Restart Dutch translation of D-I manual in PO format.

1 files changed, 0 insertions, 131 deletions

diff --git a/nl/partitioning/device-names.xml b/nl/partitioning/device-names.xml
deleted file mode 100644
index eb52b09ef..000000000
--- a/nl/partitioning/device-names.xml
+++ /dev/null
@@ -1,131 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 61133 untranslated -->
-
-
- <sect1 arch="linux-any" id="device-names">
- <title>Device Names in Linux</title>
-<para>
-
-Linux disks and partition names may be different from other operating
-systems.  You need to know the names that Linux uses when you create
-and mount partitions. Here's the basic naming scheme:
-
-</para>
-<itemizedlist arch="not-s390">
-<listitem><para>
-
-The first floppy drive is named <filename>/dev/fd0</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The second floppy drive is named <filename>/dev/fd1</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The first SCSI disk (SCSI ID address-wise) is named
-<filename>/dev/sda</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The second SCSI disk (address-wise) is named
-<filename>/dev/sdb</filename>, and so on.
-
-</para></listitem>
-<listitem><para>
-
-The first SCSI CD-ROM is named <filename>/dev/scd0</filename>, also
-known as <filename>/dev/sr0</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The master disk on IDE primary controller is named
-<filename>/dev/hda</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The slave disk on IDE primary controller is named
-<filename>/dev/hdb</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The master and slave disks of the secondary controller can be called
-<filename>/dev/hdc</filename> and <filename>/dev/hdd</filename>,
-respectively.  Newer IDE controllers can actually have two channels,
-effectively acting like two controllers.
-
-</para></listitem>
-</itemizedlist>
-
-<itemizedlist arch="s390">
-<listitem><para>
-
-The first DASD device is named
-<filename>/dev/dasda</filename>.
-
-</para></listitem>
-<listitem><para>
-
-The second DASD device is named
-<filename>/dev/dasdb</filename>, and so on.
-
-</para></listitem>
-</itemizedlist>
-
-<para arch="not-s390">
-
-The partitions on each disk are represented by appending a decimal
-number to the disk name: <filename>sda1</filename> and
-<filename>sda2</filename> represent the first and
-second partitions of the first SCSI disk drive in your system.
-
-</para><para arch="not-s390">
-
-Here is a real-life example.  Let's assume you have a system with 2
-SCSI disks, one at SCSI address 2 and the other at SCSI address 4.
-The first disk (at address 2) is then named <filename>sda</filename>,
-and the second <filename>sdb</filename>.  If the
-<filename>sda</filename> drive has 3 partitions on it, these will be
-named <filename>sda1</filename>, <filename>sda2</filename>, and
-<filename>sda3</filename>.  The same applies to the
-<filename>sdb</filename> disk and its partitions.
-
-</para><para arch="not-s390">
-
-Note that if you have two SCSI host bus adapters (i.e., controllers),
-the order of the drives can get confusing.  The best solution in this
-case is to watch the boot messages, assuming you know the drive models
-and/or capacities.
-
-</para><para arch="x86">
-
-Linux represents the primary partitions as the drive name, plus the
-numbers 1 through 4.  For example, the first primary partition on the
-first IDE drive is <filename>/dev/hda1</filename>.  The logical partitions are
-numbered starting at 5, so the first logical partition on that same
-drive is <filename>/dev/hda5</filename>.  Remember that the extended
-partition, that is, the primary partition holding the logical
-partitions, is not usable by itself.  This applies to SCSI disks as
-well as IDE disks.
-
-</para><para arch="sparc">
-
-Sun disk partitions allow for 8 separate partitions (or slices). The
-third partition is usually (and is preferred to have) the <quote>Whole
-Disk</quote> partition. This partition references all of the sectors of the
-disk, and is used by the boot loader (either SILO, or Sun's).
-
-</para><para arch="s390">
-
-The partitions on each disk are represented by appending a decimal
-number to the disk name: <filename>dasda1</filename> and
-<filename>dasda2</filename> represent the first and
-second partitions of the first DASD device in your system.
-
-</para>
- </sect1>