diff options
Diffstat (limited to 'nl/appendix/example-preseed-etch.xml')
| -rw-r--r-- | nl/appendix/example-preseed-etch.xml | 372 |
1 files changed, 372 insertions, 0 deletions
diff --git a/nl/appendix/example-preseed-etch.xml b/nl/appendix/example-preseed-etch.xml new file mode 100644 index 000000000..79d3e143f --- /dev/null +++ b/nl/appendix/example-preseed-etch.xml @@ -0,0 +1,372 @@ +<!-- retain these comments for translator revision tracking --> +<!-- original version: 30373 untranslated --> + +<informalexample condition="etch"><screen> +#### Startup. + +# To use a preseed file, you'll first need to boot the installer, +# and tell it what preseed file to use. This is done by passing the +# kernel a boot parameter, either manually at boot or by editing the +# syslinux.cfg (or similar) file and adding the parameter to the end +# of the append line(s) for the kernel. +# +# If you're netbooting, use this: +# preseed/url=http://host/path/to/preseed +# If you're remastering a CD, you could use this: +# preseed/file=/cdrom/preseed +# If you're installing from USB media, use this, and put the preseed file +# in the toplevel directory of the USB stick. +# preseed/file=/hd-media/preseed +# +# If you feel comfortable modifying the installer's initrd image, +# you can also place a preseed file in the root directory of the initrd's +# filesystem, named "preseed.cfg" -- the installer will always use this +# file if it is present. Otherwise, be sure to copy this file to the location +# you specify. +# +# To make sure the installer gets the right preseed file, you can specify +# a checksum for the file. Currently this needs to be a md5sum, and if +# specified it must match the file or the installer will refuse to use the +# file. +# preseed/url/checksum=5da499872becccfeda2c4872f9171c3d +# preseed/file/checksum=5da499872becccfeda2c4872f9171c3d +# +# Some parts of the installation process cannot be automated using +# some forms of preseeding, because the questions are asked before +# the preseed file is loaded. For example, if the preseed file is +# downloaded over the network, the network setup must be done first. +# One reason to use initrd preseeding is that it allows preseeding +# of even these early steps of the installation process. +# +# If a preseed file cannot be used to preseed some steps, the install can +# still be fully automated, since you can pass preseed values to the kernel +# on the command line. Just pass path/to/var=value for any of the preseed +# variables listed below. +# +# While you're at it, you may want to throw a debconf/priority=critical in +# there, to avoid most questions even if the preseeding below misses some. +# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit +# enter to boot the installer. +# +# Note that the 2.4 kernel accepts a maximum of 8 command line options and +# 8 environment options (including any options added by default for the +# installer). If these numbers are exceeded, 2.4 kernels will drop any +# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer, +# you can use 32 command line options and 32 environment options. +# +# Some of the default options, like 'vga=normal' may be safely removed +# for most installations, which may allow you to add more options for +# preseeding. + +# To select your language and country, use this setting, but remember +# that this will only work for initrd based preseeding, for other forms of +# preseeding you must convert it into a kernel parameter, +# such as debian-installer/locale=en_US +d-i debian-installer/locale string en_US + +# To select your keyboard, use this setting. Again it will need to be +# passed as a kernel parameter for most preseed setups. +d-i console-keymaps-at/keymap select us + +#### Network configuration. + +# Of course, this won't work if you're loading your preseed file from the +# network! But it's great if you're booting from CD or USB stick. You can +# also pass network config parameters in on the kernel params if you are +# loading preseed files from the network. + +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto + +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +#d-i netcfg/dhcp_timeout string 60 + +# If you prefer to configure the network manually, here's how: +#d-i netcfg/disable_dhcp boolean true +#d-i netcfg/get_nameservers string 192.168.1.1 +#d-i netcfg/get_ipaddress string 192.168.1.42 +#d-i netcfg/get_netmask string 255.255.255.0 +#d-i netcfg/get_gateway string 192.168.1.1 +#d-i netcfg/confirm_static boolean true + +# Note that any hostname and domain names assigned from dhcp take +# precedence over values set here. However, setting the values still +# prevents the questions from being shown even if values come from dhcp. +d-i netcfg/get_hostname string unassigned-hostname +d-i netcfg/get_domain string unassigned-domain + +# Disable that annoying WEP key dialog. +d-i netcfg/wireless_wep string +# The wacky dhcp hostname that some ISPs use as a password of sorts. +#d-i netcfg/dhcp_hostname string radish + +#### Mirror settings. + +d-i mirror/country string enter information manually +d-i mirror/http/hostname string http.us.debian.org +d-i mirror/http/directory string /debian +d-i mirror/http/proxy string + +# What suite of Debian to install. +#d-i mirror/suite string testing +# What suite of Debian to use for loading installer components. +# (Defaults to same as mirror/suite.) +#d-i mirror/udeb/suite string testing + +#### Partitioning. + +# If the system has free space you can choose to only partition that space. +#d-i partman-auto/init_automatically_partition \ +# select Use the largest continuous free space + +# Alternatively, you can specify a disk to partition. The device name can +# be given in either devfs or traditional non-devfs format. +# For example, to use the first disk devfs knows of: +d-i partman-auto/disk string /dev/discs/disc0/disc + +# You can choose from any of the predefined partitioning recipes: +d-i partman-auto/choose_recipe \ + select All files in one partition (recommended for new users) +#d-i partman-auto/choose_recipe select Desktop machine +#d-i partman-auto/choose_recipe select Multi-user workstation + +# Or provide a recipe of your own... +# The recipe format is documented in the file devel/partman-auto-recipe.txt. +# If you have a way to get a recipe file into the d-i environment, you can +# just point at it. +#d-i partman-auto/expert_recipe_file string /hd-media/recipe + +# If not, you can put an entire recipe the preseed file in one (logical) +# line. This example creates a small /boot partition, suitable swap, and +# uses the rest of the space for the root partition: +#d-i partman-auto/expert_recipe string \ +# boot-root :: \ +# 40 50 100 ext3 \ +# $primary{ } $bootable{ } \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ /boot } \ +# . \ +# 500 10000 1000000000 ext3 \ +# method{ format } format{ } \ +# use_filesystem{ } filesystem{ ext3 } \ +# mountpoint{ / } \ +# . \ +# 64 512 300% linux-swap \ +# method{ swap } format{ } \ +# . + +# This makes partman automatically partition without confirmation. +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition \ + select Finish partitioning and write changes to disk +d-i partman/confirm boolean true + +#### Boot loader installation. + +# Grub is the default boot loader (for x86). If you want lilo installed +# instead, uncomment this: +#d-i grub-installer/skip boolean true + +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean true + +# This one makes grub-installer install to the MBR if if finds some other OS +# too, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean true + +# Alternatively, if you want to install to a location other than the mbr, +# uncomment and edit these lines: +#d-i grub-installer/bootdev string (hd0,0) +#d-i grub-installer/only_debian boolean false +#d-i grub-installer/with_other_os boolean false + +#### Finishing up the first stage install. + +# Avoid that last message about the install being complete. +d-i prebaseconfig/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +#d-i cdrom-detect/eject boolean false + +#### Shell commands. + +# d-i preseeding is inherently not secure. Nothing in the installer checks +# for attempts at buffer overflows or other exploits of the values of a +# preseed file like this one. Only use preseed files from trusted +# locations! To drive that home, and because it's generally useful, here's +# a way to run any shell command you'd like inside the installer, +# automatically. + +# This first command is run as early as possible, just after +# preseeding is read. +#d-i preseed/early_command string anna-install some-udeb + +# This command is run just before the install finishes, but when there is +# still a usable /target directory. +#d-i preseed/late_command string echo foo > /target/etc/bar + +# This command is run just as base-config is starting up. +#base-config base-config/early_command string echo hi mom + +# This command is run after base-config is done, just before the login: +# prompt. This is a good way to install a set of packages you want, or to +# tweak the configuration of the system. +#base-config base-config/late_command \ +# string apt-get install zsh; chsh -s /bin/zsh + +###### Preseeding the 2nd stage of the installation. + +#### Preseeding base-config. + +# Avoid the introductory message. +base-config base-config/intro note + +# Avoid the final message. +base-config base-config/login note + +# If you installed a display manager, but don't want to start it immediately +# after base-config finishes. +#base-config base-config/start-display-manager boolean false + +# Some versions of the installer can report back on what you've installed. +# The default is not to report back, but sending reports helps the project +# determine what software is most popular and include it on CDs. +#popularity-contest popularity-contest/participate boolean false + +#### Clock and time zone setup. + +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true + +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for options. +d-i time/zone string US/Eastern + +#### Account setup. + +# To preseed the root password, you have to put it in the clear in this +# file. That is not a very good idea, use caution! +#passwd passwd/root-password password r00tme +#passwd passwd/root-password-again password r00tme + +# If you want to skip creation of a normal user account. +#passwd passwd/make-user boolean false + +# Alternatively, you can preseed the user's name and login. +#passwd passwd/user-fullname string Debian User +#passwd passwd/username string debian +# And their password, but use caution! +#passwd passwd/user-password password insecure +#passwd passwd/user-password-again password insecure + +#### Apt setup. + +# This question controls what source the second stage installation uses +# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list +# by hand +base-config apt-setup/uri_type select http + +# If you choose ftp or http, you'll be asked for a country and a mirror. +base-config apt-setup/country select enter information manually +base-config apt-setup/hostname string http.us.debian.org +base-config apt-setup/directory string /debian +# Stop after choosing one mirror. +base-config apt-setup/another boolean false + +# You can choose to install non-free and contrib software. +#base-config apt-setup/non-free boolean true +#base-config apt-setup/contrib boolean true + +# Do enable security updates. +base-config apt-setup/security-updates boolean true + +#### Package selection. + +# You can choose to install any combination of tasks that are available. +# Available tasks as of this writing include: Desktop environment, +# Web server, Print server, DNS server, File server, Mail server, +# SQL database, Laptop, Standard system, manual package selection. The +# last of those will run aptitude. You can also choose to install no +# tasks, and force the installation of a set of packages in some other +# way. We recommend always including the Standard system task. +tasksel tasksel/first multiselect Desktop environment, Standard system +#tasksel tasksel/first multiselect Web server, Standard system + +#### Mailer configuration. + +# During a normal install, exim asks only a few questions. Here's how to +# avoid even those. More complicated preseeding is possible. +exim4-config exim4/dc_eximconfig_configtype \ + select no configuration at this time +exim4-config exim4/no_config boolean true +exim4-config exim4/no_config boolean true + +# It's a good idea to set this to whatever user account you choose to +# create. Leaving the value blank results in postmaster mail going to +# /var/mail/mail. +exim4-config exim4/dc_postmaster string + +#### X Configuration. + +# Preseeding Debian's X config is possible, but you probably need to know +# some details about the video hardware of the machine, since Debian's X +# configurator does not do fully automatic configuration of everything. + +# X can detect the right driver for some cards, but if you're preseeding, +# you override whatever it chooses. Still, vesa will work most places. +#xserver-xfree86 xserver-xfree86/config/device/driver select vesa + +# A caveat with mouse autodetection is that if it fails, X will retry it +# over and over. So if it's preseeded to be done, there is a possibility of +# an infinite loop if the mouse is not autodetected. +#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true + +# Monitor autodetection is recommended. +xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true +# Uncomment if you have an LCD display. +#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true +# X has three configuration paths for the monitor. Here's how to preseed +# the "medium" path, which is always available. The "simple" path may not +# be available, and the "advanced" path asks too many questions. +xserver-xfree86 xserver-xfree86/config/monitor/selection-method \ + select medium +xserver-xfree86 xserver-xfree86/config/monitor/mode-list \ + select 1024x768 @ 60 Hz + +#### Everything else. + +# Depending on what software you choose to install, or if things go wrong +# during the installation process, it's possible that other questions may +# be asked. You can preseed those too, of course. To get a list of every +# possible question that could be asked during an install, do an +# installation, and then run these commands: +# debconf-get-selections --installer > file +# debconf-get-selections >> file + +# If you like, you can include other preseed files into this one. +# Any settings in those files will override pre-existing settings from this +# file. More that one file can be listed, separated by spaces; all will be +# loaded. The included files can have preseed/include directives of their +# own as well. Note that if the filenames are relative, they are taken from +# the same directory as the preseed file that includes them. +#d-i preseed/include string x.cfg + +# The installer can optionally verify checksums of preseed files before +# using them. Currently only md5sums are supported, list the md5sums +# in the same order as the list of files to include. +#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d + +# More flexibly, this runs a shell command and if it outputs the names of +# preseed files, includes those files. +#d-i preseed/include_command \ +# string echo if [ "`hostname`" = bob ]; then echo bob.cfg; fi + +# To check the format of your preseed file before performing an install, +# you can use debconf-set-selections: +# debconf-set-selections -c preseed.cfg +</screen></informalexample> |