[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 138 insertions, 142 deletions

diff --git a/po/zh_TW/using-d-i.po b/po/zh_TW/using-d-i.po
index 83d931281..d4a99a3cb 100644
--- a/po/zh_TW/using-d-i.po
+++ b/po/zh_TW/using-d-i.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-07-03 23:05+0000\n"
+"POT-Creation-Date: 2019-08-10 23:04+0000\n"
 "PO-Revision-Date: 2005-07-18 14:26+0800\n"
 "Last-Translator: Jhang, Jia-Wei <dreamcrer@gmail.com>\n"
 "Language-Team: debian-chinese-big5 <debian-chinese-big5@lists.debian.org>\n"
@@ -3481,26 +3481,34 @@ msgstr "選擇鍵盤"
 #: using-d-i.xml:2475
 #, no-c-format
 msgid ""
-"If you have selected to use a network mirror during the installation "
-"(optional for CD/DVD installs, required for netboot images), you will be "
-"presented with a list of geographically nearby (and therefore hopefully "
-"fast) network mirrors, based upon your country selection earlier in the "
+"Unless you chose not to use a network mirror, you will be presented with a "
+"list of network mirrors based upon your country selection earlier in the "
 "installation process. Choosing the offered default is usually fine."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2483
+#: using-d-i.xml:2482
+#, no-c-format
+msgid ""
+"The offered default is deb.debian.org, which is not a mirror itself but will "
+"redirect to a mirror that should be up-to-date and fast. These mirrors "
+"support TLS (https protocol) and IPv6. This service is maintained by the "
+"Debian System Administration (DSA) team."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:2489
 #, no-c-format
 msgid ""
 "A mirror can also be specified by hand by choosing <quote>enter information "
 "manually</quote> . You can then specify a mirror host name and an optional "
-"port number. As of Wheezy, that actually has to be a URL base, i.e. when "
-"specifying an IPv6 address, one has to add square brackets around it, for "
-"instance <quote>[2001:db8::1]</quote>."
+"port number. This actually has to be a URL base, i.e. when specifying an "
+"IPv6 address, one has to add square brackets around it, for instance "
+"<quote>[2001:db8::1]</quote>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2491
+#: using-d-i.xml:2497
 #, no-c-format
 msgid ""
 "If your computer is on an IPv6-only network (which is probably not the case "
@@ -3516,26 +3524,14 @@ msgid ""
 "possible one."
 msgstr ""
 
-#. Tag: para
-#: using-d-i.xml:2505
-#, no-c-format
-msgid ""
-"Another option when choosing to specify the mirror manually is to use "
-"<quote>httpredir.debian.org</quote> as your mirror. <quote>httpredir.debian."
-"org</quote> is not a physical mirror but a mirror redirection service, i.e. "
-"it automatically refers your system to a real mirror near you in terms of "
-"network topology. It takes into account by which protocol you connect to it, "
-"i.e. if you use IPv6, it will refer you to an IPv6-capable mirror near you."
-msgstr ""
-
 #. Tag: title
-#: using-d-i.xml:2524
+#: using-d-i.xml:2520
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2522
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -3547,7 +3543,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2531
 #, no-c-format
 msgid ""
 "These tasks loosely represent a number of different jobs or things you want "
@@ -3565,7 +3561,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2561
+#: using-d-i.xml:2557
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
@@ -3574,7 +3570,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2568
+#: using-d-i.xml:2564
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -3582,7 +3578,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2574
+#: using-d-i.xml:2570
 #, no-c-format
 msgid ""
 "The <quote>Desktop environment</quote> task will install a graphical desktop "
@@ -3590,7 +3586,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2579
+#: using-d-i.xml:2575
 #, no-c-format
 msgid ""
 "By default, &d-i; installs the <phrase arch=\"x86\">Gnome</phrase> <phrase "
@@ -3601,7 +3597,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2587
+#: using-d-i.xml:2583
 #, no-c-format
 msgid ""
 "Note that this will only work if the packages needed for the desired desktop "
@@ -3614,7 +3610,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2597
+#: using-d-i.xml:2593
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. Web "
@@ -3623,7 +3619,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2604
+#: using-d-i.xml:2600
 #, no-c-format
 msgid ""
 "The <quote>Standard system</quote> task will install any package that has a "
@@ -3634,7 +3630,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2612
+#: using-d-i.xml:2608
 #, no-c-format
 msgid ""
 "If during language selection a default locale other than the <quote>C</"
@@ -3647,7 +3643,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2622
+#: using-d-i.xml:2618
 #, fuzzy, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -3659,7 +3655,7 @@ msgstr ""
 "<command>aptitude</command> 將安裝您選中的軟體套件。"
 
 #. Tag: para
-#: using-d-i.xml:2629
+#: using-d-i.xml:2625
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -3671,7 +3667,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2638
+#: using-d-i.xml:2634
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -3683,13 +3679,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2653
+#: using-d-i.xml:2649
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "使系統可開機"
 
 #. Tag: para
-#: using-d-i.xml:2655
+#: using-d-i.xml:2651
 #, fuzzy, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -3702,13 +3698,13 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/>。</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2670
+#: using-d-i.xml:2666
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "偵測其他的作業系統"
 
 #. Tag: para
-#: using-d-i.xml:2672
+#: using-d-i.xml:2668
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -3722,7 +3718,7 @@ msgstr ""
 "電腦也將設定為可以啟動其他作業系統。"
 
 #. Tag: para
-#: using-d-i.xml:2680
+#: using-d-i.xml:2676
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3736,13 +3732,13 @@ msgstr ""
 "boot-loader 的文件以瞭解更多資訊。"
 
 #. Tag: title
-#: using-d-i.xml:2698
+#: using-d-i.xml:2694
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2699
+#: using-d-i.xml:2695
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -3757,19 +3753,19 @@ msgstr ""
 "<command>PALO</command> 能真正地讀 Linux 分割區。"
 
 #. Tag: para
-#: using-d-i.xml:2708
+#: using-d-i.xml:2704
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2720 using-d-i.xml:2993
+#: using-d-i.xml:2716 using-d-i.xml:2989
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>Grub</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2722 using-d-i.xml:2995
+#: using-d-i.xml:2718 using-d-i.xml:2991
 #, fuzzy, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -3780,7 +3776,7 @@ msgstr ""
 "定的 boot-loader，它對新手來說是個不錯的預設選擇。對老鳥來說，它也同樣適合。"
 
 #. Tag: para
-#: using-d-i.xml:2728
+#: using-d-i.xml:2724
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -3792,7 +3788,7 @@ msgstr ""
 "訊，請參閱 grub 的手冊。"
 
 #. Tag: para
-#: using-d-i.xml:2734
+#: using-d-i.xml:2730
 #, fuzzy, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -3804,13 +3800,13 @@ msgstr ""
 "請參閱 grub 的手冊。"
 
 #. Tag: title
-#: using-d-i.xml:2747
+#: using-d-i.xml:2743
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>LILO</command> Boot Loader 到硬碟上"
 
 #. Tag: para
-#: using-d-i.xml:2749
+#: using-d-i.xml:2745
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3826,7 +3822,7 @@ msgstr ""
 "ulink>。"
 
 #. Tag: para
-#: using-d-i.xml:2759
+#: using-d-i.xml:2755
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3839,7 +3835,7 @@ msgstr ""
 "統。"
 
 #. Tag: para
-#: using-d-i.xml:2767
+#: using-d-i.xml:2763
 #, fuzzy, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -3847,13 +3843,13 @@ msgid ""
 msgstr "&d-i; 提供給您三種選擇來安裝 <command>LILO</command> boot-loader："
 
 #. Tag: term
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "主開機區 (MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3861,13 +3857,13 @@ msgid ""
 msgstr "這種方式 <command>LILO</command> 將完全控制開機過程。"
 
 #. Tag: term
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, no-c-format
 msgid "new &debian; partition"
 msgstr "新 &debian; 分割區"
 
 #. Tag: para
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3878,13 +3874,13 @@ msgstr ""
 "&debian; 分割區的起始位置，並能作為第二 boot loader。"
 
 #. Tag: term
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, no-c-format
 msgid "Other choice"
 msgstr "其它選擇"
 
 #. Tag: para
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, fuzzy, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3898,7 +3894,7 @@ msgstr ""
 "或 <filename>/dev/sda</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:2800
+#: using-d-i.xml:2796
 #, fuzzy, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3913,13 +3909,13 @@ msgstr ""
 "<xref linkend=\"reactivating-win\"/>。"
 
 #. Tag: title
-#: using-d-i.xml:2816
+#: using-d-i.xml:2812
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>ELILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2818
+#: using-d-i.xml:2814
 #, fuzzy, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3944,7 +3940,7 @@ msgstr ""
 "行以掛載和啟動 Linux 核心。"
 
 #. Tag: para
-#: using-d-i.xml:2834
+#: using-d-i.xml:2830
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3959,13 +3955,13 @@ msgstr ""
 "是與 <emphasis>root</emphasis> 檔案系統相同的磁碟。"
 
 #. Tag: title
-#: using-d-i.xml:2846
+#: using-d-i.xml:2842
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "選擇正確的分割區！"
 
 #. Tag: para
-#: using-d-i.xml:2848
+#: using-d-i.xml:2844
 #, fuzzy, no-c-format
 msgid ""
 "The criterion for selecting a partition is that it must be a FAT format "
@@ -3981,13 +3977,13 @@ msgstr ""
 "割區，這將清除以前的所有內容！"
 
 #. Tag: title
-#: using-d-i.xml:2863
+#: using-d-i.xml:2859
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI 分割區內容"
 
 #. Tag: para
-#: using-d-i.xml:2865
+#: using-d-i.xml:2861
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4013,13 +4009,13 @@ msgstr ""
 "間，系統更新或重新設定，檔案系統中也許會有其他檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2887
+#: using-d-i.xml:2883
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2888
+#: using-d-i.xml:2884
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4030,13 +4026,13 @@ msgstr ""
 "filename> 以同檔名複製到 EFI 分割區的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2897
+#: using-d-i.xml:2893
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2898
+#: using-d-i.xml:2894
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4049,13 +4045,13 @@ msgstr ""
 "<quote>EFI Boot Manager</quote> 指令選單。"
 
 #. Tag: filename
-#: using-d-i.xml:2908
+#: using-d-i.xml:2904
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2909
+#: using-d-i.xml:2905
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4068,13 +4064,13 @@ msgstr ""
 "filename> 符號鏈結 <filename>/initrd.img</filename> 指向的檔案。"
 
 #. Tag: filename
-#: using-d-i.xml:2921
+#: using-d-i.xml:2917
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2922
+#: using-d-i.xml:2918
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4085,13 +4081,13 @@ msgstr ""
 "本地修改在下次 <filename>/usr/sbin/elilo</filename> 執行時將丟失。"
 
 #. Tag: filename
-#: using-d-i.xml:2932
+#: using-d-i.xml:2928
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2933
+#: using-d-i.xml:2929
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4104,13 +4100,13 @@ msgstr ""
 "<filename>/vmlinuz</filename> 指向的檔案。"
 
 #. Tag: title
-#: using-d-i.xml:2957
+#: using-d-i.xml:2953
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "安裝 <command>Yaboot</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2958
+#: using-d-i.xml:2954
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4128,13 +4124,13 @@ msgstr ""
 "將設為啟動 &debian-gnu;。"
 
 #. Tag: title
-#: using-d-i.xml:2976
+#: using-d-i.xml:2972
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "安裝 <command>Quik</command> 至硬碟"
 
 #. Tag: para
-#: using-d-i.xml:2977
+#: using-d-i.xml:2973
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4148,7 +4144,7 @@ msgstr ""
 "作。"
 
 #. Tag: para
-#: using-d-i.xml:3001
+#: using-d-i.xml:2997
 #, fuzzy, no-c-format
 #| msgid ""
 #| "By default, grub will be installed into the Master Boot Record (MBR), "
@@ -4164,13 +4160,13 @@ msgstr ""
 "訊，請參閱 grub 的手冊。"
 
 #. Tag: title
-#: using-d-i.xml:3014
+#: using-d-i.xml:3010
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:3015
+#: using-d-i.xml:3011
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4185,13 +4181,13 @@ msgstr ""
 "Commands</quote>，它位於 IBM 的 developerWorks 網站 <command>ZIPL</command>。"
 
 #. Tag: title
-#: using-d-i.xml:3032
+#: using-d-i.xml:3028
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "安裝 <command>SILO</command> Boot Loader 到硬碟"
 
 #. Tag: para
-#: using-d-i.xml:3034
+#: using-d-i.xml:3030
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -4219,13 +4215,13 @@ msgstr ""
 "SunOS/Solaris 的系統很有用。"
 
 #. Tag: title
-#: using-d-i.xml:3059
+#: using-d-i.xml:3055
 #, no-c-format
 msgid "Making the system bootable with flash-kernel"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3060
+#: using-d-i.xml:3056
 #, no-c-format
 msgid ""
 "As there is no common firmware interface on all ARM platforms, the steps "
@@ -4238,7 +4234,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3071
+#: using-d-i.xml:3067
 #, no-c-format
 msgid ""
 "On devices which boot from internal NOR- or NAND-flash memory, flash-kernel "
@@ -4250,7 +4246,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3081
+#: using-d-i.xml:3077
 #, no-c-format
 msgid ""
 "For ARM systems that use U-Boot as their system firmware and boot the kernel "
@@ -4260,13 +4256,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3097
+#: using-d-i.xml:3093
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "不使用 boot-loader 繼續進行"
 
 #. Tag: para
-#: using-d-i.xml:3099
+#: using-d-i.xml:3095
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -4277,7 +4273,7 @@ msgstr ""
 "或是因為不想要 (例如，您想使用已經存在的 boot-loader)。"
 
 #. Tag: para
-#: using-d-i.xml:3106
+#: using-d-i.xml:3102
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -4296,13 +4292,13 @@ msgstr ""
 "filename> 到一個獨立的分割區，還需要 <filename>/boot</filename> 檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:3123
+#: using-d-i.xml:3119
 #, fuzzy, no-c-format
 msgid "Finishing the Installation"
 msgstr "完成安裝並重開機"
 
 #. Tag: para
-#: using-d-i.xml:3124
+#: using-d-i.xml:3120
 #, fuzzy, no-c-format
 msgid ""
 "This is the last step in the &debian; installation process during which the "
@@ -4311,13 +4307,13 @@ msgid ""
 msgstr "在啟動新 &debian; 之前還有一些最後工作，主要是 &d-i; 之後的整理。"
 
 #. Tag: title
-#: using-d-i.xml:3137
+#: using-d-i.xml:3133
 #, fuzzy, no-c-format
 msgid "Setting the System Clock"
 msgstr "安裝基本系統"
 
 #. Tag: para
-#: using-d-i.xml:3139
+#: using-d-i.xml:3135
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -4327,7 +4323,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3146
+#: using-d-i.xml:3142
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -4339,7 +4335,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3157
+#: using-d-i.xml:3153
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -4348,13 +4344,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3172
+#: using-d-i.xml:3168
 #, fuzzy, no-c-format
 msgid "Reboot the System"
 msgstr "安裝基本系統"
 
 #. Tag: para
-#: using-d-i.xml:3174
+#: using-d-i.xml:3170
 #, fuzzy, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -4365,7 +4361,7 @@ msgstr ""
 "軟碟等)。安裝程式將完成最後的工作，然後啟動您的新 &debian; 系統。"
 
 #. Tag: para
-#: using-d-i.xml:3180
+#: using-d-i.xml:3176
 #, fuzzy, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -4378,13 +4374,13 @@ msgstr ""
 "Linux，它在安裝步驟第一步裡被選做根檔案系統。"
 
 #. Tag: title
-#: using-d-i.xml:3193
+#: using-d-i.xml:3189
 #, no-c-format
 msgid "Troubleshooting"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3194
+#: using-d-i.xml:3190
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -4395,13 +4391,13 @@ msgstr ""
 "題。"
 
 #. Tag: title
-#: using-d-i.xml:3207
+#: using-d-i.xml:3203
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "保存安裝記錄"
 
 #. Tag: para
-#: using-d-i.xml:3209
+#: using-d-i.xml:3205
 #, fuzzy, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -4412,7 +4408,7 @@ msgstr ""
 "<filename>/var/log/debian-installer/</filename>。"
 
 #. Tag: para
-#: using-d-i.xml:3216
+#: using-d-i.xml:3212
 #, fuzzy, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -4426,13 +4422,13 @@ msgstr ""
 "用於報告的附件。"
 
 #. Tag: title
-#: using-d-i.xml:3236
+#: using-d-i.xml:3232
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "使用 Shell 查看記錄"
 
 #. Tag: para
-#: using-d-i.xml:3238
+#: using-d-i.xml:3234
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -4448,13 +4444,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3256
+#: using-d-i.xml:3252
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3260
+#: using-d-i.xml:3256
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -4465,7 +4461,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3268
+#: using-d-i.xml:3264
 #, fuzzy, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4481,7 +4477,7 @@ msgstr ""
 "shell 有一些好用的特性，如自動完成與歷史紀錄。"
 
 #. Tag: para
-#: using-d-i.xml:3277
+#: using-d-i.xml:3273
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -4490,7 +4486,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3284
+#: using-d-i.xml:3280
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -4499,7 +4495,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3290
+#: using-d-i.xml:3286
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -4509,13 +4505,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3306
+#: using-d-i.xml:3302
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3308
+#: using-d-i.xml:3304
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4527,7 +4523,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3318
+#: using-d-i.xml:3314
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4541,7 +4537,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3331
+#: using-d-i.xml:3327
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4549,7 +4545,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3336
+#: using-d-i.xml:3332
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4563,7 +4559,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3348
+#: using-d-i.xml:3344
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4572,7 +4568,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3354
+#: using-d-i.xml:3350
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4591,7 +4587,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3371
+#: using-d-i.xml:3367
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -4607,7 +4603,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3384
+#: using-d-i.xml:3380
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -4621,7 +4617,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3397
+#: using-d-i.xml:3393
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4636,7 +4632,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3413
+#: using-d-i.xml:3409
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -4649,7 +4645,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3423
+#: using-d-i.xml:3419
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -4660,13 +4656,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3442
+#: using-d-i.xml:3438
 #, no-c-format
 msgid "Loading Missing Firmware"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3443
+#: using-d-i.xml:3439
 #, no-c-format
 msgid ""
 "As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
@@ -4676,7 +4672,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3451
+#: using-d-i.xml:3447
 #, no-c-format
 msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
@@ -4688,7 +4684,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3461
+#: using-d-i.xml:3457
 #, no-c-format
 msgid ""
 "Which devices are scanned and which file systems are supported depends on "
@@ -4700,7 +4696,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3471
+#: using-d-i.xml:3467
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -4709,7 +4705,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3477
+#: using-d-i.xml:3473
 #, no-c-format
 msgid ""
 "&d-i; only prompts for firmware needed by kernel modules loaded during the "
@@ -4723,13 +4719,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3491
+#: using-d-i.xml:3487
 #, no-c-format
 msgid "Preparing a medium"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3492
+#: using-d-i.xml:3488
 #, no-c-format
 msgid ""
 "Official CD images do not include non-free firmware. The most common method "
@@ -4744,7 +4740,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3505
+#: using-d-i.xml:3501
 #, no-c-format
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
@@ -4755,7 +4751,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3519
+#: using-d-i.xml:3515
 #, no-c-format
 msgid ""
 "If the firmware you need is not included in the tarball, you can also "
@@ -4766,7 +4762,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3533
+#: using-d-i.xml:3529
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -4775,13 +4771,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3542
+#: using-d-i.xml:3538
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3543
+#: using-d-i.xml:3539
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -4793,7 +4789,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3552
+#: using-d-i.xml:3548
 #, no-c-format
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
@@ -4804,7 +4800,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3560
+#: using-d-i.xml:3556
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -4813,7 +4809,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3567
+#: using-d-i.xml:3563
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "