 @@ msgstr ""
 "valt buiten het bestek van deze handleiding)."
 
 #. Tag: para
-#: post-install.xml:361
+#: post-install.xml:360
 #, no-c-format
 msgid ""
 "However, in that case you may need to configure individual utilities to "
@@ -611,7 +632,7 @@ msgstr ""
 "versturen van een bugrapport."
 
 #. Tag: para
-#: post-install.xml:369
+#: post-install.xml:368
 #, no-c-format
 msgid ""
 "To correctly set up <command>reportbug</command> to use an external mail "
@@ -626,13 +647,13 @@ msgstr ""
 "SMTP-server gebruikt moet worden voor het insturen van een bugrapport."
 
 #. Tag: title
-#: post-install.xml:380
+#: post-install.xml:379
 #, no-c-format
 msgid "Configuring the Exim4 Mail Transport Agent"
 msgstr "De Exim4 Mail Transport Agent configureren"
 
 #. Tag: para
-#: post-install.xml:381
+#: post-install.xml:380
 #, no-c-format
 msgid ""
 "If you would like your system to also handle external e-mail, you will need "
@@ -646,13 +667,13 @@ msgstr ""
 "door een andere MTA/MDA. </para> </footnote>:"
 
 #. Tag: screen
-#: post-install.xml:393
+#: post-install.xml:392
 #, no-c-format
 msgid "# dpkg-reconfigure exim4-config"
 msgstr "# dpkg-reconfigure exim4-config"
 
 #. Tag: para
-#: post-install.xml:395
+#: post-install.xml:394
 #, no-c-format
 msgid ""
 "After entering that command (as root), you will be asked if you want split "
@@ -664,7 +685,7 @@ msgstr ""
 "twijfel de voorgestelde optie."
 
 #. Tag: para
-#: post-install.xml:401
+#: post-install.xml:400
 #, no-c-format
 msgid ""
 "Next you will be presented with several common mail scenarios. Choose the "
@@ -675,13 +696,13 @@ msgstr ""
 "behoeften."
 
 #. Tag: term
-#: post-install.xml:410
+#: post-install.xml:409
 #, no-c-format
 msgid "internet site"
 msgstr "internet-site"
 
 #. Tag: para
-#: post-install.xml:411
+#: post-install.xml:410
 #, no-c-format
 msgid ""
 "Your system is connected to a network and your mail is sent and received "
@@ -695,13 +716,13 @@ msgstr ""
 "een lijst van domeinen waarvoor u e-mail aanvaardt of doorzendt."
 
 #. Tag: term
-#: post-install.xml:422
+#: post-install.xml:421
 #, no-c-format
 msgid "mail sent by smarthost"
 msgstr "e-mail verzenden via smarthost"
 
 #. Tag: para
-#: post-install.xml:423
+#: post-install.xml:422
 #, no-c-format
 msgid ""
 "In this scenario your outgoing mail is forwarded to another machine, called "
@@ -720,7 +741,7 @@ msgstr ""
 "fetchmail."
 
 #. Tag: para
-#: post-install.xml:433
+#: post-install.xml:432
 #, no-c-format
 msgid ""
 "In a lot of cases the smarthost will be your ISP's mail server, which makes "
@@ -733,13 +754,13 @@ msgstr ""
 "of mogelijk zelfs een ander systeem binnen uw eigen netwerk."
 
 #. Tag: term
-#: post-install.xml:443
+#: post-install.xml:442
 #, no-c-format
 msgid "mail sent by smarthost; no local mail"
 msgstr "e-mail verzenden via smarthost; geen lokale e-mail"
 
 #. Tag: para
-#: post-install.xml:444
+#: post-install.xml:443
 #, no-c-format
 msgid ""
 "This option is basically the same as the previous one except that the system "
@@ -751,25 +772,25 @@ msgstr ""
 "op het systeem zelf (bijv. voor de systeembeheerder) wordt wel verwerkt."
 
 #. Tag: term
-#: post-install.xml:455
+#: post-install.xml:454
 #, no-c-format
 msgid "local delivery only"
 msgstr "alleen lokale e-mail"
 
 #. Tag: para
-#: post-install.xml:456
+#: post-install.xml:455
 #, no-c-format
 msgid "This is the option your system is configured for by default."
 msgstr "Standaard wordt uw systeem op deze optie ingesteld."
 
 #. Tag: term
-#: post-install.xml:464
+#: post-install.xml:463
 #, no-c-format
 msgid "no configuration at this time"
 msgstr "nu niet configureren"
 
 #. Tag: para
-#: post-install.xml:465
+#: post-install.xml:464
 #, no-c-format
 msgid ""
 "Choose this if you are absolutely convinced you know what you are doing. "
@@ -784,7 +805,7 @@ msgstr ""
 "hulpprogramma's op het systeem misloopt."
 
 #. Tag: para
-#: post-install.xml:476
+#: post-install.xml:475
 #, no-c-format
 msgid ""
 "If none of these scenarios suits your needs, or if you need a finer grained "
@@ -805,7 +826,7 @@ msgstr ""
 "vermeldt ook waar u aanvullende documentatie kunt vinden."
 
 #. Tag: para
-#: post-install.xml:487
+#: post-install.xml:486
 #, no-c-format
 msgid ""
 "Note that sending mail directly to the Internet when you don't have an "
@@ -827,13 +848,13 @@ msgstr ""
 "addresses</filename>."
 
 #. Tag: title
-#: post-install.xml:505
+#: post-install.xml:504
 #, no-c-format
 msgid "Compiling a New Kernel"
 msgstr "Een nieuwe kernel compileren"
 
 #. Tag: para
-#: post-install.xml:506
+#: post-install.xml:505
 #, no-c-format
 msgid ""
 "Why would someone want to compile a new kernel? It is most probably not "
@@ -845,7 +866,7 @@ msgstr ""
 "door &debian; geleverd wordt, bijna met alle configuraties overweg kan."
 
 #. Tag: para
-#: post-install.xml:512
+#: post-install.xml:511
 #, no-c-format
 msgid ""
 "If you want to compile your own kernel nevertheless, this is of course "
@@ -859,13 +880,13 @@ msgstr ""
 "Kernel Handbook</ulink>."
 
 #. Tag: title
-#: post-install.xml:527
+#: post-install.xml:526
 #, no-c-format
 msgid "Recovering a Broken System"
 msgstr "Een defect systeem herstellen"
 
 #. Tag: para
-#: post-install.xml:528
+#: post-install.xml:527
 #, no-c-format
 msgid ""
 "Sometimes, things go wrong, and the system you've carefully installed is no "
@@ -886,7 +907,7 @@ msgstr ""
 "zijn."
 
 #. Tag: para
-#: post-install.xml:538
+#: post-install.xml:537
 #, no-c-format
 msgid ""
 "To access rescue mode, select <userinput>rescue</userinput> from the boot "
@@ -912,7 +933,7 @@ msgstr ""
 "gebruik kunt maken van uw schijven, netwerkapparatuur enzovoort."
 
 #. Tag: para
-#: post-install.xml:555
+#: post-install.xml:554
 #, no-c-format
 msgid ""
 "Instead of the partitioning tool, you should now be presented with a list of "
@@ -929,7 +950,7 @@ msgstr ""
 "gecreëerd werden."
 
 #. Tag: para
-#: post-install.xml:563
+#: post-install.xml:562
 #, no-c-format
 msgid ""
 "If possible, the installer will now present you with a shell prompt in the "
@@ -948,7 +969,7 @@ msgstr ""
 "phrase>"
 
 #. Tag: para
-#: post-install.xml:575
+#: post-install.xml:574
 #, no-c-format
 msgid ""
 "If the installer cannot run a usable shell in the root file system you "
@@ -968,7 +989,7 @@ msgstr ""
 "aangekoppeld worden op de map <filename>/target</filename>."
 
 #. Tag: para
-#: post-install.xml:584
+#: post-install.xml:583
 #, no-c-format
 msgid "In either case, after you exit the shell, the system will reboot."
 msgstr ""
@@ -976,7 +997,7 @@ msgstr ""
 "verlaten."
 
 #. Tag: para
-#: post-install.xml:588
+#: post-install.xml:587
 #, no-c-format
 msgid ""
 "Finally, note that repairing broken systems can be difficult, and this "
diff --git a/po/nl/using-d-i.po b/po/nl/using-d-i.po
index c2a7b3e7c..a59be089f 100644
--- a/po/nl/using-d-i.po
+++ b/po/nl/using-d-i.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual/using-d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-08-10 23:04+0000\n"
+"POT-Creation-Date: 2019-08-11 15:17+0000\n"
 "PO-Revision-Date: 2018-08-25 21:02+0200\n"
 "Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
 "Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
@@ -434,10 +434,13 @@ msgstr "console-setup"
 
 #. Tag: para
 #: using-d-i.xml:212
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Shows a list of keyboards, from which the user chooses the model which "
+#| "matches his own."
 msgid ""
-"Shows a list of keyboards, from which the user chooses the model which "
-"matches his own."
+"Shows a list of keyboard layouts, from which the user chooses the one which "
+"matches his own model."
 msgstr ""
 "Toont een lijst van toetsenborden waaruit de gebruiker het model kan kiezen "
 "dat overeenkomt met het zijne."
@@ -669,9 +672,10 @@ msgstr ""
 
 #. Tag: term
 #: using-d-i.xml:348
-#, no-c-format
-msgid "lvmcfg"
-msgstr "lvmcfg"
+#, fuzzy, no-c-format
+#| msgid "partman"
+msgid "partman-lvm"
+msgstr "partman"
 
 #. Tag: para
 #: using-d-i.xml:348
@@ -685,9 +689,10 @@ msgstr ""
 
 #. Tag: term
 #: using-d-i.xml:357
-#, no-c-format
-msgid "mdcfg"
-msgstr "mdcfg"
+#, fuzzy, no-c-format
+#| msgid "partman"
+msgid "partman-md"
+msgstr "partman"
 
 #. Tag: para
 #: using-d-i.xml:357
@@ -2710,14 +2715,22 @@ msgstr "Meervoudige schijfapparaten configureren (Software RAID)"
 
 #. Tag: para
 #: using-d-i.xml:1524
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you have more than one harddrive<footnote><para> To be honest, you can "
+#| "construct an MD device even from partitions residing on single physical "
+#| "drive, but that won't give any benefits. </para></footnote> in your "
+#| "computer, you can use <command>mdcfg</command> to set up your drives for "
+#| "increased performance and/or better reliability of your data. The result "
+#| "is called <firstterm>Multidisk Device</firstterm> (or after its most "
+#| "famous variant <firstterm>software RAID</firstterm>)."
 msgid ""
 "If you have more than one harddrive<footnote><para> To be honest, you can "
 "construct an MD device even from partitions residing on single physical "
 "drive, but that won't give any benefits. </para></footnote> in your "
-"computer, you can use <command>mdcfg</command> to set up your drives for "
-"increased performance and/or better reliability of your data. The result is "
-"called <firstterm>Multidisk Device</firstterm> (or after its most famous "
+"computer, you can use <command>partman-md</command> to set up your drives "
+"for increased performance and/or better reliability of your data. The result "
+"is called <firstterm>Multidisk Device</firstterm> (or after its most famous "
 "variant <firstterm>software RAID</firstterm>)."
 msgstr ""
 "Als u in uw computer meer dan één harde schijf<footnote><para>Om eerlijk te "
@@ -3055,12 +3068,21 @@ msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:1743
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Next, you should choose <guimenuitem>Configure software RAID</"
+#| "guimenuitem> from the main <command>partman</command> menu. (The menu "
+#| "will only appear after you mark at least one partition for use as "
+#| "<guimenuitem>physical volume for RAID</guimenuitem>.) On the first screen "
+#| "of <command>mdcfg</command> simply select <guimenuitem>Create MD device</"
+#| "guimenuitem>. You will be presented with a list of supported types of MD "
+#| "devices, from which you should choose one (e.g. RAID1). What follows "
+#| "depends on the type of MD you selected."
 msgid ""
 "Next, you should choose <guimenuitem>Configure software RAID</guimenuitem> "
 "from the main <command>partman</command> menu. (The menu will only appear "
 "after you mark at least one partition for use as <guimenuitem>physical "
-"volume for RAID</guimenuitem>.) On the first screen of <command>mdcfg</"
+"volume for RAID</guimenuitem>.) On the first screen of <command>partman-md</"
 "command> simply select <guimenuitem>Create MD device</guimenuitem>. You will "
 "be presented with a list of supported types of MD devices, from which you "
 "should choose one (e.g. RAID1). What follows depends on the type of MD you "
@@ -3171,10 +3193,15 @@ msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:1810
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "After you set up MD devices to your liking, you can <guimenuitem>Finish</"
+#| "guimenuitem> <command>mdcfg</command> to return back to the "
+#| "<command>partman</command> to create filesystems on your new MD devices "
+#| "and assign them the usual attributes like mountpoints."
 msgid ""
 "After you set up MD devices to your liking, you can <guimenuitem>Finish</"
-"guimenuitem> <command>mdcfg</command> to return back to the "
+"guimenuitem> <command>partman-md</command> to return back to the "
 "<command>partman</command> to create filesystems on your new MD devices and "
 "assign them the usual attributes like mountpoints."
 msgstr ""
@@ -6107,6 +6134,12 @@ msgstr ""
 "firmware-pakket (als dat bestaat) geïnstalleerd wordt nadat de installatie "
 "afgerond is."
 
+#~ msgid "lvmcfg"
+#~ msgstr "lvmcfg"
+
+#~ msgid "mdcfg"
+#~ msgstr "mdcfg"
+
 #~ msgid ""
 #~ "Another option when choosing to specify the mirror manually is to use "
 #~ "<quote>httpredir.debian.org</quote> as your mirror. <quote>httpredir."