remove obsolete entries.

1 files changed, 1 insertions, 833 deletions

diff --git a/po/zh_CN/random-bits.po b/po/zh_CN/random-bits.po
index 1c9067a9d..b1f88f50d 100644
--- a/po/zh_CN/random-bits.po
+++ b/po/zh_CN/random-bits.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual\n"
 "POT-Creation-Date: 2001-02-09 01:25+0100\n"
-"PO-Revision-Date: 2005-11-25 20:56+0800\n"
+"PO-Revision-Date: 2005-12-07 18:30+0800\n"
 "Last-Translator: Ji YongGang<jungle@soforge.com>\n"
 "Language-Team: debian-chinese-gb <debian-chinese-gb@lists.debian.org>\n"
 "MIME-Version: 1.0\n"
@@ -2453,835 +2453,3 @@ msgid ""
 msgstr ""
 "Name server addresses: 您可以使用与源计算机相同的地址 (参阅 <filename>/etc/"
 "resolv.conf</filename>)"
-
-#~ msgid "The example file is also available from &urlset-example-preseed;."
-#~ msgstr "例子文件还可以从 &urlset-example-preseed; 获得。"
-
-#~ msgid ""
-#~ "#### Startup.\n"
-#~ "\n"
-#~ "# To use a preseed file, you'll first need to boot the installer,\n"
-#~ "# and tell it what preseed file to use. This is done by passing the\n"
-#~ "# kernel a boot parameter, either manually at boot or by editing the\n"
-#~ "# syslinux.cfg (or similar) file and adding the parameter to the end\n"
-#~ "# of the append line(s) for the kernel.\n"
-#~ "#\n"
-#~ "# If you're netbooting, use this:\n"
-#~ "#   preseed/url=http://host/path/to/preseed\n"
-#~ "# If you're remastering a CD, you could use this:\n"
-#~ "#   preseed/file=/cdrom/preseed\n"
-#~ "# If you're installing from USB media, use this, and put the preseed "
-#~ "file\n"
-#~ "# in the toplevel directory of the USB stick.\n"
-#~ "#   preseed/file=/hd-media/preseed\n"
-#~ "#\n"
-#~ "# If you feel comfortable modifying the installer's initrd image,\n"
-#~ "# you can also place a preseed file in the root directory of the "
-#~ "initrd's\n"
-#~ "# filesystem, named \"preseed.cfg\" -- the installer will always use "
-#~ "this\n"
-#~ "# file if it is present. Otherwise, be sure to copy this file to the "
-#~ "location\n"
-#~ "# you specify.\n"
-#~ "#\n"
-#~ "# To make sure the installer gets the right preseed file, you can "
-#~ "specify\n"
-#~ "# a checksum for the file. Currently this needs to be a md5sum, and if\n"
-#~ "# specified it must match the file or the installer will refuse to use "
-#~ "the\n"
-#~ "# file.\n"
-#~ "#   preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#   preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#\n"
-#~ "# Some parts of the installation process cannot be automated using\n"
-#~ "# some forms of preseeding, because the questions are asked before\n"
-#~ "# the preseed file is loaded. For example, if the preseed file is\n"
-#~ "# downloaded over the network, the network setup must be done first.\n"
-#~ "# One reason to use initrd preseeding is that it allows preseeding\n"
-#~ "# of even these early steps of the installation process.\n"
-#~ "#\n"
-#~ "# If a preseed file cannot be used to preseed some steps, the install "
-#~ "can\n"
-#~ "# still be fully automated, since you can pass preseed values to the "
-#~ "kernel\n"
-#~ "# on the command line. Just pass path/to/var=value for any of the "
-#~ "preseed\n"
-#~ "# variables listed below.\n"
-#~ "#\n"
-#~ "# While you're at it, you may want to throw a debconf/priority=critical "
-#~ "in\n"
-#~ "# there, to avoid most questions even if the preseeding below misses "
-#~ "some.\n"
-#~ "# And you might set the timeout to 1 in syslinux.cfg to avoid needing to "
-#~ "hit\n"
-#~ "# enter to boot the installer.\n"
-#~ "#\n"
-#~ "# Note that the 2.4 kernel accepts a maximum of 8 command line options "
-#~ "and\n"
-#~ "# 8 environment options (including any options added by default for the\n"
-#~ "# installer). If these numbers are exceeded, 2.4 kernels will drop any\n"
-#~ "# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,\n"
-#~ "# you can use 32 command line options and 32 environment options.\n"
-#~ "#\n"
-#~ "# Some of the default options, like 'vga=normal' may be safely removed\n"
-#~ "# for most installations, which may allow you to add more options for\n"
-#~ "# preseeding.\n"
-#~ "\n"
-#~ "# To select your language and country, use this setting, but remember\n"
-#~ "# that this will only work for initrd based preseeding, for other forms "
-#~ "of\n"
-#~ "# preseeding you must convert it into a kernel parameter,\n"
-#~ "# such as debian-installer/locale=en_US\n"
-#~ "d-i debian-installer/locale string en_US\n"
-#~ "\n"
-#~ "# To select your keyboard, use this setting. Again it will need to be\n"
-#~ "# passed as a kernel parameter for most preseed setups.\n"
-#~ "d-i console-keymaps-at/keymap select us\n"
-#~ "\n"
-#~ "#### Network configuration.\n"
-#~ "\n"
-#~ "# Of course, this won't work if you're loading your preseed file from "
-#~ "the\n"
-#~ "# network! But it's great if you're booting from CD or USB stick. You "
-#~ "can\n"
-#~ "# also pass network config parameters in on the kernel params if you are\n"
-#~ "# loading preseed files from the network.\n"
-#~ "\n"
-#~ "# netcfg will choose an interface that has link if possible. This makes "
-#~ "it\n"
-#~ "# skip displaying a list if there is more than one interface.\n"
-#~ "d-i netcfg/choose_interface select auto\n"
-#~ "\n"
-#~ "# If you have a slow dhcp server and the installer times out waiting for\n"
-#~ "# it, this might be useful.\n"
-#~ "#d-i netcfg/dhcp_timeout string 60\n"
-#~ "\n"
-#~ "# If you prefer to configure the network manually, here's how:\n"
-#~ "#d-i netcfg/disable_dhcp boolean true\n"
-#~ "#d-i netcfg/get_nameservers string 192.168.1.1\n"
-#~ "#d-i netcfg/get_ipaddress string 192.168.1.42\n"
-#~ "#d-i netcfg/get_netmask string 255.255.255.0\n"
-#~ "#d-i netcfg/get_gateway string 192.168.1.1\n"
-#~ "#d-i netcfg/confirm_static boolean true\n"
-#~ "\n"
-#~ "# Note that any hostname and domain names assigned from dhcp take\n"
-#~ "# precedence over values set here. However, setting the values still\n"
-#~ "# prevents the questions from being shown even if values come from dhcp.\n"
-#~ "d-i netcfg/get_hostname string unassigned-hostname\n"
-#~ "d-i netcfg/get_domain string unassigned-domain\n"
-#~ "\n"
-#~ "# Disable that annoying WEP key dialog.\n"
-#~ "d-i netcfg/wireless_wep string\n"
-#~ "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
-#~ "#d-i netcfg/dhcp_hostname string radish\n"
-#~ "\n"
-#~ "#### Mirror settings.\n"
-#~ "\n"
-#~ "d-i mirror/country string enter information manually\n"
-#~ "d-i mirror/http/hostname string http.us.debian.org\n"
-#~ "d-i mirror/http/directory string /debian\n"
-#~ "d-i mirror/http/proxy string\n"
-#~ "\n"
-#~ "# What suite of Debian to install.\n"
-#~ "#d-i mirror/suite string testing\n"
-#~ "# What suite of Debian to use for loading installer components.\n"
-#~ "# (Defaults to same as mirror/suite.)\n"
-#~ "#d-i mirror/udeb/suite string testing\n"
-#~ "\n"
-#~ "#### Partitioning.\n"
-#~ "\n"
-#~ "# If the system has free space you can choose to only partition that "
-#~ "space.\n"
-#~ "#d-i partman-auto/init_automatically_partition \\\n"
-#~ "#      select Use the largest continuous free space\n"
-#~ "\n"
-#~ "# Alternatively, you can specify a disk to partition. The device name "
-#~ "can\n"
-#~ "# be given in either devfs or traditional non-devfs format.\n"
-#~ "# For example, to use the first disk devfs knows of:\n"
-#~ "d-i partman-auto/disk string /dev/discs/disc0/disc\n"
-#~ "\n"
-#~ "# You can choose from any of the predefined partitioning recipes:\n"
-#~ "d-i partman-auto/choose_recipe \\\n"
-#~ "       select All files in one partition (recommended for new users)\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home partition\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home, /usr, /var, and /tmp partitions\n"
-#~ "\n"
-#~ "# Or provide a recipe of your own...\n"
-#~ "# The recipe format is documented in the file devel/partman-auto-recipe."
-#~ "txt.\n"
-#~ "# If you have a way to get a recipe file into the d-i environment, you "
-#~ "can\n"
-#~ "# just point at it.\n"
-#~ "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n"
-#~ "\n"
-#~ "# If not, you can put an entire recipe the preseed file in one (logical)\n"
-#~ "# line. This example creates a small /boot partition, suitable swap, and\n"
-#~ "# uses the rest of the space for the root partition:\n"
-#~ "#d-i partman-auto/expert_recipe string                         \\\n"
-#~ "#      boot-root ::                                            \\\n"
-#~ "#              40 50 100 ext3                                  \\\n"
-#~ "#                      $primary{ } $bootable{ }                \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ /boot }                     \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              500 10000 1000000000 ext3                       \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ / }                         \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              64 512 300% linux-swap                          \\\n"
-#~ "#                      method{ swap } format{ }                \\\n"
-#~ "#              .\n"
-#~ "\n"
-#~ "# This makes partman automatically partition without confirmation.\n"
-#~ "d-i partman/confirm_write_new_label boolean true\n"
-#~ "d-i partman/choose_partition \\\n"
-#~ "       select Finish partitioning and write changes to disk\n"
-#~ "d-i partman/confirm boolean true\n"
-#~ "\n"
-#~ "#### Boot loader installation.\n"
-#~ "\n"
-#~ "# Grub is the default boot loader (for x86). If you want lilo installed\n"
-#~ "# instead, uncomment this:\n"
-#~ "#d-i grub-installer/skip boolean true\n"
-#~ "\n"
-#~ "# This is fairly safe to set, it makes grub install automatically to the "
-#~ "MBR\n"
-#~ "# if no other operating system is detected on the machine.\n"
-#~ "d-i grub-installer/only_debian boolean true\n"
-#~ "\n"
-#~ "# This one makes grub-installer install to the MBR if if finds some other "
-#~ "OS\n"
-#~ "# too, which is less safe as it might not be able to boot that other OS.\n"
-#~ "d-i grub-installer/with_other_os boolean true\n"
-#~ "\n"
-#~ "# Alternatively, if you want to install to a location other than the "
-#~ "mbr,\n"
-#~ "# uncomment and edit these lines:\n"
-#~ "#d-i grub-installer/bootdev  string (hd0,0)\n"
-#~ "#d-i grub-installer/only_debian boolean false\n"
-#~ "#d-i grub-installer/with_other_os boolean false\n"
-#~ "\n"
-#~ "#### Finishing up the first stage install.\n"
-#~ "\n"
-#~ "# Avoid that last message about the install being complete.\n"
-#~ "d-i prebaseconfig/reboot_in_progress note\n"
-#~ "\n"
-#~ "# This will prevent the installer from ejecting the CD during the "
-#~ "reboot,\n"
-#~ "# which is useful in some situations.\n"
-#~ "#d-i cdrom-detect/eject boolean false\n"
-#~ "\n"
-#~ "#### Shell commands.\n"
-#~ "\n"
-#~ "# d-i preseeding is inherently not secure. Nothing in the installer "
-#~ "checks\n"
-#~ "# for attempts at buffer overflows or other exploits of the values of a\n"
-#~ "# preseed file like this one. Only use preseed files from trusted\n"
-#~ "# locations! To drive that home, and because it's generally useful, "
-#~ "here's\n"
-#~ "# a way to run any shell command you'd like inside the installer,\n"
-#~ "# automatically.\n"
-#~ "\n"
-#~ "# This first command is run as early as possible, just after\n"
-#~ "# preseeding is read.\n"
-#~ "#d-i preseed/early_command string anna-install some-udeb\n"
-#~ "\n"
-#~ "# This command is run just before the install finishes, but when there "
-#~ "is\n"
-#~ "# still a usable /target directory.\n"
-#~ "#d-i preseed/late_command string echo foo > /target/etc/bar\n"
-#~ "\n"
-#~ "# This command is run just as base-config is starting up.\n"
-#~ "#base-config base-config/early_command string echo hi mom\n"
-#~ "\n"
-#~ "# This command is run after base-config is done, just before the login:\n"
-#~ "# prompt. This is a good way to install a set of packages you want, or "
-#~ "to\n"
-#~ "# tweak the configuration of the system.\n"
-#~ "#base-config base-config/late_command \\\n"
-#~ "#      string apt-get install zsh; chsh -s /bin/zsh\n"
-#~ "\n"
-#~ "###### Preseeding the 2nd stage of the installation.\n"
-#~ "\n"
-#~ "#### Preseeding base-config.\n"
-#~ "\n"
-#~ "# Avoid the introductory message.\n"
-#~ "base-config base-config/intro note\n"
-#~ "\n"
-#~ "# Avoid the final message.\n"
-#~ "base-config base-config/login note\n"
-#~ "\n"
-#~ "# If you installed a display manager, but don't want to start it "
-#~ "immediately\n"
-#~ "# after base-config finishes.\n"
-#~ "#base-config base-config/start-display-manager boolean false\n"
-#~ "\n"
-#~ "# Some versions of the installer can report back on what you've "
-#~ "installed.\n"
-#~ "# The default is not to report back, but sending reports helps the "
-#~ "project\n"
-#~ "# determine what software is most popular and include it on CDs.\n"
-#~ "#popularity-contest popularity-contest/participate boolean false\n"
-#~ "\n"
-#~ "#### Clock and time zone setup.\n"
-#~ "\n"
-#~ "# Controls whether or not the hardware clock is set to UTC.\n"
-#~ "d-i clock-setup/utc boolean true\n"
-#~ "\n"
-#~ "# You may set this to any valid setting for $TZ; see the contents of\n"
-#~ "# /usr/share/zoneinfo/ for options.\n"
-#~ "d-i time/zone string US/Eastern\n"
-#~ "\n"
-#~ "#### Account setup.\n"
-#~ "\n"
-#~ "# To preseed the root password, you have to put it in the clear in this\n"
-#~ "# file. That is not a very good idea, use caution!\n"
-#~ "#passwd passwd/root-password password r00tme\n"
-#~ "#passwd passwd/root-password-again password r00tme\n"
-#~ "\n"
-#~ "# If you want to skip creation of a normal user account.\n"
-#~ "#passwd passwd/make-user boolean false\n"
-#~ "\n"
-#~ "# Alternatively, you can preseed the user's name and login.\n"
-#~ "#passwd passwd/user-fullname string Debian User\n"
-#~ "#passwd passwd/username string debian\n"
-#~ "# And their password, but use caution!\n"
-#~ "#passwd passwd/user-password password insecure\n"
-#~ "#passwd passwd/user-password-again password insecure\n"
-#~ "\n"
-#~ "#### Apt setup.\n"
-#~ "\n"
-#~ "# This question controls what source the second stage installation uses\n"
-#~ "# for packages. Choices are cdrom, http, ftp, filesystem, edit sources "
-#~ "list\n"
-#~ "# by hand\n"
-#~ "base-config apt-setup/uri_type select http\n"
-#~ "\n"
-#~ "# If you choose ftp or http, you'll be asked for a country and a mirror.\n"
-#~ "base-config apt-setup/country select enter information manually\n"
-#~ "base-config apt-setup/hostname string http.us.debian.org\n"
-#~ "base-config apt-setup/directory string /debian\n"
-#~ "# Stop after choosing one mirror.\n"
-#~ "base-config apt-setup/another boolean false\n"
-#~ "\n"
-#~ "# You can choose to install non-free and contrib software.\n"
-#~ "#base-config apt-setup/non-free boolean true\n"
-#~ "#base-config apt-setup/contrib boolean true\n"
-#~ "\n"
-#~ "# Do enable security updates.\n"
-#~ "base-config apt-setup/security-updates boolean true\n"
-#~ "\n"
-#~ "#### Package selection.\n"
-#~ "\n"
-#~ "# You can choose to install any combination of tasks that are available.\n"
-#~ "# Available tasks as of this writing include: Desktop environment,\n"
-#~ "# Web server, Print server, DNS server, File server, Mail server,\n"
-#~ "# SQL database, Laptop, Standard system, manual package selection. The\n"
-#~ "# last of those will run aptitude. You can also choose to install no\n"
-#~ "# tasks, and force the installation of a set of packages in some other\n"
-#~ "# way. We recommend always including the Standard system task.\n"
-#~ "tasksel tasksel/first multiselect Desktop environment, Standard system\n"
-#~ "#tasksel tasksel/first multiselect Web server, Standard system\n"
-#~ "\n"
-#~ "#### Mailer configuration.\n"
-#~ "\n"
-#~ "# During a normal install, exim asks only a few questions. Here's how to\n"
-#~ "# avoid even those. More complicated preseeding is possible.\n"
-#~ "exim4-config exim4/dc_eximconfig_configtype \\\n"
-#~ "       select no configuration at this time\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "\n"
-#~ "# It's a good idea to set this to whatever user account you choose to\n"
-#~ "# create. Leaving the value blank results in postmaster mail going to\n"
-#~ "# /var/mail/mail.\n"
-#~ "exim4-config exim4/dc_postmaster string\n"
-#~ "\n"
-#~ "#### X Configuration.\n"
-#~ "\n"
-#~ "# Preseeding Debian's X config is possible, but you probably need to "
-#~ "know\n"
-#~ "# some details about the video hardware of the machine, since Debian's X\n"
-#~ "# configurator does not do fully automatic configuration of everything.\n"
-#~ "\n"
-#~ "# X can detect the right driver for some cards, but if you're "
-#~ "preseeding,\n"
-#~ "# you override whatever it chooses. Still, vesa will work most places.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/device/driver select vesa\n"
-#~ "\n"
-#~ "# A caveat with mouse autodetection is that if it fails, X will retry it\n"
-#~ "# over and over. So if it's preseeded to be done, there is a possibility "
-#~ "of\n"
-#~ "# an infinite loop if the mouse is not autodetected.\n"
-#~ "#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true\n"
-#~ "\n"
-#~ "# Monitor autodetection is recommended.\n"
-#~ "xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true\n"
-#~ "# Uncomment if you have an LCD display.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true\n"
-#~ "# X has three configuration paths for the monitor. Here's how to preseed\n"
-#~ "# the \"medium\" path, which is always available. The \"simple\" path may "
-#~ "not\n"
-#~ "# be available, and the \"advanced\" path asks too many questions.\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/selection-method \\\n"
-#~ "       select medium\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/mode-list \\\n"
-#~ "       select 1024x768 @ 60 Hz\n"
-#~ "\n"
-#~ "#### Everything else.\n"
-#~ "\n"
-#~ "# Depending on what software you choose to install, or if things go "
-#~ "wrong\n"
-#~ "# during the installation process, it's possible that other questions "
-#~ "may\n"
-#~ "# be asked. You can preseed those too, of course. To get a list of every\n"
-#~ "# possible question that could be asked during an install, do an\n"
-#~ "# installation, and then run these commands:\n"
-#~ "#   debconf-get-selections --installer > file\n"
-#~ "#   debconf-get-selections >> file\n"
-#~ "\n"
-#~ "# If you like, you can include other preseed files into this one.\n"
-#~ "# Any settings in those files will override pre-existing settings from "
-#~ "this\n"
-#~ "# file. More that one file can be listed, separated by spaces; all will "
-#~ "be\n"
-#~ "# loaded. The included files can have preseed/include directives of "
-#~ "their\n"
-#~ "# own as well. Note that if the filenames are relative, they are taken "
-#~ "from\n"
-#~ "# the same directory as the preseed file that includes them.\n"
-#~ "#d-i preseed/include string x.cfg\n"
-#~ "\n"
-#~ "# The installer can optionally verify checksums of preseed files before\n"
-#~ "# using them. Currently only md5sums are supported, list the md5sums\n"
-#~ "# in the same order as the list of files to include.\n"
-#~ "#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n"
-#~ "\n"
-#~ "# More flexibly, this runs a shell command and if it outputs the names "
-#~ "of\n"
-#~ "# preseed files, includes those files. \n"
-#~ "#d-i preseed/include_command \\\n"
-#~ "#      string echo if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n"
-#~ "\n"
-#~ "# To check the format of your preseed file before performing an install,\n"
-#~ "# you can use debconf-set-selections:\n"
-#~ "#   debconf-set-selections -c preseed.cfg"
-#~ msgstr ""
-#~ "#### Startup.\n"
-#~ "\n"
-#~ "# To use a preseed file, you'll first need to boot the installer,\n"
-#~ "# and tell it what preseed file to use. This is done by passing the\n"
-#~ "# kernel a boot parameter, either manually at boot or by editing the\n"
-#~ "# syslinux.cfg (or similar) file and adding the parameter to the end\n"
-#~ "# of the append line(s) for the kernel.\n"
-#~ "#\n"
-#~ "# If you're netbooting, use this:\n"
-#~ "#   preseed/url=http://host/path/to/preseed\n"
-#~ "# If you're remastering a CD, you could use this:\n"
-#~ "#   preseed/file=/cdrom/preseed\n"
-#~ "# If you're installing from USB media, use this, and put the preseed "
-#~ "file\n"
-#~ "# in the toplevel directory of the USB stick.\n"
-#~ "#   preseed/file=/hd-media/preseed\n"
-#~ "#\n"
-#~ "# If you feel comfortable modifying the installer's initrd image,\n"
-#~ "# you can also place a preseed file in the root directory of the "
-#~ "initrd's\n"
-#~ "# filesystem, named \"preseed.cfg\" -- the installer will always use "
-#~ "this\n"
-#~ "# file if it is present. Otherwise, be sure to copy this file to the "
-#~ "location\n"
-#~ "# you specify.\n"
-#~ "#\n"
-#~ "# To make sure the installer gets the right preseed file, you can "
-#~ "specify\n"
-#~ "# a checksum for the file. Currently this needs to be a md5sum, and if\n"
-#~ "# specified it must match the file or the installer will refuse to use "
-#~ "the\n"
-#~ "# file.\n"
-#~ "#   preseed/url/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#   preseed/file/checksum=5da499872becccfeda2c4872f9171c3d\n"
-#~ "#\n"
-#~ "# Some parts of the installation process cannot be automated using\n"
-#~ "# some forms of preseeding, because the questions are asked before\n"
-#~ "# the preseed file is loaded. For example, if the preseed file is\n"
-#~ "# downloaded over the network, the network setup must be done first.\n"
-#~ "# One reason to use initrd preseeding is that it allows preseeding\n"
-#~ "# of even these early steps of the installation process.\n"
-#~ "#\n"
-#~ "# If a preseed file cannot be used to preseed some steps, the install "
-#~ "can\n"
-#~ "# still be fully automated, since you can pass preseed values to the "
-#~ "kernel\n"
-#~ "# on the command line. Just pass path/to/var=value for any of the "
-#~ "preseed\n"
-#~ "# variables listed below.\n"
-#~ "#\n"
-#~ "# While you're at it, you may want to throw a debconf/priority=critical "
-#~ "in\n"
-#~ "# there, to avoid most questions even if the preseeding below misses "
-#~ "some.\n"
-#~ "# And you might set the timeout to 1 in syslinux.cfg to avoid needing to "
-#~ "hit\n"
-#~ "# enter to boot the installer.\n"
-#~ "#\n"
-#~ "# Note that the 2.4 kernel accepts a maximum of 8 command line options "
-#~ "and\n"
-#~ "# 8 environment options (including any options added by default for the\n"
-#~ "# installer). If these numbers are exceeded, 2.4 kernels will drop any\n"
-#~ "# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,\n"
-#~ "# you can use 32 command line options and 32 environment options.\n"
-#~ "#\n"
-#~ "# Some of the default options, like 'vga=normal' may be safely removed\n"
-#~ "# for most installations, which may allow you to add more options for\n"
-#~ "# preseeding.\n"
-#~ "\n"
-#~ "# To select your language and country, use this setting, but remember\n"
-#~ "# that this will only work for initrd based preseeding, for other forms "
-#~ "of\n"
-#~ "# preseeding you must convert it into a kernel parameter,\n"
-#~ "# such as debian-installer/locale=en_US\n"
-#~ "d-i debian-installer/locale string en_US\n"
-#~ "\n"
-#~ "# To select your keyboard, use this setting. Again it will need to be\n"
-#~ "# passed as a kernel parameter for most preseed setups.\n"
-#~ "d-i console-keymaps-at/keymap select us\n"
-#~ "\n"
-#~ "#### Network configuration.\n"
-#~ "\n"
-#~ "# Of course, this won't work if you're loading your preseed file from "
-#~ "the\n"
-#~ "# network! But it's great if you're booting from CD or USB stick. You "
-#~ "can\n"
-#~ "# also pass network config parameters in on the kernel params if you are\n"
-#~ "# loading preseed files from the network.\n"
-#~ "\n"
-#~ "# netcfg will choose an interface that has link if possible. This makes "
-#~ "it\n"
-#~ "# skip displaying a list if there is more than one interface.\n"
-#~ "d-i netcfg/choose_interface select auto\n"
-#~ "\n"
-#~ "# If you have a slow dhcp server and the installer times out waiting for\n"
-#~ "# it, this might be useful.\n"
-#~ "#d-i netcfg/dhcp_timeout string 60\n"
-#~ "\n"
-#~ "# If you prefer to configure the network manually, here's how:\n"
-#~ "#d-i netcfg/disable_dhcp boolean true\n"
-#~ "#d-i netcfg/get_nameservers string 192.168.1.1\n"
-#~ "#d-i netcfg/get_ipaddress string 192.168.1.42\n"
-#~ "#d-i netcfg/get_netmask string 255.255.255.0\n"
-#~ "#d-i netcfg/get_gateway string 192.168.1.1\n"
-#~ "#d-i netcfg/confirm_static boolean true\n"
-#~ "\n"
-#~ "# Note that any hostname and domain names assigned from dhcp take\n"
-#~ "# precedence over values set here. However, setting the values still\n"
-#~ "# prevents the questions from being shown even if values come from dhcp.\n"
-#~ "d-i netcfg/get_hostname string unassigned-hostname\n"
-#~ "d-i netcfg/get_domain string unassigned-domain\n"
-#~ "\n"
-#~ "# Disable that annoying WEP key dialog.\n"
-#~ "d-i netcfg/wireless_wep string\n"
-#~ "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
-#~ "#d-i netcfg/dhcp_hostname string radish\n"
-#~ "\n"
-#~ "#### Mirror settings.\n"
-#~ "\n"
-#~ "d-i mirror/country string enter information manually\n"
-#~ "d-i mirror/http/hostname string http.us.debian.org\n"
-#~ "d-i mirror/http/directory string /debian\n"
-#~ "d-i mirror/http/proxy string\n"
-#~ "\n"
-#~ "# What suite of Debian to install.\n"
-#~ "#d-i mirror/suite string testing\n"
-#~ "# What suite of Debian to use for loading installer components.\n"
-#~ "# (Defaults to same as mirror/suite.)\n"
-#~ "#d-i mirror/udeb/suite string testing\n"
-#~ "\n"
-#~ "#### Partitioning.\n"
-#~ "\n"
-#~ "# If the system has free space you can choose to only partition that "
-#~ "space.\n"
-#~ "#d-i partman-auto/init_automatically_partition \\\n"
-#~ "#      select Use the largest continuous free space\n"
-#~ "\n"
-#~ "# Alternatively, you can specify a disk to partition. The device name "
-#~ "can\n"
-#~ "# be given in either devfs or traditional non-devfs format.\n"
-#~ "# For example, to use the first disk devfs knows of:\n"
-#~ "d-i partman-auto/disk string /dev/discs/disc0/disc\n"
-#~ "\n"
-#~ "# You can choose from any of the predefined partitioning recipes:\n"
-#~ "d-i partman-auto/choose_recipe \\\n"
-#~ "       select All files in one partition (recommended for new users)\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home partition\n"
-#~ "#d-i partman-auto/choose_recipe \\\n"
-#~ "#       select Separate /home, /usr, /var, and /tmp partitions\n"
-#~ "\n"
-#~ "# Or provide a recipe of your own...\n"
-#~ "# The recipe format is documented in the file devel/partman-auto-recipe."
-#~ "txt.\n"
-#~ "# If you have a way to get a recipe file into the d-i environment, you "
-#~ "can\n"
-#~ "# just point at it.\n"
-#~ "#d-i partman-auto/expert_recipe_file string /hd-media/recipe\n"
-#~ "\n"
-#~ "# If not, you can put an entire recipe the preseed file in one (logical)\n"
-#~ "# line. This example creates a small /boot partition, suitable swap, and\n"
-#~ "# uses the rest of the space for the root partition:\n"
-#~ "#d-i partman-auto/expert_recipe string                         \\\n"
-#~ "#      boot-root ::                                            \\\n"
-#~ "#              40 50 100 ext3                                  \\\n"
-#~ "#                      $primary{ } $bootable{ }                \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ /boot }                     \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              500 10000 1000000000 ext3                       \\\n"
-#~ "#                      method{ format } format{ }              \\\n"
-#~ "#                      use_filesystem{ } filesystem{ ext3 }    \\\n"
-#~ "#                      mountpoint{ / }                         \\\n"
-#~ "#              .                                               \\\n"
-#~ "#              64 512 300% linux-swap                          \\\n"
-#~ "#                      method{ swap } format{ }                \\\n"
-#~ "#              .\n"
-#~ "\n"
-#~ "# This makes partman automatically partition without confirmation.\n"
-#~ "d-i partman/confirm_write_new_label boolean true\n"
-#~ "d-i partman/choose_partition \\\n"
-#~ "       select Finish partitioning and write changes to disk\n"
-#~ "d-i partman/confirm boolean true\n"
-#~ "\n"
-#~ "#### Boot loader installation.\n"
-#~ "\n"
-#~ "# Grub is the default boot loader (for x86). If you want lilo installed\n"
-#~ "# instead, uncomment this:\n"
-#~ "#d-i grub-installer/skip boolean true\n"
-#~ "\n"
-#~ "# This is fairly safe to set, it makes grub install automatically to the "
-#~ "MBR\n"
-#~ "# if no other operating system is detected on the machine.\n"
-#~ "d-i grub-installer/only_debian boolean true\n"
-#~ "\n"
-#~ "# This one makes grub-installer install to the MBR if if finds some other "
-#~ "OS\n"
-#~ "# too, which is less safe as it might not be able to boot that other OS.\n"
-#~ "d-i grub-installer/with_other_os boolean true\n"
-#~ "\n"
-#~ "# Alternatively, if you want to install to a location other than the "
-#~ "mbr,\n"
-#~ "# uncomment and edit these lines:\n"
-#~ "#d-i grub-installer/bootdev  string (hd0,0)\n"
-#~ "#d-i grub-installer/only_debian boolean false\n"
-#~ "#d-i grub-installer/with_other_os boolean false\n"
-#~ "\n"
-#~ "#### Finishing up the first stage install.\n"
-#~ "\n"
-#~ "# Avoid that last message about the install being complete.\n"
-#~ "d-i prebaseconfig/reboot_in_progress note\n"
-#~ "\n"
-#~ "# This will prevent the installer from ejecting the CD during the "
-#~ "reboot,\n"
-#~ "# which is useful in some situations.\n"
-#~ "#d-i cdrom-detect/eject boolean false\n"
-#~ "\n"
-#~ "#### Shell commands.\n"
-#~ "\n"
-#~ "# d-i preseeding is inherently not secure. Nothing in the installer "
-#~ "checks\n"
-#~ "# for attempts at buffer overflows or other exploits of the values of a\n"
-#~ "# preseed file like this one. Only use preseed files from trusted\n"
-#~ "# locations! To drive that home, and because it's generally useful, "
-#~ "here's\n"
-#~ "# a way to run any shell command you'd like inside the installer,\n"
-#~ "# automatically.\n"
-#~ "\n"
-#~ "# This first command is run as early as possible, just after\n"
-#~ "# preseeding is read.\n"
-#~ "#d-i preseed/early_command string anna-install some-udeb\n"
-#~ "\n"
-#~ "# This command is run just before the install finishes, but when there "
-#~ "is\n"
-#~ "# still a usable /target directory.\n"
-#~ "#d-i preseed/late_command string echo foo > /target/etc/bar\n"
-#~ "\n"
-#~ "# This command is run just as base-config is starting up.\n"
-#~ "#base-config base-config/early_command string echo hi mom\n"
-#~ "\n"
-#~ "# This command is run after base-config is done, just before the login:\n"
-#~ "# prompt. This is a good way to install a set of packages you want, or "
-#~ "to\n"
-#~ "# tweak the configuration of the system.\n"
-#~ "#base-config base-config/late_command \\\n"
-#~ "#      string apt-get install zsh; chsh -s /bin/zsh\n"
-#~ "\n"
-#~ "###### Preseeding the 2nd stage of the installation.\n"
-#~ "\n"
-#~ "#### Preseeding base-config.\n"
-#~ "\n"
-#~ "# Avoid the introductory message.\n"
-#~ "base-config base-config/intro note\n"
-#~ "\n"
-#~ "# Avoid the final message.\n"
-#~ "base-config base-config/login note\n"
-#~ "\n"
-#~ "# If you installed a display manager, but don't want to start it "
-#~ "immediately\n"
-#~ "# after base-config finishes.\n"
-#~ "#base-config base-config/start-display-manager boolean false\n"
-#~ "\n"
-#~ "# Some versions of the installer can report back on what you've "
-#~ "installed.\n"
-#~ "# The default is not to report back, but sending reports helps the "
-#~ "project\n"
-#~ "# determine what software is most popular and include it on CDs.\n"
-#~ "#popularity-contest popularity-contest/participate boolean false\n"
-#~ "\n"
-#~ "#### Clock and time zone setup.\n"
-#~ "\n"
-#~ "# Controls whether or not the hardware clock is set to UTC.\n"
-#~ "d-i clock-setup/utc boolean true\n"
-#~ "\n"
-#~ "# You may set this to any valid setting for $TZ; see the contents of\n"
-#~ "# /usr/share/zoneinfo/ for options.\n"
-#~ "d-i time/zone string US/Eastern\n"
-#~ "\n"
-#~ "#### Account setup.\n"
-#~ "\n"
-#~ "# To preseed the root password, you have to put it in the clear in this\n"
-#~ "# file. That is not a very good idea, use caution!\n"
-#~ "#passwd passwd/root-password password r00tme\n"
-#~ "#passwd passwd/root-password-again password r00tme\n"
-#~ "\n"
-#~ "# If you want to skip creation of a normal user account.\n"
-#~ "#passwd passwd/make-user boolean false\n"
-#~ "\n"
-#~ "# Alternatively, you can preseed the user's name and login.\n"
-#~ "#passwd passwd/user-fullname string Debian User\n"
-#~ "#passwd passwd/username string debian\n"
-#~ "# And their password, but use caution!\n"
-#~ "#passwd passwd/user-password password insecure\n"
-#~ "#passwd passwd/user-password-again password insecure\n"
-#~ "\n"
-#~ "#### Apt setup.\n"
-#~ "\n"
-#~ "# This question controls what source the second stage installation uses\n"
-#~ "# for packages. Choices are cdrom, http, ftp, filesystem, edit sources "
-#~ "list\n"
-#~ "# by hand\n"
-#~ "base-config apt-setup/uri_type select http\n"
-#~ "\n"
-#~ "# If you choose ftp or http, you'll be asked for a country and a mirror.\n"
-#~ "base-config apt-setup/country select enter information manually\n"
-#~ "base-config apt-setup/hostname string http.us.debian.org\n"
-#~ "base-config apt-setup/directory string /debian\n"
-#~ "# Stop after choosing one mirror.\n"
-#~ "base-config apt-setup/another boolean false\n"
-#~ "\n"
-#~ "# You can choose to install non-free and contrib software.\n"
-#~ "#base-config apt-setup/non-free boolean true\n"
-#~ "#base-config apt-setup/contrib boolean true\n"
-#~ "\n"
-#~ "# Do enable security updates.\n"
-#~ "base-config apt-setup/security-updates boolean true\n"
-#~ "\n"
-#~ "#### Package selection.\n"
-#~ "\n"
-#~ "# You can choose to install any combination of tasks that are available.\n"
-#~ "# Available tasks as of this writing include: Desktop environment,\n"
-#~ "# Web server, Print server, DNS server, File server, Mail server,\n"
-#~ "# SQL database, Laptop, Standard system, manual package selection. The\n"
-#~ "# last of those will run aptitude. You can also choose to install no\n"
-#~ "# tasks, and force the installation of a set of packages in some other\n"
-#~ "# way. We recommend always including the Standard system task.\n"
-#~ "tasksel tasksel/first multiselect Desktop environment, Standard system\n"
-#~ "#tasksel tasksel/first multiselect Web server, Standard system\n"
-#~ "\n"
-#~ "#### Mailer configuration.\n"
-#~ "\n"
-#~ "# During a normal install, exim asks only a few questions. Here's how to\n"
-#~ "# avoid even those. More complicated preseeding is possible.\n"
-#~ "exim4-config exim4/dc_eximconfig_configtype \\\n"
-#~ "       select no configuration at this time\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "exim4-config exim4/no_config boolean true\n"
-#~ "\n"
-#~ "# It's a good idea to set this to whatever user account you choose to\n"
-#~ "# create. Leaving the value blank results in postmaster mail going to\n"
-#~ "# /var/mail/mail.\n"
-#~ "exim4-config exim4/dc_postmaster string\n"
-#~ "\n"
-#~ "#### X Configuration.\n"
-#~ "\n"
-#~ "# Preseeding Debian's X config is possible, but you probably need to "
-#~ "know\n"
-#~ "# some details about the video hardware of the machine, since Debian's X\n"
-#~ "# configurator does not do fully automatic configuration of everything.\n"
-#~ "\n"
-#~ "# X can detect the right driver for some cards, but if you're "
-#~ "preseeding,\n"
-#~ "# you override whatever it chooses. Still, vesa will work most places.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/device/driver select vesa\n"
-#~ "\n"
-#~ "# A caveat with mouse autodetection is that if it fails, X will retry it\n"
-#~ "# over and over. So if it's preseeded to be done, there is a possibility "
-#~ "of\n"
-#~ "# an infinite loop if the mouse is not autodetected.\n"
-#~ "#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true\n"
-#~ "\n"
-#~ "# Monitor autodetection is recommended.\n"
-#~ "xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true\n"
-#~ "# Uncomment if you have an LCD display.\n"
-#~ "#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true\n"
-#~ "# X has three configuration paths for the monitor. Here's how to preseed\n"
-#~ "# the \"medium\" path, which is always available. The \"simple\" path may "
-#~ "not\n"
-#~ "# be available, and the \"advanced\" path asks too many questions.\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/selection-method \\\n"
-#~ "       select medium\n"
-#~ "xserver-xfree86 xserver-xfree86/config/monitor/mode-list \\\n"
-#~ "       select 1024x768 @ 60 Hz\n"
-#~ "\n"
-#~ "#### Everything else.\n"
-#~ "\n"
-#~ "# Depending on what software you choose to install, or if things go "
-#~ "wrong\n"
-#~ "# during the installation process, it's possible that other questions "
-#~ "may\n"
-#~ "# be asked. You can preseed those too, of course. To get a list of every\n"
-#~ "# possible question that could be asked during an install, do an\n"
-#~ "# installation, and then run these commands:\n"
-#~ "#   debconf-get-selections --installer > file\n"
-#~ "#   debconf-get-selections >> file\n"
-#~ "\n"
-#~ "# If you like, you can include other preseed files into this one.\n"
-#~ "# Any settings in those files will override pre-existing settings from "
-#~ "this\n"
-#~ "# file. More that one file can be listed, separated by spaces; all will "
-#~ "be\n"
-#~ "# loaded. The included files can have preseed/include directives of "
-#~ "their\n"
-#~ "# own as well. Note that if the filenames are relative, they are taken "
-#~ "from\n"
-#~ "# the same directory as the preseed file that includes them.\n"
-#~ "#d-i preseed/include string x.cfg\n"
-#~ "\n"
-#~ "# The installer can optionally verify checksums of preseed files before\n"
-#~ "# using them. Currently only md5sums are supported, list the md5sums\n"
-#~ "# in the same order as the list of files to include.\n"
-#~ "#d-i preseed/include/checksum string 5da499872becccfeda2c4872f9171c3d\n"
-#~ "\n"
-#~ "# More flexibly, this runs a shell command and if it outputs the names "
-#~ "of\n"
-#~ "# preseed files, includes those files. \n"
-#~ "#d-i preseed/include_command \\\n"
-#~ "#      string echo if [ \"`hostname`\" = bob ]; then echo bob.cfg; fi\n"
-#~ "\n"
-#~ "# To check the format of your preseed file before performing an install,\n"
-#~ "# you can use debconf-set-selections:\n"
-#~ "#   debconf-set-selections -c preseed.cfg"