[SILENT_COMMIT] Update of POT and PO files for the manual

2 files changed, 190 insertions, 219 deletions

diff --git a/po/zh_CN/boot-installer.po b/po/zh_CN/boot-installer.po
index aed997c00..1e09999f0 100644
--- a/po/zh_CN/boot-installer.po
+++ b/po/zh_CN/boot-installer.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2010-04-14 00:12+0000\n"
+"POT-Creation-Date: 2010-04-19 00:12+0000\n"
 "PO-Revision-Date: 2010-04-09 14:56+0800\n"
 "Last-Translator: Ji YongGang <jungleji@gmail.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -2812,7 +2812,7 @@ msgstr ""
 "<userinput>theme=<replaceable>dark</replaceable></userinput> 设置。"
 
 #. Tag: term
-#: boot-installer.xml:2274 boot-installer.xml:2561
+#: boot-installer.xml:2274 boot-installer.xml:2505
 #, no-c-format
 msgid "netcfg/disable_dhcp"
 msgstr "netcfg/disable_dhcp"
@@ -3069,92 +3069,11 @@ msgstr ""
 #. Tag: term
 #: boot-installer.xml:2437
 #, no-c-format
-msgid "mouse/protocol"
-msgstr "mouse/protocol"
-
-#. Tag: para
-#: boot-installer.xml:2438
-#, no-c-format
-msgid ""
-"For the gtk frontend (graphical installer), users can set the mouse protocol "
-"to be used by setting this parameter. Supported values are<footnote> <para> "
-"See the man page for <citerefentry><refentrytitle>directfbrc</refentrytitle> "
-"<manvolnum>5</manvolnum></citerefentry> for additional information. </para> "
-"</footnote>: <userinput>PS/2</userinput>, <userinput>IMPS/2</userinput>, "
-"<userinput>MS</userinput>, <userinput>MS3</userinput>, <userinput>MouseMan</"
-"userinput> and <userinput>MouseSystems</userinput>. In most cases the "
-"default protocol should work correctly."
-msgstr ""
-"对于 gtk 前端 (图形安装程序)，用户可以通过设置该参数选择所使用的鼠标协议。支"
-"持的协议有<footnote> <para> 请参阅 man "
-"<citerefentry><refentrytitle>directfbrc</refentrytitle> <manvolnum>5</"
-"manvolnum></citerefentry> 了解更多信息。</para> </footnote>: "
-"<userinput>PS/2</userinput>、<userinput>IMPS/2</userinput>、<userinput>MS</"
-"userinput>、<userinput>MS3</userinput>、<userinput>MouseMan</userinput> 和 "
-"<userinput>MouseSystems</userinput>。大多数情况下，默认的协议就可以正常地工"
-"作。"
-
-#. Tag: term
-#: boot-installer.xml:2460
-#, no-c-format
-msgid "mouse/device"
-msgstr "mouse/device"
-
-#. Tag: para
-#: boot-installer.xml:2461
-#, no-c-format
-msgid ""
-"For the gtk frontend (graphical installer), users can specify the mouse "
-"device to be used by setting this parameter. This is mostly useful if the "
-"mouse is connected to a serial port (serial mouse). Example: "
-"<userinput>mouse/device=<replaceable>/dev/ttyS1</replaceable></userinput>."
-msgstr ""
-"对于 gtk 前端 (图形安装程序)，用户可以通过设置该参数指定所使用的鼠标设备。通"
-"常对通过串口 (串口鼠标) 连接的鼠标有用。例如: <userinput>mouse/"
-"device=<replaceable>/dev/ttyS1</replaceable></userinput>。"
-
-#. Tag: term
-#: boot-installer.xml:2472
-#, no-c-format
-msgid "mouse/left"
-msgstr "mouse/left"
-
-#. Tag: para
-#: boot-installer.xml:2473
-#, no-c-format
-msgid ""
-"For the gtk frontend (graphical installer), users can switch the mouse to "
-"left-handed operation by setting this parameter to <userinput>true</"
-"userinput>."
-msgstr ""
-"对于 gtk 前端(图形界面安装程序)，用户可以通过将此参数设置为 <userinput>true</"
-"userinput> 切换成左手使用鼠标。"
-
-#. Tag: term
-#: boot-installer.xml:2482
-#, no-c-format
-msgid "directfb/hw-accel"
-msgstr "directfb/hw-accel"
-
-#. Tag: para
-#: boot-installer.xml:2483
-#, no-c-format
-msgid ""
-"For the gtk frontend (graphical installer), hardware acceleration in "
-"directfb is disabled by default. Set this parameter to <userinput>true</"
-"userinput> to enable it."
-msgstr ""
-"对于 gtk 前端(图形界面安装程序)，采用 directfb 硬件加速默认是关闭的。将此参数"
-"设为 <userinput>true</userinput> 就能打开。"
-
-#. Tag: term
-#: boot-installer.xml:2493
-#, no-c-format
 msgid "rescue/enable"
 msgstr "rescue/enable"
 
 #. Tag: para
-#: boot-installer.xml:2494
+#: boot-installer.xml:2438
 #, no-c-format
 msgid ""
 "Set to <userinput>true</userinput> to enter rescue mode rather than "
@@ -3164,13 +3083,13 @@ msgstr ""
 "<xref linkend=\"rescue\"/>。"
 
 #. Tag: title
-#: boot-installer.xml:2505
+#: boot-installer.xml:2449
 #, no-c-format
 msgid "Using boot parameters to answer questions"
 msgstr "使用内核模块参数回答提问"
 
 #. Tag: para
-#: boot-installer.xml:2506
+#: boot-installer.xml:2450
 #, no-c-format
 msgid ""
 "With some exceptions, a value can be set at the boot prompt for any question "
@@ -3183,25 +3102,25 @@ msgstr ""
 "bootparms\"/> 找到。下面是一些具体的例子。"
 
 #. Tag: term
-#: boot-installer.xml:2518
+#: boot-installer.xml:2462
 #, no-c-format
 msgid "debian-installer/language (language)"
 msgstr "debian-installer/language (language)"
 
 #. Tag: term
-#: boot-installer.xml:2519
+#: boot-installer.xml:2463
 #, no-c-format
 msgid "debian-installer/country (country)"
 msgstr "debian-installer/country (country)"
 
 #. Tag: term
-#: boot-installer.xml:2520
+#: boot-installer.xml:2464
 #, no-c-format
 msgid "debian-installer/locale (locale)"
 msgstr "debian-installer/locale (locale)"
 
 #. Tag: para
-#: boot-installer.xml:2521
+#: boot-installer.xml:2465
 #, no-c-format
 msgid ""
 "There are two ways to specify the language, country and locale to use for "
@@ -3211,7 +3130,7 @@ msgstr ""
 "和地方(locale)。"
 
 #. Tag: para
-#: boot-installer.xml:2526
+#: boot-installer.xml:2470
 #, no-c-format
 msgid ""
 "The first and easiest is to pass only the parameter <literal>locale</"
@@ -3229,7 +3148,7 @@ msgstr ""
 "式组合。"
 
 #. Tag: para
-#: boot-installer.xml:2535
+#: boot-installer.xml:2479
 #, no-c-format
 msgid ""
 "The second, more flexible option is to specify <literal>language</literal> "
@@ -3244,13 +3163,13 @@ msgstr ""
 "locale=en_GB.UTF-8</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:2547
+#: boot-installer.xml:2491
 #, no-c-format
 msgid "anna/choose_modules (modules)"
 msgstr "anna/choose_modules (modules)"
 
 #. Tag: para
-#: boot-installer.xml:2548
+#: boot-installer.xml:2492
 #, no-c-format
 msgid ""
 "Can be used to automatically load installer components that are not loaded "
@@ -3265,7 +3184,7 @@ msgstr ""
 "classname> (参阅 <xref linkend=\"pppoe\"/>)</phrase>。"
 
 #. Tag: para
-#: boot-installer.xml:2562
+#: boot-installer.xml:2506
 #, no-c-format
 msgid ""
 "Set to <userinput>true</userinput> if you want to disable DHCP and instead "
@@ -3274,13 +3193,13 @@ msgstr ""
 "如果您想禁止 DHCP 使用静态网络设置，将它设为 <userinput>true</userinput>。"
 
 #. Tag: term
-#: boot-installer.xml:2571
+#: boot-installer.xml:2515
 #, no-c-format
 msgid "mirror/protocol (protocol)"
 msgstr "mirror/protocol (protocol)"
 
 #. Tag: para
-#: boot-installer.xml:2572
+#: boot-installer.xml:2516
 #, no-c-format
 msgid ""
 "By default the installer will use the http protocol to download files from "
@@ -3295,13 +3214,13 @@ msgstr ""
 "使用该协议。注意，您必须手动输入主机名，而不是从列表中选择 ftp 镜像。"
 
 #. Tag: term
-#: boot-installer.xml:2585
+#: boot-installer.xml:2529
 #, no-c-format
 msgid "tasksel:tasksel/first (tasks)"
 msgstr "tasksel:tasksel/first (tasks)"
 
 #. Tag: para
-#: boot-installer.xml:2586
+#: boot-installer.xml:2530
 #, no-c-format
 msgid ""
 "Can be used to select tasks that are not available from the interactive task "
@@ -3312,13 +3231,13 @@ msgstr ""
 "literal> 任务。参阅 <xref linkend=\"pkgsel\"/> 了解详细信息。"
 
 #. Tag: title
-#: boot-installer.xml:2600
+#: boot-installer.xml:2544
 #, no-c-format
 msgid "Passing parameters to kernel modules"
 msgstr "给内核模块传递参数"
 
 #. Tag: para
-#: boot-installer.xml:2601
+#: boot-installer.xml:2545
 #, no-c-format
 msgid ""
 "If drivers are compiled into the kernel, you can pass parameters to them as "
@@ -3338,7 +3257,7 @@ msgstr ""
 "配置中。"
 
 #. Tag: para
-#: boot-installer.xml:2614
+#: boot-installer.xml:2558
 #, no-c-format
 msgid ""
 "Note that it is now quite rare that parameters need to be passed to modules. "
@@ -3350,7 +3269,7 @@ msgstr ""
 "并很好地设置默认参数。然而，某些情况下还是需要手动设置参数。"
 
 #. Tag: para
-#: boot-installer.xml:2621
+#: boot-installer.xml:2565
 #, no-c-format
 msgid ""
 "The syntax to use to set parameters for modules is: "
@@ -3370,19 +3289,19 @@ msgstr ""
 "用："
 
 #. Tag: screen
-#: boot-installer.xml:2631
+#: boot-installer.xml:2575
 #, no-c-format
 msgid "3c509.xcvr=3 3c509.irq=10"
 msgstr "3c509.xcvr=3 3c509.irq=10"
 
 #. Tag: title
-#: boot-installer.xml:2637
+#: boot-installer.xml:2581
 #, no-c-format
 msgid "Blacklisting kernel modules"
 msgstr "内核模块黑名单"
 
 #. Tag: para
-#: boot-installer.xml:2638
+#: boot-installer.xml:2582
 #, no-c-format
 msgid ""
 "Sometimes it may be necessary to blacklist a module to prevent it from being "
@@ -3397,7 +3316,7 @@ msgstr ""
 "间冲突或者错误的驱动先加载，将造成设备无法正常工作。"
 
 #. Tag: para
-#: boot-installer.xml:2647
+#: boot-installer.xml:2591
 #, no-c-format
 msgid ""
 "You can blacklist a module using the following syntax: "
@@ -3411,7 +3330,7 @@ msgstr ""
 "入 <filename>/etc/modprobe.d/blacklist.local</filename> 文件的黑名单中。"
 
 #. Tag: para
-#: boot-installer.xml:2655
+#: boot-installer.xml:2599
 #, no-c-format
 msgid ""
 "Note that a module may still be loaded by the installation system itself. "
@@ -3423,19 +3342,19 @@ msgstr ""
 "件检查过程中从显示的模块列表中取消该模块。"
 
 #. Tag: title
-#: boot-installer.xml:2672
+#: boot-installer.xml:2616
 #, no-c-format
 msgid "Troubleshooting the Installation Process"
 msgstr "安装过程中的故障修复"
 
 #. Tag: title
-#: boot-installer.xml:2677
+#: boot-installer.xml:2621
 #, no-c-format
 msgid "CD-ROM Reliability"
 msgstr "CD-ROM 的可靠性"
 
 #. Tag: para
-#: boot-installer.xml:2678
+#: boot-installer.xml:2622
 #, no-c-format
 msgid ""
 "Sometimes, especially with older CD-ROM drives, the installer may fail to "
@@ -3447,7 +3366,7 @@ msgstr ""
 "&mdash; 即使是从 CD-ROM 成功引导 &mdash; 无法识别 CD-ROM 或在安装时读取错误。"
 
 #. Tag: para
-#: boot-installer.xml:2685
+#: boot-installer.xml:2629
 #, no-c-format
 msgid ""
 "There are many different possible causes for these problems. We can only "
@@ -3458,13 +3377,13 @@ msgstr ""
 "下的由您来处理。"
 
 #. Tag: para
-#: boot-installer.xml:2691
+#: boot-installer.xml:2635
 #, no-c-format
 msgid "There are two very simple things that you should try first."
 msgstr "您首先应试试两种最简单的方法。"
 
 #. Tag: para
-#: boot-installer.xml:2696
+#: boot-installer.xml:2640
 #, no-c-format
 msgid ""
 "If the CD-ROM does not boot, check that it was inserted correctly and that "
@@ -3472,7 +3391,7 @@ msgid ""
 msgstr "如果 CD-ROM 没有引导，检查一下它是否放好，并且没有弄脏。"
 
 #. Tag: para
-#: boot-installer.xml:2702
+#: boot-installer.xml:2646
 #, no-c-format
 msgid ""
 "If the installer fails to recognize a CD-ROM, try just running the option "
@@ -3485,7 +3404,7 @@ msgstr ""
 "的问题可以用这种方法解决。"
 
 #. Tag: para
-#: boot-installer.xml:2712
+#: boot-installer.xml:2656
 #, no-c-format
 msgid ""
 "If this does not work, then try the suggestions in the subsections below. "
@@ -3496,7 +3415,7 @@ msgstr ""
 "CD-ROM 和 DVD，为了方便，只提到 CD-ROM。"
 
 #. Tag: para
-#: boot-installer.xml:2718
+#: boot-installer.xml:2662
 #, no-c-format
 msgid ""
 "If you cannot get the installation working from CD-ROM, try one of the other "
@@ -3504,13 +3423,13 @@ msgid ""
 msgstr "如果您用 CD-ROM 无法安装，试试其他可用的安装方法。"
 
 #. Tag: title
-#: boot-installer.xml:2726
+#: boot-installer.xml:2670
 #, no-c-format
 msgid "Common issues"
 msgstr "常见问题"
 
 #. Tag: para
-#: boot-installer.xml:2729
+#: boot-installer.xml:2673
 #, no-c-format
 msgid ""
 "Some older CD-ROM drives do not support reading from discs that were burned "
@@ -3518,7 +3437,7 @@ msgid ""
 msgstr "有些老 CD-ROM 驱动器不能读取新 CD 刻录机的高速模式下刻录的光盘。"
 
 #. Tag: para
-#: boot-installer.xml:2735
+#: boot-installer.xml:2679
 #, no-c-format
 msgid ""
 "If your system boots correctly from the CD-ROM, it does not necessarily mean "
@@ -3529,7 +3448,7 @@ msgstr ""
 "准确一点，CD-ROM 驱动器所连接的控制器)。"
 
 #. Tag: para
-#: boot-installer.xml:2742
+#: boot-installer.xml:2686
 #, no-c-format
 msgid ""
 "Some older CD-ROM drives do not work correctly if <quote>direct memory "
@@ -3539,19 +3458,19 @@ msgstr ""
 "常工作。"
 
 #. Tag: title
-#: boot-installer.xml:2753
+#: boot-installer.xml:2697
 #, no-c-format
 msgid "How to investigate and maybe solve issues"
 msgstr "如何调查研究或许可以解决问题"
 
 #. Tag: para
-#: boot-installer.xml:2754
+#: boot-installer.xml:2698
 #, no-c-format
 msgid "If the CD-ROM fails to boot, try the suggestions listed below."
 msgstr "如果从 CD-ROM 引导失败，试试下面所列的建议。"
 
 #. Tag: para
-#: boot-installer.xml:2759
+#: boot-installer.xml:2703
 #, no-c-format
 msgid ""
 "Check that your BIOS actually supports booting from CD-ROM (older systems "
@@ -3561,7 +3480,7 @@ msgstr ""
 "持您所使用的介质。"
 
 #. Tag: para
-#: boot-installer.xml:2765
+#: boot-installer.xml:2709
 #, no-c-format
 msgid ""
 "If you downloaded an iso image, check that the md5sum of that image matches "
@@ -3585,7 +3504,7 @@ msgstr ""
 "用下面的命令。它使用映像的尺寸从 CD-ROM 读取正确的字节数。"
 
 #. Tag: screen
-#: boot-installer.xml:2778
+#: boot-installer.xml:2722
 #, no-c-format
 msgid ""
 "$ dd if=/dev/cdrom | \\\n"
@@ -3607,7 +3526,7 @@ msgstr ""
 "134486016 bytes (134 MB) copied, 97.474 seconds, 1.4 MB/s"
 
 #. Tag: para
-#: boot-installer.xml:2783
+#: boot-installer.xml:2727
 #, no-c-format
 msgid ""
 "If, after the installer has been booted successfully, the CD-ROM is not "
@@ -3624,7 +3543,7 @@ msgstr ""
 "Linux 知识。要执行命令，您应该首先切换到第二虚拟控制台(VT2)，并激活 shell。"
 
 #. Tag: para
-#: boot-installer.xml:2795
+#: boot-installer.xml:2739
 #, no-c-format
 msgid ""
 "Switch to VT4 or view the contents of <filename>/var/log/syslog</filename> "
@@ -3636,7 +3555,7 @@ msgstr ""
 "<command>dmesg</command> 的输出。"
 
 #. Tag: para
-#: boot-installer.xml:2802
+#: boot-installer.xml:2746
 #, no-c-format
 msgid ""
 "Check in the output of <command>dmesg</command> if your CD-ROM drive was "
@@ -3664,7 +3583,7 @@ msgstr ""
 "<command>modprobe</command> 手动加载。"
 
 #. Tag: para
-#: boot-installer.xml:2816
+#: boot-installer.xml:2760
 #, no-c-format
 msgid ""
 "Check that there is a device node for your CD-ROM drive under <filename>/dev/"
@@ -3676,7 +3595,7 @@ msgstr ""
 "cdrom0</filename>。"
 
 #. Tag: para
-#: boot-installer.xml:2824
+#: boot-installer.xml:2768
 #, no-c-format
 msgid ""
 "Use the <command>mount</command> command to check if the CD-ROM is already "
@@ -3691,7 +3610,7 @@ msgstr ""
 "</screen></informalexample> 检查命令后面是否有什么错误信息。"
 
 #. Tag: para
-#: boot-installer.xml:2834
+#: boot-installer.xml:2778
 #, no-c-format
 msgid ""
 "Check if DMA is currently enabled: <informalexample><screen>\n"
@@ -3716,7 +3635,7 @@ msgstr ""
 "</screen></informalexample> 确保您所处的目录对应 CD-ROM 驱动器。"
 
 #. Tag: para
-#: boot-installer.xml:2849
+#: boot-installer.xml:2793
 #, no-c-format
 msgid ""
 "If there are any problems during the installation, try checking the "
@@ -3728,13 +3647,13 @@ msgstr ""
 "性。如果 CD-ROM 可以读，该选项可以对其进行测试。"
 
 #. Tag: title
-#: boot-installer.xml:2864
+#: boot-installer.xml:2808
 #, no-c-format
 msgid "Floppy Disk Reliability"
 msgstr "软盘的可靠性"
 
 #. Tag: para
-#: boot-installer.xml:2866
+#: boot-installer.xml:2810
 #, no-c-format
 msgid ""
 "The biggest problem for people using floppy disks to install Debian seems to "
@@ -3743,7 +3662,7 @@ msgstr ""
 "对于用软盘安装 Debian 的人来说，他们遇到的最大的问题很可能是软盘的可靠性。"
 
 #. Tag: para
-#: boot-installer.xml:2871
+#: boot-installer.xml:2815
 #, no-c-format
 msgid ""
 "The boot floppy is the floppy with the worst problems, because it is read by "
@@ -3759,7 +3678,7 @@ msgstr ""
 "息。"
 
 #. Tag: para
-#: boot-installer.xml:2880
+#: boot-installer.xml:2824
 #, no-c-format
 msgid ""
 "If you are having the installation stall at a particular floppy, the first "
@@ -3774,7 +3693,7 @@ msgstr ""
 "化以后看起来没有错误。如果可能，在别的统上重写这些软盘更好一些。"
 
 #. Tag: para
-#: boot-installer.xml:2889
+#: boot-installer.xml:2833
 #, no-c-format
 msgid ""
 "One user reports he had to write the images to floppy <emphasis>three</"
@@ -3785,7 +3704,7 @@ msgstr ""
 "软盘才算工作良好。"
 
 #. Tag: para
-#: boot-installer.xml:2895
+#: boot-installer.xml:2839
 #, no-c-format
 msgid ""
 "Normally you should not have to download a floppy image again, but if you "
@@ -3796,7 +3715,7 @@ msgstr ""
 "来检验下载的映像是否正确。"
 
 #. Tag: para
-#: boot-installer.xml:2901
+#: boot-installer.xml:2845
 #, no-c-format
 msgid ""
 "Other users have reported that simply rebooting a few times with the same "
@@ -3807,13 +3726,13 @@ msgstr ""
 "有缺陷的硬件或固件软盘驱动器驱动程序造成的。"
 
 #. Tag: title
-#: boot-installer.xml:2910
+#: boot-installer.xml:2854
 #, no-c-format
 msgid "Boot Configuration"
 msgstr "引导配置"
 
 #. Tag: para
-#: boot-installer.xml:2912
+#: boot-installer.xml:2856
 #, no-c-format
 msgid ""
 "If you have problems and the kernel hangs during the boot process, doesn't "
@@ -3826,7 +3745,7 @@ msgstr ""
 "\"/> 讨论。"
 
 #. Tag: para
-#: boot-installer.xml:2919
+#: boot-installer.xml:2863
 #, no-c-format
 msgid ""
 "Often, problems can be solved by removing add-ons and peripherals, and then "
@@ -3837,7 +3756,7 @@ msgstr ""
 "arch=\"x86\">内置调制解调器、声卡以及即插即用设备特别容易引起问题。</phrase>"
 
 #. Tag: para
-#: boot-installer.xml:2925
+#: boot-installer.xml:2869
 #, no-c-format
 msgid ""
 "If you have a large amount of memory installed in your machine, more than "
@@ -3850,13 +3769,13 @@ msgstr ""
 "<userinput>mem=512m</userinput>。"
 
 #. Tag: title
-#: boot-installer.xml:2936 boot-installer.xml:3038
+#: boot-installer.xml:2880 boot-installer.xml:2982
 #, no-c-format
 msgid "Common &arch-title; Installation Problems"
 msgstr "&arch-title; 常见安装问题"
 
 #. Tag: para
-#: boot-installer.xml:2937
+#: boot-installer.xml:2881
 #, no-c-format
 msgid ""
 "There are some common installation problems that can be solved or avoided by "
@@ -3864,7 +3783,7 @@ msgid ""
 msgstr "有一些常见的安装问题，可以通过给安装程序特定的引导参数解决或避免。"
 
 #. Tag: para
-#: boot-installer.xml:2942
+#: boot-installer.xml:2886
 #, no-c-format
 msgid ""
 "Some systems have floppies with <quote>inverted DCLs</quote>. If you receive "
@@ -3875,7 +3794,7 @@ msgstr ""
 "息，并且知道软盘是好的，请尝试 <userinput>floppy=thinkpad</userinput> 参数。"
 
 #. Tag: para
-#: boot-installer.xml:2948
+#: boot-installer.xml:2892
 #, no-c-format
 msgid ""
 "On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506 disk "
@@ -3893,7 +3812,7 @@ msgstr ""
 "replaceable>,<replaceable>sectors</replaceable></userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:2957
+#: boot-installer.xml:2901
 #, no-c-format
 msgid ""
 "If you have a very old machine, and the kernel hangs after saying "
@@ -3906,7 +3825,7 @@ msgstr ""
 "userinput> 参数来取消这个测试。"
 
 #. Tag: para
-#: boot-installer.xml:2964
+#: boot-installer.xml:2908
 #, no-c-format
 msgid ""
 "Some systems (especially laptops) that have a native resolution that is not "
@@ -3929,7 +3848,7 @@ msgstr ""
 "boot 参数 <userinput>fb=false</userinput>。"
 
 #. Tag: para
-#: boot-installer.xml:2982
+#: boot-installer.xml:2926
 #, no-c-format
 msgid ""
 "If your screen begins to show a weird picture while the kernel boots, eg. "
@@ -3947,13 +3866,13 @@ msgstr ""
 "\"boot-parms\"/> 来获得细节信息。"
 
 #. Tag: title
-#: boot-installer.xml:2996
+#: boot-installer.xml:2940
 #, no-c-format
 msgid "System Freeze During the PCMCIA Configuration Phase"
 msgstr "在 PCMCIA 配置阶段系统停止"
 
 #. Tag: para
-#: boot-installer.xml:2997
+#: boot-installer.xml:2941
 #, no-c-format
 msgid ""
 "Some laptop models produced by Dell are known to crash when PCMCIA device "
@@ -3971,7 +3890,7 @@ msgstr ""
 "段。"
 
 #. Tag: para
-#: boot-installer.xml:3007
+#: boot-installer.xml:2951
 #, no-c-format
 msgid ""
 "Alternatively, you can boot the installer in expert mode. You will then be "
@@ -3991,13 +3910,13 @@ msgstr ""
 "项。注意您在安装程序中，输入这些值的时候必须忽略逗号。"
 
 #. Tag: title
-#: boot-installer.xml:3024
+#: boot-installer.xml:2968
 #, no-c-format
 msgid "System Freeze while Loading USB Modules"
 msgstr "在装入 USB 模块时系统停止"
 
 #. Tag: para
-#: boot-installer.xml:3025
+#: boot-installer.xml:2969
 #, no-c-format
 msgid ""
 "The kernel normally tries to install USB modules and the USB keyboard driver "
@@ -4013,19 +3932,19 @@ msgstr ""
 "<userinput>nousb</userinput> 参数。"
 
 #. Tag: para
-#: boot-installer.xml:3039
+#: boot-installer.xml:2983
 #, no-c-format
 msgid "There are some common installation problems that are worth mentioning."
 msgstr "有一些常见的安装问题值得解释一下。"
 
 #. Tag: title
-#: boot-installer.xml:3045
+#: boot-installer.xml:2989
 #, no-c-format
 msgid "Misdirected video output"
 msgstr "错误的视频输出"
 
 #. Tag: para
-#: boot-installer.xml:3046
+#: boot-installer.xml:2990
 #, no-c-format
 msgid ""
 "It is fairly common for &arch-title; to have two video cards in one machine, "
@@ -4049,7 +3968,7 @@ msgstr ""
 "<userinput>video=atyfb:off</userinput> 启动安装程序。"
 
 #. Tag: para
-#: boot-installer.xml:3060
+#: boot-installer.xml:3004
 #, no-c-format
 msgid ""
 "Note that you may also have to manually add this parameter to the silo "
@@ -4062,13 +3981,13 @@ msgstr ""
 "xorg.conf</filename> 中的视频驱动。"
 
 #. Tag: title
-#: boot-installer.xml:3071
+#: boot-installer.xml:3015
 #, no-c-format
 msgid "Failure to Boot or Install from CD-ROM"
 msgstr "从 CD-ROM 上引导或安装失败"
 
 #. Tag: para
-#: boot-installer.xml:3072
+#: boot-installer.xml:3016
 #, no-c-format
 msgid ""
 "Some Sparc systems are notoriously difficult to boot from CD-ROM and even if "
@@ -4079,19 +3998,19 @@ msgstr ""
 "费解的错误。SunBlade 系统被报告了很多问题。"
 
 #. Tag: para
-#: boot-installer.xml:3078
+#: boot-installer.xml:3022
 #, no-c-format
 msgid "We recommend to install such systems by netbooting the installer."
 msgstr "我们建议从网络安装这些系统。"
 
 #. Tag: title
-#: boot-installer.xml:3087
+#: boot-installer.xml:3031
 #, no-c-format
 msgid "Interpreting the Kernel Startup Messages"
 msgstr "内核起始信息注解"
 
 #. Tag: para
-#: boot-installer.xml:3089
+#: boot-installer.xml:3033
 #, no-c-format
 msgid ""
 "During the boot sequence, you may see many messages in the form "
@@ -4124,13 +4043,13 @@ msgstr ""
 ">)。"
 
 #. Tag: title
-#: boot-installer.xml:3114
+#: boot-installer.xml:3058
 #, no-c-format
 msgid "Reporting Installation Problems"
 msgstr "报告安装问题"
 
 #. Tag: para
-#: boot-installer.xml:3115
+#: boot-installer.xml:3059
 #, no-c-format
 msgid ""
 "If you get through the initial boot phase but cannot complete the install, "
@@ -4147,7 +4066,7 @@ msgstr ""
 "索。如果您正在提交一个 bug 报告，可以报告里附上该信息。"
 
 #. Tag: para
-#: boot-installer.xml:3126
+#: boot-installer.xml:3070
 #, no-c-format
 msgid ""
 "Other pertinent installation messages may be found in <filename>/var/log/</"
@@ -4158,13 +4077,13 @@ msgstr ""
 "新安装的系统启动后，放在 <filename>/var/log/debian-installer/</filename> 里。"
 
 #. Tag: title
-#: boot-installer.xml:3137
+#: boot-installer.xml:3081
 #, no-c-format
 msgid "Submitting Installation Reports"
 msgstr "提交缺陷报告"
 
 #. Tag: para
-#: boot-installer.xml:3138
+#: boot-installer.xml:3082
 #, no-c-format
 msgid ""
 "If you still have problems, please submit an installation report. We also "
@@ -4176,7 +4095,7 @@ msgstr ""
 "这让我们可以尽可能多地了解硬件的配置数量。"
 
 #. Tag: para
-#: boot-installer.xml:3145
+#: boot-installer.xml:3089
 #, no-c-format
 msgid ""
 "Note that your installation report will be published in the Debian Bug "
@@ -4187,7 +4106,7 @@ msgstr ""
 "件列表。确保您使用的邮件地址可以被公开。"
 
 #. Tag: para
-#: boot-installer.xml:3151
+#: boot-installer.xml:3095
 #, no-c-format
 msgid ""
 "If you have a working Debian system, the easiest way to send an installation "
@@ -4205,7 +4124,7 @@ msgstr ""
 "command> 命令。"
 
 #. Tag: para
-#: boot-installer.xml:3161
+#: boot-installer.xml:3105
 #, no-c-format
 msgid ""
 "Alternatively you can use this template when filling out installation "
@@ -4291,6 +4210,64 @@ msgstr ""
 "</screen></informalexample> 在 bug 报告中，请说明问题所在，包括内核挂起时最后"
 "见到的内核消息。描述进入问题状态所进行的步骤。"
 
+#~ msgid "mouse/protocol"
+#~ msgstr "mouse/protocol"
+
+#~ msgid ""
+#~ "For the gtk frontend (graphical installer), users can set the mouse "
+#~ "protocol to be used by setting this parameter. Supported values "
+#~ "are<footnote> <para> See the man page for "
+#~ "<citerefentry><refentrytitle>directfbrc</refentrytitle> <manvolnum>5</"
+#~ "manvolnum></citerefentry> for additional information. </para> </"
+#~ "footnote>: <userinput>PS/2</userinput>, <userinput>IMPS/2</userinput>, "
+#~ "<userinput>MS</userinput>, <userinput>MS3</userinput>, "
+#~ "<userinput>MouseMan</userinput> and <userinput>MouseSystems</userinput>. "
+#~ "In most cases the default protocol should work correctly."
+#~ msgstr ""
+#~ "对于 gtk 前端 (图形安装程序)，用户可以通过设置该参数选择所使用的鼠标协议。"
+#~ "支持的协议有<footnote> <para> 请参阅 man "
+#~ "<citerefentry><refentrytitle>directfbrc</refentrytitle> <manvolnum>5</"
+#~ "manvolnum></citerefentry> 了解更多信息。</para> </footnote>: "
+#~ "<userinput>PS/2</userinput>、<userinput>IMPS/2</userinput>、"
+#~ "<userinput>MS</userinput>、<userinput>MS3</userinput>、"
+#~ "<userinput>MouseMan</userinput> 和 <userinput>MouseSystems</userinput>。大"
+#~ "多数情况下，默认的协议就可以正常地工作。"
+
+#~ msgid "mouse/device"
+#~ msgstr "mouse/device"
+
+#~ msgid ""
+#~ "For the gtk frontend (graphical installer), users can specify the mouse "
+#~ "device to be used by setting this parameter. This is mostly useful if the "
+#~ "mouse is connected to a serial port (serial mouse). Example: "
+#~ "<userinput>mouse/device=<replaceable>/dev/ttyS1</replaceable></userinput>."
+#~ msgstr ""
+#~ "对于 gtk 前端 (图形安装程序)，用户可以通过设置该参数指定所使用的鼠标设备。"
+#~ "通常对通过串口 (串口鼠标) 连接的鼠标有用。例如: <userinput>mouse/"
+#~ "device=<replaceable>/dev/ttyS1</replaceable></userinput>。"
+
+#~ msgid "mouse/left"
+#~ msgstr "mouse/left"
+
+#~ msgid ""
+#~ "For the gtk frontend (graphical installer), users can switch the mouse to "
+#~ "left-handed operation by setting this parameter to <userinput>true</"
+#~ "userinput>."
+#~ msgstr ""
+#~ "对于 gtk 前端(图形界面安装程序)，用户可以通过将此参数设置为 "
+#~ "<userinput>true</userinput> 切换成左手使用鼠标。"
+
+#~ msgid "directfb/hw-accel"
+#~ msgstr "directfb/hw-accel"
+
+#~ msgid ""
+#~ "For the gtk frontend (graphical installer), hardware acceleration in "
+#~ "directfb is disabled by default. Set this parameter to <userinput>true</"
+#~ "userinput> to enable it."
+#~ msgstr ""
+#~ "对于 gtk 前端(图形界面安装程序)，采用 directfb 硬件加速默认是关闭的。将此"
+#~ "参数设为 <userinput>true</userinput> 就能打开。"
+
 #~ msgid ""
 #~ "The <userinput>video=vga16:off</userinput> argument may also be used to "
 #~ "disable the kernel's use of the framebuffer. Such problems have been "
diff --git a/po/zh_CN/random-bits.po b/po/zh_CN/random-bits.po
index 9be9557b4..a5dc227d5 100644
--- a/po/zh_CN/random-bits.po
+++ b/po/zh_CN/random-bits.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2009-12-28 01:10+0000\n"
+"POT-Creation-Date: 2010-04-19 00:12+0000\n"
 "PO-Revision-Date: 2010-04-07 12:18+0800\n"
 "Last-Translator: Ji YongGang <jungleji@gmail.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
@@ -2327,19 +2327,11 @@ msgstr ""
 #, no-c-format
 msgid ""
 "Just as with the regular installer it is possible to add boot parameters "
-"when starting the graphical installer. One of those parameters allows to "
-"configure the mouse for left-handed use. Others allow to select the mouse "
-"device (e.g. for a serial mouse) and the mouse protocol. See <xref linkend="
-"\"boot-parms\"/> for valid parameters<phrase arch=\"x86\"> and <xref linkend="
-"\"boot-screen\"/> for information on how to pass them</phrase>."
+"when starting the graphical installer."
 msgstr ""
-"和普通安装方式一样，图形安装程序也可以在启动的时候设置引导参数。其中的一项是"
-"设置鼠标为左手习惯。其他的是选择鼠标设备(比如，串行鼠标)和鼠标协议。请参阅 "
-"<xref linkend=\"boot-parms\"/> 了解可用的参数<phrase arch=\"x86\">，以及 "
-"<xref linkend=\"boot-screen\"/> 使用方法</phrase>。"
 
 #. Tag: para
-#: random-bits.xml:1223
+#: random-bits.xml:1219
 #, no-c-format
 msgid ""
 "The graphical installer requires significantly more memory to run than the "
@@ -2351,7 +2343,7 @@ msgstr ""
 "内存条件，它将自动回到普通的 <quote>newt</quote> 前端。"
 
 #. Tag: para
-#: random-bits.xml:1230
+#: random-bits.xml:1226
 #, no-c-format
 msgid ""
 "If the amount of memory in your system is below &minimum-memory;, the "
@@ -2363,13 +2355,13 @@ msgstr ""
 "程序可能根本无法启动。因此建议在较少内存的系统上使用普通安装程序。"
 
 #. Tag: title
-#: random-bits.xml:1240
+#: random-bits.xml:1236
 #, no-c-format
 msgid "Using the graphical installer"
 msgstr "使用图形安装程序"
 
 #. Tag: para
-#: random-bits.xml:1241
+#: random-bits.xml:1237
 #, no-c-format
 msgid ""
 "As already mentioned, the graphical installer basically works the same as "
@@ -2380,7 +2372,7 @@ msgstr ""
 "用来给您的安装过程进行指导。"
 
 #. Tag: para
-#: random-bits.xml:1247
+#: random-bits.xml:1243
 #, no-c-format
 msgid ""
 "If you prefer using the keyboard over the mouse, there are two things you "
@@ -2397,7 +2389,7 @@ msgstr ""
 "换选择，而不是激活 &BTN-CONT; 。"
 
 #. Tag: para
-#: random-bits.xml:1257
+#: random-bits.xml:1253
 #, no-c-format
 msgid ""
 "If a dialog offers additional help information, a <guibutton>Help</"
@@ -2408,7 +2400,7 @@ msgstr ""
 "帮助信息可以通过该按钮或者按下 <keycap>F1</keycap> 键。"
 
 #. Tag: para
-#: random-bits.xml:1263
+#: random-bits.xml:1259
 #, no-c-format
 msgid ""
 "To switch to another console, you will also need to use the <keycap>Ctrl</"
@@ -2425,32 +2417,34 @@ msgstr ""
 "<keycap>Ctrl</keycap> <keycap>Left Alt</keycap> <keycap>F5</keycap> </"
 "keycombo> 切换回去。"
 
-#. Tag: title
-#: random-bits.xml:1277
-#, no-c-format
-msgid "Known issues"
-msgstr "已知事项"
-
-#. Tag: para
-#: random-bits.xml:1278
-#, no-c-format
-msgid ""
-"The graphical frontend to the installer is relatively new and because of "
-"that there are some known issues. We continue to work on resolving these."
-msgstr ""
-"对于安装程序来说，图形前端相对较新还有一些已知问题。我们会持续地解决这些问"
-"题。"
-
-#. Tag: para
-#: random-bits.xml:1286
-#, no-c-format
-msgid ""
-"Information on some screens is not yet nicely formatted into columns as it "
-"should be."
-msgstr "有些画面中的信息没有很好地格式化进它该在的列中。"
-
-#. Tag: para
-#: random-bits.xml:1292
-#, no-c-format
-msgid "Support for touchpads is not yet optimal."
-msgstr "还不支持触摸板。"
+#~ msgid ""
+#~ "Just as with the regular installer it is possible to add boot parameters "
+#~ "when starting the graphical installer. One of those parameters allows to "
+#~ "configure the mouse for left-handed use. Others allow to select the mouse "
+#~ "device (e.g. for a serial mouse) and the mouse protocol. See <xref "
+#~ "linkend=\"boot-parms\"/> for valid parameters<phrase arch=\"x86\"> and "
+#~ "<xref linkend=\"boot-screen\"/> for information on how to pass them</"
+#~ "phrase>."
+#~ msgstr ""
+#~ "和普通安装方式一样，图形安装程序也可以在启动的时候设置引导参数。其中的一项"
+#~ "是设置鼠标为左手习惯。其他的是选择鼠标设备(比如，串行鼠标)和鼠标协议。请参"
+#~ "阅 <xref linkend=\"boot-parms\"/> 了解可用的参数<phrase arch=\"x86\">，以"
+#~ "及 <xref linkend=\"boot-screen\"/> 使用方法</phrase>。"
+
+#~ msgid "Known issues"
+#~ msgstr "已知事项"
+
+#~ msgid ""
+#~ "The graphical frontend to the installer is relatively new and because of "
+#~ "that there are some known issues. We continue to work on resolving these."
+#~ msgstr ""
+#~ "对于安装程序来说，图形前端相对较新还有一些已知问题。我们会持续地解决这些问"
+#~ "题。"
+
+#~ msgid ""
+#~ "Information on some screens is not yet nicely formatted into columns as "
+#~ "it should be."
+#~ msgstr "有些画面中的信息没有很好地格式化进它该在的列中。"
+
+#~ msgid "Support for touchpads is not yet optimal."
+#~ msgstr "还不支持触摸板。"