path: root/en/appendix/preseed.xml

<!-- retain these comments for translator revision tracking -->
<!-- $Id$ -->

<!--
Be careful with the format of this file as it is parsed to generate
the example preconfiguration file.
In that file all text between <informalexample> tags that have the
attribute 'role="example"' set is included, except if a 'condition'
attribute is in force that does not match the specified release or if an
'arch' attribute is in force that does not match the specified architecture.

Currently only a single variant of the example file is generated (for i386).
-->

<appendix id="appendix-preseed">
<title>Automating the installation using preseeding</title>

<para>

This appendix explains how to preseed answers to questions in &d-i; to
automate your installation.

</para><para>

The configuration fragments used in this appendix are also available as an
example preconfiguration file from &urlset-example-preseed;.

</para>

 <sect1 id="preseed-intro">
 <title>Introduction</title>
<para>

Preseeding provides a way to set answers to questions asked during the
installation process, without having to manually enter the answers while
the installation is running. This makes it possible to fully automate most
types of installation and even offers some features not available during
normal installations.

</para><para>

Preseeding is not required. If you use an empty preseed file, the installer
will behave just the same way as in a normal manual installation. Each
question you preseed will (if you got it right!) modify the installation in
some way from that baseline.

</para>

  <sect2 id="preseed-methods">
  <title>Preseeding methods</title>
<para>

There are three methods that can be used for preseeding:
<firstterm>initrd</firstterm>, <firstterm>file</firstterm> and
<firstterm>network</firstterm>. Initrd preseeding will work with any
installation method and supports preseeding of more things, but it requires
the most preparation. File and network preseeding each can be used with
different installation methods.

</para><para>

The following table shows which preseeding methods can be used with which
installation methods.

<informaltable>
<tgroup cols="4">
<thead>
<row>
  <entry>Installation method</entry><entry>initrd</entry>
  <entry>file</entry><entry>network</entry>
</row>
</thead>

<tbody>
<row>
  <entry>CD/DVD</entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>yes<footnote id='apx-ps-net'>

  <para>
  but only if you have network access, and set <literal>preseed/url</literal>
  appropriately
  </para>

  </footnote></entry>
</row><row>
  <entry>netboot</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row><row>
  <entry>hd-media <phrase condition="bootable-usb">(including usb-stick)</phrase></entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>yes<footnoteref linkend="apx-ps-net"/></entry>
</row><row condition="supports-floppy-boot">
  <entry>floppy based (cd-drivers)</entry>
  <entry>yes</entry>
  <entry>yes</entry>
  <entry>yes<footnoteref linkend="apx-ps-net"/></entry>
</row><row condition="supports-floppy-boot">
  <entry>floppy based (net-drivers)</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row><row arch="s390">
  <entry>generic</entry>
  <entry>yes</entry>
  <entry>no</entry>
  <entry>yes</entry>
</row>
</tbody>

</tgroup></informaltable>

</para><para>

An important difference between the preseeding methods is the point at which
the preconfiguration file is loaded and processed. For initrd preseeding
this is right at the start of the installation, before the first question is
even asked. Preseeding from the kernel command line happens just after. It is
thus possible to override configuration set in the initrd by editing the kernel
command line (either in the bootloader configuration or manually at boot time
for bootloaders that allow it). For file preseeding this is after the CD
or CD image has been loaded. For network preseeding it is only after the
network has been configured.

</para><important><para>

Obviously, any questions that have been processed before the
preconfiguration file is loaded cannot be preseeded (this will include
questions that are only displayed at medium or low priority, like the
first hardware detection run). A not so convenient way to avoid these
questions from being asked is to preseed them through the boot parameters,
as described in <xref linkend="preseed-bootparms"/>.

</para><para>

In order to easily avoid the questions that would normally appear before the
preseeding occurs, you can start the installer in <quote>auto</quote>
mode. This delays questions that would normally be asked too early for
preseeding (i.e. language, country and keyboard selection) until after
the network comes up, thus allowing them to be preseeded. It also runs
the installation at critical priority, which avoids many unimportant
questions. See <xref linkend="preseed-auto"/> for details.

</para></important>
  </sect2>

  <sect2 id="preseed-limitations">
  <title>Limitations</title>
<para>

Although most questions used by &d-i; can be preseeded using this method,
there are some notable exceptions. You must (re)partition an entire disk
or use available free space on a disk; it is not possible to use existing
partitions.

</para>
  </sect2>

<!-- Joeyh feels this is too technical, so leave it out for now
  <sect2 id="preseed-debconf">
  <title>Debconf basics</title>
<para>

Preseeding makes use of the <classname>debconf</classname> framework. This
framework is the preferred mechanism used in &debian; to interact with the user
when configuring packages and also forms the heart of &d-i;.
In the <classname>debconf</classname> framework questions or dialogs are
based on <firstterm>templates</firstterm>. There are different types of
templates for different types of questions. The actual questions are
<quote>generated</quote> from templates at runtime;  multiple questions can
use the same template.

</para><para>

The following types of templates are relevant for preseeding.

</para>

<itemizedlist spacing="compact">
<listitem><para>
  string: allows the user to type any value
</para></listitem>
<listitem><para>
  password: similar to string but the value typed is not displayed
</para></listitem>
<listitem><para>
  boolean: for yes/no or true/false type of questions
</para></listitem>
<listitem><para>
  select: allows the user to select one option from a list
</para></listitem>
<listitem><para>
  multiselect: allows the user to select zero, one or more options from a list
</para></listitem>
<listitem><para>
  note: used to display a message
</para></listitem>
</itemizedlist>

<para>

In &d-i; templates are stored in a readable file
<filename>/var/cache/debconf/templates.dat</filename>. This file contains all fixed
text and all translations. It can also contain a default value for the
template. The fixed text can include variables that will be replaced at
runtime.

</para><para>

Another readable file <filename>/var/cache/debconf/questions.dat</filename>
is used to store the values for variables and the answers given to questions.
A question always refers to the template used to ask it. For obvious
security reasons the values for questions of type <quote>password</quote>
are stored in a separate, non-readable file in the same directory.

</para>
  </sect2>
-->
 </sect1>


 <sect1 id="preseed-using">
 <title>Using preseeding</title>
<para>

You will first need to create a preconfiguration file and place it in
the location from where you want to use it. Creating the preconfiguration file
is covered later in this appendix. Putting it in the correct location is fairly
straightforward for network preseeding or if you want to read the file off
a floppy or usb-stick. If you want to include the file on a CD or DVD, you
will have to remaster the ISO image. How to get the preconfiguration file
included in the initrd is outside the scope of this document; please consult
the developers' documentation for &d-i;.

</para><para>

An example preconfiguration file that you can use as basis for your own
preconfiguration file is available from &urlset-example-preseed;. This file is
based on the configuration fragments included in this appendix.

</para>

  <sect2 id="preseed-loading">
  <title>Loading the preconfiguration file</title>
<para>

If you are using initrd preseeding, you only have to make sure a file named
<filename>preseed.cfg</filename> is included in the root directory of the
initrd. The installer will automatically check if this file is present and
load it.

</para><para>

For the other preseeding methods you need to tell the installer what file
to use when you boot it. This is normally done by passing the kernel a boot
parameter, either manually at boot time or by editing the bootloader
configuration file <phrase arch="linux-any">(e.g.
<filename>syslinux.cfg</filename>) and adding the parameter to the end of
the append line(s) for the kernel.</phrase><phrase arch="kfreebsd-any">(e.g.
<filename>grub.cfg</filename>) and adding the parameter as a new
<literal>set</literal> line for the kernel.</phrase><phrase arch="hurd-any">(e.g.
<filename>grub.cfg</filename>) and adding the parameter to the end of the
<filename>gnumach.gz</filename> line.</phrase>

</para><para>

If you do specify the preconfiguration file in the bootloader configuration,
you might change the configuration so you don't need to hit enter to boot the
installer. <phrase arch="linux-any">For syslinux this means setting the timeout
to <literal>1</literal> in <filename>syslinux.cfg</filename>.</phrase><phrase
arch="kfrebsd-any;hurd-any">For grub this means setting the timeout to
<literal>0</literal> in <filename>grub.cfg</filename>.</phrase>

</para><para>

To make sure the installer gets the right preconfiguration file, you can
optionally specify a checksum for the file. Currently this needs to be a
md5sum, and if specified it must match the preconfiguration file or the
installer will refuse to use it.

</para>

<informalexample><screen>
Boot parameters to specify:
- if you're netbooting:
  preseed/url=http://host/path/to/preseed.cfg
  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d
- or
  preseed/url=tftp://host/path/to/preseed.cfg
  preseed/url/checksum=5da499872becccfeda2c4872f9171c3d

- if you're booting a remastered CD:
  preseed/file=/cdrom/preseed.cfg
  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d

- if you're installing from USB media (put the preconfiguration file in the
  toplevel directory of the USB stick):
  preseed/file=/hd-media/preseed.cfg
  preseed/file/checksum=5da499872becccfeda2c4872f9171c3d
</screen></informalexample>

<para>

Note that <filename>preseed/url</filename> can be shortened to just
<filename>url</filename>, <filename>preseed/file</filename> to just
<filename>file</filename> and <filename>preseed/file/checksum</filename> to just
<filename>preseed-md5</filename> when they are passed as boot parameters.

</para>
  </sect2>
  
  <sect2 id="preseed-bootparms">
  <title>Using boot parameters to preseed questions</title>
<para>

If a preconfiguration file cannot be used to preseed some steps, the
install can still be fully automated, since you can pass preseed values on
the command line when booting the installer.

</para><para>

Boot parameters can also be used if you do not really want to use preseeding,
but just want to provide an answer for a specific question. Some examples where
this can be useful are documented elsewhere in this manual.

</para><para>

To set a value to be used inside &d-i;, just pass
<userinput><replaceable>path/to/variable</replaceable>=<replaceable>value</replaceable></userinput>
for any of the preseed variables listed in the examples in this appendix.
If a value is to be used to configure packages for the target system, you
will need to prepend the <firstterm>owner</firstterm><footnote>

<para>
The owner of a debconf variable (or template) is normally the name of the
package that contains the corresponding debconf template. For variables
used in the installer itself the owner is <quote>d-i</quote>.
Templates and variables can have more than one owner which helps to
determine whether they can be removed from the debconf database if the
package is purged.
</para>

</footnote> of the variable as in
<userinput><replaceable>owner</replaceable>:<replaceable>path/to/variable</replaceable>=<replaceable>value</replaceable></userinput>.
If you don't specify the owner, the value for the variable will not be
copied to the debconf database in the target system and thus remain unused
during the configuration of the relevant package.

</para><para>

Normally, preseeding a question in this way will mean that the question will
not be asked. To set a specific default value for a question, but still have
the question asked, use <quote>?=</quote> instead of <quote>=</quote> as
operator. See also <xref linkend="preseed-seenflag"/>.

</para><para>

Note that some variables that are frequently set at the boot prompt
have a shorter alias. If an alias is available, it is used in the
examples in this appendix instead of the full variable. The
<literal>preseed/url</literal> variable for example has been aliased as
<literal>url</literal>. Another example is the <literal>tasks</literal>
alias, which translates to <literal>tasksel:tasksel/first</literal>.

</para><para>

A <quote>---</quote> in the boot options has special meaning. Kernel
parameters that appear after the last <quote>---</quote> may be copied
into the bootloader configuration for the installed system (if supported by
the installer for the bootloader). The installer will automatically filter
out any options (like preconfiguration options) that it recognizes.

</para>
<note arch="linux-any"><para>

Current linux kernels (2.6.9 and later) accept a maximum of 32 command line
options and 32 environment options, including any options added by default
for the installer. If these numbers are exceeded, the kernel will panic
(crash). (For earlier kernels, these numbers were lower.)

</para></note>
<para>

For most installations some of the default options in your bootloader
configuration file, like <literal>vga=normal</literal>, may be safely
removed which may allow you to add more options for preseeding.

</para>
<note><para>

It may not always be possible to specify values with spaces for boot
parameters, even if you delimit them with quotes.

</para></note>
  </sect2>
  
  <sect2 id="preseed-auto">
  <title>Auto mode</title>
<para>

There are several features of &debian; Installer that combine to allow
fairly simple command lines at the boot prompt to result in
arbitrarily complex customized automatic installs.

</para><para>

This is enabled by using the <literal>Automated install</literal> boot choice,
also called <literal>auto</literal> for some architectures or boot methods. In
this section, <literal>auto</literal> is thus not a parameter, it means
selecting that boot choice, and appending the following boot parameters on
the boot prompt. <phrase arch="x86">See <xref linkend="boot-screen"/> for
information on how to add a boot parameter.</phrase>

</para><para>

To illustrate this, here are some examples that can be used at the boot prompt:

<informalexample><screen>
auto url=autoserver
</screen></informalexample>

This relies on there being a DHCP server that will get the machine to
the point where <literal>autoserver</literal> can be resolved by DNS,
perhaps after adding the local domain if that was provided by DHCP.
If this was done at a site where the domain is
<literal>example.com</literal>, and they have a reasonably sane DHCP
setup, it would result in the preseed file being retrieved from
<literal>http://autoserver.example.com/d-i/&releasename;/./preseed.cfg</literal>.

</para><para>

The last part of that url (<literal>d-i/&releasename;/./preseed.cfg</literal>)
is taken from <literal>auto-install/defaultroot</literal>. By default
this includes the directory <literal>&releasename;</literal> to allow future versions
to specify their own codename and let people migrate forwards in a
controlled manner.  The <literal>/./</literal> bit is used to indicate
a root, relative to which subsequent paths can be anchored (for use in
preseed/include and preseed/run).  This allows files to be specified
either as full URLs, paths starting with / that are thus anchored, or
even paths relative to the location where the last preseed file was
found.  This can be used to construct more portable scripts where an
entire hierarchy of scripts can be moved to a new location without
breaking it, for example copying the files onto a USB stick when they
started out on a web server.  In this example, if the preseed file
sets <literal>preseed/run</literal> to
<literal>/scripts/late_command.sh</literal> then the file will be
fetched from
<literal>http://autoserver.example.com/d-i/&releasename;/./scripts/late_command.sh</literal>.

</para><para>

If there is no local DHCP or DNS infrastructure, or if you do not want to
use the default path to <filename>preseed.cfg</filename>, you can still
use an explicit url, and if you don't use the <literal>/./</literal>
element it will be anchored to the start of the path (i.e. the third
<literal>/</literal> in the URL).  Here is an example that requires minimal
support from the local network infrastructure:

<informalexample><screen>
auto url=<replaceable>http://192.168.1.2/path/to/mypreseed.file</replaceable>
</screen></informalexample>

The way this works is that:
<itemizedlist spacing="compact">
<listitem><para>
if the URL is missing a protocol, http is assumed,
</para></listitem>
<listitem><para>
if the hostname section contains no periods, it has the domain derived
from DHCP appended to it, and
</para></listitem>
<listitem><para>
if there's no <literal>/</literal>'s after the hostname, then the default
path is added.
</para></listitem>
</itemizedlist>

</para><para>

In addition to specifying the url, you can also specify settings that
do not directly affect the behavior of &d-i; itself, but can be passed
through to scripts specified using <literal>preseed/run</literal>
in the loaded preseed file.  At present, the only example of
this is <literal>auto-install/classes</literal>, which has an alias
<literal>classes</literal>.  This can be used thus:

<informalexample><screen>
auto url=<replaceable>example.com</replaceable> classes=<replaceable>class_A;class_B</replaceable>
</screen></informalexample>

The classes could for example denote the type of system to be installed,
or the localization to be used.

</para><para>

It is of course possible to extend this concept, and if you do, it is
reasonable to use the auto-install namespace for this. So one might have
something like <literal>auto-install/style</literal> which is then used
in your scripts.  If you feel the need to do this, please mention it on
the <email>debian-boot@lists.debian.org</email> mailing list so that we
can avoid namespace conflicts, and perhaps add an alias for the parameter
for you.

</para><para>

The <literal>auto</literal> boot choice is not yet defined on all arches.
The same effect may be achieved by simply adding the two
parameters <literal>auto=true priority=critical</literal> to the kernel
command line.  The <literal>auto</literal> kernel parameter is an alias for
<literal>auto-install/enable</literal> and setting it to
<literal>true</literal> delays the
locale and keyboard questions until after there has been a chance to
preseed them, while <literal>priority</literal> is an alias for
<literal>debconf/priority</literal> and setting it to
<literal>critical</literal> stops any questions with a lower priority
from being asked.

</para><para>

Additional options that may be of interest while attempting to
automate an install while using DHCP are: <literal>interface=auto
netcfg/dhcp_timeout=60</literal> which makes the machine choose the
first viable NIC and be more patient about getting a reply to its
DHCP query.

</para>
<tip><para>

An extensive example of how to use this framework, including example scripts
and classes, can be found on the <ulink url="http://hands.com/d-i/">website
of its developer</ulink>. The examples available there also show many other
nice effects that can be achieved by creative use of preconfiguration.

</para></tip>
  </sect2>

  <sect2 id="preseed-aliases">
  <title>Aliases useful with preseeding</title>
<para>

The following aliases can be useful when using (auto mode) preseeding.
Note that these are simply short aliases for question names, and you
always need to specify a value as well: for example,
<literal>auto=true</literal> or <literal>interface=eth0</literal>.

</para>

<!-- Setting column width does not seem to work; use non-breaking spaces
     to separate columns a bit -->
<informaltable frame="none">
<tgroup cols="2"><tbody>
<row><entry>priority</entry><entry>debconf/priority</entry></row>
<row><entry>fb</entry><entry>debian-installer/framebuffer</entry></row>
<row><entry>language</entry><entry>debian-installer/language</entry></row>
<row><entry>country</entry><entry>debian-installer/country</entry></row>
<row><entry>locale</entry><entry>debian-installer/locale</entry></row>
<row><entry>theme</entry><entry>debian-installer/theme</entry></row>
<row><entry>auto</entry><entry>auto-install/enable</entry></row>
<row><entry>classes</entry><entry>auto-install/classes</entry></row>
<row><entry>file</entry><entry>preseed/file</entry></row>
<row><entry>url</entry><entry>preseed/url</entry></row>
<row><entry>domain</entry><entry>netcfg/get_domain</entry></row>
<row><entry>hostname&nbsp;&nbsp;&nbsp;</entry><entry>netcfg/get_hostname</entry></row>
<row><entry>interface</entry><entry>netcfg/choose_interface</entry></row>
<row><entry>protocol</entry><entry>mirror/protocol</entry></row>
<row><entry>suite</entry><entry>mirror/suite</entry></row>
<row><entry>modules</entry><entry>anna/choose_modules</entry></row>
<row><entry>recommends</entry><entry>base-installer/install-recommends</entry></row>
<row><entry>tasks</entry><entry>tasksel:tasksel/first</entry></row>
<row><entry>desktop</entry><entry>tasksel:tasksel/desktop</entry></row>
<row><entry>dmraid</entry><entry>disk-detect/dmraid/enable</entry></row>
<row><entry>keymap</entry><entry>keyboard-configuration/xkb-keymap</entry></row>
<row><entry>preseed-md5</entry><entry>preseed/file/checksum</entry></row>
</tbody></tgroup>
</informaltable>

  </sect2>
  
  <sect2 id="preseed-dhcp">
  <title>Using a DHCP server to specify preconfiguration files</title>
<para>

It's also possible to use DHCP to specify a preconfiguration file to download
from the network. DHCP allows specifying a filename. Normally this is a file
to netboot, but if it appears to be an URL then installation media that
support network preseeding will download the file from the URL and use it as a
preconfiguration file. Here is an example of how to set it up in the dhcpd.conf
for version 3 of the ISC DHCP server (the isc-dhcp-server &debian; package).

</para>

<informalexample><screen>
if substring (option vendor-class-identifier, 0, 3) = "d-i" {
    filename "http://host/preseed.cfg";
}
</screen></informalexample>

<para>

Note that the above example limits this filename to DHCP clients that identify
themselves as "d-i", so it will not affect regular DHCP clients, but only
the installer. You can also put the text in a stanza for only one particular
host to avoid preseeding all installs on your network.

</para><para>

A good way to use the DHCP preseeding is to only preseed values specific to
your network, such as the &debian; mirror to use. This way installs on your
network will automatically get a good mirror selected, but the rest of the
installation can be performed interactively. Using DHCP preseeding to fully
automate &debian; installs should only be done with care.

</para>
  </sect2>
 </sect1>


 <sect1 id="preseed-creating">
 <title>Creating a preconfiguration file</title>
<para>

The preconfiguration file is in the format used by the
<command>debconf-set-selections</command> command. The general format of
a line in a preconfiguration file is:

<informalexample><screen>
&lt;owner&gt; &lt;question name&gt; &lt;question type&gt; &lt;value&gt;
</screen></informalexample>

</para><para>

There are a few rules to keep in mind when writing a preconfiguration file.

</para>

<itemizedlist>
<listitem><para>
  Put only a single space or tab between type and value: any additional
  whitespace will be interpreted as belonging to the value.
</para></listitem>
<listitem><para>
  A line can be split into multiple lines by appending a backslash
  (<quote><literal>\</literal></quote>) as the line continuation character.
  A good place to split a line is after the question name; a bad place is
  between type and value. Split lines will be joined into a single line
  with all leading/trailing whitespace condensed to a single space.
</para></listitem>
<listitem><para>
  For debconf variables (templates) used only in the installer itself, the
  owner should be set to <quote>d-i</quote>; to preseed variables used
  in the installed system, the name of the package that contains the
  corresponding debconf template should be used. Only variables that have
  their owner set to something other than <quote>d-i</quote> will be
  propagated to the debconf database for the installed system.
</para></listitem>
<listitem><para>
  Most questions need to be preseeded using the values valid in English and
  not the translated values. However, there are some questions (for example
  in <classname>partman</classname>) where the translated values need to be
  used.
</para></listitem>
<listitem><para>
  Some questions take a code as value instead of the English text that is
  shown during installation.
</para></listitem>
</itemizedlist>

<para>

The easiest way to create a preconfiguration file is to use the example file
linked in <xref linkend="preseed-contents"/> as basis and work from there.

</para><para>

An alternative method is to do a manual installation and then, after
rebooting, use the <command>debconf-get-selections</command> from the
<classname>debconf-utils</classname> package to dump both the debconf
database and the installer's cdebconf database to a single file:

<informalexample><screen>
$ debconf-get-selections --installer &gt; <replaceable>file</replaceable>
$ debconf-get-selections &gt;&gt; <replaceable>file</replaceable>
</screen></informalexample>

</para><para>

However, a file generated in this manner will have some items that should
not be preseeded, and the example file is a better starting place for most
users.

</para>

<note><para>

This method relies on the fact that, at the end of the installation, the
installer's cdebconf database is saved to the installed system in
<filename>/var/log/installer/cdebconf</filename>. However, because the
database may contain sensitive information, by default the files are only
readable by root.

</para><para>

The directory <filename>/var/log/installer</filename> and all files in it
will be deleted from your system if you purge the package
<classname>installation-report</classname>.

</para></note>

<para>

To check possible values for questions, you can use <command>nano</command>
to examine the files in <filename>/var/lib/cdebconf</filename> while an
installation is in progress. View <filename>templates.dat</filename> for
the raw templates and <filename>questions.dat</filename> for the current
values and for the values assigned to variables.

</para><para>

To check if the format of your preconfiguration file is valid before performing
an install, you can use the command <command>debconf-set-selections -c
<replaceable>preseed.cfg</replaceable></command>.

</para>
 </sect1>


 <sect1 id="preseed-contents">
 <title>Contents of the preconfiguration file (for &releasename;)</title>
<para>

The configuration fragments used in this appendix are also available as an
example preconfiguration file from &urlset-example-preseed;.

</para><para>

Note that this example is based on an installation for the Intel x86
architecture. If you are installing a different architecture, some of the
examples (like keyboard selection and bootloader installation) may not be
relevant and will need to be replaced by debconf settings appropriate for
your architecture.

</para><para>

Details on how the different Debian Installer components actually work can be
found in <xref linkend="module-details"/>.

</para>
 
  <sect2 id="preseed-l10n">
  <title>Localization</title>
<para>

During a normal install the questions about localization are asked first,
so these values can only be preseeded via the initrd or kernel boot
parameter methods. Auto mode (<xref linkend="preseed-auto"/>) includes
the setting of <literal>auto-install/enable=true</literal> (normally via
the <literal>auto</literal> preseed alias).  This delays the asking of
the localisation questions, so that they can be preseeded by any method.

</para><para>

The locale can be used to specify both language and country and can be any
combination of a language supported by &d-i; and a recognized country. If
the combination does not form a valid locale, the installer will automatically
select a locale that is valid for the selected language.
To specify the locale as a boot parameter, use
<userinput>locale=<replaceable>en_US</replaceable></userinput>.

</para><para>

Although this method is very easy to use, it does not allow preseeding of
all possible combinations of language, country and locale<footnote>

<para>
Preseeding <literal>locale</literal> to <userinput>en_NL</userinput> would
for example result in <literal>en_US.UTF-8</literal> as default locale for
the installed system. If e.g. <literal>en_GB.UTF-8</literal> is preferred
instead, the values will need to be preseeded individually.
</para>

</footnote>. So alternatively the values can be preseeded individually.
Language and country can also be specified as boot parameters.

<informalexample role="example"><screen>
# Preseeding only locale sets language, country and locale.
d-i debian-installer/locale string en_US

# The values can also be preseeded individually for greater flexibility.
#d-i debian-installer/language string en
#d-i debian-installer/country string NL
#d-i debian-installer/locale string en_GB.UTF-8
# Optionally specify additional locales to be generated.
#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
</screen></informalexample>

</para><para>

Keyboard configuration consists of selecting a keymap and (for non-latin
keymaps) a toggle key to switch between the non-latin keymap and the US keymap.
Only basic keymap variants are available during installation. Advanced variants
are available only in the installed system, through <command>dpkg-reconfigure
keyboard-configuration</command>.

<informalexample role="example"><screen>
# Keyboard selection.
d-i keyboard-configuration/xkb-keymap select us
# d-i keyboard-configuration/toggle select No toggling
</screen></informalexample>

</para><para>

To skip keyboard configuration, preseed
<classname>keymap</classname> with
<userinput>skip-config</userinput>.
This will result in the kernel keymap remaining active.

</para>

  </sect2>

  <sect2 id="preseed-network">
  <title>Network configuration</title>
<para>

Of course, preseeding the network configuration won't work if you're
loading your preconfiguration file from the network. But it's great when
you're booting from CD or USB stick. If you are loading preconfiguration
files from the network, you can pass network config parameters by using
kernel boot parameters.

</para><para>

If you need to pick a particular interface when netbooting before loading
a preconfiguration file from the network, use a boot parameter such as
<userinput>interface=<replaceable>eth1</replaceable></userinput>.

</para><para>

Although preseeding the network configuration is normally not possible when
using network preseeding (using <quote>preseed/url</quote>), you can use
the following hack to work around that, for example if you'd like to set a
static address for the network interface. The hack is to force the network
configuration to run again after the preconfiguration file has been loaded
by creating a <quote>preseed/run</quote> script containing the following
commands:

<informalexample><screen>
kill-all-dhcp; netcfg
</screen></informalexample>

</para><para>

The following debconf variables are relevant for network configuration.

</para>

<informalexample role="example"><screen>
# Disable network configuration entirely. This is useful for cdrom
# installations on non-networked devices where the network questions,
# warning and long timeouts are a nuisance.
#d-i netcfg/enable boolean false

# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
d-i netcfg/choose_interface select auto

# To pick a particular interface instead:
#d-i netcfg/choose_interface select eth1

# To set a different link detection timeout (default is 3 seconds).
# Values are interpreted as seconds.
#d-i netcfg/link_wait_timeout string 10

# If you have a slow dhcp server and the installer times out waiting for
# it, this might be useful.
#d-i netcfg/dhcp_timeout string 60
#d-i netcfg/dhcpv6_timeout string 60

# If you prefer to configure the network manually, uncomment this line and
# the static network configuration below.
#d-i netcfg/disable_autoconfig boolean true

# If you want the preconfiguration file to work on systems both with and
# without a dhcp server, uncomment these lines and the static network
# configuration below.
#d-i netcfg/dhcp_failed note
#d-i netcfg/dhcp_options select Configure network manually

# Static network configuration.
#
# IPv4 example
#d-i netcfg/get_ipaddress string 192.168.1.42
#d-i netcfg/get_netmask string 255.255.255.0
#d-i netcfg/get_gateway string 192.168.1.1
#d-i netcfg/get_nameservers string 192.168.1.1
#d-i netcfg/confirm_static boolean true
#
# IPv6 example
#d-i netcfg/get_ipaddress string fc00::2
#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
#d-i netcfg/get_gateway string fc00::1
#d-i netcfg/get_nameservers string fc00::1
#d-i netcfg/confirm_static boolean true

# Any hostname and domain names assigned from dhcp take precedence over
# values set here. However, setting the values still prevents the questions
# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string unassigned-hostname
d-i netcfg/get_domain string unassigned-domain

# If you want to force a hostname, regardless of what either the DHCP
# server returns or what the reverse DNS entry for the IP is, uncomment
# and adjust the following line.
#d-i netcfg/hostname string somehost

# Disable that annoying WEP key dialog.
d-i netcfg/wireless_wep string
# The wacky dhcp hostname that some ISPs use as a password of sorts.
#d-i netcfg/dhcp_hostname string radish

# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# change to false to disable asking.
#d-i hw-detect/load_firmware boolean true
</screen></informalexample>

<para>

Please note that <command>netcfg</command> will automatically determine the
netmask if <classname>netcfg/get_netmask</classname> is not preseeded.  In
this case, the variable has to be marked as <literal>seen</literal> for
automatic installations.  Similarly, <command>netcfg</command> will choose
an appropriate address if <classname>netcfg/get_gateway</classname> is not
set.  As a special case, you can set
<classname>netcfg/get_gateway</classname> to <quote>none</quote> to specify
that no gateway should be used.

</para>

  </sect2>

  <sect2 id="preseed-network-console">
  <title>Network console</title>

<informalexample role="example"><screen>
# Use the following settings if you wish to make use of the network-console
# component for remote installation over SSH. This only makes sense if you
# intend to perform the remainder of the installation manually.
#d-i anna/choose_modules string network-console
#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
#d-i network-console/password password r00tme
#d-i network-console/password-again password r00tme
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-mirror">
  <title>Mirror settings</title>
<para>

Depending on the installation method you use, a mirror may be used to
download additional components of the installer, to install the base system,
and to set up the <filename>/etc/apt/sources.list</filename> for the installed
system.

</para><para>

The parameter <classname>mirror/suite</classname> determines the suite for
the installed system.

</para><para>

The parameter <classname>mirror/udeb/suite</classname> determines the suite
for additional components for the installer. It is only useful to set this
if components are actually downloaded over the network and should match the
suite that was used to build the initrd for the installation method used for
the installation. Normally the installer will automatically use the correct
value and there should be no need to set this.

</para>

<informalexample role="example"><screen>
# If you select ftp, the mirror/country string does not need to be set.
#d-i mirror/protocol string ftp
d-i mirror/country string manual
d-i mirror/http/hostname string &archive-mirror;
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string

# Suite to install.
#d-i mirror/suite string testing
# Suite to use for loading installer components (optional).
#d-i mirror/udeb/suite string testing
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-account">
  <title>Account setup</title>
<para>

The password for the root account and name and password for a first regular
user's account can be preseeded. For the passwords you can use either clear
text values or crypt(3) <emphasis>hashes</emphasis>.

</para>
<warning><para>

Be aware that preseeding passwords is not completely secure as everyone
with access to the preconfiguration file will have the knowledge of these
passwords. Storing hashed passwords is considered secure unless a weak
hashing algorithm like DES or MD5 is used which allow for bruteforce
attacks. Recommended password hashing algorithms are SHA-256 and SHA512.

</para></warning>

<informalexample role="example"><screen>
# Skip creation of a root account (normal user account will be able to
# use sudo).
#d-i passwd/root-login boolean false
# Alternatively, to skip creation of a normal user account.
#d-i passwd/make-user boolean false

# Root password, either in clear text
#d-i passwd/root-password password r00tme
#d-i passwd/root-password-again password r00tme
# or encrypted using a crypt(3)  hash.
#d-i passwd/root-password-crypted password [crypt(3) hash]

# To create a normal user account.
#d-i passwd/user-fullname string Debian User
#d-i passwd/username string debian
# Normal user's password, either in clear text
#d-i passwd/user-password password insecure
#d-i passwd/user-password-again password insecure
# or encrypted using a crypt(3) hash.
#d-i passwd/user-password-crypted password [crypt(3) hash]
# Create the first user with the specified UID instead of the default.
#d-i passwd/user-uid string 1010

# The user account will be added to some standard initial groups. To
# override that, use this.
#d-i passwd/user-default-groups string audio cdrom video
</screen></informalexample>

<para>

The <classname>passwd/root-password-crypted</classname> and
<classname>passwd/user-password-crypted</classname> variables can also
be preseeded with <quote>!</quote> as their value. In that case, the
corresponding account is disabled. This may be convenient for the root
account, provided of course that an alternative method is set up to allow
administrative activities or root login (for instance by using SSH key
authentication or <command>sudo</command>).

</para><para>

The following command (available from the <classname>whois</classname> package)
can be used to generate a SHA-512 based crypt(3) hash for a password:

<informalexample><screen>
mkpasswd -m sha-512
</screen></informalexample>

</para>
  </sect2>

  <sect2 id="preseed-time">
  <title>Clock and time zone setup</title>

<informalexample role="example"><screen>
# Controls whether or not the hardware clock is set to UTC.
d-i clock-setup/utc boolean true

# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string US/Eastern

# Controls whether to use NTP to set the clock during the install
d-i clock-setup/ntp boolean true
# NTP server to use. The default is almost always fine here.
#d-i clock-setup/ntp-server string ntp.example.com
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-partman">
  <title>Partitioning</title>
<para>

Using preseeding to partition the harddisk is limited to what is supported
by <classname>partman-auto</classname>. You can choose to partition
either existing free space on a disk or a whole disk. The layout of the
disk can be determined by using a predefined recipe, a custom recipe from
a recipe file or a recipe included in the preconfiguration file.

</para><para>

Preseeding of advanced partition setups using RAID, LVM and encryption is
supported, but not with the full flexibility possible when partitioning
during a non-preseeded install.

</para><para>

The examples below only provide basic information on the use of recipes.
For detailed information see the files
<filename>partman-auto-recipe.txt</filename> and
<filename>partman-auto-raid-recipe.txt</filename> included in the
<classname>debian-installer</classname> package.
Both files are also available from the
<ulink url="&url-d-i-gitweb-doc-devel;">&d-i; source
repository</ulink>. Note that the supported functionality may change
between releases.

</para>

<warning><para>

The identification of disks is dependent on the order in which their drivers
are loaded. If there are multiple disks in the system, make very sure the
correct one will be selected before using preseeding.

</para></warning>

   <sect3 id="preseed-partman-example">
   <title>Partitioning example</title>

<informalexample role="example"><screen>
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/sda
# and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
d-i partman-auto/method string lvm

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# The full recipe format is documented in the file partman-auto-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository. This also documents how to specify settings such as file
# system labels, volume group names and which physical devices to include
# in a volume group.

# This makes partman automatically partition without confirmation, provided
# that you told it what to do using one of the methods above.
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true
</screen></informalexample>

   </sect3>
   <sect3 id="preseed-partman-raid">
   <title>Partitioning using RAID</title>
<para>

You can also use preseeding to set up partitions on software RAID arrays.
Supported are RAID levels 0, 1, 5, 6 and 10, creating degraded arrays and
specifying spare devices.

</para><para arch="any-x86">

If you are using RAID 1, you can preseed grub to install to all devices
used in the array; see <xref linkend="preseed-bootloader"/>.

</para>

<warning><para>

This type of automated partitioning is easy to get wrong. It is also
functionality that receives relatively little testing from the developers
of &d-i;. The responsibility to get the various recipes right (so they
make sense and don't conflict) lies with the user.
Check <filename>/var/log/syslog</filename> if you run into problems.

</para></warning>

<informalexample role="example"><screen>
# The method should be set to "raid".
#d-i partman-auto/method string raid
# Specify the disks to be partitioned. They will all get the same layout,
# so this will only work if the disks are the same size.
#d-i partman-auto/disk string /dev/sda /dev/sdb

# Next you need to specify the physical partitions that will be used. 
#d-i partman-auto/expert_recipe string \
#      multiraid ::                                         \
#              1000 5000 4000 raid                          \
#                      $primary{ } method{ raid }           \
#              .                                            \
#              64 512 300% raid                             \
#                      method{ raid }                       \
#              .                                            \
#              500 10000 1000000000 raid                    \
#                      method{ raid }                       \
#              .

# Last you need to specify how the previously defined partitions will be
# used in the RAID setup. Remember to use the correct partition numbers
# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
# devices are separated using "#".
# Parameters are:
# &lt;raidtype&gt; &lt;devcount&gt; &lt;sparecount&gt; &lt;fstype&gt; &lt;mountpoint&gt; \
#          &lt;devices&gt; &lt;sparedevices&gt;

#d-i partman-auto-raid/recipe string \
#    1 2 0 ext3 /                    \
#          /dev/sda1#/dev/sdb1       \
#    .                               \
#    1 2 0 swap -                    \
#          /dev/sda5#/dev/sdb5       \
#    .                               \
#    0 2 0 ext3 /home                \
#          /dev/sda6#/dev/sdb6       \
#    .

# For additional information see the file partman-auto-raid-recipe.txt
# included in the 'debian-installer' package or available from D-I source
# repository.

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true
</screen></informalexample>

   </sect3>

   <sect3 id="preseed-partman-mount-styles">
   <title>Controlling how partitions are mounted</title>
<para>

Normally, filesystems are mounted using a universally unique identifier
(UUID) as a key; this allows them to be mounted properly even if their
device name changes. UUIDs are long and difficult to read, so, if you
prefer, the installer can mount filesystems based on the traditional device
names, or based on a label you assign. If you ask the installer to mount by
label, any filesystems without a label will be mounted using a UUID instead.

</para><para>

Devices with stable names, such as LVM logical volumes, will continue to use
their traditional names rather than UUIDs.

</para>

<warning><para>

Traditional device names may change based on the order in which the kernel
discovers devices at boot, which may cause the wrong filesystem to be
mounted. Similarly, labels are likely to clash if you plug in a new disk or
a USB drive, and if that happens your system's behaviour when started will
be random.

</para></warning>

<informalexample role="example"><screen>
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid
</screen></informalexample>

   </sect3>
  </sect2>

  <sect2 id="preseed-base-installer">
  <title>Base system installation</title>
<para>

There is actually not very much that can be preseeded for this stage of the
installation. The only questions asked concern the installation of the kernel.

</para>

<informalexample role="example"><screen>
# Configure APT to not install recommended packages by default. Use of this
# option can result in an incomplete system and should only be used by very
# experienced users.
#d-i base-installer/install-recommends boolean false

# The kernel image (meta) package to be installed; "none" can be used if no
# kernel is to be installed.
#d-i base-installer/kernel/image string &kernelpackage;-686
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-apt">
  <title>Apt setup</title>
<para>

Setup of the <filename>/etc/apt/sources.list</filename> and basic configuration
options is fully automated based on your installation method and answers to
earlier questions. You can optionally add other (local) repositories.

</para>

<informalexample role="example"><screen>
# You can choose to install non-free and contrib software.
#d-i apt-setup/non-free boolean true
#d-i apt-setup/contrib boolean true
# Uncomment this if you don't want to use a network mirror.
#d-i apt-setup/use_mirror boolean false
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
#d-i apt-setup/services-select multiselect security, updates
#d-i apt-setup/security_host string security.debian.org

# Additional repositories, local[0-9] available
#d-i apt-setup/local0/repository string \
#       http://local.server/debian stable main
#d-i apt-setup/local0/comment string local server
# Enable deb-src lines
#d-i apt-setup/local0/source boolean true
# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
#d-i apt-setup/local0/key string http://local.server/key

# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
# authentication. Warning: Insecure, not recommended.
#d-i debian-installer/allow_unauthenticated boolean true

# Uncomment this to add multiarch configuration for i386
#d-i apt-setup/multiarch string i386

</screen></informalexample>

  </sect2>

  <sect2 id="preseed-pkgsel">
  <title>Package selection</title>
<para>

You can choose to install any combination of tasks that are available.
Available tasks as of this writing include:

</para>

<itemizedlist>
<listitem><para>
  <userinput>standard</userinput> (standard tools)
</para></listitem>
<listitem><para>
  <userinput>desktop</userinput> (graphical desktop)
</para></listitem>
<listitem><para>
  <userinput>gnome-desktop</userinput> (Gnome desktop)
</para></listitem>
<listitem><para>
  <userinput>xfce-desktop</userinput> (XFCE desktop)
</para></listitem>
<listitem><para>
  <userinput>kde-desktop</userinput> (KDE Plasma desktop)
</para></listitem>
<listitem><para>
  <userinput>cinnamon-desktop</userinput> (Cinnamon desktop)
</para></listitem>
<listitem><para>
  <userinput>mate-desktop</userinput> (MATE desktop)
</para></listitem>
<listitem><para>
  <userinput>lxde-desktop</userinput> (LXDE desktop)
</para></listitem>
<listitem><para>
  <userinput>web-server</userinput> (web server)
</para></listitem>
<listitem><para>
  <userinput>print-server</userinput> (print server)
</para></listitem>
<listitem><para>
  <userinput>ssh-server</userinput> (SSH server)
</para></listitem>
</itemizedlist>

<para>

You can also choose to install no tasks, and force the installation of a
set of packages in some other way. We recommend always including the
<userinput>standard</userinput> task.

</para><para>

If you want to install some individual packages in addition to packages
installed by tasks, you can use the parameter
<classname>pkgsel/include</classname>. The value of this parameter can be
a list of packages separated by either commas or spaces, which allows it
to be used easily on the kernel command line as well.

</para>

<informalexample role="example"><screen>
#tasksel tasksel/first multiselect standard, web-server, kde-desktop

# Individual additional packages to install
#d-i pkgsel/include string openssh-server build-essential
# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
#d-i pkgsel/upgrade select none

# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
#popularity-contest popularity-contest/participate boolean false
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-bootloader" arch="any-x86">
  <title>Boot loader installation</title>

<informalexample role="example"><screen>
<phrase arch="linux-any"># Grub is the default boot loader (for x86). If you want lilo installed
# instead, uncomment this:
#d-i grub-installer/skip boolean true
# To also skip installing lilo, and install no bootloader, uncomment this
# too:
#d-i lilo-installer/skip boolean true</phrase>
<phrase arch="kfreebsd-any;hurd-any"># To install no bootloader, uncomment this
#d-i grub-installer/skip boolean true</phrase>

# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
d-i grub-installer/only_debian boolean true

# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true

# Due notably to potential USB sticks, the location of the MBR can not be
# determined safely in general, so this needs to be specified:
#d-i grub-installer/bootdev  string /dev/sda
# To install to the first device (assuming it is not a USB stick):
#d-i grub-installer/bootdev  string default

# Alternatively, if you want to install to a location other than the mbr,
# uncomment and edit these lines:
#d-i grub-installer/only_debian boolean false
#d-i grub-installer/with_other_os boolean false
#d-i grub-installer/bootdev  string (hd0,1)
# To install grub to multiple disks:
#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)

# Optional password for grub, either in clear text
#d-i grub-installer/password password r00tme
#d-i grub-installer/password-again password r00tme
# or encrypted using an MD5 hash, see grub-md5-crypt(8).
#d-i grub-installer/password-crypted password [MD5 hash]

# Use the following option to add additional boot parameters for the
# installed system (if supported by the bootloader installer).
# Note: options passed to the installer will be added automatically.
#d-i debian-installer/add-kernel-opts string nousb
</screen></informalexample>

<para>

An MD5 hash for a password for <classname>grub</classname> can be generated
using <command>grub-md5-crypt</command>, or using the command from the
example in <xref linkend="preseed-account"/>.

</para>
  </sect2>

  <sect2 id="preseed-finish">
  <title>Finishing up the installation</title>

<informalexample role="example"><screen>
# During installations from serial console, the regular virtual consoles
# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
# line to prevent this.
#d-i finish-install/keep-consoles boolean true

# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

# This will prevent the installer from ejecting the CD during the reboot,
# which is useful in some situations.
#d-i cdrom-detect/eject boolean false

# This is how to make the installer shutdown when finished, but not
# reboot into the installed system.
#d-i debian-installer/exit/halt boolean true
# This will power off the machine instead of just halting it.
#d-i debian-installer/exit/poweroff boolean true
</screen></informalexample>

  </sect2>

  <sect2 id="preseed-other">
  <title>Preseeding other packages</title>

<informalexample role="example"><screen>
# Depending on what software you choose to install, or if things go wrong
# during the installation process, it's possible that other questions may
# be asked. You can preseed those too, of course. To get a list of every
# possible question that could be asked during an install, do an
# installation, and then run these commands:
#   debconf-get-selections --installer > file
#   debconf-get-selections >> file
</screen></informalexample>

  </sect2>
 </sect1>


 <sect1 id="preseed-advanced">
 <title>Advanced options</title>

  <sect2 id="preseed-hooks">
  <title>Running custom commands during the installation</title>
<para>

A very powerful and flexible option offered by the preconfiguration tools
is the ability to run commands or scripts at certain points in the
installation.

</para><para>

When the filesystem of the target system is mounted, it is available in
<filename>/target</filename>. If an installation CD is used, when it is mounted
it is available in <filename>/cdrom</filename>.

</para>

<informalexample role="example"><screen>
# d-i preseeding is inherently not secure. Nothing in the installer checks
# for attempts at buffer overflows or other exploits of the values of a
# preconfiguration file like this one. Only use preconfiguration files from
# trusted locations! To drive that home, and because it's generally useful,
# here's a way to run any shell command you'd like inside the installer,
# automatically.

# This first command is run as early as possible, just after
# preseeding is read.
#d-i preseed/early_command string anna-install some-udeb
# This command is run immediately before the partitioner starts. It may be
# useful to apply dynamic partitioner preseeding that depends on the state
# of the disks (which may not be visible when preseed/early_command runs).
#d-i partman/early_command \
#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
</screen></informalexample>

  </sect2>
  
  <sect2 id="preseed-seenflag">
  <title>Using preseeding to change default values</title>
<para>

It is possible to use preseeding to change the default answer for a
question, but still have the question asked. To do this the
<firstterm>seen</firstterm> flag must be reset to <quote>false</quote> after
setting the value for a question.

<informalexample><screen>
d-i foo/bar string value
d-i foo/bar seen false
</screen></informalexample>

The same effect can be achieved for <emphasis>all</emphasis> questions by
setting the parameter <classname>preseed/interactive=true</classname> at
the boot prompt. This can also be useful for testing or debugging your
preconfiguration file.

</para><para>

Note that the <quote>d-i</quote> owner should only be used for variables
used in the installer itself. For variables belonging to packages installed
on the target system, you should use the name of that package instead. See
the footnote to <xref linkend="preseed-bootparms"/>.

</para><para>

If you are preseeding using boot parameters, you can make the installer ask
the corresponding question by using the <quote>?=</quote> operator, i.e.
<userinput><replaceable>foo</replaceable>/<replaceable>bar</replaceable>?=<replaceable>value</replaceable></userinput>
(or <userinput><replaceable>owner</replaceable>:<replaceable>foo/bar</replaceable>?=<replaceable>value</replaceable></userinput>).
This will of course only have effect for parameters that correspond to
questions that are actually displayed during an installation and not for
<quote>internal</quote> parameters.

</para><para>

For more debugging information, use the boot parameter
<classname>DEBCONF_DEBUG=5</classname>.
This will cause <classname>debconf</classname> to print much more detail
about the current settings of each variable and about its progress through
each package's installation scripts.

</para>
  </sect2>

  <sect2 id="preseed-chainload">
  <title>Chainloading preconfiguration files</title>
<para>

It is possible to include other preconfiguration files from a preconfiguration
file. Any settings in those files will override pre-existing settings from
files loaded earlier. This makes it possible to put, for example, general
networking settings for your location in one file and more specific
settings for certain configurations in other files.

</para>

<informalexample><screen>
# More than one file can be listed, separated by spaces; all will be
# loaded. The included files can have preseed/include directives of their
# own as well. Note that if the filenames are relative, they are taken from
# the same directory as the preconfiguration file that includes them.
#d-i preseed/include string x.cfg

# The installer can optionally verify checksums of preconfiguration files
# before using them. Currently only md5sums are supported, list the md5sums
# in the same order as the list of files to include.
#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d

# More flexibly, this runs a shell command and if it outputs the names of
# preconfiguration files, includes those files. 
#d-i preseed/include_command \
#      string if [ "`hostname`" = bob ]; then echo bob.cfg; fi

# Most flexibly of all, this downloads a program and runs it. The program
# can use commands such as debconf-set to manipulate the debconf database.
# More than one script can be listed, separated by spaces.
# Note that if the filenames are relative, they are taken from the same
# directory as the preconfiguration file that runs them.
#d-i preseed/run string foo.sh
</screen></informalexample>

<para>

It is also possible to chainload from the initrd or file preseeding phase,
into network preseeding by setting preseed/url in the earlier files.
This will cause network preseeding to be performed when the network comes
up.  You need to be careful when doing this, since there will be two
distinct runs at preseeding, meaning for example that you get another
chance to run the preseed/early command, the second one happening after the
network comes up.

</para>

  </sect2>
 </sect1>
</appendix>