From 325e7229b079ce8367df7a7571aad8bfc8e1e5a9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sat, 22 Aug 2009 15:52:14 +0000 Subject: Remove all untranslated documents for Danish --- da/appendix/chroot-install.xml | 498 -------------------------------------- da/appendix/example-preseed.xml | 321 ------------------------- da/appendix/files.xml | 214 ----------------- da/appendix/gpl.xml | 513 ---------------------------------------- da/appendix/random-bits.xml | 10 - 5 files changed, 1556 deletions(-) delete mode 100644 da/appendix/chroot-install.xml delete mode 100644 da/appendix/example-preseed.xml delete mode 100644 da/appendix/files.xml delete mode 100644 da/appendix/gpl.xml delete mode 100644 da/appendix/random-bits.xml (limited to 'da/appendix') diff --git a/da/appendix/chroot-install.xml b/da/appendix/chroot-install.xml deleted file mode 100644 index 104e156ec..000000000 --- a/da/appendix/chroot-install.xml +++ /dev/null @@ -1,498 +0,0 @@ - - - - - Installing &debian; from a Unix/Linux System - - - -This section explains how to install &debian; from an existing -Unix or Linux system, without using the ncurses-based, menu-driven -installer as explained in the rest of the manual. This "cross-install" -HOWTO has been requested by users switching to &debian; from -Redhat, Mandrake, and SUSE. In this section some familiarity with -entering *nix commands and navigating the file system is assumed. In -this section, $ symbolizes a command to be entered in -the user's current system, while # refers to a -command entered in the Debian chroot. - - - -Once you've got the new Debian system configured to your preference, -you can migrate your existing user data (if any) to it, and keep on -rolling. This is therefore a "zero downtime" &debian; -install. It's also a clever way for dealing with hardware that -otherwise doesn't play friendly with various boot or installation -media. - - - - - Getting Started - - -With your current *nix partitioning tools, repartition the hard -drive as needed, creating at least one filesystem plus swap. You -need at least 150MB of space available for a console only install, -or at least 300MB if you plan to install X. - - - -To create file systems on your partitions. For example, to create an -ext3 file system on partition /dev/hda6 (that's -our example root partition): - - - - $ mke2fs -j /dev/hda6 - - - -To create an ext2 file system instead, omit -j. - - - -Initialize and activate swap (substitute the partition number for -your intended Debian swap partition): - - - - $ mkswap /dev/hda5 - $ sync; sync; sync - $ swapon /dev/hda5 - - - - - -Mount one partition as /mnt/debinst (the -installation point, to be the root (/) filesystem -on your new system). The mount point name is strictly arbitrary, it is -referenced later below. - - - - $ mkdir /mnt/debinst - $ mount /dev/hda6 /mnt/debinst - - - - - - - - Install <command>debootstrap</command> - - -The tool that the Debian installer uses, which is recognized as the -official way to install a Debian base system, is -debootstrap. It uses wget, but -otherwise depends only on /bin/sh. Install -wget if it isn't already on your current system, -then download and install debootstrap. - - - -If you have an rpm-based system, you can use alien to convert the -.deb into .rpm, or download an rpm-ized version at - - - - -Or, you can use the following procedure to install it -manually. Make a work folder for extracting the .deb into: - - - - $ mkdir work - $ cd work - - - - -The debootstrap binary is located in the Debian -archive (be sure to select the proper file for your -architecture). Download the debootstrap .deb from -the -pool, copy the package to the work folder, and extract the -binary files from it. You will need to have root privileges to install -the binaries. - - - - $ ar -xf debootstrap_0.X.X_arch.deb - $ cd / - $ zcat < /full-path-to-work/work/data.tar.gz | tar xv - - - - - - - - Run <command>debootstrap</command> - - -debootstrap can download the needed files directly -from the archive when you run it. You can substitute any Debian -archive mirror for http.us.debian.org/debian in -the command example below, preferably a mirror close to you -network-wise. Mirrors are listed at -. - - - -If you have a &releasename; &debian; CD mounted at -/cdrom, you could substitute a file URL instead -of the http URL: file:/cdrom/debian/ - - - -Substitute one of the following for ARCH -in the debootstrap command: - -alpha, -arm, -hppa, -i386, -ia64, -m68k, -mips, -mipsel, -powerpc, -s390, or -sparc. - - - - $ /usr/sbin/debootstrap --arch ARCH sarge \ - /mnt/debinst http://http.us.debian.org/debian - - - - - - - - - Configure The Base System - - - -Now you've got a real Debian system, though rather lean, on disk. -Chroot into it: - - - - $ chroot /mnt/debinst /bin/bash - - - - - - Mount Partitions - - -You need to create /etc/fstab. - - - - # editor /etc/fstab - - - - - -Here is a sample you can modify to suit: - - - -# /etc/fstab: static file system information. -# -# file system mount point type options dump pass -/dev/XXX / ext2 defaults 0 0 -/dev/XXX /boot ext2 ro,nosuid,nodev 0 2 - -/dev/XXX none swap sw 0 0 -proc /proc proc defaults 0 0 - -/dev/fd0 /mnt/floppy auto noauto,rw,sync,user,exec 0 0 -/dev/cdrom /mnt/cdrom iso9660 noauto,ro,user,exec 0 0 - -/dev/XXX /tmp ext2 rw,nosuid,nodev 0 2 -/dev/XXX /var ext2 rw,nosuid,nodev 0 2 -/dev/XXX /usr ext2 rw,nodev 0 2 -/dev/XXX /home ext2 rw,nosuid,nodev 0 2 - - - - - -Use mount -a to mount all the file systems you -have specified in your /etc/fstab, or to mount -file systems individually use: - - - - # mount /path # e.g.: mount /usr - - - - - -You can mount the proc file system multiple times and to arbitrary -locations, though /proc is customary. If you didn't use -mount -a, be sure to mount proc before -continuing: - - - - # mount -t proc proc /proc - - - - - - - - - Configure Keyboard - - - -To configure your keyboard: - - - - # dpkg-reconfigure console-data - - - - - - - - Configure Networking - - -To configure networking, edit -/etc/network/interfaces, -/etc/resolv.conf, and -/etc/hostname. - - - - # editor /etc/network/interfaces - - - - - -Here are some simple examples from -/usr/share/doc/ifupdown/examples: - - -###################################################################### -# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) -# See the interfaces(5) manpage for information on what options are -# available. -###################################################################### - -# We always want the loopback interface. -# -auto lo -iface lo inet loopback - -# To use dhcp: -# -# auto eth0 -# iface eth0 inet dhcp - -# An example static IP setup: (broadcast and gateway are optional) -# -# auto eth0 -# iface eth0 inet static -# address 192.168.0.42 -# network 192.168.0.0 -# netmask 255.255.255.0 -# broadcast 192.168.0.255 -# gateway 192.168.0.1 - - - - -Enter your nameserver(s) and search directives in -/etc/resolv.conf: - - - - # editor /etc/resolv.conf - - - - - -A simple /etc/resolv.conf: - - - -# search hqdom.local\000 -# nameserver 10.1.1.36 -# nameserver 192.168.9.100 - - - - - -Enter your system's host name (2 to 63 characters): - - - - # echo DebianHostName > /etc/hostname - - - - - -If you have multiple network cards, you should arrange the names of -driver modules in the /etc/modules file into the -desired order. Then during boot, each card will be associated with the -interface name (eth0, eth1, etc.) that you expect. - - - - - - Configure Timezone, Users, and APT - - - -Set your timezone, add a normal user, and choose your apt -sources by running - - - - # /usr/sbin/base-config new - - - - - - - Configure Locales - - -To configure your locale settings to use a language other than -English, install the locales support package and configure it: - - - - # apt-get install locales - # dpkg-reconfigure locales - - - -NOTE: Apt must be configured before, ie. during the base-config phase. -Before using locales with character sets other than ASCII or latin1, -please consult the appropriate localisation HOWTO. - - - - - - - Install a Kernel - - - -If you intend to boot this system, you probably want a Linux kernel -and a boot loader. Identify available pre-packaged kernels with - - - - # apt-cache search kernel-image - - - - - -Then install your choice using its package name. - - - - # apt-get install kernel-image-2.X.X-arch-etc - - - - - - - -Set up the Boot Loader - - -To make your &debian; system bootable, set up your boot loader to load -the installed kernel with your new root partition. Note that debootstrap -does not install a boot loader, though you can use apt-get inside your -Debian chroot to do so. - - - -Check info grub or man -lilo.conf for instructions on setting up the -bootloader. If you are keeping the system you used to install Debian, just -add an entry for the Debian install to your existing grub -menu.lst or lilo.conf. For -lilo.conf, you could also copy it to the new system and -edit it there. After you are done editing, call lilo (remember it will use -lilo.conf relative to the system you call it from). - - - -Here is a basic /etc/lilo.conf as an example: - - - -boot=/dev/hda6 -root=/dev/hda6 -install=/boot/boot-menu.b -delay=20 -lba32 -image=/vmlinuz -label=Debian - - - - - -Check man yaboot.conf for instructions on -setting up the bootloader. If you are keeping the system you used to -install Debian, just add an entry for the Debian install to your -existing yaboot.conf. You could also copy it to -the new system and -edit it there. After you are done editing, call ybin (remember it will -use yaboot.conf relative to the system you call it from). - - - -Here is a basic /etc/yaboot.conf as an example: - - - -boot=/dev/hda2 -device=hd: -partition=6 -root=/dev/hda6 -magicboot=/usr/lib/yaboot/ofboot -timeout=50 -image=/vmlinux -label=Debian - - - -On some machines, you may need to use ide0: -instead of hd:. - - - - diff --git a/da/appendix/example-preseed.xml b/da/appendix/example-preseed.xml deleted file mode 100644 index 0773c6829..000000000 --- a/da/appendix/example-preseed.xml +++ /dev/null @@ -1,321 +0,0 @@ - - - - -Preconfiguration File Example - - - -This is a complete working example of a preconfiguration file for an automated -install. Its use is explained in . You -may want to uncomment some of the lines before using the file. - - - - -#### Modifying syslinux.cfg. - -# Edit the syslinux.cfg (or similar) file, and add parameters to the end -# of the append line(s) for the kernel. -# -# You'll at least want to add a parameter telling the installer where to -# get its preseed file from. -# If you're installing from USB media, use this, and put the preseed file -# in the toplevel directory of the USB stick. -# preseed/file=/hd-media/preseed -# If you're netbooting, use this instead: -# preseed/url=http://host/path/to/preseed -# If you're remastering a CD, you could use this: -# preseed/file=/cdrom/preseed -# Be sure to copy this file to the location you specify. -# -# While you're at it, you may want to throw a debconf/priority=critical in -# there, to avoid most questions even if the preseeding below misses some. -# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit -# enter to boot the installer. -# -# Language, country, and keyboard selection cannot be preseeded from a file, -# because the questions are asked before the preseed file can be loaded. -# Instead, to avoid these questions, pass some more parameters to the kernel: -# -# languagechooser/language-name=English -# countrychooser/shortlist=US -# console-keymaps-at/keymap=us - -#### Shell commands. - -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preseed file like this one. Only use preseed files from trusted -# locations! To drive that home, and because it's generally useful, here's -# a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string wget http://url/to/my.udeb -O /tmp/my.udeb ; udpkg -i /tmp/my.udeb -# This command is run just before the install finishes, but when there is -# still a usable /target directory. -#d-i preseed/late_command string for deb in /hd-media/*.deb; do cp $deb /target/tmp; chroot /target dpkg -i /tmp/$(basename $deb); done -# This command is run just as base-config is starting up. -#base-config base-config/early_command string echo hi mom -# This command is run after base-config is done, just before the login: -# prompt. This is a good way to install a set of packages you want, or to -# tweak the configuration of the system. -#base-config base-config/late_command string apt-get install zsh; chsh -s /bin/zsh - -#### Network configuration. - -# Of course, this won't work if you're loading your preseed file from the -# network! But it's great if you're booting from CD or USB stick. You can -# also pass network config parameters in on the kernel params if you are -# loading preseed files from the network. - -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# If you prefer to configure the network manually, here's how: -#d-i netcfg/disable_dhcp boolean true -#d-i netcfg/get_nameservers string 192.168.1.1 -#d-i netcfg/get_ipaddress string 192.168.1.42 -#d-i netcfg/get_netmask string 255.255.255.0 -#d-i netcfg/get_gateway string 192.168.1.1 -#d-i netcfg/confirm_static boolean true - -# Note that any hostname and domain names assigned from dhcp take -# precidence over values set here. However, setting the values still -# prevents the questions from being shown even if values come from dhcp. -d-i netcfg/get_hostname string unassigned-hostname -d-i netcfg/get_domain string unassigned-domain - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -#### Mirror settings. - -d-i mirror/country string enter information manually -d-i mirror/http/hostname string http.us.debian.org -d-i mirror/http/directory string /debian -d-i mirror/suite string testing -d-i mirror/http/proxy string - -### Partitioning. - -# If the system has free space you can choose to only partition that space. -#d-i partman-auto/init_automatically_partition select Use the largest continuous free space -# Alternatively, you can specify a disk to partition. The device name can -# be given in either devfs or traditional non-devfs format. -# For example, to use the first disk devfs knows of: -d-i partman-auto/disk string /dev/discs/disc0/disc - -# You can choose from any of the predefined partitioning recipes: -d-i partman-auto/choose_recipe select All files in one partition (recommended for new users) -#d-i partman-auto/choose_recipe select Desktop machine -#d-i partman-auto/choose_recipe select Multi-user workstation -# Or provide a recipe of your own... -# The recipe format is documented in the file devel/partman-auto-recipe.txt. -# If you have a way to get a recipe file into the d-i environment, you can -# just point at it. -#d-i partman-auto/expert_recipe_file string /hd-media/recipe -# If not, you can put an entire recipe in one line. This example creates -# a small /boot partition, suitable swap, and uses the rest of the space -# for the root partition: -#d-i partman-auto/expert_recipe string boot-root :: 20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . 500 10000 1000000000 ext3 method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / } . 64 512 300% linux-swap method{ swap } format{ } . -# For reference, here is that same recipe in a more readable form: -# boot-root :: -# 40 50 100 ext3 -# $primary{ } $bootable{ } -# method{ format } format{ } -# use_filesystem{ } filesystem{ ext3 } -# mountpoint{ /boot } -# . -# 500 10000 1000000000 ext3 -# method{ format } format{ } -# use_filesystem{ } filesystem{ ext3 } -# mountpoint{ / } -# . -# 64 512 300% linux-swap -# method{ swap } format{ } -# . - -# This makes partman automatically partition without confirmation. -d-i partman/choose_partition select Finish partitioning and write changes to disk -d-i partman/confirm boolean true - -#### Boot loader installation. - -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true -# This one makes grub-installer install to the MBR if if finds some other OS -# too, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean true -# Alternatively, if you want to install to a location other than the mbr, -# uncomment and edit these lines: -#d-i grub-installer/bootdev string (hd0,0) -#d-i grub-installer/only-debian boolean false -#d-i grub-installer/with_other_os boolean false - -##### Finishing up the first stage install. - -# Avoid that last message about the install being complete. -d-i finish-install/reboot_in_progress note - - -##### Preseeding base-config. -# XXX: Note that most of this will not work right until base-config 2.40.4 -# is available. - -# Avoid the intorductory message. -base-config base-config/intro note - -# Avoid the final message. -base-config base-config/login note - -# If you installed a display manager, but don't want to start it immediately -# after base-config finishes. -#base-config base-config/start-display-manager boolean false - -###### Time zone setup. - -# Controls whether or not the hardware clock is set to GMT. -base-config tzconfig/gmt boolean true - -# If you told the installer that you're in the United States, then you -# can set the time zone using this variable. -# (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, -# Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, other) -base-config tzconfig/choose_country_zone/US select Eastern -# If you told it you're in Canada. -# (Choices are: Newfoundland, Atlantic, Eastern, Central, -# East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other) -base-config tzconfig/choose_country_zone/CA select Eastern -# If you told it you're in Brazil. (Choices are: East, West, Acre, -# DeNoronha, other) -base-config tzconfig/choose_country_zone/BR select East -# Many countries have only one time zone. If you told the installer you're -# in one of those countries, you can choose its standard time zone via this -# question. -base-config tzconfig/choose_country_zone_single boolean true -# This question is asked as a fallback for countries other than those -# listed above, which have more than one time zone. You can preseed one of -# the time zones, or "other". -#base-config tzconfig/choose_country_zone_multiple select - -###### Account setup. - -# To preseed the root password, you have to put it in the clear in this -# file. That is not a very good idea, use caution! -#passwd passwd/root-password password r00tme -#passwd passwd/root-password-again password r00tme - -# If you want to skip creation of a normal user account. -#passwd passwd/make-user boolean false -# Alternatively, you can preseed the user's name. Note that the username -# will be derived from this; it cannot be overridden currently. The -# username will be the (lowercase) first name of the full name. -#passwd passwd/user-fullname string Debian User -#passwd passwd/username string -# And their password, but use caution! -#passwd passwd/user-password password insecure -#passwd passwd/user-password-again password insecure - -###### Apt setup. - -# This question controls what source the second stage installation uses -# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list -# by hand -base-config apt-setup/uri_type select http - -# If you choose ftp or http, you'll be asked for a country and a mirror. -base-config apt-setup/country select enter information manually -base-config apt-setup/hostname string http.us.debian.org -base-config apt-setup/directory string /debian -# Stop after choosing one mirror. -base-config apt-setup/another boolean false - -# You can choose to install non-free and contrib software. -#base-config apt-setup/non-free boolean true -#base-config apt-setup/contrib boolean true - -# Do enable security updates. -base-config apt-setup/security-updates boolean true - -###### Package selection. - -# You can choose to install any combination of tasks that are available. -# Available tasks as of this writing include: Desktop environment, -# Web server, Print server, DNS server, File server, Mail server, -# SQL database, manual package selection. The last of those will run -# aptitude. You can also choose to install no tasks, and force the -# installation of a set of packages in some other way. -# XXX: this will not work until tasksel 2.12 is available -tasksel tasksel/first multiselect Desktop environment -#tasksel tasksel/first multiselect Web server, Mail server, DNS server - -###### Mailer configuration. - -# During a normal install, exim asks only two questions. Here's how to -# avoid even those. More complicated preseeding is possible. -exim4-config exim4/dc_eximconfig_configtype select no configuration at this time -# It's a good idea to set this to whatever user account you choose to -# create. Leaving the value blank results in postmaster mail going to -# /var/mail/mail. -exim4-config exim4/dc_postmaster string - -###### X Configuration. - -# Preseeding Debian's X config is possible, but you probably need to know -# some details about the video hardware of the machine, since Debian's X -# configurator does not do fully automatic configuration of everything. - -# X can detect the right driver for some cards, but if you're preseeding, -# you override whatever it chooses. Still, vesa will work most places. -#xserver-xfree86 xserver-xfree86/config/device/driver select vesa - -# A caveat with mouse autodetection is that if it fails, X will retry it -# over and over. So if it's preseeded to be done, there is a possibility of -# an infinite loop if the mouse is not autodetected. -#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true - -# Monitor autodetection is recommended. -xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true -# Uncomment if you have a LCD display. -#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true -# X has three configuration paths for the monitor. Here's how to preseed -# the "medium" path, which is always available. The "simple" path may not -# be available, and the "advanced" path asks too many questions. -xserver-xfree86 xserver-xfree86/config/monitor/selection-method select medium -xserver-xfree86 xserver-xfree86/config/monitor/mode-list select 1024x768 @ 60 Hz - -###### Everything else. - -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - -# If you like, you can include other preseed files into this one. -# Any settings in those files will override pre-existing settings from this -# file. More that one file can be listed, separated by spaces; all will be -# loaded. The included files can have preseed/include directives of their -# own as well. Note that if the filenames are relative, they are taken from -# the same directory as the preseed file that includes them. -#d-i preseed/include string x.cfg -# More flexably, this runs a shell command and if it outputs the names of -# preseed files, includes those files. For example, to switch configs based -# on a particular usb storage device (in this case, a built-in card reader): -#d-i preseed/include_command string if $(grep -q "GUID: 0aec3050aec305000001a003" /proc/scsi/usb-storage-*/*); then echo kraken.cfg; else echo otherusb.cfg; fi - - - diff --git a/da/appendix/files.xml b/da/appendix/files.xml deleted file mode 100644 index 7637513a3..000000000 --- a/da/appendix/files.xml +++ /dev/null @@ -1,214 +0,0 @@ - - - - - Linux Devices - - -In Linux you have various special files in -/dev. These files are called devices files. In -the Unix world accessing hardware is different. There you have a -special file which actually runs a driver which in turn accesses the -hardware. The device file is an interface to the actual system -component. Files under /dev also behave -differently than ordinary files. Below are the most important device -files listed. - - - - - - fd0 - First Floppy Drive - - fd1 - Second Floppy Drive - - - - - - hda - IDE Hard disk / CD-ROM on the first IDE port (Master) - - hdb - IDE Hard disk / CD-ROM on the first IDE port (Slave) - - hdc - IDE Hard disk / CD-ROM on the second IDE port (Master) - - hdd - IDE Hard disk / CD-ROM on the second IDE port (Slave) - - hda1 - First partition of the first IDE hard disk - - hdd15 - Fifteenth partition of the fourth IDE hard disk - - - - - - sda - SCSI Hard disk with lowest SCSI ID (e.g. 0) - - sdb - SCSI Hard disk with next higher SCSI ID (e.g. 1) - - sdc - SCSI Hard disk with next higher SCSI ID (e.g. 2) - - sda1 - First partition of the first SCSI hard disk - - sdd10 - Tenth partition of the fourth SCSI hard disk - - - - - - sr0 - SCSI CD-ROM with the lowest SCSI ID - - sr1 - SCSI CD-ROM with the next higher SCSI ID - - - - - - ttyS0 - Serial port 0, COM1 under MS-DOS - - ttyS1 - Serial port 1, COM2 under MS-DOS - - psaux - PS/2 mouse device - - gpmdata - Pseudo device, repeater data from GPM (mouse) daemon - - - - - - cdrom - Symbolic link to the CD-ROM drive - - mouse - Symbolic link to the mouse device file - - - - - - null - Everything pointed to this device will disappear - - zero - One can endlessly read zeros out of this device - - - - - - -Setting Up Your Mouse - - - -The mouse can be used in both the Linux console (with gpm) and the X window -environment. The two uses can be made compatible if the gpm repeater is used -to allow the signal to flow to the X server as shown: - -mouse => /dev/psaux => gpm => /dev/gpmdata -> /dev/mouse => X - /dev/ttyS0 (repeater) (symlink) - /dev/ttyS1 - - - - -Set the repeater protocol to be raw (in /etc/gpm.conf) while -setting X to the original mouse protocol in /etc/X11/XF86Config -or /etc/X11/XF86Config-4. - - - -This approach to use gpm even in X has advantages when the mouse is -unplugged inadvertently. Simply restarting gpm with - -user@debian:# /etc/init.d/gpm restart - -will re-connect the mouse in software without restarting X. - - - -If gpm is disabled or not installed with some reason, make sure to set X to -read directly from the mouse device such as /dev/psaux. For details, refer -to the 3-Button Mouse mini-Howto at -/usr/share/doc/HOWTO/en-txt/mini/3-Button-Mouse.gz, -man gpm, -/usr/share/doc/gpm/FAQ.gz, and -README.mouse. - - - -For PowerPC, in /etc/X11/XF86Config or -/etc/X11/XF86Config-4, set the mouse device to -"/dev/input/mice". - - - -Modern kernels give you the capability to emulate a three-button mouse -when your mouse only has one button. Just add the following lines to -/etc/sysctl.conf file. - - - -# 3-button mouse emulation -# turn on emulation -/dev/mac_hid/mouse_button_emulation = 1 -# Send middle mouse button signal with the F11 key -/dev/mac_hid/mouse_button2_keycode = 87 -# Send right mouse button signal with the F12 key -/dev/mac_hid/mouse_button3_keycode = 88 -# For different keys, use showkey to tell you what the code is. - - - - - - - - Disk Space Needed for Tasks - - -The base sarge installation for i386, including all standard packages, -requires 178MB of disk space. - - - -The following table lists sizes reported by aptitude for the tasks listed in -tasksel. Note that some tasks have overlapping constituents, so the total -installed size for two tasks together may be less than the total obtained by -adding the numbers up. - - - - -Task Installed Download Space Needed - Size (MB) Size (MB) To Install (MB) - -Desktop 1537 521 2058 -Web server 71 21 92 -Print server 240 83 323 -Mail server 41 12 53 -File server 85 34 119 -SQL database 108 33 141 - - - - diff --git a/da/appendix/gpl.xml b/da/appendix/gpl.xml deleted file mode 100644 index 66dc64386..000000000 --- a/da/appendix/gpl.xml +++ /dev/null @@ -1,513 +0,0 @@ - - - -GNU General Public License - - - -Version 2, June 1991 - - - -Copyright (C) 1989, 1991 Free Software Foundation, Inc. -— -59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - - -Everyone is permitted to copy and distribute verbatim copies -of this license document, but changing it is not allowed. - - - - Preamble - - -The licenses for most software are designed to take away your freedom -to share and change it. By contrast, the gnu General Public License -is intended to guarantee your freedom to share and change free -software - to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit -to using it. (Some other Free Software Foundation software is covered -by the gnu Library General Public License instead.) You can apply it -to your programs, too. - - - -When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge -for this service if you wish), that you receive source code or can -get it if you want it, that you can change the software or use pieces -of it in new free programs; and that you know you can do these -things. - - - -To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the -rights. These restrictions translate to certain responsibilities for -you if you distribute copies of the software, or if you modify it. - - - -For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - - -We protect your rights with two steps: (1) copyright the software, -and (2) offer you this license which gives you legal permission to -copy, distribute and/or modify the software. - - - -Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, -we want its recipients to know that what they have is not the -original, so that any problems introduced by others will not reflect -on the original authors' reputations. - - - -Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making -the program proprietary. To prevent this, we have made it clear that -any patent must be licensed for everyone's free use or not licensed -at all. - - - -The precise terms and conditions for copying, distribution and -modification follow. - - - - - GNU GENERAL PUBLIC LICENSE - - -TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - - - - -This License applies to any program or other work which contains a -notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - - - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the -Program is covered only if its contents constitute a work based on -the Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - - - -You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any -warranty; and give any other recipients of the Program a copy of this -License along with the Program. - - - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a -fee. - - - - -You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - - -a) You must cause the modified files to carry prominent notices -stating that you changed the files and the date of any change. - - - -b) You must cause any work that you distribute or publish, that in -whole or in part contains or is derived from the Program or any part -thereof, to be licensed as a whole at no charge to all third parties -under the terms of this License. - - - -c) If the modified program normally reads commands interactively when -run, you must cause it, when started running for such interactive use -in the most ordinary way, to print or display an announcement -including an appropriate copyright notice and a notice that there is -no warranty (or else, saying that you provide a warranty) and that -users may redistribute the program under these conditions, and -telling the user how to view a copy of this License. (Exception: if -the Program itself is interactive but does not normally print such an -announcement, your work based on the Program is not required to print -an announcement.) - - - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote -it. - - - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - - - -In addition, mere aggregation of another work not based on the -Program with the Program (or with a work based on the Program) on a -volume of a storage or distribution medium does not bring the other -work under the scope of this License. - - - - -You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the -following: - - - -a) Accompany it with the complete corresponding machine-readable -source code, which must be distributed under the terms of Sections 1 -and 2 above on a medium customarily used for software interchange; -or, - - - -b) Accompany it with a written offer, valid for at least three years, -to give any third party, for a charge no more than your cost of -physically performing source distribution, a complete -machine-readable copy of the corresponding source code, to be -distributed under the terms of Sections 1 and 2 above on a medium -customarily used for software interchange; or, - - - -c) Accompany it with the information you received as to the offer to -distribute corresponding source code. (This alternative is allowed -only for noncommercial distribution and only if you received the -program in object code or executable form with such an offer, in -accord with Subsection b above.) - - - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - - - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - - - -You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this -License. However, parties who have received copies, or rights, from -you under this License will not have their licenses terminated so -long as such parties remain in full compliance. - - - - -You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - - - -Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject -to these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted -herein. You are not responsible for enforcing compliance by third -parties to this License. - - - - -If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do -not excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under -this License and any other pertinent obligations, then as a -consequence you may not distribute the Program at all. For example, -if a patent license would not permit royalty-free redistribution of -the Program by all those who receive copies directly or indirectly -through you, then the only way you could satisfy both it and this -License would be to refrain entirely from distribution of the -Program. - - - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended -to apply and the section as a whole is intended to apply in other -circumstances. - - - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is -willing to distribute software through any other system and a -licensee cannot impose that choice. - - - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - - - -If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - - - -The Free Software Foundation may publish revised and/or new -versions of the General Public License from time to time. Such new -versions will be similar in spirit to the present version, but may -differ in detail to address new problems or concerns. Each version is -given a distinguishing version number. If the Program specifies a -version number of this License which applies to it and "any later -version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number -of this License, you may choose any version ever published by the -Free Software Foundation. - - - - -If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the -author to ask for permission. For software which is copyrighted by -the Free Software Foundation, write to the Free Software Foundation; -we sometimes make exceptions for this. Our decision will be guided by -the two goals of preserving the free status of all derivatives of our -free software and of promoting the sharing and reuse of software -generally. - - - -NO WARRANTY - - - - -because the program is licensed free of charge, there is no -warranty for the program, to the extent permitted by applicable law. -except when otherwise stated in writing the copyright holders and/or -other parties provide the program "as is" without warranty of any -kind, either expressed or implied, including, but not limited to, the -implied warranties of merchantability and fitness for a particular -purpose. the entire risk as to the quality and performance of the -program is with you. should the program prove defective, you assume -the cost of all necessary servicing, repair or correction. - - - - -in no event unless required by applicable law or agreed to in -writing will any copyright holder, or any other party who may modify -and/or redistribute the program as permitted above, be liable to you -for damages, including any general, special, incidental or -consequential damages arising out of the use or inability to use the -program (including but not limited to loss of data or data being -rendered inaccurate or losses sustained by you or third parties or a -failure of the program to operate with any other programs), even if -such holder or other party has been advised of the possibility of -such damages. - - - - - -END OF TERMS AND CONDITIONS - - - - - How to Apply These Terms to Your New Programs - - -If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make -it free software which everyone can redistribute and change under -these terms. - - - -To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - -one line to give the program's name and a brief idea of what it -does. - - - -Copyright (C) year name of author - - - -This program is free software; you can redistribute it and/or modify -it under the terms of the gnu General Public License as published by -the Free Software Foundation; either version 2 of the License, or (at -your option) any later version. - - - -This program is distributed in the hope that it will be useful, but -without any warranty; without even the implied warranty of -merchantability or fitness for a particular purpose. See the gnu -General Public License for more details. - - - -You should have received a copy of the gnu General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -USA. - - - -Also add information on how to contact you by electronic and paper -mail. - - - -If the program is interactive, make it output a short notice like -this when it starts in an interactive mode: - - - -Gnomovision version 69, Copyright (C) year name of author - - - -Gnomovision comes with absolutely no warranty; for details type `show -w'. - - - -This is free software, and you are welcome to redistribute it under -certain conditions; type `show c' for details. - - - -The hypothetical commands `show w' and `show c' should show the -appropriate parts of the General Public License. Of course, the -commands you use may be called something other than `show w' and -`show c'; they could even be mouse-clicks or menu items - whatever -suits your program. - - - -You should also get your employer (if you work as a programmer) or -your school, if any, to sign a "copyright disclaimer" for the -program, if necessary. Here is a sample; alter the names: - - - -Yoyodyne, Inc., hereby disclaims all copyright interest in the -program `Gnomovision' (which makes passes at compilers) written by -James Hacker. - - - -signature of Ty Coon, 1 April 1989 - - - -Ty Coon, President of Vice - - - -This General Public License does not permit incorporating your -program into proprietary programs. If your program is a subroutine -library, you may consider it more useful to permit linking -proprietary applications with the library. If this is what you want -to do, use the gnu Library General Public License instead of this -License. - - - - diff --git a/da/appendix/random-bits.xml b/da/appendix/random-bits.xml deleted file mode 100644 index 5dc521dc9..000000000 --- a/da/appendix/random-bits.xml +++ /dev/null @@ -1,10 +0,0 @@ - - - -Random Bits - -&example-preseed.xml; -&files.xml; -&chroot-install.xml; - - -- cgit v1.2.3