path: root/en/appendix/preseed.xml

<!-- retain these comments for translator revision tracking -->
<!-- $Id$ -->

<!--
Be carefull with the format of this file as it is parsed to generate
the example preconfiguration file.
In that file all text between <informalexample> tags that have the
attribute 'role="example"' set is included, except if a 'condition'
attribute is in force that does not match the specified release or if an
'arch' attribute is in force that does not match the specified architecture.

Currently only a single variant of the example file is generated (for i386).
-->

<appendix id="appendix-preseed">
<title>Automating the installation using preseeding</title>

<para>

This appendix explains the intricacies of preseeding answers to questions in
&d-i; to automate your installation.

</para><para>

The configuration fragments used in this appendix are also available as an
example preconfiguration file from &urlset-example-preseed;.

</para>

 <sect1 id="preseed-intro">
 <title>Introduction</title>
<para>

Preseeding provides a way to set answers to questions asked during the
installation process, without having to manually enter the answers while
the installation is running. This makes it possible to fully automate most
types of installation and even offers some features not available during
normal installations.

</para>

  <sect2 id="preseed-methods">
  <title>Preseeding methods</title>
<para>

There are three methods that can be used for preseeding:
<firstterm>initrd</firstterm>, <firstterm>file</firstterm> and
<firstterm>network</firstterm>. Initrd preseeding will work with any
installation method and supports preseeding of more things, but it requires
the most preparation. File and network preseeding each can be used with
different installation methods. With file and network preseeding the first
few installer questions cannot be preseeded because the preconfiguration
file is only loaded after they have been asked.

</para><para>

The following table shows which preseeding methods can be used with which
installation methods.

<informaltable>
<tgroup cols="4">
<thead>
<row>
  <entry>Installation method</entry><entry>initrd</entry>
  <entry>file</entry><entry>network</entry>
</row>
</thead>

<tbody>
<row>
  <entry>CD/DVD</entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>no</entry>
</row><row>
  <entry>netboot</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row><row>
  <entry>hd-media <phrase condition="bootable-usb">(including usb-stick)</phrase></entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>no</entry>
</row><row condition="supports-floppy-boot">
  <entry>floppy based (cd-drivers)</entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>no</entry>
</row><row condition="supports-floppy-boot">
  <entry>floppy based (net-drivers)</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row><row arch="s390">
  <entry>generic/tape</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row>
</tbody>

</tgroup></informaltable>

</para><para>

An important difference between the preseeding methods is the point at which
the preconfiguration file is loaded and processed. For initrd preseeding
this is right at the start of the installation, before the first question is
even asked. For file preseeding this is after the CD or CD image has been
loaded. For network preseeding it is only after the network has been
configured.

</para><para>

In practical terms this means for file and network preseeding that the
questions about language, country and keyboard selection will already have
been asked. For network preseeding add to that any questions related to
network configuration. Some other questions that are only displayed
at medium or low priority (like the first hardware detection run) will
also already have been processed.

</para><para>

Obviously, any questions that have been processed before the
preconfiguration file is loaded cannot be preseeded.
<xref linkend="preseed-bootparms"/> offers a way to avoid these
questions being asked.

</para>
  </sect2>

  <sect2 id="preseed-limitations">
  <title>Limitations</title>
<para>

Although most questions used by &d-i; can be preseeded using this method,
there are some notable exceptions. You must (re)partition an entire disk
or use available free space on a disk; it is not possible to use existing
partitions. You currently cannot use preseeding to set up RAID.

</para>
  </sect2>

<!-- Joeyh feels this is too technical, so leave it out for now
  <sect2 id="preseed-debconf">
  <title>Debconf basics</title>
<para>

Preseeding makes use of the <classname>debconf</classname> framework. This
framework is the preferred mechanism used in Debian to interact with the user
when configuring packages and also forms the heart of &d-i;.
In the <classname>debconf</classname> framework questions or dialogs are
based on <firstterm>templates</firstterm>. There are different types of
templates for different types of questions. The actual questions are
<quote>generated</quote> from templates at runtime;  multiple questions can
use the same template.

</para><para>

The following types of templates are relevant for preseeding.

</para>

<itemizedlist>
<listitem><para>
  string: allows the user to type any value
</para></listitem>
<listitem><para>
  password: similar to string but the value typed is not displayed
</para></listitem>
<listitem><para>
  boolean: for yes/no or true/false type of questions
</para></listitem>
<listitem><para>
  select: allows the user to select one option from a list
</para></listitem>
<listitem><para>
  multiselect: allows the user to select zero, one or more options from a list
</para></listitem>
<listitem><para>
  note: used to display a message
</para></listitem>
</itemizedlist>

<para>

In &d-i; templates are stored in a readable file
<filename>/var/cache/debconf/templates.dat</filename>. This file contains all fixed
text and all translations. It can also contain a default value for the
template. The fixed text can include variables that will be replaced at
runtime.

</para><para>

Another readable file <filename>/var/cache/debconf/questions.dat</filename>
is used to store the values for variables and the answers given to questions.
A question always refers to the template used to ask it. For obvious
security reasons the values for questions of type <quote>password</quote>
are stored in a separate, non-readable file in the same directory.

</para>
  </sect2>
-->

  <sect2 id="preseed-hooks">
  <title>Running custom commands during the installation</title>
<para>

A very powerful and flexible option offered by the preconfiguration tools
is the ability to run commands or scripts at certain points in the
installation. See <xref linkend="preseed-shell"/> for details.

</para>

<itemizedlist>
<listitem><para>
  <userinput>preseed/early_command</userinput>: is run as soon as the
  preconfiguration file has been loaded
</para></listitem>
<listitem><para>
  <userinput>preseed/late_command</userinput>: is run just before the reboot
  at the end of the install, but before the <filename>/target</filename>
  filesystem has been unmounted
</para></listitem>
</itemizedlist>

  </sect2>

  <sect2 id="preseed-seenflag">
  <title>Using preseeding to change default values</title>
<para>

It is possible to use preseeding to change the default answer for a
question, but still have the question asked. To do this the
<firstterm>seen</firstterm> flag must be reset to <quote>false</quote> after
setting the value for a question.

</para>

<informalexample><screen>
d-i foo/bar string value
d-i foo/bar seen false
</screen></informalexample>

  </sect2>
 </sect1>

 <sect1 id="preseed-using">
 <title>Using preseeding</title>
<para>

Of course you will first need to create a preconfiguration file and place it in
the location from where you want to use it. Creating the preconfiguration file
is covered later in this appendix. Putting it in the correct location is fairly
straightforward for network preseeding or if you want to read the file off
a floppy or usb-stick. If you want to include the file on a CD or DVD, you
will have to remaster the ISO image. How to get the preconfiguration file
included in the initrd is outside the scope of this document; please consult
the developers documentation for &d-i;.

</para><para>

An example preconfiguration file that you can use as basis for your own
preconfiguration file is available from &urlset-example-preseed;. This file is
based on the configuration fragments included in this appendix.

</para>

  <sect2 id="preseed-loading">
  <title>Loading the preconfiguration file</title>
<para>

If you are using initrd preseeding, you only have to make sure a file named
<filename>preseed.cfg</filename> is included in the root directory of the
initrd. The installer will automatically check if this file is present and
load it.

</para><para>

For the other preseeding methods you need to tell the installer what file
to use when you boot it. This is normally done by passing the kernel a boot
parameter, either manually at boot time or by editing the bootloader
configuration file (e.g. <filename>syslinux.cfg</filename>) and adding the
parameter to the end of the append line(s) for the kernel.

</para><para>

If you do specify the preconfiguration file in the bootloader configuration,
you might change the configuration so you don't need to hit enter to boot the
installer. For syslinux this means setting the timeout to <literal>1</literal>
in <filename>syslinux.cfg</filename>.

</para><para>

To make sure the installer gets the right preconfiguration file, you can
optionally specify a checksum for the file. Currently this needs to be a
md5sum, and if specified it must match the preconfiguration file or the
installer will refuse to use it.

</para>

<informalexample><screen>
Boot parameters to specify:
- if you're netbooting:
  preseed/url=http://host/path/to/preseed.cfg
  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d

- if you're booting a remastered CD:
  preseed/file=/cdrom/preseed.cfg
  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d

- if you're installing from USB media (put the preconfiguration file in the
  toplevel directory of the USB stick):
  preseed/file=/hd-media/preseed.cfg
  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d
</screen></informalexample>

<para>

Note that <filename>preseed/url</filename> can be shortened to just
<filename>url</filename> and <filename>preseed/file</filename> to just
<filename>file</filename> when they are passed as boot parameters.

</para><para>

While you're at it, you may want to add a boot parameter
<userinput>priority=critical</userinput>. This will avoid most
questions even if the preseeding below misses some.

</para>
  </sect2>
  
  <sect2 id="preseed-dhcp">
  <title>Using a DHCP server to specify preconfiguration files</title>
<para>

It's also possible to use DHCP to specify a preconfiguration file to download
from the network. DHCP allows specifying a filename. Normally this is a file
to netboot, but if it appears to be an URL then installation media that
support network preseeding will download the file from the URL and use it as a
preconfiguration file. Here is an example of how to set it up in the dhcpd.conf
for version 3 of the ISC DHCP server (the dhcp3-server Debian package).

</para>

<informalexample><screen>
if substring (option vendor-class-identifier, 0, 3) = "d-i" {
    filename "http://host/preseed.cfg";
}
</screen></informalexample>

<para>

Note that the above example limits this filename to DHCP clients that identify
themselves as "d-i", so it will not affect regular DHCP clients, but only
the installer. You can also put the text in a stanza for only one particular
host to avoid preseeding all installs on your network.

</para><para>

A good way to use the DHCP preseeding is to only preseed values specific to
your network, such as the Debian mirror to use. This way installs on your
network will automatically get a good mirror selected, but the rest of the
installation can be performed interactively. Using DHCP preseeding to fully
automate Debian installs should only be done with care.

</para>
  </sect2>

  <sect2 id="preseed-bootparms">
  <title>Using boot parameters to supplement preseeding</title>
<para>

Some parts of the installation process cannot be automated using some forms
of preseeding because the questions are asked before the preconfiguration
file is loaded. For example, if the preconfiguration file is downloaded over
the network, the network setup must be done first. One reason to use initrd
preseeding is that it allows preseeding of even these early steps of the
installation process.

</para><para>

If a preconfiguration file cannot be used to preseed some steps, the install
can still be fully automated, since you can pass preseed values to the kernel
on the command line. Just pass <userinput>path/to/var=value</userinput>
for any of the preseed variables listed in the examples.

</para><para>

Note that some variables that are frequently set at the boot prompt have a
shorter alias. If an alias is available, it is used in the examples in
this appendix instead of the full variable.

</para><para>

A <quote>--</quote> in the boot options has special meaning.
Kernel parameters that appear after it will be copied into the installed
bootloader configuration (if supported by the installer for the
bootloader). Note that the <quote>--</quote> may already be
present in the default boot parameters.

</para>
<note><para>

The 2.4 kernel accepts a maximum of 8 command line options and
8 environment options (including any options added by default for the
installer). If these numbers are exceeded, 2.4 kernels will drop any
excess options and 2.6 kernels will panic. For kernel 2.6.9 and later,
you can use 32 command line options and 32 environment options.

</para></note>
<para>

For most installations some of the default options in your bootloader
configuration file, like <literal>vga=normal</literal>, may be safely
removed which may allow you to add more options for preseeding.

</para>
<note><para>

It may not always be possible to specify values with spaces for boot
parameters, even if you delimit them with quotes.

</para></note>
  </sect2>
 </sect1>

 <sect1 id="preseed-creating">
 <title>Creating a preconfiguration file</title>
<para>

The preconfiguration file is in the format used by the
<command>debconf-set-selections</command> command. The general format of
a line in a preconfiguration file is:

<informalexample><screen>
&lt;owner&gt; &lt;question name&gt; &lt;question type&gt; &lt;value&gt;
</screen></informalexample>

</para><para>

There are a few rules to keep in mind when writing a preconfiguration file.

</para>

<itemizedlist>
<listitem><para>
  Put only a single space or tab between type and value: any additional
  whitespace will be interpreted as belonging to the value.
</para></listitem>
<listitem><para>
  A line can be split into multiple lines by appending a backslash
  (<quote><literal>\</literal></quote>) as the line continuation character.
  A good place to split a line is after the question name; a bad place is
  between type and value.
</para></listitem>
<listitem><para>
  Most questions need to be preseeded using the values valid in English and
  not the translated values. However, there are some questions (for example
  in <classname>partman</classname>) where the translated values need to be
  used.
</para></listitem>
<listitem><para>
  Some questions take a code as value instead of the English text that is
  shown during installation.
</para></listitem>
</itemizedlist>

<para>

The easiest way to create a preconfiguration file is to use the example file
linked in <xref linkend="preseed-contents"/> as basis and work from there.

</para><para>

An alternative method is to do a manual installation and then, after
rebooting, use the <command>debconf-get-selections</command> from the
<classname>debconf-utils</classname> package to dump both the debconf
database and the installer's cdebconf database to a single file:

<informalexample><screen>
$ debconf-get-selections --installer &gt; <replaceable>file</replaceable>
$ debconf-get-selections &gt;&gt; <replaceable>file</replaceable>
</screen></informalexample>

</para><para>

However, a file generated in this manner will have some items that should
not be preseeded, and the example file is a better starting place for most
users.

</para>

<note><para>

This method relies on the fact that, at the end of the installation, the
installer's cdebconf database is saved to the installed system in
<filename>/var/log/installer/cdebconf</filename>. However, because the
database may contain sensitive information, by default the files are only
readable by root.

</para><para>

The directory <filename>/var/log/installer</filename> and all files in it
will be deleted from your system if you purge the package
<classname>installation-report</classname>.

</para></note>

<para>

To check possible values for questions, you can use <command>nano</command>
to examine the files in <filename>/var/lib/cdebconf</filename> while an
installation is in progress. View <filename>templates.dat</filename> for
the raw templates and <filename>questions.dat</filename> for the current
values and for the values assigned to variables.

</para><para>

To check if the format of your preconfiguration file is valid before performing
an install, you can use the command <command>debconf-set-selections -c
<replaceable>preseed.cfg</replaceable></command>.

</para>
 </sect1>

 <sect1 id="preseed-contents">
 <title>Contents of the preconfiguration file</title>
<para>

The configuration fragments used in this appendix are also available as an
example preconfiguration file from &urlset-example-preseed;.

</para><para>

Note that this example is based on an installation for the Intel x86
architecture. If you are installing a different architecture, some of the
examples (like keyboard selection and bootloader installation) may not be
relevant and will need to be replaced by debconf settings appropriate for
your architecture.

</para>
 
  <sect2 id="preseed-l10n">
  <title>Localization</title>
<para>

Setting localization values will only work if you are using initrd preseeding.
With all other methods the preconfiguration file will only be loaded after
these questions have been asked.

</para><para>

The locale can be used to specify both language and country.
To specify the locale as a boot parameter, use
<userinput>locale=<replaceable>en_US</replaceable></userinput>.

<informalexample role="example"><screen>
# Locale sets language and country.
d-i debian-installer/locale string en_US
</screen></informalexample>

</para><para>

Keyboard configuration consists of selecting a keyboard architecture and a
keymap. In most cases the correct keyboard architecture is selected by
default, so there's normally no need to preseed it. The keymap must
be valid for the selected  keyboard architecture.

<informalexample role="example"><screen>
# Keyboard selection.
#d-i console-tools/archs select at
d-i console-keymaps-at/keymap select us
# Example for a different keyboard architecture
#d-i console-keymaps-usb/keymap select mac-usb-us
</screen></informalexample>

</para><para>

To skip keyboard configuration, preseed
<classname>console-tools/archs</classname> with
<userinput>skip-config</userinput>.
This will result in the kernel keymap remaining active.

</para>

<note><para>

The changes in the input layer for 2.6 kernels have made the keyboard
architecture virtually obsolete. For 2.6 kernels normally a <quote>PC</quote>
(<userinput>at</userinput>) keymap should be selected.

</para></note>
  </sect2>

  <sect2 id="preseed-network">
  <title>Network configuration</title>
<para>

Of course, preseeding the network configuration won't work if you're
loading your preconfiguration file from the network. But it's great when
you're booting from CD or USB stick. If you are loading preconfiguration
files from the network, you can pass network config parameters by using
kernel boot parameters.

</para><para>

If you need to pick a particular interface when netbooting before loading
a preconfiguration file from the network, use a boot parameter such as
<userinput>interface=<replaceable>eth1</replaceable></userinput>.

</para><para>

Although preseeding the network configuration is normally not possible when
using network preseeding (using <quote>preseed/url</quote>), you can use
the following hack to work around that, for example if you'd like to set a
static address for the network interface. The hack is to force the network
configuration to run again after the preconfiguration file has been loaded
by creating a <quote>preseed/run</quote> script containing the following
lines:

<informalexample><screen>
killall.sh dhclient
netcfg
</screen></informalexample>

</para>

<informalexample role="example"><screen>
# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
d-i netcfg/choose_interface select auto

# To pick a particular interface instead:
#d-i netcfg/choose_interface select eth1

# If you have a slow dhcp server and the installer times out waiting for
# it, this might be useful.
#d-i netcfg/dhcp_timeout string 60

# If you prefer to configure the network manually, uncomment this line and
# the static network configuration below.
#d-i netcfg/disable_dhcp boolean true

# If you want the preconfiguration file to work on systems both with and
# without a dhcp server, uncomment these lines and the static network
# configuration below.
#d-i netcfg/dhcp_failed note
#d-i netcfg/dhcp_options select Configure network manually

# Static network configuration.
#d-i netcfg/get_nameservers string 192.168.1.1
#d-i netcfg/get_ipaddress string 192.168.1.42
#d-i netcfg/get_netmask string 255.255.255.0
#d-i netcfg/get_gateway string 192.168.1.1
#d-i netcfg/confirm_static boolean true

# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string unassigned-hostname
d-i netcfg/get_domain string unassigned-domain

# Disable that annoying WEP key dialog.
d-i netcfg/wireless_wep string
# The wacky dhcp hostname that some ISPs use as a password of sorts.
#d-i netcfg/dhcp_hostname string radish
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-mirror">
  <title>Mirror settings</title>
<para>

Depending on the installation method you use, a mirror may be used both to
download additional components of the installer, the base system and to
set up the <filename>/etc/apt/sources.list</filename> for the installed
system.

</para><para>

The parameter <classname>mirror/suite</classname> determines the suite for
the installed system.

</para><para>

The parameter <classname>mirror/udeb/suite</classname> determines the suite
for additional components for the installer. It is only useful to set this
if components are actually downloaded over the network and should match the
suite that was used to build the initrd for the installation method used for
the installation.
By default the value for <classname>mirror/udeb/suite</classname> is the
same as <classname>mirror/suite</classname>.

</para>

<informalexample role="example"><screen>
d-i mirror/country string enter information manually
d-i mirror/http/hostname string http.us.debian.org
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string

# Suite to install.
#d-i mirror/suite string testing
# Suite to use for loading installer components (optional).
#d-i mirror/udeb/suite string testing
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-partman">
  <title>Partitioning</title>
<para>

Using preseeding to partition the harddisk is very much limited to what is
supported by <classname>partman-auto</classname>. You can choose to either
partition existing free space on a disk or a whole disk. The layout of the
disk can be determined by using a predefined recipe, a custom recipe from
a recipe file or a recipe included in the preconfiguration file. It is
currently not possible to partition multiple disks using preseeding nor to
set up RAID.

</para>

<warning><para>

The identification of disks is dependent on the order in which their drivers
are loaded. If there are multiple disks in the system, make very sure the
correct one will be selected before using preseeding.

</para></warning>

<informalexample role="example"><screen>
# If the system has free space you can choose to only partition that space.
# Note: this must be preseeded with a localized (translated) value.
#d-i partman-auto/init_automatically_partition \
#      select Use the largest continuous free space

# Alternatively, you can specify a disk to partition. The device name
# can be given in either devfs or traditional non-devfs format.
# For example, to use the first disk:
d-i partman-auto/disk string /dev/discs/disc0/disc
# In addition, you'll need to specify the method to use.
# The presently available methods are: "regular", "lvm" and "crypto"
d-i partman-auto/method string lvm

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-auto/purge_lvm_from_device boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true

# You can choose from any of the predefined partitioning recipes.
# Note: this must be preseeded with a localized (translated) value.
d-i partman-auto/choose_recipe \
       select All files in one partition (recommended for new users)
#d-i partman-auto/choose_recipe \
#       select Separate /home partition
#d-i partman-auto/choose_recipe \
#       select Separate /home, /usr, /var, and /tmp partitions

# Or provide a recipe of your own...
# The recipe format is documented in the file devel/partman-auto-recipe.txt.
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# This makes partman automatically partition without confirmation.
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition \
       select Finish partitioning and write changes to disk
d-i partman/confirm boolean true
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-partman-raid">
  <title>Partitioning using RAID</title>
<para>

You can also use preseeding to set up partitions on software RAID arrays.
Supported are RAID levels 0, 1 and 5, creating degraded arrays and
specifying spare devices.
If you are using RAID 1, you can preseed grub to install to all devices
used in the array; see <xref linkend="preseed-bootloader"/>.

</para>

<warning><para>

This type of automated partitioning is easy to get wrong. It is also a
very new component that may still have some bugs or missing error
handling. The responsibility to get the various recipes right (so they
make sense and don't conflict) lies with the user.
Check <filename>/var/log/syslog</filename> if you run into problems.

</para><para>

Note that only RAID 0 and RAID 1 have been tested by the developers of the
component. RAID 5 is untested. Advanced RAID setup with degraded arrays or
spare devices has only been tested lightly.

</para></warning>

<informalexample><screen>
# NOTE: this option is of beta release quality and should be used carefully

# The method should be set to "raid".
#d-i partman-auto/method string raid
# Specify the disks to be partitioned. They will all get the same layout,
# so this will only work if the disks are the same size.
#d-i partman-auto/disk string /dev/discs/disc0/disc /dev/discs/disc1/disc

# Next you need to specify the physical partitions that will be used. 
#d-i partman-auto/expert_recipe string \
#      multiraid ::                                         \
#              1000 5000 4000 raid                          \
#                      $primary{ } method{ raid }           \
#              .                                            \
#              64 512 300% raid                             \
#                      method{ raid }                       \
#              .                                            \
#              500 10000 1000000000 raid                    \
#                      method{ raid }                       \
#              .

# Last you need to specify how the previously defined partitions will be
# used in the RAID setup. Remember to use the correct partition numbers
# for logical partitions.
# Parameters are:
# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
#          <devices> <sparedevices>
# RAID levels 0, 1 and 5 are supported; devices are separated using "#"
#d-i partman-auto-raid/recipe string \
#    1 2 0 ext3 /                                           \
#          /dev/discs/disc0/part1#/dev/discs/disc1/part1    \
#    .                                                      \
#    1 2 0 swap -                                           \
#          /dev/discs/disc0/part5#/dev/discs/disc1/part5    \
#    .                                                      \
#    0 2 0 ext3 /home                                       \
#          /dev/discs/disc0/part6#/dev/discs/disc1/part6    \
#    .

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition \
       select Finish partitioning and write changes to disk
d-i partman/confirm boolean true
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-time">
  <title>Clock and time zone setup</title>

<informalexample role="example"><screen>
# Controls whether or not the hardware clock is set to UTC.
d-i clock-setup/utc boolean true

# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string US/Eastern
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-apt">
  <title>Apt setup</title>
<para>

Setup of the <filename>/etc/apt/sources.list</filename> and basic configuration
options is fully automated based on your installation method and answers to
earlier questions. You can optionally add other (local) repositories.

</para>

<informalexample role="example"><screen>
# You can choose to install non-free and contrib software.
#d-i apt-setup/non-free boolean true
#d-i apt-setup/contrib boolean true
# Uncomment this to avoid adding security sources, or
# add a hostname to use a different server than security.debian.org.
#d-i apt-setup/security_host string

# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string \
#       deb http://local.server/debian stable main
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
#d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository
#d-i apt-setup/local0/key string http://local.server/key
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-account">
  <title>Account setup</title>
<para>

The password for the root account and name and password for a first regular
user's account can be preseeded. For the passwords you can use either clear
text values or MD5 <emphasis>hashes</emphasis>.

</para>
<warning><para>

Be aware that preseeding passwords is not completely secure as everyone
with access to the preconfiguration file will have the knowledge of these
passwords. Using MD5 hashes is considered slightly better in terms of
security but it might also give a false sense of security as access to a
MD5 hash allows for brute force attacks.

</para></warning>

<informalexample role="example"><screen>
# Skip creation of a root account (normal user account will be able to
# use sudo).
#d-i passwd/root-login boolean false
# Alternatively, to skip creation of a normal user account.
#d-i passwd/make-user boolean false

# Root password, either in clear text
#d-i passwd/root-password password r00tme
#d-i passwd/root-password-again password r00tme
# or encrypted using an MD5 hash.
#d-i passwd/root-password-crypted password [MD5 hash]

# To create a normal user account.
#d-i passwd/user-fullname string Debian User
#d-i passwd/username string debian
# Normal user's password, either in clear text
#d-i passwd/user-password password insecure
#d-i passwd/user-password-again password insecure
# or encrypted using an MD5 hash.
#d-i passwd/user-password-crypted password [MD5 hash]
</screen></informalexample>

<para>

The <classname>passwd/root-password-crypted</classname> and
<classname>passwd/user-password-crypted</classname> variables can also
be preseeded with <quote>!</quote> as their value. In that case, the
corresponding account is disabled. This may be convenient for the root
account, provided of course that an alternative method is setup to allow
administrative activities or root login (for instance by using SSH key
authentication or <command>sudo</command>).

</para><para>

An MD5 hash for a password can be generated using the following command.

<informalexample><screen>
$ echo "r00tme" | mkpasswd -s -H MD5
</screen></informalexample>

</para>
  </sect2>

  <sect2 id="preseed-base-installer">
  <title>Base system installation</title>
<para>

There is actually not very much that can be preseeded for this stage of the
installation. The only questions asked concern the installation of the kernel.

</para>

<informalexample role="example"><screen>
# Select the initramfs generator used to generate the initrd for 2.6 kernels.
#d-i base-installer/kernel/linux/initramfs-generators string yaird
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-bootloader">
  <title>Boot loader installation</title>

<informalexample role="example"><screen>
# Grub is the default boot loader (for x86). If you want lilo installed
# instead, uncomment this:
#d-i grub-installer/skip boolean true

# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
d-i grub-installer/only_debian boolean true

# This one makes grub-installer install to the MBR if if finds some other OS
# too, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true

# Alternatively, if you want to install to a location other than the mbr,
# uncomment and edit these lines:
#d-i grub-installer/only_debian boolean false
#d-i grub-installer/with_other_os boolean false
#d-i grub-installer/bootdev  string (hd0,0)
# To install grub to multiple disks:
#d-i grub-installer/bootdev  string (hd0,0) (hd1,0) (hd2,0)
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-pkgsel">
  <title>Package selection</title>
<para>

You can choose to install any combination of tasks that are available.
Available tasks as of this writing include:

</para>

<itemizedlist>
<listitem><para>
  <userinput>standard</userinput>
</para></listitem>
<listitem><para>
  <userinput>desktop</userinput>
</para></listitem>
<listitem><para>
  <userinput>gnome-desktop</userinput>
</para></listitem>
<listitem><para>
  <userinput>kde-desktop</userinput>
</para></listitem>
<listitem><para>
  <userinput>web-server</userinput>
</para></listitem>
<listitem><para>
  <userinput>print-server</userinput>
</para></listitem>
<listitem><para>
  <userinput>dns-server</userinput>
</para></listitem>
<listitem><para>
  <userinput>file-server</userinput>
</para></listitem>
<listitem><para>
  <userinput>mail-server</userinput>
</para></listitem>
<listitem><para>
  <userinput>sql-database</userinput>
</para></listitem>
<listitem><para>
  <userinput>laptop</userinput>
</para></listitem>
</itemizedlist>

<para>

You can also choose to install no tasks, and force the installation of a
set of packages in some other way. We recommend always including the
<userinput>standard</userinput> task.

</para><para>

If you want to install some individual packages in addition to packages
installed by tasks, you can use the parameter
<classname>pkgsel/include</classname>. The value of this parameter can be
either comma-separated or space-separated, so you can also use it easily on
the kernel command line.

</para>

<informalexample role="example"><screen>
tasksel tasksel/first multiselect standard, desktop
#tasksel tasksel/first multiselect standard, web-server
#tasksel tasksel/first multiselect standard, kde-desktop

# Individual additional packages to install
#d-i pkgsel/include string openssh-server build-essential

# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
#popularity-contest popularity-contest/participate boolean false
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-finish">
  <title>Finishing up the first stage install</title>

<informalexample role="example"><screen>
# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
#d-i cdrom-detect/eject boolean false
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-mailer">
  <title>Mailer configuration</title>
<para>

During a normal install, exim asks only a few questions. Here's how to
avoid even those. More complicated preseeding is possible.

</para>

<informalexample role="example"><screen>
exim4-config exim4/dc_eximconfig_configtype \
       select no configuration at this time
exim4-config exim4/no_config boolean true
exim4-config exim4/no_config boolean true
exim4-config exim4/dc_postmaster string
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-X">
  <title>X configuration</title>
<para>

Preseeding Debian's X config is possible, but you probably need to know
some details about the video hardware of the machine, since Debian's X
configurator does not do fully automatic configuration of everything.

</para>

<informalexample role="example"><screen>
# X can detect the right driver for some cards, but if you're preseeding,
# you override whatever it chooses. Still, vesa will work most places.
#xserver-xorg xserver-xorg/config/device/driver select vesa

# A caveat with mouse autodetection is that if it fails, X will retry it
# over and over. So if it's preseeded to be done, there is a possibility of
# an infinite loop if the mouse is not autodetected.
#xserver-xorg xserver-xorg/autodetect_mouse boolean true

# Monitor autodetection is recommended.
xserver-xorg xserver-xorg/autodetect_monitor boolean true
# Uncomment if you have an LCD display.
#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
# X has three configuration paths for the monitor. Here's how to preseed
# the "medium" path, which is always available. The "simple" path may not
# be available, and the "advanced" path asks too many questions.
xserver-xorg xserver-xorg/config/monitor/selection-method \
       select medium
xserver-xorg xserver-xorg/config/monitor/mode-list \
       select 1024x768 @ 60 Hz
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-other">
  <title>Preseeding other packages</title>

<informalexample role="example"><screen>
# Depending on what software you choose to install, or if things go wrong
# during the installation process, it's possible that other questions may
# be asked. You can preseed those too, of course. To get a list of every
# possible question that could be asked during an install, do an
# installation, and then run these commands:
#   debconf-get-selections --installer > file
#   debconf-get-selections >> file
</screen></informalexample>

  </sect2>
 </sect1>

 <sect1 id="preseed-advanced">
 <title>Advanced options</title>

  <sect2 id="preseed-shell">
  <title>Shell commands</title>

<informalexample role="example"><screen>
# d-i preseeding is inherently not secure. Nothing in the installer checks
# for attempts at buffer overflows or other exploits of the values of a
# preconfiguration file like this one. Only use preconfiguration files from
# trusted locations! To drive that home, and because it's generally useful,
# here's a way to run any shell command you'd like inside the installer,
# automatically.

# This first command is run as early as possible, just after
# preseeding is read.
#d-i preseed/early_command string anna-install some-udeb

# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-chainload">
  <title>Chainloading preconfiguration files</title>
<para>

It is possible to include other preconfiguration files from a preconfiguration
file. Any settings in those files will override pre-existing settings from
files loaded earlier. This makes it possible to put, for example, general
networking settings for your location in one file and more specific
settings for certain configurations in other files.

</para>

<informalexample><screen>
# More that one file can be listed, separated by spaces; all will be
# loaded. The included files can have preseed/include directives of their
# own as well. Note that if the filenames are relative, they are taken from
# the same directory as the preconfiguration file that includes them.
#d-i preseed/include string x.cfg

# The installer can optionally verify checksums of preconfiguration files
# before using them. Currently only md5sums are supported, list the md5sums
# in the same order as the list of files to include.
#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d

# More flexibly, this runs a shell command and if it outputs the names of
# preconfiguration files, includes those files. 
#d-i preseed/include_command \
#      string echo if [ "`hostname`" = bob ]; then echo bob.cfg; fi

# Most flexibly of all, this downloads a program and runs it. The program
# can use commands such as debconf-set to manipulate the debconf database.
# Note that if the filenames are relative, they are taken from the same
# directory as the preconfiguration file that runs them.
d-i preseed/run string foo.sh
</screen></informalexample>

  </sect2>
 </sect1>
</appendix>