path: root/po/da/preseed.po

# Danish translation of d-i-manual-preseed.
# Copyright (C) 2019 Free Software Foundation, Inc.
# Joe Hansen <joedalton2@yahoo.dk>, 2014, 2015, 2016, 2017, 2018, 2019.
#
# 32-bit processorer (er anvendt selv om 32-bit-processorer er den korrekte brug)
# cipher -> krypteringsalgoritme
# howto -> manual
# installer -> installationsprogram
# language -> sprog
# locale -> sted (lokalitet andet?)
# locales -> steder (sprogområder)
# preseeding -> forhåndskonfiguration
# scheme -> plan
# stateful -> tilstandebærende
# stateless -> tilstandsfri
# volume -> diskenhed
#
msgid ""
msgstr ""
"Project-Id-Version: d-i-manual_preseed\n"
"Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
"POT-Creation-Date: 2021-12-25 23:02+0000\n"
"PO-Revision-Date: 2021-06-07 19:32+0000\n"
"Last-Translator: scootergrisen <scootergrisen@gmail.com>\n"
"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-xml2pot; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.7-dev\n"

#. Tag: title
#: preseed.xml:16
#, no-c-format
msgid "Automating the installation using preseeding"
msgstr ""
"Automatisering af installationen med preseeding (forhåndskonfiguration)"

#. Tag: para
#: preseed.xml:18
#, no-c-format
msgid ""
"This appendix explains how to preseed answers to questions in &d-i; to "
"automate your installation."
msgstr ""
"Dette appendiks forklarer hvordan du forhåndskonfigurerer svar på spørgsmål "
"i &d-i;, så installationen bliver automatisk."

#. Tag: para
#: preseed.xml:23 preseed.xml:725
#, no-c-format
msgid ""
"The configuration fragments used in this appendix are also available as an "
"example preconfiguration file from &urlset-example-preseed;."
msgstr ""
"Konfigurationsfragmenterne brugt i dette appendiks er også tilgængelige som "
"et eksempel på en forhåndskonfigureret fil fra &urlset-example-preseed;."

#. Tag: title
#: preseed.xml:31
#, no-c-format
msgid "Introduction"
msgstr "Introduktion"

#. Tag: para
#: preseed.xml:32
#, no-c-format
msgid ""
"Preseeding provides a way to set answers to questions asked during the "
"installation process, without having to manually enter the answers while the "
"installation is running. This makes it possible to fully automate most types "
"of installation and even offers some features not available during normal "
"installations."
msgstr ""
"Forhåndskonfiguration tilbyder en måde at angive svar på spørgsmål, der "
"stilles under installationsprocessen, uden at skulle indtaste dem manuelt, "
"mens installationen er i gang. Dette gør det muligt at automatisere de "
"fleste typer af installationer og endda tilbyde nogle funktioner, som ikke "
"er tilgængelige under normale installationer."

#. Tag: para
#: preseed.xml:40
#, no-c-format
msgid ""
"Preseeding is not required. If you use an empty preseed file, the installer "
"will behave just the same way as in a normal manual installation. Each "
"question you preseed will (if you got it right!) modify the installation in "
"some way from that baseline."
msgstr ""
"Forhåndskonfiguration er ikke krævet. Hvis du bruger en tom fil til "
"forhåndskonfiguration, så vil installationsprogrammet opføre sig som under "
"en normal manuel installation. Hvert spørgsmål du angiver i "
"forhåndskonfigurationen vil (hvis du har gjort det korrekt) ændre "
"installationen på en eller anden måde."

#. Tag: title
#: preseed.xml:50
#, no-c-format
msgid "Preseeding methods"
msgstr "Metoder til forhåndskonfiguration"

#. Tag: para
#: preseed.xml:51
#, no-c-format
msgid ""
"There are three methods that can be used for preseeding: <firstterm>initrd</"
"firstterm>, <firstterm>file</firstterm> and <firstterm>network</firstterm>. "
"Initrd preseeding will work with any installation method and supports "
"preseeding of more things, but it requires the most preparation. File and "
"network preseeding each can be used with different installation methods."
msgstr ""
"Der er tre metoder, som kan bruges til forhåndskonfiguration: "
"<firstterm>initrd</firstterm>, <firstterm>file</firstterm> og "
"<firstterm>network</firstterm>. Initrd-forhåndskonfiguration vil fungere med "
"alle installationsmetoder og understøtte forhåndskonfiguration for mange "
"områder, men den kræver mest forberedelse. Fil- og "
"netværksforhåndskonfiguration kan bruges med forskellige "
"installationsmetoder."

#. Tag: para
#: preseed.xml:60
#, no-c-format
msgid ""
"The following table shows which preseeding methods can be used with which "
"installation methods."
msgstr ""
"Den følgende tabel viser hvilke metoder for forhåndskonfiguration, der kan "
"bruges med hvilke installationsmetoder."

#. Tag: entry
#: preseed.xml:69
#, no-c-format
msgid "Installation method"
msgstr "Installationsmetode"

#. Tag: entry
#: preseed.xml:69
#, no-c-format
msgid "initrd"
msgstr "initrd"

#. Tag: entry
#: preseed.xml:70 preseed.xml:531
#, no-c-format
msgid "file"
msgstr "fil"

#. Tag: entry
#: preseed.xml:70
#, no-c-format
msgid "network"
msgstr "netværk"

#. Tag: entry
#: preseed.xml:76
#, fuzzy, no-c-format
#| msgid "CD/DVD"
msgid "CD/DVD/USB"
msgstr "Cd/dvd"

#. Tag: entry
#: preseed.xml:77 preseed.xml:78 preseed.xml:79 preseed.xml:89 preseed.xml:91
#: preseed.xml:94 preseed.xml:95 preseed.xml:99 preseed.xml:101
#, no-c-format
msgid "<entry>yes</entry>"
msgstr "<entry>ja</entry>"

#. Tag: para
#: preseed.xml:81
#, no-c-format
msgid ""
"but only if you have network access, and set <literal>preseed/url</literal> "
"appropriately"
msgstr ""
"men kun hvis du har netværksadgang og angiver <literal>preseed/url</literal> "
"på passende vis"

#. Tag: entry
#: preseed.xml:88
#, no-c-format
msgid "netboot"
msgstr "netboot"

#. Tag: entry
#: preseed.xml:90 preseed.xml:100
#, no-c-format
msgid "<entry>no</entry>"
msgstr "<entry>nej</entry>"

#. Tag: entry
#: preseed.xml:93
#, no-c-format
msgid ""
"hd-media <phrase condition=\"bootable-usb\">(including usb-stick)</phrase>"
msgstr ""
"hd-media <phrase condition=\"bootable-usb\">(inklusive usb-drev)</phrase>"

#. Tag: entry
#: preseed.xml:96
#, no-c-format
msgid "yes<footnoteref linkend=\"apx-ps-net\"/>"
msgstr "ja<footnoteref linkend=\"apx-ps-net\"/>"

#. Tag: entry
#: preseed.xml:98
#, no-c-format
msgid "generic"
msgstr "generisk"

#. Tag: para
#: preseed.xml:107
#, fuzzy, no-c-format
#| msgid ""
#| "An important difference between the preseeding methods is the point at "
#| "which the preconfiguration file is loaded and processed. For initrd "
#| "preseeding this is right at the start of the installation, before the "
#| "first question is even asked. Preseeding from the kernel command line "
#| "happens just after. It is thus possible to override configuration set in "
#| "the initrd by editing the kernel command line (either in the bootloader "
#| "configuration or manually at boot time for bootloaders that allow it). "
#| "For file preseeding this is after the CD or CD image has been loaded. For "
#| "network preseeding it is only after the network has been configured."
msgid ""
"An important difference between the preseeding methods is the point at which "
"the preconfiguration file is loaded and processed. For initrd preseeding "
"this is right at the start of the installation, before the first question is "
"even asked. Preseeding from the kernel command line happens just after. It "
"is thus possible to override configuration set in the initrd by editing the "
"kernel command line (either in the bootloader configuration or manually at "
"boot time for bootloaders that allow it). For file preseeding this is after "
"the installation image has been loaded. For network preseeding it is only "
"after the network has been configured."
msgstr ""
"En vigtig forskel mellem metoderne til forhåndskonfiguration er punktet hvor "
"filen til forhåndskonfiguration indlæses og behandles. For initrd-"
"forhåndskonfiguration er dette lige ved starten af installationen, før det "
"første spørgsmål. Forhåndskonfiguration fra kernekommandolinjen sker lige "
"fter. Det er derfor muligt at overskrive konfiguration angivet i initrd ved "
"at redigere kernekommandolinjen (enten i opstartsindlæserens konfiguration "
"eller manuelt på opstartstidspunktet for opstartsindlæsere som tillader "
"dette). For filforhåndskonfiguration er dette efter cd- eller cd-aftrykket "
"er blevet indlæst. For netværksforhåndskonfiguration er det lige efter at "
"netværket er blevet konfigureret."

#. Tag: para
#: preseed.xml:119
#, no-c-format
msgid ""
"Obviously, any questions that have been processed before the "
"preconfiguration file is loaded cannot be preseeded (this will include "
"questions that are only displayed at medium or low priority, like the first "
"hardware detection run). A not so convenient way to avoid these questions "
"from being asked is to preseed them through the boot parameters, as "
"described in <xref linkend=\"preseed-bootparms\"/>."
msgstr ""

#. Tag: para
#: preseed.xml:128
#, no-c-format
msgid ""
"In order to easily avoid the questions that would normally appear before the "
"preseeding occurs, you can start the installer in <quote>auto</quote> mode. "
"This delays questions that would normally be asked too early for preseeding "
"(i.e. language, country and keyboard selection) until after the network "
"comes up, thus allowing them to be preseeded. It also runs the installation "
"at critical priority, which avoids many unimportant questions. See <xref "
"linkend=\"preseed-auto\"/> for details."
msgstr ""
"For nemt at undgå spørgsmålene som normalt ville fremkomme før "
"forhåndskonfigurationen udføres, så kan du starte installationsprogrammet i "
"<quote>auto</quote> tilstand. Dette forsinker spørgsmål, som normalt ville "
"blive stillet for forhåndskonfiguration (f.eks. sprog, land og tastaturvalg) "
"indtil efter netværket er oppe og køre, så de kan forhåndskonfigureres. "
"Tilstanden afvikler også installationen som en kritisk prioritet, hvilket "
"undgår mange uvigtige spørgsmål. Se <xref linkend=\"preseed-auto\"/> for "
"detaljer."

#. Tag: title
#: preseed.xml:142
#, no-c-format
msgid "Limitations"
msgstr "Begrænsninger"

#. Tag: para
#: preseed.xml:143
#, no-c-format
msgid ""
"Although most questions used by &d-i; can be preseeded using this method, "
"there are some notable exceptions. You must (re)partition an entire disk or "
"use available free space on a disk; it is not possible to use existing "
"partitions."
msgstr ""

#. Tag: title
#: preseed.xml:217
#, no-c-format
msgid "Using preseeding"
msgstr "Brug af forhåndskonfiguration"

#. Tag: para
#: preseed.xml:218
#, no-c-format
msgid ""
"You will first need to create a preconfiguration file and place it in the "
"location from where you want to use it. Creating the preconfiguration file "
"is covered later in this appendix. Putting it in the correct location is "
"fairly straightforward for network preseeding or if you want to read the "
"file off a usb-stick. If you want to include the file in an installation ISO "
"image, you will have to remaster the image. How to get the preconfiguration "
"file included in the initrd is outside the scope of this document; please "
"consult the developers' documentation for &d-i;."
msgstr ""

#. Tag: para
#: preseed.xml:229
#, no-c-format
msgid ""
"An example preconfiguration file that you can use as basis for your own "
"preconfiguration file is available from &urlset-example-preseed;. This file "
"is based on the configuration fragments included in this appendix."
msgstr ""

#. Tag: title
#: preseed.xml:238
#, no-c-format
msgid "Loading the preconfiguration file"
msgstr "Indlæsning af filen til forhåndskonfiguration"

#. Tag: para
#: preseed.xml:239
#, no-c-format
msgid ""
"If you are using initrd preseeding, you only have to make sure a file named "
"<filename>preseed.cfg</filename> is included in the root directory of the "
"initrd. The installer will automatically check if this file is present and "
"load it."
msgstr ""

#. Tag: para
#: preseed.xml:246
#, no-c-format
msgid ""
"For the other preseeding methods you need to tell the installer what file to "
"use when you boot it. This is normally done by passing the kernel a boot "
"parameter, either manually at boot time or by editing the bootloader "
"configuration file <phrase arch=\"linux-any\">(e.g. <filename>syslinux.cfg</"
"filename>) and adding the parameter to the end of the append line(s) for the "
"kernel.</phrase><phrase arch=\"kfreebsd-any\">(e.g. <filename>grub.cfg</"
"filename>) and adding the parameter as a new <literal>set</literal> line for "
"the kernel.</phrase><phrase arch=\"hurd-any\">(e.g. <filename>grub.cfg</"
"filename>) and adding the parameter to the end of the <filename>gnumach.gz</"
"filename> line.</phrase>"
msgstr ""

#. Tag: para
#: preseed.xml:259
#, no-c-format
msgid ""
"If you do specify the preconfiguration file in the bootloader configuration, "
"you might change the configuration so you don't need to hit enter to boot "
"the installer. <phrase arch=\"linux-any\">For syslinux this means setting "
"the timeout to <literal>1</literal> in <filename>syslinux.cfg</filename>.</"
"phrase><phrase arch=\"kfrebsd-any;hurd-any\">For grub this means setting the "
"timeout to <literal>0</literal> in <filename>grub.cfg</filename>.</phrase>"
msgstr ""

#. Tag: para
#: preseed.xml:268
#, no-c-format
msgid ""
"To make sure the installer gets the right preconfiguration file, you can "
"optionally specify a checksum for the file. Currently this needs to be a "
"md5sum, and if specified it must match the preconfiguration file or the "
"installer will refuse to use it."
msgstr ""

#. Tag: screen
#: preseed.xml:277
#, fuzzy, no-c-format
#| msgid ""
#| "Boot parameters to specify:\n"
#| "- if you're netbooting:\n"
#| "  preseed/url=http://host/path/to/preseed.cfg\n"
#| "  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
#| "- or\n"
#| "  preseed/url=tftp://host/path/to/preseed.cfg\n"
#| "  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
#| "\n"
#| "- if you're booting a remastered CD:\n"
#| "  preseed/file=/cdrom/preseed.cfg\n"
#| "  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
#| "\n"
#| "- if you're installing from USB media (put the preconfiguration file in "
#| "the\n"
#| "  toplevel directory of the USB stick):\n"
#| "  preseed/file=/hd-media/preseed.cfg\n"
#| "  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d"
msgid ""
"Boot parameters to specify:\n"
"- if you're netbooting:\n"
"  preseed/url=http://host/path/to/preseed.cfg\n"
"  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
"- or\n"
"  preseed/url=tftp://host/path/to/preseed.cfg\n"
"  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
"\n"
"- if you're booting a remastered installation image:\n"
"  preseed/file=/cdrom/preseed.cfg\n"
"  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
"\n"
"- if you're installing from USB media (put the preconfiguration file in the\n"
"  toplevel directory of the USB stick):\n"
"  preseed/file=/hd-media/preseed.cfg\n"
"  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d"
msgstr ""
"Opstartsparametre at angive:\n"
"- hvis du bruger opstart for nettet:\n"
"  preseed/url=http://host/path/to/preseed.cfg\n"
"  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
"- or\n"
"  preseed/url=tftp://host/path/to/preseed.cfg\n"
"  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
"\n"
"- hvis du starter op fra en remastered cd:\n"
"  preseed/file=/cdrom/preseed.cfg\n"
"  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
"\n"
"- hvis du installerer fra USB-medie (placer prækonfigurationsfilen i\n"
"  den øverste mappe af USB-drevet):\n"
"  preseed/file=/hd-media/preseed.cfg\n"
"  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d"

#. Tag: para
#: preseed.xml:279
#, no-c-format
msgid ""
"Note that <filename>preseed/url</filename> can be shortened to just "
"<filename>url</filename>, <filename>preseed/file</filename> to just "
"<filename>file</filename> and <filename>preseed/file/checksum</filename> to "
"just <filename>preseed-md5</filename> when they are passed as boot "
"parameters."
msgstr ""
"Bemærk at <filename>preseed/url</filename> kan forkortes til bare "
"<filename>url</filename>, <filename>preseed/file</filename> til bare "
"<filename>file</filename> og <filename>preseed/file/checksum</filename> til "
"bare <filename>preseed-md5</filename>, når de sendes som opstartsparametre."

#. Tag: title
#: preseed.xml:290
#, no-c-format
msgid "Using boot parameters to preseed questions"
msgstr "Brug af opstartsparametre til at forhåndskonfigurere spørgsmål"

#. Tag: para
#: preseed.xml:291
#, no-c-format
msgid ""
"If a preconfiguration file cannot be used to preseed some steps, the install "
"can still be fully automated, since you can pass preseed values on the "
"command line when booting the installer."
msgstr ""
"Hvis en forhåndskonfigurationsfil ikke kan bruges til at forhåndskonfigurere "
"nogle trin, så kan installationen stadig automatiseres, da du kan sende "
"forhåndskonfigurerede værdier på kommandolinjen når installationsprogrammet "
"startes op."

#. Tag: para
#: preseed.xml:297
#, no-c-format
msgid ""
"Boot parameters can also be used if you do not really want to use "
"preseeding, but just want to provide an answer for a specific question. Some "
"examples where this can be useful are documented elsewhere in this manual."
msgstr ""
"Opstartsparametere kan også bruges hvis du ikke reelt ønsker at bruge "
"forhåndskonfiguration, men bare ønsker at tilbyder et svar på et specifikt "
"spørgsmål. Nogle eksempler hvor dette kan være nyttigt er dokumenteret et "
"andet sted i denne manual."

#. Tag: para
#: preseed.xml:303
#, no-c-format
msgid ""
"To set a value to be used inside &d-i;, just pass "
"<userinput><replaceable>path/to/variable</replaceable>=<replaceable>value</"
"replaceable></userinput> for any of the preseed variables listed in the "
"examples in this appendix. If a value is to be used to configure packages "
"for the target system, you will need to prepend the <firstterm>owner</"
"firstterm><footnote> <para> The owner of a debconf variable (or template) is "
"normally the name of the package that contains the corresponding debconf "
"template. For variables used in the installer itself the owner is <quote>d-"
"i</quote>. Templates and variables can have more than one owner which helps "
"to determine whether they can be removed from the debconf database if the "
"package is purged. </para> </footnote> of the variable as in "
"<userinput><replaceable>owner</replaceable>:<replaceable>path/to/variable</"
"replaceable>=<replaceable>value</replaceable></userinput>. If you don't "
"specify the owner, the value for the variable will not be copied to the "
"debconf database in the target system and thus remain unused during the "
"configuration of the relevant package."
msgstr ""
"For at angive en værdi til brug inden i &d-i;, så send bare "
"<userinput><replaceable>sti/til/variabel</replaceable>=<replaceable>værdi</"
"replaceable></userinput> for enhver af variablerne vist i eksemplet i dette "
"appendiks. hvis en værdi skal bruges til at konfigure pakker for "
"målsystemet, så skal du foranstille <firstterm>ejeren</firstterm><footnote> "
"<para> Ejeren af en debconf-variabel (eller skabelon) er normalt navnet på "
"pakken, der indeholder den tilsvarende debconf-skabelon. For variabler brugt "
"i selve installationsprogrammet er ejeren <quote>d-i</quote>. Skabeloner og "
"variabler kan have mere end en ejer, hvilket hjælper med at bestemme om de "
"kan fjernes fra debconf-databasen, hvis pakken fjernes. </para> </footnote> "
"af variablen som i <userinput><replaceable>ejer</replaceable>:"
"<replaceable>sti/til/variabel</replaceable>=<replaceable>værdi</"
"replaceable></userinput>. Hvis du ikke angiver ejeren, vil værdien for "
"variablen ikke blive kopieret til debconf-databasen i målsystemet og "
"forbliver dermed ubrugt under konfiguration af den relevante pakke."

#. Tag: para
#: preseed.xml:326
#, no-c-format
msgid ""
"Normally, preseeding a question in this way will mean that the question will "
"not be asked. To set a specific default value for a question, but still have "
"the question asked, use <quote>?=</quote> instead of <quote>=</quote> as "
"operator. See also <xref linkend=\"preseed-seenflag\"/>."
msgstr ""
"Normalt vil forhåndskonfiguration af et spørgsmål på den måde betyde, at "
"spørgsmålet ikke vil blive stillet. For at angive en specifik standardværdi "
"for et spørgsmål, men stadig få spørgsmålet, så brug <quote>?=</quote> i "
"stedet for <quote>=</quote> som operatør. Se også <xref linkend=\"preseed-"
"seenflag\"/>."

#. Tag: para
#: preseed.xml:333
#, no-c-format
msgid ""
"Note that some variables that are frequently set at the boot prompt have a "
"shorter alias. If an alias is available, it is used in the examples in this "
"appendix instead of the full variable. The <literal>preseed/url</literal> "
"variable for example has been aliased as <literal>url</literal>. Another "
"example is the <literal>tasks</literal> alias, which translates to "
"<literal>tasksel:tasksel/first</literal>."
msgstr ""
"Bemærk at nogle variabler som ofte angives ved opstartsprompten har et "
"kortere alias. Hvis et alias er tilgængelig, så bruges det i eksemplerne i "
"dette appendiks i stedet for den fulde variabel. Variablen <literal>preseed/"
"url</literal> har for eksempel et alias som <literal>url</literal>. Et andet "
"eksempel er aliasset <literal>tasks</literal>, som oversættes til "
"<literal>tasksel:tasksel/first</literal>."

#. Tag: para
#: preseed.xml:342
#, no-c-format
msgid ""
"A <quote>---</quote> in the boot options has special meaning. Kernel "
"parameters that appear after the last <quote>---</quote> may be copied into "
"the bootloader configuration for the installed system (if supported by the "
"installer for the bootloader). The installer will automatically filter out "
"any options (like preconfiguration options) that it recognizes."
msgstr ""
"Et <quote>---</quote> i opstartstilvalget har speciel betydning. "
"Kerneparametre som fremgår efter det sidste <quote>---</quote> kan kopieres "
"til opstartsindlæserens konfiguration for det installerede system (hvis "
"understøttet af installationsprogrammet for opstartsindlæseren). "
"Installationsprogrammet vil automatisk filtrere tilvalg væk (såsom "
"forhåndskonfigurerede tilvalg), som den genkender."

#. Tag: para
#: preseed.xml:351
#, no-c-format
msgid ""
"Current linux kernels (2.6.9 and later) accept a maximum of 32 command line "
"options and 32 environment options, including any options added by default "
"for the installer. If these numbers are exceeded, the kernel will panic "
"(crash). (For earlier kernels, these numbers were lower.)"
msgstr ""
"Nuværnede Linuxkerner (2.6.9 og senere) accepterer et maksimum på 32 "
"kommandolinjetilvalg og 32 miljøtilvalg, inklusive eventuelle tilvalg "
"tilføjet som standard for installationsprogrammet. Hvis der anvendes højere "
"antal, vil kernen gå i panik (nedbrud). (For tidligere kerner er disse antal "
"lavere.)"

#. Tag: para
#: preseed.xml:359
#, no-c-format
msgid ""
"For most installations some of the default options in your bootloader "
"configuration file, like <literal>vga=normal</literal>, may be safely "
"removed which may allow you to add more options for preseeding."
msgstr ""
"For de fleste installationer kan nogle af standardtilvalgene i "
"opstartsindlæserens konfigurationsfil, såsom <literal>vga=normal</literal>, "
"fjernes uden problemer, hvilket giver mulighed for at tilføje flere tilvalg "
"for forhåndskonfigurationen."

#. Tag: para
#: preseed.xml:366
#, no-c-format
msgid ""
"It may not always be possible to specify values with spaces for boot "
"parameters, even if you delimit them with quotes."
msgstr ""
"Det er ikke altid muligt at specificere værdier med mellemrum for "
"opstartsparametre, selv ikke hvis du afgrænser dem med citationstegn."

#. Tag: title
#: preseed.xml:375
#, no-c-format
msgid "Auto mode"
msgstr "Auto-tilstand"

#. Tag: para
#: preseed.xml:376
#, no-c-format
msgid ""
"There are several features of &debian; Installer that combine to allow "
"fairly simple command lines at the boot prompt to result in arbitrarily "
"complex customized automatic installs."
msgstr ""
"Der er flere funktioner i &debian;-installationsprogrammet, som kombineret "
"medfører at ret så simple kommandolinjer på opstartsprompten medfører "
"arbitrære og komplekse tilpassede automatiske installationer."

#. Tag: para
#: preseed.xml:382
#, no-c-format
msgid ""
"This is enabled by using the <literal>Automated install</literal> boot "
"choice, also called <literal>auto</literal> for some architectures or boot "
"methods. In this section, <literal>auto</literal> is thus not a parameter, "
"it means selecting that boot choice, and appending the following boot "
"parameters on the boot prompt. <phrase arch=\"x86\">See <xref linkend=\"boot-"
"screen\"/> for information on how to add a boot parameter.</phrase>"
msgstr ""
"Dette aktiveres ved at bruge opstartsvalget <literal>Automatiseret "
"installation</literal>, også kaldt <literal>auto</literal> for nogle "
"arkitekturer eller opstartsmetoder. I dette afsnit, er <literal>auto</"
"literal> derfor ikke en parameter, det betyder valg af opstartindstillingen, "
"og tilføjelse af den efterfølgende opstartsparameter på opstartsprompten. "
"<phrase arch=\"x86\">Se <xref linkend=\"boot-screen\"/> for information om "
"hvordan en opstartsparameter tilføjes.</phrase>"

#. Tag: para
#: preseed.xml:391
#, no-c-format
msgid ""
"To illustrate this, here are some examples that can be used at the boot "
"prompt: <informalexample><screen>\n"
"auto url=autoserver\n"
"</screen></informalexample> This relies on there being a DHCP server that "
"will get the machine to the point where <literal>autoserver</literal> can be "
"resolved by DNS, perhaps after adding the local domain if that was provided "
"by DHCP. If this was done at a site where the domain is <literal>example."
"com</literal>, and they have a reasonably sane DHCP setup, it would result "
"in the preseed file being retrieved from <literal>http://autoserver.example."
"com/d-i/&releasename;/./preseed.cfg</literal>."
msgstr ""
"For at illustrere dette er her nogle eksempler, som kan bruges ved "
"opstartsprompten: <informalexample><screen>\n"
"auto url=autoserver\n"
"</screen></informalexample> Dette afhænger af, at der er en DHCP-server, som "
"vil få maskinen til det punkt hvor <literal>autoserver</literal> kan slås op "
"via DNS, måske efter tilføjelse af det lokale domæne, hvis det blev angivet "
"af DHCP. Hvis dette blev gjort et sted hvor domænet er <literal>eksempel."
"com</literal>, og de har en fornuftig DHCP-opsætning, vil det medføre at "
"filen med forhåndskonfigurationen hentes fra <literal>http://autoserver."
"eksempel.com/d-i/&releasename;/./preseed.cfg</literal>."

#. Tag: para
#: preseed.xml:405
#, no-c-format
msgid ""
"The last part of that url (<literal>d-i/&releasename;/./preseed.cfg</"
"literal>) is taken from <literal>auto-install/defaultroot</literal>. By "
"default this includes the directory <literal>&releasename;</literal> to "
"allow future versions to specify their own codename and let people migrate "
"forwards in a controlled manner. The <literal>/./</literal> bit is used to "
"indicate a root, relative to which subsequent paths can be anchored (for use "
"in preseed/include and preseed/run). This allows files to be specified "
"either as full URLs, paths starting with / that are thus anchored, or even "
"paths relative to the location where the last preseed file was found. This "
"can be used to construct more portable scripts where an entire hierarchy of "
"scripts can be moved to a new location without breaking it, for example "
"copying the files onto a USB stick when they started out on a web server. In "
"this example, if the preseed file sets <literal>preseed/run</literal> to "
"<literal>/scripts/late_command.sh</literal> then the file will be fetched "
"from <literal>http://autoserver.example.com/d-i/&releasename;/./scripts/"
"late_command.sh</literal>."
msgstr ""
"Den sidste del af den adresse (<literal>d-i/&releasename;/./preseed.cfg</"
"literal>) tages fra <literal>auto-install/defaultroot</literal>. Som "
"standard inkluderer dette at mappen <literal>&releasename;</literal> "
"tillader fremtidige versioner at angive deres eget kodenavn og lade folk "
"migrere videre på en kontrolleret måde. Delen <literal>/./</literal> bruges "
"til at indikere en rod, relativ til hvilke efterfølgende stier kan forankres "
"(for brug i preseed/include og pressed/run). Dette gør det det muligt at "
"filer angives enten som fulde adresser, stier startende med / som dermed "
"forankres eller endda stier relative til stedet hvor den sidste fil til "
"forhåndskonfiguration blev fundet. Dette kan bruges til at konstruere mere "
"flytbare skripter, hvor et helt hierarki af skripter kan flyttes til en ny "
"placering uden at blive ødelagt, for eksempel kopiere filerne ned på et USB-"
"drev, når de startede på en internetserver. I dette eksempel, hvis filen til "
"forhåndskonfiguration indstiller <literal>preseed/run</literal> til "
"<literal>/scripts/late_command.sh</literal> så vil filen blive hentet fra "
"<literal>http://autoserver.eksempel.com/d-i/&releasename;/./scripts/"
"late_command.sh</literal>."

#. Tag: para
#: preseed.xml:425
#, no-c-format
msgid ""
"If there is no local DHCP or DNS infrastructure, or if you do not want to "
"use the default path to <filename>preseed.cfg</filename>, you can still use "
"an explicit url, and if you don't use the <literal>/./</literal> element it "
"will be anchored to the start of the path (i.e. the third <literal>/</"
"literal> in the URL). Here is an example that requires minimal support from "
"the local network infrastructure: <informalexample><screen>\n"
"auto url=<replaceable>http://192.168.1.2/path/to/mypreseed.file</"
"replaceable>\n"
"</screen></informalexample> The way this works is that:"
msgstr ""
"Hvis der ingen lokal DHCP- eller DNS-infrastruktur er, eller hvis du ikke "
"ønsker at bruge standardstien til <filename>preseed.cfg</filename>, så kan "
"du stadig bruge en eksplicit adresse, og hvis du ikke bruger <literal>/./</"
"literal>-elementet, så vil det blive forankret til begyndelsen af stien "
"(dvs. den tredje <literal>/</literal> i adressen). Her er et eksempel, der "
"kræver minimal understøttelse fra den lokale netværksinfrastruktur: "
"<informalexample><screen>\n"
"auto url=<replaceable>http://192.168.1.2/path/to/mypreseed.file</"
"replaceable>\n"
"</screen></informalexample> Måden dette fungerer på er:"

#. Tag: para
#: preseed.xml:438
#, no-c-format
msgid "if the URL is missing a protocol, http is assumed,"
msgstr "hvis adressen mangler en protokol, så anvendes http,"

#. Tag: para
#: preseed.xml:441
#, no-c-format
msgid ""
"if the hostname section contains no periods, it has the domain derived from "
"DHCP appended to it, and"
msgstr ""
"hvis værtsnavnafsnittet ikke indeholder punktummer, så bliver domænet afledt "
"fra HDCP tilføjet til det, og"

#. Tag: para
#: preseed.xml:445
#, no-c-format
msgid ""
"if there's no <literal>/</literal>'s after the hostname, then the default "
"path is added."
msgstr ""
"hvis der ikke er nogle <literal>/</literal> efter værtsnavnet, så tilføjes "
"standardstien."

#. Tag: para
#: preseed.xml:451
#, no-c-format
msgid ""
"In addition to specifying the url, you can also specify settings that do not "
"directly affect the behavior of &d-i; itself, but can be passed through to "
"scripts specified using <literal>preseed/run</literal> in the loaded preseed "
"file. At present, the only example of this is <literal>auto-install/classes</"
"literal>, which has an alias <literal>classes</literal>. This can be used "
"thus: <informalexample><screen>\n"
"auto url=<replaceable>example.com</replaceable> classes=<replaceable>class_A;"
"class_B</replaceable>\n"
"</screen></informalexample> The classes could for example denote the type of "
"system to be installed, or the localization to be used."
msgstr ""
"Udover at angive adressen, så kan du også angive indstillinger, som ikke har "
"en direkte påvirkning på opførelsen hos selve &d-i;, men som kan sendes "
"videre igennem til skripter angivet via <literal>preseed/run</literal> i den "
"indlæste fil til forhåndskonfiguration. I øjeblikket er det eneste eksempel "
"på dette <literal>auto-install/classes</literal>, der har et alias "
"<literal>classes</literal>. Dette kan bruges således: "
"<informalexample><screen>\n"
"auto url=<replaceable>example.com</replaceable> classes=<replaceable>class_A;"
"class_B</replaceable>\n"
"</screen></informalexample> Klasserne kan for eksempel betegne typen af "
"system til installation, eller oversættelsen."

#. Tag: para
#: preseed.xml:465
#, no-c-format
msgid ""
"It is of course possible to extend this concept, and if you do, it is "
"reasonable to use the auto-install namespace for this. So one might have "
"something like <literal>auto-install/style</literal> which is then used in "
"your scripts. If you feel the need to do this, please mention it on the "
"<email>debian-boot@lists.debian.org</email> mailing list so that we can "
"avoid namespace conflicts, and perhaps add an alias for the parameter for "
"you."
msgstr ""
"Det er selvfølgelig muligt at udvide dette koncept, og hvis du gør det, er "
"det fornuftigt at bruge det automatisk installerede navnerum til dette "
"formål. Så man kan have noget ala dette <literal>auto-install/style</"
"literal>, som så bruges i dine skripter. Hvis du har brug for dette, så nævn "
"det på postlisten <email>debian-boot@lists.debian.org</email>, så vi kan "
"undgå navnerumskonflikter, og måske tilføje et alias for parameteren for dig."

#. Tag: para
#: preseed.xml:475
#, no-c-format
msgid ""
"The <literal>auto</literal> boot choice is not yet defined on all arches. "
"The same effect may be achieved by simply adding the two parameters "
"<literal>auto=true priority=critical</literal> to the kernel command line. "
"The <literal>auto</literal> kernel parameter is an alias for <literal>auto-"
"install/enable</literal> and setting it to <literal>true</literal> delays "
"the locale and keyboard questions until after there has been a chance to "
"preseed them, while <literal>priority</literal> is an alias for "
"<literal>debconf/priority</literal> and setting it to <literal>critical</"
"literal> stops any questions with a lower priority from being asked."
msgstr ""
"Opstartsvalget <literal>auto</literal> er ikke defineret på alle "
"arkitekturer. Den samme effekt kan opnås ved at tilføje de to parametre "
"<literal>auto=true priority=critical</literal> til kernens kommandolinje. "
"Kerneparameteren <literal>auto</literal> er et alias for <literal>auto-"
"install/enable</literal> og angivelse af den til <literal>true</literal> "
"forsinker spørgsmålene om sprog og tastatur indtil efter, at der har været "
"en mulighed for at forhåndskonfigurere dem, mens <literal>priority</literal> "
"er et alias for <literal>debconf/priority</literal> og angivelse af den til "
"<literal>critical</literal> stopper alle spørgsmål med en lavere prioritet i "
"at blive stillet."

#. Tag: para
#: preseed.xml:489
#, no-c-format
msgid ""
"Additional options that may be of interest while attempting to automate an "
"install while using DHCP are: <literal>interface=auto netcfg/"
"dhcp_timeout=60</literal> which makes the machine choose the first viable "
"NIC and be more patient about getting a reply to its DHCP query."
msgstr ""
"Yderligere indstililnger som kan have interesse under forsøget på at "
"automatisere en installation mens DHCP anvendes: <literal>interface=auto "
"netcfg/dhcp_timeout=60</literal> som får maskinen til at vælge den første "
"levedygtige NIC og være tålmodig med at få et svar til dets DHCP-"
"forespørgsel."

#. Tag: para
#: preseed.xml:498
#, no-c-format
msgid ""
"An extensive example of how to use this framework, including example scripts "
"and classes, can be found on the <ulink url=\"http://hands.com/d-i/"
"\">website of its developer</ulink>. The examples available there also show "
"many other nice effects that can be achieved by creative use of "
"preconfiguration."
msgstr ""
"Et omfattende eksempel på hvordan denne ramme anvendes, inklusive "
"eksemplskripter og klasser, kan findes på <ulink url=\"http://hands.com/d-i/"
"\">hjemmesiden for udvikleren</ulink>. Eksemplerne der viser også mange "
"andre gode effekter, som kan opnås ved kreativ brug af forhåndskonfiguration."

#. Tag: title
#: preseed.xml:509
#, no-c-format
msgid "Aliases useful with preseeding"
msgstr "Aliassser nyttig under forhåndskonfiguration"

#. Tag: para
#: preseed.xml:510
#, no-c-format
msgid ""
"The following aliases can be useful when using (auto mode) preseeding. Note "
"that these are simply short aliases for question names, and you always need "
"to specify a value as well: for example, <literal>auto=true</literal> or "
"<literal>interface=eth0</literal>."
msgstr ""
"De følgende aliasser kan være nyttige når forhåndskonfiguration (auto-"
"tilstand) anvendes. Bemærk at dette er simple korte aliasser for "
"spørgsmålnavne, og at du altid også skal specificere en værdi: For eksempel, "
"<literal>auto=true</literal> eller <literal>interface=eth0</literal>."

#. Tag: entry
#: preseed.xml:523
#, no-c-format
msgid "priority"
msgstr "priority"

#. Tag: entry
#: preseed.xml:523
#, no-c-format
msgid "debconf/priority"
msgstr "debconf/priority"

#. Tag: entry
#: preseed.xml:524
#, no-c-format
msgid "<entry>fb</entry>"
msgstr "<entry>fb</entry>"

#. Tag: entry
#: preseed.xml:524
#, no-c-format
msgid "debian-installer/framebuffer"
msgstr "debian-installer/framebuffer"

#. Tag: entry
#: preseed.xml:525
#, no-c-format
msgid "language"
msgstr "language"

#. Tag: entry
#: preseed.xml:525
#, no-c-format
msgid "debian-installer/language"
msgstr "debian-installer/language"

#. Tag: entry
#: preseed.xml:526
#, no-c-format
msgid "country"
msgstr "country"

#. Tag: entry
#: preseed.xml:526
#, no-c-format
msgid "debian-installer/country"
msgstr "debian-installer/country"

#. Tag: entry
#: preseed.xml:527
#, no-c-format
msgid "locale"
msgstr "locale"

#. Tag: entry
#: preseed.xml:527
#, no-c-format
msgid "debian-installer/locale"
msgstr "debian-installer/locale"

#. Tag: entry
#: preseed.xml:528
#, no-c-format
msgid "theme"
msgstr "theme"

#. Tag: entry
#: preseed.xml:528
#, no-c-format
msgid "debian-installer/theme"
msgstr "debian-installer/theme"

#. Tag: entry
#: preseed.xml:529
#, no-c-format
msgid "auto"
msgstr "auto"

#. Tag: entry
#: preseed.xml:529
#, no-c-format
msgid "auto-install/enable"
msgstr "auto-install/enable"

#. Tag: entry
#: preseed.xml:530
#, no-c-format
msgid "classes"
msgstr "classes"

#. Tag: entry
#: preseed.xml:530
#, no-c-format
msgid "auto-install/classes"
msgstr "auto-install/classes"

#. Tag: entry
#: preseed.xml:531
#, no-c-format
msgid "preseed/file"
msgstr "preseed/file"

#. Tag: entry
#: preseed.xml:532
#, no-c-format
msgid "<entry>url</entry>"
msgstr "<entry>url</entry>"

#. Tag: entry
#: preseed.xml:532
#, no-c-format
msgid "preseed/url"
msgstr "preseed/url"

#. Tag: entry
#: preseed.xml:533
#, no-c-format
msgid "domain"
msgstr "domain"

#. Tag: entry
#: preseed.xml:533
#, no-c-format
msgid "netcfg/get_domain"
msgstr "netcfg/get_domain"

#. Tag: entry
#: preseed.xml:534
#, no-c-format
msgid "hostname&nbsp;&nbsp;&nbsp;"
msgstr "hostname&nbsp;&nbsp;&nbsp;"

#. Tag: entry
#: preseed.xml:534
#, no-c-format
msgid "netcfg/get_hostname"
msgstr "netcfg/get_hostname"

#. Tag: entry
#: preseed.xml:535
#, no-c-format
msgid "interface"
msgstr "interface"

#. Tag: entry
#: preseed.xml:535
#, no-c-format
msgid "netcfg/choose_interface"
msgstr "netcfg/choose_interface"

#. Tag: entry
#: preseed.xml:536
#, no-c-format
msgid "protocol"
msgstr "protocol"

#. Tag: entry
#: preseed.xml:536
#, no-c-format
msgid "mirror/protocol"
msgstr "mirror/protocol"

#. Tag: entry
#: preseed.xml:537
#, no-c-format
msgid "suite"
msgstr "suite"

#. Tag: entry
#: preseed.xml:537
#, no-c-format
msgid "mirror/suite"
msgstr "mirror/suite"

#. Tag: entry
#: preseed.xml:538
#, no-c-format
msgid "modules"
msgstr "modules"

#. Tag: entry
#: preseed.xml:538
#, no-c-format
msgid "anna/choose_modules"
msgstr "anna/choose_modules"

#. Tag: entry
#: preseed.xml:539
#, no-c-format
msgid "recommends"
msgstr "recommends"

#. Tag: entry
#: preseed.xml:539
#, no-c-format
msgid "base-installer/install-recommends"
msgstr "base-installer/install-recommends"

#. Tag: entry
#: preseed.xml:540
#, no-c-format
msgid "tasks"
msgstr "tasks"

#. Tag: entry
#: preseed.xml:540
#, no-c-format
msgid "tasksel:tasksel/first"
msgstr "tasksel:tasksel/first"

#. Tag: entry
#: preseed.xml:541
#, no-c-format
msgid "desktop"
msgstr "desktop"

#. Tag: entry
#: preseed.xml:541
#, no-c-format
msgid "tasksel:tasksel/desktop"
msgstr "tasksel:tasksel/desktop"

#. Tag: entry
#: preseed.xml:542
#, no-c-format
msgid "dmraid"
msgstr "dmraid"

#. Tag: entry
#: preseed.xml:542
#, no-c-format
msgid "disk-detect/dmraid/enable"
msgstr "disk-detect/dmraid/enable"

#. Tag: entry
#: preseed.xml:543
#, no-c-format
msgid "keymap"
msgstr "keymap"

#. Tag: entry
#: preseed.xml:543
#, no-c-format
msgid "keyboard-configuration/xkb-keymap"
msgstr "keyboard-configuration/xkb-keymap"

#. Tag: entry
#: preseed.xml:544
#, no-c-format
msgid "preseed-md5"
msgstr "preseed-md5"

#. Tag: entry
#: preseed.xml:544
#, no-c-format
msgid "preseed/file/checksum"
msgstr "preseed/file/checksum"

#. Tag: title
#: preseed.xml:551
#, no-c-format
msgid "Examples of boot prompt preseeding"
msgstr ""

#. Tag: para
#: preseed.xml:552
#, no-c-format
msgid ""
"Here are some examples of how the boot prompt might look like (you will need "
"to adapt this to your needs<phrase arch=\"x86\">; also see <xref linkend="
"\"boot-screen\"/></phrase>)."
msgstr ""

#. Tag: screen
#: preseed.xml:558
#, no-c-format
msgid ""
"# To set French as language and France as country:\n"
"/install.amd/vmlinuz vga=788 initrd=/install.amd/gtk/initrd.gz language=fr "
"country=FR --- quiet\n"
"# To set English as language and Germany as country, and use a German "
"keyboard layout:\n"
"/install.amd/vmlinuz vga=788 initrd=/install.amd/gtk/initrd.gz language=en "
"country=DE locale=en_US.UTF-8 keymap=de --- quiet\n"
"# To install the MATE desktop:\n"
"/install.amd/vmlinuz vga=788 initrd=/install.amd/gtk/initrd.gz desktop=mate-"
"desktop --- quiet\n"
"# To install the web-server task:\n"
"/install.amd/vmlinuz initrd=/install.amd/initrd.gz tasksel:tasksel/first=web-"
"server ---"
msgstr ""

#. Tag: title
#: preseed.xml:564
#, no-c-format
msgid "Using a DHCP server to specify preconfiguration files"
msgstr "Brug af en DHCP-server til at specificere forhåndskonfigurationsfiler"

#. Tag: para
#: preseed.xml:565
#, no-c-format
msgid ""
"It's also possible to use DHCP to specify a preconfiguration file to "
"download from the network. DHCP allows specifying a filename. Normally this "
"is a file to netboot, but if it appears to be an URL then installation media "
"that support network preseeding will download the file from the URL and use "
"it as a preconfiguration file. Here is an example of how to set it up in the "
"dhcpd.conf for version 3 of the ISC DHCP server (the isc-dhcp-server "
"&debian; package)."
msgstr ""

#. Tag: screen
#: preseed.xml:576
#, no-c-format
msgid ""
"if substring (option vendor-class-identifier, 0, 3) = \"d-i\" {\n"
"    filename \"http://host/preseed.cfg\";\n"
"}"
msgstr ""
"if substring (option vendor-class-identifier, 0, 3) = \"d-i\" {\n"
"    filename \"http://host/preseed.cfg\";\n"
"}"

#. Tag: para
#: preseed.xml:578
#, no-c-format
msgid ""
"Note that the above example limits this filename to DHCP clients that "
"identify themselves as <quote>d-i</quote>, so it will not affect regular "
"DHCP clients, but only the installer. You can also put the text in a stanza "
"for only one particular host to avoid preseeding all installs on your "
"network."
msgstr ""
"Bemærk at det ovenstående eksempel begrænser dette filnavn til DHCP-"
"klineter, som identificerer sig selv som <quote>d-i</quote>, så det vil ikke "
"påvirke normale DHCP-klienter, men kun installationsprogrammet. Du kan også "
"placere teksten i en stanza for en bestemt vært for at undgå "
"forhåndskonfiguration af alle installationer på dit netværk."

#. Tag: para
#: preseed.xml:585
#, no-c-format
msgid ""
"A good way to use the DHCP preseeding is to only preseed values specific to "
"your network, such as the &debian; mirror to use. This way installs on your "
"network will automatically get a good mirror selected, but the rest of the "
"installation can be performed interactively. Using DHCP preseeding to fully "
"automate &debian; installs should only be done with care."
msgstr ""

#. Tag: title
#: preseed.xml:599
#, no-c-format
msgid "Creating a preconfiguration file"
msgstr "Oprettelse af en forhåndskonfigurationsfil"

#. Tag: para
#: preseed.xml:600
#, no-c-format
msgid ""
"The preconfiguration file is in the format used by the <command>debconf-set-"
"selections</command> command. The general format of a line in a "
"preconfiguration file is:"
msgstr ""
"Den forhåndskonfigurerede fil er i et format brugt af kommandoen "
"<command>debconf-set-selections</command>. Det generelle format for en linje "
"i en forhåndskonfigureret fil er:"

#. Tag: screen
#: preseed.xml:606
#, no-c-format
msgid "&lt;owner&gt; &lt;question name&gt; &lt;question type&gt; &lt;value&gt;"
msgstr ""
"&lt;ejer&gt; &lt;spørgsmålsnavn&gt; &lt;spørgsmålstype&gt; &lt;værdi&gt;"

#. Tag: para
#: preseed.xml:608
#, no-c-format
msgid "The file should start with <literal>#_preseed_V1</literal>"
msgstr ""

#. Tag: para
#: preseed.xml:620
#, no-c-format
msgid ""
"There are a few rules to keep in mind when writing a preconfiguration file."
msgstr ""
"Der er nogle få regler at huske, når en forhåndskonfigurationsfil skrives."

#. Tag: para
#: preseed.xml:627
#, no-c-format
msgid ""
"Put only a single space or tab between type and value: any additional "
"whitespace will be interpreted as belonging to the value."
msgstr ""
"Placer kun et enkelt mellemrum eller indryk mellem type og værdi: Eventuelle "
"yderligere mellemrum vil blive fortolket som tilhørende værdien."

#. Tag: para
#: preseed.xml:631
#, no-c-format
msgid ""
"A line can be split into multiple lines by appending a backslash "
"(<quote><literal>\\</literal></quote>) as the line continuation character. A "
"good place to split a line is after the question name; a bad place is "
"between type and value. Split lines will be joined into a single line with "
"all leading/trailing whitespace condensed to a single space."
msgstr ""

#. Tag: para
#: preseed.xml:638
#, no-c-format
msgid ""
"For debconf variables (templates) used only in the installer itself, the "
"owner should be set to <quote>d-i</quote>; to preseed variables used in the "
"installed system, the name of the package that contains the corresponding "
"debconf template should be used. Only variables that have their owner set to "
"something other than <quote>d-i</quote> will be propagated to the debconf "
"database for the installed system."
msgstr ""

#. Tag: para
#: preseed.xml:646
#, no-c-format
msgid ""
"Most questions need to be preseeded using the values valid in English and "
"not the translated values. However, there are some questions (for example in "
"<classname>partman</classname>) where the translated values need to be used."
msgstr ""
"De fleste spørgsmål skal forhåndskonfigureres via værdierne gyldige i "
"engelsk ikke de oversatte værdier. Der er dog nogle spørgsmål (for eksempel "
"i <classname>partman</classname>) hvor de oversatte værdier skal bruges."

#. Tag: para
#: preseed.xml:652
#, no-c-format
msgid ""
"Some questions take a code as value instead of the English text that is "
"shown during installation."
msgstr ""
"Nogle spørgsmål bruger en kode som værdi i stedet for den engelske tekst som "
"vises under installationen."

#. Tag: para
#: preseed.xml:656
#, no-c-format
msgid "Start with <literal>#_preseed_V1</literal>"
msgstr "Start med <literal>#_preseed_V1</literal>"

#. Tag: para
#: preseed.xml:660
#, no-c-format
msgid ""
"A comment consists of a line which <emphasis>starts</emphasis> with a hash "
"character (<quote><literal>#</literal></quote>) and extends up to the length "
"of that line."
msgstr ""

#. Tag: para
#: preseed.xml:667
#, no-c-format
msgid ""
"The easiest way to create a preconfiguration file is to use the example file "
"linked in <xref linkend=\"preseed-contents\"/> as basis and work from there."
msgstr ""
"Den nemmeste måde at oprette en fil for forhåndskonfigurationen er at bruge "
"eksempelfilen i <xref linkend=\"preseed-contents\"/> som udgangpsunkt og "
"arbejde ud fra den."

#. Tag: para
#: preseed.xml:672
#, no-c-format
msgid ""
"An alternative method is to do a manual installation and then, after "
"rebooting, use the <command>debconf-get-selections</command> from the "
"<classname>debconf-utils</classname> package to dump both the debconf "
"database and the installer's cdebconf database to a single file:"
msgstr ""
"En alternativ metode er at udføre en manuel installation og så, efter "
"genstart at bruge <command>debconf-get-selections</command> fra pakken "
"<classname>debconf-utils</classname> til at dumpe både debconf-databsen og "
"installationsprogrammets cdebconf-database til en enkel fil:"

#. Tag: screen
#: preseed.xml:679
#, no-c-format
msgid ""
"$ echo \"#_preseed_V1\" &gt; <replaceable>file</replaceable>\n"
"$ debconf-get-selections --installer &gt;&gt; <replaceable>file</"
"replaceable>\n"
"$ debconf-get-selections &gt;&gt; <replaceable>file</replaceable>"
msgstr ""
"$ echo \"#_preseed_V1\" &gt; <replaceable>file</replaceable>\n"
"$ debconf-get-selections --installer &gt;&gt; <replaceable>file</"
"replaceable>\n"
"$ debconf-get-selections &gt;&gt; <replaceable>file</replaceable>"

#. Tag: para
#: preseed.xml:681
#, no-c-format
msgid ""
"However, a file generated in this manner will have some items that should "
"not be preseeded, and the example file is a better starting place for most "
"users."
msgstr ""
"En fil oprettet på denne måde vil dog have nogle elementer, som ikke skal "
"forhåndskonfigureres og eksempelfilen er et bedre udgangspunkt for de fleste "
"brugere."

#. Tag: para
#: preseed.xml:689
#, no-c-format
msgid ""
"This method relies on the fact that, at the end of the installation, the "
"installer's cdebconf database is saved to the installed system in <filename>/"
"var/log/installer/cdebconf</filename>. However, because the database may "
"contain sensitive information, by default the files are only readable by "
"root."
msgstr ""
"Denne metode afhænger af det faktum, at i slutningen af installationen, "
"gemmes installationsprogrammets cdebconf-database til det installerede "
"system i <filename>/var/log/installer/cdebconf</filename>. Da databasen kan "
"indeholde sensitiv information, så kan filerne som standard kun læses af "
"root (administrator)."

#. Tag: para
#: preseed.xml:697
#, no-c-format
msgid ""
"The directory <filename>/var/log/installer</filename> and all files in it "
"will be deleted from your system if you purge the package "
"<classname>installation-report</classname>."
msgstr ""
"Mappen <filename>/var/log/installer</filename> og alle filer i den vil blive "
"slettet fra dit system, hvis du fjerner pakken <classname>installation-"
"report</classname>."

#. Tag: para
#: preseed.xml:705
#, no-c-format
msgid ""
"To check possible values for questions, you can use <command>nano</command> "
"to examine the files in <filename>/var/lib/cdebconf</filename> while an "
"installation is in progress. View <filename>templates.dat</filename> for the "
"raw templates and <filename>questions.dat</filename> for the current values "
"and for the values assigned to variables."
msgstr ""
"For at kontrollere mulige værdier for spørgsmål, så kan du bruge "
"<command>nano</command> for at undersøge filerne i <filename>/var/lib/"
"cdebconf</filename> mens en installation er i gang. Vis <filename>templates."
"dat</filename> for de rå skabeloner og <filename>questions.dat</filename> "
"for de nuværende værdier og for værdierne tildelt variabler."

#. Tag: para
#: preseed.xml:713
#, no-c-format
msgid ""
"To check if the format of your preconfiguration file is valid before "
"performing an install, you can use the command <command>debconf-set-"
"selections -c <replaceable>preseed.cfg</replaceable></command>."
msgstr ""
"For at kontrollere om formatet for forhåndskonfigurationfilen er gyldig før "
"udføresel af en installation, så kan du bruge kommandoen <command>debconf-"
"set-selections -c <replaceable>preseed.cfg</replaceable></command>."

#. Tag: title
#: preseed.xml:724
#, no-c-format
msgid "Contents of the preconfiguration file (for &releasename;)"
msgstr "Indhold af forhåndskonfigurationsfilen (for &releasename;)"

#. Tag: para
#: preseed.xml:730
#, no-c-format
msgid ""
"Note that this example is based on an installation for the Intel x86 "
"architecture. If you are installing a different architecture, some of the "
"examples (like keyboard selection and bootloader installation) may not be "
"relevant and will need to be replaced by debconf settings appropriate for "
"your architecture."
msgstr ""
"Bemærk at dette eksempel er baseret på en installation for Intel x86-"
"arkitekturen. Hvis du installerer en anden arkitektur, så kan nogle af "
"eksemplerne (såsom tastatturvalg og installation af opstartsindlæser) være "
"irrelevante og skal erstattes af debconf-indstillinger passende for din "
"arkitektur."

#. Tag: para
#: preseed.xml:738
#, no-c-format
msgid ""
"Details on how the different Debian Installer components actually work can "
"be found in <xref linkend=\"module-details\"/>."
msgstr ""
"Detaljer om hvordan forskellige komponenter for Debians installationsprogram "
"fungerer kan findes i <xref linkend=\"module-details\"/>."

#. Tag: title
#: preseed.xml:746
#, no-c-format
msgid "Localization"
msgstr "Opsætning af sted"

#. Tag: para
#: preseed.xml:747
#, no-c-format
msgid ""
"During a normal install the questions about localization are asked first, so "
"these values can only be preseeded via the initrd or kernel boot parameter "
"methods. Auto mode (<xref linkend=\"preseed-auto\"/>) includes the setting "
"of <literal>auto-install/enable=true</literal> (normally via the "
"<literal>auto</literal> preseed alias). This delays the asking of the "
"localisation questions, so that they can be preseeded by any method."
msgstr ""
"Under en normal installation vil spørgsmål om sted blive spurgt først, så "
"disse værdier kan kun forhåndskonfigureres via metoderne hos initrd- eller "
"kerneopstartsparametre. Automatisk tilstand (<xref linkend=\"preseed-auto\"/"
">) inkluderer indstillingen <literal>auto-install/enable=true</literal> "
"(normalt via aliasset for forhåndskonfiguration <literal>auto</literal>). "
"Dette forsinker spørgsmålene om sted, så de kan forhåndskonfigureres med "
"enhver metode."

#. Tag: para
#: preseed.xml:756
#, no-c-format
msgid ""
"The locale can be used to specify both language and country and can be any "
"combination of a language supported by &d-i; and a recognized country. If "
"the combination does not form a valid locale, the installer will "
"automatically select a locale that is valid for the selected language. To "
"specify the locale as a boot parameter, use "
"<userinput>locale=<replaceable>en_US</replaceable></userinput>."
msgstr ""
"Stedet kan bruges til at specificere både sprog og land og kan være enhver "
"kombination af et sprog understøttet af &d-i; og et anerkendt land. Hvis "
"kombinationen ikke udgør et gyldigt sted, så vil installationsprogrammet "
"automatisk vælge et sted, som er gyldig for det valgte sprog. For at "
"specificere stedet som en opstartsparametre, så brug "
"<userinput>locale=<replaceable>en_US</replaceable></userinput>."

#. Tag: para
#: preseed.xml:765
#, no-c-format
msgid ""
"Although this method is very easy to use, it does not allow preseeding of "
"all possible combinations of language, country and locale<footnote> <para> "
"Preseeding <literal>locale</literal> to <userinput>en_NL</userinput> would "
"for example result in <literal>en_US.UTF-8</literal> as default locale for "
"the installed system. If e.g. <literal>en_GB.UTF-8</literal> is preferred "
"instead, the values will need to be preseeded individually. </para> </"
"footnote>. So alternatively the values can be preseeded individually. "
"Language and country can also be specified as boot parameters."
msgstr ""
"Selvom denne metode er meget nem at bruge, så tillader den ikke "
"forhåndskonfiguration af alle mulige kombinationer af sprog, land og "
"sted<footnote> <para> Forhåndskonfiguration af <literal>locale</literal> til "
"<userinput>en_NL</userinput> vil for eksempel medføre <literal>en_US.UTF-8</"
"literal> som standardsted for det installerede system. Hvis f.eks. "
"<literal>en_GB.UTF-8</literal> foretrækkes i stedet for, så skal værdierne "
"forhåndskonfigureres individuelt. </para> </footnote>. Så alternativt kan "
"værdierne forhåndskonfigureres individuelt. Sprog og land kan også angives "
"som opstartsparametre."

#. Tag: screen
#: preseed.xml:780
#, no-c-format
msgid ""
"# Preseeding only locale sets language, country and locale.\n"
"d-i debian-installer/locale string en_US\n"
"\n"
"# The values can also be preseeded individually for greater flexibility.\n"
"#d-i debian-installer/language string en\n"
"#d-i debian-installer/country string NL\n"
"#d-i debian-installer/locale string en_GB.UTF-8\n"
"# Optionally specify additional locales to be generated.\n"
"#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8"
msgstr ""
"# Forhåndskonfiguration af sted angiver sprog, land og sted..\n"
"d-i debian-installer/locale string en_US\n"
"\n"
"# Værdierne kan også forhåndskonfigureres individuelt for større "
"fleksibilitet.\n"
"#d-i debian-installer/language string en\n"
"#d-i debian-installer/country string NL\n"
"#d-i debian-installer/locale string en_GB.UTF-8\n"
"# Valgfrit kan yderligere steder angives for oprettelse.\n"
"#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8"

#. Tag: para
#: preseed.xml:782
#, no-c-format
msgid ""
"Keyboard configuration consists of selecting a keymap and (for non-latin "
"keymaps) a toggle key to switch between the non-latin keymap and the US "
"keymap. Only basic keymap variants are available during installation. "
"Advanced variants are available only in the installed system, through "
"<command>dpkg-reconfigure keyboard-configuration</command>."
msgstr ""
"Tastaturkonfiguration består af valg af et tastaturkort og (for andre end "
"latinske tastaturkort) en ændringstast til at skifte mellem det amerikanske "
"tastaturkort og andre ikke latinske tastaturkort. Kun grundlæggende "
"tastaturkortvarianter er tilgængelige under installation. Avancerede "
"varianter er kun tilgængelige i det installerede system, via <command>dpkg-"
"reconfigure keyboard-configuration</command>."

#. Tag: screen
#: preseed.xml:790
#, no-c-format
msgid ""
"# Keyboard selection.\n"
"d-i keyboard-configuration/xkb-keymap select us\n"
"# d-i keyboard-configuration/toggle select No toggling"
msgstr ""
"# Tastaturvalg.\n"
"d-i keyboard-configuration/xkb-keymap select us\n"
"# d-i keyboard-configuration/toggle select No toggling"

#. Tag: para
#: preseed.xml:792
#, no-c-format
msgid ""
"To skip keyboard configuration, preseed <classname>keymap</classname> with "
"<userinput>skip-config</userinput>. This will result in the kernel keymap "
"remaining active."
msgstr ""
"For at undlade tastaturkonfiguration, forhåndskonfigureres "
"<classname>keymap</classname> med <userinput>skip-config</userinput>. Dette "
"vil medføre, at kernens tastaturkort forbliver aktiv."

#. Tag: title
#: preseed.xml:804
#, no-c-format
msgid "Network configuration"
msgstr "Netværkskonfiguration"

#. Tag: para
#: preseed.xml:805
#, no-c-format
msgid ""
"Of course, preseeding the network configuration won't work if you're loading "
"your preconfiguration file from the network. But it's great when you're "
"booting from optical disc or USB stick. If you are loading preconfiguration "
"files from the network, you can pass network config parameters by using "
"kernel boot parameters."
msgstr ""

#. Tag: para
#: preseed.xml:813
#, no-c-format
msgid ""
"If you need to pick a particular interface when netbooting before loading a "
"preconfiguration file from the network, use a boot parameter such as "
"<userinput>interface=<replaceable>eth1</replaceable></userinput>."
msgstr ""
"Hvis du skal vælge en bestemt grænseflade under netopstart før indlæsning af "
"en forhåndskonfigurationsfil fra netværket, så brug en opstartsparameter "
"såsom <userinput>interface=<replaceable>eth1</replaceable></userinput>."

#. Tag: para
#: preseed.xml:819
#, no-c-format
msgid ""
"Although preseeding the network configuration is normally not possible when "
"using network preseeding (using <quote>preseed/url</quote>), you can use the "
"following hack to work around that, for example if you'd like to set a "
"static address for the network interface. The hack is to force the network "
"configuration to run again after the preconfiguration file has been loaded "
"by creating a <quote>preseed/run</quote> script containing the following "
"commands:"
msgstr ""

#. Tag: screen
#: preseed.xml:829
#, no-c-format
msgid "kill-all-dhcp; netcfg"
msgstr "kill-all-dhcp; netcfg"

#. Tag: para
#: preseed.xml:831
#, no-c-format
msgid "The following debconf variables are relevant for network configuration."
msgstr "De følgende debconf-variabler er relevante for netværkskonfiguration."

#. Tag: screen
#: preseed.xml:837
#, fuzzy, no-c-format
#| msgid ""
#| "# Disable network configuration entirely. This is useful for cdrom\n"
#| "# installations on non-networked devices where the network questions,\n"
#| "# warning and long timeouts are a nuisance.\n"
#| "#d-i netcfg/enable boolean false\n"
#| "\n"
#| "# netcfg will choose an interface that has link if possible. This makes "
#| "it\n"
#| "# skip displaying a list if there is more than one interface.\n"
#| "d-i netcfg/choose_interface select auto\n"
#| "\n"
#| "# To pick a particular interface instead:\n"
#| "#d-i netcfg/choose_interface select eth1\n"
#| "\n"
#| "# To set a different link detection timeout (default is 3 seconds).\n"
#| "# Values are interpreted as seconds.\n"
#| "#d-i netcfg/link_wait_timeout string 10\n"
#| "\n"
#| "# If you have a slow dhcp server and the installer times out waiting for\n"
#| "# it, this might be useful.\n"
#| "#d-i netcfg/dhcp_timeout string 60\n"
#| "#d-i netcfg/dhcpv6_timeout string 60\n"
#| "\n"
#| "# If you prefer to configure the network manually, uncomment this line "
#| "and\n"
#| "# the static network configuration below.\n"
#| "#d-i netcfg/disable_autoconfig boolean true\n"
#| "\n"
#| "# If you want the preconfiguration file to work on systems both with and\n"
#| "# without a dhcp server, uncomment these lines and the static network\n"
#| "# configuration below.\n"
#| "#d-i netcfg/dhcp_failed note\n"
#| "#d-i netcfg/dhcp_options select Configure network manually\n"
#| "\n"
#| "# Static network configuration.\n"
#| "#\n"
#| "# IPv4 example\n"
#| "#d-i netcfg/get_ipaddress string 192.168.1.42\n"
#| "#d-i netcfg/get_netmask string 255.255.255.0\n"
#| "#d-i netcfg/get_gateway string 192.168.1.1\n"
#| "#d-i netcfg/get_nameservers string 192.168.1.1\n"
#| "#d-i netcfg/confirm_static boolean true\n"
#| "#\n"
#| "# IPv6 example\n"
#| "#d-i netcfg/get_ipaddress string fc00::2\n"
#| "#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::\n"
#| "#d-i netcfg/get_gateway string fc00::1\n"
#| "#d-i netcfg/get_nameservers string fc00::1\n"
#| "#d-i netcfg/confirm_static boolean true\n"
#| "\n"
#| "# Any hostname and domain names assigned from dhcp take precedence over\n"
#| "# values set here. However, setting the values still prevents the "
#| "questions\n"
#| "# from being shown, even if values come from dhcp.\n"
#| "d-i netcfg/get_hostname string unassigned-hostname\n"
#| "d-i netcfg/get_domain string unassigned-domain\n"
#| "\n"
#| "# If you want to force a hostname, regardless of what either the DHCP\n"
#| "# server returns or what the reverse DNS entry for the IP is, uncomment\n"
#| "# and adjust the following line.\n"
#| "#d-i netcfg/hostname string somehost\n"
#| "\n"
#| "# Disable that annoying WEP key dialog.\n"
#| "d-i netcfg/wireless_wep string\n"
#| "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
#| "#d-i netcfg/dhcp_hostname string radish\n"
#| "\n"
#| "# If non-free firmware is needed for the network or other hardware, you "
#| "can\n"
#| "# configure the installer to always try to load it, without prompting. "
#| "Or\n"
#| "# change to false to disable asking.\n"
#| "#d-i hw-detect/load_firmware boolean true"
msgid ""
"# Disable network configuration entirely. This is useful for cdrom\n"
"# installations on non-networked devices where the network questions,\n"
"# warning and long timeouts are a nuisance.\n"
"#d-i netcfg/enable boolean false\n"
"\n"
"# netcfg will choose an interface that has link if possible. This makes it\n"
"# skip displaying a list if there is more than one interface.\n"
"d-i netcfg/choose_interface select auto\n"
"\n"
"# To pick a particular interface instead:\n"
"#d-i netcfg/choose_interface select eth1\n"
"\n"
"# To set a different link detection timeout (default is 3 seconds).\n"
"# Values are interpreted as seconds.\n"
"#d-i netcfg/link_wait_timeout string 10\n"
"\n"
"# If you have a slow dhcp server and the installer times out waiting for\n"
"# it, this might be useful.\n"
"#d-i netcfg/dhcp_timeout string 60\n"
"#d-i netcfg/dhcpv6_timeout string 60\n"
"\n"
"# Automatic network configuration is the default.\n"
"# If you prefer to configure the network manually, uncomment this line and\n"
"# the static network configuration below.\n"
"#d-i netcfg/disable_autoconfig boolean true\n"
"\n"
"# If you want the preconfiguration file to work on systems both with and\n"
"# without a dhcp server, uncomment these lines and the static network\n"
"# configuration below.\n"
"#d-i netcfg/dhcp_failed note\n"
"#d-i netcfg/dhcp_options select Configure network manually\n"
"\n"
"# Static network configuration.\n"
"#\n"
"# IPv4 example\n"
"#d-i netcfg/get_ipaddress string 192.168.1.42\n"
"#d-i netcfg/get_netmask string 255.255.255.0\n"
"#d-i netcfg/get_gateway string 192.168.1.1\n"
"#d-i netcfg/get_nameservers string 192.168.1.1\n"
"#d-i netcfg/confirm_static boolean true\n"
"#\n"
"# IPv6 example\n"
"#d-i netcfg/get_ipaddress string fc00::2\n"
"#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::\n"
"#d-i netcfg/get_gateway string fc00::1\n"
"#d-i netcfg/get_nameservers string fc00::1\n"
"#d-i netcfg/confirm_static boolean true\n"
"\n"
"# Any hostname and domain names assigned from dhcp take precedence over\n"
"# values set here. However, setting the values still prevents the questions\n"
"# from being shown, even if values come from dhcp.\n"
"d-i netcfg/get_hostname string unassigned-hostname\n"
"d-i netcfg/get_domain string unassigned-domain\n"
"\n"
"# If you want to force a hostname, regardless of what either the DHCP\n"
"# server returns or what the reverse DNS entry for the IP is, uncomment\n"
"# and adjust the following line.\n"
"#d-i netcfg/hostname string somehost\n"
"\n"
"# Disable that annoying WEP key dialog.\n"
"d-i netcfg/wireless_wep string\n"
"# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
"#d-i netcfg/dhcp_hostname string radish\n"
"\n"
"# If non-free firmware is needed for the network or other hardware, you can\n"
"# configure the installer to always try to load it, without prompting. Or\n"
"# change to false to disable asking.\n"
"#d-i hw-detect/load_firmware boolean true"
msgstr ""
"# Deaktiver netværkskonfiguration helt. Dette er nyttigt for cd-rom-\n"
"# installationer på enheder uden netværk, hvor netværksspørgsmålene,\n"
"# advarsel og lange tidsudløb er til gene.\n"
"#d-i netcfg/enable boolean false\n"
"\n"
"# netcfg vil vælge en grænseflade, der har link hvis muligt. Dette gør, at\n"
"# der udelades visning af en liste hvis der er mere end en grænseflade.\n"
"d-i netcfg/choose_interface select auto\n"
"\n"
"# For at vælge en bestemt grænseflade i stedet for:\n"
"#d-i netcfg/choose_interface select eth1\n"
"\n"
"# For at angive et andet link-registreringstidsudløb (standarden er 3\n"
"# sekunder). Værdier fortolkes som sekunder.\n"
"#d-i netcfg/link_wait_timeout string 10\n"
"\n"
"# Hvis du har en langsom dhcp-server og installationsprogrammet får "
"tidsudløb\n"
"# af at vente, så kan dette være nyttigt.\n"
"#d-i netcfg/dhcp_timeout string 60\n"
"#d-i netcfg/dhcpv6_timeout string 60\n"
"\n"
"# Hvis du foretrækker at konfigurere netværket manuelt, så udkommenter "
"denne\n"
"# linje og den statiske netværkskonfiguration nedenfor.\n"
"#d-i netcfg/disable_autoconfig boolean true\n"
"\n"
"# Hvis du ønsker at filen med forhåndskonfigurationen skal fungere på\n"
"# systemer både med og uden en dhcp-server, så udkommenter disse linjer og\n"
"# den statiske netværkskonfiguration nedenfor.\n"
"#d-i netcfg/dhcp_failed note\n"
"#d-i netcfg/dhcp_options select Configure network manually\n"
"\n"
"# Statisk netværkskonfiguration.\n"
"#\n"
"# IPv4-eksempel\n"
"#d-i netcfg/get_ipaddress string 192.168.1.42\n"
"#d-i netcfg/get_netmask string 255.255.255.0\n"
"#d-i netcfg/get_gateway string 192.168.1.1\n"
"#d-i netcfg/get_nameservers string 192.168.1.1\n"
"#d-i netcfg/confirm_static boolean true\n"
"#\n"
"# IPv6-eksempel\n"
"#d-i netcfg/get_ipaddress string fc00::2\n"
"#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::\n"
"#d-i netcfg/get_gateway string fc00::1\n"
"#d-i netcfg/get_nameservers string fc00::1\n"
"#d-i netcfg/confirm_static boolean true\n"
"\n"
"# Ethvert værtsnavn og domænenavne tildelt fra dhcp har forrang over "
"værdier\n"
"# angivet her. Indstilling af værdierne vil dog stadig forhindre "
"spørgsmålene\n"
"# i at blive vist, selv hvis værdierne kommer fra dhcp.\n"
"d-i netcfg/get_hostname string unassigned-hostname\n"
"d-i netcfg/get_domain string unassigned-domain\n"
"\n"
"# Hvis du ønsker at bruge et værtsnavn med tvang, uanset hvad enten DHCP-\n"
"# serveren returnerer eller hvad det omvendte DNS-element for IP'en er, så\n"
"# udkommenter og juster den følgende linje.\n"
"#d-i netcfg/hostname string somehost\n"
"\n"
"# Deaktiver den irriterende WEP-nøgledialog.\n"
"d-i netcfg/wireless_wep string\n"
"# Det flippede dhcp-værtsnavn, som nogle ISP'er bruger som en form for\n"
"# adgangskode.\n"
"#d-i netcfg/dhcp_hostname string radish\n"
"\n"
"# Hvis non-free (ufri) firmware er krævet for netværket eller andet udstyr,\n"
"# så kan du konfigurere installationsprogrammet til altid at prøve at "
"indlæse\n"
"# det uden at spørge. Eller ændre til falsk (false) for at deaktivere\n"
"# spørgsmål.\n"
"#d-i hw-detect/load_firmware boolean true"

#. Tag: para
#: preseed.xml:839
#, no-c-format
msgid ""
"Please note that <command>netcfg</command> will automatically determine the "
"netmask if <classname>netcfg/get_netmask</classname> is not preseeded. In "
"this case, the variable has to be marked as <literal>seen</literal> for "
"automatic installations. Similarly, <command>netcfg</command> will choose an "
"appropriate address if <classname>netcfg/get_gateway</classname> is not set. "
"As a special case, you can set <classname>netcfg/get_gateway</classname> to "
"<quote>none</quote> to specify that no gateway should be used."
msgstr ""

#. Tag: title
#: preseed.xml:855
#, no-c-format
msgid "Network console"
msgstr "Netværkskonsol"

#. Tag: screen
#: preseed.xml:857
#, no-c-format
msgid ""
"# Use the following settings if you wish to make use of the network-console\n"
"# component for remote installation over SSH. This only makes sense if you\n"
"# intend to perform the remainder of the installation manually.\n"
"#d-i anna/choose_modules string network-console\n"
"#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key\n"
"#d-i network-console/password password r00tme\n"
"#d-i network-console/password-again password r00tme"
msgstr ""
"# Brug de følgende indstillinger, hvis du ønsker at gøre brug af "
"komponenten\n"
"# network-console for ekstern installation over SSH. Dette giver kun mening\n"
"# hvis du forventer at udføre den resterende installation manuelt.\n"
"#d-i anna/choose_modules string network-console\n"
"#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key\n"
"#d-i network-console/password password r00tme\n"
"#d-i network-console/password-again password r00tme"

#. Tag: para
#: preseed.xml:859
#, no-c-format
msgid ""
"More information related to network-console can be found in <xref linkend="
"\"network-console\"/>."
msgstr ""

#. Tag: title
#: preseed.xml:869
#, no-c-format
msgid "Mirror settings"
msgstr "Spejlindstillinger"

#. Tag: para
#: preseed.xml:870
#, no-c-format
msgid ""
"Depending on the installation method you use, a mirror may be used to "
"download additional components of the installer, to install the base system, "
"and to set up the <filename>/etc/apt/sources.list</filename> for the "
"installed system."
msgstr ""
"Afhængig af installationsmetoden du anvender, kan et spejl bruges til at "
"hente yderligere komponenter for installationsprogrammet, for at installere "
"det grundlæggende system og opsætte <filename>/etc/apt/sources.list</"
"filename> for det installerede system."

#. Tag: para
#: preseed.xml:877
#, no-c-format
msgid ""
"The parameter <classname>mirror/suite</classname> determines the suite for "
"the installed system."
msgstr ""
"Parameteren <classname>mirror/suite</classname> bestemmer programpakken for "
"det installerede system."

#. Tag: para
#: preseed.xml:882
#, no-c-format
msgid ""
"The parameter <classname>mirror/udeb/suite</classname> determines the suite "
"for additional components for the installer. It is only useful to set this "
"if components are actually downloaded over the network and should match the "
"suite that was used to build the initrd for the installation method used for "
"the installation. Normally the installer will automatically use the correct "
"value and there should be no need to set this."
msgstr ""
"Parameteren <classname>mirror/udeb/suite</classname> bestemmer programpakken "
"for yderligere komponenter for installationsprogrammet. Den er kun nyttigt "
"at angive denne, hvis komponenterne faktisk hentes over netværket og skal "
"matche programpakken, som blev brugt til at bygge initrd'en for "
"installationsmetoden brugt for installationen. Normalt vil "
"installationsprogrammet automatisk brug den korrekte værdi og der bør derfor "
"ikke være behov for at angive denne."

#. Tag: screen
#: preseed.xml:893
#, fuzzy, no-c-format
#| msgid ""
#| "# If you select ftp, the mirror/country string does not need to be set.\n"
#| "#d-i mirror/protocol string ftp\n"
#| "d-i mirror/country string manual\n"
#| "d-i mirror/http/hostname string &archive-mirror;\n"
#| "d-i mirror/http/directory string /debian\n"
#| "d-i mirror/http/proxy string\n"
#| "\n"
#| "# Suite to install.\n"
#| "#d-i mirror/suite string testing\n"
#| "# Suite to use for loading installer components (optional).\n"
#| "#d-i mirror/udeb/suite string testing"
msgid ""
"# Mirror protocol:\n"
"# If you select ftp, the mirror/country string does not need to be set.\n"
"# Default value for the mirror protocol: http.\n"
"#d-i mirror/protocol string ftp\n"
"d-i mirror/country string manual\n"
"d-i mirror/http/hostname string &archive-mirror;\n"
"d-i mirror/http/directory string /debian\n"
"d-i mirror/http/proxy string\n"
"\n"
"# Suite to install.\n"
"#d-i mirror/suite string testing\n"
"# Suite to use for loading installer components (optional).\n"
"#d-i mirror/udeb/suite string testing"
msgstr ""
"# Hvis du vælger ftp, så skal spejl/land-strengen ikke være angivet.\n"
"#d-i mirror/protocol string ftp\n"
"d-i mirror/country string manual\n"
"d-i mirror/http/hostname string &archive-mirror;\n"
"d-i mirror/http/directory string /debian\n"
"d-i mirror/http/proxy string\n"
"\n"
"# Programpakke at installere.\n"
"#d-i mirror/suite string testing\n"
"# Programpakke for indlæsning af installationsprogrammets komponenter\n"
"# (valgfri).\n"
"#d-i mirror/udeb/suite string testing"

#. Tag: title
#: preseed.xml:898
#, no-c-format
msgid "Account setup"
msgstr "Kontoopsætning"

#. Tag: para
#: preseed.xml:899
#, no-c-format
msgid ""
"The password for the root account and name and password for a first regular "
"user's account can be preseeded. For the passwords you can use either clear "
"text values or crypt(3) <emphasis>hashes</emphasis>."
msgstr ""
"Adgangskoden for root-kontoen og navn og adgangskode for den første normale "
"brugers konto kan forhåndskonfigureres. For adgangskoderne kan du enten "
"bruge rene tekstværdier eller crypt(3)-<emphasis>hasher</emphasis>."

#. Tag: para
#: preseed.xml:906
#, no-c-format
msgid ""
"Be aware that preseeding passwords is not completely secure as everyone with "
"access to the preconfiguration file will have the knowledge of these "
"passwords. Storing hashed passwords is considered secure unless a weak "
"hashing algorithm like DES or MD5 is used which allow for bruteforce "
"attacks. Recommended password hashing algorithms are SHA-256 and SHA512."
msgstr ""
"Vær opmærksom på at forhåndskonfiguration af adgangskoder ikke er "
"fuldstændig sikker da alle med adgang til den forhåndskonfigurerede fil vil "
"have viden om disse adgangskoder. Lagring af hashede adgangskoder anses for "
"at være sikker medmindre at en svag hashingalgoritme såsom DES eller MD5 "
"bruges; de giver mulighed for »bruteforce«-angreb. Anbefalede "
"hashingalgoritmer for adgangskoder er SHA-256 og SHA512."

#. Tag: screen
#: preseed.xml:916
#, no-c-format
msgid ""
"# Skip creation of a root account (normal user account will be able to\n"
"# use sudo).\n"
"#d-i passwd/root-login boolean false\n"
"# Alternatively, to skip creation of a normal user account.\n"
"#d-i passwd/make-user boolean false\n"
"\n"
"# Root password, either in clear text\n"
"#d-i passwd/root-password password r00tme\n"
"#d-i passwd/root-password-again password r00tme\n"
"# or encrypted using a crypt(3)  hash.\n"
"#d-i passwd/root-password-crypted password [crypt(3) hash]\n"
"\n"
"# To create a normal user account.\n"
"#d-i passwd/user-fullname string Debian User\n"
"#d-i passwd/username string debian\n"
"# Normal user's password, either in clear text\n"
"#d-i passwd/user-password password insecure\n"
"#d-i passwd/user-password-again password insecure\n"
"# or encrypted using a crypt(3) hash.\n"
"#d-i passwd/user-password-crypted password [crypt(3) hash]\n"
"# Create the first user with the specified UID instead of the default.\n"
"#d-i passwd/user-uid string 1010\n"
"\n"
"# The user account will be added to some standard initial groups. To\n"
"# override that, use this.\n"
"#d-i passwd/user-default-groups string audio cdrom video"
msgstr ""
"# Udelad oprettelsen af en root-konto (normal brugerkonto vil kunne\n"
"# anvende sudo).\n"
"#d-i passwd/root-login boolean false\n"
"# Alternativet, for at undlade oprettelsen af en normal brugerkonto.\n"
"#d-i passwd/make-user boolean false\n"
"\n"
"# Root-adgangskode, enten i klar tekst\n"
"#d-i passwd/root-password password r00tme\n"
"#d-i passwd/root-password-again password r00tme\n"
"# eller krypteret via en crypt(3)-hash.\n"
"#d-i passwd/root-password-crypted password [crypt(3) hash]\n"
"\n"
"# For at oprette en normal brugerkonto.\n"
"#d-i passwd/user-fullname string Debian User\n"
"#d-i passwd/username string debian\n"
"# Normal brugers adgangskode, enten i klar tekst\n"
"#d-i passwd/user-password password insecure\n"
"#d-i passwd/user-password-again password insecure\n"
"# eller krypteret via en crypt(3)-hash.\n"
"#d-i passwd/user-password-crypted password [crypt(3) hash]\n"
"# Opret den første bruger med den specificerde UID i stedet for standarden.\n"
"#d-i passwd/user-uid string 1010\n"
"\n"
"# Brugerkontoen vil blive tilføjet til nogle opstartsgrupper. For at\n"
"# omgå dette, så brug følgende.\n"
"#d-i passwd/user-default-groups string audio cdrom video"

#. Tag: para
#: preseed.xml:918
#, no-c-format
msgid ""
"The <classname>passwd/root-password-crypted</classname> and "
"<classname>passwd/user-password-crypted</classname> variables can also be "
"preseeded with <quote>!</quote> as their value. In that case, the "
"corresponding account is disabled. This may be convenient for the root "
"account, provided of course that an alternative method is set up to allow "
"administrative activities or root login (for instance by using SSH key "
"authentication or <command>sudo</command>)."
msgstr ""
"Variablerne <classname>passwd/root-password-crypted</classname> og "
"<classname>passwd/user-password-crypted</classname> kan også "
"forhåndskonfigureres med <quote>!</quote> som deres værdi. I det tilfælde, "
"bliver den tilsvarende konto deaktiveret. Dette kan være nyttigt for root-"
"kontoen, selvfølgelig såfremt en alternativ metode er opsat til at tillade "
"administrative aktiviteter eller root-logind (for eksempel ved at bruge SSH-"
"nøglegodkendelse eller <command>sudo</command>)."

#. Tag: para
#: preseed.xml:928
#, no-c-format
msgid ""
"The following command (available from the <classname>whois</classname> "
"package) can be used to generate a SHA-512 based crypt(3) hash for a "
"password:"
msgstr ""
"Den følgende kommando (tilgængelig fra pakken <classname>whois</classname>) "
"kan bruges til at oprette en SHA-512-baseret crypt(3)-hash for en "
"adgangskode:"

#. Tag: screen
#: preseed.xml:933
#, no-c-format
msgid "mkpasswd -m sha-512"
msgstr "mkpasswd -m sha-512"

#. Tag: title
#: preseed.xml:939
#, no-c-format
msgid "Clock and time zone setup"
msgstr "Ur- og tidszoneopsætning"

#. Tag: screen
#: preseed.xml:941
#, no-c-format
msgid ""
"# Controls whether or not the hardware clock is set to UTC.\n"
"d-i clock-setup/utc boolean true\n"
"\n"
"# You may set this to any valid setting for $TZ; see the contents of\n"
"# /usr/share/zoneinfo/ for valid values.\n"
"d-i time/zone string US/Eastern\n"
"\n"
"# Controls whether to use NTP to set the clock during the install\n"
"d-i clock-setup/ntp boolean true\n"
"# NTP server to use. The default is almost always fine here.\n"
"#d-i clock-setup/ntp-server string ntp.example.com"
msgstr ""
"# Kontrollerer om udstyrets ur er sat til UTC.\n"
"d-i clock-setup/utc boolean true\n"
"\n"
"# Du kan sætte dette til enhver gyldig indstilling for $TZ; se indholdet af\n"
"# /usr/share/zoneinfo/ for gyldige værdier.\n"
"d-i time/zone string US/Eastern\n"
"\n"
"# Kontrollerer om NTP skal bruges til at sætte uret under installationen\n"
"d-i clock-setup/ntp boolean true\n"
"# NTP-server at bruge. Standarden er næsten altid fin her.\n"
"#d-i clock-setup/ntp-server string ntp.example.com"

#. Tag: title
#: preseed.xml:946
#, no-c-format
msgid "Partitioning"
msgstr "Partitionering"

#. Tag: para
#: preseed.xml:947
#, no-c-format
msgid ""
"Using preseeding to partition the harddisk is limited to what is supported "
"by <classname>partman-auto</classname>. You can choose to partition either "
"existing free space on a disk or a whole disk. The layout of the disk can be "
"determined by using a predefined recipe, a custom recipe from a recipe file "
"or a recipe included in the preconfiguration file."
msgstr ""
"Brug af forhåndskonfiguration til at partitionere harddisken er begrænset "
"til det som <classname>partman-auto</classname> understøtter. Du kan vælge "
"at partitionere enten eksisterende fri plads på en disk eller en hel disk. "
"Layouttet på disken kan bestemmes ved at bruge en på forhånd defineret "
"opskrift, en brugeropskrift fra en opskriftsfil eller en opskrift inkluderet "
"i forhåndskonfigurationsfilen."

#. Tag: para
#: preseed.xml:955
#, no-c-format
msgid ""
"Preseeding of advanced partition setups using RAID, LVM and encryption is "
"supported, but not with the full flexibility possible when partitioning "
"during a non-preseeded install."
msgstr ""
"Forhåndskonfiguration af avancerede partitionsopsætninger via brug af RAID, "
"LVM og kryptering er understøttet, men ikke med den fulde fleksibilitet "
"under partitionering under en installation uden forhåndskonfiguration."

#. Tag: para
#: preseed.xml:961
#, no-c-format
msgid ""
"The examples below only provide basic information on the use of recipes. For "
"detailed information see the files <filename>partman-auto-recipe.txt</"
"filename> and <filename>partman-auto-raid-recipe.txt</filename> included in "
"the <classname>debian-installer</classname> package. Both files are also "
"available from the <ulink url=\"&url-d-i-doc-devel;\">&d-i; source "
"repository</ulink>. Note that the supported functionality may change between "
"releases."
msgstr ""
"Eksemplerne nedenfor viser kun grundlæggende information vedrørende brugen "
"af opskrifter. Se filerne <filename>partman-auto-recipe.txt</filename> og "
"<filename>partman-auto-raid-recipe.txt</filename> inkluderet i pakken "
"<classname>debian-installer</classname> for alle detaljer. Begge filer er "
"også tilgængelig fra <ulink url=\"&url-d-i-doc-devel;\">&d-i; kildearkivet</"
"ulink>. Bemærk at den understøttede funktionalitet kan ændre sig mellem "
"udgivelser."

#. Tag: para
#: preseed.xml:975
#, no-c-format
msgid ""
"The identification of disks is dependent on the order in which their drivers "
"are loaded. If there are multiple disks in the system, make very sure the "
"correct one will be selected before using preseeding."
msgstr ""
"Identifikationen af diske er afhængige af rækkefølgen, som deres drivere "
"indlæses i. Hvis der er flere diske i systemet, så sikr dig, at den korrekte "
"vil blive valgt, før forhåndskonfiguration anvendes."

#. Tag: title
#: preseed.xml:984
#, no-c-format
msgid "Partitioning example"
msgstr "Partitioneringseksempel"

#. Tag: screen
#: preseed.xml:986
#, no-c-format
msgid ""
"# If the system has free space you can choose to only partition that space.\n"
"# This is only honoured if partman-auto/method (below) is not set.\n"
"#d-i partman-auto/init_automatically_partition select biggest_free\n"
"\n"
"# Alternatively, you may specify a disk to partition. If the system has "
"only\n"
"# one disk the installer will default to using that, but otherwise the "
"device\n"
"# name must be given in traditional, non-devfs format (so e.g. /dev/sda\n"
"# and not e.g. /dev/discs/disc0/disc).\n"
"# For example, to use the first SCSI/SATA hard disk:\n"
"#d-i partman-auto/disk string /dev/sda\n"
"# In addition, you'll need to specify the method to use.\n"
"# The presently available methods are:\n"
"# - regular: use the usual partition types for your architecture\n"
"# - lvm:     use LVM to partition the disk\n"
"# - crypto:  use LVM within an encrypted partition\n"
"d-i partman-auto/method string lvm\n"
"\n"
"# You can define the amount of space that will be used for the LVM volume\n"
"# group. It can either be a size with its unit (eg. 20 GB), a percentage of\n"
"# free space or the 'max' keyword.\n"
"d-i partman-auto-lvm/guided_size string max\n"
"\n"
"# If one of the disks that are going to be automatically partitioned\n"
"# contains an old LVM configuration, the user will normally receive a\n"
"# warning. This can be preseeded away...\n"
"d-i partman-lvm/device_remove_lvm boolean true\n"
"# The same applies to pre-existing software RAID array:\n"
"d-i partman-md/device_remove_md boolean true\n"
"# And the same goes for the confirmation to write the lvm partitions.\n"
"d-i partman-lvm/confirm boolean true\n"
"d-i partman-lvm/confirm_nooverwrite boolean true\n"
"\n"
"# You can choose one of the three predefined partitioning recipes:\n"
"# - atomic: all files in one partition\n"
"# - home:   separate /home partition\n"
"# - multi:  separate /home, /var, and /tmp partitions\n"
"d-i partman-auto/choose_recipe select atomic\n"
"\n"
"# Or provide a recipe of your own...\n"
"# If you have a way to get a recipe file into the d-i environment, you can\n"
"# just point at it.\n"
"#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n"
"\n"
"# If not, you can put an entire recipe into the preconfiguration file in "
"one\n"
"# (logical) line. This example creates a small /boot partition, suitable\n"
"# swap, and uses the rest of the space for the root partition:\n"
"#d-i partman-auto/expert_recipe string                         \\\n"
"#      boot-root ::                                            \\\n"
"#              40 50 100 ext3                                  \\\n"
"#                      $primary{ } $bootable{ }                \\\n"
"#                      method{ format } format{ }              \\\n"
"#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
"#                      mountpoint{ /boot }                     \\\n"
"#              .                                               \\\n"
"#              500 10000 1000000000 ext3                       \\\n"
"#                      method{ format } format{ }              \\\n"
"#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
"#                      mountpoint{ / }                         \\\n"
"#              .                                               \\\n"
"#              64 512 300% linux-swap                          \\\n"
"#                      method{ swap } format{ }                \\\n"
"#              .\n"
"\n"
"# The full recipe format is documented in the file partman-auto-recipe.txt\n"
"# included in the 'debian-installer' package or available from D-I source\n"
"# repository. This also documents how to specify settings such as file\n"
"# system labels, volume group names and which physical devices to include\n"
"# in a volume group.\n"
"\n"
"## Partitioning for EFI\n"
"# If your system needs an EFI partition you could add something like\n"
"# this to the recipe above, as the first element in the recipe:\n"
"#               538 538 1075 free                              \\\n"
"#                      $iflabel{ gpt }                         \\\n"
"#                      $reusemethod{ }                         \\\n"
"#                      method{ efi }                           \\\n"
"#                      format{ }                               \\\n"
"#               .                                              \\\n"
"#\n"
"# The fragment above is for the amd64 architecture; the details may be\n"
"# different on other architectures. The 'partman-auto' package in the\n"
"# D-I source repository may have an example you can follow.\n"
"\n"
"# This makes partman automatically partition without confirmation, provided\n"
"# that you told it what to do using one of the methods above.\n"
"d-i partman-partitioning/confirm_write_new_label boolean true\n"
"d-i partman/choose_partition select finish\n"
"d-i partman/confirm boolean true\n"
"d-i partman/confirm_nooverwrite boolean true\n"
"\n"
"# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.\n"
"#d-i partman-efi/non_efi_system boolean true\n"
"# Ensure the partition table is GPT - this is required for EFI\n"
"#d-i partman-partitioning/choose_label select gpt\n"
"#d-i partman-partitioning/default_label string gpt\n"
"\n"
"# When disk encryption is enabled, skip wiping the partitions beforehand.\n"
"#d-i partman-auto-crypto/erase_disks boolean false"
msgstr ""

#. Tag: title
#: preseed.xml:990
#, no-c-format
msgid "Partitioning using RAID"
msgstr "Partitionering med brug af RAID"

#. Tag: para
#: preseed.xml:991
#, no-c-format
msgid ""
"You can also use preseeding to set up partitions on software RAID arrays. "
"Supported are RAID levels 0, 1, 5, 6 and 10, creating degraded arrays and "
"specifying spare devices."
msgstr ""
"Du kan også bruge forhåndskonfiguration til at opsætte partitioner på "
"program-RAID-arrayer. Understøttet er RAID-niveauerne 0, 1, 5, 6 og 10, der "
"opretter degraded arrayer og specificerer ledige enheder."

#. Tag: para
#: preseed.xml:997
#, no-c-format
msgid ""
"If you are using RAID 1, you can preseed grub to install to all devices used "
"in the array; see <xref linkend=\"preseed-bootloader\"/>."
msgstr ""
"Hvis du bruger RAID 1, så kan du forhåndskonfigurere grub til at installere "
"alle enheder brugt i tabellen; se <xref linkend=\"preseed-bootloader\"/>."

#. Tag: para
#: preseed.xml:1004
#, no-c-format
msgid ""
"This type of automated partitioning is easy to get wrong. It is also "
"functionality that receives relatively little testing from the developers of "
"&d-i;. The responsibility to get the various recipes right (so they make "
"sense and don't conflict) lies with the user. Check <filename>/var/log/"
"syslog</filename> if you run into problems."
msgstr ""
"Denne type af automatiseret partitionering er nem at få gjort forkert. Det "
"er også funktionalitet som modtager forholdsvis lidt test fra udviklerens "
"side hos &d-i;. Ansvaret for at de forskellige opskrifter er korrekte (så de "
"giver mening og ikke er i konflikt) ligger hos brugeren. Kontroller "
"<filename>/var/log/syslog</filename> hvis du får problemer."

#. Tag: screen
#: preseed.xml:1014
#, no-c-format
msgid ""
"# The method should be set to \"raid\".\n"
"#d-i partman-auto/method string raid\n"
"# Specify the disks to be partitioned. They will all get the same layout,\n"
"# so this will only work if the disks are the same size.\n"
"#d-i partman-auto/disk string /dev/sda /dev/sdb\n"
"\n"
"# Next you need to specify the physical partitions that will be used. \n"
"#d-i partman-auto/expert_recipe string \\\n"
"#      multiraid ::                                         \\\n"
"#              1000 5000 4000 raid                          \\\n"
"#                      $primary{ } method{ raid }           \\\n"
"#              .                                            \\\n"
"#              64 512 300% raid                             \\\n"
"#                      method{ raid }                       \\\n"
"#              .                                            \\\n"
"#              500 10000 1000000000 raid                    \\\n"
"#                      method{ raid }                       \\\n"
"#              .\n"
"\n"
"# Last you need to specify how the previously defined partitions will be\n"
"# used in the RAID setup. Remember to use the correct partition numbers\n"
"# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;\n"
"# devices are separated using \"#\".\n"
"# Parameters are:\n"
"# &lt;raidtype&gt; &lt;devcount&gt; &lt;sparecount&gt; &lt;fstype&gt; &lt;"
"mountpoint&gt; \\\n"
"#          &lt;devices&gt; &lt;sparedevices&gt;\n"
"\n"
"#d-i partman-auto-raid/recipe string \\\n"
"#    1 2 0 ext3 /                    \\\n"
"#          /dev/sda1#/dev/sdb1       \\\n"
"#    .                               \\\n"
"#    1 2 0 swap -                    \\\n"
"#          /dev/sda5#/dev/sdb5       \\\n"
"#    .                               \\\n"
"#    0 2 0 ext3 /home                \\\n"
"#          /dev/sda6#/dev/sdb6       \\\n"
"#    .\n"
"\n"
"# For additional information see the file partman-auto-raid-recipe.txt\n"
"# included in the 'debian-installer' package or available from D-I source\n"
"# repository.\n"
"\n"
"# This makes partman automatically partition without confirmation.\n"
"d-i partman-md/confirm boolean true\n"
"d-i partman-partitioning/confirm_write_new_label boolean true\n"
"d-i partman/choose_partition select finish\n"
"d-i partman/confirm boolean true\n"
"d-i partman/confirm_nooverwrite boolean true"
msgstr ""
"# Metoden skal være »raid«.\n"
"#d-i partman-auto/method string raid\n"
"# Specificer diskene der skal partitioneres. De får alle samme layout,\n"
"# så dette vil kun fungere hvis diskene er af samme størrelse.\n"
"#d-i partman-auto/disk string /dev/sda /dev/sdb\n"
"\n"
"# Derefter skal du angive de fysiske partitioner. \n"
"#d-i partman-auto/expert_recipe string \\\n"
"#      multiraid ::                                         \\\n"
"#              1000 5000 4000 raid                          \\\n"
"#                      $primary{ } method{ raid }           \\\n"
"#              .                                            \\\n"
"#              64 512 300% raid                             \\\n"
"#                      method{ raid }                       \\\n"
"#              .                                            \\\n"
"#              500 10000 1000000000 raid                    \\\n"
"#                      method{ raid }                       \\\n"
"#              .\n"
"\n"
"# Til sidst skal du angive hvordan de tidligere definerede partionerer skal\n"
"# bruges i RAID-opsætningen. Husk at bruge de korrekte partitionsnumre\n"
"# for logiske partitioner. RAID-niveauerne 0, 1, 5, 6 og 10 er "
"understøttet;\n"
"# enheder adskilles med »#«.\n"
"# Parametre er:\n"
"# &lt;raidtype&gt; &lt;devcount&gt; &lt;sparecount&gt; &lt;fstype&gt; &lt;"
"mountpoint&gt; \\\n"
"#          &lt;devices&gt; &lt;sparedevices&gt;\n"
"\n"
"#d-i partman-auto-raid/recipe string \\\n"
"#    1 2 0 ext3 /                    \\\n"
"#          /dev/sda1#/dev/sdb1       \\\n"
"#    .                               \\\n"
"#    1 2 0 swap -                    \\\n"
"#          /dev/sda5#/dev/sdb5       \\\n"
"#    .                               \\\n"
"#    0 2 0 ext3 /home                \\\n"
"#          /dev/sda6#/dev/sdb6       \\\n"
"#    .\n"
"\n"
"# Se filen partman-auto-raid-recipe.txt for yderligere information\n"
"# inkluderet i pakken »debian-installer« eller tilgængelig fra D-I-\n"
"# kildearkivet.\n"
"\n"
"# Denne opsætning får partman til automatisk at partitionere uden "
"bekræftelse.\n"
"d-i partman-md/confirm boolean true\n"
"d-i partman-partitioning/confirm_write_new_label boolean true\n"
"d-i partman/choose_partition select finish\n"
"d-i partman/confirm boolean true\n"
"d-i partman/confirm_nooverwrite boolean true"

#. Tag: title
#: preseed.xml:1019
#, no-c-format
msgid "Controlling how partitions are mounted"
msgstr "Kontrol af hvordan partitionerne monteres"

#. Tag: para
#: preseed.xml:1020
#, no-c-format
msgid ""
"Normally, filesystems are mounted using a universally unique identifier "
"(UUID) as a key; this allows them to be mounted properly even if their "
"device name changes. UUIDs are long and difficult to read, so, if you "
"prefer, the installer can mount filesystems based on the traditional device "
"names, or based on a label you assign. If you ask the installer to mount by "
"label, any filesystems without a label will be mounted using a UUID instead."
msgstr ""

#. Tag: para
#: preseed.xml:1029
#, no-c-format
msgid ""
"Devices with stable names, such as LVM logical volumes, will continue to use "
"their traditional names rather than UUIDs."
msgstr ""
"Enheder med stabile navne, såsom LVM logiske diskenehder, vil fortsætte med "
"at bruge deres traditionelle navne frem for UUID'er."

#. Tag: para
#: preseed.xml:1036
#, no-c-format
msgid ""
"Traditional device names may change based on the order in which the kernel "
"discovers devices at boot, which may cause the wrong filesystem to be "
"mounted. Similarly, labels are likely to clash if you plug in a new disk or "
"a USB drive, and if that happens your system's behaviour when started will "
"be random."
msgstr ""
"Traditionelle enhedsnavne kan ændre sig baseret på rækkefølgen hvormed "
"kernen registrerer enheder ved opstart, hvilket kan medføre at det forkerte "
"filsystem monteres. Tilsvarende vil etikettter ramle sammen, hvis vi "
"tilslutter en ny disk eller et USB-drev og hvis det sker, vil dit systems "
"opførsel, når startet, være tilfældigt."

#. Tag: screen
#: preseed.xml:1046
#, no-c-format
msgid ""
"# The default is to mount by UUID, but you can also choose \"traditional\" "
"to\n"
"# use traditional device names, or \"label\" to try filesystem labels "
"before\n"
"# falling back to UUIDs.\n"
"#d-i partman/mount_style select uuid"
msgstr ""
"# Standarden er at montere efter UUID, men du kan også vælge »traditional«\n"
"# brug traditionelle enhedsnavne, eller »label« for at prøve "
"filsystemetiketter\n"
"# af før der faldes tilbage til UUID'er.\n"
"#d-i partman/mount_style select uuid"

#. Tag: title
#: preseed.xml:1052
#, no-c-format
msgid "Base system installation"
msgstr "Installation af det grundlæggende system"

#. Tag: para
#: preseed.xml:1053
#, no-c-format
msgid ""
"There is actually not very much that can be preseeded for this stage of the "
"installation. The only questions asked concern the installation of the "
"kernel."
msgstr ""
"Der er faktisk ikke meget som kan forhåndskonfigureres på dette trin af "
"installationen. De eneste spørgsmål, der stilles, vedrører installationen af "
"kernen."

#. Tag: screen
#: preseed.xml:1060
#, no-c-format
msgid ""
"# Configure APT to not install recommended packages by default. Use of this\n"
"# option can result in an incomplete system and should only be used by very\n"
"# experienced users.\n"
"#d-i base-installer/install-recommends boolean false\n"
"\n"
"# The kernel image (meta) package to be installed; \"none\" can be used if "
"no\n"
"# kernel is to be installed.\n"
"#d-i base-installer/kernel/image string &kernelpackage;-686"
msgstr ""
"# Konfigurer APT til ikke at installere anbefalede pakker som standard. "
"Brug\n"
"# af denne indstilling medføre et ufuldstændigt system og bør kun bruges af\n"
"# meget erfarne brugere.\n"
"#d-i base-installer/install-recommends boolean false\n"
"\n"
"# (Meta)pakken for kerneaftryk at installere; »none« kan bruges hvis ingen\n"
"# kerne skal installeres.\n"
"#d-i base-installer/kernel/image string &kernelpackage;-686"

#. Tag: title
#: preseed.xml:1065
#, no-c-format
msgid "Apt setup"
msgstr "Apt-opsætning"

#. Tag: para
#: preseed.xml:1066
#, no-c-format
msgid ""
"Setup of the <filename>/etc/apt/sources.list</filename> and basic "
"configuration options is fully automated based on your installation method "
"and answers to earlier questions. You can optionally add other (local) "
"repositories."
msgstr ""
"Opsætning af <filename>/etc/apt/sources.list</filename> og grundlæggende "
"konfigurationsindstillinger er fuldt automatiseret baseret på din "
"installationsmetode og svarer til tidligere spørgsmål. Du kan valgfrit "
"tilføje andre (lokale) arkiver."

#. Tag: screen
#: preseed.xml:1074
#, fuzzy, no-c-format
#| msgid ""
#| "# You can choose to install non-free and contrib software.\n"
#| "#d-i apt-setup/non-free boolean true\n"
#| "#d-i apt-setup/contrib boolean true\n"
#| "# Uncomment this if you don't want to use a network mirror.\n"
#| "#d-i apt-setup/use_mirror boolean false\n"
#| "# Select which update services to use; define the mirrors to be used.\n"
#| "# Values shown below are the normal defaults.\n"
#| "#d-i apt-setup/services-select multiselect security, updates\n"
#| "#d-i apt-setup/security_host string security.debian.org\n"
#| "\n"
#| "# Additional repositories, local[0-9] available\n"
#| "#d-i apt-setup/local0/repository string \\\n"
#| "#       http://local.server/debian stable main\n"
#| "#d-i apt-setup/local0/comment string local server\n"
#| "# Enable deb-src lines\n"
#| "#d-i apt-setup/local0/source boolean true\n"
#| "# URL to the public key of the local repository; you must provide a key "
#| "or\n"
#| "# apt will complain about the unauthenticated repository and so the\n"
#| "# sources.list line will be left commented out\n"
#| "#d-i apt-setup/local0/key string http://local.server/key\n"
#| "\n"
#| "# By default the installer requires that repositories be authenticated\n"
#| "# using a known gpg key. This setting can be used to disable that\n"
#| "# authentication. Warning: Insecure, not recommended.\n"
#| "#d-i debian-installer/allow_unauthenticated boolean true\n"
#| "\n"
#| "# Uncomment this to add multiarch configuration for i386\n"
#| "#d-i apt-setup/multiarch string i386"
msgid ""
"# Choose, if you want to scan additional installation media\n"
"# (default: false).\n"
"d-i apt-setup/cdrom/set-first boolean false\n"
"# You can choose to install non-free and contrib software.\n"
"#d-i apt-setup/non-free boolean true\n"
"#d-i apt-setup/contrib boolean true\n"
"# Uncomment this if you don't want to use a network mirror.\n"
"#d-i apt-setup/use_mirror boolean false\n"
"# Select which update services to use; define the mirrors to be used.\n"
"# Values shown below are the normal defaults.\n"
"#d-i apt-setup/services-select multiselect security, updates\n"
"#d-i apt-setup/security_host string security.debian.org\n"
"\n"
"# Additional repositories, local[0-9] available\n"
"#d-i apt-setup/local0/repository string \\\n"
"#       http://local.server/debian stable main\n"
"#d-i apt-setup/local0/comment string local server\n"
"# Enable deb-src lines\n"
"#d-i apt-setup/local0/source boolean true\n"
"# URL to the public key of the local repository; you must provide a key or\n"
"# apt will complain about the unauthenticated repository and so the\n"
"# sources.list line will be left commented out.\n"
"#d-i apt-setup/local0/key string http://local.server/key\n"
"# If the provided key file ends in \".asc\" the key file needs to be an\n"
"# ASCII-armoured PGP key, if it ends in \".gpg\" it needs to use the\n"
"# \"GPG key public keyring\" format, the \"keybox database\" format is\n"
"# currently not supported.\n"
"\n"
"# By default the installer requires that repositories be authenticated\n"
"# using a known gpg key. This setting can be used to disable that\n"
"# authentication. Warning: Insecure, not recommended.\n"
"#d-i debian-installer/allow_unauthenticated boolean true\n"
"\n"
"# Uncomment this to add multiarch configuration for i386\n"
"#d-i apt-setup/multiarch string i386"
msgstr ""
"# Du kan vælge at installere programmer fra non-free og contrib.\n"
"#d-i apt-setup/non-free boolean true\n"
"#d-i apt-setup/contrib boolean true\n"
"# Fjern udkommentering hvis du ikke ønsker at bruge et netværksspejl.\n"
"#d-i apt-setup/use_mirror boolean false\n"
"# Vælg opdateringstjenesten; definer spejlene.\n"
"# Værdier vist nedenfor er de normale standarder.\n"
"#d-i apt-setup/services-select multiselect security, updates\n"
"#d-i apt-setup/security_host string security.debian.org\n"
"\n"
"# Yderligere arkiver, local[0-9] tilgængelig\n"
"#d-i apt-setup/local0/repository string \\\n"
"#       http://local.server/debian stable main\n"
"#d-i apt-setup/local0/comment string local server\n"
"# Aktiver deb-src-linjer\n"
"#d-i apt-setup/local0/source boolean true\n"
"# Adresse til den offentlige nøgle for det lokale arkiv; du skal angive en\n"
"# ellers vil apt beklage sig over et arkiv uden godkendelse og så vil\n"
"# linjen sources.list blive efterladt udkommenteret\n"
"#d-i apt-setup/local0/key string http://local.server/key\n"
"\n"
"# Som standard kræver installationsprogrammet at arkiverne godkendes\n"
"# via en kendt gpg-nøgle. Denne indstilling kan bruges til at deaktivere "
"den\n"
"# godkendelse. Advarsel: Usikker, anbefales ikke.\n"
"#d-i debian-installer/allow_unauthenticated boolean true\n"
"\n"
"# Fjern # for at tilføje flerarkitekturkonfiguration for i386\n"
"#d-i apt-setup/multiarch string i386"

#. Tag: title
#: preseed.xml:1079
#, no-c-format
msgid "Package selection"
msgstr "Pakkevalg"

#. Tag: para
#: preseed.xml:1080
#, no-c-format
msgid ""
"You can choose to install any combination of tasks that are available. "
"Available tasks as of this writing include:"
msgstr ""
"Du kan vælge at installere enhver kombination af opgaver, som er "
"tilgængelige. Tilgængelige opgaver, da dette skrives, inkluderer:"

#. Tag: para
#: preseed.xml:1088
#, no-c-format
msgid "<userinput>standard</userinput> (standard tools)"
msgstr "<userinput>standard</userinput> (standardværktøjer)"

#. Tag: para
#: preseed.xml:1091
#, no-c-format
msgid "<userinput>desktop</userinput> (graphical desktop)"
msgstr "<userinput>desktop</userinput> (grafisk skrivebord)"

#. Tag: para
#: preseed.xml:1094
#, no-c-format
msgid "<userinput>gnome-desktop</userinput> (Gnome desktop)"
msgstr "<userinput>gnome-desktop</userinput> (GNOME-skrivebord)"

#. Tag: para
#: preseed.xml:1097
#, no-c-format
msgid "<userinput>xfce-desktop</userinput> (XFCE desktop)"
msgstr "<userinput>xfce-desktop</userinput> (XFCE-skrivebord)"

#. Tag: para
#: preseed.xml:1100
#, no-c-format
msgid "<userinput>kde-desktop</userinput> (KDE Plasma desktop)"
msgstr "<userinput>kde-desktop</userinput> (KDE Plasma-skrivebord)"

#. Tag: para
#: preseed.xml:1103
#, no-c-format
msgid "<userinput>cinnamon-desktop</userinput> (Cinnamon desktop)"
msgstr "<userinput>cinnamon-desktop</userinput> (Cinnamonskrivebord)"

#. Tag: para
#: preseed.xml:1106
#, no-c-format
msgid "<userinput>mate-desktop</userinput> (MATE desktop)"
msgstr "<userinput>mate-desktop</userinput> (MATE-skrivebord)"

#. Tag: para
#: preseed.xml:1109
#, no-c-format
msgid "<userinput>lxde-desktop</userinput> (LXDE desktop)"
msgstr "<userinput>lxde-desktop</userinput> (LXDE-skrivebord)"

#. Tag: para
#: preseed.xml:1112
#, no-c-format
msgid "<userinput>web-server</userinput> (web server)"
msgstr "<userinput>web-server</userinput> (netserver)"

#. Tag: para
#: preseed.xml:1115
#, no-c-format
msgid "<userinput>ssh-server</userinput> (SSH server)"
msgstr "<userinput>ssh-server</userinput> (SSH-server)"

#. Tag: para
#: preseed.xml:1120
#, no-c-format
msgid ""
"You can also choose to install no tasks, and force the installation of a set "
"of packages in some other way. We recommend always including the "
"<userinput>standard</userinput> task."
msgstr ""
"Du kan også vælge ikke at installere opgaver og tvinge installationen af et "
"sæt af pakke igennem på en anden måde. Vi anbefaler altid inkludering af "
"<userinput>standardopgaven</userinput>."

#. Tag: para
#: preseed.xml:1126
#, no-c-format
msgid ""
"Or if you don't want the tasksel dialog to be shown at all, preseed "
"<classname>pkgsel/run_tasksel</classname> (no packages are installed via "
"tasksel in that case)."
msgstr ""

#. Tag: para
#: preseed.xml:1132
#, no-c-format
msgid ""
"If you want to install some individual packages in addition to packages "
"installed by tasks, you can use the parameter <classname>pkgsel/include</"
"classname>. The value of this parameter can be a list of packages separated "
"by either commas or spaces, which allows it to be used easily on the kernel "
"command line as well."
msgstr ""
"Hvis du ønsker at installere nogle individuelle pakker udover pakkerne "
"installeret af tasks, så kan du bruge parameteren <classname>pkgsel/include</"
"classname>. Værdien for denne parameter kan være en liste af pakker adskilt "
"af enten kommaer eller mellemrum, som gør at den kan nemt kan bruges på "
"kernes kommandolinje."

#. Tag: screen
#: preseed.xml:1142
#, no-c-format
msgid ""
"#tasksel tasksel/first multiselect standard, web-server, kde-desktop\n"
"\n"
"# Or choose to not get the tasksel dialog displayed at all (and don't "
"install\n"
"# any packages):\n"
"#d-i pkgsel/run_tasksel boolean false\n"
"\n"
"# Individual additional packages to install\n"
"#d-i pkgsel/include string openssh-server build-essential\n"
"# Whether to upgrade packages after debootstrap.\n"
"# Allowed values: none, safe-upgrade, full-upgrade\n"
"#d-i pkgsel/upgrade select none\n"
"\n"
"# You can choose, if your system will report back on what software you have\n"
"# installed, and what software you use. The default is not to report back,\n"
"# but sending reports helps the project determine what software is most\n"
"# popular and should be included on the first CD/DVD.\n"
"#popularity-contest popularity-contest/participate boolean false"
msgstr ""

#. Tag: title
#: preseed.xml:1147
#, no-c-format
msgid "Boot loader installation"
msgstr "Installation af opstartsindlæseren"

#. Tag: screen
#: preseed.xml:1149
#, no-c-format
msgid ""
"<phrase arch=\"linux-any\"># Grub is the boot loader (for x86).</"
"phrase><phrase\n"
"arch=\"kfreebsd-any;hurd-any\"># To install no bootloader, uncomment this\n"
"#d-i grub-installer/skip boolean true</phrase>\n"
"\n"
"# This is fairly safe to set, it makes grub install automatically to the "
"UEFI\n"
"# partition/boot record if no other operating system is detected on the "
"machine.\n"
"d-i grub-installer/only_debian boolean true\n"
"\n"
"# This one makes grub-installer install to the UEFI partition/boot record, "
"if\n"
"# it also finds some other OS, which is less safe as it might not be able "
"to\n"
"# boot that other OS.\n"
"d-i grub-installer/with_other_os boolean true\n"
"\n"
"# Due notably to potential USB sticks, the location of the primary drive "
"can\n"
"# not be determined safely in general, so this needs to be specified:\n"
"#d-i grub-installer/bootdev  string /dev/sda\n"
"# To install to the primary device (assuming it is not a USB stick):\n"
"#d-i grub-installer/bootdev  string default\n"
"\n"
"# Alternatively, if you want to install to a location other than the UEFI\n"
"# parition/boot record, uncomment and edit these lines:\n"
"#d-i grub-installer/only_debian boolean false\n"
"#d-i grub-installer/with_other_os boolean false\n"
"#d-i grub-installer/bootdev  string (hd0,1)\n"
"# To install grub to multiple disks:\n"
"#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)\n"
"\n"
"# Optional password for grub, either in clear text\n"
"#d-i grub-installer/password password r00tme\n"
"#d-i grub-installer/password-again password r00tme\n"
"# or encrypted using an MD5 hash, see grub-md5-crypt(8).\n"
"#d-i grub-installer/password-crypted password [MD5 hash]\n"
"\n"
"# Use the following option to add additional boot parameters for the\n"
"# installed system (if supported by the bootloader installer).\n"
"# Note: options passed to the installer will be added automatically.\n"
"#d-i debian-installer/add-kernel-opts string nousb"
msgstr ""

#. Tag: para
#: preseed.xml:1151
#, no-c-format
msgid ""
"An MD5 hash for a password for <classname>grub</classname> can be generated "
"using <command>grub-md5-crypt</command>, or using the command from the "
"example in <xref linkend=\"preseed-account\"/>."
msgstr ""
"En MD5-hash for en adgangskode til <classname>grub</classname> kan oprettes "
"via <command>grub-md5-crypt</command>, eller via kommandoen fra eksemplet i "
"<xref linkend=\"preseed-account\"/>."

#. Tag: title
#: preseed.xml:1161
#, no-c-format
msgid "Finishing up the installation"
msgstr "Afslutning af installationen"

#. Tag: screen
#: preseed.xml:1163
#, no-c-format
msgid ""
"# During installations from serial console, the regular virtual consoles\n"
"# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next\n"
"# line to prevent this.\n"
"#d-i finish-install/keep-consoles boolean true\n"
"\n"
"# Avoid that last message about the install being complete.\n"
"d-i finish-install/reboot_in_progress note\n"
"\n"
"# This will prevent the installer from ejecting the CD during the reboot,\n"
"# which is useful in some situations.\n"
"#d-i cdrom-detect/eject boolean false\n"
"\n"
"# This is how to make the installer shutdown when finished, but not\n"
"# reboot into the installed system.\n"
"#d-i debian-installer/exit/halt boolean true\n"
"# This will power off the machine instead of just halting it.\n"
"#d-i debian-installer/exit/poweroff boolean true"
msgstr ""
"# Under installationer fra seriel konsol, er den normale virtuelle konsol\n"
"# (VT1-VT6) normalt deaktiveret i /etc/inittab. Aktiver den næste linje for\n"
"# at forhindre dette.\n"
"#d-i finish-install/keep-consoles boolean true\n"
"\n"
"# Undgå den sidste besked om at installationen er færdig.\n"
"d-i finish-install/reboot_in_progress note\n"
"\n"
"# Dette vil forhindre installationsprogrammet i at skubbe cd'en ud under\n"
"# genstarten, hvilket er nyttigt i nogle situationer.\n"
"#d-i cdrom-detect/eject boolean false\n"
"\n"
"# Sådan lukkes installationsprogrammet ned, når det er færdigt, men undgår\n"
"# at genstarte i det installerede system.\n"
"#d-i debian-installer/exit/halt boolean true\n"
"# Dette vil slukke for strømmen i stedet for bare at stoppe det.\n"
"#d-i debian-installer/exit/poweroff boolean true"

#. Tag: title
#: preseed.xml:1168
#, no-c-format
msgid "Preseeding other packages"
msgstr "Forhåndskonfiguration af andre pakker"

#. Tag: screen
#: preseed.xml:1170
#, no-c-format
msgid ""
"# Depending on what software you choose to install, or if things go wrong\n"
"# during the installation process, it's possible that other questions may\n"
"# be asked. You can preseed those too, of course. To get a list of every\n"
"# possible question that could be asked during an install, do an\n"
"# installation, and then run these commands:\n"
"#   debconf-get-selections --installer &gt; file\n"
"#   debconf-get-selections &gt;&gt; file"
msgstr ""
"# Afhængig af hvilke programmer du vælger at installere, eller hvis noget\n"
"# går galt under installationsprocessen, så er det muligt at andre "
"spørgsmål\n"
"# kan stilles. Du kan selvfølgelig også forhåndskonfigurere disse. For en "
"liste\n"
"# over alle de mulige spørgsmål, der kan stilles under en installation, "
"udføres\n"
"# en installation, og disse kommandoer afvikles:\n"
"#   debconf-get-selections --installer &gt; file\n"
"#   debconf-get-selections &gt;&gt; file"

#. Tag: title
#: preseed.xml:1177
#, no-c-format
msgid "Advanced options"
msgstr "Avancerede indstillinger"

#. Tag: title
#: preseed.xml:1180
#, no-c-format
msgid "Running custom commands during the installation"
msgstr "Kørsel af tilpassede kommandoer under installationen"

#. Tag: para
#: preseed.xml:1181
#, no-c-format
msgid ""
"A very powerful and flexible option offered by the preconfiguration tools is "
"the ability to run commands or scripts at certain points in the installation."
msgstr ""
"En meget funktionsrig og fleksibel valgmulighed tilbudt af værktøjerne til "
"forhåndskonfiguration er muligheden for at afvikle kommandoer eller skripter "
"på bestemte steder under installationen."

#. Tag: para
#: preseed.xml:1187
#, no-c-format
msgid ""
"When the filesystem of the target system is mounted, it is available in "
"<filename>/target</filename>. If an installation CD is used, when it is "
"mounted it is available in <filename>/cdrom</filename>."
msgstr ""
"Når filsystemet for målsystemet er monteret, så er det tilgængelig i "
"<filename>/target</filename>. Hvis en installation-cd bruges, når den er "
"monteret, er den tilgængelig under <filename>/cdrom</filename>."

#. Tag: screen
#: preseed.xml:1195
#, no-c-format
msgid ""
"# d-i preseeding is inherently not secure. Nothing in the installer checks\n"
"# for attempts at buffer overflows or other exploits of the values of a\n"
"# preconfiguration file like this one. Only use preconfiguration files from\n"
"# trusted locations! To drive that home, and because it's generally useful,\n"
"# here's a way to run any shell command you'd like inside the installer,\n"
"# automatically.\n"
"\n"
"# This first command is run as early as possible, just after\n"
"# preseeding is read.\n"
"#d-i preseed/early_command string anna-install some-udeb\n"
"# This command is run immediately before the partitioner starts. It may be\n"
"# useful to apply dynamic partitioner preseeding that depends on the state\n"
"# of the disks (which may not be visible when preseed/early_command runs).\n"
"#d-i partman/early_command \\\n"
"#       string debconf-set partman-auto/disk \"$(list-devices disk | head -"
"n1)\"\n"
"# This command is run just before the install finishes, but when there is\n"
"# still a usable /target directory. You can chroot to /target and use it\n"
"# directly, or use the apt-install and in-target commands to easily install\n"
"# packages and run commands in the target system.\n"
"#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh"
msgstr ""

#. Tag: title
#: preseed.xml:1200
#, no-c-format
msgid "Using preseeding to change default values"
msgstr "Brug af forhåndskonfiguration til at ændre standardværdier"

#. Tag: para
#: preseed.xml:1201
#, no-c-format
msgid ""
"It is possible to use preseeding to change the default answer for a "
"question, but still have the question asked. To do this the <firstterm>seen</"
"firstterm> flag must be reset to <quote>false</quote> after setting the "
"value for a question. <informalexample><screen>\n"
"d-i foo/bar string value\n"
"d-i foo/bar seen false\n"
"</screen></informalexample> The same effect can be achieved for "
"<emphasis>all</emphasis> questions by setting the parameter "
"<classname>preseed/interactive=true</classname> at the boot prompt. This can "
"also be useful for testing or debugging your preconfiguration file."
msgstr ""

#. Tag: para
#: preseed.xml:1215
#, no-c-format
msgid ""
"Note that the <quote>d-i</quote> owner should only be used for variables "
"used in the installer itself. For variables belonging to packages installed "
"on the target system, you should use the name of that package instead. See "
"the footnote to <xref linkend=\"preseed-bootparms\"/>."
msgstr ""

#. Tag: para
#: preseed.xml:1222
#, no-c-format
msgid ""
"If you are preseeding using boot parameters, you can make the installer ask "
"the corresponding question by using the <quote>?=</quote> operator, i.e. "
"<userinput><replaceable>foo</replaceable>/<replaceable>bar</replaceable>?"
"=<replaceable>value</replaceable></userinput> (or "
"<userinput><replaceable>owner</replaceable>:<replaceable>foo/bar</"
"replaceable>?=<replaceable>value</replaceable></userinput>). This will of "
"course only have effect for parameters that correspond to questions that are "
"actually displayed during an installation and not for <quote>internal</"
"quote> parameters."
msgstr ""

#. Tag: para
#: preseed.xml:1232
#, no-c-format
msgid ""
"For more debugging information, use the boot parameter "
"<classname>DEBCONF_DEBUG=5</classname>. This will cause <classname>debconf</"
"classname> to print much more detail about the current settings of each "
"variable and about its progress through each package's installation scripts."
msgstr ""
"For yderligere fejlsøgningsinformation bruges opstarstparameteren "
"<classname>DEBCONF_DEBUG=5</classname>. Dette vil medføre at "
"<classname>debconf</classname> udskriver langt flere detaljer om den "
"nuværende opsætning af hver variabel og om dens status igennem hver pakkes "
"installationsskripter."

#. Tag: title
#: preseed.xml:1244
#, no-c-format
msgid "Chainloading preconfiguration files"
msgstr "Kædeindlæsning af forhåndskonfigurerede filer"

#. Tag: para
#: preseed.xml:1245
#, no-c-format
msgid ""
"It is possible to include other preconfiguration files from a "
"preconfiguration file. Any settings in those files will override pre-"
"existing settings from files loaded earlier. This makes it possible to put, "
"for example, general networking settings for your location in one file and "
"more specific settings for certain configurations in other files."
msgstr ""
"Det er muligt at inkludere andre forhåndskonfigurationsfiler fra en "
"forhåndskonfigurationsfil. Enhver indstilling i disse filer vil overskrive "
"eksisterende indstillinger fra filer indlæst tidligere. Dette gør det muligt "
"at placere, for eksempel, generelle netværksindstililnger for din placering "
"i en fil og mere specifikke indstillinger for bestemte konfigurationer i "
"andre filer."

#. Tag: screen
#: preseed.xml:1255
#, no-c-format
msgid ""
"# More than one file can be listed, separated by spaces; all will be\n"
"# loaded. The included files can have preseed/include directives of their\n"
"# own as well. Note that if the filenames are relative, they are taken from\n"
"# the same directory as the preconfiguration file that includes them.\n"
"#d-i preseed/include string x.cfg\n"
"\n"
"# The installer can optionally verify checksums of preconfiguration files\n"
"# before using them. Currently only md5sums are supported, list the md5sums\n"
"# in the same order as the list of files to include.\n"
"#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n"
"\n"
"# More flexibly, this runs a shell command and if it outputs the names of\n"
"# preconfiguration files, includes those files. \n"
"#d-i preseed/include_command \\\n"
"#      string if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n"
"\n"
"# Most flexibly of all, this downloads a program and runs it. The program\n"
"# can use commands such as debconf-set to manipulate the debconf database.\n"
"# More than one script can be listed, separated by spaces.\n"
"# Note that if the filenames are relative, they are taken from the same\n"
"# directory as the preconfiguration file that runs them.\n"
"#d-i preseed/run string foo.sh"
msgstr ""
"# Mere end en fil kan angives, adskilt af mellemrum; alle vil blive\n"
"# indlæst. De inkluderede filer kan have egne preseed/include-direktiver.\n"
"# Bemærk at hvis filnavne er relative, så tages de fra den samme mappe\n"
"# som forhåndskonfigurationsfilen, som inkluderer dem.\n"
"#d-i preseed/include string x.cfg\n"
"\n"
"# Installationsprogrammet kan valgfrit verificere kontrolsummer for filer\n"
"# til forhåndskonfiguration. I øjeblikket er kun md5sums understøttet, "
"angiv\n"
"# md5sums i den samme rækkefølge som listen med filer til inklusion.\n"
"#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n"
"\n"
"# Mere fleksibelt, så afvikler dette en skalkommando og hvis den viser "
"navnene\n"
"# på forhåndskonfigurationsfiler, så inkluder disse filer.\n"
"#d-i preseed/include_command \\\n"
"#      string if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n"
"\n"
"# Mest fleksibelt, så hentes her et program der afvikles. Programmet\n"
"# kan bruge kommandoer såsom debconf-set til at manipulere debconf-"
"databasen.\n"
"# Mere end et skript kan angives, adskilt af mellemrum. Bemærk at hvis\n"
"# filnavnene er relative, så tages de fra den samme mappe som \n"
"# forhåndskonfigurationsfilen, som afvikler dem.\n"
"#d-i preseed/run string foo.sh"

#. Tag: para
#: preseed.xml:1257
#, no-c-format
msgid ""
"It is also possible to chainload from the initrd or file preseeding phase, "
"into network preseeding by setting preseed/url in the earlier files. This "
"will cause network preseeding to be performed when the network comes up. You "
"need to be careful when doing this, since there will be two distinct runs at "
"preseeding, meaning for example that you get another chance to run the "
"preseed/early command, the second one happening after the network comes up."
msgstr ""
"Det er også muligt at kædeindlæse (chainload) fra initrd- eller "
"filforhåndskonfigurationsfasen, til netværksforhåndskonfiguration ved at "
"angive preseed/url i de tidligere filer. Dette vil medføre at "
"netværksforhåndskonfiguration udføres når netværket startes op. Du skal være "
"omhyggelig når dette udføres, da der vil være to distinkte kørsler ved "
"forhåndskonfiguration, hvilket for eksempel betyder at du får en anden "
"chance for at afvikle kommandoen preseed/early, den den efter at netværket "
"er i gang."

#~ msgid "<userinput>print-server</userinput> (print server)"
#~ msgstr "<userinput>print-server</userinput> (printerserver)"

#~ msgid "floppy based (cd-drivers)"
#~ msgstr "diskettebaseret (cd-drivere)"

#~ msgid "floppy based (net-drivers)"
#~ msgstr "diskettebaseret (net-drivere)"