diff options
author | Jeroen Schot <schot@a-eskwadraat.nl> | 2012-08-29 15:10:27 +0000 |
---|---|---|
committer | Jeroen Schot <schot@a-eskwadraat.nl> | 2012-08-29 15:10:27 +0000 |
commit | a292182f917a4104b223016e041410498f4d47a3 (patch) | |
tree | 31983bd3bb12e47ca30a949da0d472b93796a9ea /nl/using-d-i | |
parent | f842e23756734b3ce4932695707bc416810e46cc (diff) | |
download | installation-guide-a292182f917a4104b223016e041410498f4d47a3.zip |
Restart Dutch translation of D-I manual in PO format.
Diffstat (limited to 'nl/using-d-i')
45 files changed, 0 insertions, 2916 deletions
diff --git a/nl/using-d-i/components.xml b/nl/using-d-i/components.xml deleted file mode 100644 index 560ca939a..000000000 --- a/nl/using-d-i/components.xml +++ /dev/null @@ -1,192 +0,0 @@ -<!-- original version: 61147 --> - - <sect1 id="module-details"> - <title>Individuele modules gebruiken</title> -<para> - -In deze sectie beschrijven we elke module van het installatiesysteem -in detail. De modules zijn gegroepeerd in stadia die herkenbaar -zouden moeten zijn voor gebruikers. Ze worden gepresenteerd in de -volgorde waarin ze tijdens de installatie verschijnen. Merk op dat -mogelijk niet alle modules voor elke installatie worden gebruikt; welke -modules daadwerkelijk worden gebruikt is afhankelijk van de door u -gekozen installatiemethode en van uw apparatuur. - -</para> - - <sect2 id="di-setup"> - <title>Instelling van het installatiesysteem en hardware configuratie</title> -<para> - -Laten we er vanuit gaan dat uw systeem met het &debian; installatiesysteem is -opgestart en dat u het eerste scherm voor u heeft. Op dat moment is de -functionaliteit van &d-i; nog vrij beperkt. Het weet nog niet veel over uw -apparatuur, welke taal u prefereert en zelfs de taken die het moet uitvoeren. -Maak u geen zorgen. &d-i; is slim genoeg om uw apparatuur te scannen, de nog -ontbrekende modules te localiseren en zichzelf op te waarderen tot een -volwaardig installatiesysteem. - -U zult echter &d-i; nog altijd moeten helpen met enige informatie die het niet -automatisch kan bepalen (zoals de selectie van de taal en toetsenbordindeling -die u verkiest of van de gewenste spiegelserver). - -</para><para> - -U zult merken dat &d-i; verschillende keren tijdens dit stadium een -<firstterm>hardwareherkenning</firstterm> uitvoert. De eerste keer is dit -specifiek gericht op de apparatuur (bijvoorbeeld uw CD-speler of netwerkkaart) -die nodig is voor het laden van de benodigde modules van het installatiesysteem. -Omdat bij deze eerste keer mogelijk nog niet alle stuurprogramma's beschikbaar -zijn, moet de hardwareherkenning later in het proces worden herhaald. - -</para><para arch="not-s390"> -Tijdens de hardwareherkenning zal &d-i; nagaan of er onder de stuurprogramma's -benodigd voor uw hardware gevallen zijn waarvoor firmware geladen moet worden. -Als er stuurprogramma's zijn die firmware proberen te laden, maar waarbij deze -niet beschikbaar is, zal een dialoog getoond worden die de mogelijkheid biedt -de ontbrekende firmware vanaf een verwisselbaar medium te laden. -Zie <xref linkend="loading-firmware"/> voor nadere details. - -</para> - -&module-lowmem.xml; -&module-localechooser.xml; -&module-kbd-chooser.xml; -&module-s390-netdevice.xml; -&module-ddetect.xml; -&module-cdrom-detect.xml; -&module-iso-scan.xml; -&module-anna.xml; -&module-netcfg.xml; -&module-choose-mirror.xml; -<!-- tzsetup is included in clock-setup --> -&module-clock-setup.xml; - - </sect2> - - <sect2 id="di-partition"> - <title>Schijfindeling en selectie van aanhechtpunten</title> -<para> - -Op dit punt, nadat voor de laatste keer hardwareherkenning heeft plaatsgevonden, -heeft &d-i; zijn volledige sterkte bereikt: aangepast aan de behoeften van de -gebruiker en klaar voor het echte werk. - -Zoals de titel van deze sectie aangeeft, is de voornaamste taak van de volgende -modules het indelen van uw harde schijven, het creëren van bestandssystemen en -het toekennen van aanhechtpunten. Optioneel kunnen nauw gerelateerde zaken als -RAID, LVM of versleutelde partities worden geconfigureerd. - -</para> - -&module-s390-dasd.xml; -&module-partman.xml; -&module-autopartkit.xml; -&module-partitioner.xml; -&module-partconf.xml; -&module-mdcfg.xml; -&module-partman-lvm.xml; -&module-partman-crypto.xml; - </sect2> - - <sect2 id="di-install-base"> - <title>Installatie van het Basissysteem</title> -<para> - -Hoewel dit stadium het minst problematisch is, beslaat het wel een significant -deel van de tijd van de installatie omdat hier het volledige basissysteem wordt -opgehaald, geverifieerd en uitgepakt. Als u een langzame computer of -netwerkverbinding heeft, kan dit enige tijd in beslag nemen. - -</para> - -&module-base-installer.xml; - </sect2> - - <sect2 id="di-user-setup"> - <title>Gebruikers en wachtwoorden instellen</title> -<para> - -Nadat het basissysteem is geïnstalleerd, zal het installatiesysteem u in -staat stellen om het <quote>root</quote> account en/of een account voor de -eerste gebruiker in te stellen. Accounts voor andere gebruikers kunnen worden -aangemaakt nadat de installatie is afgerond. - -</para> - -&module-user-setup.xml; - </sect2> - - <sect2 id="di-install-software"> - <title>Aanvullende software installeren</title> -<para> - -Op dit punt beschikt u over een bruikbaar systeem, maar met beperkte -functionaliteit. De meeste gebruikers zullen aanvullende -programmatuur op het systeem willen installeren om het aan te passen aan hun -behoeften. Het installatiesysteem maakt dit mogelijk. Deze stap kan, zeker -indien u een langzame computer of netwerkverbinding heeft, nog meer tijd in -beslag nemen dan de installatie van het basissysteem. - -</para> - -&module-apt-setup.xml; -&module-pkgsel.xml; - </sect2> - - <sect2 id="di-make-bootable"> - <title>Zorgen dat uw systeem kan worden opgestart</title> -<para condition="supports-nfsroot"> - -Als u een werkstation zonder schijfeenheden installeert, is opstarten vanaf -een locale schijfeenheid uiteraard geen optie en zal deze stap worden -overgeslagen. <phrase arch="sparc">Desgewenst kunt u OpenBoot instellen om -standaard vanaf het netwerk op te starten; zie <xref -linkend="boot-dev-select-sun"/>.</phrase> - -</para> - -&module-os-prober.xml; -&module-hppa-palo-installer.xml; -&module-x86-grub-installer.xml; -&module-x86-lilo-installer.xml; -&module-ia64-elilo-installer.xml; -&module-mips-arcboot-installer.xml; -&module-mipsel-colo-installer.xml; -&module-powerpc-yaboot-installer.xml; -&module-powerpc-quik-installer.xml; -&module-s390-zipl-installer.xml; -&module-sparc-silo-installer.xml; -&module-nobootloader.xml; - </sect2> - - <sect2 id="di-finish"> - <title>De installatie afronden</title> -<para> - -Dit is de laatste stap van het installatieproces voor &debian; waarbij het -installatiesysteem nog enkele afrondende taken uitvoert. -Het bestaat voornamelijk uit het afwerken van losse eindjes van &d-i;. - -</para> - -&module-clock-setup-finish.xml; -&module-finish-install.xml; - </sect2> - - <sect2 id="di-miscellaneous"> - <title>Diverse modules</title> -<para> - -De modules in deze sectie zijn normaalgesproken niet betrokken in het -installatieproces, maar zijn beschikbaar op de achtergrond voor gebruik -als er iets mis gaat. - -</para> - -&module-save-logs.xml; -&module-cdrom-checker.xml; -&module-shell.xml; - </sect2> -&module-network-console.xml; - </sect1> diff --git a/nl/using-d-i/loading-firmware.xml b/nl/using-d-i/loading-firmware.xml deleted file mode 100644 index 1fa223cb1..000000000 --- a/nl/using-d-i/loading-firmware.xml +++ /dev/null @@ -1,134 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 56290 untranslated --> - - <sect1 id="loading-firmware" arch="not-s390"> - <title>Loading Missing Firmware</title> -<para> - -As described in <xref linkend="hardware-firmware"/>, some devices require -firmware to be loaded. In most cases the device will not work at all -if the firmware is not available; sometimes basic functionality is not -impaired if it is missing and the firmware is only needed to enable -additional features. - -</para><para> - -If a device driver requests firmware that is not available, &d-i; will -display a dialog offering to load the missing firmware. If this option -is selected, &d-i; will scan available devices for either loose firmware -files or packages containing firmware. If found, the firmware will be -copied to the correct location (<filename>/lib/firmware</filename>) and -the driver module will be reloaded. - -</para> -<note><para> - -Which devices are scanned and which file systems are supported depends on -the architecture, the installation method and the stage of the installation. -Especially during the early stages of the installation, loading the firmware -is most likely to succeed from a FAT-formatted floppy disk or USB stick. -<phrase arch="x86">On i386 and amd64 firmware can also be loaded from an -MMC or SD card.</phrase> - -</para></note> -<para> - -Note that it is possible to skip loading the firmware if you know the -device will also function without it, or if the device is not needed during -the installation. - -</para> -<warning><para> - -Support for loading firmware is still relatively basic and is likely to -be improved in future releases of the installer. Currently &d-i; will -for example not display any warning if you choose to load missing firmware, -but the requested firmware is not found. -Please report any issues you encounter by filing an installation report -(see <xref linkend="submit-bug"/>). - -</para></warning> - - <sect2><title>Preparing a medium</title> -<para> - -Although in some cases the firmware can also be loaded from a partition on -a hard disk, the most common method to load firmware will be from some -removable medium such as a floppy disk or a USB stick. -The firmware files or packages must be placed in either the root directory -or a directory named <filename>/firmware</filename> of the file system on -the medium. The recommended file system to use is FAT as that is most -certain to be supported during the early stages of the installation. - -</para><para> - -Tarballs containing current packages for the most common firmware are -available from: - -<itemizedlist> -<listitem><para> -<ulink url="&url-firmware-tarballs;"/> -</para></listitem> -</itemizedlist> - -Just download the tarball for the correct release and unpack it to the file -system on the medium. - -</para><para> - -If the firmware you need is not included in the tarball, you can also -download specific firmware packages from the (non-free section of the) -archive. The following overview should list most available firmware -packages but is not guaranteed to be complete and may also contain -non-firmware packages: - -<itemizedlist> -<listitem><para> -<ulink url="&url-firmware-packages;"/> -</para></listitem> -</itemizedlist> - -</para><para> - -It is also possible to copy individual firmware files to the medium. Loose -firmware could be obtained for example from an already installed system or -from a hardware vendor. - -</para> - </sect2> - - <sect2><title>Firmware and the Installed System</title> -<para> - -Any firmware loaded during the installation will be copied automatically -to the installed system. In most cases this will ensure that the device -that requires the firmware will also work correctly after the system is -rebooted into the installed system. However, if the installed system runs -a different kernel version from the installer there is a slight chance that -the firmware cannot be loaded due to version skew. - -</para><para> - -If the firmware was loaded from a firmware package, &d-i; will also install -this package for the installed system and will automatically add the non-free -section of the package archive in APT's <filename>sources.list</filename>. -This has the advantage that the firmware should be updated automatically if -a new version becomes available. - -</para><para> - -If loading the firmware was skipped during the installation, the relevant -device will probably not work with the installed system until the firmware -(package) is installed manually. - -</para> -<note><para> - -If the firmware was loaded from loose firmware files, the firmware copied to -the installed system will <emphasis>not</emphasis> be automatically updated -unless the corresponding firmware package (if available) is installed after -the installation is completed. - -</para></note> - </sect2> - </sect1> diff --git a/nl/using-d-i/modules/anna.xml b/nl/using-d-i/modules/anna.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/anna.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/apt-setup.xml b/nl/using-d-i/modules/apt-setup.xml deleted file mode 100644 index 13e77789d..000000000 --- a/nl/using-d-i/modules/apt-setup.xml +++ /dev/null @@ -1,41 +0,0 @@ -<!-- original version: 33820 --> - - <sect3 id="apt-setup"> - <title>Het configureren van APT</title> - -<para> - -Het belangrijkste middel dat mensen gebruiken om pakketten op hun systeem -te installeren is een programma genaamd <command>apt-get</command>, -uit het pakket <classname>apt</classname><footnote> - -<para> - -Merk op dat het programma dat de feitelijke installatie van pakketten -uitvoert, <command>dpkg</command> is. Dit programma is echter meer een -soort specialistisch gereedschap en wordt waar nodig door -<command>apt-get</command> aangeroepen. <command>apt-get</command> bevat echter -ook hogere functionaliteit: het is in staat om andere pakketten te -installeren die vereist zijn voor het pakket dat u probeert te installeren -en ook om pakketten op te halen vanaf CD, het netwerk en andere bronnen. - -</para> -</footnote>. -Ook andere hulpprogramma's voor pakketbeheer, zoals <command>aptitude</command>, -<command>synaptic</command> en het oudere <command>dselect</command> maken -gebruik en zijn afhankelijk van <command>apt-get</command>. Nieuwe gebruikers -wordt aangeraden gebruik te maken van deze hulpprogramma's omdat zij aanvullende -functionaliteit (het zoeken van pakketten en status controles) integreren in een -vriendelijke gebruikersinterface. - -</para><para> - -APT moet worden geconfigureerd zodat het weet waar pakketten vandaan kunnen -worden gehaald. Het installatiesysteem verzorgt dit grotendeels automatisch op -basis van de gebruike installatiemethode. Het resultaat van deze configuratie -wordt weggeschreven naar het bestand <filename>/etc/apt/sources.list</filename>. -U kunt dit bestand na afronding van de installatie bekijken en naar behoefte -aanpassen. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/autopartkit.xml b/nl/using-d-i/modules/autopartkit.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/autopartkit.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/base-installer.xml b/nl/using-d-i/modules/base-installer.xml deleted file mode 100644 index 215fe6974..000000000 --- a/nl/using-d-i/modules/base-installer.xml +++ /dev/null @@ -1,26 +0,0 @@ -<!-- original version: 43573 --> - -<para> - -Tijdens de installatie van het basissysteem worden boodschappen met -betrekking tot het uitpakken en configureren van pakketten doorgestuurd -naar <userinput>tty4</userinput>. U kunt naar deze terminal schakelen door -op <keycombo><keycap>Linker Alt</keycap><keycap>F4</keycap></keycombo> te -drukken; u schakelt terug naar het hoofdscherm van de installatie met behulp -van <keycombo><keycap>Linker Alt</keycap><keycap>F1</keycap></keycombo>. - -</para><para> - -De boodschappen die tijdens deze fase worden gegenereerd worden ook -opgeslagen in <filename>/var/log/syslog</filename>. Als de installatie wordt -uitgevoerd vanaf een seriële console, kunt u ze daar raadplegen. - -</para><para> - -Als onderdeel van de installatie zal een &arch-kernel; kernel worden geïnstalleerd. -Tijdens een standaard installatie zal het installatiesysteem een kernel voor -u kiezen die het beste past bij uw apparatuur. Bij installaties op een -lagere prioriteit zal een lijst worden getoond met beschikbare kernels waaruit -u een keuze kunt maken. - -</para> diff --git a/nl/using-d-i/modules/cdrom-checker.xml b/nl/using-d-i/modules/cdrom-checker.xml deleted file mode 100644 index d4c2f588b..000000000 --- a/nl/using-d-i/modules/cdrom-checker.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14337 untranslated --> diff --git a/nl/using-d-i/modules/cdrom-detect.xml b/nl/using-d-i/modules/cdrom-detect.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/cdrom-detect.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/choose-mirror.xml b/nl/using-d-i/modules/choose-mirror.xml deleted file mode 100644 index 01a36f47c..000000000 --- a/nl/using-d-i/modules/choose-mirror.xml +++ /dev/null @@ -1,23 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 43658 untranslated --> - -<!-- -Hmm. This really does need documenting :-/ - -- Component is only selected and executed if the installer needs to load - installer components or the base system from the network - (either local or the internet). -- This means you first have to configure a network interface. -- Mirror selection is delayed until apt-setup for CD-based installs (except - businesscard) -- A list of countries is displayed with the default based on the country you - selected earlier. -- Selection of a local mirror (at top of the list: manual selection). -- After selecting a country, a list of mirrors in the country will be shown. - (not for ftp) -- Forcing to ftp can be done using "protocol=ftp" -- Note that not all mirrors are equal (see http://www.nl.debian.org/mirror/list) - -- The selected mirror will be tested. -- How to handle problems with mirrors. ---> diff --git a/nl/using-d-i/modules/clock-setup-finish.xml b/nl/using-d-i/modules/clock-setup-finish.xml deleted file mode 100644 index 7689d0a81..000000000 --- a/nl/using-d-i/modules/clock-setup-finish.xml +++ /dev/null @@ -1,33 +0,0 @@ -<!-- original version: 61133 --> - - <sect3 arch="not-s390" id="system-clock"> - <title>De interne systeemklok instellen</title> - -<para> - -Het installatiesysteem kan u vragen of de interne klok van uw systeem staat -ingesteld op Greenwich Mean Time (GMT of UTC) of niet. Indien mogelijk wordt -deze vraag echter vermeden en zal het installatiesysteem op basis van -informatie als de aanwezigheid van andere besturingssystemen zelf proberen te -bepalen of de interne klok al dan niet is ingesteld op UTC. - -</para><para> - -Bij een installatie in "expert" modus zal u altijd kunnen kiezen of de interne -klok staat ingesteld op UTC of niet. -<phrase arch="powerpc">De interne klok van Macintosh computers staat -gewoonlijk ingesteld op de lokale tijd. Selecteer lokaal in plaats van -GMT als u meerdere besturingssystemen op uw computer wilt gebruiken.</phrase> -<phrase arch="any-x86">Systemen waarop (ook) Dos of Windows draait, staan -gewoonlijk ingesteld op de lokale tijd. Selecteer lokaal in plaats van -GMT als u meerdere besturingssystemen op uw computer wilt gebruiken.</phrase> - -</para><para> - -Het installatiesysteem zal op dit punt ook proberen om de huidige tijd vast -te leggen in de interne systeemklok. Dit zal worden gedaan ofwel in UTC -ofwel in de locale tijd, afhankelijk van de zojuist gedane selectie. -schrijven - -</para> - </sect3> diff --git a/nl/using-d-i/modules/clock-setup.xml b/nl/using-d-i/modules/clock-setup.xml deleted file mode 100644 index 43d9be7cb..000000000 --- a/nl/using-d-i/modules/clock-setup.xml +++ /dev/null @@ -1,24 +0,0 @@ -<!-- original version: 59889 --> - - <sect3 id="clock-setup"> - <title>De klok instellen</title> - -<para arch="not-s390"> - -Het installatiesysteem zal allereerst proberen om verbinding te maken met -een tijdserver op het Internet (gebruikmakend van het <firstterm>NTP</firstterm> -protocol) om op basis daarvan de systeemtijd juist in te stellen. -Als dit mislukt, zal het systeem ervan uitgaan dat de datum en tijd die -tijdens het opstarten van het installatiesysteem zijn bepaald op basis van -de interne systeemklok, juist zijn. Het is niet mogelijk om tijdens de -installatie de systeemtijd handmatig in te stellen. - -</para><para arch="s390"> - -Het installatiesysteem wijzigt de systeemtijd niet op het s390 platform. - -</para> - -&module-tzsetup.xml; - - </sect3> diff --git a/nl/using-d-i/modules/ddetect.xml b/nl/using-d-i/modules/ddetect.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/ddetect.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/finish-install.xml b/nl/using-d-i/modules/finish-install.xml deleted file mode 100644 index 9bc3190e3..000000000 --- a/nl/using-d-i/modules/finish-install.xml +++ /dev/null @@ -1,20 +0,0 @@ -<!-- original version: 50618 --> - - <sect3 id="finish-install"> - <title>Het systeem opnieuw opstarten</title> - -<para arch="not-s390"> - -U zal worden gevraagd om het installatiemedium (CD, diskette, enz.) -dat u heeft gebruikt om het installatiesysteem op te starten, te verwijderen. -Vervolgens zal uw systeem opnieuw opstarten met uw nieuwe &debian; systeem. - -</para><para arch="s390"> - -Na een laatste dialoog zal het systeem worden gestopt omdat herstarten op -&arch-title; niet wordt ondersteund. U moet vervolgens een IPL voor &debian-gnu; -uitvoeren vanaf de DASD die u tijdens de eerste stappen van de installatie -heeft geselecteerd voor het root bestandssysteem. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/hppa/palo-installer.xml b/nl/using-d-i/modules/hppa/palo-installer.xml deleted file mode 100644 index 84a3608e8..000000000 --- a/nl/using-d-i/modules/hppa/palo-installer.xml +++ /dev/null @@ -1,20 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14602 untranslated --> - - <sect3 arch="hppa"> - <title><command>palo</command>-installer</title> -<para> - -The bootloader on PA-RISC is <quote>palo</quote>. -<command>PALO</command> is similar in configuration and usage to -<command>LILO</command>, with a few exceptions. First of all, -<command>PALO</command> allows you to boot any kernel image on your -boot partition. This is because <command>PALO</command> can actually -read Linux partitions. - -</para><para condition="FIXME"> - -hppa FIXME ( need more info ) - -</para> - </sect3> diff --git a/nl/using-d-i/modules/ia64/elilo-installer.xml b/nl/using-d-i/modules/ia64/elilo-installer.xml deleted file mode 100644 index 0c8088cb8..000000000 --- a/nl/using-d-i/modules/ia64/elilo-installer.xml +++ /dev/null @@ -1,135 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 43573 untranslated --> - - <sect3 arch="ia64"> - <title>Install the <command>ELILO</command> Boot Loader - on a Hard Disk</title> -<para> - -The &architecture; boot loader is called <quote>elilo</quote>. -It is modeled on the <quote>lilo</quote> boot loader for the -x86 architecture and uses a similar configuration file. -However, instead of writing an MBR or partition boot record to -the disk, it copies the necessary files to a separate FAT formatted -disk partition and modifies the <guimenuitem>EFI Boot Manager</guimenuitem> -menu in the firmware to point to the files in the EFI partition. -The <command>elilo</command> boot loader is really in two parts. -The <filename>/usr/sbin/elilo</filename> command manages the partition and -copies files into it. -The <filename>elilo.efi</filename> program is copied into the EFI -partition and then run by the <quote>EFI Boot Manager</quote> to -do the actual work of loading and starting the Linux kernel. - -</para><para> - -The <quote>elilo</quote> configuration and installation is done as the -last step of installing the packages of the base installation. -&d-i; will present you with a list of potential disk partitions that it -has found suitable for an EFI partition. -Select the partition you set up earlier in the installation, typically -a partition on the same disk that contains your -<emphasis>root</emphasis> filesystem. - -</para> - - <warning><title>Choose the correct partition!</title> - -<para> - -The criteria for selecting a partition is that it is FAT format -filesystem with its <emphasis>boot</emphasis> flag set. -&d-i; may show multiple choices depending on what it finds from scanning -all of the disks of the system including EFI partitions of other system -disks and EFI diagnostic partitions. -Remember, <command>elilo</command> may format the partition during -the installation, erasing any previous contents! - -</para></warning> - - </sect3> - - <sect3 arch="ia64"> - <title>EFI Partition Contents</title> - -<para> - -The EFI partition is a FAT filesystem format partition on one of the -hard disks of the system, usually the same disk that contains the -<emphasis>root</emphasis> filesystem. -It is normally not mounted on a running system as it is only needed -by the <quote>EFI Boot Manager</quote> to load the system and the -installer part of the <command>elilo</command> writes to the filesystem -directly. -The <command>/usr/sbin/elilo</command> utility writes the following files -into the <filename>efi/debian</filename> directory of the EFI -partition during the installation. -Note that the <quote>EFI Boot Manager</quote> would find these files -using the path <filename>fs<replaceable>n</replaceable>:\efi\debian</filename>. -There may be other files in this filesystem as well over time as -the system is updated or re-configured. - -</para> - -<variablelist> - -<varlistentry> -<term><filename>elilo.conf</filename></term> -<listitem><para> - -This is the configuration file read by the boot loader when it starts. -It is a copy of the <filename>/etc/elilo.conf</filename> with -the filenames re-written to refer to files in the EFI partition. - -</para></listitem></varlistentry> - -<varlistentry> -<term><filename>elilo.efi</filename></term> -<listitem><para> - -This is the boot loader program that the <quote>EFI Boot Manager</quote> -runs to boot the system. -It is the program behind the <guimenuitem>&debian; GNU/Linux</guimenuitem> -menu item of the <quote>EFI Boot Manager</quote> command menu. - -</para></listitem></varlistentry> - -<varlistentry> -<term><filename>initrd.img</filename></term> -<listitem><para> - -This is the initial root filesystem used to boot the kernel. -It is a copy of the file referenced in the -<filename>/etc/elilo.conf</filename>. -In a standard &debian; installation it would be the file in -<filename>/boot</filename> pointed to by the symbolic link -<filename>/initrd.img</filename>. - -</para></listitem></varlistentry> - -<varlistentry> -<term><filename>readme.txt</filename></term> -<listitem><para> - -This is a small text file warning you that the contents of the -directory are managed by the <command>elilo</command> and that -any local changes would be lost at the next time -<filename>/usr/sbin/elilo</filename> is run. - -</para></listitem></varlistentry> - -<varlistentry> -<term><filename>vmlinuz</filename></term> -<listitem><para> - -This is the compressed kernel itself. -It is a copy of the file referenced in the -<filename>/etc/elilo.conf</filename>. -In a standard &debian; installation it would be the file in -<filename>/boot</filename> pointed to by the symbolic link -<filename>/vmlinuz</filename>. - -</para></listitem></varlistentry> - -</variablelist> - - </sect3> diff --git a/nl/using-d-i/modules/iso-scan.xml b/nl/using-d-i/modules/iso-scan.xml deleted file mode 100644 index 47e3b193f..000000000 --- a/nl/using-d-i/modules/iso-scan.xml +++ /dev/null @@ -1,49 +0,0 @@ -<!-- original version: 23058 --> - - <sect3 id="iso-scan"> - <title>De ISO-installatie-image localiseren</title> -<para> - -Als u de <emphasis>hd-media</emphasis> installatiemethode gebruikt, komt -er een moment waarop u de ISO-image met het &debian; Installatiesysteem -zult moeten localiseren en koppelen om het restant van de -installatiebestanden te laden. Dit is de taak van de module -<command>iso-scan</command>. - -</para><para> - -Allereerst zal <command>iso-scan</command> automatisch alle blok-apparaten -(d.w.z. partities) die een bekend bestandssysteem hebben, koppelen en -deze achtereenvolgens doorzoeken op bestanden met een extensie -<filename>.iso</filename> (of <filename>.ISO</filename>). Merk op dat -tijdens de eerste poging alleen de hoogste twee niveau's van de -mapstructuur zullen worden doorzocht (d.w.z. dat -<filename>/<replaceable>willekeurig</replaceable>.iso</filename> en -bijvoorbeeld <filename>/data/<replaceable>willekeurig</replaceable>.iso</filename> -gevonden zullen worden, maar niet bijvoorbeeld -<filename>/data/tmp/<replaceable>willekeurig</replaceable>.iso</filename>). -Nadat een ISO-image is gevonden, controleert <command>iso-scan</command> of -het een geldig &debian; ISO-installatie-image betreft of niet. In het eerste -geval zijn we klaar, in het tweede geval wordt verder gezocht. - -</para><para> - -Als de eerste poging om een ISO-installatie-image te vinden faalt, -zal <command>iso-scan</command> u vragen of u een meer uitgebreide -zoektocht wilt laten uitvoeren. Tijdens deze poging zal niet alleen in -de hoogste mappen worden gezocht, maar wordt het volledige bestandssysteem -doorlopen. - - -</para><para> - -Als <command>iso-scan</command> uw ISO-installatie-image niet kan vinden, -start dan de computer opnieuw op met uw oorspronkelijke besturingssysteem -en controleer of de image een correcte naam heeft (dus eindigend op -<filename>.iso</filename>), of het staat op een bestandssysteem dat door -&d-i; wordt herkend en of het niet beschadigd is (verifieer de checksum). -Ervaren gebruikers van Unix kunnen deze handelingen eventueel uitvoeren -op de tweede console zonder het systeem opnieuw op te starten. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/kbd-chooser.xml b/nl/using-d-i/modules/kbd-chooser.xml deleted file mode 100644 index 01e360817..000000000 --- a/nl/using-d-i/modules/kbd-chooser.xml +++ /dev/null @@ -1,38 +0,0 @@ -<!-- original version: 60683 --> - - <sect3 id="kbd-chooser"> - <title>Een toetsenbord selecteren</title> - -<para> - -De indeling van toetsenborden is vaak aangepast aan de tekens die in -een taal worden gebruikt. Selecteer een indeling die overeenkomt met -het toetsenbord dat u gebruikt. Als uw toetsenbordindeling niet in de -lijst voorkomt, kies dan de indeling die het best in de buurt komt. -U kunt, nadat de installatie is voltooid, een toetsenbordindeling kiezen -uit een meer uitgebreide selectie (geef hiervoor, nadat u de installatie -heeft afgerond, als root het commando <command>dpkg-reconfigure keyboard-configuration</command>). -<!-- FJP: in laatste zin staat nu 2x dat installatie afgerond moet zijn--> - -</para><para> - -Maak uw keuze door met de cursortoetsen de selectie te verplaatsen en -druk vervolgens op &enterkey;. De cursortoetsen zitten op alle -toetsenbordindelingen op dezelfde plaats en zijn dus onafhankelijk van -de toetsenbordconfiguratie. Een 'extended' toetsenbord heeft -<keycap>F1</keycap> t/m <keycap>F10</keycap> toetsen als bovenste regel. -<!-- FJP: Tegenwoordig hebben we toch t/m F12? --> - -</para><para arch="powerpc"> - -Er zijn twee toetsenbordindelingen voor US toetsenborden: de -qwerty/mac-usb-us (Apple USB) indeling zal de Alt functie koppelen aan de -<keycap>Command/Apple</keycap>-toets (op het toetsenbord naast de -<keycap>spatiebalk</keycap>, dus analoog aan <keycap>Alt</keycap> op -PC-toetsenborden), terwijl de qwerty/us (Standard) indeling de Alt functie -zal koppelen aan de <keycap>Option</keycap>-toets (op de meeste Mac -toetsenborden is op deze toets 'alt' gegraveerd). Verder zijn deze twee -indelingen gelijk. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/localechooser.xml b/nl/using-d-i/modules/localechooser.xml deleted file mode 100644 index fa1a7737d..000000000 --- a/nl/using-d-i/modules/localechooser.xml +++ /dev/null @@ -1,76 +0,0 @@ -<!-- original version: 56423 --> - - - <sect3 id="localechooser"> - <title>Lokalisatie bepalen</title> - -<para> - -Over het algemeen zullen de eerste vragen die worden gesteld de bepaling van -de lokalisatie voor zowel de installatie als het geïnstalleerde systeem -betreffen. De lokalisatie-opties betreffen taal, land en -<quote>locale</quote>. - -</para><para> - -De taal die u kiest zal worden gebruikt tijdens het vervolg van de -installatie, tenminste als een vertaling van de verschillende dialogen -beschikbaar is. Als voor de geselecteerde taal geen geldige vertaling -beschikbaar is, zal het installatiesysteem terugvallen op Engels. - -</para><para> - -Het geselecteerde land zal later in het installatieproces worden gebruikt -bij de selectie van uw tijdzone en een voor uw locatie geschikte &debian; -spiegelserver. Taal en land tezamen zullen worden gebruikt om de standaard -<quote>locale</quote> voor uw systeem in te stellen en om u te helpen bij -de selectie van uw toetsenboord. - -</para><para> - -Allereerst zal worden gevraagd welke taal uw voorkeur heeft. De talen -worden genoemd zowel in het Engels (links) als in de taal zelf (rechts); -de namen aan de rechter zijde worden tevens getoond in het juiste script -voor de taal. De lijst is gesorteerd op de Engelse namen. -Bovenaan de lijst vindt u een extra optie waarmee u, in plaats van een taal, -de <quote>C</quote>-locale kunt selecteren. Het kiezen van de -<quote>C</quote>-locale heeft tot gevolg dat de installatie in het Engels -zal plaatsvinden; daarnaast zal het geïnstalleerde systeem geen ondersteuning -voor lokalisatie hebben aangezien het pakket <classname>locales</classname> -niet zal worden geïnstalleerd. - -</para><para> - -Als u een taal heeft geselecteerd die wordt herkend als officiële taal voor -meer dan één land<footnote> - -<para> - -In technische termen: indien voor die taal meer dan één <quote>locale</quote> -bestaat met verschillende landcodes. - -</para> - -</footnote>, zal een keuzelijst worden getoond met daarin alleen die landen. -Om een land te kiezen dat niet in de lijst voorkomt, kiest u de optie -<guimenuitem>Andere</guimenuitem> onderaan de lijst. Er zal dan een -keuzelijst met continenten worden getoond; na selectie van een continent -gevolgd door een keuzelijst met landen die behoren tot dat continent. - -</para><para> - -Als de taal slechts bij één land voorkomt, zal dat land automatisch worden -geselecteerd. In dat geval is het alleen mogelijk om een ander land te -selecteren door eerst de debconf-prioriteit te verlagen en vervolgens -vanuit het hoofdmenu opnieuw de optie voor taalselectie te kiezen. - -</para><para> - -Op basis van door u geselecteerde taal en land zal een standaardwaarde voor -locale worden bepaald. Als u de installatie uitvoert op een lagere dan de -standaard prioriteit, heeft u de mogelijkheid om een andere standaard locale te -kiezen en om aanvullende locales te kiezen die voor het geïnstalleerde systeem -moeten worden gegenereerd. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/lowmem.xml b/nl/using-d-i/modules/lowmem.xml deleted file mode 100644 index 01a5f4a11..000000000 --- a/nl/using-d-i/modules/lowmem.xml +++ /dev/null @@ -1,21 +0,0 @@ -<!-- original version: 16990 --> - - <sect3 id="lowmem"> - <title>Controle van beschikbaar geheugen</title> - -<para> - -Eén van de eerste dingen die &d-i; doet, is het controleren van het -beschikbare geheugen. Als de hoeveelheid beschikbaar geheugen beperkt -is, zal deze module een aantal wijzigingen aanbrengen in het -installatieproces waardoor u hopelijk in staat zal zijn om &debian-gnu; -op uw systeem te installeren. - -</para><para> - -Tijdens een installatie op een systeem met beperkt geheugen, zullen -niet alle modules beschikbaar zijn. Eén van de beperkingen is dat u -de voor de installatie te gebruiken taal niet zal kunnen kiezen. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/mdcfg.xml b/nl/using-d-i/modules/mdcfg.xml deleted file mode 100644 index 9a6e9bd76..000000000 --- a/nl/using-d-i/modules/mdcfg.xml +++ /dev/null @@ -1,233 +0,0 @@ -<!-- original version: 50619 --> - - <sect3 id="mdcfg"> - <title>Meervoudige schijfapparaten configureren (Software-RAID)</title> -<para> - -Als u in uw computer meer dan één harde schijf<footnote><para> - -U zou zelfs een Software-RAID kunnen samenstellen uit verschillende -partities op één fysieke harde schijf, maar daarmee bereikt u niets -zinvols. - -</para></footnote> heeft, kunt u <command>mdcfg</command> gebruiken -om uw schijfeenheden te configureren voor betere prestaties en/of -grotere betrouwbaarheid van uw gegevens. Het resultaat wordt een -<firstterm>Multidisk Device</firstterm> (MD) of, naar zijn meest -bekende variant, <firstterm>Software-RAID</firstterm>). - -</para><para> - -MD is in feite niets meer dan een verzameling partities op verschillende -harde schijven die worden gecombineerd om gezamelijk één -<emphasis>logisch</emphasis> apparaat te vormen. Dit apparaat kan vervolgens -worden gebruikt als een gewone partitie (dat wil zeggen dat u het in -<command>partman</command> kunt formatteren en een aanhechtpunt kunt toewijzen. - -</para><para> - -Het voordeel dat u behaalt, is afhankelijk van het soort MD-apparaat dat u -creëert. Op dit moment worden ondersteund: - -<variablelist> -<varlistentry> - -<term>RAID0</term><listitem><para> - -Levert hoofdzakelijk prestatieverbetering. RAID0 splitst alle binnenkomende -gegevens op in zogenaamde <firstterm>stripes</firstterm> en verdeelt deze -gelijkmatig over elke schijf in de reeks. Dit kan de snelheid van lees- en -schrijfoperaties verhogen, maar als één van de schijven defect raakt, -verliest u <emphasis>alle</emphasis> gegevens (een deel van de informatie -staat nog wel op de 'gezonde' schijf/schijven, maar een ander deel -<emphasis>stond</emphasis> op de defecte schijf). - -</para><para> - -RAID0 wordt bijvoorbeeld veel toegepast voor video editing. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>RAID1</term><listitem><para> - -Is geschikt voor situaties waar betrouwbaarheid de belangrijkste -overweging is. Het bestaat uit verschillende (gewoonlijk twee) partities -van gelijke grootte; beide partities bevatten exact dezelfde gegevens. -In essentie betekent dit drie dingen. Ten eerste heeft u, als één van de -schijven defect raakt, nog altijd de gegevens op de tweede schijf. Ten -tweede kunt u effectief slechts een deel van de beschikbare capaciteit -gebruiken (meer exact: de grootte van de kleinste partitie in de RAID). -Ten derde wordt de belasting bij het lezen van gegevens verdeeld over -de schijven; dit kan de prestaties verbeteren als op een server over het -algemeen meer lees- dan schrijfacties plaatsvinden, zoals bij een -bestandsserver. - -</para><para> - -Desgewenst kunt u een reserve harde schijf in de reeks opnemen die bij -een storing de plaats zal innemen van de defecte schijf. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>RAID5</term><listitem><para> - -Is een goed compromis tussen snelheid, betrouwbaarheid en redundantie van -gegevens. Bij RAID5 worden binnenkomende gegevens gesplitst in stripes en -gelijkmatig verdeeld over alle harde schijven op één na (vergelijkbaar met -RAID0). In afwijking van RAID0, wordt bij RAID5 ook -<firstterm>pariteits</firstterm>informatie berekend die op de overgebleven -schijf wordt weggeschreven. De harde schijf met de pariteitsinformatie is -niet statisch (dat zou RAID4 zijn), maar wordt periodiek gewijzigd zodat de -pariteitsinformatie gelijkelijk wordt verdeeld over de schijven. Als één van -de schijven defect raakt, kunnen de ontbrekende gegevens worden berekend op -basis van de resterende gegevens en hun pariteit. RAID5 dient te zijn -opgebouwd uit tenminste drie actieve partities. Desgewenst kunt u een reserve -harde schijf in de reeks opnemen die bij een storing de plaats zal innemen -van de defecte schijf. - -</para><para> - -Zoals u kunt zien, heeft RAID5 een vergelijkbare mate van betrouwbaarheid -als RAID1 terwijl de opslag minder redundant is. Aan de andere kant is het, -in verband met de berekening van de partiteitsinformatie, mogelijk iets -trager bij schrijfoperaties dan RAID0 . - -</para></listitem> -</varlistentry> -</variablelist> - -Samenvattend: - -<informaltable> -<tgroup cols="5"> -<thead> -<row> - <entry>Type</entry> - <entry>Minimum apparaten</entry> - <entry>Reserve schijf</entry> - <entry>Overleeft een storing?</entry> - <entry>Beschikbare ruimte</entry> -</row> -</thead> - -<tbody> -<row> - <entry>RAID0</entry> - <entry>2</entry> - <entry>nee</entry> - <entry>nee</entry> - <entry>Grootte van de kleinste partitie vermenigvuldigd met het aantal apparaten</entry> -</row> - -<row> - <entry>RAID1</entry> - <entry>2</entry> - <entry>optioneel</entry> - <entry>ja</entry> - <entry>Grootte van de kleinste partitie in de RAID</entry> -</row> - -<row> - <entry>RAID5</entry> - <entry>3</entry> - <entry>naar keuze</entry> - <entry>ja</entry> - <entry> - Grootte van de kleinste partitie vermenigvuldigd met - (het aantal apparaten in de RAID minus één) - </entry> -</row> - -</tbody></tgroup></informaltable> - -</para><para> - -Als u meer wilt weten over Software-RAID, raadpleeg dan de -<ulink url="&url-software-raid-howto;">Software RAID HOWTO</ulink>. - -</para><para> - -Om een MD-apparaat aan te maken, dient u de partities die u ervan onderdeel -wilt laten uitmaken, te markeren voor gebruik in een RAID. -U doet dit in <command>partman</command> in het menu met <guimenu>partitie -instellingen</guimenu>. Daar selecteert u <menuchoice><guimenu>Gebruiken -als:</guimenu> <guimenuitem>Fysiek volume voor RAID</guimenuitem></menuchoice>. - -</para><warning><para> - -Ondersteuning voor meervoudige schijfapparaten is relatief nieuwe -functionaliteit in het installatiesysteem. Het is mogelijk dat u daardoor -problemen ondervindt bij sommige RAID-varianten, of in de combinatie van MD -met sommige opstartladers als probeert een MD te gebruiken voor het -bestandssysteem root (<filename>/</filename>). Ervaren gebruikers kunnen -proberen om deze problemen op te lossen door bepaalde configuratie- of -installatiestappen handmatig uit te voeren vanuit een opdrachtschil. - -</para></warning><para> - -Vervolgens dient u in het hoofdmenu van <command>partman</command> -te kiezen voor <guimenuitem>Software-RAID instellen</guimenuitem>. -(N.B. Dit menu verschijnt pas nadat u tenminste één partitie heeft -gemarkeerd voor gebruik als <guimenuitem>Fysiek volume voor -RAID</guimenuitem>.) -Kies dan op het eerste scherm van <command>mdcfg</command> voor -<guimenuitem>MD-apparaat aanmaken</guimenuitem>. Er zal een lijst -met ondersteunde typen MD-apparaten worden getoond, waaruit u er één -kunt kiezen (bijvoorbeeld RAID1). Het vervolg is afhankelijk van het -geselecteerde type MD. - -</para> - -<itemizedlist> -<listitem><para> - -RAID0 is eenvoudig — er zal een overzicht met beschikbare -RAID-partities worden getoond en uw enige taak is het selecteren van de -partities die u voor het MD-apparaat wilt gebruiken. - -</para></listitem> -<listitem><para> - -RAID1 is iets lastiger. Allereerst zal u worden gevraagd om het aantal -actieve en het aantal reserve eenheden voor het MD-apparaat in te -geven. Vervolgens dient u uit de lijst met beschikbare RAID-partities -eerst de partities te kiezen die actief moeten zijn en vervolgens de -reserve partities. Het aantal partities dat u selecteert moet gelijk zijn -aan het aantal dat u zojuist heeft opgegeven. Maak u geen zorgen; als u -een fout maakt en een afwijkend aantal partities selecteert, zal &d-i; -u beletten verder te gaan totdat dit gecorrigeerd is. - -</para></listitem> -<listitem><para> - -De configuratieprocedure voor RAID5 is vergelijkbaar met die voor RAID1. -Het enige verschil is dat u tenminste <emphasis>3</emphasis> actieve -partities dient te gebruiken. - -</para></listitem> -</itemizedlist> - -<para> - -Het is zonder meer mogelijk om verschillende typen MD-apparaten naast -elkaar te hebben. Als u bijvoorbeeld drie 200GB harde schijven heeft -ten behoeve van MD, elk met twee 100 GB partities, kunt u de eerste -partities op alle drie de schijven samenvoegen tot één RAID0 (snelle -partitie van 300GB voor video editing) en de andere drie partities -(2 actief en 1 reserve) gebruiken voor RAID1 (als zeer betrouwbare -100GB partitie voor <filename>/home</filename>). - -</para><para> - -Nadat u de MD-apparaten naar uw tevredenheid heeft ingesteld, kunt u -<command>mdcfg</command> afsluiten om terug te keren naar -<command>partman</command> om op uw nieuwe MD-apparaten bestandssystemen -aan te maken en daaraan de gebruikelijke kenmerken, zoals aanhechtpunten, -toe te kennen. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/mips/arcboot-installer.xml b/nl/using-d-i/modules/mips/arcboot-installer.xml deleted file mode 100644 index 2e522562e..000000000 --- a/nl/using-d-i/modules/mips/arcboot-installer.xml +++ /dev/null @@ -1,69 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 35613 untranslated --> - - <sect3 arch="mips"> - <title><command>arcboot</command>-installer</title> -<para> - -The boot loader on SGI machines is <command>arcboot</command>. -It has to be installed on the same hard disk as the kernel (this is done -automatically by the installer). Arcboot supports different configurations -which are set up in <filename>/etc/arcboot.conf</filename>. Each -configuration has a unique name, -the default setup as created by the installer is <quote>linux</quote>. -After arcboot has been installed, the system can be booted from hard disk -by setting some firmware environment variables entering - -<informalexample><screen> -<userinput> setenv SystemPartition scsi(<replaceable>scsi</replaceable>)disk(<replaceable>disk</replaceable>)rdisk(0)partition(0)</userinput> -<userinput> setenv OSLoadPartition scsi(<replaceable>scsi</replaceable>)disk(<replaceable>disk</replaceable>)rdisk(0)partition(<replaceable>partnr</replaceable>)</userinput> -<userinput> setenv OSLoader arcboot</userinput> -<userinput> setenv OSLoadFilename <replaceable>config</replaceable></userinput> -<userinput> setenv AutoLoad yes</userinput> -</screen></informalexample> - -on the firmware prompt, and then typing <command>boot</command>. - -</para> - -<variablelist> -<varlistentry> -<term> <replaceable>scsi</replaceable> </term> -<listitem><para> - -is the SCSI bus to be booted from, this is <userinput>0</userinput> -for the onboard controllers - -</para></listitem> -</varlistentry> -<varlistentry> -<term> <replaceable>disk</replaceable> </term> -<listitem><para> - -is the SCSI ID of the hard disk on which <command>arcboot</command> is -installed - -</para></listitem> -</varlistentry> -<varlistentry> -<term> <replaceable>partnr</replaceable> </term> -<listitem><para> - -is the number of the partition on which -<filename>/etc/arcboot.conf</filename> resides - -</para></listitem> -</varlistentry> -<varlistentry> -<term> <replaceable>config</replaceable> </term> -<listitem><para> - -is the name of the configuration entry in -<filename>/etc/arcboot.conf</filename>, which is <quote>linux</quote> by -default. - -</para></listitem> -</varlistentry> -</variablelist> - - </sect3> diff --git a/nl/using-d-i/modules/mipsel/colo-installer.xml b/nl/using-d-i/modules/mipsel/colo-installer.xml deleted file mode 100644 index d4c2f588b..000000000 --- a/nl/using-d-i/modules/mipsel/colo-installer.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14337 untranslated --> diff --git a/nl/using-d-i/modules/netcfg.xml b/nl/using-d-i/modules/netcfg.xml deleted file mode 100644 index 4cf6211e7..000000000 --- a/nl/using-d-i/modules/netcfg.xml +++ /dev/null @@ -1,57 +0,0 @@ -<!-- original version: 50619 --> - - <sect3 id="netcfg"> - <title>Het netwerk configureren</title> - -<para> - -Als het systeem, wanneer u start met deze stap, detecteert dat u meer -dan één netwerkkaart heeft, zal u worden gevraagd welke van de apparaten -u wilt gebruiken voor uw primaire netwerkinterface, dat wil zeggen welke -u wilt gebruiken voor de installatie. U kunt de overige interfaces -configureren nadat de installatie is voltooid; zie hiervoor de man pagina -<citerefentry> <refentrytitle>interfaces</refentrytitle> -<manvolnum>5</manvolnum> </citerefentry>. - -</para><para> - -Tijdens een standaardinstallatie zal &d-i; proberen uw netwerkinterface -automatisch met behulp van DHCP in te stellen. Er zijn verschillende -redenen waarom dit zou kunnen falen, variërend van het niet aangesloten -zijn van de netwerkkabel tot een onjuiste DHCP-configuratie. Ook is het -mogelijk dat er helemaal geen DHCP-server in uw lokale netwerk aanwezig -is. Voor nadere diagnose kunt u de boodschappen op de vierde console -raadplegen. In elk geval zal u worden gevraagd of u een nieuwe poging wilt -wagen of dat u het netwerk handmatig wilt configureren. DHCP-servers -kunnen soms zeer traag zijn; probeer het dus nogmaals als u zeker weet dat -alles juist is ingesteld. - -</para><para> - -Bij handmatige configuratie van de netwerkinterface, zal u een aantal -vragen worden gesteld over uw netwerk, te weten: -<computeroutput>IP-adres</computeroutput>, -<computeroutput>Netwerkmasker</computeroutput>, -<computeroutput>Gateway</computeroutput>, -<computeroutput>Adressen van naamservers</computeroutput>, en -<computeroutput>Computernaam</computeroutput>. -Als u beschikt over een draadloos netwerkapparaat, zal u worden gevraagd -naar de <computeroutput>ESSID</computeroutput> van uw draadloos netwerk -en de <computeroutput>WEP sleutel</computeroutput>. Voer de waarden in -die u heeft verzameld bij <xref linkend="needed-info"/>. - -</para><note><para> - -De volgende technische details kunnen mogelijk van pas komen (of niet). -Het programma gaat ervan uit dat het IP-adres van uw netwerk het resultaat -is van een bit-gewijze AND-operatie van het IP-adres van uw systeem en het -netwerkmasker. Het standaard Broadcast-adres wordt berekend als het resultaat -van een bit-gewijze OR-operatie van het IP-adres van uw systeem en de -bitgewijze inverse van het netwerkmasker. Ook zal een default waarde voor een -standaard router (gateway) worden bepaald. Gebruik de staandaardwaarden van het -installatiesysteem als u de juiste waarden voor deze vragen niet kunt vinden; -u kunt ze, indien nodig, altijd nog wijzigen nadat de installatie is afgerond -door het bestand <filename>/etc/network/interfaces</filename> te wijzigen. - -</para></note> - </sect3> diff --git a/nl/using-d-i/modules/network-console.xml b/nl/using-d-i/modules/network-console.xml deleted file mode 100644 index edaee355f..000000000 --- a/nl/using-d-i/modules/network-console.xml +++ /dev/null @@ -1,110 +0,0 @@ -<!-- original version: 31173 --> - - <sect2 id="network-console"> - <title>Installeren over het netwerk</title> - -<para arch="not-s390"> - -Een van de meer interressante componenten is -<firstterm>network-console</firstterm>. Deze component maakt het mogelijk -om een groot deel van de installatie via SSH over het netwerk uit te voeren. -Het gebruik van het netwerk impliceert dat u de eerste stappen van de -installatie vanaf de console zult moeten uitvoeren: in ieder geval tot en -met de configuratie van het netwerk. (Het is echter mogelijk om dat deel van -de installatie te automatiseren; zie <xref linkend="automatic-install"/>.) - -</para><para arch="not-s390"> - -Deze component wordt niet automatisch getoond in het installatie menu en -dus moet u hem expliciet laden. - -Als u installeert vanaf CD-ROM, dient u de installatie te starten met -prioriteit <quote>medium</quote> of op een andere wijze het hoofdmenu -zichtbaar te maken. Bij de optie <guimenuitem>Installatiemodules van CD -laden</guimenuitem> selecteert u <guimenuitem>network-console: Continue -installation remotely using SSH</guimenuitem>. De component is succesvol -geladen als in het hoofdmenu een nieuwe optie <guimenuitem>Installatie -verder van op afstand doorlopen via SSH</guimenuitem> aanwezig is. - -</para><para arch="s390"> - -Voor installaties op &arch-title; is dit de standaard methode nadat -het netwerk is geconfigureerd. - -</para><para> - -<phrase arch="not-s390">Nadat u deze nieuwe optie heeft geselecteerd, -zal u</phrase><phrase arch="s390">U zal</phrase> worden gevraagd -naar een wachtwoord waarmee de verbinding met het installatiesysteem -zal worden gerealiseerd en een bevestiging daarvan. Dat is alles. -Vervolgens zal een melding worden getoond met instructies om vanaf een -ander systeem in te loggen als gebruiker <emphasis>installer</emphasis> -met het wachtwoord dat u daarnet heeft ingevoerd. Een ander belangrijk -detail op dit scherm is de <quote>vingerafdruk</quote> van dit systeem. -U dient deze op een veilige manier beschikbaar te stellen aan degene die -de installatie op afstand zal vervolgen. - -</para><para> - -Indien u besluit de installatie locaal te vervolgen, kunt u altijd met -behulp van de &enterkey; terugkeren naar het hoofdmenu, vanwaar u de -installatie kunt vervolgen. - -</para><para> - -Laten we ons nu verplaatsen naar het andere einde van de netwerkkabel. -Voordat u de verbinding kunt opzetten, dient u uw terminal te configureren -voor UTF-8 codering aangezien dat is wat het installatiesysteem gebruikt. -Als u dit niet doet is installatie nog wel mogelijk, maar kunt u vreemde -effecten op uw scherm tegenkomen als ontbrekende randen van dialogen of -onleesbare niet-ASCII karakters. U brengt de verbinding met het -installatiesysteem eenvoudig tot stand met: - -<informalexample><screen> -<prompt>$</prompt> <userinput>ssh -l installer <replaceable>nieuw_systeem</replaceable></userinput> -</screen></informalexample> - -Hierbij is <replaceable>nieuw_systeem</replaceable> ofwel de systeemnaam -ofwel het IP-adres van het systeem dat wordt geïnstalleerd. Voordat -daadwerkelijk wordt aangelogd zal de vingerafdruk van dat systeem worden -getoond en zult u moeten bevestigen dat dit correct is. - -</para><note><para> - -Als u meerdere systemen achter elkaar installeert en deze hetzelfde IP-adres -of dezelfde systeemnaam krijgen, zal <command>ssh</command> weigeren om de -verbinding te maken. De reden is dat opeenvolgende systemen een andere -vingerafdruk zullen hebben, wat meestal een indicatie is van een -<quote>spoofing</quote> aanval. Als u er zeker van bent dat dit niet het -geval is, dient u de betreffende regel te verwijderen uit -<filename>~/.ssh/known_hosts</filename> waarna u een nieuwe poging kunt doen. - -</para></note><para> - -Nadat u bent aangelogd zal een aanvangsscherm worden getoond met twee -opties genaamd <guimenuitem>Menu opstarten</guimenuitem> en -<guimenuitem>Shell opstarten</guimenuitem>. Eerstgenoemde optie biedt -toegang tot het hoofdmenu van het installatiesysteem vanwaar u de -installatie kunt vervolgen. Laatstgenoemde optie start een shell op het -nieuwe systeem die u kunt gebruiken om bijvoorbeeld logs te bekijken of -commando's uit te voeren. U dient maximaal één SSH-sessie te starten met -een installatiemenu, maar kunt desgewenst meerdere sessies starten met -een shell. - -</para><warning><para> - -Nadat u via SSH de installatie op afstand heeft gestart, kunt u de -installatiesessie op de locale console niet meer hervatten. Als u dat toch -doet, is de kans groot dat de gegevensbank met de configuratie van het -nieuwe systeem beschadigd raakt. Dit kan weer tot gevolg hebben dat de -installatie mislukt of resulteren in problemen met het nieuwe systeem. - -</para><para> - -Daarnaast wordt afgeraden om, als u de SSH-sessie uitvoert in een -X-terminal, de grootte van het venster te wijzigen aangezien het gevolg -zal zijn dat de verbinding wordt verbroken. - -</para></warning> - - </sect2> diff --git a/nl/using-d-i/modules/nobootloader.xml b/nl/using-d-i/modules/nobootloader.xml deleted file mode 100644 index ee85f4942..000000000 --- a/nl/using-d-i/modules/nobootloader.xml +++ /dev/null @@ -1,35 +0,0 @@ -<!-- original version: 61133 --> - - <sect3 id="nobootloader"> - <title>Verder gaan zonder opstartlader</title> - -<para> - -Deze optie kan gebruikt worden om de installatie te voltooien als er -geen opstartlader wordt geïnstalleerd, ofwel omdat er geen beschikbaar is -voor het (sub)platform, ofwel omdat u er geen wilt installeren (b.v. als -u de bestaande opstartlader wilt gebruiken). - -</para><para> - -If you plan to manually configure your bootloader, you should check the -name of the installed kernel in <filename>/target/boot</filename>. -You should also check that directory for the presence of an -<firstterm>initrd</firstterm>; if one is present, you will probably have -to instruct your bootloader to use it. Other information you will need -are the disk and partition you selected for your <filename>/</filename> -filesystem and, if you chose to install <filename>/boot</filename> on a -separate partition, also your <filename>/boot</filename> filesystem. -Als u van plan bent om uw opstartlader handmatig te configureren, -adviseren wij om in <filename>/target/boot</filename> de naam van de -geïnstalleerde kernel te controleren. Daarnaast dient u diezelfde map te -controleren op de aanwezigheid van een <firstterm>initrd</firstterm>. -Indien een initrd aanwezig is, zult u waarschijnlijk uw opstartlader -moeten configureren om deze te gebruiken. Andere gegevens die u nodig -heeft zijn de harde schijf en partitie die u heeft geselecteerd voor uw -<filename>/</filename> bestandssysteem en, als u ervoor heeft gekozen om -<filename>/boot</filename> op een afzonderlijke partitie te installeren, -ook die voor uw <filename>/boot</filename> bestandssysteem. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/os-prober.xml b/nl/using-d-i/modules/os-prober.xml deleted file mode 100644 index b51f8a16d..000000000 --- a/nl/using-d-i/modules/os-prober.xml +++ /dev/null @@ -1,24 +0,0 @@ -<!-- original version: 33725 --> - - <sect3 id="os-prober"> - <title>Andere besturingssystemen detecteren</title> - -<para> - -Voordat een opstartlader wordt geïnstalleerd, zal het installatiesysteem -eerst proberen om te ontdekken of er andere besturingsystemen op de machine -aanwezig zijn. Als het een besturingssysteem heeft gevonden dat wordt -ondersteund, zult u hierover worden geïnformeerd tijdens de installatie van -de opstartlader en zal de computer geconfigureerd worden om naast &debian; ook -dit andere besturingsysteem te kunnen opstarten. - -</para><para> - -Merk op dat het opstarten van meerdere besturingssystemen op één machine nog -altijd iets wegheeft van zwarte magie. De ondersteuning voor de detectie van -andere besturingssystemen en voor het instellen van opstartladers om deze te -laden, varieert per (sub)platform. Als het niet werkt dient u de documentatie -van uw opstartlader te raadplegen voor nadere informatie. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/partconf.xml b/nl/using-d-i/modules/partconf.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/partconf.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/partitioner.xml b/nl/using-d-i/modules/partitioner.xml deleted file mode 100644 index 0dabd4a41..000000000 --- a/nl/using-d-i/modules/partitioner.xml +++ /dev/null @@ -1,3 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> - diff --git a/nl/using-d-i/modules/partman-crypto.xml b/nl/using-d-i/modules/partman-crypto.xml deleted file mode 100644 index 233f98693..000000000 --- a/nl/using-d-i/modules/partman-crypto.xml +++ /dev/null @@ -1,355 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 56427 untranslated --> - - <sect3 id="partman-crypto"> - <title>Configuring Encrypted Volumes</title> -<para> - -&d-i; allows you to set up encrypted partitions. Every file you write -to such a partition is immediately saved to the device in encrypted -form. Access to the encrypted data is granted only after entering -the <firstterm>passphrase</firstterm> used when the encrypted -partition was originally created. This feature is useful to protect -sensitive data in case your laptop or hard drive gets stolen. The -thief might get physical access to the hard drive, but without knowing -the right passphrase, the data on the hard drive will look like random -characters. - -</para><para> - -The two most important partitions to encrypt are: the home partition, -where your private data resides, and the swap partition, where -sensitive data might be stored temporarily during operation. Of -course, nothing prevents you from encrypting any other partitions that might -be of interest. For example <filename>/var</filename> where database -servers, mail servers or print servers store their data, or -<filename>/tmp</filename> which is used by various programs to store -potentially interesting temporary files. Some people may even want to -encrypt their whole system. The only exception is -the <filename>/boot</filename> partition which must remain -unencrypted, because currently there is no way to load the kernel from -an encrypted partition. - -</para><note><para> - -Please note that the performance of encrypted partitions will be -less than that of unencrypted ones because the data needs to be -decrypted or encrypted for every read or write. The performance impact -depends on your CPU speed, chosen cipher and a key length. - -</para></note><para> - -To use encryption, you have to create a new partition by selecting -some free space in the main partitioning menu. Another option is to -choose an existing partition (e.g. a regular partition, an LVM logical -volume or a RAID volume). In the <guimenu>Partition settings</guimenu> -menu, you need to select <guimenuitem>physical volume for -encryption</guimenuitem> at the <menuchoice> <guimenu>Use -as:</guimenu> </menuchoice> option. The menu will then change to -include several cryptographic options for the partition. - -</para><para> - -&d-i; supports several encryption methods. The default method -is <firstterm>dm-crypt</firstterm> (included in newer Linux kernels, -able to host LVM physical volumes), the other -is <firstterm>loop-AES</firstterm> (older, maintained separately from -the Linux kernel tree). Unless you have compelling reasons to do -otherwise, it is recommended to use the default. - -<!-- TODO: link to the "Debian block device encryption guide" - once Max writes it :-) --> - -</para><para> - -First, let's have a look at the options available when you select -<userinput>Device-mapper (dm-crypt)</userinput> as the encryption -method. As always: when in doubt, use the defaults, because -they have been carefully chosen with security in mind. - -<variablelist> - -<varlistentry> -<term>Encryption: <userinput>aes</userinput></term> - -<listitem><para> - -This option lets you select the encryption algorithm -(<firstterm>cipher</firstterm>) which will be used to encrypt the data -on the partition. &d-i; currently supports the following block -ciphers: <firstterm>aes</firstterm>, <firstterm>blowfish</firstterm>, -<firstterm>serpent</firstterm>, and <firstterm>twofish</firstterm>. -It is beyond the scope of this document to discuss the qualities of -these different algorithms, however, it might help your decision to -know that in 2000, <emphasis>AES</emphasis> was chosen by the American -National Institute of Standards and Technology as the standard -encryption algorithm for protecting sensitive information in the 21st -century. - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>Key size: <userinput>256</userinput></term> - -<listitem><para> - -Here you can specify the length of the encryption key. With a larger -key size, the strength of the encryption is generally improved. On the -other hand, increasing the length of the key usually has a negative -impact on performance. Available key sizes vary depending on the -cipher. - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>IV algorithm: <userinput>cbc-essiv:sha256</userinput></term> - -<listitem><para> - -The <firstterm>Initialization Vector</firstterm> or -<firstterm>IV</firstterm> algorithm is used in cryptography to ensure -that applying the cipher on the same <firstterm>clear text</firstterm> -data with the same key always produces a unique -<firstterm>cipher text</firstterm>. The idea is to prevent the -attacker from deducing information from repeated patterns in the encrypted -data. - -</para><para> - -From the provided alternatives, the default -<userinput>cbc-essiv:sha256</userinput> is currently the least -vulnerable to known attacks. Use the other alternatives only when you -need to ensure compatibility with some previously installed system -that is not able to use newer algorithms. - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>Encryption key: <userinput>Passphrase</userinput></term> - -<listitem><para> - -Here you can choose the type of the encryption key for this partition. - - <variablelist> - <varlistentry> - <term>Passphrase</term> - <listitem><para> - -The encryption key will be computed<footnote> -<para> - -Using a passphrase as the key currently means that the partition will -be set up using <ulink url="&url-luks;">LUKS</ulink>. - -</para></footnote> on the basis of a passphrase which you will be able -to enter later in the process. - - </para></listitem> - </varlistentry> - - <varlistentry> - <term>Random key</term> - <listitem><para> - -A new encryption key will be generated from random data each time you -try to bring up the encrypted partition. In other words: on every -shutdown the content of the partition will be lost as the key is -deleted from memory. (Of course, you could try to guess the key with a -brute force attack, but unless there is an unknown weakness in the -cipher algorithm, it is not achievable in our lifetime.) - - </para><para> - -Random keys are useful for swap partitions because you do not need to -bother yourself with remembering the passphrase or wiping sensitive -information from the swap partition before shutting down your -computer. However, it also means that you -will <emphasis>not</emphasis> be able to use -the <quote>suspend-to-disk</quote> functionality offered by newer -Linux kernels as it will be impossible (during a subsequent boot) to -recover the suspended data written to the swap partition. - - </para></listitem> - </varlistentry> - </variablelist> - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>Erase data: <userinput>yes</userinput></term> - -<listitem><para> - -Determines whether the content of this partition should be overwritten -with random data before setting up the encryption. This is recommended -because it might otherwise be possible for an attacker to discern -which parts of the partition are in use and which are not. In -addition, this will make it harder to recover any leftover data from -previous installations<footnote><para> - -It is believed that the guys from three-letter agencies can restore -the data even after several rewrites of the magnetooptical media, -though. - -</para></footnote>. - -</para></listitem> -</varlistentry> - -</variablelist> - -</para><para> - -If you select <menuchoice> <guimenu>Encryption method:</guimenu> -<guimenuitem>Loopback (loop-AES)</guimenuitem> </menuchoice>, the menu -changes to provide the following options: - - -<variablelist> -<varlistentry> -<term>Encryption: <userinput>AES256</userinput></term> - -<listitem><para> - -For loop-AES, unlike dm-crypt, the options for cipher and key size are -combined, so you can select both at the same time. Please see the -above sections on ciphers and key sizes for further information. - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>Encryption key: <userinput>Keyfile (GnuPG)</userinput></term> - -<listitem><para> - -Here you can select the type of the encryption key for this partition. - - <variablelist> - <varlistentry> - <term>Keyfile (GnuPG)</term> - <listitem><para> - -The encryption key will be generated from random data during the -installation. Moreover this key will be encrypted -with <application>GnuPG</application>, so to use it, you will need to -enter the proper passphrase (you will be asked to provide one later in -the process). - - </para></listitem> - </varlistentry> - - <varlistentry> - <term>Random key</term> - <listitem><para> - -Please see the section on random keys above. - - </para></listitem> - </varlistentry> - </variablelist> - -</para></listitem> -</varlistentry> - -<varlistentry> -<term>Erase data: <userinput>yes</userinput></term> - -<listitem><para> - -Please see the the section on erasing data above. - -</para></listitem> -</varlistentry> - -</variablelist> - -</para><para> - -After you have selected the desired parameters for your encrypted -partitions, return back to the main partitioning menu. There should -now be a new menu item called <guimenu>Configure encrypted -volumes</guimenu>. After you select it, you will be asked to confirm -the deletion of data on partitions marked to be erased and possibly -other actions such as writing a new partition table. For large -partitions this might take some time. - -</para><para> - -Next you will be asked to enter a passphrase for partitions configured -to use one. Good passphrases should be longer than 8 characters, -should be a mixture of letters, numbers and other characters and -should not contain common dictionary words or information easily -associable with you (such as birthdates, hobbies, pet names, names of -family members or relatives, etc.). - -</para><warning><para> - -Before you input any passphrases, you should have made sure that your -keyboard is configured correctly and generates the expected -characters. If you are unsure, you can switch to the second virtual -console and type some text at the prompt. This ensures that you won't be -surprised later, e.g. by trying to input a passphrase using a qwerty -keyboard layout when you used an azerty layout during the installation. -This situation can have several causes. Maybe you switched to another -keyboard layout during the installation, or the selected keyboard layout -might not have been set up yet when entering the passphrase for the -root file system. - -</para></warning><para> - -If you selected to use methods other than a passphrase to create -encryption keys, they will be generated now. Because the kernel may -not have gathered a sufficient amount of entropy at this early stage -of the installation, the process may take a long time. You can help -speed up the process by generating entropy: e.g. by pressing random -keys, or by switching to the shell on the second virtual console and -generating some network and disk traffic (downloading some files, -feeding big files into <filename>/dev/null</filename>, etc.). - -<!-- TODO: Mention hardware random generators when we will support - them --> - -This will be repeated for each partition to be encrypted. - -</para><para> - -After returning to the main partitioning menu, you will see all -encrypted volumes as additional partitions which can be configured in -the same way as ordinary partitions. The following example shows two -different volumes. The first one is encrypted via dm-crypt, the second -one via loop-AES. - -<informalexample><screen> -Encrypted volume (<replaceable>sda2_crypt</replaceable>) - 115.1 GB Linux device-mapper - #1 115.1 GB F ext3 - -Loopback (<replaceable>loop0</replaceable>) - 515.2 MB AES256 keyfile - #1 515.2 MB F ext3 -</screen></informalexample> - -Now is the time to assign mount points to the volumes and optionally -change the file system types if the defaults do not suit you. - -</para><para> - -Pay attention to the identifiers in parentheses -(<replaceable>sda2_crypt</replaceable> -and <replaceable>loop0</replaceable> in this case) and the mount -points you assigned to each encrypted volume. You will need this -information later when booting the new system. The differences between -the ordinary boot process and the boot process with encryption involved will -be covered later in <xref linkend="mount-encrypted-volumes"/>. - -</para><para> - -Once you are satisfied with the partitioning scheme, continue with the -installation. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/partman-lvm.xml b/nl/using-d-i/modules/partman-lvm.xml deleted file mode 100644 index ca0c46716..000000000 --- a/nl/using-d-i/modules/partman-lvm.xml +++ /dev/null @@ -1,98 +0,0 @@ -<!-- original version: 56326 --> - - <sect3 id="partman-lvm"> - <title>Logisch volumebeheer (LVM) instellen</title> -<para> - -Als u met computers werkt op het niveau van systeembeheerder of -<quote>gevorderde</quote> gebruiker, heeft u vast de situatie meegemaakt -waar op een partitie (meestal de meest belangrijke) onvoldoende ruimte -beschikbaar was, terwijl een andere partitie grotendeels ongebruikt was. -Als oplossing heeft u mogelijk bestanden moeten verplaatsen met symbolische -verwijzingen vanaf de oude lokatie. - -</para><para> - -Om deze situatie te voorkomen, kunt u gebruik maken van Logisch volumebeheer -(Logical Volume Management — LVM). Met LVM kunt u uw partities (in de -terminologie van LVM <firstterm>fysieke volumes</firstterm>) combineren tot -een virtuele harde schijf (ofwel <firstterm>volumegroep</firstterm>); deze -kan op zijn beurt worden opgedeeld in virtuele partities (<firstterm>logische -volumes</firstterm>). Het nut hiervan is dat logische volumes (en natuurlijk -ook de onderliggende volumegroepen) verschillende fysieke harde schijven -kunnen omvatten. - -</para><para> - -Als u bijvoorbeeld vervolgens ontdekt dat u meer ruimte nodig heeft op uw -oude 160GB <filename>/home</filename> partitie, kunt u eenvoudig een extra -300GB harde schijf in de computer plaatsen, deze toevoegen in uw bestaande -volumegroep en vervolgens het logische volume vergroten waarop uw -<filename>/home</filename> bestandssysteem zich bevindt. En klaar is Kees: uw -gebruikers kunnen beschikken over de extra ruimte op een vernieuwde partitie -van 460GB. Dit voorbeeld is uiteraard enigszins gesimplificeerd. Wij raden u -aan om, voor zover u dat nog niet heeft gedaan, de -<ulink url="&url-lvm-howto;">LVM HOWTO</ulink> te raadplegen. - -</para><para> - -Het instellen van LVM in &d-i; is relatief eenvoudig en volledig ondersteund -in <command>partman</command>. Allereerst dient u de partitie(s) die u wilt -gebruiken als fysieke volumes voor LVM, te markeren. -Hiervoor selecteert u in <command>partman</command> -vanuit het menu <guimenu>Partitie-instellingen</guimenu> -de optie <menuchoice> <guimenu>Gebruiken als:</guimenu> -<guimenuitem>Fysiek volume voor LVM</guimenuitem> </menuchoice>. - -</para><para> - -Als u terugkeert op het hoofdscherm van <command>partman</command>, zult u -een nieuwe optie <guimenuitem>Logisch volumebeheer (LVM) instellen</guimenuitem>. -Als u deze selecteert, zal u eerst worden gevraagd om nog niet vastgelegde -wijzigingen in de partitietabel te bevestigen (als die er zijn) en vervolgens -zal het configuratiemenu voor LVM worden getoond. Het menu is contextgevoelig -en toont alleen toegestane acties. De mogelijke acties zijn: - -<itemizedlist> - <listitem><para> - <guimenuitem>Toon configuratiedetails</guimenuitem>: - toont onder andere de structuur van LVM-elementen en de namen en groottes - van logische volumes - </para></listitem> - <listitem><para> - <guimenuitem>Volumegroep aanmaken</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Logisch volume aanmaken</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Volumegroep verwijderen</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Logisch volume verwijderen</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Volumegroep uitbreiden</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Volumegroep verkleinen</guimenuitem> - </para></listitem> - <listitem><para> - <guimenuitem>Einde</guimenuitem>: - keer terug naar het hoofdscherm van <command>partman</command> - </para></listitem> -</itemizedlist> - -</para><para> - -Gebruik de opties in dit menu om eerst een volume groep en vervolgens -daaronder de gewenste logische volumes. - -</para><para> - -Als u wederom terugkeert op het hoofdscherm van <command>partman</command>, -zult u de aangemaakte logische volumes als ware het gewone partities -terugvinden in het menu (en u kunt ze verder ook als zodanig behandelen). - -</para> - </sect3> diff --git a/nl/using-d-i/modules/partman.xml b/nl/using-d-i/modules/partman.xml deleted file mode 100644 index 76389e9ed..000000000 --- a/nl/using-d-i/modules/partman.xml +++ /dev/null @@ -1,240 +0,0 @@ -<!-- original version: 39529 --> - -<para> - -Als u weinig ervaring heeft met het indelen van schijven of gewoon meer -gedetailleerde informatie wenst, kunt u <xref linkend="partitioning"/> -raadplegen. - -</para><para> - -Allereerst zal u de gelegenheid worden geboden om een gehele harde schijf, -of (indien aanwezig) de beschikbare vrije ruimte op een schijf, automatisch -in te delen. -Dit wordt <quote>begeleide schijfindeling</quote> genoemd. Als u dit niet -wenst, kies dan de optie <guimenuitem>Schijfindeling handmatig -bepalen</guimenuitem> uit het menu. - -</para> - - <sect3 id="partman-auto"> - <title>Begeleide schijfindeling</title> -<para> - -Als u kiest voor begeleide schijfindeling, heeft u mogelijk twee opties: -de partities direct op de harde schijf aanmaken (de klassieke methode) of -gebruik maken van logisch volumebeheer (LVM). In het tweede geval zal het -installatiesysteem de meeste partities aanmaken binnen één grote overkoepelende -partitie; het voordeel van deze methode is dat de grootte van de partities -binnen die overkoepelende partitie relatief eenvoudig kan worden gewijzigd. -Merk op dat de optie om gebruik te maken van LVM niet op alle platforms -beschikbaar hoeft te zijn. - -</para> -<warning><para> - -Als u kiest voor begeleide schijfindeling met gebruik van LVM, zal het -niet mogelijk zijn om wijzigingen in de partitietabel ongedaan te maken. -Met deze keuze worden effectief alle gegevens verwijderd die zich nu op -de harde schijf bevinden - -</para></warning> -<para> - -Nadat u heeft gekozen voor begeleide schijfindeling (klassieke methode -danwel met gebruik van LVM), kunt u een keuze maken uit de schema's -weergegeven in onderstaande tabel. Elk van deze schema's -heeft zijn voor- en nadelen, waarvan een aantal wordt besproken in -<xref linkend="partitioning"/>. Als u twijfelt, kies dan de eerste optie. -Merk op dat begeleide schijfindeling een zekere minimale vrije schijfruimte -nodig heeft om te kunnen werken. Als u niet tenminste ongeveer 1GB ruimte -(afhankelijk van het gekozen schema) beschikbaar heeft, zal de begeleide -schijfindeling mislukken. - -</para> - -<informaltable> -<tgroup cols="3"> -<thead> -<row> - <entry>Schema voor schijfindeling</entry> - <entry>Minimale ruimte</entry> - <entry>Aangemaakte partities</entry> -</row> -</thead> - -<tbody> -<row> - <entry>Alles in één partitie</entry> - <entry>600MB</entry> - <entry><filename>/</filename>, swap</entry> -</row><row> - <entry>Afzonderlijke /home partitie</entry> - <entry>500MB</entry> - <entry> - <filename>/</filename>, <filename>/home</filename>, swap - </entry> -</row><row> - <entry>Afzonderlijke /home, /usr, /var en /tmp partities</entry> - <entry>1GB</entry> - <entry> - <filename>/</filename>, <filename>/home</filename>, - <filename>/usr</filename>, <filename>/var</filename>, - <filename>/tmp</filename>, swap - </entry> -</row> - -</tbody></tgroup></informaltable> - -<para> - -Als u kiest voor begeleide schijfindeling met gebruik van LVM, dan zal het -installatiesysteem ook een afzonderlijke <filename>/boot</filename> partitie -aanmaken. Alle andere partities, met uitzondering van de wisselgeheugen (swap) -partitie, zullen worden aangemaakt in de LVM partitie. - -</para><para arch="ia64"> - -Als u voor uw IA64 systeem kiest voor begeleide schijfindeling, zal een -extra partitie, geformatteerd met een FAT16 opstartbaar bestandssysteem, -worden aangemaakt ten behoeve van de EFI-opstartlader. -Er is ook een aanvullende menuoptie in het keuzemenu met formateeropties -om handmatig een EFI-opstartpartitie te kunnen aanmaken. - -</para><para> - -Nadat u een schema heeft geselecteerd, zal op het volgende scherm de -nieuwe partitie-indeling worden getoond met daarbij indicaties of en -hoe deze geformatteerd zullen worden en op welke aanhechtpunten ze -gekoppeld zullen worden. - -</para><para> - -De partitie-indeling zou er als volgt uit kunnen zien: - -<informalexample><screen> - IDE1 master (hda) - 6.4 GB WDC AC36400L - #1 primair 16.4 MB B f ext2 /boot - #2 primair 551.0 MB swap swap - #3 primair 5.8 GB ntfs - pri/log 8.2 MB VRIJE RUIMTE - - IDE1 slave (hdb) - 80.0 GB ST380021A - #1 primair 15.9 MB ext3 - #2 primair 996.0 MB fat16 - #3 primair 3.9 GB xfs /home - #5 logisch 6.0 GB f ext3 / - #6 logisch 1.0 GB f ext3 /var - #7 logisch 498.8 MB ext3 - #8 logisch 551.5 MB swap swap - #9 logisch 65.8 GB ext2 -</screen></informalexample> - -Dit voorbeeld toont twee IDE harde schijven die zijn opgedeeld in -verschillende partities; de eerste schijf heeft nog vrije ruimte. Elke -regel voor een partitie bevat de volgende informatie: partitienummer, -type en grootte van de partitie, wijzigingindicatoren, het bestandssysteem -en het aanhechtpunt (indien aanwezig) voor de partitie. -Merk op dat de hier weergegeven indeling niet kan worden gerealiseerd met -behulp van begeleide schijfindeling; zij toont echter wel de flexibiliteit -die kan worden bereikt met handmatige schijfindeling. -<!-- FJP: De wijzigingindicatoren zijn de smileys die aangeven wat er - met een partitie gat gebeuren. Dit moet nog worden uitgewerkt.--> - -</para><para> - -Hiermee is de begeleide schijfindeling voltooid. Als u tevreden bent met de -voorgestelde indeling, kunt u de menuoptie <guimenuitem>Schijfindeling -afsluiten & veranderingen naar schijf schrijven</guimenuitem> kiezen om -de nieuwe partitie-indeling te implementeren (zoals beschreven aan het einde -van deze paragraaf). Als u nog niet tevreden bent, kunt u kiezen voor -<guimenuitem>Veranderingen aan partities ongedaan maken</guimenuitem> en de -begeleide schijfindeling nogmaals uit te voeren of om de voorgestelde indeling -te wijzigen zoals hieronder beschreven voor handmatige schijfindeling. - -</para> - </sect3> - - <sect3 id="partman-manual"> - <title>Handmatige schijfindeling</title> -<para> - -Als u kiest voor handmatige schijfindeling, zal een vergelijkbaar scherm -worden getoond als hiervoor weergegeven, maar dan met uw bestaande -partitie-indeling en nog zonder aanhechtpunten. Hoe u de schijfindeling -en het gebruik van partities voor uw nieuwe &debian; systeem handmatig kunt -instellen, wordt hieronder behandeld. - -</para><para> - -Als een een nog maagdelijke schijf (waarop nog geen partities of vrije -ruimte gedefinieerd is) selecteert, zal u de mogelijkheid krijgen om een -nieuwe partitietabel te creëren (deze is nodig om partities te kunnen -aanmaken). Daarna behoort onder de geselecteerde schijf een nieuwe regel -met <quote>VRIJE RUIMTE</quote> te verschijnen. - -</para><para> - -Als u een regel met vrije ruimte selecteert, kunt u een nieuwe partitie -creëren. U zult een korte serie vragen over grootte, type (primair of -logisch) en positie (aan het begin of einde van de vrije ruimte) moeten -beantwoorden. Daarna krijgt u een gedetailleerd overzicht van de nieuwe -partitie. Daarin vindt u als aanhechtpunt, aankoppelopties, de indicatie of -de partitie opstartbaar moet zijn, en typisch gebruik. Als de -standaardwaarden u niet bevallen, kunt u ze naar behoefte wijzigen. Door -bijvoorbeeld de optie <guimenuitem>Gebruiken als:</guimenuitem> te selecteren, -kunt u een ander bestandssysteem voor de partitie selecteren, inclusief de -mogelijkheid om de partitie te gebruiken voor wisselgeheugen ('swap'), als -onderdeel van software RAID of LVM, of om de partitie helemaal niet te -gebruiken. Een andere aardige optie is de mogelijkheid om gegevens vanaf -een andere partitie naar de nieuwe partitie te kopiëren. -Als u tevreden bent met de nieuwe partitie kiest u <guimenuitem>Klaar met -instellen van partitie</guimenuitem> waarna u terugkeert naar het hoofdmenu -van <command>partman</command>. - -</para><para> - -Als u een instelling van een partitie wilt wijzigen, selecteert u -deze gewoon waarna u in het configuratiemenu voor de partitie komt. -Dit is hetzelfde scherm als bij het aanmaken van een nieuwe partitie en -u kunt dus dezelfde serie instellingen wijzigen. Iets dat mogelijk niet -meteen duidelijk is, is dat u de grootte van een partitie kunt wijzigen -door de regel met de grootte van de partitie te selecteren. -Bestandssystemen waarvan bekend is dat dit werkt zijn in ieder geval -fat16, fat32, ext2, ext3 en swap. Dit menu stelt u ook in staat om een -partitie te verwijderen. - -</para><para> - -Zorg ervoor dat u tenminste twee partities aanmaakt: één voor het -<emphasis>root</emphasis>-bestandssysteem (dat gekoppeld moet worden -aan het aanhechtpunt <filename>/</filename>) en één voor -<emphasis>swap</emphasis>. Als u vergeet om het root-bestandssysteem -aan te koppelen, zal <command>partman</command> u niet verder laten gaan -tot dit probleem is verholpen. - -</para><para arch="ia64"> - -Als u vergeet om een EFI-opstartpartitie te selecteren en formatteren, zal -<command>partman</command> dit signaleren en u beletten verder te gaan tot -u er een heeft toegewezen. - -</para><para> - -De functionaliteit van <command>partman</command> kan worden vergroot -met behulp van installatiesysteemmodules, maar is afhankelijk van het -platform waartoe uw systeem behoort. Als u dus niet alle beschreven -mogelijkheden ziet, controleer dan of alle vereiste modules (zoals -<filename>partman-ext3</filename>, <filename>partman-xfs</filename>, -of <filename>partman-lvm</filename>) zijn geladen. - -</para><para> - -Als u tevreden bent met het eindresultaat van de schijfindeling, kiest u -de menuoptie <guimenuitem>Schijfindeling afsluiten & veranderingen naar -schijf schrijven</guimenuitem>. Daarna zal een overzicht worden getoond van -de wijzigingen in de schijfindeling en zal u worden gevraagd om deze te -bevestigen voordat de gewenste wijzigingen worden doorgevoerd. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/pkgsel.xml b/nl/using-d-i/modules/pkgsel.xml deleted file mode 100644 index 408377216..000000000 --- a/nl/using-d-i/modules/pkgsel.xml +++ /dev/null @@ -1,70 +0,0 @@ -<!-- original version: 35518 --> - - <sect3 id="pkgsel"> - <title>Software selecteren en installeren</title> - -<para> - -Tijdens de installatie wordt de mogelijkheid geboden om aanvullende -programmatuur te installeren. In plaats van het selecteren van individuele -softwarepakketten uit de &num-of-distrib-pkgs; beschikbare pakketten, ligt -de nadruk tijdens deze fase van de installatie op het selecteren en installeren -van vooraf gedefinieerde verzamelingen van programmatuur waarmee uw computer -snel kan worden ingericht voor het uitvoeren van diverse taken. - -</para><para> - -U heeft dus de mogelijkheid om allereerst <emphasis>taken</emphasis> te -selecteren en vervolgens daaraan individuele pakketten toe te voegen. -Globaal vertegenwoordigen deze taken verschillende doeleinden waarvoor u -uw computer zou kunnen gebruiken, zoals <quote>Desktopomgeving</quote>, -<quote>Webserver</quote> of <quote>Printserver</quote><footnote> - -<para> - -Door <command>base-config</command> wordt om deze lijst te tonen het programma <command>tasksel</command> aangeroepen. Voor handmatige pakketselectie wordt -het programma <command>aptitude</command> uitgevoerd. Elk van deze programma's -kunt u na de installatie op elk gewenst moment zelf uitvoeren om extra pakketten -te installeren (of te verwijderen). Als u, nadat de installatie voltooid is, op -zoek bent naar een specifiek pakket, kunt u eenvoudig <userinput>aptitude -install <replaceable>pakket</replaceable></userinput> uitvoeren, waarbij -<replaceable>pakket</replaceable> de naam is van het pakket dat u zoekt. - -</para> - -</footnote>. In <xref linkend="tasksel-size-list"/> is een overzicht opgenomen -van de voor de beschikbare taken benodigde ruimte. - -</para><para> - -Nadat u de gewenste taken heeft geselecteerd, selecteert u <guibutton>Ok</guibutton>. -Vervolgens zal de installatie van de pakketten die behoren bij de door u -geselecteerde taken, plaatsvinden met behulp van <command>aptitude</command>. - -<note><para> - -Bij de standaard gebruikersinterface van het installatiesysteem kunt u de -spatiebalk gebruiken een taak te (de)selecteren. - -</para></note> - -<note><para> - -Merk op dat sommige taken reeds automatisch geselecteerd kunnen zijn -(afhankelijk van eigenschappen van het systeem waarop de installatie wordt -uitgevoerd). Als u het met deze selectie niet eens bent, kunt u deze ongedaan -maken. U kunt er zelfs voor kiezen om geen enkele taak te installeren. - -</para></note> - -</para><para> - -Elk pakket dat u met behulp van <command>tasksel</command> heeft -geselecteerd, wordt gedownload, uitgepakt en vervolgens geïnstalleerd -door achtereenvolgens de programma's <command>apt-get</command> en -<command>dpkg</command>. Als een bepaald programma aanvullende informatie -van de gebruiker nodig heeft, zal hierom tijdens dit proces worden -gevraagd. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/powerpc/quik-installer.xml b/nl/using-d-i/modules/powerpc/quik-installer.xml deleted file mode 100644 index ed6aa6a60..000000000 --- a/nl/using-d-i/modules/powerpc/quik-installer.xml +++ /dev/null @@ -1,15 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14975 untranslated --> - - <sect3 arch="powerpc"> - <title>Install <command>Quik</command> on a Hard Disk</title> -<para> - -The boot loader for OldWorld Power Macintosh machines is -<command>quik</command>. You can also use it on CHRP. The installer -will attempt to set up <command>quik</command> automatically. The -setup has been known to work on 7200, 7300, and 7600 Powermacs, and on -some Power Computing clones. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/powerpc/yaboot-installer.xml b/nl/using-d-i/modules/powerpc/yaboot-installer.xml deleted file mode 100644 index fdbf1edcb..000000000 --- a/nl/using-d-i/modules/powerpc/yaboot-installer.xml +++ /dev/null @@ -1,17 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14975 untranslated --> - - <sect3 arch="powerpc"> - <title>Install <command>Yaboot</command> on a Hard Disk</title> -<para> - -Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as -their boot loader. The installer will set up <command>yaboot</command> -automatically, so all you need is a small 820k partition named -<quote>bootstrap</quote> with type -<emphasis>Apple_Bootstrap</emphasis> created back in the partitioning -component. If this step completes successfully then your disk should -now be bootable and OpenFirmware will be set to boot &debian-gnu;. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/s390/dasd.xml b/nl/using-d-i/modules/s390/dasd.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/s390/dasd.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/s390/netdevice.xml b/nl/using-d-i/modules/s390/netdevice.xml deleted file mode 100644 index 5c156a8fa..000000000 --- a/nl/using-d-i/modules/s390/netdevice.xml +++ /dev/null @@ -1,2 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 11648 untranslated --> diff --git a/nl/using-d-i/modules/s390/zipl-installer.xml b/nl/using-d-i/modules/s390/zipl-installer.xml deleted file mode 100644 index 61aa6465c..000000000 --- a/nl/using-d-i/modules/s390/zipl-installer.xml +++ /dev/null @@ -1,16 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 14602 untranslated --> - - <sect3 arch="s390"> - <title><command>zipl</command>-installer</title> -<para> - -The boot loader on &arch-title; is <quote>zipl</quote>. -<command>ZIPL</command> is similar in configuration and usage to -<command>LILO</command>, with a few exceptions. Please take a look at -<quote>LINUX for &arch-title; Device Drivers and Installation -Commands</quote> from IBM's developerWorks web site if you want to -know more about <command>ZIPL</command>. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/save-logs.xml b/nl/using-d-i/modules/save-logs.xml deleted file mode 100644 index 7c0c1fe1a..000000000 --- a/nl/using-d-i/modules/save-logs.xml +++ /dev/null @@ -1,23 +0,0 @@ -<!-- original version: 33725 --> - - <sect3 id="save-logs"> - <title>De logbestanden van de installatie bewaren</title> - -<para> - -Als de installatie succesvol is, worden de logbestanden die tijdens -het installatieproces zijn aangemaakt, automatisch opgeslagen in de -map <filename>/var/log/debian-installer/</filename> op uw nieuwe -&debian; systeem. - -</para><para> - -De optie <guimenuitem>Debug-logbestanden opslaan</guimenuitem> in -het hoofdmenu biedt u de mogelijkheid om de logbestanden op een -diskette, via het netwerk, op harde schijf of op een ander medium te -bewaren. Dit kan nuttig zijn als u onoverkomelijke problemen tegenkomt -tijdens de installatie en u de logbestanden op een ander systeem wilt -bestuderen of u ze wilt meesturen met een installatierapport. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/shell.xml b/nl/using-d-i/modules/shell.xml deleted file mode 100644 index 356b3cfaa..000000000 --- a/nl/using-d-i/modules/shell.xml +++ /dev/null @@ -1,42 +0,0 @@ -<!-- original version: 21579 --> - - <sect3 id="shell"> - <title>Een shell gebruiken en de logs bekijken</title> - -<para> - -In het hoofdmenu is een optie <guimenuitem>Een shell openen</guimenuitem> -aanwezig. Als het menu niet beschikbaar is op het moment dat u gebruik -wilt maken van een shell, kunt u op <keycombo><keycap>Linker Alt</keycap> -<keycap>F2</keycap></keycombo> (op een Mac-toetsenbord: -<keycombo><keycap>Option</keycap> <keycap>F2</keycap></keycombo>) indrukken -om naar de tweede <emphasis>virtuele</emphasis> terminal te schakelen. Dat -wil zeggen de toets <keycap>Alt</keycap> (links van de -<keycap>spatiebalk</keycap>) en de functietoets <keycap>F2</keycap> -tegelijkertijd indrukken. Dit is een afzonderlijk scherm waarin de shell -<command>ash</command>, een kloon van de Bourne-shell, draait - -</para><para> - -Op dat punt is uw systeem opgestart vanaf een RAM-schijf en heeft u een -beperkte set van Unix hulpprogramma's beschikbaar. U kunt zien welke -programma's beschikbaar zijn door het commando <command>ls /bin /sbin -/usr/bin /usr/sbin</command> te geven en door <command>help</command> -te typen. De tekstverwerker is <command>nano</command>. De shell heeft een -aantal aardige functies zoals het automatisch voltooien van commando's en -bestandsnamen en een opdrachthistorie. -<!-- FJP: is er een kortere vertaling voor 'autocompletion'? --> - -</para><para> - -Gebruik echter de menu's om de taken van het installatiesysteem uit te -voeren — de shell en commando's zijn er uitsluitend voor het geval -er iets mis gaat. U dient in het bijzonder altijd het menu, en niet de -shell, te gebruiken om wisselgeheugen te activeren De reden hiervoor is -dat het installatiesysteem dit niet kan signaleren als u dit vanuit de -shell doet. Druk op <keycombo><keycap>Linker Alt</keycap> -<keycap>F1</keycap></keycombo> om terug te keren naar de menu's, of type -<command>exit</command>, als u de shell heeft gestart met de menuoptie. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/sparc/silo-installer.xml b/nl/using-d-i/modules/sparc/silo-installer.xml deleted file mode 100644 index 3ce2b6ac6..000000000 --- a/nl/using-d-i/modules/sparc/silo-installer.xml +++ /dev/null @@ -1,25 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 24582 untranslated --> - - <sect3 arch="sparc"> - <title>Install the <command>SILO</command> Boot Loader - on a Hard Disk</title> -<para> - -The standard &architecture; boot loader is called <quote>silo</quote>. -It is documented in -<filename>/usr/share/doc/silo/</filename>. <command>SILO</command> is -similar in configuration and usage to <command>LILO</command>, with -a few exceptions. First of all, <command>SILO</command> allows you to -boot any kernel image on your drive, even if it is not listed in -<filename>/etc/silo.conf</filename>. This is because -<command>SILO</command> can actually read Linux partitions. Also, -<filename>/etc/silo.conf</filename> is read at boot time, so there is -no need to rerun <command>silo</command> after installing a new kernel -like you would with <command>LILO</command>. <command>SILO</command> -can also read UFS partitions, which means it can boot SunOS/Solaris -partitions as well. This is useful if you want to install GNU/Linux -alongside an existing SunOS/Solaris install. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/tzsetup.xml b/nl/using-d-i/modules/tzsetup.xml deleted file mode 100644 index d68fc5300..000000000 --- a/nl/using-d-i/modules/tzsetup.xml +++ /dev/null @@ -1,54 +0,0 @@ -<!-- original version: 50620 --> - -<para> - -Afhankelijk van de eerder geselecteerde locatie, kan een keuzelijst met -tijdzones relevant voor die lokatie worden getoond. Als voor uw locatie -slechts één tijdzone relevant is, zal niets worden gevraagd maar wordt -de betreffende tijdzone automatisch ingesteld. - -</para><para> - -Als u, om wat voor reden dan ook, een tijdzone wilt instellen die -<emphasis>niet</emphasis> past bij de geselecteerde locatie, dan zijn er -twee opties. - -</para> - -<orderedlist> -<listitem> - -<para> - -De meest eenvoudige optie is om gewoon een andere tijdzone in te stellen -nadat de installatie is afgerond en u uw nieuwe systeem heeft opgestart. -Het juiste commando hiervoor is: - -<informalexample><screen> -# dpkg-reconfigure tzdata -</screen></informalexample> - -</para> - -</listitem><listitem> - -<para> - -Een alternatieve mogelijkheid is om de tijdzone helemaal aan het begin van -de installatie op te geven door de parameter -<userinput>time/zone=<replaceable>waarde</replaceable></userinput> -mee te geven bij het opstarten van het installatiesysteem. -De waarde dient uiteraard een geldige tijdzone te zijn, zoals -<userinput>Europe/Amsterdam</userinput> of <userinput>UTC</userinput>. - -</para> - -</listitem> -</orderedlist> - -<para> - -Voor geautomatiseerde installaties kan de tijdzone ook worden ingesteld door -gebruikmaking van voorconfiguratie. - -</para> diff --git a/nl/using-d-i/modules/user-setup.xml b/nl/using-d-i/modules/user-setup.xml deleted file mode 100644 index b39dba31e..000000000 --- a/nl/using-d-i/modules/user-setup.xml +++ /dev/null @@ -1,70 +0,0 @@ -<!-- original version: 50618 --> - - <sect3 id="user-setup-root"> - <title>Het wachtwoord voor root instellen</title> - -<para> - -Het <emphasis>root</emphasis>-account wordt ook wel de -<emphasis>super-user</emphasis> genoemd; het is een login die alle -beveiligingen op uw systeem omzeilt. Het root-account dient alleen te -worden gebruikt voor systeemadministratie en altijd gedurende een zo -kort mogelijke tijd. - -</para><para> - -Elk wachtwoord dat u aanmaakt zou uit tenminste 6 tekens moeten bestaan en -zou zowel hoofd- als kleine letters als ook leestekens moeten bevatten. -Wees extra zorgvuldig als u het wachtwoord voor root instelt, aangezien -dit account zoveel rechten geeft. Vermijd woorden die voorkomen in -woordenboeken en het gebruik van persoonlijke gegevens die eenvoudig kunnen -worden geraden. -<!-- FJP: vermelden dat wachtwoorden tijdens invoer onleesbaar zijn en daarom -twee keer moeten worden ingevoerd? //--> - -</para><para> - -Wees zeer argwanend als iemand u ooit vertelt dat hij het wachtwoord -van uw root-account nodig heeft. Normaalgesproken zou u het wachtwoord voor -uw root-account nooit mogen uitgeven, tenzij u een machine beheert die meer -dan één systeembeheerder heeft. -<!-- FJP: noemen alternatieven: su, sudo //--> - -</para> - </sect3> - - <sect3 id="make-normal-user"> - <title>Een gewone gebruiker aanmaken</title> - -<para> - -Het systeem zal u op dit punt ook vragen of u een gewoon gebruikersaccount -wilt aanmaken. Dit account is voor u de normale manier om aan te loggen. -Het is <emphasis>niet</emphasis> de bedoeling dat u het root-account benut -voor dagelijks gebruik of als uw persoonlijke login. - -</para><para> - -Waarom niet? Wel, één reden om het gebruik van de privileges van root te -vermijden is dat het zeer eenvoudig is om als root onherstelbare schade -aan te richten. Een andere reden is dat u verleid zou kunnen worden om een -<emphasis>Trojaans-paard</emphasis> te draaien — een programma dat -misbruik maakt van uw rechten als super-user om achter uw rug de beveiliging -van uw systeem de doorbreken. In elk degelijk boek over systeembeheer voor -Unix wordt meer uitgebreid ingegaan op dit onderwerp — overweeg om er -één te lezen als dit nieuw voor u is. - -</para><para> - -U zult eerst worden gevraagd om de volledige naam van de gebruiker in te voeren. -Vervolgens wordt u gevraagd om de naam voor het gebruikersaccount; in het -algemeen is uw voornaam (de standaardwaarde) of iets dergelijks afdoende. -Tot slot zal een wachtwoord voor dit account worden gevraagd. - -</para><para> - -Als u op enig moment na de installatie nog een gebruikersaccount wilt -aanmaken, kunt u het commando <command>adduser</command> gebruiken. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/x86/grub-installer.xml b/nl/using-d-i/modules/x86/grub-installer.xml deleted file mode 100644 index 9c654d539..000000000 --- a/nl/using-d-i/modules/x86/grub-installer.xml +++ /dev/null @@ -1,25 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 46722 untranslated --> - - <sect3 arch="any-x86"> - <title>Install the <command>Grub</command> Boot Loader - on a Hard Disk</title> -<para> - -The main &architecture; boot loader is called <quote>grub</quote>. -Grub is a flexible and robust boot loader and a good default choice for -new users and old hands alike. - -</para><para> - -By default, grub will be installed into the Master Boot Record (MBR), where -it will take over complete control of the boot process. If you prefer, you -can install it elsewhere. See the grub manual for complete information. - -</para><para> - -If you do not want to install grub, use the &BTN-GOBACK; button to get to the -main menu, and from there select whatever bootloader you would like to use. - -</para> - </sect3> diff --git a/nl/using-d-i/modules/x86/lilo-installer.xml b/nl/using-d-i/modules/x86/lilo-installer.xml deleted file mode 100644 index 89cc7f37e..000000000 --- a/nl/using-d-i/modules/x86/lilo-installer.xml +++ /dev/null @@ -1,67 +0,0 @@ -<!-- retain these comments for translator revision tracking --> -<!-- original version: 49849 untranslated --> - - <sect3 arch="x86"> - <title>Install the <command>LILO</command> Boot Loader - on a Hard Disk</title> -<para> - -The second &architecture; boot loader is called <quote>LILO</quote>. -It is an old complex program which offers lots of functionality, -including DOS, Windows, and OS/2 boot management. Please carefully -read the instructions in the directory -<filename>/usr/share/doc/lilo/</filename> if you have special needs; -also see the <ulink url="&url-lilo-howto;">LILO mini-HOWTO</ulink>. - -</para> -<note><para> - -Currently the LILO installation will only create menu entries for other -operating systems if these can be <firstterm>chainloaded</firstterm>. -This means you may have to manually add a menu entry for operating -systems like GNU/Linux and GNU/Hurd after the installation. - -</para></note> -<para> - -&d-i; offers you three choices on where to install the -<command>LILO</command> boot loader: - -<variablelist> -<varlistentry> -<term>Master Boot Record (MBR)</term><listitem><para> - -This way the <command>LILO</command> will take complete control of the -boot process. - -</para></listitem></varlistentry> -<varlistentry> -<term>new &debian; partition</term><listitem><para> - -Choose this if you want to use another boot -manager. <command>LILO</command> will install itself at the beginning -of the new &debian; partition and it will serve as a secondary boot -loader. - -</para></listitem></varlistentry> -<varlistentry> -<term>Other choice</term><listitem><para> - -Useful for advanced users who want to install <command>LILO</command> -somewhere else. In this case you will be asked for desired -location. You can use traditional device names such as -<filename>/dev/hda</filename> or <filename>/dev/sda</filename>. - -</para></listitem></varlistentry> -</variablelist> - -</para><para> - -If you can no longer boot into Windows 9x (or DOS) after this step, -you'll need to use a Windows 9x (MS-DOS) boot disk and use the -<userinput>fdisk /mbr</userinput> command to reinstall the MS-DOS -master boot record — however, this means that you'll need to use -some other way to get back into &debian;! - -</para> - </sect3> diff --git a/nl/using-d-i/using-d-i.xml b/nl/using-d-i/using-d-i.xml deleted file mode 100644 index 0cb8ec429..000000000 --- a/nl/using-d-i/using-d-i.xml +++ /dev/null @@ -1,418 +0,0 @@ -<!-- original version: 56428 --> - - <chapter id="d-i-intro"><title>Het &debian; installatiesysteem gebruiken</title> - - <sect1><title>Hoe het installatiesysteem werkt</title> -<para> - -Het &debian; installatiesysteem bestaat uit een aantal modules die -zijn ontwikkeld om een specifieke taak uit te voeren tijdens de installatie. -Elke module voert zijn taak uit, waarbij vragen kunnen worden gesteld -aan de gebruiker als dat voor die taak nodig is. Aan de vragen zelf is -een prioriteit toegekend, en de prioriteit van de vragen die zullen worden -gesteld wordt ingesteld bij het opstarten van het installatiesysteem. - -</para><para> - -Als een standaard installatie wordt uitgevoerd, zullen alleen essentiële -vragen (met prioriteit HIGH) worden gesteld. Het resultaat is een in hoge -mate geautomatiseerd installatieproces met weinig interactie met de -gebruiker. Modules worden vanzelf in de juiste volgorde uitgevoerd; -welke modules worden uitgevoerd wordt hoofdzakelijk bepaald door de -gekozen installatiemethode en door uw apparatuur. Het installatiesysteem -zal standaard antwoorden gebruiken voor vragen die niet worden gesteld. - -</para><para> - -Als er een probleem optreedt, wordt een scherm met een foutboodschap getoond -en kan het menu van het installatiesysteem worden getoond zodat de gebruiker -een alternatieve actie kan selecteren. Als er geen problemen zijn, zal de -gebruiker het menu van het installatiesysteem nooit zien, maar eenvoudig de -vragen voor iedere opeenvolgende module kunnen beantwoorden. Meldingen van -kritische fouten hebben een prioriteit CRITICAL waardoor de gebruiker altijd -geïnformeerd zal worden. -<!-- FJP Prioriteiten in caps (gebeurt ook later in tekst) //--> - -</para><para> - -Enkele van de standaard waarden die het installatiesysteem gebruikt, kunnen -worden gestuurd door opstartparameters mee te geven bij het starten van &d-i;. -Als u bijvoorbeeld statische netwerkconfiguratie wilt forceren (standaard wordt -DHCP gebruikt indien dit beschikbaar is), kunt u de opstartparameter -<userinput>netcfg/disable_dhcp=true</userinput> toevoegen. Zie -<xref linkend="installer-args"/> voor een overzicht van beschikbare opties. - -</para><para> - -Het is mogelijk dat gevorderde gebruikers zich meer thuis voelen met een -menugestuurde interface, waarbij niet het installatiesysteem automatisch -elke stap in volgorde uitvoert maar elke stap door de gebruiker zelf -wordt bepaald. Om het installatiesysteem op een handmatige, menugestuurde -manier uit te voeren, moet de opstartparameter -<userinput>priority=medium</userinput> worden toegevoegd. - -</para><para> - -Als het voor uw apparatuur noodzakelijk is om parameters mee te geven bij de -installatie van kernelmodules, dan zal u het installatiesysteem moeten starten -in de <quote>expert</quote> modus. Dit is mogelijk door voor het opstarten -van het installatiesysteem ofwel het commando <command>expert</command> te -gebruiken ofwel de opstartparameter <userinput>priority=low</userinput> -toe te voegen. De expert modus geeft u volledige controle over &d-i;. - -</para><para condition="gtk"> - -Voor dit platform ondersteunt &d-i; twee verschillende gebruikersinterfaces: -een tekstuele en een graphische. Tenzij u in het initiële opstartmenu kiest -voor <quote>Graphical install</quote> zal de tekstuele interface worden -gebruikt. Zie <xref linkend="graphical"/> voor nadere informatie over de -grafische versie van het installatiesysteem. - -</para><para condition="not-gtk"> - -Voor dit platform gebruikt het installatiesysteem een tekstuele -gebruikersinterface. Een grafische gebruikersinterface is momenteel niet -beschikbaar. - -</para><para> - -Voor de tekstuele gebruikersinterface wordt gebruik van een muis niet -ondersteund. De volgende toetsen kunnen worden gebruikt om te navigeren binnen -de diverse configuratieschermen. Om <quote>vooruit</quote> of -<quote>terug</quote> te gaan tussen getoonde knoppen of selecties, gebruikt ui -de toetsen <keycap>Tab</keycap> of pijl <keycap>rechts</keycap>, respectievelijk -de <keycombo> <keycap>Shift</keycap> <keycap>Tab</keycap> </keycombo> of pijl -<keycap>links</keycap>. Met de pijlen -<keycap>omhoog</keycap> en <keycap>omlaag</keycap> selecteert u de verschillende -regels in een schuifbare lijst en verschuift u ook de lijst zelf. Daarnaast -kunt u, bij lange lijsten, een letter intoetsen waardoor meteen het deel van de -lijst zal worden getoond waarvan de regels met die letter beginnen. Ook kunt -u met <keycap>Pagina omhoog</keycap> en <keycap>Pagina omlaag</keycap> -de lijst per pagina verschuiven. Met de <keycap>spatiebalk</keycap> selecteert u -opties, bijvoorbeeld bij een keuzevak. Gebruik &enterkey; om keuzes te activeren. - -</para><para arch="s390"> - -S/390 ondersteunt geen virtuele consoles. U kunt echter een tweede en derde -ssh sessie openen om de hieronder beschreven logboeken te bekijken. - -</para><para> - -Foutmeldingen worden omgeleid naar de vierde console. -U kunt toegang krijgen tot deze console door -op <keycombo><keycap>linker Alt</keycap><keycap>F4</keycap></keycombo> -te drukken (houd de linker <keycap>Alt</keycap> toets vast terwijl u de -<keycap>F4</keycap> functietoets indrukt); u keert terug naar het hoofd -installatiescherm met -<keycombo><keycap>linker Alt</keycap><keycap>F1</keycap></keycombo>. - -</para><para> - -Deze meldingen kunnen ook worden teruggevonden in -<filename>/var/log/syslog</filename>. Na de installatie wordt dit logbestand -gekopieerd naar <filename>/var/log/installer/syslog</filename> op uw -nieuwe systeem. Andere installatiemeldingen kunnen tijdens de installatie worden -gevonden in <filename>/var/log/</filename> en, nadat de computer opnieuw is -opgestart met het nieuwe systeem, in <filename>/var/log/installer/</filename>. - -</para> - </sect1> - - - <sect1 id="modules-list"><title>Introductie van de modules</title> -<para> - -Hieronder vindt u een lijst van de modules van het installatiesysteem -met een korte beschrijving van het doel van elke module. Details over -het gebruik van een specifieke module staan in <xref linkend="module-details"/>. -<!-- FJP Toevoegen dat welke modules verplicht/optioneel zijn? //--> - -</para> - -<variablelist> -<varlistentry> - -<term>main-menu</term><listitem><para> -De module 'main-menu' (hoofdmenu) toont tijdens de installatie de -lijst met modules aan de gebruiker en start een module wanneer deze -geselecteerd wordt. De vragen van deze module hebben prioriteit MEDIUM; -dit betekent dat u het menu niet zult zien als u de prioriteit voor -de installatie heeft ingesteld op HIGH of CRITICAL (HIGH is de -standaardwaarde). Indien er echter een fout optreedt waarvoor uw -interventie nodig is, kan de prioriteit tijdelijk worden verlaagd om -u in de gelegenheid te stellen het probleem op te lossen en in dat -geval kan dus het menu alsnog verschijnen. - -</para><para> - -U kunt het hoofdmenu van het installatiesysteem bereiken door herhaaldelijk -de &BTN-GOBACK; knop te selecteren, waardoor u stapsgewijs teruggaat -uit de op dat moment actieve module. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>localechooser</term><listitem><para> - -Stelt de gebruiker in staat om de lokalisatie te bepalen voor zowel -de installatie als het geïnstalleerde systeem: taal, locatie en -<quote>locale</quote>. Tijdens de installatie zullen boodschappen in de -gekozen taal worden getoond, tenzij de vertaling voor die taal niet -compleet is. Als een vertaling niet compleet is, worden de boodschappen -in het Engels getoond. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>console-setup</term><listitem><para> - -De module 'kbd-chooser' (toetsenbordkiezer) toont een lijst van toetsenborden -waaruit de gebruiker het model kan kiezen dat overeenkomt met zijn toetsenbord. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>hw-detect</term><listitem><para> - -Detecteert automatisch de meeste hardware in het systeem, inclusief -netwerkkaarten, harde schijven en PCMCIA. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>cdrom-detect</term><listitem><para> - -Zoekt naar en koppelt een &debian; installatie-CD. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>netcfg</term><listitem><para> - -Configureert de netwerkverbindingen van de computer zodat deze verbinding kan maken -met het Internet. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>iso-scan</term><listitem><para> - -Zoekt op harde schijven naar ISO-images (<filename>.iso</filename> bestanden). - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>choose-mirror</term><listitem><para> - -Deze module toont een overzicht van spiegelservers met het &debian; Archief. -De gebruiker kan hiermee de bron voor de installatie van &debian; pakketten kiezen. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>cdrom-checker</term><listitem><para> - -Controleert de integriteit van een CD. Op die manier kan een gebruiker -zich ervan verzekeren dat de installatie-CD niet beschadigd is. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>lowmem</term><listitem><para> - -De module 'lowmem' probeert te signaleren wanneer een systeem slechts over -beperkt intern geheugen beschikt en doet vervolgens verschillende trucs om -niet strict noodzakelijke onderdelen van &d-i; te verwijderen (ten koste van -enige functionaliteit). - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>anna</term><listitem><para> - -Het acroniem 'anna' staat voor "Anna's Not Nearly APT". Deze module installeert -pakketten die zijn opgehaald vanaf de gekozen mirror of CD. -<!-- FJP Niet alle pakketten; alleen het installatiesysteem? //--> - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>user-setup</term><listitem><para> - -Stelt het wachtwoord voor het <quote>root</quote> account in en voegt een -account voor een normale gebruiker toe. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>clock-setup</term><listitem><para> - -Stelt de interne systeem clock in en bepaalt of de deze is ingesteld op -UTC of niet. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>tzsetup</term><listitem><para> - -Selecteert de tijdzone op basis van de eerder geselecteerde locatie. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>partman</term><listitem><para> - -De module 'partman' (partitie-manager) stelt de gebruiker in staat om -harde schijven die met het systeem verbonden zijn, in te delen, bestandssystemen -te creëren op geselecteerde partities en deze aan te sluiten op koppelpunten. -Daarnaast kent 'partman' interessante functies als het volledig geautomatiseerd -indelen van een harde schijf en ondersteuning van LVM. Voor &debian; geniet 'partman' -de voorkeur als hulpmiddel voor het indelen van harde schijven. -<!-- FJP Ook op andere media dan harde schijven (b.v. USB memory sticks)? //--> - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>partitioner</term><listitem><para> - -Maakt het mogelijk om harde schijven in te delen die zijn aangesloten op het -systeem. Er wordt een schijfindelingsprogramma gekozen dat past bij het platform -waartoe uw computer behoort. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>partconf</term><listitem><para> - -Toont een overzicht van partities en creëert bestandssystemen op de -geselecteerde partities volgens de instructies van de gebruiker. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>lvmcfg</term><listitem><para> - -Helpt de gebruiker met het configureren van de <firstterm>LVM</firstterm> -('Logical Volume Manager'). - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>mdcfg</term><listitem><para> - -Stelt de gebruiker in staat om een Software <firstterm>RAID</firstterm> -('Redundant Array of Inexpensive Disks') te configureren. Een softwarematige RAID -is veelal beter dan de goedkope (semi-hardwarematige) IDE-stuurapparaten voor RAID -die op sommige nieuwere moederborden voorkomen. -<!-- FJP: Origineel: superb is volgens mij niet juist in deze context //--> - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>base-installer</term><listitem><para> - -Installeert een basisset van pakketten die het mogelijk maken om de -computer, nadat deze is herstart, onder &debian-gnu; te laten functioneren. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>apt-setup</term><listitem><para> - -Verzorgt de configuratie van apt. Dit gebeurt grotendeels automatisch op -basis van de gebruikte installatiemethode. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>pkgsel</term><listitem><para> - -Maakt gebruik van <classname>tasksel</classname> voor de selecte en -installatie van aanvullende programmatuur. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>os-prober</term><listitem><para> - -Zoekt naar reeds op de computer aanwezige besturingssystemen en geeft -deze informatie door aan de module 'bootloader-installer'. Afhankelijk -van de gebruikte opstartlader, kan deze de gevonden besturingssystemen -vervolgens toevoegen aan het menu van de opstartlader. Op deze manier -kan de gebruiker tijdens het opstarten van de computer op een eenvoudige -manier kiezen welk besturingssysteem moet worden gestart. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>bootloader-installer</term><listitem><para> - -Installeert een opstartlader (boot loader) programma op de harde schijf. Dit -is noodzakelijk om de computer onder &arch-kernel; te laten opstarten zonder een -diskette of CD te gebruiken. Veel opstartladers kennen de mogelijkheid om -de gebruiker — elke keer dat de computer wordt opgestart — te -laten kiezen uit verschillende besturingssystemen. -De installatieprogramma's voor de diverse opstartladers installeren alle een -opstartlader op de harde schijf. Een opstartlader is noodzakelijk om de -computer onder Linux te laten opstarten zonder een diskette of CD te gebruiken. -Veel opstartladers kennen de mogelijkheid om de gebruiker — elke keer -dat de computer wordt opgestart — te laten kiezen uit alternatieve -besturingssystemen. - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>shell</term><listitem><para> - -Stelt de gebruiker in staat vanuit het menu of in de tweede console -een shell te starten. -<!-- FJP Vertaling 'shell'? Zie ook 'what-is-linux.xml' //--> -<!-- FJP Welke shell is beschikbaar? //--> - -</para></listitem> -</varlistentry> -<varlistentry> - -<term>save-logs</term><listitem><para> - -Stelt de gebruiker in staat om, wanneer problemen worden tegengekomen, -informatie op een diskette, via het netwerk, op harde schijf of op een -ander medium te bewaren. -Hiermee kan later een nauwkeurig verslag van problemen met het -installatiesysteem worden gestuurd aan de &debian; ontwikkelaars. - -</para></listitem> -</varlistentry> - -</variablelist> - - </sect1> - -&using-d-i-components.xml; -&loading-firmware.xml; - -</chapter> |