more updates

1 files changed, 212 insertions, 1056 deletions

diff --git a/po/el/random-bits.po b/po/el/random-bits.po
index 363b07f76..c5bea747d 100644
--- a/po/el/random-bits.po
+++ b/po/el/random-bits.po
@@ -2,19 +2,21 @@
 # translation of random-bits.po to Greek
 # Copyright (C) 2005 Free Software Foundation, Inc.
 # Greek Translation Team <debian-l10n-greek@lists.debian.org>, 2005.
+# quad-nrg.net <galaxico@quad-nrg.net>, 2005.
 #
 msgid ""
 msgstr ""
 "Project-Id-Version: random-bits\n"
 "POT-Creation-Date: 2001-02-09 01:25+0100\n"
-"PO-Revision-Date: 2005-07-14 00:33+0300\n"
-"Last-Translator: \n"
-"Language-Team:  <en@li.org>\n"
+"PO-Revision-Date: 2005-12-26 02:09+0200\n"
+"Last-Translator: quad-nrg.net <galaxico@quad-nrg.net>\n"
+"Language-Team: Greek <debian-l10n-greek@lists.debian.org>\n"
 "MIME-Version: 1.0\n"
 "Content-Type: application/x-xml2pot; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "org>\n"
-"X-Generator: KBabel 1.9.1\n"
+"X-Generator: KBabel 1.10.2\n"
+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
 
 #. Tag: title
 #: random-bits.xml:4
@@ -66,11 +68,11 @@ msgstr ""
 msgid ""
 "A <quote>clean</quote> example file is available from &urlset-example-"
 "preseed;."
-msgstr ""
+msgstr "Ένα <quote>καθαρό</quote> αρχείο παραδείγματος είναι διαθέσιμο από το &urlset-example-preseed;."
 
 #. Tag: screen
 #: random-bits.xml:41
-#, fuzzy, no-c-format
+#, no-c-format
 msgid ""
 "#### Startup.\n"
 "\n"
@@ -442,28 +444,34 @@ msgid ""
 "# you can use debconf-set-selections:\n"
 "#   debconf-set-selections -c preseed.cfg"
 msgstr ""
-"#### Modifying syslinux.cfg.\n"
+"#### Startup.\n"
 "\n"
-"# Edit the syslinux.cfg (or similar) file, and add parameters to the end\n"
+"# To use a preseed file, you'll first need to boot the installer,\n"
+"# and tell it what preseed file to use. This is done by passing the\n"
+"# kernel a boot parameter, either manually at boot or by editing the\n"
+"# syslinux.cfg (or similar) file and adding the parameter to the end\n"
 "# of the append line(s) for the kernel.\n"
 "#\n"
-"# You'll at least want to add a parameter telling the installer where to\n"
-"# get its preseed file from.\n"
-"# If you're installing from USB media, use this, and put the preseed file\n"
-"# in the toplevel directory of the USB stick.\n"
-"#   preseed/file=/hd-media/preseed\n"
-"# If you're netbooting, use this instead:\n"
+"# If you're netbooting, use this:\n"
 "#   preseed/url=http://host/path/to/preseed\n"
 "# If you're remastering a CD, you could use this:\n"
 "#   preseed/file=/cdrom/preseed\n"
+"# If you're installing from USB media, use this, and put the preseed file\n"
+"# in the toplevel directory of the USB stick.\n"
+"#   preseed/file=/hd-media/preseed\n"
 "# Be sure to copy this file to the location you specify.\n"
 "#\n"
-"  # To make sure the installer gets the right preseed file, you can specify\n"
-"# a checksum for the file. Currently this needs to be a md5sum, and if\n"
-"# specified it must match the file or the installer will refuse to use the\n"
-"# file. (Checksums are not supported in the sarge installer.)\n"
-"#   preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
-"#   preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
+"# Some parts of the installation process cannot be automated using\n"
+"# some forms of preseeding, because the questions are asked before\n"
+"# the preseed file is loaded. For example, if the preseed file is\n"
+"# downloaded over the network, the network setup must be done first.\n"
+"# One reason to use initrd preseeding is that it allows preseeding\n"
+"# of even these early steps of the installation process.\n"
+"#\n"
+"# If a preseed file cannot be used to preseed some steps, the install can\n"
+"# still be fully automated, since you can pass preseed values to the kernel\n"
+"# on the command line. Just pass path/to/var=value for any of the preseed\n"
+"# variables listed below.\n"
 "#\n"
 "# While you're at it, you may want to throw a debconf/priority=critical in\n"
 "# there, to avoid most questions even if the preseeding below misses some.\n"
@@ -471,22 +479,6 @@ msgstr ""
 "hit\n"
 "# enter to boot the installer.\n"
 "#\n"
-"# Language, country, and keyboard selection cannot be preseeded from a "
-"file,\n"
-"# because the questions are asked before the preseed file can be loaded.\n"
-"# Instead, to avoid these questions, pass some more parameters to the "
-"kernel.\n"
-"# If you are using the sarge installer, you need three:\n"
-"#\n"
-"#    languagechooser/language-name=English\n"
-"#    countrychooser/shortlist=US\n"
-"#    console-keymaps-at/keymap=us\n"
-"#\n"
-"# Newer versions of the installer need only two:\n"
-"#\n"
-"#    debian-installer/locale=en_US\n"
-"#    console-keymaps-at/keymap=us\n"
-"#\n"
 "# Note that the kernel accepts a maximum of 8 command line options and\n"
 "# 8 environment options (including any options added by default for the\n"
 "# installer). If these numbers are exceeded, 2.4 kernels will drop any\n"
@@ -497,34 +489,11 @@ msgstr ""
 "# for most installations, which may allow you to add more options for\n"
 "# preseeding.\n"
 "\n"
-"#### Shell commands.\n"
-"\n"
-"# d-i preseeding is inherently not secure. Nothing in the installer checks\n"
-"# for attempts at buffer overflows or other exploits of the values of a\n"
-"# preseed file like this one. Only use preseed files from trusted\n"
-"# locations! To drive that home, and because it's generally useful, here's\n"
-"# a way to run any shell command you'd like inside the installer,\n"
-"# automatically.\n"
-"\n"
-"# This first command is run as early as possible, just after\n"
-"# preseeding is read.\n"
-"#d-i preseed/early_command              string \\\n"
-"#    wget http://url/to/my.udeb -O /tmp/my.udeb; udpkg -i /tmp/my.udeb\n"
-"\n"
-"# This command is run just before the install finishes, but when there is\n"
-"# still a usable /target directory.\n"
-"#d-i preseed/late_command               string \\\n"
-"#    for deb in /hd-media/*.deb; do cp $deb /target/tmp; \\\n"
-"#    chroot /target dpkg -i /tmp/$(basename $deb); done\n"
-"\n"
-"# This command is run just as base-config is starting up.\n"
-"#base-config base-config/early_command  string echo hi mom\n"
-"\n"
-"# This command is run after base-config is done, just before the login:\n"
-"# prompt. This is a good way to install a set of packages you want, or to\n"
-"# tweak the configuration of the system.\n"
-"#base-config base-config/late_command   string \\\n"
-"#    apt-get install zsh; chsh -s /bin/zsh\n"
+"# It is not possible to use preseeding to set language, country, and\n"
+"# keyboard. Instead you should use kernel parameters. Example:\n"
+"# languagechooser/language-name=English\n"
+"# countrychooser/shortlist=US\n"
+"# console-keymaps-at/keymap=us\n"
 "\n"
 "#### Network configuration.\n"
 "\n"
@@ -535,36 +504,40 @@ msgstr ""
 "\n"
 "# netcfg will choose an interface that has link if possible. This makes it\n"
 "# skip displaying a list if there is more than one interface.\n"
-"d-i  netcfg/choose_interface            select auto\n"
+"d-i netcfg/choose_interface select auto\n"
+"\n"
+"# If you have a slow dhcp server and the installer times out waiting for\n"
+"# it, this might be useful.\n"
+"#d-i netcfg/dhcp_timeout string 60\n"
 "\n"
 "# If you prefer to configure the network manually, here's how:\n"
-"#d-i netcfg/disable_dhcp                boolean true\n"
-"#d-i netcfg/get_nameservers             string 192.168.1.1\n"
-"#d-i netcfg/get_ipaddress               string 192.168.1.42\n"
-"#d-i netcfg/get_netmask                 string 255.255.255.0\n"
-"#d-i netcfg/get_gateway                 string 192.168.1.1\n"
-"#d-i netcfg/confirm_static              boolean true\n"
+"#d-i netcfg/disable_dhcp boolean true\n"
+"#d-i netcfg/get_nameservers string 192.168.1.1\n"
+"#d-i netcfg/get_ipaddress string 192.168.1.42\n"
+"#d-i netcfg/get_netmask string 255.255.255.0\n"
+"#d-i netcfg/get_gateway string 192.168.1.1\n"
+"#d-i netcfg/confirm_static boolean true\n"
 "\n"
 "# Note that any hostname and domain names assigned from dhcp take\n"
 "# precedence over values set here. However, setting the values still\n"
 "# prevents the questions from being shown even if values come from dhcp.\n"
-"d-i  netcfg/get_hostname                string unassigned-hostname\n"
-"d-i  netcfg/get_domain                  string unassigned-domain\n"
+"d-i netcfg/get_hostname string unassigned-hostname\n"
+"d-i netcfg/get_domain string unassigned-domain\n"
 "\n"
 "# Disable that annoying WEP key dialog.\n"
-"d-i  netcfg/wireless_wep                string\n"
+"d-i netcfg/wireless_wep string\n"
 "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
-"#d-i netcfg/dhcp_hostname               string radish\n"
+"#d-i netcfg/dhcp_hostname string radish\n"
 "\n"
 "#### Mirror settings.\n"
 "\n"
-"d-i  mirror/country                     string enter information manually\n"
-"d-i  mirror/http/hostname               string http.us.debian.org\n"
-"d-i  mirror/http/directory              string /debian\n"
-"d-i  mirror/suite                       string testing\n"
-"d-i  mirror/http/proxy                  string\n"
+"d-i mirror/country string enter information manually\n"
+"d-i mirror/http/hostname string http.us.debian.org\n"
+"d-i mirror/http/directory string /debian\n"
+"d-i mirror/suite string testing\n"
+"d-i mirror/http/proxy string\n"
 "\n"
-"### Partitioning.\n"
+"#### Partitioning.\n"
 "\n"
 "# If the system has free space you can choose to only partition that space.\n"
 "#d-i partman-auto/init_automatically_partition \\\n"
@@ -573,25 +546,25 @@ msgstr ""
 "# Alternatively, you can specify a disk to partition. The device name can\n"
 "# be given in either devfs or traditional non-devfs format.\n"
 "# For example, to use the first disk devfs knows of:\n"
-"d-i  partman-auto/disk                  string /dev/discs/disc0/disc\n"
+"d-i partman-auto/disk string /dev/discs/disc0/disc\n"
 "\n"
 "# You can choose from any of the predefined partitioning recipes:\n"
-"d-i  partman-auto/choose_recipe         select \\\n"
+"d-i partman-auto/choose_recipe select \\\n"
 "     All files in one partition (recommended for new users)\n"
-"#d-i partman-auto/choose_recipe         select Desktop machine\n"
-"#d-i partman-auto/choose_recipe         select Multi-user workstation\n"
+"#d-i partman-auto/choose_recipe select Desktop machine\n"
+"#d-i partman-auto/choose_recipe select Multi-user workstation\n"
 "\n"
 "# Or provide a recipe of your own...\n"
 "# The recipe format is documented in the file devel/partman-auto-recipe."
 "txt.\n"
 "# If you have a way to get a recipe file into the d-i environment, you can\n"
 "# just point at it.\n"
-"#d-i partman-auto/expert_recipe_file    string /hd-media/recipe\n"
+"#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n"
 "\n"
 "# If not, you can put an entire recipe in one line. This example creates\n"
 "# a small /boot partition, suitable swap, and uses the rest of the space\n"
 "# for the root partition:\n"
-"#d-i partman-auto/expert_recipe         string boot-root :: \\\n"
+"#d-i partman-auto/expert_recipe string boot-root :: \\\n"
 "#    20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } \\\n"
 "#    use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . \\\n"
 "#    500 10000 1000000000 ext3 method{ format } format{ } \\\n"
@@ -615,151 +588,174 @@ msgstr ""
 "#       .\n"
 "\n"
 "# This makes partman automatically partition without confirmation.\n"
-"d-i partman/confirm_write_new_label     boolean true\n"
-"d-i partman/choose_partition            select \\\n"
+"d-i partman/confirm_write_new_label boolean true\n"
+"d-i partman/choose_partition select \\\n"
 "    Finish partitioning and write changes to disk\n"
-"d-i partman/confirm                     boolean true\n"
+"d-i partman/confirm boolean true\n"
 "\n"
 "#### Boot loader installation.\n"
 "\n"
 "# Grub is the default boot loader (for x86). If you want lilo installed\n"
 "# instead, uncomment this:\n"
-"#d-i grub-installer/skip                boolean true\n"
+"#d-i grub-installer/skip boolean true\n"
 "\n"
 "# This is fairly safe to set, it makes grub install automatically to the "
 "MBR\n"
 "# if no other operating system is detected on the machine.\n"
-"d-i  grub-installer/only_debian         boolean true\n"
+"d-i grub-installer/only_debian boolean true\n"
 "\n"
 "# This one makes grub-installer install to the MBR if if finds some other "
 "OS\n"
 "# too, which is less safe as it might not be able to boot that other OS.\n"
-"d-i  grub-installer/with_other_os       boolean true\n"
+"d-i grub-installer/with_other_os boolean true\n"
 "\n"
 "# Alternatively, if you want to install to a location other than the mbr,\n"
 "# uncomment and edit these lines:\n"
-"#d-i grub-installer/bootdev             string (hd0,0)\n"
-"#d-i grub-installer/only_debian         boolean false\n"
-"#d-i grub-installer/with_other_os       boolean false\n"
+"#d-i grub-installer/bootdev  string (hd0,0)\n"
+"#d-i grub-installer/only_debian boolean false\n"
+"#d-i grub-installer/with_other_os boolean false\n"
 "\n"
-"##### Finishing up the first stage install.\n"
+"#### Finishing up the first stage install.\n"
 "\n"
 "# Avoid that last message about the install being complete.\n"
-"d-i  prebaseconfig/reboot_in_progress   note\n"
+"d-i prebaseconfig/reboot_in_progress note\n"
+"\n"
+"#### Shell commands.\n"
+"\n"
+"# d-i preseeding is inherently not secure. Nothing in the installer checks\n"
+"# for attempts at buffer overflows or other exploits of the values of a\n"
+"# preseed file like this one. Only use preseed files from trusted\n"
+"# locations! To drive that home, and because it's generally useful, here's\n"
+"# a way to run any shell command you'd like inside the installer,\n"
+"# automatically.\n"
+"\n"
+"# This first command is run as early as possible, just after\n"
+"# preseeding is read.\n"
+"#d-i preseed/early_command string anna-install some-udeb\n"
+"\n"
+"# This command is run just before the install finishes, but when there is\n"
+"# still a usable /target directory.\n"
+"#d-i preseed/late_command string echo foo > /target/etc/bar\n"
+"\n"
+"# This command is run just as base-config is starting up.\n"
+"#base-config base-config/early_command string echo hi mom\n"
+"\n"
+"# This command is run after base-config is done, just before the login:\n"
+"# prompt. This is a good way to install a set of packages you want, or to\n"
+"# tweak the configuration of the system.\n"
+"#base-config base-config/late_command string \\\n"
+"#    apt-get install zsh; chsh -s /bin/zsh\n"
 "\n"
+"###### Preseeding the 2nd stage of the installation.\n"
 "\n"
-"##### Preseeding base-config.\n"
+"#### Preseeding base-config.\n"
 "\n"
 "# Avoid the introductory message.\n"
-"base-config  base-config/intro          note\n"
+"base-config base-config/intro note\n"
 "\n"
 "# Avoid the final message.\n"
-"base-config  base-config/login          note\n"
+"base-config base-config/login note\n"
 "\n"
 "# If you installed a display manager, but don't want to start it "
 "immediately\n"
 "# after base-config finishes.\n"
-"#base-config base-config/start-display-manager        boolean false\n"
-"\n"
-"###### Time zone setup.\n"
-"\n"
-"# Controls whether or not the hardware clock is set to GMT.\n"
-"base-config  tzconfig/gmt                             boolean true\n"
+"#base-config base-config/start-display-manager boolean false\n"
 "\n"
-"# Simple timezone preseeding. You may set this to any valid setting for "
-"$TZ;\n"
-"# see the contents of /usr/share/zoneinfo/ for options.\n"
-"base-config  tzconfig/preseed_zone                    string US/Eastern\n"
+"# Some versions of the installer can report back on what you've installed.\n"
+"# The default is not to report back, but sending reports helps the project\n"
+"# determine what software is most popular and include it on CDs.\n"
+"#popularity-contest popularity-contest/participate boolean false\n"
 "\n"
-"# Timezone preseeding used to be more complex; the old method is documented\n"
-"# here as well for completeness. If you're using sarge, you'll need this\n"
-"# method.\n"
+"#### Clock and time zone setup.\n"
 "\n"
+"# Controls whether or not the hardware clock is set to UTC.\n"
+"#base-config tzconfig/gmt boolean true\n"
 "# If you told the installer that you're in the United States, then you\n"
 "# can set the time zone using this variable.\n"
 "# (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii,\n"
 "# Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, other)\n"
-"#base-config tzconfig/choose_country_zone/US          select Eastern\n"
+"#base-config tzconfig/choose_country_zone/US select Eastern\n"
 "# If you told it you're in Canada.\n"
 "# (Choices are: Newfoundland, Atlantic, Eastern, Central,\n"
 "# East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other)\n"
-"#base-config tzconfig/choose_country_zone/CA          select Eastern\n"
+"#base-config tzconfig/choose_country_zone/CA select Eastern\n"
 "# If you told it you're in Brazil. (Choices are: East, West, Acre,\n"
 "# DeNoronha, other)\n"
-"#base-config tzconfig/choose_country_zone/BR          select East\n"
+"#base-config tzconfig/choose_country_zone/BR select East\n"
 "# Many countries have only one time zone. If you told the installer you're\n"
 "# in one of those countries, you can choose its standard time zone via this\n"
 "# question.\n"
-"#base-config tzconfig/choose_country_zone_single      boolean true\n"
+"#base-config tzconfig/choose_country_zone_single boolean true\n"
 "# This question is asked as a fallback for countries other than those\n"
 "# listed above, which have more than one time zone. You can preseed one of\n"
 "# the time zones, or \"other\".\n"
-"#base-config tzconfig/choose_country_zone_multiple    select\n"
+"#base-config tzconfig/choose_country_zone_multiple select\n"
 "\n"
-"###### Account setup.\n"
+"#### Account setup.\n"
 "\n"
 "# To preseed the root password, you have to put it in the clear in this\n"
 "# file. That is not a very good idea, use caution!\n"
-"#passwd passwd/root-password            password r00tme\n"
-"#passwd passwd/root-password-again      password r00tme\n"
+"#passwd passwd/root-password password r00tme\n"
+"#passwd passwd/root-password-again password r00tme\n"
 "\n"
 "# If you want to skip creation of a normal user account.\n"
-"#passwd passwd/make-user                boolean false\n"
+"#passwd passwd/make-user boolean false\n"
 "\n"
 "# Alternatively, you can preseed the user's name and login.\n"
-"#passwd passwd/user-fullname            string Debian User\n"
-"#passwd passwd/username                 string debian\n"
+"#passwd passwd/user-fullname string Debian User\n"
+"#passwd passwd/username string debian\n"
 "# And their password, but use caution!\n"
-"#passwd passwd/user-password            password insecure\n"
-"#passwd passwd/user-password-again      password insecure\n"
+"#passwd passwd/user-password password insecure\n"
+"#passwd passwd/user-password-again password insecure\n"
 "\n"
-"###### Apt setup.\n"
+"#### Apt setup.\n"
 "\n"
 "# This question controls what source the second stage installation uses\n"
 "# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list\n"
 "# by hand\n"
-"base-config  apt-setup/uri_type         select http\n"
+"base-config apt-setup/uri_type select http\n"
 "\n"
 "# If you choose ftp or http, you'll be asked for a country and a mirror.\n"
-"base-config  apt-setup/country          select enter information manually\n"
-"base-config  apt-setup/hostname         string http.us.debian.org\n"
-"base-config  apt-setup/directory        string /debian\n"
+"base-config apt-setup/country select enter information manually\n"
+"base-config apt-setup/hostname string http.us.debian.org\n"
+"base-config apt-setup/directory string /debian\n"
 "# Stop after choosing one mirror.\n"
-"base-config  apt-setup/another          boolean false\n"
+"base-config apt-setup/another boolean false\n"
 "\n"
 "# You can choose to install non-free and contrib software.\n"
-"#base-config apt-setup/non-free         boolean true\n"
-"#base-config apt-setup/contrib          boolean true\n"
+"#base-config apt-setup/non-free boolean true\n"
+"#base-config apt-setup/contrib boolean true\n"
 "\n"
 "# Do enable security updates.\n"
-"base-config  apt-setup/security-updates boolean true\n"
+"base-config apt-setup/security-updates boolean true\n"
 "\n"
-"###### Package selection.\n"
+"#### Package selection.\n"
 "\n"
 "# You can choose to install any combination of tasks that are available.\n"
 "# Available tasks as of this writing include: Desktop environment,\n"
 "# Web server, Print server, DNS server, File server, Mail server,\n"
-"# SQL database, manual package selection. The last of those will run\n"
-"# aptitude. You can also choose to install no tasks, and force the\n"
-"# installation of a set of packages in some other way.\n"
-"tasksel      tasksel/first   multiselect Desktop environment\n"
-"#tasksel     tasksel/first   multiselect Web server, Mail server, DNS "
-"server\n"
+"# SQL database, Laptop, Standard system, manual package selection. The\n"
+"# last of those will run aptitude. You can also choose to install no\n"
+"# tasks, and force the installation of a set of packages in some other\n"
+"# way. We recommend always including the Standard system task.\n"
+"tasksel tasksel/first multiselect Desktop environment, Standard system\n"
+"#tasksel tasksel/first multiselect Web server, Standard system\n"
 "\n"
-"###### Mailer configuration.\n"
+"#### Mailer configuration.\n"
 "\n"
-"# During a normal install, exim asks only two questions. Here's how to\n"
+"# During a normal install, exim asks only a few questions. Here's how to\n"
 "# avoid even those. More complicated preseeding is possible.\n"
 "exim4-config exim4/dc_eximconfig_configtype \\\n"
 "    select no configuration at this time\n"
 "exim4-config exim4/no_config boolean true\n"
+"exim4-config exim4/no_config boolean true\n"
 "\n"
 "# It's a good idea to set this to whatever user account you choose to\n"
 "# create. Leaving the value blank results in postmaster mail going to\n"
 "# /var/mail/mail.\n"
-"exim4-config exim4/dc_postmaster        string\n"
+"exim4-config exim4/dc_postmaster string\n"
 "\n"
-"###### X Configuration.\n"
+"#### X Configuration.\n"
 "\n"
 "# Preseeding Debian's X config is possible, but you probably need to know\n"
 "# some details about the video hardware of the machine, since Debian's X\n"
@@ -772,22 +768,22 @@ msgstr ""
 "# A caveat with mouse autodetection is that if it fails, X will retry it\n"
 "# over and over. So if it's preseeded to be done, there is a possibility of\n"
 "# an infinite loop if the mouse is not autodetected.\n"
-"#xserver-xfree86 xserver-xfree86/autodetect_mouse     boolean true\n"
+"#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true\n"
 "\n"
 "# Monitor autodetection is recommended.\n"
-"xserver-xfree86 xserver-xfree86/autodetect_monitor    boolean true\n"
+"xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true\n"
 "# Uncomment if you have an LCD display.\n"
-"#xserver-xfree86 xserver-xfree86/config/monitor/lcd   boolean true\n"
+"#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true\n"
 "# X has three configuration paths for the monitor. Here's how to preseed\n"
 "# the \"medium\" path, which is always available. The \"simple\" path may "
 "not\n"
 "# be available, and the \"advanced\" path asks too many questions.\n"
-"xserver-xfree86  xserver-xfree86/config/monitor/selection-method \\\n"
+"xserver-xfree86 xserver-xfree86/config/monitor/selection-method \\\n"
 "    select medium\n"
-"xserver-xfree86  xserver-xfree86/config/monitor/mode-list \\\n"
+"xserver-xfree86 xserver-xfree86/config/monitor/mode-list \\\n"
 "    select 1024x768 @ 60 Hz\n"
 "\n"
-"###### Everything else.\n"
+"#### Everything else.\n"
 "\n"
 "# Depending on what software you choose to install, or if things go wrong\n"
 "# during the installation process, it's possible that other questions may\n"
@@ -803,20 +799,13 @@ msgstr ""
 "# loaded. The included files can have preseed/include directives of their\n"
 "# own as well. Note that if the filenames are relative, they are taken from\n"
 "# the same directory as the preseed file that includes them.\n"
-"#d-i preseed/include                    string x.cfg\n"
-"\n"
-"# The installer can optionally verify checksums of preseed files before\n"
-"# using them. Currently only md5sums are supported, list the md5sums\n"
-"# in the same order as the list of files to include.\n"
-"# (Checksums are not supported in the sarge installer.)\n"
-"#d-i pressed/include/checksum                string "
-"5da499872becccfeda2c4872f9171c3d\n"
+"#d-i preseed/include string x.cfg\n"
 "\n"
 "# More flexibly, this runs a shell command and if it outputs the names of\n"
 "# preseed files, includes those files. For example, to switch configs based\n"
 "# on a particular usb storage device (in this case, a built-in card "
 "reader):\n"
-"#d-i preseed/include_command            string \\\n"
+"#d-i preseed/include_command string \\\n"
 "#    if $(grep -q \"GUID: 0aec3050aec305000001a003\" /proc/scsi/usb-storage-"
 "*/*); \\\n"
 "#    then echo kraken.cfg; else echo otherusb.cfg; fi\n"
@@ -1636,7 +1625,7 @@ msgid ""
 "If you want to have parts of the filesystem (e.g. /usr) mounted on separate "
 "partitions, you will need to create and mount these directories manually "
 "before proceding with the next stage."
-msgstr ""
+msgstr "Αν θέλετε να έχετε μέρη του συστήματος αρχείων σας (πχ. /usr) προσαρτημένα σε διαφορετικές κατατμήσεις, θα πρέπει να δημιουργήσετε και να προσαρτήσετε αυτούς τους καταλόγους χειροκίνητα πριν προχωρήσετε στο επόμενο στάδιο."
 
 #. Tag: title
 #: random-bits.xml:406
@@ -1724,7 +1713,7 @@ msgid ""
 "minimal version of <classname>glibc</classname> installed (currently "
 "GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but it "
 "calls various utilities that require <classname>glibc</classname>."
-msgstr ""
+msgstr "Σημειώστε ότι η εκτέλεση της <command>debootstrap</command> ίσως απαιτεί να έχετε εγκατεστημένη μια ελάχιστη έκδοση της <classname>glibc</classname>(αυτή τη στιγμή η GLIBC_2.3). Η ίδια η <command>debootstrap</command> είναι ένα σκριπτ κελύφους, καλεί όμως διάφορα άλλα βοηθήματα που απαιτούν την <classname>glibc</classname>."
 
 #. Tag: title
 #: random-bits.xml:451
@@ -1822,7 +1811,7 @@ msgstr "Προσαρτήστε τα τμήματα"
 
 #. Tag: para
 #: random-bits.xml:502
-#, fuzzy, no-c-format
+#, no-c-format
 msgid ""
 "You need to create <filename>/etc/fstab</filename>. "
 "<informalexample><screen>\n"
@@ -1857,13 +1846,12 @@ msgstr ""
 "Πρέπει να δημιουργήσετε το αρχείο <filename>/etc/fstab</filename>. "
 "<informalexample><screen>\n"
 "# editor /etc/fstab\n"
-"</screen></informalexample> Εδώ υπάρχει ένα δείγμα που μπορείτε να "
-"τροποποιήσετε ώστε να ταιριάζει στις ανάγκες σας: <informalexample><screen>\n"
+"</screen></informalexample> Εδώ υπάρχει ένα δείγμα που μπορείτε να τροποποιήσετε ώστε να ταιριάζει στις ανάγκες σας: <informalexample><screen><informalexample><screen>\n"
 "# /etc/fstab: static file system information.\n"
 "#\n"
 "# file system    mount point   type    options                  dump pass\n"
-"/dev/XXX         /             ext2    defaults                 0    0\n"
-"/dev/XXX         /boot         ext2    ro,nosuid,nodev          0    2\n"
+"/dev/XXX         /             ext3    defaults                 0    1\n"
+"/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2\n"
 "\n"
 "/dev/XXX         none          swap    sw                       0    0\n"
 "proc             /proc         proc    defaults                 0    0\n"
@@ -1871,19 +1859,13 @@ msgstr ""
 "/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0\n"
 "/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0\n"
 "\n"
-"/dev/XXX         /tmp          ext2    rw,nosuid,nodev          0    2\n"
-"/dev/XXX         /var          ext2    rw,nosuid,nodev          0    2\n"
-"/dev/XXX         /usr          ext2    rw,nodev                 0    2\n"
-"/dev/XXX         /home         ext2    rw,nosuid,nodev          0    2\n"
-"</screen></informalexample> Χρησιμοποιήστε την εντολή  <userinput>mount -a</"
-"userinput> για να προσαρτήσετε όλα τα συστήματα αρχείων που έχετε "
-"προσδιορίσει στο  <filename>/etc/fstab</filename>, ή για να προσαρτήσετε "
-"μεμονωμένα συστήματα αρχείων χρησιμοποιήστε την εντολή: "
-"<informalexample><screen>\n"
+"/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2\n"
+"/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2\n"
+"/dev/XXX         /usr          ext3    rw,nodev                 0    2\n"
+"/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2\n"
+"</screen></informalexample> Χρησιμοποιήστε την εντολή <userinput>mount -a</userinput> για να προσαρτήσετε όλα τα συστήματα αρχείων που έχετε προσδιορίσει στο αρχείο <filename>/etc/fstab</filename>, ή αν θέλετε να προσαρτήσετε μεμονωμένα συστήματα αρχείων χρησιμοποιήστε: <informalexample><screen>\n"
 "# mount /path   # e.g.: mount /usr\n"
-"</screen></informalexample>Μπορείτε να προσαρτήσετε το σύστημα αρχείων proc "
-"αρκετές φορές και σε αυθαίρετες τοποθεσίες, αν και το σημείο /proc είναι το "
-"σύνηθες. Αν δεν χρησιμοποιήσατε την εντολή <userinput>mount -a</userinput>, "
+"</screen></informalexample> Μπορείτε να προσαρτήσετε το σύστημα αρχείων proc πολλαπλές φορές και σε αυθαίρετες τοποθεσίες, αν και το σημείο /proc είναι το σύνηθες. Αν δεν χρησιμοποιήσατε την εντολή <userinput>mount -a</userinput>, "
 "βεβαιωθείτε να προσαρτήσετε το proc πριν συνεχίσετε:"
 
 #. Tag: screen
@@ -1899,13 +1881,13 @@ msgid ""
 "The command <userinput>ls /proc</userinput> should now show a non-empty "
 "directory. Should this fail, you may be able to mount proc from outside the "
 "chroot:"
-msgstr ""
+msgstr "Η εντολή <userinput>ls /proc</userinput> θα πρέπει τώρα να δείξει έναν μη-κενό κατάλογο. Σε περίπτωση αποτυχίας, μπορείτε να προσαρτήσετε το proc έξω από το chroot κατάλογο:"
 
 #. Tag: screen
 #: random-bits.xml:530
-#, fuzzy, no-c-format
+#, no-c-format
 msgid "# mount -t proc proc /mnt/debinst/proc"
-msgstr "# mount -t proc proc /proc"
+msgstr "# mount -t proc proc /mnt/debinst/proc"
 
 #. Tag: title
 #: random-bits.xml:536
@@ -1931,7 +1913,7 @@ msgstr "# dpkg-reconfigure console-data"
 msgid ""
 "Note that the keyboard cannot be set while in the chroot, but will be "
 "configured for the next reboot."
-msgstr ""
+msgstr "Σημειώστε ότι δεν μπορείτε να ορίσετε το πληκτρολόγιο όσο είσαστε στο περιβάλλον chroot, αλλά θα ρυθμιστεί με την επόμενη επανεκκίνηση."
 
 #. Tag: title
 #: random-bits.xml:552
@@ -2118,10 +2100,8 @@ msgstr ""
 #. Tag: screen
 #: random-bits.xml:628
 #, no-c-format
-msgid ""
-"# apt-get install kernel-image-<replaceable>2.X.X-arch-etc</replaceable>"
-msgstr ""
-"# apt-get install kernel-image-<replaceable>2.X.X-arch-etc</replaceable>"
+msgid "# apt-get install kernel-image-<replaceable>2.X.X-arch-etc</replaceable>"
+msgstr "# apt-get install kernel-image-<replaceable>2.X.X-arch-etc</replaceable>"
 
 #. Tag: title
 #: random-bits.xml:634
@@ -2174,7 +2154,7 @@ msgstr "Εδώ είναι ένα <filename>/etc/lilo.conf</filename> σαν πα
 
 #. Tag: screen
 #: random-bits.xml:657
-#, fuzzy, no-c-format
+#, no-c-format
 msgid ""
 "boot=/dev/hda6\n"
 "root=/dev/hda6\n"
@@ -2186,7 +2166,7 @@ msgid ""
 msgstr ""
 "boot=/dev/hda6\n"
 "root=/dev/hda6\n"
-"install=/boot/boot-menu.b\n"
+"install=menu\n"
 "delay=20\n"
 "lba32\n"
 "image=/vmlinuz\n"
@@ -2245,9 +2225,9 @@ msgstr ""
 
 #. Tag: title
 #: random-bits.xml:687
-#, fuzzy, no-c-format
+#, no-c-format
 msgid "Installing &debian; over Parallel Line IP (PLIP)"
-msgstr "Εγκαθιστώντας το &debian; από ένα Σύστημα Unix/Linux"
+msgstr "Εγκαθιστώντας το &debian; πάνω από Parallel Line IP (PLIP)"
 
 #. Tag: para
 #: random-bits.xml:689
@@ -2257,7 +2237,7 @@ msgid ""
 "card, but with just a remote gateway computer attached via a Null-Modem "
 "cable (also called Null-Printer cable). The gateway computer should be "
 "connected to a network that has a Debian mirror on it (e.g. to the Internet)."
-msgstr ""
+msgstr "Η ενότητα αυτή εξηγεί πώς να εγκαταστήσετε το &debian; σε έναν υπολογιστή χωρίς κάρτα Ethernet, αλλά με έναν απομακρυσμένο υπολογιστή σαν πύλη συνδεδεμένο μέσω ενός καλωδίου Null-Modem (που λέγεται επίσης καλώδιο Null-Printer). Ο υπολογιστής-πύλη θα πρέπει να είναι συνδεδεμένος με ένα δίκτυο που να διαθέτει ένα καθρέφτη του Debian (πχ. στο Διαδίκτυο)."
 
 #. Tag: para
 #: random-bits.xml:697
@@ -2293,7 +2273,7 @@ msgstr ""
 #: random-bits.xml:720
 #, no-c-format
 msgid "Requirements"
-msgstr ""
+msgstr "Απαιτήσεις"
 
 #. Tag: para
 #: random-bits.xml:723
@@ -2301,13 +2281,13 @@ msgstr ""
 msgid ""
 "A target computer, called <emphasis>target</emphasis>, where Debian will be "
 "installed."
-msgstr ""
+msgstr "Ένας υπολογιστής στόχος, που ονομάζεται <emphasis>target</emphasis>, στον οποίον θα εγκατασταθεί το Debian."
 
 #. Tag: para
 #: random-bits.xml:729
 #, no-c-format
 msgid "System installation media; see <xref linkend=\"installation-media\"/>."
-msgstr ""
+msgstr "Μέσα εγκατάστασης; δείτε <xref linkend=\"installation-media\"/>."
 
 #. Tag: para
 #: random-bits.xml:734
@@ -2328,9 +2308,9 @@ msgstr ""
 
 #. Tag: title
 #: random-bits.xml:752
-#, fuzzy, no-c-format
+#, no-c-format
 msgid "Setting up source"
-msgstr "Ρύθμιση του ποντικιού"
+msgstr "Ρύθμιση της πηγής"
 
 #. Tag: para
 #: random-bits.xml:753
@@ -2363,12 +2343,30 @@ msgid ""
 "MASQUERADE\n"
 "echo 1 > /proc/sys/net/ipv4/ip_forward"
 msgstr ""
+"#!/bin/sh\n"
+"\n"
+"# We remove running modules from kernel to avoid conflicts and to\n"
+"# reconfigure them manually.\n"
+"modprobe -r lp parport_pc\n"
+"modprobe parport_pc io=<replaceable>0x378</replaceable> irq=<replaceable>7</"
+"replaceable>\n"
+"modprobe plip\n"
+"\n"
+"# Configure the plip interface (plip0 for me, see dmesg | grep plip)\n"
+"ifconfig <replaceable>plip0 192.168.0.2</replaceable> pointopoint "
+"<replaceable>192.168.0.1</replaceable> netmask 255.255.255.255 up\n"
+"\n"
+"# Configure gateway\n"
+"modprobe iptable_nat\n"
+"iptables -t nat -A POSTROUTING -o <replaceable>ppp0</replaceable> -j "
+"MASQUERADE\n"
+"echo 1 > /proc/sys/net/ipv4/ip_forward"
 
 #. Tag: title
 #: random-bits.xml:764
-#, fuzzy, no-c-format
+#, no-c-format
 msgid "Installing target"
-msgstr "Εγκατάσταση ενός Πυρήνα"
+msgstr "Εγκατάσταση στον στόχο"
 
 #. Tag: para
 #: random-bits.xml:765
@@ -2383,7 +2381,7 @@ msgstr ""
 #: random-bits.xml:777
 #, no-c-format
 msgid "Load installer components"
-msgstr ""
+msgstr "Φόρτωση συστατικών του εγκαταστάτη"
 
 #. Tag: para
 #: random-bits.xml:779
@@ -2397,7 +2395,7 @@ msgstr ""
 #: random-bits.xml:787
 #, no-c-format
 msgid "Detect network hardware"
-msgstr ""
+msgstr "Ανίχνευση υλικού δικτύου"
 
 #. Tag: para
 #: random-bits.xml:792
@@ -2413,7 +2411,7 @@ msgstr ""
 #: random-bits.xml:801
 #, no-c-format
 msgid "Prompt for module parameters: Yes"
-msgstr ""
+msgstr "Προτροπή για παραμέτρους των αρθρωμάτων: Yes"
 
 #. Tag: para
 #: random-bits.xml:806
@@ -2431,31 +2429,32 @@ msgid ""
 "Additional parameters for module parport_pc: "
 "<userinput><replaceable>io=0x378 irq=7</replaceable></userinput>"
 msgstr ""
+"Επιπρόσθετες παράμετροι για το module parport_pc: "
+"<userinput><replaceable>io=0x378 irq=7</replaceable></userinput>"
 
 #. Tag: para
 #: random-bits.xml:819
 #, no-c-format
 msgid "Additional parameters for module plip: leave empty"
-msgstr ""
+msgstr "Επιπρόσθετες παράμετροι για το module plip: αφήστε κενό"
 
 #. Tag: guimenuitem
 #: random-bits.xml:829
-#, fuzzy, no-c-format
+#, no-c-format
 msgid "Configure the network"
-msgstr "Ρύθμιση Δικτύου"
+msgstr "Ρύθμιση Δικτύου "
 
 #. Tag: para
 #: random-bits.xml:832
 #, no-c-format
 msgid "Auto-configure network with DHCP: No"
-msgstr ""
+msgstr "Αυτόματη ρύθμιση του δικτύου με DHCP: No"
 
 #. Tag: para
 #: random-bits.xml:837
 #, no-c-format
-msgid ""
-"IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
-msgstr ""
+msgid "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
+msgstr "IP address: <userinput><replaceable>192.168.0.1</replaceable></userinput>"
 
 #. Tag: para
 #: random-bits.xml:842
@@ -2464,6 +2463,8 @@ msgid ""
 "Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
 "userinput>"
 msgstr ""
+"Point-to-point address: <userinput><replaceable>192.168.0.2</replaceable></"
+"userinput>"
 
 #. Tag: para
 #: random-bits.xml:848
@@ -2473,848 +2474,3 @@ msgid ""
 "<filename>/etc/resolv.conf</filename>)"
 msgstr ""
 
-#, fuzzy
-#~ msgid ""
-#~ "#### Startup.\n"
-#~ "\n"
-#~ "# To use a preseed file, you'll first need to boot the installer,\n"
-#~ "# and tell it what preseed file to use. This is done by passing the\n"
-#~ "# kernel a boot parameter, either manually at boot or by editing the\n"
-#~ "# syslinux.cfg (or similar) file and adding the parameter to the end\n"
-#~ "# of the append line(s) for the kernel.\n"
-#~ "#\n"
-#~ "# If you're netbooting, use this:\n"
-#~ "#   preseed/url=http://host/path/to/preseed\n"
-#~ "# If you're remastering a CD, you could use this:\n"
-#~ "#   preseed/file=/cdrom/preseed\n"
-#~ "# If you're installing from USB media, use this, and put the preseed "
-#~ "file\n"
-#~ "# in the toplevel directory of the USB stick.\n"
-#~ "#   preseed/file=/hd-media/preseed\n"
-#~ "#\n"
-#~ "# If you feel comfortable modifying the installer's initrd image,\n"
-#~ "# you can also place a preseed file in the root directory of the "
-#~ "initrd's\n"
-#~ "# filesystem, named \"preseed.cfg\" -- the installer will always use "
-#~ "this\n"
-#~ "# file if it is present. Otherwise, be sure to copy this file to the "
-#~ "location\n"
-#~ "# you specify.\n"
-#~ "#\n"
-#~ "# To make sure the installer gets the right preseed file, you can "
-#~ "specify\n"
-#~ "# a checksum for the file. Currently this needs to be a md5sum, and if\n"
-#~ "# specified it must match the file or the installer will refuse to use "
-#~ "the\n"
-#~ "# file.\n"
-#~ "#   preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#   preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#\n"
-#~ "# Some parts of the installation process cannot be automated using\n"
-#~ "# some forms of preseeding, because the questions are asked before\n"
-#~ "# the preseed file is loaded. For example, if the preseed file is\n"
-#~ "# downloaded over the network, the network setup must be done first.\n"
-#~ "# One reason to use initrd preseeding is that it allows preseeding\n"
-#~ "# of even these early steps of the installation process.\n"
-#~ "#\n"
-#~ "# If a preseed file cannot be used to preseed some steps, the install "
-#~ "can\n"
-#~ "# still be fully automated, since you can pass preseed values to the "
-#~ "kernel\n"
-#~ "# on the command line. Just pass path/to/var=value for any of the "
-#~ "preseed\n"
-#~ "# variables listed below.\n"
-#~ "#\n"
-#~ "# While you're at it, you may want to throw a debconf/priority=critical "
-#~ "in\n"
-#~ "# there, to avoid most questions even if the preseeding below misses "
-#~ "some.\n"
-#~ "# And you might set the timeout to 1 in syslinux.cfg to avoid needing to "
-#~ "hit\n"
-#~ "# enter to boot the installer.\n"
-#~ "#\n"
-#~ "# Note that the 2.4 kernel accepts a maximum of 8 command line options "
-#~ "and\n"
-#~ "# 8 environment options (including any options added by default for the\n"
-#~ "# installer). If these numbers are exceeded, 2.4 kernels will drop any\n"
-#~ "# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,\n"
-#~ "# you can use 32 command line options and 32 environment options.\n"
-#~ "#\n"
-#~ "# Some of the default options, like 'vga=normal' may be safely removed\n"
-#~ "# for most installations, which may allow you to add more options for\n"
-#~ "# preseeding.\n"
-#~ "\n"
-#~ "# To select your language and country, use this setting, but remember\n"
-#~ "# that this will only work for initrd based preseeding, for other forms "
-#~ "of\n"
-#~ "# preseeding you must convert it into a kernel parameter,\n"
-#~ "# such as debian-installer/locale=en_US\n"
-#~ "d-i debian-installer/locale string en_US\n"
-#~ "\n"
-#~ "# To select your keyboard, use this setting. Again it will need to be\n"
-#~ "# passed as a kernel parameter for most preseed setups.\n"
-#~ "d-i console-keymaps-at/keymap select us\n"
-#~ "\n"
-#~ "#### Network configuration.\n"
-#~ "\n"
-#~ "# Of course, this won't work if you're loading your preseed file from "
-#~ "the\n"
-#~ "# network! But it's great if you're booting from CD or USB stick. You "
-#~ "can\n"
-#~ "# also pass network config parameters in on the kernel params if you are\n"
-#~ "# loading preseed files from the network.\n"
-#~ "\n"
-#~ "# netcfg will choose an interface that has link if possible. This makes "
-#~ "it\n"
-#~ "# skip displaying a list if there is more than one interface.\n"
-#~ "d-i netcfg/choose_interface select auto\n"
-#~ "\n"
-#~ "# If you have a slow dhcp server and the installer times out waiting for\n"
-#~ "# it, this might be useful.\n"
-#~ "#d-i netcfg/dhcp_timeout string 60\n"
-#~ "\n"
-#~ "# If you prefer to configure the network manually, here's how:\n"
-#~ "#d-i netcfg/disable_dhcp boolean true\n"
-#~ "#d-i netcfg/get_nameservers string 192.168.1.1\n"
-#~ "#d-i netcfg/get_ipaddress string 192.168.1.42\n"
-#~ "#d-i netcfg/get_netmask string 255.255.255.0\n"
-#~ "#d-i netcfg/get_gateway string 192.168.1.1\n"
-#~ "#d-i netcfg/confirm_static boolean true\n"
-#~ "\n"
-#~ "# Note that any hostname and domain names assigned from dhcp take\n"
-#~ "# precedence over values set here. However, setting the values still\n"
-#~ "# prevents the questions from being shown even if values come from dhcp.\n"
-#~ "d-i netcfg/get_hostname string unassigned-hostname\n"
-#~ "d-i netcfg/get_domain string unassigned-domain\n"
-#~ "\n"
-#~ "# Disable that annoying WEP key dialog.\n"
-#~ "d-i netcfg/wireless_wep string\n"
-#~ "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
-#~ "#d-i netcfg/dhcp_hostname string radish\n"
-#~ "\n"
-#~ "#### Mirror settings.\n"
-#~ "\n"
-#~ "d-i mirror/country string enter information manually\n"
-#~ "d-i mirror/http/hostname string http.us.debian.org\n"
-#~ "d-i mirror/http/directory string /debian\n"
-#~ "d-i mirror/http/proxy string\n"
-#~ "\n"
-#~ "# What suite of Debian to install.\n"
-#~ "#d-i mirror/suite string testing\n"
-#~ "# What suite of Debian to use for loading installer components.\n"
-#~ "# (Defaults to same as mirror/suite.)\n"
-#~ "#d-i mirror/udeb/suite string testing\n"
-#~ "\n"
-#~ "#### Partitioning.\n"
-#~ "\n"
-#~ "# If the system has free space you can choose to only partition that "
-#~ "space.\n"
-#~ "#d-i partman-auto/init_automatically_partition \\\n"
-#~ "#      select Use the largest continuous free space\n"
-#~ "\n"
-#~ "# Alternatively, you can specify a disk to partition. The device name "
-#~ "can\n"
-#~ "# be given in either devfs or traditional non-devfs format.\n"
-#~ "# For example, to use the first disk devfs knows of:\n"
-#~ "d-i partman-auto/disk string /dev/discs/disc0/disc\n"
-#~ "\n"
-#~ "# You can choose from any of the predefined partitioning recipes:\n"
-#~ "d-i partman-auto/choose_recipe \\\n"
-#~ "       select All files in one partition (recommended for new users)\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home partition\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home, /usr, /var, and /tmp partitions\n"
-#~ "\n"
-#~ "# Or provide a recipe of your own...\n"
-#~ "# The recipe format is documented in the file devel/partman-auto-recipe."
-#~ "txt.\n"
-#~ "# If you have a way to get a recipe file into the d-i environment, you "
-#~ "can\n"
-#~ "# just point at it.\n"
-#~ "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n"
-#~ "\n"
-#~ "# If not, you can put an entire recipe the preseed file in one (logical)\n"
-#~ "# line. This example creates a small /boot partition, suitable swap, and\n"
-#~ "# uses the rest of the space for the root partition:\n"
-#~ "#d-i partman-auto/expert_recipe string                         \\\n"
-#~ "#      boot-root ::                                            \\\n"
-#~ "#              40 50 100 ext3                                  \\\n"
-#~ "#                      $primary{ } $bootable{ }                \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ /boot }                     \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              500 10000 1000000000 ext3                       \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ / }                         \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              64 512 300% linux-swap                          \\\n"
-#~ "#                      method{ swap } format{ }                \\\n"
-#~ "#              .\n"
-#~ "\n"
-#~ "# This makes partman automatically partition without confirmation.\n"
-#~ "d-i partman/confirm_write_new_label boolean true\n"
-#~ "d-i partman/choose_partition \\\n"
-#~ "       select Finish partitioning and write changes to disk\n"
-#~ "d-i partman/confirm boolean true\n"
-#~ "\n"
-#~ "#### Boot loader installation.\n"
-#~ "\n"
-#~ "# Grub is the default boot loader (for x86). If you want lilo installed\n"
-#~ "# instead, uncomment this:\n"
-#~ "#d-i grub-installer/skip boolean true\n"
-#~ "\n"
-#~ "# This is fairly safe to set, it makes grub install automatically to the "
-#~ "MBR\n"
-#~ "# if no other operating system is detected on the machine.\n"
-#~ "d-i grub-installer/only_debian boolean true\n"
-#~ "\n"
-#~ "# This one makes grub-installer install to the MBR if if finds some other "
-#~ "OS\n"
-#~ "# too, which is less safe as it might not be able to boot that other OS.\n"
-#~ "d-i grub-installer/with_other_os boolean true\n"
-#~ "\n"
-#~ "# Alternatively, if you want to install to a location other than the "
-#~ "mbr,\n"
-#~ "# uncomment and edit these lines:\n"
-#~ "#d-i grub-installer/bootdev  string (hd0,0)\n"
-#~ "#d-i grub-installer/only_debian boolean false\n"
-#~ "#d-i grub-installer/with_other_os boolean false\n"
-#~ "\n"
-#~ "#### Finishing up the first stage install.\n"
-#~ "\n"
-#~ "# Avoid that last message about the install being complete.\n"
-#~ "d-i prebaseconfig/reboot_in_progress note\n"
-#~ "\n"
-#~ "# This will prevent the installer from ejecting the CD during the "
-#~ "reboot,\n"
-#~ "# which is useful in some situations.\n"
-#~ "#d-i cdrom-detect/eject boolean false\n"
-#~ "\n"
-#~ "#### Shell commands.\n"
-#~ "\n"
-#~ "# d-i preseeding is inherently not secure. Nothing in the installer "
-#~ "checks\n"
-#~ "# for attempts at buffer overflows or other exploits of the values of a\n"
-#~ "# preseed file like this one. Only use preseed files from trusted\n"
-#~ "# locations! To drive that home, and because it's generally useful, "
-#~ "here's\n"
-#~ "# a way to run any shell command you'd like inside the installer,\n"
-#~ "# automatically.\n"
-#~ "\n"
-#~ "# This first command is run as early as possible, just after\n"
-#~ "# preseeding is read.\n"
-#~ "#d-i preseed/early_command string anna-install some-udeb\n"
-#~ "\n"
-#~ "# This command is run just before the install finishes, but when there "
-#~ "is\n"
-#~ "# still a usable /target directory.\n"
-#~ "#d-i preseed/late_command string echo foo > /target/etc/bar\n"
-#~ "\n"
-#~ "# This command is run just as base-config is starting up.\n"
-#~ "#base-config base-config/early_command string echo hi mom\n"
-#~ "\n"
-#~ "# This command is run after base-config is done, just before the login:\n"
-#~ "# prompt. This is a good way to install a set of packages you want, or "
-#~ "to\n"
-#~ "# tweak the configuration of the system.\n"
-#~ "#base-config base-config/late_command \\\n"
-#~ "#      string apt-get install zsh; chsh -s /bin/zsh\n"
-#~ "\n"
-#~ "###### Preseeding the 2nd stage of the installation.\n"
-#~ "\n"
-#~ "#### Preseeding base-config.\n"
-#~ "\n"
-#~ "# Avoid the introductory message.\n"
-#~ "base-config base-config/intro note\n"
-#~ "\n"
-#~ "# Avoid the final message.\n"
-#~ "base-config base-config/login note\n"
-#~ "\n"
-#~ "# If you installed a display manager, but don't want to start it "
-#~ "immediately\n"
-#~ "# after base-config finishes.\n"
-#~ "#base-config base-config/start-display-manager boolean false\n"
-#~ "\n"
-#~ "# Some versions of the installer can report back on what you've "
-#~ "installed.\n"
-#~ "# The default is not to report back, but sending reports helps the "
-#~ "project\n"
-#~ "# determine what software is most popular and include it on CDs.\n"
-#~ "#popularity-contest popularity-contest/participate boolean false\n"
-#~ "\n"
-#~ "#### Clock and time zone setup.\n"
-#~ "\n"
-#~ "# Controls whether or not the hardware clock is set to UTC.\n"
-#~ "d-i clock-setup/utc boolean true\n"
-#~ "\n"
-#~ "# You may set this to any valid setting for $TZ; see the contents of\n"
-#~ "# /usr/share/zoneinfo/ for options.\n"
-#~ "d-i time/zone string US/Eastern\n"
-#~ "\n"
-#~ "#### Account setup.\n"
-#~ "\n"
-#~ "# To preseed the root password, you have to put it in the clear in this\n"
-#~ "# file. That is not a very good idea, use caution!\n"
-#~ "#passwd passwd/root-password password r00tme\n"
-#~ "#passwd passwd/root-password-again password r00tme\n"
-#~ "\n"
-#~ "# If you want to skip creation of a normal user account.\n"
-#~ "#passwd passwd/make-user boolean false\n"
-#~ "\n"
-#~ "# Alternatively, you can preseed the user's name and login.\n"
-#~ "#passwd passwd/user-fullname string Debian User\n"
-#~ "#passwd passwd/username string debian\n"
-#~ "# And their password, but use caution!\n"
-#~ "#passwd passwd/user-password password insecure\n"
-#~ "#passwd passwd/user-password-again password insecure\n"
-#~ "\n"
-#~ "#### Apt setup.\n"
-#~ "\n"
-#~ "# This question controls what source the second stage installation uses\n"
-#~ "# for packages. Choices are cdrom, http, ftp, filesystem, edit sources "
-#~ "list\n"
-#~ "# by hand\n"
-#~ "base-config apt-setup/uri_type select http\n"
-#~ "\n"
-#~ "# If you choose ftp or http, you'll be asked for a country and a mirror.\n"
-#~ "base-config apt-setup/country select enter information manually\n"
-#~ "base-config apt-setup/hostname string http.us.debian.org\n"
-#~ "base-config apt-setup/directory string /debian\n"
-#~ "# Stop after choosing one mirror.\n"
-#~ "base-config apt-setup/another boolean false\n"
-#~ "\n"
-#~ "# You can choose to install non-free and contrib software.\n"
-#~ "#base-config apt-setup/non-free boolean true\n"
-#~ "#base-config apt-setup/contrib boolean true\n"
-#~ "\n"
-#~ "# Do enable security updates.\n"
-#~ "base-config apt-setup/security-updates boolean true\n"
-#~ "\n"
-#~ "#### Package selection.\n"
-#~ "\n"
-#~ "# You can choose to install any combination of tasks that are available.\n"
-#~ "# Available tasks as of this writing include: Desktop environment,\n"
-#~ "# Web server, Print server, DNS server, File server, Mail server,\n"
-#~ "# SQL database, Laptop, Standard system, manual package selection. The\n"
-#~ "# last of those will run aptitude. You can also choose to install no\n"
-#~ "# tasks, and force the installation of a set of packages in some other\n"
-#~ "# way. We recommend always including the Standard system task.\n"
-#~ "tasksel tasksel/first multiselect Desktop environment, Standard system\n"
-#~ "#tasksel tasksel/first multiselect Web server, Standard system\n"
-#~ "\n"
-#~ "#### Mailer configuration.\n"
-#~ "\n"
-#~ "# During a normal install, exim asks only a few questions. Here's how to\n"
-#~ "# avoid even those. More complicated preseeding is possible.\n"
-#~ "exim4-config exim4/dc_eximconfig_configtype \\\n"
-#~ "       select no configuration at this time\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "\n"
-#~ "# It's a good idea to set this to whatever user account you choose to\n"
-#~ "# create. Leaving the value blank results in postmaster mail going to\n"
-#~ "# /var/mail/mail.\n"
-#~ "exim4-config exim4/dc_postmaster string\n"
-#~ "\n"
-#~ "#### X Configuration.\n"
-#~ "\n"
-#~ "# Preseeding Debian's X config is possible, but you probably need to "
-#~ "know\n"
-#~ "# some details about the video hardware of the machine, since Debian's X\n"
-#~ "# configurator does not do fully automatic configuration of everything.\n"
-#~ "\n"
-#~ "# X can detect the right driver for some cards, but if you're "
-#~ "preseeding,\n"
-#~ "# you override whatever it chooses. Still, vesa will work most places.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/device/driver select vesa\n"
-#~ "\n"
-#~ "# A caveat with mouse autodetection is that if it fails, X will retry it\n"
-#~ "# over and over. So if it's preseeded to be done, there is a possibility "
-#~ "of\n"
-#~ "# an infinite loop if the mouse is not autodetected.\n"
-#~ "#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true\n"
-#~ "\n"
-#~ "# Monitor autodetection is recommended.\n"
-#~ "xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true\n"
-#~ "# Uncomment if you have an LCD display.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true\n"
-#~ "# X has three configuration paths for the monitor. Here's how to preseed\n"
-#~ "# the \"medium\" path, which is always available. The \"simple\" path may "
-#~ "not\n"
-#~ "# be available, and the \"advanced\" path asks too many questions.\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/selection-method \\\n"
-#~ "       select medium\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/mode-list \\\n"
-#~ "       select 1024x768 @ 60 Hz\n"
-#~ "\n"
-#~ "#### Everything else.\n"
-#~ "\n"
-#~ "# Depending on what software you choose to install, or if things go "
-#~ "wrong\n"
-#~ "# during the installation process, it's possible that other questions "
-#~ "may\n"
-#~ "# be asked. You can preseed those too, of course. To get a list of every\n"
-#~ "# possible question that could be asked during an install, do an\n"
-#~ "# installation, and then run these commands:\n"
-#~ "#   debconf-get-selections --installer > file\n"
-#~ "#   debconf-get-selections >> file\n"
-#~ "\n"
-#~ "# If you like, you can include other preseed files into this one.\n"
-#~ "# Any settings in those files will override pre-existing settings from "
-#~ "this\n"
-#~ "# file. More that one file can be listed, separated by spaces; all will "
-#~ "be\n"
-#~ "# loaded. The included files can have preseed/include directives of "
-#~ "their\n"
-#~ "# own as well. Note that if the filenames are relative, they are taken "
-#~ "from\n"
-#~ "# the same directory as the preseed file that includes them.\n"
-#~ "#d-i preseed/include string x.cfg\n"
-#~ "\n"
-#~ "# The installer can optionally verify checksums of preseed files before\n"
-#~ "# using them. Currently only md5sums are supported, list the md5sums\n"
-#~ "# in the same order as the list of files to include.\n"
-#~ "#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n"
-#~ "\n"
-#~ "# More flexibly, this runs a shell command and if it outputs the names "
-#~ "of\n"
-#~ "# preseed files, includes those files. \n"
-#~ "#d-i preseed/include_command \\\n"
-#~ "#      string echo if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n"
-#~ "\n"
-#~ "# To check the format of your preseed file before performing an install,\n"
-#~ "# you can use debconf-set-selections:\n"
-#~ "#   debconf-set-selections -c preseed.cfg"
-#~ msgstr ""
-#~ "#### Modifying syslinux.cfg.\n"
-#~ "\n"
-#~ "# Edit the syslinux.cfg (or similar) file, and add parameters to the end\n"
-#~ "# of the append line(s) for the kernel.\n"
-#~ "#\n"
-#~ "# You'll at least want to add a parameter telling the installer where to\n"
-#~ "# get its preseed file from.\n"
-#~ "# If you're installing from USB media, use this, and put the preseed "
-#~ "file\n"
-#~ "# in the toplevel directory of the USB stick.\n"
-#~ "#   preseed/file=/hd-media/preseed\n"
-#~ "# If you're netbooting, use this instead:\n"
-#~ "#   preseed/url=http://host/path/to/preseed\n"
-#~ "# If you're remastering a CD, you could use this:\n"
-#~ "#   preseed/file=/cdrom/preseed\n"
-#~ "# Be sure to copy this file to the location you specify.\n"
-#~ "#\n"
-#~ "  # To make sure the installer gets the right preseed file, you can "
-#~ "specify\n"
-#~ "# a checksum for the file. Currently this needs to be a md5sum, and if\n"
-#~ "# specified it must match the file or the installer will refuse to use "
-#~ "the\n"
-#~ "# file. (Checksums are not supported in the sarge installer.)\n"
-#~ "#   preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#   preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#\n"
-#~ "# While you're at it, you may want to throw a debconf/priority=critical "
-#~ "in\n"
-#~ "# there, to avoid most questions even if the preseeding below misses "
-#~ "some.\n"
-#~ "# And you might set the timeout to 1 in syslinux.cfg to avoid needing to "
-#~ "hit\n"
-#~ "# enter to boot the installer.\n"
-#~ "#\n"
-#~ "# Language, country, and keyboard selection cannot be preseeded from a "
-#~ "file,\n"
-#~ "# because the questions are asked before the preseed file can be loaded.\n"
-#~ "# Instead, to avoid these questions, pass some more parameters to the "
-#~ "kernel.\n"
-#~ "# If you are using the sarge installer, you need three:\n"
-#~ "#\n"
-#~ "#    languagechooser/language-name=English\n"
-#~ "#    countrychooser/shortlist=US\n"
-#~ "#    console-keymaps-at/keymap=us\n"
-#~ "#\n"
-#~ "# Newer versions of the installer need only two:\n"
-#~ "#\n"
-#~ "#    debian-installer/locale=en_US\n"
-#~ "#    console-keymaps-at/keymap=us\n"
-#~ "#\n"
-#~ "# Note that the kernel accepts a maximum of 8 command line options and\n"
-#~ "# 8 environment options (including any options added by default for the\n"
-#~ "# installer). If these numbers are exceeded, 2.4 kernels will drop any\n"
-#~ "# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,\n"
-#~ "# you can use 32 command line options and 32 environment options.\n"
-#~ "#\n"
-#~ "# Some of the default options, like 'vga=normal' may be safely removed\n"
-#~ "# for most installations, which may allow you to add more options for\n"
-#~ "# preseeding.\n"
-#~ "\n"
-#~ "#### Shell commands.\n"
-#~ "\n"
-#~ "# d-i preseeding is inherently not secure. Nothing in the installer "
-#~ "checks\n"
-#~ "# for attempts at buffer overflows or other exploits of the values of a\n"
-#~ "# preseed file like this one. Only use preseed files from trusted\n"
-#~ "# locations! To drive that home, and because it's generally useful, "
-#~ "here's\n"
-#~ "# a way to run any shell command you'd like inside the installer,\n"
-#~ "# automatically.\n"
-#~ "\n"
-#~ "# This first command is run as early as possible, just after\n"
-#~ "# preseeding is read.\n"
-#~ "#d-i preseed/early_command              string \\\n"
-#~ "#    wget http://url/to/my.udeb -O /tmp/my.udeb; udpkg -i /tmp/my.udeb\n"
-#~ "\n"
-#~ "# This command is run just before the install finishes, but when there "
-#~ "is\n"
-#~ "# still a usable /target directory.\n"
-#~ "#d-i preseed/late_command               string \\\n"
-#~ "#    for deb in /hd-media/*.deb; do cp $deb /target/tmp; \\\n"
-#~ "#    chroot /target dpkg -i /tmp/$(basename $deb); done\n"
-#~ "\n"
-#~ "# This command is run just as base-config is starting up.\n"
-#~ "#base-config base-config/early_command  string echo hi mom\n"
-#~ "\n"
-#~ "# This command is run after base-config is done, just before the login:\n"
-#~ "# prompt. This is a good way to install a set of packages you want, or "
-#~ "to\n"
-#~ "# tweak the configuration of the system.\n"
-#~ "#base-config base-config/late_command   string \\\n"
-#~ "#    apt-get install zsh; chsh -s /bin/zsh\n"
-#~ "\n"
-#~ "#### Network configuration.\n"
-#~ "\n"
-#~ "# Of course, this won't work if you're loading your preseed file from "
-#~ "the\n"
-#~ "# network! But it's great if you're booting from CD or USB stick. You "
-#~ "can\n"
-#~ "# also pass network config parameters in on the kernel params if you are\n"
-#~ "# loading preseed files from the network.\n"
-#~ "\n"
-#~ "# netcfg will choose an interface that has link if possible. This makes "
-#~ "it\n"
-#~ "# skip displaying a list if there is more than one interface.\n"
-#~ "d-i  netcfg/choose_interface            select auto\n"
-#~ "\n"
-#~ "# If you prefer to configure the network manually, here's how:\n"
-#~ "#d-i netcfg/disable_dhcp                boolean true\n"
-#~ "#d-i netcfg/get_nameservers             string 192.168.1.1\n"
-#~ "#d-i netcfg/get_ipaddress               string 192.168.1.42\n"
-#~ "#d-i netcfg/get_netmask                 string 255.255.255.0\n"
-#~ "#d-i netcfg/get_gateway                 string 192.168.1.1\n"
-#~ "#d-i netcfg/confirm_static              boolean true\n"
-#~ "\n"
-#~ "# Note that any hostname and domain names assigned from dhcp take\n"
-#~ "# precedence over values set here. However, setting the values still\n"
-#~ "# prevents the questions from being shown even if values come from dhcp.\n"
-#~ "d-i  netcfg/get_hostname                string unassigned-hostname\n"
-#~ "d-i  netcfg/get_domain                  string unassigned-domain\n"
-#~ "\n"
-#~ "# Disable that annoying WEP key dialog.\n"
-#~ "d-i  netcfg/wireless_wep                string\n"
-#~ "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
-#~ "#d-i netcfg/dhcp_hostname               string radish\n"
-#~ "\n"
-#~ "#### Mirror settings.\n"
-#~ "\n"
-#~ "d-i  mirror/country                     string enter information "
-#~ "manually\n"
-#~ "d-i  mirror/http/hostname               string http.us.debian.org\n"
-#~ "d-i  mirror/http/directory              string /debian\n"
-#~ "d-i  mirror/suite                       string testing\n"
-#~ "d-i  mirror/http/proxy                  string\n"
-#~ "\n"
-#~ "### Partitioning.\n"
-#~ "\n"
-#~ "# If the system has free space you can choose to only partition that "
-#~ "space.\n"
-#~ "#d-i partman-auto/init_automatically_partition \\\n"
-#~ "#    select Use the largest continuous free space\n"
-#~ "\n"
-#~ "# Alternatively, you can specify a disk to partition. The device name "
-#~ "can\n"
-#~ "# be given in either devfs or traditional non-devfs format.\n"
-#~ "# For example, to use the first disk devfs knows of:\n"
-#~ "d-i  partman-auto/disk                  string /dev/discs/disc0/disc\n"
-#~ "\n"
-#~ "# You can choose from any of the predefined partitioning recipes:\n"
-#~ "d-i  partman-auto/choose_recipe         select \\\n"
-#~ "     All files in one partition (recommended for new users)\n"
-#~ "#d-i partman-auto/choose_recipe         select Desktop machine\n"
-#~ "#d-i partman-auto/choose_recipe         select Multi-user workstation\n"
-#~ "\n"
-#~ "# Or provide a recipe of your own...\n"
-#~ "# The recipe format is documented in the file devel/partman-auto-recipe."
-#~ "txt.\n"
-#~ "# If you have a way to get a recipe file into the d-i environment, you "
-#~ "can\n"
-#~ "# just point at it.\n"
-#~ "#d-i partman-auto/expert_recipe_file    string /hd-media/recipe\n"
-#~ "\n"
-#~ "# If not, you can put an entire recipe in one line. This example creates\n"
-#~ "# a small /boot partition, suitable swap, and uses the rest of the space\n"
-#~ "# for the root partition:\n"
-#~ "#d-i partman-auto/expert_recipe         string boot-root :: \\\n"
-#~ "#    20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } "
-#~ "\\\n"
-#~ "#    use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . \\\n"
-#~ "#    500 10000 1000000000 ext3 method{ format } format{ } \\\n"
-#~ "#    use_filesystem{ } filesystem{ ext3 } mountpoint{ / } . \\\n"
-#~ "#    64 512 300% linux-swap method{ swap } format{ } .\n"
-#~ "# For reference, here is that same recipe in a more readable form:\n"
-#~ "#    boot-root ::\n"
-#~ "#       40 50 100 ext3\n"
-#~ "#          $primary{ } $bootable{ }\n"
-#~ "#          method{ format } format{ }\n"
-#~ "#          use_filesystem{ } filesystem{ ext3 }\n"
-#~ "#          mountpoint{ /boot }\n"
-#~ "#       .\n"
-#~ "#       500 10000 1000000000 ext3\n"
-#~ "#          method{ format } format{ }\n"
-#~ "#          use_filesystem{ } filesystem{ ext3 }\n"
-#~ "#          mountpoint{ / }\n"
-#~ "#       .\n"
-#~ "#       64 512 300% linux-swap\n"
-#~ "#          method{ swap } format{ }\n"
-#~ "#       .\n"
-#~ "\n"
-#~ "# This makes partman automatically partition without confirmation.\n"
-#~ "d-i partman/confirm_write_new_label     boolean true\n"
-#~ "d-i partman/choose_partition            select \\\n"
-#~ "    Finish partitioning and write changes to disk\n"
-#~ "d-i partman/confirm                     boolean true\n"
-#~ "\n"
-#~ "#### Boot loader installation.\n"
-#~ "\n"
-#~ "# Grub is the default boot loader (for x86). If you want lilo installed\n"
-#~ "# instead, uncomment this:\n"
-#~ "#d-i grub-installer/skip                boolean true\n"
-#~ "\n"
-#~ "# This is fairly safe to set, it makes grub install automatically to the "
-#~ "MBR\n"
-#~ "# if no other operating system is detected on the machine.\n"
-#~ "d-i  grub-installer/only_debian         boolean true\n"
-#~ "\n"
-#~ "# This one makes grub-installer install to the MBR if if finds some other "
-#~ "OS\n"
-#~ "# too, which is less safe as it might not be able to boot that other OS.\n"
-#~ "d-i  grub-installer/with_other_os       boolean true\n"
-#~ "\n"
-#~ "# Alternatively, if you want to install to a location other than the "
-#~ "mbr,\n"
-#~ "# uncomment and edit these lines:\n"
-#~ "#d-i grub-installer/bootdev             string (hd0,0)\n"
-#~ "#d-i grub-installer/only_debian         boolean false\n"
-#~ "#d-i grub-installer/with_other_os       boolean false\n"
-#~ "\n"
-#~ "##### Finishing up the first stage install.\n"
-#~ "\n"
-#~ "# Avoid that last message about the install being complete.\n"
-#~ "d-i  prebaseconfig/reboot_in_progress   note\n"
-#~ "\n"
-#~ "\n"
-#~ "##### Preseeding base-config.\n"
-#~ "\n"
-#~ "# Avoid the introductory message.\n"
-#~ "base-config  base-config/intro          note\n"
-#~ "\n"
-#~ "# Avoid the final message.\n"
-#~ "base-config  base-config/login          note\n"
-#~ "\n"
-#~ "# If you installed a display manager, but don't want to start it "
-#~ "immediately\n"
-#~ "# after base-config finishes.\n"
-#~ "#base-config base-config/start-display-manager        boolean false\n"
-#~ "\n"
-#~ "###### Time zone setup.\n"
-#~ "\n"
-#~ "# Controls whether or not the hardware clock is set to GMT.\n"
-#~ "base-config  tzconfig/gmt                             boolean true\n"
-#~ "\n"
-#~ "# Simple timezone preseeding. You may set this to any valid setting for "
-#~ "$TZ;\n"
-#~ "# see the contents of /usr/share/zoneinfo/ for options.\n"
-#~ "base-config  tzconfig/preseed_zone                    string US/Eastern\n"
-#~ "\n"
-#~ "# Timezone preseeding used to be more complex; the old method is "
-#~ "documented\n"
-#~ "# here as well for completeness. If you're using sarge, you'll need this\n"
-#~ "# method.\n"
-#~ "\n"
-#~ "# If you told the installer that you're in the United States, then you\n"
-#~ "# can set the time zone using this variable.\n"
-#~ "# (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii,\n"
-#~ "# Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, "
-#~ "other)\n"
-#~ "#base-config tzconfig/choose_country_zone/US          select Eastern\n"
-#~ "# If you told it you're in Canada.\n"
-#~ "# (Choices are: Newfoundland, Atlantic, Eastern, Central,\n"
-#~ "# East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other)\n"
-#~ "#base-config tzconfig/choose_country_zone/CA          select Eastern\n"
-#~ "# If you told it you're in Brazil. (Choices are: East, West, Acre,\n"
-#~ "# DeNoronha, other)\n"
-#~ "#base-config tzconfig/choose_country_zone/BR          select East\n"
-#~ "# Many countries have only one time zone. If you told the installer "
-#~ "you're\n"
-#~ "# in one of those countries, you can choose its standard time zone via "
-#~ "this\n"
-#~ "# question.\n"
-#~ "#base-config tzconfig/choose_country_zone_single      boolean true\n"
-#~ "# This question is asked as a fallback for countries other than those\n"
-#~ "# listed above, which have more than one time zone. You can preseed one "
-#~ "of\n"
-#~ "# the time zones, or \"other\".\n"
-#~ "#base-config tzconfig/choose_country_zone_multiple    select\n"
-#~ "\n"
-#~ "###### Account setup.\n"
-#~ "\n"
-#~ "# To preseed the root password, you have to put it in the clear in this\n"
-#~ "# file. That is not a very good idea, use caution!\n"
-#~ "#passwd passwd/root-password            password r00tme\n"
-#~ "#passwd passwd/root-password-again      password r00tme\n"
-#~ "\n"
-#~ "# If you want to skip creation of a normal user account.\n"
-#~ "#passwd passwd/make-user                boolean false\n"
-#~ "\n"
-#~ "# Alternatively, you can preseed the user's name and login.\n"
-#~ "#passwd passwd/user-fullname            string Debian User\n"
-#~ "#passwd passwd/username                 string debian\n"
-#~ "# And their password, but use caution!\n"
-#~ "#passwd passwd/user-password            password insecure\n"
-#~ "#passwd passwd/user-password-again      password insecure\n"
-#~ "\n"
-#~ "###### Apt setup.\n"
-#~ "\n"
-#~ "# This question controls what source the second stage installation uses\n"
-#~ "# for packages. Choices are cdrom, http, ftp, filesystem, edit sources "
-#~ "list\n"
-#~ "# by hand\n"
-#~ "base-config  apt-setup/uri_type         select http\n"
-#~ "\n"
-#~ "# If you choose ftp or http, you'll be asked for a country and a mirror.\n"
-#~ "base-config  apt-setup/country          select enter information "
-#~ "manually\n"
-#~ "base-config  apt-setup/hostname         string http.us.debian.org\n"
-#~ "base-config  apt-setup/directory        string /debian\n"
-#~ "# Stop after choosing one mirror.\n"
-#~ "base-config  apt-setup/another          boolean false\n"
-#~ "\n"
-#~ "# You can choose to install non-free and contrib software.\n"
-#~ "#base-config apt-setup/non-free         boolean true\n"
-#~ "#base-config apt-setup/contrib          boolean true\n"
-#~ "\n"
-#~ "# Do enable security updates.\n"
-#~ "base-config  apt-setup/security-updates boolean true\n"
-#~ "\n"
-#~ "###### Package selection.\n"
-#~ "\n"
-#~ "# You can choose to install any combination of tasks that are available.\n"
-#~ "# Available tasks as of this writing include: Desktop environment,\n"
-#~ "# Web server, Print server, DNS server, File server, Mail server,\n"
-#~ "# SQL database, manual package selection. The last of those will run\n"
-#~ "# aptitude. You can also choose to install no tasks, and force the\n"
-#~ "# installation of a set of packages in some other way.\n"
-#~ "tasksel      tasksel/first   multiselect Desktop environment\n"
-#~ "#tasksel     tasksel/first   multiselect Web server, Mail server, DNS "
-#~ "server\n"
-#~ "\n"
-#~ "###### Mailer configuration.\n"
-#~ "\n"
-#~ "# During a normal install, exim asks only two questions. Here's how to\n"
-#~ "# avoid even those. More complicated preseeding is possible.\n"
-#~ "exim4-config exim4/dc_eximconfig_configtype \\\n"
-#~ "    select no configuration at this time\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "\n"
-#~ "# It's a good idea to set this to whatever user account you choose to\n"
-#~ "# create. Leaving the value blank results in postmaster mail going to\n"
-#~ "# /var/mail/mail.\n"
-#~ "exim4-config exim4/dc_postmaster        string\n"
-#~ "\n"
-#~ "###### X Configuration.\n"
-#~ "\n"
-#~ "# Preseeding Debian's X config is possible, but you probably need to "
-#~ "know\n"
-#~ "# some details about the video hardware of the machine, since Debian's X\n"
-#~ "# configurator does not do fully automatic configuration of everything.\n"
-#~ "\n"
-#~ "# X can detect the right driver for some cards, but if you're "
-#~ "preseeding,\n"
-#~ "# you override whatever it chooses. Still, vesa will work most places.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/device/driver select vesa\n"
-#~ "\n"
-#~ "# A caveat with mouse autodetection is that if it fails, X will retry it\n"
-#~ "# over and over. So if it's preseeded to be done, there is a possibility "
-#~ "of\n"
-#~ "# an infinite loop if the mouse is not autodetected.\n"
-#~ "#xserver-xfree86 xserver-xfree86/autodetect_mouse     boolean true\n"
-#~ "\n"
-#~ "# Monitor autodetection is recommended.\n"
-#~ "xserver-xfree86 xserver-xfree86/autodetect_monitor    boolean true\n"
-#~ "# Uncomment if you have an LCD display.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/monitor/lcd   boolean true\n"
-#~ "# X has three configuration paths for the monitor. Here's how to preseed\n"
-#~ "# the \"medium\" path, which is always available. The \"simple\" path may "
-#~ "not\n"
-#~ "# be available, and the \"advanced\" path asks too many questions.\n"
-#~ "xserver-xfree86  xserver-xfree86/config/monitor/selection-method \\\n"
-#~ "    select medium\n"
-#~ "xserver-xfree86  xserver-xfree86/config/monitor/mode-list \\\n"
-#~ "    select 1024x768 @ 60 Hz\n"
-#~ "\n"
-#~ "###### Everything else.\n"
-#~ "\n"
-#~ "# Depending on what software you choose to install, or if things go "
-#~ "wrong\n"
-#~ "# during the installation process, it's possible that other questions "
-#~ "may\n"
-#~ "# be asked. You can preseed those too, of course. To get a list of every\n"
-#~ "# possible question that could be asked during an install, do an\n"
-#~ "# installation, and then run these commands:\n"
-#~ "#   debconf-get-selections --installer > file\n"
-#~ "#   debconf-get-selections >> file\n"
-#~ "\n"
-#~ "# If you like, you can include other preseed files into this one.\n"
-#~ "# Any settings in those files will override pre-existing settings from "
-#~ "this\n"
-#~ "# file. More that one file can be listed, separated by spaces; all will "
-#~ "be\n"
-#~ "# loaded. The included files can have preseed/include directives of "
-#~ "their\n"
-#~ "# own as well. Note that if the filenames are relative, they are taken "
-#~ "from\n"
-#~ "# the same directory as the preseed file that includes them.\n"
-#~ "#d-i preseed/include                    string x.cfg\n"
-#~ "\n"
-#~ "# The installer can optionally verify checksums of preseed files before\n"
-#~ "# using them. Currently only md5sums are supported, list the md5sums\n"
-#~ "# in the same order as the list of files to include.\n"
-#~ "# (Checksums are not supported in the sarge installer.)\n"
-#~ "#d-i pressed/include/checksum                string "
-#~ "5da499872becccfeda2c4872f9171c3d\n"
-#~ "\n"
-#~ "# More flexibly, this runs a shell command and if it outputs the names "
-#~ "of\n"
-#~ "# preseed files, includes those files. For example, to switch configs "
-#~ "based\n"
-#~ "# on a particular usb storage device (in this case, a built-in card "
-#~ "reader):\n"
-#~ "#d-i preseed/include_command            string \\\n"
-#~ "#    if $(grep -q \"GUID: 0aec3050aec305000001a003\" /proc/scsi/usb-"
-#~ "storage-*/*); \\\n"
-#~ "#    then echo kraken.cfg; else echo otherusb.cfg; fi\n"
-#~ "\n"
-#~ "# To check the format of your preseed file before performing an install,\n"
-#~ "# you can use debconf-set-selections:\n"
-#~ "#   debconf-set-selections -c preseed.cfg"
-
-#, fuzzy
-#~ msgid ""
-#~ "A <quote>clean</quote> example file is available from &urlset-example-"
-#~ "preseed;<phrase condition=\"for_cd\"> or from the Internet at <ulink url="
-#~ "\"&url-release-area;example-preseed.txt\"></ulink></phrase>."
-#~ msgstr ""
-#~ "Ένα <quote>καθαρό</quote>παράδειγμα αρχείου περιλαμβάνεται στα επίσημα CD "
-#~ "εγκατάστασης του Debian στον κατάλογο <filename>/doc/install/manual</"
-#~ "filename> και είναι διαθέσιμο από το Διαδίκτυο στο <ulink url=\"&url-"
-#~ "example-preseed;\"></ulink>."