Remove all untranslated documents for Danish

5 files changed, 0 insertions, 1556 deletions

diff --git a/da/appendix/chroot-install.xml b/da/appendix/chroot-install.xml
deleted file mode 100644
index 104e156ec..000000000
--- a/da/appendix/chroot-install.xml
+++ /dev/null
@@ -1,498 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 18773 untranslated -->
-
- <sect1 id="linux-upgrade">
- <title>Installing &debian; from a Unix/Linux System</title>
-
-<para>
-
-This section explains how to install &debian; from an existing
-Unix or Linux system, without using the ncurses-based, menu-driven
-installer as explained in the rest of the manual. This "cross-install"
-HOWTO has been requested by users switching to &debian; from
-Redhat, Mandrake, and SUSE. In this section some familiarity with
-entering *nix commands and navigating the file system is assumed. In
-this section, <prompt>$</prompt> symbolizes a command to be entered in
-the user's current system, while <prompt>#</prompt> refers to a
-command entered in the Debian chroot.
-
-</para><para>
-
-Once you've got the new Debian system configured to your preference,
-you can migrate your existing user data (if any) to it, and keep on
-rolling. This is therefore a "zero downtime" &debian;
-install. It's also a clever way for dealing with hardware that
-otherwise doesn't play friendly with various boot or installation
-media.
-
-</para>
-
-  <sect2>
-  <title>Getting Started</title>
-<para>
-
-With your current *nix partitioning tools, repartition the hard
-drive as needed, creating at least one filesystem plus swap. You
-need at least 150MB of space available for a console only install,
-or at least 300MB if you plan to install X.
-
-</para><para>
-
-To create file systems on your partitions. For example, to create an 
-ext3 file system on partition <filename>/dev/hda6</filename> (that's  
-our example root partition):
-
-<informalexample><screen>
-
- $ mke2fs -j /dev/hda6
-
-</screen></informalexample>
-
-To create an ext2 file system instead, omit <userinput>-j</userinput>.
-
-</para><para>
-
-Initialize and activate swap (substitute the partition number for 
-your intended Debian swap partition):
-
-<informalexample><screen>
-
- $ mkswap /dev/hda5
- $ sync; sync; sync
- $ swapon /dev/hda5
-
-</screen></informalexample>
-
-</para><para>
-
-Mount one partition as <filename>/mnt/debinst</filename> (the
-installation point, to be the root (<filename>/</filename>) filesystem
-on your new system). The mount point name is strictly arbitrary, it is
-referenced later below.
-
-<informalexample><screen>
-
- $ mkdir /mnt/debinst
- $ mount /dev/hda6 /mnt/debinst
-
-</screen></informalexample>
-
-</para>
-  </sect2>
-
-  <sect2>
-  <title>Install <command>debootstrap</command></title>
-<para>
-
-The tool that the Debian installer uses, which is recognized as the
-official way to install a Debian base system, is
-<command>debootstrap</command>. It uses <command>wget</command>, but
-otherwise depends only on <classname>/bin/sh</classname>. Install
-<command>wget</command> if it isn't already on your current system,
-then download and install <command>debootstrap</command>.
-
-</para><para>
-
-If you have an rpm-based system, you can use alien to convert the 
-.deb into .rpm, or download an rpm-ized version at 
-<ulink url="http://people.debian.org/~blade/install/debootstrap"></ulink>
-
-</para><para>
-
-Or, you can use the following procedure to install it
-manually. Make a work folder for extracting the .deb into:
-
-<informalexample><screen>
-
- $ mkdir work
- $ cd work
-
-</screen></informalexample>
-</para><para>
-
-The <command>debootstrap</command> binary is located in the Debian
-archive (be sure to select the proper file for your
-architecture). Download the <command>debootstrap</command> .deb from
-the <ulink url="http://ftp.debian.org/debian/pool/main/d/debootstrap/">
-pool</ulink>, copy the package to the work folder, and extract the
-binary files from it. You will need to have root privileges to install
-the binaries.
-
-<informalexample><screen>
-
- $ ar -xf debootstrap_0.X.X_arch.deb
- $ cd /
- $ zcat &#60; /full-path-to-work/work/data.tar.gz | tar xv
-
-</screen></informalexample>
-
-</para>
-  </sect2>
-
-  <sect2>
-  <title>Run <command>debootstrap</command></title>
-<para>
-
-<command>debootstrap</command> can download the needed files directly
-from the archive when you run it. You can substitute any Debian
-archive mirror for <userinput>http.us.debian.org/debian</userinput> in
-the command example below, preferably a mirror close to you
-network-wise. Mirrors are listed at 
-<ulink url="http://www.debian.org/misc/README.mirrors"></ulink>.
-
-</para><para>
-
-If you have a &releasename; &debian; CD mounted at
-<filename>/cdrom</filename>, you could substitute a file URL instead
-of the http URL: <userinput>file:/cdrom/debian/</userinput>
-
-</para><para>
-
-Substitute one of the following for <replaceable>ARCH</replaceable> 
-in the <command>debootstrap</command> command: 
-
-<userinput>alpha</userinput>, 
-<userinput>arm</userinput>,
-<userinput>hppa</userinput>, 
-<userinput>i386</userinput>, 
-<userinput>ia64</userinput>, 
-<userinput>m68k</userinput>,
-<userinput>mips</userinput>, 
-<userinput>mipsel</userinput>, 
-<userinput>powerpc</userinput>, 
-<userinput>s390</userinput>, or
-<userinput>sparc</userinput>.
-
-<informalexample><screen>
-
- $ /usr/sbin/debootstrap --arch ARCH sarge \
-     /mnt/debinst http://http.us.debian.org/debian
-
-</screen></informalexample>
-
-</para>
-
-  </sect2>
-
-  <sect2>
-  <title>Configure The Base System</title>
-
-<para>
-
-Now you've got a real Debian system, though rather lean, on disk.
-<command>Chroot</command> into it:
-
-<informalexample><screen>
-
- $ chroot /mnt/debinst /bin/bash
-
-</screen></informalexample>
-</para>
-
-   <sect3>
-   <title>Mount Partitions</title>
-<para>
-
-You need to create <filename>/etc/fstab</filename>.
-
-<informalexample><screen>
-
- # editor /etc/fstab
-
-</screen></informalexample>
-
-</para><para>
-
-Here is a sample you can modify to suit:
-
-<informalexample><screen>
-
-# /etc/fstab: static file system information.
-#
-# file system    mount point   type    options                  dump pass
-/dev/XXX         /             ext2    defaults                 0    0
-/dev/XXX         /boot         ext2    ro,nosuid,nodev          0    2
-
-/dev/XXX         none          swap    sw                       0    0
-proc             /proc         proc    defaults                 0    0
-
-/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0
-/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0
-
-/dev/XXX         /tmp          ext2    rw,nosuid,nodev          0    2
-/dev/XXX         /var          ext2    rw,nosuid,nodev          0    2
-/dev/XXX         /usr          ext2    rw,nodev                 0    2
-/dev/XXX         /home         ext2    rw,nosuid,nodev          0    2
-
-</screen></informalexample>
-
-</para><para>
-
-Use <userinput>mount -a</userinput> to mount all the file systems you
-have specified in your <filename>/etc/fstab</filename>, or to mount
-file systems individually use:
-
-<informalexample><screen>
-
- # mount /path  # e.g.:  mount /usr
-
-</screen></informalexample>
-
-</para><para>
-
-You can mount the proc file system multiple times and to arbitrary
-locations, though /proc is customary. If you didn't use
-<userinput>mount -a</userinput>, be sure to mount proc before
-continuing:
-
-<informalexample><screen>
-
- # mount -t proc proc /proc
-
-</screen></informalexample>
-
-</para>
-
-   </sect3>
-
-   <sect3>
-   <title>Configure Keyboard</title>
-
-<para>
-
-To configure your keyboard:
-
-<informalexample><screen>
-
- # dpkg-reconfigure console-data
-
-</screen></informalexample>
-
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Networking</title>
-<para>
-
-To configure networking, edit
-<filename>/etc/network/interfaces</filename>,
-<filename>/etc/resolv.conf</filename>, and
-<filename>/etc/hostname</filename>.
-
-<informalexample><screen>
-
- # editor /etc/network/interfaces 
-
-</screen></informalexample>
-
-</para><para>
-
-Here are some simple examples from
-<filename>/usr/share/doc/ifupdown/examples</filename>:
-
-<informalexample><screen>
-######################################################################
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-# See the interfaces(5) manpage for information on what options are 
-# available.
-######################################################################
-
-# We always want the loopback interface.
-#
-auto lo
-iface lo inet loopback
-
-# To use dhcp:
-#
-# auto eth0
-# iface eth0 inet dhcp
-
-# An example static IP setup: (broadcast and gateway are optional)
-#
-# auto eth0
-# iface eth0 inet static
-#     address 192.168.0.42
-#     network 192.168.0.0
-#     netmask 255.255.255.0
-#     broadcast 192.168.0.255
-#     gateway 192.168.0.1
-</screen></informalexample>
-
-</para><para>
-
-Enter your nameserver(s) and search directives in
-<filename>/etc/resolv.conf</filename>:
-
-<informalexample><screen>
-
- # editor /etc/resolv.conf
-
-</screen></informalexample>
-
-</para><para>
-
-A simple <filename>/etc/resolv.conf</filename>:
-
-<informalexample><screen>
-
-# search hqdom.local\000
-# nameserver 10.1.1.36
-# nameserver 192.168.9.100
-
-</screen></informalexample>
-
-</para><para>
-
-Enter your system's host name (2 to 63 characters):
-
-<informalexample><screen>
-
- # echo DebianHostName &#62; /etc/hostname
-
-</screen></informalexample>
-
-</para><para>
-
-If you have multiple network cards, you should arrange the names of
-driver modules in the <filename>/etc/modules</filename> file into the
-desired order. Then during boot, each card will be associated with the
-interface name (eth0, eth1, etc.) that you expect.
-
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Timezone, Users, and APT</title>
-
-<para>
-
-Set your timezone, add a normal user, and choose your <command>apt</command>
-sources by running
-
-<informalexample><screen>
-
- # /usr/sbin/base-config new
-
-</screen></informalexample>
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Locales</title>
-<para>
-
-To configure your locale settings to use a language other than
-English, install the locales support package and configure it:
-
-<informalexample><screen>
-
- # apt-get install locales
- # dpkg-reconfigure locales
-
-</screen></informalexample>
-
-NOTE: Apt must be configured before, ie. during the base-config phase.
-Before using locales with character sets other than ASCII or latin1,
-please consult the appropriate localisation HOWTO.
-
-</para>
-   </sect3>
-  </sect2>
-
-  <sect2>
-  <title>Install a Kernel</title>
-
-<para>
-
-If you intend to boot this system, you probably want a Linux kernel
-and a boot loader. Identify available pre-packaged kernels with
-
-<informalexample><screen>
-
- # apt-cache search kernel-image
-
-</screen></informalexample>
-
-</para><para>
-
-Then install your choice using its package name.
-
-<informalexample><screen>
-
- # apt-get install kernel-image-2.X.X-arch-etc
-
-</screen></informalexample>
-
-</para>
-  </sect2>
-
-  <sect2>
-<title>Set up the Boot Loader</title>
-<para>
-
-To make your &debian; system bootable, set up your boot loader to load
-the installed kernel with your new root partition. Note that debootstrap
-does not install a boot loader, though you can use apt-get inside your
-Debian chroot to do so.
-
-</para><para arch="x86">
-
-Check <userinput>info grub</userinput> or <userinput>man
-lilo.conf</userinput> for instructions on setting up the
-bootloader.  If you are keeping the system you used to install Debian, just
-add an entry for the Debian install to your existing grub
-<filename>menu.lst</filename> or <filename>lilo.conf</filename>.  For
-<filename>lilo.conf</filename>, you could also copy it to the new system and
-edit it there. After you are done editing, call lilo (remember it will use
-<filename>lilo.conf</filename> relative to the system you call it from).
-
-</para><para arch="x86">
-
-Here is a basic <filename>/etc/lilo.conf</filename> as an example:
-
-<informalexample><screen>
-
-boot=/dev/hda6
-root=/dev/hda6
-install=/boot/boot-menu.b
-delay=20
-lba32
-image=/vmlinuz
-label=Debian
-
-</screen></informalexample>
-
-</para><para arch="powerpc">
-
-Check <userinput>man yaboot.conf</userinput> for instructions on
-setting up the bootloader.  If you are keeping the system you used to
-install Debian, just add an entry for the Debian install to your
-existing <filename>yaboot.conf</filename>.  You could also copy it to
-the new system and
-edit it there. After you are done editing, call ybin (remember it will
-use <filename>yaboot.conf</filename> relative to the system you call it from).
-
-</para><para arch="powerpc">
-
-Here is a basic <filename>/etc/yaboot.conf</filename> as an example:
-
-<informalexample><screen>
-
-boot=/dev/hda2
-device=hd:
-partition=6
-root=/dev/hda6
-magicboot=/usr/lib/yaboot/ofboot
-timeout=50
-image=/vmlinux
-label=Debian
-
-</screen></informalexample>
-
-On some machines, you may need to use <userinput>ide0:</userinput> 
-instead of <userinput>hd:</userinput>. 
-
-</para>
-  </sect2>
- </sect1>
diff --git a/da/appendix/example-preseed.xml b/da/appendix/example-preseed.xml
deleted file mode 100644
index 0773c6829..000000000
--- a/da/appendix/example-preseed.xml
+++ /dev/null
@@ -1,321 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22842 untranslated -->
-
-<sect1 id="example-preseed">
-<title>Preconfiguration File Example</title>
-
-<para>
-
-This is a complete working example of a preconfiguration file for an automated
-install. Its use is explained in <xref linkend="automatic-install"/>. You
-may want to uncomment some of the lines before using the file.
-
-</para>
-
-<informalexample><screen>
-#### Modifying syslinux.cfg.
-
-# Edit the syslinux.cfg (or similar) file, and add parameters to the end
-# of the append line(s) for the kernel.
-#
-# You'll at least want to add a parameter telling the installer where to
-# get its preseed file from.
-# If you're installing from USB media, use this, and put the preseed file
-# in the toplevel directory of the USB stick.
-#   preseed/file=/hd-media/preseed
-# If you're netbooting, use this instead:
-#   preseed/url=http://host/path/to/preseed
-# If you're remastering a CD, you could use this:
-#   preseed/file=/cdrom/preseed
-# Be sure to copy this file to the location you specify.
-# 
-# While you're at it, you may want to throw a debconf/priority=critical in
-# there, to avoid most questions even if the preseeding below misses some.
-# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit
-# enter to boot the installer.
-#
-# Language, country, and keyboard selection cannot be preseeded from a file,
-# because the questions are asked before the preseed file can be loaded.
-# Instead, to avoid these questions, pass some more parameters to the kernel:
-#
-#    languagechooser/language-name=English
-#    countrychooser/shortlist=US
-#    console-keymaps-at/keymap=us
-
-#### Shell commands.
-
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preseed file like this one. Only use preseed files from trusted
-# locations! To drive that home, and because it's generally useful, here's
-# a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i	preseed/early_command		string wget http://url/to/my.udeb -O /tmp/my.udeb ; udpkg -i /tmp/my.udeb
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory.
-#d-i	preseed/late_command		string for deb in /hd-media/*.deb; do cp $deb /target/tmp; chroot /target dpkg -i /tmp/$(basename $deb); done
-# This command is run just as base-config is starting up.
-#base-config	base-config/early_command	string echo hi mom
-# This command is run after base-config is done, just before the login:
-# prompt. This is a good way to install a set of packages you want, or to
-# tweak the configuration of the system.
-#base-config	base-config/late_command	string apt-get install zsh; chsh -s /bin/zsh
-
-#### Network configuration.
-
-# Of course, this won't work if you're loading your preseed file from the
-# network! But it's great if you're booting from CD or USB stick. You can
-# also pass network config parameters in on the kernel params if you are
-# loading preseed files from the network.
-
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i	netcfg/choose_interface select auto
-
-# If you prefer to configure the network manually, here's how:
-#d-i	netcfg/disable_dhcp	boolean true
-#d-i	netcfg/get_nameservers	string 192.168.1.1
-#d-i	netcfg/get_ipaddress	string 192.168.1.42
-#d-i	netcfg/get_netmask	string 255.255.255.0
-#d-i	netcfg/get_gateway	string 192.168.1.1
-#d-i	netcfg/confirm_static	boolean true
-
-# Note that any hostname and domain names assigned from dhcp take
-# precidence over values set here. However, setting the values still
-# prevents the questions from being shown even if values come from dhcp.
-d-i	netcfg/get_hostname	string unassigned-hostname
-d-i	netcfg/get_domain	string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i	netcfg/wireless_wep	string 
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i	netcfg/dhcp_hostname	string radish
-
-#### Mirror settings.
-
-d-i	mirror/country		string enter information manually
-d-i	mirror/http/hostname	string http.us.debian.org
-d-i	mirror/http/directory	string /debian
-d-i	mirror/suite		string testing
-d-i	mirror/http/proxy	string 
-
-### Partitioning.
-
-# If the system has free space you can choose to only partition that space.
-#d-i	partman-auto/init_automatically_partition	select Use the largest continuous free space
-# Alternatively, you can specify a disk to partition. The device name can
-# be given in either devfs or traditional non-devfs format.
-# For example, to use the first disk devfs knows of:
-d-i	partman-auto/disk	string /dev/discs/disc0/disc
-
-# You can choose from any of the predefined partitioning recipes:
-d-i	partman-auto/choose_recipe	select All files in one partition (recommended for new users)
-#d-i	partman-auto/choose_recipe	select Desktop machine
-#d-i	partman-auto/choose_recipe	select Multi-user workstation
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i	partman-auto/expert_recipe_file	string /hd-media/recipe
-# If not, you can put an entire recipe in one line. This example creates
-# a small /boot partition, suitable swap, and uses the rest of the space
-# for the root partition:
-#d-i	partman-auto/expert_recipe	string boot-root :: 20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } .  500 10000 1000000000 ext3 method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / } .  64 512 300% linux-swap method{ swap } format{ } . 
-# For reference, here is that same recipe in a more readable form:
-# 	boot-root ::
-# 	40 50 100 ext3
-#		$primary{ } $bootable{ }
-#		method{ format } format{ }
-#		use_filesystem{ } filesystem{ ext3 }
-#		mountpoint{ /boot }
-#	.
-# 	500 10000 1000000000 ext3
-#		method{ format } format{ }
-#		use_filesystem{ } filesystem{ ext3 }
-#		mountpoint{ / }
-#	.
-# 	64 512 300% linux-swap
-#		method{ swap } format{ }
-#	.
-
-# This makes partman automatically partition without confirmation.
-d-i	partman/choose_partition	select Finish partitioning and write changes to disk
-d-i	partman/confirm			boolean	true
-
-#### Boot loader installation.
-
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i	grub-installer/skip		boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i	grub-installer/only_debian	boolean true
-# This one makes grub-installer install to the MBR if if finds some other OS
-# too, which is less safe as it might not be able to boot that other OS.
-d-i	grub-installer/with_other_os	boolean true
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i	grub-installer/bootdev		string (hd0,0)
-#d-i	grub-installer/only-debian	boolean false
-#d-i	grub-installer/with_other_os	boolean false
-
-##### Finishing up the first stage install.
-
-# Avoid that last message about the install being complete.
-d-i	finish-install/reboot_in_progress	note 
-
-
-##### Preseeding base-config.
-# XXX: Note that most of this will not work right until base-config 2.40.4
-# is available.
-
-# Avoid the intorductory message.
-base-config	base-config/intro	note 
-
-# Avoid the final message.
-base-config	base-config/login	note 
-
-# If you installed a display manager, but don't want to start it immediately
-# after base-config finishes.
-#base-config	base-config/start-display-manager	boolean false
-
-###### Time zone setup.
-
-# Controls whether or not the hardware clock is set to GMT.
-base-config	tzconfig/gmt		boolean true
-
-# If you told the installer that you're in the United States, then you
-# can set the time zone using this variable.
-# (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii,
-# Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, other)
-base-config	tzconfig/choose_country_zone/US	select Eastern
-# If you told it you're in Canada.
-# (Choices are: Newfoundland, Atlantic, Eastern, Central,
-# East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other)
-base-config	tzconfig/choose_country_zone/CA	select Eastern
-# If you told it you're in Brazil. (Choices are: East, West, Acre,
-# DeNoronha, other)
-base-config	tzconfig/choose_country_zone/BR	select East
-# Many countries have only one time zone. If you told the installer you're
-# in one of those countries, you can choose its standard time zone via this
-# question.
-base-config	tzconfig/choose_country_zone_single boolean true
-# This question is asked as a fallback for countries other than those
-# listed above, which have more than one time zone. You can preseed one of
-# the time zones, or "other".
-#base-config	tzconfig/choose_country_zone_multiple select 
-
-###### Account setup.
-
-# To preseed the root password, you have to put it in the clear in this
-# file. That is not a very good idea, use caution!
-#passwd		passwd/root-password		password r00tme
-#passwd		passwd/root-password-again	password r00tme
-
-# If you want to skip creation of a normal user account.
-#passwd		passwd/make-user		boolean false
-# Alternatively, you can preseed the user's name. Note that the username
-# will be derived from this; it cannot be overridden currently. The
-# username will be the (lowercase) first name of the full name.
-#passwd		passwd/user-fullname		string Debian User
-#passwd		passwd/username			string 
-# And their password, but use caution!
-#passwd		passwd/user-password		password insecure
-#passwd		passwd/user-password-again	password insecure
-
-###### Apt setup.
-
-# This question controls what source the second stage installation uses
-# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list
-# by hand
-base-config	apt-setup/uri_type	select http
-
-# If you choose ftp or http, you'll be asked for a country and a mirror.
-base-config	apt-setup/country	select enter information manually
-base-config	apt-setup/hostname	string http.us.debian.org
-base-config	apt-setup/directory	string /debian
-# Stop after choosing one mirror.
-base-config	apt-setup/another	boolean false
-
-# You can choose to install non-free and contrib software.
-#base-config	apt-setup/non-free	boolean true
-#base-config	apt-setup/contrib	boolean true
-
-# Do enable security updates.
-base-config	apt-setup/security-updates	boolean true
-
-###### Package selection.
-
-# You can choose to install any combination of tasks that are available.
-# Available tasks as of this writing include: Desktop environment,
-# Web server, Print server, DNS server, File server, Mail server, 
-# SQL database, manual package selection. The last of those will run
-# aptitude. You can also choose to install no tasks, and force the
-# installation of a set of packages in some other way.
-# XXX: this will not work until tasksel 2.12 is available
-tasksel		tasksel/first	multiselect Desktop environment
-#tasksel	tasksel/first	multiselect Web server, Mail server, DNS server
-
-###### Mailer configuration.
-
-# During a normal install, exim asks only two questions. Here's how to
-# avoid even those. More complicated preseeding is possible.
-exim4-config	exim4/dc_eximconfig_configtype	select no configuration at this time
-# It's a good idea to set this to whatever user account you choose to
-# create. Leaving the value blank results in postmaster mail going to
-# /var/mail/mail.
-exim4-config	exim4/dc_postmaster		string 
-
-###### X Configuration.
-
-# Preseeding Debian's X config is possible, but you probably need to know
-# some details about the video hardware of the machine, since Debian's X
-# configurator does not do fully automatic configuration of everything.
-
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xfree86	xserver-xfree86/config/device/driver	select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xfree86	xserver-xfree86/autodetect_mouse	boolean true
-
-# Monitor autodetection is recommended.
-xserver-xfree86		xserver-xfree86/autodetect_monitor	boolean true
-# Uncomment if you have a LCD display.
-#xserver-xfree86	xserver-xfree86/config/monitor/lcd	boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xfree86	xserver-xfree86/config/monitor/selection-method	select medium
-xserver-xfree86	xserver-xfree86/config/monitor/mode-list	select 1024x768 @ 60 Hz
-
-###### Everything else.
-
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-#   debconf-get-selections --installer > file
-#   debconf-get-selections >> file
-
-# If you like, you can include other preseed files into this one.
-# Any settings in those files will override pre-existing settings from this
-# file. More that one file can be listed, separated by spaces; all will be
-# loaded. The included files can have preseed/include directives of their
-# own as well. Note that if the filenames are relative, they are taken from
-# the same directory as the preseed file that includes them.
-#d-i	preseed/include	string x.cfg
-# More flexably, this runs a shell command and if it outputs the names of
-# preseed files, includes those files. For example, to switch configs based
-# on a particular usb storage device (in this case, a built-in card reader):
-#d-i	preseed/include_command	string if $(grep -q "GUID: 0aec3050aec305000001a003"  /proc/scsi/usb-storage-*/*); then echo kraken.cfg; else echo otherusb.cfg; fi
-</screen></informalexample>
-
-</sect1>
diff --git a/da/appendix/files.xml b/da/appendix/files.xml
deleted file mode 100644
index 7637513a3..000000000
--- a/da/appendix/files.xml
+++ /dev/null
@@ -1,214 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 18647 untranslated -->
-
-
- <sect1 id="linuxdevices"><title>Linux Devices</title>
-<para>
-
-In Linux you have various special files in
-<filename>/dev</filename>. These files are called devices files. In
-the Unix world accessing hardware is different.  There you have a
-special file which actually runs a driver which in turn accesses the
-hardware. The device file is an interface to the actual system
-component. Files under <filename>/dev</filename> also behave
-differently than ordinary files. Below are the most important device
-files listed.
-
-</para><para>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>fd0</filename></entry>
-  <entry>First Floppy Drive</entry>
-</row><row>
-  <entry><filename>fd1</filename></entry>
-  <entry>Second Floppy Drive</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>hda</filename></entry>
-  <entry>IDE Hard disk / CD-ROM on the first IDE port (Master)</entry>
-</row><row>
-  <entry><filename>hdb</filename></entry>
-  <entry>IDE Hard disk / CD-ROM on the first IDE port (Slave)</entry>
-</row><row>
-  <entry><filename>hdc</filename></entry>
-  <entry>IDE Hard disk / CD-ROM on the second IDE port (Master)</entry>
-</row><row>
-  <entry><filename>hdd</filename></entry>
-  <entry>IDE Hard disk / CD-ROM on the second IDE port (Slave)</entry>
-</row><row>
-  <entry><filename>hda1</filename></entry>
-  <entry>First partition of the first IDE hard disk</entry>
-</row><row>
-  <entry><filename>hdd15</filename></entry>
-  <entry>Fifteenth partition of the fourth IDE hard disk</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>sda</filename></entry>
-  <entry>SCSI Hard disk with lowest SCSI ID (e.g. 0)</entry>
-</row><row>
-  <entry><filename>sdb</filename></entry>
-  <entry>SCSI Hard disk with next higher SCSI ID (e.g. 1)</entry>
-</row><row>
-  <entry><filename>sdc</filename></entry>
-  <entry>SCSI Hard disk with next higher SCSI ID (e.g. 2)</entry>
-</row><row>
-  <entry><filename>sda1</filename></entry>
-  <entry>First partition of the first SCSI hard disk</entry>
-</row><row>
-  <entry><filename>sdd10</filename></entry>
-  <entry>Tenth partition of the fourth SCSI hard disk</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>sr0</filename></entry>
-  <entry>SCSI CD-ROM with the lowest SCSI ID</entry>
-</row><row>
-  <entry><filename>sr1</filename></entry>
-  <entry>SCSI CD-ROM with the next higher SCSI ID</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>ttyS0</filename></entry>
-  <entry>Serial port 0, COM1 under MS-DOS</entry>
-</row><row>
-  <entry><filename>ttyS1</filename></entry>
-  <entry>Serial port 1, COM2 under MS-DOS</entry>
-</row><row>
-  <entry><filename>psaux</filename></entry>
-  <entry>PS/2 mouse device</entry>
-</row><row>
-  <entry><filename>gpmdata</filename></entry>
-  <entry>Pseudo device, repeater data from GPM (mouse) daemon</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>cdrom</filename></entry>
-  <entry>Symbolic link to the CD-ROM drive</entry>
-</row><row>
-  <entry><filename>mouse</filename></entry>
-  <entry>Symbolic link to the mouse device file</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-<informaltable><tgroup cols="2"><tbody>
-<row>
-  <entry><filename>null</filename></entry>
-  <entry>Everything pointed to this device will disappear</entry>
-</row><row>
-  <entry><filename>zero</filename></entry>
-  <entry>One can endlessly read zeros out of this device</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para>
-
-  <sect2>
-<title>Setting Up Your Mouse</title>
-
-<para>
-
-The mouse can be used in both the Linux console (with gpm) and the X window
-environment. The two uses can be made compatible if the gpm repeater is used
-to allow the signal to flow to the X server as shown:
-<informalexample><screen>
-mouse =&#62; /dev/psaux  =&#62; gpm =&#62; /dev/gpmdata -&#62; /dev/mouse =&#62; X
-         /dev/ttyS0             (repeater)        (symlink)
-         /dev/ttyS1
-</screen></informalexample>
-
-</para><para>
-
-Set the repeater protocol to be raw (in <filename>/etc/gpm.conf</filename>) while
-setting X to the original mouse protocol in <filename>/etc/X11/XF86Config</filename>
-or <filename>/etc/X11/XF86Config-4</filename>.
-
-</para><para>
-
-This approach to use gpm even in X has advantages when the mouse is
-unplugged inadvertently.  Simply restarting gpm with
-<informalexample><screen>
-user@debian:# /etc/init.d/gpm restart
-</screen></informalexample>
-will re-connect the mouse in software without restarting X.
-
-</para><para>
-
-If gpm is disabled or not installed with some reason, make sure to set X to
-read directly from the mouse device such as /dev/psaux. For details, refer
-to the 3-Button Mouse mini-Howto at
-<filename>/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz</filename>, 
-<userinput>man gpm</userinput>, 
-<filename>/usr/share/doc/gpm/FAQ.gz</filename>, and 
-<ulink url="&url-xfree86;current/mouse.html">README.mouse</ulink>.
-
-</para><para arch="powerpc">
-
-For PowerPC, in <filename>/etc/X11/XF86Config</filename> or
-<filename>/etc/X11/XF86Config-4</filename>, set the mouse device to
-<userinput>"/dev/input/mice"</userinput>. 
-
-</para><para arch="powerpc">
-
-Modern kernels give you the capability to emulate a three-button mouse
-when your mouse only has one button. Just add the following lines to
-<filename>/etc/sysctl.conf</filename> file.
-
-<informalexample><screen>
-
-# 3-button mouse emulation 
-# turn on emulation
-/dev/mac_hid/mouse_button_emulation = 1
-# Send middle mouse button signal with the F11 key
-/dev/mac_hid/mouse_button2_keycode = 87
-# Send right mouse button signal with the F12 key
-/dev/mac_hid/mouse_button3_keycode = 88
-# For different keys, use showkey to tell you what the code is.
-
-</screen></informalexample>  
-</para>
-  </sect2>
- </sect1>
-
- <sect1 id="tasksel-size-list">
- <title>Disk Space Needed for Tasks</title>
-<para>
-
-The base sarge installation for i386, including all standard packages,
-requires 178MB of disk space.
-
-</para><para>
-
-The following table lists sizes reported by aptitude for the tasks listed in
-tasksel. Note that some tasks have overlapping constituents, so the total
-installed size for two tasks together may be less than the total obtained by
-adding the numbers up. 
-
-</para><para>
-
-<informalexample><screen>
-Task                              Installed  Download   Space Needed 
-                                  Size (MB)  Size (MB)  To Install (MB)
-
-Desktop                            1537        521        2058
-Web server                           71         21          92
-Print server                        240         83         323
-Mail server                          41         12          53
-File server                          85         34         119
-SQL database                        108         33         141
-
-</screen></informalexample>
-</para>
- </sect1>
diff --git a/da/appendix/gpl.xml b/da/appendix/gpl.xml
deleted file mode 100644
index 66dc64386..000000000
--- a/da/appendix/gpl.xml
+++ /dev/null
@@ -1,513 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22661 untranslated -->
-
-<appendix id="appendix-gpl"><title>GNU General Public License</title>
-
-<para>
-
-Version 2, June 1991
-
-</para><para>
-
-Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-&mdash;
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-</para><para>
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-
-</para>
-
- <sect1><title>Preamble</title>
-<para>
-
-The licenses for most software are designed to take away your freedom
-to share and change it. By contrast, the gnu General Public License
-is intended to guarantee your freedom to share and change free
-software - to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit
-to using it. (Some other Free Software Foundation software is covered
-by the gnu Library General Public License instead.) You can apply it
-to your programs, too.
-
-</para><para>
-
-When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge
-for this service if you wish), that you receive source code or can
-get it if you want it, that you can change the software or use pieces
-of it in new free programs; and that you know you can do these
-things.
-
-</para><para>
-
-To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the
-rights. These restrictions translate to certain responsibilities for
-you if you distribute copies of the software, or if you modify it.
-
-</para><para>
-
-For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
-</para><para>
-
-We protect your rights with two steps: (1) copyright the software,
-and (2) offer you this license which gives you legal permission to
-copy, distribute and/or modify the software.
-
-</para><para>
-
-Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on,
-we want its recipients to know that what they have is not the
-original, so that any problems introduced by others will not reflect
-on the original authors' reputations.
-
-</para><para>
-
-Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making
-the program proprietary. To prevent this, we have made it clear that
-any patent must be licensed for everyone's free use or not licensed
-at all.
-
-</para><para>
-
-The precise terms and conditions for copying, distribution and
-modification follow.
-
-</para>
- </sect1>
-
- <sect1><title>GNU GENERAL PUBLIC LICENSE</title>
-<para>
-
-TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-</para>
-
-<itemizedlist><listitem><para>
-
-This License applies to any program or other work which contains a
-notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-</para><para>
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the
-Program is covered only if its contents constitute a work based on
-the Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-</para></listitem>
-<listitem><para>
-
-You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any
-warranty; and give any other recipients of the Program a copy of this
-License along with the Program.
-
-</para><para>
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a
-fee.
-
-</para></listitem>
-<listitem><para>
-
-You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-</para><para>
-
-a) You must cause the modified files to carry prominent notices
-stating that you changed the files and the date of any change.
-
-</para><para>
-
-b) You must cause any work that you distribute or publish, that in
-whole or in part contains or is derived from the Program or any part
-thereof, to be licensed as a whole at no charge to all third parties
-under the terms of this License.
-
-</para><para>
-
-c) If the modified program normally reads commands interactively when
-run, you must cause it, when started running for such interactive use
-in the most ordinary way, to print or display an announcement
-including an appropriate copyright notice and a notice that there is
-no warranty (or else, saying that you provide a warranty) and that
-users may redistribute the program under these conditions, and
-telling the user how to view a copy of this License. (Exception: if
-the Program itself is interactive but does not normally print such an
-announcement, your work based on the Program is not required to print
-an announcement.)
-
-</para><para>
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-</para><para>
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-</para><para>
-
-In addition, mere aggregation of another work not based on the
-Program with the Program (or with a work based on the Program) on a
-volume of a storage or distribution medium does not bring the other
-work under the scope of this License.
-
-</para></listitem>
-<listitem><para>
-
-You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the
-following:
-
-</para><para>
-
-a) Accompany it with the complete corresponding machine-readable
-source code, which must be distributed under the terms of Sections 1
-and 2 above on a medium customarily used for software interchange;
-or,
-
-</para><para>
-
-b) Accompany it with a written offer, valid for at least three years,
-to give any third party, for a charge no more than your cost of
-physically performing source distribution, a complete
-machine-readable copy of the corresponding source code, to be
-distributed under the terms of Sections 1 and 2 above on a medium
-customarily used for software interchange; or,
-
-</para><para>
-
-c) Accompany it with the information you received as to the offer to
-distribute corresponding source code. (This alternative is allowed
-only for noncommercial distribution and only if you received the
-program in object code or executable form with such an offer, in
-accord with Subsection b above.)
-
-</para><para>
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-</para><para>
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-</para></listitem>
-<listitem><para>
-
-You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this
-License. However, parties who have received copies, or rights, from
-you under this License will not have their licenses terminated so
-long as such parties remain in full compliance.
-
-</para></listitem>
-<listitem><para>
-
-You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-</para></listitem>
-<listitem><para>
-
-Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject
-to these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted
-herein. You are not responsible for enforcing compliance by third
-parties to this License.
-
-</para></listitem>
-<listitem><para>
-
-If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do
-not excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under
-this License and any other pertinent obligations, then as a
-consequence you may not distribute the Program at all. For example,
-if a patent license would not permit royalty-free redistribution of
-the Program by all those who receive copies directly or indirectly
-through you, then the only way you could satisfy both it and this
-License would be to refrain entirely from distribution of the
-Program.
-
-</para><para>
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended
-to apply and the section as a whole is intended to apply in other
-circumstances.
-
-</para><para>
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is
-willing to distribute software through any other system and a
-licensee cannot impose that choice.
-
-</para><para>
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-</para></listitem>
-<listitem><para>
-
-If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-</para></listitem>
-<listitem><para>
-
-The Free Software Foundation may publish revised and/or new
-versions of the General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns. Each version is
-given a distinguishing version number. If the Program specifies a
-version number of this License which applies to it and "any later
-version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number
-of this License, you may choose any version ever published by the
-Free Software Foundation.
-
-</para></listitem>
-<listitem><para>
-
-If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the
-author to ask for permission. For software which is copyrighted by
-the Free Software Foundation, write to the Free Software Foundation;
-we sometimes make exceptions for this. Our decision will be guided by
-the two goals of preserving the free status of all derivatives of our
-free software and of promoting the sharing and reuse of software
-generally.
-
-</para><para>
-
-NO WARRANTY
-
-</para></listitem>
-<listitem><para>
-
-because the program is licensed free of charge, there is no
-warranty for the program, to the extent permitted by applicable law.
-except when otherwise stated in writing the copyright holders and/or
-other parties provide the program "as is" without warranty of any
-kind, either expressed or implied, including, but not limited to, the
-implied warranties of merchantability and fitness for a particular
-purpose. the entire risk as to the quality and performance of the
-program is with you. should the program prove defective, you assume
-the cost of all necessary servicing, repair or correction.
-
-</para></listitem>
-<listitem><para>
-
-in no event unless required by applicable law or agreed to in
-writing will any copyright holder, or any other party who may modify
-and/or redistribute the program as permitted above, be liable to you
-for damages, including any general, special, incidental or
-consequential damages arising out of the use or inability to use the
-program (including but not limited to loss of data or data being
-rendered inaccurate or losses sustained by you or third parties or a
-failure of the program to operate with any other programs), even if
-such holder or other party has been advised of the possibility of
-such damages.
-
-</para></listitem>
-</itemizedlist>
-<para>
-
-END OF TERMS AND CONDITIONS
-
-</para>
- </sect1>
-
- <sect1><title>How to Apply These Terms to Your New Programs</title>
-<para>
-
-If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make
-it free software which everyone can redistribute and change under
-these terms.
-
-</para><para>
-
-To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-</para><para>
-
-one line to give the program's name and a brief idea of what it
-does.
-
-</para><para>
-
-Copyright (C) year name of author
-
-</para><para>
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the gnu General Public License as published by
-the Free Software Foundation; either version 2 of the License, or (at
-your option) any later version.
-
-</para><para>
-
-This program is distributed in the hope that it will be useful, but 
-without any warranty; without even the implied warranty of
-merchantability or fitness for a particular purpose. See the gnu
-General Public License for more details.
-
-</para><para>
-
-You should have received a copy of the gnu General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 
-USA.
-
-</para><para>
-
-Also add information on how to contact you by electronic and paper
-mail.
-
-</para><para>
-
-If the program is interactive, make it output a short notice like
-this when it starts in an interactive mode:
-
-</para><para>
-
-Gnomovision version 69, Copyright (C) year name of author
-
-</para><para>
-
-Gnomovision comes with absolutely no warranty; for details type `show
-w'.
-
-</para><para>
-
-This is free software, and you are welcome to redistribute it under
-certain conditions; type `show c' for details.
-
-</para><para>
-
-The hypothetical commands `show w' and `show c' should show the
-appropriate parts of the General Public License. Of course, the
-commands you use may be called something other than `show w' and
-`show c'; they could even be mouse-clicks or menu items - whatever
-suits your program.
-
-</para><para>
-
-You should also get your employer (if you work as a programmer) or
-your school, if any, to sign a "copyright disclaimer" for the
-program, if necessary. Here is a sample; alter the names:
-
-</para><para>
-
-Yoyodyne, Inc., hereby disclaims all copyright interest in the
-program `Gnomovision' (which makes passes at compilers) written by
-James Hacker.
-
-</para><para>
-
-signature of Ty Coon, 1 April 1989
-
-</para><para>
-
-Ty Coon, President of Vice
-
-</para><para>
-
-This General Public License does not permit incorporating your
-program into proprietary programs. If your program is a subroutine
-library, you may consider it more useful to permit linking
-proprietary applications with the library. If this is what you want
-to do, use the gnu Library General Public License instead of this
-License.
-
-</para>
- </sect1>
-</appendix>
diff --git a/da/appendix/random-bits.xml b/da/appendix/random-bits.xml
deleted file mode 100644
index 5dc521dc9..000000000
--- a/da/appendix/random-bits.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22661 untranslated -->
-
-<appendix id="random-bits"><title>Random Bits</title>
-
-&example-preseed.xml;
-&files.xml;
-&chroot-install.xml;
-
-</appendix>