Restart Dutch translation of D-I manual in PO format.

10 files changed, 0 insertions, 860 deletions

diff --git a/nl/hardware/supported/amd64.xml b/nl/hardware/supported/amd64.xml
deleted file mode 100644
index 946ecaaeb..000000000
--- a/nl/hardware/supported/amd64.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 39614 untranslated -->
-
-
-  <sect2 arch="amd64"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Complete information concerning supported peripherals can be found at
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>.
-This section merely outlines the basics.
-
-</para>
-
-   <sect3><title>CPU</title>
-<para>
-
-Both AMD64 and Intel EM64t processors are supported.
-
-</para>
-   </sect3>
-
-<!-- Not sure if this is relevant for AMD64; AFAIK only PCI supported
-   <sect3 id="bus"><title>I/O Bus</title>
-<para>
-
-The system bus is the part of the motherboard which allows the CPU to
-communicate with peripherals such as storage devices.  Your computer
-must use the PCI bus.
-
-</para>
-   </sect3>
--->
-  </sect2>
-
diff --git a/nl/hardware/supported/arm.xml b/nl/hardware/supported/arm.xml
deleted file mode 100644
index eae55aa2d..000000000
--- a/nl/hardware/supported/arm.xml
+++ /dev/null
@@ -1,104 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 61324 untranslated -->
-
-
-  <sect2 arch="arm"><title>CPU, Main Boards, and Video Support</title>
-
-<para>
-
-Each distinct ARM architecture requires its own kernel. Because of
-this the standard &debian; distribution only supports installation on
-a number of the most common platforms. The &debian; userland however may be
-used by <emphasis>any</emphasis> ARM CPU.
-
-</para>
-
-<para>
-
-Most ARM CPUs may be run in either endian mode (big or little). However,
-the majority of current system implementation uses little-endian mode.
-&debian; currently only supports little-endian ARM systems.
-
-</para>
-
-<para>
-
-The supported platforms are:
-
-<variablelist>
-
-<varlistentry>
-<term>IOP32x</term>
-<listitem><para>
-
-Intel's I/O Processor (IOP) line is found in a number of products related
-to data storage and processing.  &debian; currently supports the IOP32x
-platform, featuring the IOP 80219 and 32x chips commonly found in Network
-Attached Storage (NAS) devices.  &debian; explicitly supports two such
-devices: the <ulink url="&url-arm-cyrius-glantank;">GLAN Tank</ulink> from
-IO-Data and the <ulink url="&url-arm-cyrius-n2100;">Thecus N2100</ulink>.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>IXP4xx</term>
-<listitem><para>
-
-The IXP4xx platform is based on Intel's XScale ARM core.  Currently, only
-one IXP4xx based system is supported, the Linksys NSLU2.
-The Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a small
-device which allows you to easily provide storage via the network.  It
-comes with an Ethernet connection and two USB ports to which hard drives
-can be connected.  There is an external site with <ulink
-url="&url-arm-cyrius-nslu2;">installation instructions</ulink>.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Kirkwood</term>
-<listitem><para>
-
-Kirkwood is a system on a chip (SoC) from Marvell that integrates an ARM
-CPU, Ethernet, SATA, USB, and other functionality in one chip.  We
-currently support the following Kirkwood based devices: OpenRD (OpenRD-Base
-and OpenRD-Client), <ulink
-url="&url-arm-cyrius-sheevaplug;">SheevaPlug</ulink> and <ulink
-url="&url-arm-cyrius-qnap-kirkwood;">QNAP Turbo Station</ulink> (TS-110,
-TS-119, TS-210, TS-219 and TS-219P; the TS-410 and TS-419P are not yet
-supported).
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Orion5x</term>
-<listitem><para>
-
-Orion is a system on a chip (SoC) from Marvell that integrates an ARM CPU,
-Ethernet, SATA, USB, and other functionality in one chip. There are many
-Network Attached Storage (NAS) devices on the market that are based on an
-Orion chip. We currently support the following Orion based devices: <ulink
-url="&url-arm-cyrius-kuroboxpro;">Buffalo Kurobox</ulink>, <ulink
-url="&url-arm-cyrius-mv2120;">HP mv2120</ulink>, <ulink
-url="&url-arm-cyrius-qnap;">QNAP Turbo Station</ulink> (TS-109, TS-209 and
-TS-409).
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Versatile</term>
-<listitem><para>
-
-The Versatile platform is emulated by QEMU and is therefore a nice way to
-test and run &debian; on ARM if you don't have the hardware.
-
-</para></listitem>
-</varlistentry>
-
-</variablelist>
-
-</para>
-  </sect2>
diff --git a/nl/hardware/supported/hppa.xml b/nl/hardware/supported/hppa.xml
deleted file mode 100644
index 47578abcb..000000000
--- a/nl/hardware/supported/hppa.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 41452 untranslated -->
-
-
-  <sect2 arch="hppa"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-There are two major support <emphasis>&architecture;</emphasis> flavors:
-PA-RISC 1.1 and PA-RISC 2.0.  The PA-RISC 1.1 architecture is targeted
-at 32-bit processors whereas the 2.0 architecture is targeted to
-the 64-bit processors.  Some systems are able to run either kernel.
-In both cases, the userland is 32-bit.  There is the possibility of
-a 64-bit userland in the future.
-
-</para>
-  </sect2>
-
diff --git a/nl/hardware/supported/i386.xml b/nl/hardware/supported/i386.xml
deleted file mode 100644
index baa209b29..000000000
--- a/nl/hardware/supported/i386.xml
+++ /dev/null
@@ -1,76 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 56248 untranslated -->
-
-
-  <sect2 arch="i386"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Complete information concerning supported peripherals can be found at
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>.
-This section merely outlines the basics.
-
-</para>
-
-   <sect3><title>CPU</title>
-<para>
-
-Nearly all x86-based (IA-32) processors still in use in personal computers
-are supported, including all varieties of Intel's "Pentium" series.
-This also includes 32-bit AMD and VIA (former Cyrix) processors, and
-processors like the Athlon XP and Intel P4 Xeon.
-
-</para><para>
-
-However, &debian; GNU/Linux &releasename; will <emphasis>not</emphasis> run
-on 386 or earlier processors.  Despite the architecture name "i386", support
-for actual 80386 processors (and their clones) was dropped with the Sarge
-(r3.1) release of &debian;<footnote>
-
-<para>
-We have long tried to avoid this, but in the end it was necessary due a
-unfortunate series of issues with the compiler and the kernel, starting
-with an bug in the C++ ABI provided by GCC.  You should still be able to
-run &debian; GNU/Linux on actual 80386 processors if you compile your own
-kernel and compile all packages from source, but that is beyond the
-scope of this manual.
-</para>
-
-</footnote>. (No version of Linux has ever supported the 286 or earlier
-chips in the series.)  All i486 and later processors are still
-supported<footnote>
-
-<para>
-
-Many &debian; packages will actually run slightly faster on modern computers
-as a positive side effect of dropping support for these old chips.  The
-i486, introduced in 1989, has three opcodes (bswap, cmpxchg, and xadd)
-which the i386, introduced in 1986, did not have. Previously, these could not
-be easily used by most &debian; packages; now they can.
-
-</para>
-
-</footnote>.
-
-</para>
-<note><para>
-
-If your system has a 64-bit processor from the AMD64 or Intel EM64T families,
-you will probably want to use the installer for the amd64 architecture instead
-of the installer for the (32-bit) i386 architecture.
-
-</para></note>
-   </sect3>
-
-   <sect3 id="bus"><title>I/O Bus</title>
-<para>
-
-The system bus is the part of the motherboard which allows the CPU to
-communicate with peripherals such as storage devices.  Your computer
-must use the ISA, EISA, PCI, PCIe, PCI-X, or VESA Local Bus (VLB, sometimes called the VL
-bus).  Essentially all personal computers sold in recent years use one
-of these.
-
-</para>
-   </sect3>
-  </sect2>
-
diff --git a/nl/hardware/supported/ia64.xml b/nl/hardware/supported/ia64.xml
deleted file mode 100644
index 0dabd4a41..000000000
--- a/nl/hardware/supported/ia64.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
diff --git a/nl/hardware/supported/mips.xml b/nl/hardware/supported/mips.xml
deleted file mode 100644
index 91f95d973..000000000
--- a/nl/hardware/supported/mips.xml
+++ /dev/null
@@ -1,56 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 59840 untranslated -->
-
-
-  <sect2 arch="mips"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-&debian; on &arch-title; supports the following platforms:
-
-<itemizedlist>
-<listitem><para>
-
-SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and
-Challenge S.  Since these machines are very similar, whenever this document
-refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well.
-
-</para></listitem>
-<listitem><para>
-
-SGI IP32: this platform is generally known as SGI O2.
-
-</para></listitem>
-<listitem><para>
-
-MIPS Malta: this platform is emulated by QEMU and is therefore a nice way
-to test and run &debian; on MIPS if you don't have the hardware.
-
-</para></listitem>
-</itemizedlist>
-
-Complete information regarding supported mips/mipsel machines can be found
-at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
-following, only the systems supported by the &debian; installer will be
-covered.  If you are looking for support for other subarchitectures, please
-contact the <ulink url="&url-list-subscribe;">
-debian-&arch-listname; mailing list</ulink>.
-
-</para>
-
-   <sect3><title>CPU</title>
-<para>
-
-On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000
-processors are supported by the &debian; installation system on big endian
-MIPS.  On SGI IP32, currently only systems based on the R5000 are supported.
-
-</para><para>
-
-Some MIPS machines can be operated in both big and little endian mode.  For
-little endian MIPS, please read the documentation for the mipsel
-architecture.
-
-</para>
-   </sect3>
-  </sect2>
-
diff --git a/nl/hardware/supported/mipsel.xml b/nl/hardware/supported/mipsel.xml
deleted file mode 100644
index 4ba800a5c..000000000
--- a/nl/hardware/supported/mipsel.xml
+++ /dev/null
@@ -1,51 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 59840 untranslated -->
-
-
-  <sect2 arch="mipsel"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-&debian; on &arch-title; supports the following platforms:
-
-<itemizedlist>
-<listitem><para>
-
-Cobalt Microserver: only MIPS based Cobalt machines are covered here.  This
-includes the Cobalt RaQ, Qube2 and RaQ2, and the Gateway Microserver.
-
-</para></listitem>
-<listitem><para>
-
-MIPS Malta: this platform is emulated by QEMU and is therefore a nice way
-to test and run &debian; on MIPS if you don't have the hardware.
-
-</para></listitem>
-</itemizedlist>
-
-Complete information regarding supported mips/mipsel machines can be found
-at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
-following, only the systems supported by the &debian; installer will be
-covered.  If you are looking for support for other subarchitectures, please
-contact the <ulink url="&url-list-subscribe;">
-debian-&arch-listname; mailing list</ulink>.
-
-</para>
-
-   <sect3><title>CPU/Machine types</title>
-
-<para>
-
-All MIPS based Cobalt machines are supported with the exception of the
-Qube 2700 (Qube 1).
-
-</para>
-   </sect3>
-
-   <sect3><title>Supported console options</title>
-<para>
-
-Cobalt machines use 115200 bps.
-
-</para>
-   </sect3>
-  </sect2>
diff --git a/nl/hardware/supported/powerpc.xml b/nl/hardware/supported/powerpc.xml
deleted file mode 100644
index bb146b54a..000000000
--- a/nl/hardware/supported/powerpc.xml
+++ /dev/null
@@ -1,428 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 56248 untranslated -->
-
-
-  <sect2 arch="powerpc"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-For &debian-gnu; &release; only the PMac (Power-Macintosh or PowerMac) and PreP
-subarchitectures are supported.
-
-<!--
-There are four major supported <emphasis>&architecture;</emphasis>
-subarchitectures: PMac (Power-Macintosh or PowerMac), PReP, APUS (Amiga 
-Power-UP System), and CHRP machines. Each subarchitecture has its own boot
-methods. In addition, there are four different kernel flavours,
-supporting different CPU variants.
-
-</para><para>
-
-Ports to other <emphasis>&architecture;</emphasis> architectures, such
-as the Be-Box and MBX architecture, are underway but not yet supported
-by &debian;. We may have a 64-bit port in the future.
--->
-
-</para>
-
-   <sect3><title>Kernel Flavours</title>
-
-<para>
-
-There are two flavours of the powerpc kernel in &debian;, based on the
-CPU type:
-
-<variablelist>
-<varlistentry>
-<term>powerpc</term>
-<listitem><para>
-
-Most systems use this kernel flavour, which supports the PowerPC 601,
-603, 604, 740, 750, and 7400 processors. All Apple PowerMac machines 
-up to and including the one marketed as G4 use one of these processors.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>power64</term>
-<listitem><para>
-
-The power64 kernel flavour supports the following CPUs:
-
-</para><para>
-
-The POWER3 processor is used in older IBM 64-bit server systems: known
-models include the IntelliStation POWER Model 265, the pSeries 610 and
-640, and the RS/6000 7044-170, 7043-260, and 7044-270.
-
-</para><para>
-
-The POWER4 processor is used in more recent IBM 64-bit server systems:
-known models include the pSeries 615, 630, 650, 655, 670, and 690.
-
-</para><para>
-
-Systems using the Apple G5 (PPC970FX processor) are also based on the
-POWER4 architecture, and use this kernel flavour.
-
-</para></listitem>
-</varlistentry>
-
-<!--
-<varlistentry>
-<term>prep</term>
-<listitem><para>
-
-This kernel flavour supports the PReP subarchitecture.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>apus</term>
-<listitem><para>
-
-This kernel flavour supports the Amiga Power-UP System, though it is
-currently disabled.
-
-</para></listitem>
-</varlistentry>
--->
-</variablelist>
-
-</para>
-
-   </sect3>
-
-   <sect3><title>Power Macintosh (pmac) subarchitecture</title>
-
-<para>
-
-Apple (and briefly a few other manufacturers &mdash; Power Computing, for
-example) made a series of Macintosh computers based on the PowerPC
-processor. For purposes of architecture support, they are categorized
-as NuBus (not supported by &debian;), OldWorld, and NewWorld.
-
-</para><para>
-
-OldWorld systems are most Power Macintoshes with a floppy drive and a
-PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are
-OldWorld machines. Those pre-iMac PowerPC models from Apple use a 
-four digit naming scheme, except for the beige colored G3 systems, which 
-are also OldWorld.
-
-</para><para>
-
-The so called NewWorld PowerMacs are any PowerMacs in translucent
-colored plastic cases and later models. That includes all iMacs, iBooks,
-G4 systems, blue colored G3 systems, and most PowerBooks manufactured in and
-after 1999. The NewWorld PowerMacs are also known for using the <quote>ROM in
-RAM</quote> system for MacOS, and were manufactured from mid-1998 onwards.
-
-</para><para>
-
-Specifications for Apple hardware are available at
-<ulink url="http://www.info.apple.com/support/applespec.html">AppleSpec</ulink>,
-and, for older hardware,
-<ulink url="http://www.info.apple.com/support/applespec.legacy/index.html">AppleSpec Legacy</ulink>.
-
-</para><para>
-
-<informaltable>
-<tgroup cols="3">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<colspec colname="c3"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Model Name/Number</entry>
-  <entry>Generation</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="27">Apple</entry>
-  <entry>iMac Bondi Blue, 5 Flavors, Slot Loading</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>iMac Summer 2000, Early 2001</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>iMac G5</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>iBook, iBook SE, iBook Dual USB</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>iBook2</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>iBook G4</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh Blue and White (B&amp;W) G3</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh G4 PCI, AGP, Cube</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh G4 Gigabit Ethernet</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh G4 Digital Audio, Quicksilver</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh G5</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>PowerBook G3 FireWire Pismo (2000)</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>PowerBook G3 Lombard (1999)</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>PowerBook G4 Titanium</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>PowerBook G4 Aluminum</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Xserve G5</entry>
-  <entry>NewWorld</entry>
-</row><row>
-  <entry>Performa 4400, 54xx, 5500</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Performa 6360, 6400, 6500</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 4400, 5400</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 7200, 7300, 7500, 7600</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 8200, 8500, 8600</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 9500, 9600</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh (Beige) G3 Minitower</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh (Beige) Desktop, All-in-One</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>PowerBook 2400, 3400, 3500</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>PowerBook G3 Wallstreet (1998)</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Twentieth Anniversary Macintosh</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>Workgroup Server 7250, 7350, 8550, 9650, G3</entry>
-  <entry>OldWorld</entry>
-</row>
-
-<row>
-  <entry morerows="1">Power Computing</entry>
-  <entry>PowerBase, PowerTower / Pro, PowerWave</entry>
-  <entry>OldWorld</entry>
-</row><row>
-  <entry>PowerCenter / Pro, PowerCurve</entry>
-  <entry>OldWorld</entry>
-</row>
-
-<row>
-  <entry>UMAX</entry>
-  <entry>C500, C600, J700, S900</entry>
-  <entry>OldWorld</entry>
-</row>
-
-<row>
-  <entry>APS</entry>
-  <entry>APS Tech M*Power 604e/2000</entry>
-  <entry>OldWorld</entry>
-</row>
-
-<row>
-  <entry>Motorola</entry>
-  <entry>Starmax 3000, 4000, 5000, 5500</entry>
-  <entry>OldWorld</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para>
-
-   </sect3>
- 
-   <sect3><title>PReP subarchitecture</title>
-
-<para>
-
-<informaltable>
-<tgroup cols="2">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Model Name/Number</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="4">Motorola</entry>
-  <entry>Firepower, PowerStack Series E, PowerStack II</entry>
-</row><row>
-  <entry>MPC 7xx, 8xx</entry>
-</row><row>
-  <entry>MTX, MTX+</entry>
-</row><row>
-  <entry>MVME2300(SC)/24xx/26xx/27xx/36xx/46xx</entry>
-</row><row>
-  <entry>MCP(N)750</entry>
-</row>
-
-<row>
-  <entry morerows="3">IBM RS/6000</entry>
-  <entry>40P, 43P</entry>
-</row><row>
-  <entry>Power 830/850/860 (6070, 6050)</entry>
-</row><row>
-  <entry>6030, 7025, 7043</entry>
-</row><row>
-  <entry>p640</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para>
-
-   </sect3>
-
-   <sect3><title>CHRP subarchitecture (unsupported)</title>
-
-<para>
-
-<informaltable>
-<tgroup cols="2">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Model Name/Number</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry>IBM RS/6000</entry>
-  <entry>B50, 43P-150, 44P</entry>
-</row>
-<row>
-  <entry>Genesi</entry>
-  <entry>Pegasos I, Pegasos II</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para>
-
-   </sect3>
-
-   <sect3><title>APUS subarchitecture (unsupported)</title>
-
-<para>
-
-<informaltable>
-<tgroup cols="2">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Model Name/Number</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry>Amiga Power-UP Systems (APUS)</entry>
-  <entry>A1200, A3000, A4000</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para>
-
-   </sect3>
-
-   <sect3><title>Nubus PowerMac subarchitecture (unsupported)</title>
-
-<para>
-
-NuBus systems are not currently supported by &debian;/powerpc. The
-monolithic Linux/PPC kernel architecture does not have support for
-these machines; instead, one must use the MkLinux Mach microkernel,
-which &debian; does not yet support. These include the following:
-
-<itemizedlist>
-<listitem><para>
-
-Power Macintosh 6100, 7100, 8100
-
-</para></listitem>
-<listitem><para>
-
-Performa 5200, 6200, 6300
-
-</para></listitem>
-<listitem><para>
-
-Powerbook 1400, 2300, and 5300
-
-</para></listitem>
-<listitem><para>
-
-Workgroup Server 6150, 8150, 9150
-
-</para></listitem>
-</itemizedlist>
-
-A linux kernel for these machines and limited support is available at
-<ulink url="http://nubus-pmac.sourceforge.net/"></ulink>.
-
-</para>
-
-   </sect3>
-
-   <sect3><title>Non-PowerPC Macs</title>
-
-<para>
-
-Macintosh computers using the 680x0 series of processors are
-<emphasis>not</emphasis> in the PowerPC family but are instead m68k
-machines. Those models start with <quote>Mac II</quote> series, go on
-to the <quote>LC</quote> family, then the Centris series, and culminate
-in the Quadras and Performas. These models usually have a Roman numeral
-or 3-digit model number such as Mac IIcx, LCIII or Quadra 950.
-
-</para><para>
-
-This model range started with the Mac II (Mac II, IIx, IIcx, IIci,
-IIsi, IIvi, IIvx, IIfx), then the LC (LC, LCII, III, III+, 475, 520,
-550, 575, 580, 630), then the Mac TV, then the Centris (610, 650,
-660AV), the Quadra (605, 610, 630, 650, 660AV, 700, 800, 840AV, 900,
-950), and finally the Performa 200-640CD.
-
-</para><para>
-
-In laptops, it started with the Mac Portable, then the PowerBook
-100-190cs and the PowerBook Duo 210-550c (excluding PowerBook 500
-which is Nubus, please see the section above).
-
-</para>
-
-   </sect3>
- </sect2>
diff --git a/nl/hardware/supported/s390.xml b/nl/hardware/supported/s390.xml
deleted file mode 100644
index 237674566..000000000
--- a/nl/hardware/supported/s390.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 39895 untranslated -->
-
-
-  <sect2 arch="s390"><title>S/390 and zSeries machine types</title>
-<para>
-
-Complete information regarding supported S/390 and zSeries machines can
-be found in IBM's Redbook
-<ulink url="http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf">
-Linux for IBM eServer zSeries and S/390: Distributions</ulink> in
-chapter 2.1 or at the
-<ulink url="http://www-128.ibm.com/developerworks/linux/linux390/index.html">zSeries
-page at the developerWorks</ulink>.
-In short, G5, Multiprise 3000, G6 and all zSeries are fully supported;
-Multiprise 2000, G3 and G4 machines are supported with IEEE floating
-point emulation and thus degraded performance.
-
-</para>
-  </sect2>
-
diff --git a/nl/hardware/supported/sparc.xml b/nl/hardware/supported/sparc.xml
deleted file mode 100644
index 5d02c340b..000000000
--- a/nl/hardware/supported/sparc.xml
+++ /dev/null
@@ -1,70 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 49849 untranslated -->
-
-  <sect2 arch="sparc" id="sparc-cpus">
-  <title>CPU and Main Boards Support</title>
-<para>
-
-Sparc-based hardware is divided into a number of different subarchitectures,
-identified by one of the following names: sun4, sun4c, sun4d, sun4m, sun4u
-or sun4v. The following list describes what machines they include and what
-level of support may be expected for each of them.
-
-</para>
-
-<variablelist>
-<varlistentry>
-<term>sun4, sun4c, sun4d, sun4m</term>
-
-<listitem><para>
-
-None of these 32-bit sparc subarchitectures (sparc32) is supported. For a
-complete list of machines belonging to these subarchitectures, please consult
-the <ulink url="http://en.wikipedia.org/wiki/SPARCstation">Wikipedia
-SPARCstation page</ulink>.
-
-</para><para>
-
-The last &debian; release to support sparc32 was Etch, but even then only
-for sun4m systems. Support for the other 32-bits subarchitectures had
-already been discontinued after earlier releases.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>sun4u</term>
-
-<listitem><para>
-
-This subarchitecture includes all 64-bit machines (sparc64) based on
-the UltraSparc processor and its clones. Most of the machines are well
-supported, even though for some you may experience problems booting from
-CD due to firmware or bootloader bugs (this problem may be worked around
-by using netbooting). Use the sparc64 or sparc64-smp kernel in UP and SMP
-configurations respectively.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>sun4v</term>
-
-<listitem><para>
-
-This is the newest addition to the Sparc family, which includes machines
-based on the Niagara multi-core CPUs. At the moment such CPUs are only
-available in T1000 and T2000 servers by Sun, and are well supported. Use
-the sparc64-smp kernel.
-
-</para></listitem>
-</varlistentry>
-</variablelist>
-
-<para>
-
-Note that Fujitsu's SPARC64 CPUs used in PRIMEPOWER family of servers are not
-supported due to lack of support in the Linux kernel.
-
-</para>
-  </sect2>