11 files changed, 1333 insertions, 0 deletions
diff --git a/fi/hardware/supported/alpha.xml b/fi/hardware/supported/alpha.xml
new file mode 100644
index 000000000..02e0ad4be
--- /dev/null
+++ b/fi/hardware/supported/alpha.xml
@@ -0,0 +1,457 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28997 untranslated -->
+
+
+  <sect2 arch="alpha" id="alpha-cpus"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Complete information regarding supported DEC Alphas can be found at
+<ulink url="&url-alpha-howto;">Linux Alpha HOWTO</ulink>.  The
+purpose of this section is to describe the systems supported
+by the boot disks.
+
+</para><para>
+
+Alpha machines are subdivided into different system types because there
+are a number of generations of motherboard and supporting chipsets.
+Different systems (<quote>sub-architectures</quote>) often have radically
+different engineering and capabilities.  Therefore, the process of
+installing and, more to the point, booting, can vary from system to system.
+
+</para><para>
+
+The following table lists the system types supported by the Debian
+installation system.  The table also indicates the <emphasis>code
+name</emphasis> for these system types.  You'll need to know this code
+name when you actually begin the installation process:
+
+</para>
+
+<informaltable>
+<tgroup cols="4">
+<colspec colname="c1"/>
+<colspec colname="c2"/>
+<colspec colname="c3"/>
+<colspec colname="c4"/>
+<thead>
+<row>
+  <entry namest="c1" nameend="c2">Hardware Type</entry>
+  <entry>Aliases</entry><entry>MILO image</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry morerows="3">ALCOR</entry>
+  <entry>AlphaStation 500 5/266.300</entry>
+  <entry>Maverick</entry>
+  <entry>alcor</entry>
+</row><row>
+  <entry>AlphaStation 500 5/333...500</entry>
+  <entry>Bret</entry>
+  <entry>alcor</entry>
+</row><row>
+  <entry>AlphaStation 600/266...300</entry>
+  <entry>Alcor</entry>
+  <entry>alcor</entry>
+</row><row>
+  <entry>AlphaStation 600/300...433</entry>
+  <entry>XLT</entry>
+  <entry>xlt</entry>
+</row>
+
+<row>
+  <entry>BOOK1</entry>
+  <entry>AlphaBook1 (laptop)</entry>
+  <entry>Alphabook1/Burns</entry>
+  <entry>book1</entry>
+</row>
+
+<row>
+  <entry morerows="7">AVANTI</entry>
+  <entry>AlphaStation 200 4/100...166</entry>
+  <entry>Mustang</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 200 4/233</entry>
+  <entry>Mustang+</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 205 4/133...333</entry>
+  <entry>LX3</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 250 4/300</entry>
+  <entry>M3+</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 255 4/133...333</entry>
+  <entry>LX3+</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 300 4/266</entry>
+  <entry>Melmac</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 400 4/166</entry>
+  <entry>Chinet</entry>
+  <entry>avanti</entry>
+</row><row>
+  <entry>AlphaStation 400 4/233...300</entry>
+  <entry>Avanti</entry>
+  <entry>avanti</entry>
+</row>
+
+<row>
+  <entry morerows="3">EB164</entry>
+  <entry>AlphaPC164</entry>
+  <entry>PC164</entry>
+  <entry>pc164</entry>
+</row><row>
+  <entry>AlphaPC164-LX</entry>
+  <entry>LX164</entry>
+  <entry>lx164</entry>
+</row><row>
+  <entry>AlphaPC164-SX</entry>
+  <entry>SX164</entry>
+  <entry>sx164</entry>
+</row><row>
+  <entry>EB164</entry>
+  <entry>EB164</entry>
+  <entry>eb164</entry>
+</row>
+
+<row>
+  <entry morerows="2">EB64+</entry>
+  <entry>AlphaPC64</entry>
+  <entry>Cabriolet</entry>
+  <entry>cabriolet</entry>
+</row><row>
+  <entry>AlphaPCI64</entry>
+  <entry>Cabriolet</entry>
+  <entry>cabriolet</entry>
+</row><row>
+  <entry>EB64+</entry>
+  <entry>EB64+</entry>
+  <entry>eb64p</entry>
+</row>
+
+<row>
+  <entry morerows="1">EB66</entry>
+  <entry>EB66</entry>
+  <entry>EB66</entry>
+  <entry>eb66</entry>
+</row><row>
+  <entry>EB66+</entry>
+  <entry>EB66+</entry>
+  <entry>eb66p</entry>
+</row>
+
+<row>
+  <entry morerows="2">JENSEN</entry>
+  <entry>DEC 2000 Model 300(S)</entry>
+  <entry>Jensen</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>DEC 2000 Model 500</entry>
+  <entry>Culzen</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>DECpc 150</entry>
+  <entry>Jensen</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry morerows="7">MIATA</entry>
+  <entry>Personal WorkStation 433a</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 433au</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 466au</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 500a</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 500au</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 550au</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 600a</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row><row>
+  <entry>Personal WorkStation 600au</entry>
+  <entry>Miata</entry>
+  <entry>miata</entry>
+</row>
+
+<row>
+  <entry morerows="3">MIKASA</entry>
+  <entry>AlphaServer 1000 4/200</entry>
+  <entry>Mikasa</entry>
+  <entry>mikasa</entry>
+</row><row>
+  <entry>AlphaServer 1000 4/233..266</entry>
+  <entry>Mikasa+</entry>
+  <entry>mikasa</entry>
+</row><row>
+  <entry>AlphaServer 1000 5/300</entry>
+  <entry>Mikasa-Pinnacle</entry>
+  <entry>mikasa</entry>
+</row><row>
+  <entry>AlphaServer 1000 5/300</entry>
+  <entry>Mikasa-Primo</entry>
+  <entry>mikasa</entry>
+</row>
+
+<row>
+  <entry morerows="1">NAUTILUS</entry>
+  <entry>UP1000</entry>
+  <entry>Nautilus</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>UP1100</entry>
+  <entry>Galaxy-Train/Nautilus Jr.</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry morerows="1">NONAME</entry>
+  <entry>AXPpci33</entry>
+  <entry>Noname</entry>
+  <entry>noname</entry>
+</row><row>
+  <entry>UDB</entry>
+  <entry>Multia</entry>
+  <entry>noname</entry>
+</row>
+
+<row>
+  <entry morerows="6">NORITAKE</entry>
+  <entry>AlphaServer 1000A 4/233...266</entry>
+  <entry>Noritake</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 1000A 5/300</entry>
+  <entry>Noritake-Pinnacle</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 1000A 5/333...500</entry>
+  <entry>Noritake-Primo</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 800 5/333...500</entry>
+  <entry>Corelle</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaStation 600 A</entry>
+  <entry>Alcor-Primo</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>Digital Server 3300</entry>
+  <entry>Corelle</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>Digital Server 3300R</entry>
+  <entry>Corelle</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry>PLATFORM 2000</entry>
+  <entry>P2K</entry>
+  <entry>P2K</entry>
+  <entry>p2k</entry>
+</row>
+
+<row>
+  <entry morerows="4">RAWHIDE</entry>
+  <entry>AlphaServer 1200 5/xxx</entry>
+  <entry>Tincup/DaVinci</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 4000 5/xxx</entry>
+  <entry>Wrangler/Durango</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 4100 5/xxx</entry>
+  <entry>Dodge</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>Digital Server 5300</entry>
+  <entry>Tincup/DaVinci</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>Digital Server 7300</entry>
+  <entry>Dodge</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry morerows="5">RUFFIAN</entry>
+  <entry>DeskStation AlphaPC164-UX</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row><row>
+  <entry>DeskStation RPL164-2</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row><row>
+  <entry>DeskStation RPL164-4</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row><row>
+  <entry>DeskStation RPX164-2</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row><row>
+  <entry>DeskStation RPX164-4</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row><row>
+  <entry>Samsung AlphaPC164-BX</entry>
+  <entry>Ruffian</entry>
+  <entry>ruffian</entry>
+</row>
+
+<row>
+  <entry morerows="3">SABLE</entry>
+  <entry>AlphaServer 2000 4/xxx</entry>
+  <entry>Demi-Sable</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 2000 5/xxx</entry>
+  <entry>Demi-Gamma-Sable</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 2100 4/xxx</entry>
+  <entry>Sable</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer 2100 5/xxx</entry>
+  <entry>Gamma-Sable</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry>TAKARA</entry>
+  <entry>21164 PICMG SBC</entry>
+  <entry>Takara</entry>
+  <entry>takara</entry>
+</row>
+
+<row>
+  <entry morerows="3">TITAN</entry>
+  <entry>AlphaServer DS15</entry>
+  <entry>HyperBrick2</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer DS25</entry>
+  <entry>Granite</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer ES45</entry>
+  <entry>Privateer</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>UNKNOWN</entry>
+  <entry>Yukon</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry morerows="12">TSUNAMI</entry>
+  <entry>AlphaServer DS10</entry>
+  <entry>Webbrick</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer DS10L</entry>
+  <entry>Slate</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer DS20</entry>
+  <entry>Catamaran/Goldrush</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer DS20E</entry>
+  <entry>Goldrack</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer DS20L</entry>
+  <entry>Shark</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer ES40</entry>
+  <entry>Clipper</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>DP264</entry>
+  <entry>DP264</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>SMARTengine 21264 PCI/ISA SBC</entry>
+  <entry>Eiger</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>UNKNOWN</entry>
+  <entry>Warhol</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>UNKNOWN</entry>
+  <entry>Windjammer</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>UP2000</entry>
+  <entry>Swordfish</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>XP1000</entry>
+  <entry>Monet/Brisbane</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>XP900</entry>
+  <entry>Webbrick</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry morerows="1">WILDFIRE</entry>
+  <entry>AlphaServer GS160</entry>
+  <entry>Wildfire</entry>
+  <entry>N/A</entry>
+</row><row>
+  <entry>AlphaServer GS320</entry>
+  <entry>Wildfire</entry>
+  <entry>N/A</entry>
+</row>
+
+<row>
+  <entry>XL</entry>
+  <entry>XL-233...266</entry>
+  <entry>XL</entry>
+  <entry>xl</entry>
+</row>
+
+</tbody></tgroup></informaltable>
+
+<para>
+
+It is believed that Debian &releasename; supports installing on all
+alpha sub-architectures with the exception of the ARC-only Ruffian and
+XL sub-architectures and the Titan subarchitecture, which requires a
+change to the kernel compile options.
+
+</para>
+  </sect2>
diff --git a/fi/hardware/supported/arm.xml b/fi/hardware/supported/arm.xml
new file mode 100644
index 000000000..9ae4bef4e
--- /dev/null
+++ b/fi/hardware/supported/arm.xml
@@ -0,0 +1,95 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 25809 untranslated -->
+
+
+  <sect2 arch="arm"><title>CPU, Main Boards, and Video Support</title>
+
+<para>
+
+Each distinct ARM architecture requires its own kernel. Because of
+this the standard Debian distribution only supports installation on
+a number of the most common systems. The Debian userland however may be used by <emphasis>any</emphasis> ARM CPU including xscale.
+
+</para>
+
+<para>
+
+Most ARM CPUs may be run in either endian mode (big or little). However,
+almost every current system implementation uses little-endian mode.
+Debian currently only supports little-endian ARM systems.
+
+</para>
+
+<para>
+
+The commonly supported systems are
+
+<variablelist>
+<varlistentry>
+<term>Netwinder</term>
+<listitem><para>
+
+This is actually the name for the group of machines
+based upon the StrongARM 110 CPU and Intel 21285 Northbridge. It
+comprises of machines like: Netwinder (possibly one of the most common ARM
+boxes), CATS (also known as the EB110ATX), EBSA 285 and Compaq
+personal server (cps, aka skiff).
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>Bast</term>
+<listitem><para>
+
+This is a modern ARM 920 board with a 266MHz Samsung
+processor. It has integrated IDE, USB, Serial, Parallel, audio, video,
+flash and two ethernet ports. This system has a good bootloader which
+is also found on the CATS and Riscstation systems.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>RiscPC</term>
+<listitem><para>
+
+This machine is the oldest supported hardware: it was released
+in 1994. It has RISC OS in ROM, Linux can be booted from that OS using
+linloader. The RiscPC has a modular CPU card and typically has a 30MHz
+610, 40MHz 710 or 233MHz Strongarm 110 CPU fitted. The mainboard has
+integrated IDE, SVGA video, parallel port, single serial port, PS/2
+keyboard and proprietary mouse port. The proprietary module expansion
+bus allows for up to eight expansion cards to be fitted depending on
+configuration, several of these modules have Linux drivers.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>Riscstation</term>
+<listitem><para>
+
+This is an inexpensive 56MHz 7500FE based machine with
+integrated video, IDE, PS/2 keyboard and mouse and two serial
+ports. Its lack of processing power was made up for by its price. It
+may be found in two configurations one with RISC OS and one with a
+simple bootloader.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>LART</term>
+<listitem><para>
+
+This is a modular open hardware platform intended to be built
+by enthusiasts. To be useful to install Debian it requires its KSB
+expansion board.
+
+</para></listitem>
+</varlistentry>
+</variablelist>
+
+</para>
+  </sect2>
diff --git a/fi/hardware/supported/hppa.xml b/fi/hardware/supported/hppa.xml
new file mode 100644
index 000000000..6f3c8c8ee
--- /dev/null
+++ b/fi/hardware/supported/hppa.xml
@@ -0,0 +1,17 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 11648 untranslated -->
+
+
+  <sect2 arch="hppa"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+The are two major support <emphasis>&architecture;</emphasis> flavors:
+PA-RISC 1.1 and PA-RISC 2.0.  The PA-RISC 1.1 architecture is targeted
+at 32-bit processors whereas the 2.0 architecture is targeted to
+the 64-bit processors.  Some systems are able to run either kernel.
+In both cases, the userland is 32-bit.  There is the possibility of
+a 64-bit userland in the future.
+
+</para>
+  </sect2>
+
diff --git a/fi/hardware/supported/i386.xml b/fi/hardware/supported/i386.xml
new file mode 100644
index 000000000..725a5169b
--- /dev/null
+++ b/fi/hardware/supported/i386.xml
@@ -0,0 +1,37 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 11648 untranslated -->
+
+
+  <sect2 arch="i386"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Complete information concerning supported peripherals can be found at
+<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>.
+This section merely outlines the basics.
+
+</para>
+
+   <sect3><title>CPU</title>
+<para>
+
+Nearly all x86-based processors are supported; this includes AMD and
+VIA (former Cyrix) processors as well.  Also the new processors like
+Athlon XP and Intel P4 Xeon are supported.  However, Linux will
+<emphasis>not</emphasis> run on 286 or earlier processors.
+
+</para>
+   </sect3>
+
+   <sect3 id="bus"><title>I/O Bus</title>
+<para>
+
+The system bus is the part of the motherboard which allows the CPU to
+communicate with peripherals such as storage devices.  Your computer
+must use the ISA, EISA, PCI, the Microchannel Architecture (MCA, used
+in IBM's PS/2 line), or VESA Local Bus (VLB, sometimes called the VL
+bus).
+
+</para>
+   </sect3>
+  </sect2>
+
diff --git a/fi/hardware/supported/ia64.xml b/fi/hardware/supported/ia64.xml
new file mode 100644
index 000000000..0dabd4a41
--- /dev/null
+++ b/fi/hardware/supported/ia64.xml
@@ -0,0 +1,3 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 11648 untranslated -->
+
diff --git a/fi/hardware/supported/m68k.xml b/fi/hardware/supported/m68k.xml
new file mode 100644
index 000000000..4de0bc0f8
--- /dev/null
+++ b/fi/hardware/supported/m68k.xml
@@ -0,0 +1,39 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28997 untranslated -->
+
+  <sect2 arch="m68k"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Complete information concerning supported M68000 based
+(<emphasis>&architecture;</emphasis>) systems can be found at the
+<ulink url="&url-m68k-faq;">Linux/m68k FAQ</ulink>.  This section merely
+outlines the basics.
+
+</para><para>
+
+The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged
+Memory Management Unit) and a FPU (floating-point unit).  This
+includes the 68020 with an external 68851 PMMU, the 68030, and better,
+and excludes the <quote>EC</quote> line of 680x0 processors.  See the
+<ulink url="&url-m68k-faq;">Linux/m68k FAQ</ulink> for complete details.
+
+</para><para>
+
+There are four major flavors of supported
+<emphasis>&architecture;</emphasis> flavors: Amiga, Atari, Macintosh
+and VME machines.  Amiga and Atari were the first two systems to which
+Linux was ported; in keeping, they are also the two most
+well-supported Debian ports.  The Macintosh line is supported
+incompletely, both by Debian and by the Linux kernel; see
+<ulink url="&url-m68k-mac;">Linux m68k for Macintosh</ulink> for project
+status and supported hardware.  The BVM and Motorola single board
+VMEbus computers are the most recent addition to the list of machines
+supported by Debian.  Ports to other &architecture; architectures,
+such as the Sun3 architecture and NeXT black box, are underway but not
+yet supported by Debian.
+
+</para>
+  </sect2>
+
+
+
diff --git a/fi/hardware/supported/mips.xml b/fi/hardware/supported/mips.xml
new file mode 100644
index 000000000..7ea1a2bf7
--- /dev/null
+++ b/fi/hardware/supported/mips.xml
@@ -0,0 +1,52 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 22939 untranslated -->
+
+
+  <sect2 arch="mips"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Debian on &arch-title; currently supports two subarchitectures:
+
+<itemizedlist>
+<listitem><para>
+
+SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and
+Challenge S.  Since these machines are very similar, whenever this document
+refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well.
+
+</para></listitem>
+<listitem><para>
+
+Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from
+Broadcom based on their SiByte processor family.
+
+</para></listitem>
+</itemizedlist>
+
+Complete information regarding supported mips/mipsel machines can be found
+at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
+following, only the systems supported by the Debian installer will be
+covered.  If you are looking for support for other subarchitectures, please
+contact the <ulink url="&url-list-subscribe;">
+debian-&architecture; mailing list</ulink>.
+
+</para>
+
+   <sect3><title>CPU</title>
+<para>
+
+On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000
+processors are supported by the Debian installation system on big endian
+MIPS.  The Broadcom BCM91250A evaluation board comes with an SB1250 chip with
+two SB-1 cores which are supported in SMP mode by this installer.
+
+</para><para>
+
+Some MIPS machines can be operated in both big and little endian mode.  For
+little endian MIPS, please read the documentation for the mipsel
+architecture.
+
+</para>
+   </sect3>
+  </sect2>
+
diff --git a/fi/hardware/supported/mipsel.xml b/fi/hardware/supported/mipsel.xml
new file mode 100644
index 000000000..63d5a5bc1
--- /dev/null
+++ b/fi/hardware/supported/mipsel.xml
@@ -0,0 +1,149 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28997 untranslated -->
+
+
+  <sect2 arch="mipsel"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Debian on &arch-title; currently supports three subarchitectures:
+
+<itemizedlist>
+<listitem><para>
+
+DECstation: various models of the DECstation are supported.
+
+</para></listitem>
+<listitem><para>
+
+Cobalt Microserver: only MIPS based Cobalt machines are covered here.
+This included the Cobalt Qube, RaQ, Qube2 and RaQ2, and the Gateway
+Microserver.
+
+</para></listitem>
+<listitem><para>
+
+Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board from
+Broadcom based on their SiByte processor family.
+
+</para></listitem>
+</itemizedlist>
+
+Complete information regarding supported mips/mipsel machines can be found
+at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
+following, only the systems supported by the Debian installer will be
+covered.  If you are looking for support for other subarchitectures, please
+contact the <ulink url="&url-list-subscribe;">
+debian-&architecture; mailing list</ulink>.
+
+</para>
+
+   <sect3><title>CPU/Machine types</title>
+
+<para>
+
+Currently only DECstations with R3000 and R4000/R4400 CPUs are
+supported by the Debian installation system on little endian MIPS.
+The Debian installation system works on the following machines:
+
+</para><para>
+
+<informaltable>
+<tgroup cols="4">
+<thead>
+<row>
+  <entry>System Type</entry><entry>CPU</entry><entry>Code-name</entry>
+  <entry>Debian subarchitecture</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry>DECstation 5000/1xx</entry>
+  <entry>R3000</entry>
+  <entry>3MIN</entry>
+  <entry>r3k-kn02</entry>
+</row><row>
+  <entry>DECstation 5000/150</entry>
+  <entry>R4000</entry>
+  <entry>3MIN</entry>
+  <entry>r4k-kn04</entry>
+</row><row>
+  <entry>DECstation 5000/200</entry>
+  <entry>R3000</entry>
+  <entry>3MAX</entry>
+  <entry>r3k-kn02</entry>
+</row><row>
+  <entry>DECstation 5000/240</entry>
+  <entry>R3000</entry>
+  <entry>3MAX+</entry>
+  <entry>r3k-kn02</entry>
+</row><row>
+  <entry>DECstation 5000/260</entry>
+  <entry>R4400</entry>
+  <entry>3MAX+</entry>
+  <entry>r4k-kn04</entry>
+</row><row>
+  <entry>Personal DECstation 5000/xx</entry>
+  <entry>R3000</entry>
+  <entry>Maxine</entry>
+  <entry>r3k-kn02</entry>
+</row><row>
+  <entry>Personal DECstation 5000/50</entry>
+  <entry>R4000</entry>
+  <entry>Maxine</entry>
+  <entry>r4k-kn04</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</para><para>
+
+All Cobalt machines are supported which have a serial console (which is
+needed for the installation).
+
+</para><para>
+
+The Broadcom BCM91250A evaluation board comes with an SB1250 chip with two
+SB-1 cores which are supported in SMP mode by this installer.
+
+</para>
+   </sect3>
+
+   <sect3><title>Supported console options</title>
+<para>
+
+Serial console is available on all supported DECstations (9600 bps,
+8N1). For using serial console, you have to boot the installer image
+with the <literal>console=ttyS</literal><replaceable>x</replaceable> kernel
+parameter (with <replaceable>x</replaceable> being the number
+of the serial port you have your terminal connected to &mdash; usually
+<literal>2</literal>, but <literal>0</literal> for the Personal DECstations).
+On 3MIN and 3MAX+ (DECstation 5000/1xx, 5000/240 and 5000/260) local console
+is available with the PMAG-BA and the PMAGB-B graphics options.
+
+</para><para>
+
+If you have a Linux system to use as serial terminal, an easy way
+is to run <command>cu</command><footnote>
+
+<para>
+In Woody this command was part of the <classname>uucp</classname> package,
+but in later releases it is available as a separate package.
+</para>
+
+</footnote> on it. Example:
+
+<informalexample><screen>
+$ cu -l /dev/ttyS1 -s 9600
+</screen></informalexample>
+
+where the option <literal>-l</literal> (line) sets the serial port to use
+and <literal>-s</literal> (speed) sets the speed for the connection (9600
+bits per second).
+
+</para><para>
+
+Both Cobalt and Broadcom BCM91250A use 115200 bps.
+
+</para>
+   </sect3>
+  </sect2>
diff --git a/fi/hardware/supported/powerpc.xml b/fi/hardware/supported/powerpc.xml
new file mode 100644
index 000000000..fbc4b2f8b
--- /dev/null
+++ b/fi/hardware/supported/powerpc.xml
@@ -0,0 +1,381 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 30269 untranslated -->
+
+
+  <sect2 arch="powerpc"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+There are four major supported <emphasis>&architecture;</emphasis>
+subarchitectures: PMac (Power-Macintosh), PReP, APUS (Amiga Power-UP
+System), and CHRP machines. Each subarchitecture has its own boot
+methods. In addition, there are four different kernel flavours,
+supporting different CPU variants.
+
+</para><para>
+
+Ports to other <emphasis>&architecture;</emphasis> architectures, such
+as the Be-Box and MBX architecture, are underway but not yet supported
+by Debian. We may have a 64-bit port in the future.
+
+</para>
+
+   <sect3><title>Kernel Flavours</title>
+
+<para>
+
+There are four flavours of the powerpc kernel in Debian, based on the
+CPU type:
+
+<variablelist>
+<varlistentry>
+<term>powerpc</term>
+<listitem><para>
+
+Most systems use this kernel flavour, which supports the PowerPC 601,
+603, 604, 740, 750, and 7400 processors. All Apple Power Macintosh
+systems up to and including the G4 use one of these processors.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>power3</term>
+<listitem><para>
+
+The POWER3 processor is used in older IBM 64-bit server systems: known
+models include the IntelliStation POWER Model 265, the pSeries 610 and
+640, and the RS/6000 7044-170, 7043-260, and 7044-270.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>power4</term>
+<listitem><para>
+
+The POWER4 processor is used in more recent IBM 64-bit server systems:
+known models include the pSeries 615, 630, 650, 655, 670, and 690.
+
+</para><para>
+
+The Apple G5 is also based on the POWER4 architecture, and uses this
+kernel flavour.
+
+</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>apus</term>
+<listitem><para>
+
+This kernel flavour supports the Amiga Power-UP System.
+
+</para></listitem>
+</varlistentry>
+</variablelist>
+
+</para>
+
+   </sect3>
+
+   <sect3><title>Power Macintosh (pmac) subarchitecture</title>
+
+<para>
+
+Apple (and briefly a few other manufacturers &mdash; Power Computing, for
+example) makes a series of Macintosh computers based on the PowerPC
+processor. For purposes of architecture support, they are categorized
+as NuBus, OldWorld PCI, and NewWorld.
+
+</para><para>
+
+Macintosh computers using the 680x0 series of processors are not in
+the PowerPC family but are instead m68k machines. Those models start
+with <quote>Mac II</quote> or have a 3-digit model number such as Centris 650
+or Quadra 950. Apple's pre-iMac PowerPC model numbers have four digits.
+
+</para><para>
+
+NuBus systems are not currently supported by debian/powerpc. The
+monolithic Linux/PPC kernel architecture does not have support for
+these machines; instead, one must use the MkLinux Mach microkernel,
+which Debian does not yet support. These include the following:
+
+<itemizedlist>
+<listitem><para>
+
+Power Macintosh 6100, 7100, 8100
+
+</para></listitem>
+<listitem><para>
+
+Performa 5200, 6200, 6300
+
+</para></listitem>
+<listitem><para>
+
+Powerbook 1400, 2300, and 5300
+
+</para></listitem>
+<listitem><para>
+
+Workgroup Server 6150, 8150, 9150
+
+</para></listitem>
+</itemizedlist>
+
+A linux kernel for these machines and limited support is available at
+<ulink url="http://nubus-pmac.sourceforge.net/"></ulink>
+
+</para><para>
+
+OldWorld systems are most Power Macintoshes with a floppy drive and a
+PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are
+OldWorld machines. The beige colored G3 systems are also OldWorld.
+
+</para><para>
+
+The so called NewWorld PowerMacs are any PowerMacs in translucent
+colored plastic cases. That includes all iMacs, iBooks, G4 systems,
+blue colored G3 systems, and most PowerBooks manufactured in and after
+1999. The NewWorld PowerMacs are also known for using the <quote>ROM in
+RAM</quote> system for MacOS, and were manufactured from mid-1998 onwards.
+
+</para><para>
+
+Specifications for Apple hardware are available at
+<ulink url="http://www.info.apple.com/support/applespec.html">AppleSpec</ulink>,
+and, for older hardware,
+<ulink url="http://www.info.apple.com/support/applespec.legacy/index.html">AppleSpec Legacy</ulink>.
+
+</para><para>
+
+<informaltable>
+<tgroup cols="3">
+<colspec colname="c1"/>
+<colspec colname="c2"/>
+<colspec colname="c3"/>
+<thead>
+<row>
+  <entry namest="c1" nameend="c2">Model Name/Number</entry>
+  <entry>Generation</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry morerows="22">Apple</entry>
+  <entry>iMac Bondi Blue, 5 Flavors, Slot Loading</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>iMac Summer 2000, Early 2001</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>iMac G5</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>iBook, iBook SE, iBook Dual USB</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>iBook2</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>iBook G4</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Power Macintosh Blue and White (B&amp;W) G3</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Power Macintosh G4 PCI, AGP, Cube</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Power Macintosh G4 Gigabit Ethernet</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Power Macintosh G4 Digital Audio, Quicksilver</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Power Macintosh G5</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>PowerBook G3 FireWire Pismo (2000)</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>PowerBook G3 Lombard (1999)</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>PowerBook G4 Titanium</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>PowerBook G4 Aluminum</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Xserve G5</entry>
+  <entry>NewWorld</entry>
+</row><row>
+  <entry>Performa 4400, 54xx, 5500</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Performa 6360, 6400, 6500</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh 4400, 5400</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh 7200, 7300, 7500, 7600</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh 8200, 8500, 8600</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh 9500, 9600</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh (Beige) G3 Minitower</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Power Macintosh (Beige) Desktop, All-in-One</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>PowerBook 2400, 3400, 3500</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>PowerBook G3 Wallstreet (1998)</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Twentieth Anniversary Macintosh</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>Workgroup Server 7250, 7350, 8550, 9650, G3</entry>
+  <entry>OldWorld</entry>
+</row>
+
+<row>
+  <entry morerows="1">Power Computing</entry>
+  <entry>PowerBase, PowerTower / Pro, PowerWave</entry>
+  <entry>OldWorld</entry>
+</row><row>
+  <entry>PowerCenter / Pro, PowerCurve</entry>
+  <entry>OldWorld</entry>
+</row>
+
+<row>
+  <entry>UMAX</entry>
+  <entry>C500, C600, J700, S900</entry>
+  <entry>OldWorld</entry>
+</row>
+
+<row>
+  <entry>APS</entry>
+  <entry>APS Tech M*Power 604e/2000</entry>
+  <entry>OldWorld</entry>
+</row>
+
+<row>
+  <entry>Motorola</entry>
+  <entry>Starmax 3000, 4000, 5000, 5500</entry>
+  <entry>OldWorld</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</para>
+
+   </sect3>
+
+   <sect3><title>PReP subarchitecture</title>
+
+<para>
+
+<informaltable>
+<tgroup cols="2">
+<colspec colname="c1"/>
+<colspec colname="c2"/>
+<thead>
+<row>
+  <entry namest="c1" nameend="c2">Model Name/Number</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry morerows="4">Motorola</entry>
+  <entry>Firepower, PowerStack Series E, PowerStack II</entry>
+</row><row>
+  <entry>MPC 7xx, 8xx</entry>
+</row><row>
+  <entry>MTX, MTX+</entry>
+</row><row>
+  <entry>MVME2300(SC)/24xx/26xx/27xx/36xx/46xx</entry>
+</row><row>
+  <entry>MCP(N)750</entry>
+</row>
+
+<row>
+  <entry morerows="3">IBM RS/6000</entry>
+  <entry>40P, 43P</entry>
+</row><row>
+  <entry>Power 830/850/860 (6070, 6050)</entry>
+</row><row>
+  <entry>6030, 7025, 7043</entry>
+</row><row>
+  <entry>p640</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</para>
+
+   </sect3>
+
+   <sect3><title>CHRP subarchitecture</title>
+
+<para>
+
+<informaltable>
+<tgroup cols="2">
+<colspec colname="c1"/>
+<colspec colname="c2"/>
+<thead>
+<row>
+  <entry namest="c1" nameend="c2">Model Name/Number</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry>IBM RS/6000</entry>
+  <entry>B50, 43P-150, 44P</entry>
+</row>
+<row>
+  <entry>Genesi</entry>
+  <entry>Pegasos I, Pegasos II</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</para>
+
+   </sect3>
+
+   <sect3><title>APUS subarchitecture</title>
+
+<para>
+
+<informaltable>
+<tgroup cols="2">
+<colspec colname="c1"/>
+<colspec colname="c2"/>
+<thead>
+<row>
+  <entry namest="c1" nameend="c2">Model Name/Number</entry>
+</row>
+</thead>
+
+<tbody>
+<row>
+  <entry>Amiga Power-UP Systems (APUS)</entry>
+  <entry>A1200, A3000, A4000</entry>
+</row>
+</tbody></tgroup></informaltable>
+
+</para>
+   </sect3>
+  </sect2>
diff --git a/fi/hardware/supported/s390.xml b/fi/hardware/supported/s390.xml
new file mode 100644
index 000000000..edda7217d
--- /dev/null
+++ b/fi/hardware/supported/s390.xml
@@ -0,0 +1,21 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28672 untranslated -->
+
+
+  <sect2 arch="s390"><title>S/390 and zSeries machine types</title>
+<para>
+
+Complete information regarding supported S/390 and zSeries machines can
+be found in IBM's Redbook
+<ulink url="http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf">
+Linux for IBM eServer zSeries and S/390: Distributions</ulink> in
+chapter 2.1 or at the
+<ulink url="http://oss.software.ibm.com/developerworks/opensource/linux390/documentation-2.4.shtml">technical details web page</ulink> at
+<ulink url="http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml">developerWorks</ulink>.
+In short, G5, Multiprise 3000, G6 and all zSeries are fully supported;
+Multiprise 2000, G3 and G4 machines are supported with IEEE floating
+point emulation and thus degraded performance.
+
+</para>
+  </sect2>
+
diff --git a/fi/hardware/supported/sparc.xml b/fi/hardware/supported/sparc.xml
new file mode 100644
index 000000000..d00c6b252
--- /dev/null
+++ b/fi/hardware/supported/sparc.xml
@@ -0,0 +1,82 @@
+<!-- retain these comments for translator revision tracking -->
+<!-- original version: 28997 untranslated -->
+
+
+  <sect2 arch="sparc" id="sparc-cpus"><title>CPU, Main Boards, and Video Support</title>
+<para>
+
+Currently the <emphasis>&architecture;</emphasis> port supports
+several types of Sparc systems. The most common identifiers for Sparc
+systems are sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not
+support very old sun4 hardware. However, the other systems are
+supported. Sun4d has been tested the least of these, so expect
+possible problems with regard to the kernel stability. Sun4c and
+Sun4m, the most common of the older Sparc hardware, includes such
+systems as SparcStation 1, 1+, IPC, IPX and the SparcStation LX, 5,
+10, and 20, respectively. The UltraSPARC class systems fall under the
+sun4u identifier, and are supported using the sun4u set of install
+images. Some systems that fall under these supported identifiers are
+known to not be supported. Known unsupported systems are the AP1000
+multicomputer and the Tadpole Sparcbook 1. See the
+<ulink url="&url-sparc-linux-faq;">Linux for SPARCProcessors FAQ</ulink>
+for complete information.
+
+</para>
+
+   <sect3><title>Memory Configuration</title>
+<para>
+
+Some older Sun workstations, notably the Sun IPX and Sun IPC have
+memory banks located at fixed locations in physical memory.  Thus if
+the banks are not filled gaps will exist in the physical memory space.
+The Linux installation requires a contiguous memory block into which
+to load the kernel and the initial RAMdisk.  If this is not available a
+<quote>Data Access Exception</quote> will result.
+
+</para><para>
+
+Thus you must configure the memory so that the lowest memory block is
+contiguous for at least 8Mb.  In the IPX and IPC cited above, memory banks
+are mapped in at 16Mb boundaries.  In effect this means that you must have
+a sufficiently large SIMM in bank zero to hold the kernel and RAMdisk.
+In this case 4Mb is <emphasis>not</emphasis> sufficient.
+
+</para><para>
+
+Example:
+In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM.  There are four
+SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS
+connectors]. You must therefore install the 16Mb SIMM in bank 0; it is
+then recommended to install the 4Mb SIMM in bank 2.
+
+</para>
+   </sect3>
+
+   <sect3><title>Graphics Configuration</title>
+<para>
+
+Especially in the case of older Sun workstations, it is very common
+for there to be an onboard framebuffer which has been superseded (for
+example the bwtwo on a sun IPC), and an SBUS card containing a later
+probably accelerated buffer is then plugged in to an SBUS slot.
+Under Solaris/SunOS this causes no problems because both cards are
+initialized.
+
+</para><para>
+
+However with Linux this can cause a problem, in that the boot PROM
+monitor may display its output on this additional card; however the
+linux kernel boot messages may then be directed to the original on
+board framebuffer, leaving <emphasis>no</emphasis> error messages on
+the screen, with the machine apparently stuck loading the RAMdisk.
+
+</para><para>
+
+To avoid this problem, connect the monitor (if required) to the video
+card in the lowest numbered SBUS slot (on motherboard card counts
+as below external slots).  Alternatively it is possible to use a serial
+console.
+
+</para>
+   </sect3>
+  </sect2>