[SILENT_COMMIT] Update of POT and PO files for the installation-guide

2 files changed, 146 insertions, 147 deletions

diff --git a/po/uk/hardware.po b/po/uk/hardware.po
index 40b91ed9c..8d6da6fa6 100644
--- a/po/uk/hardware.po
+++ b/po/uk/hardware.po
@@ -4,7 +4,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: hardware_uk\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2023-02-15 23:04+0000\n"
+"POT-Creation-Date: 2023-08-08 23:04+0000\n"
 "PO-Revision-Date: 2022-03-07 16:56+0000\n"
 "Last-Translator: Andrij Mizyk <andmizyk@gmail.com>\n"
 "Language-Team: Ukranian\n"
@@ -1857,44 +1857,9 @@ msgstr "Вимоги до памʼяті та дискового простор�
 #: hardware.xml:1957
 #, no-c-format
 msgid ""
-"You must have at least &minimum-memory; of memory and &minimum-fs-size; of "
-"hard disk space to perform a normal installation. Note that these are fairly "
-"minimal numbers. For more realistic figures, see <xref linkend=\"minimum-"
-"hardware-reqts\"/>."
-msgstr ""
-
-#. Tag: para
-#: hardware.xml:1964
-#, no-c-format
-msgid ""
-"The installer normally automatically enables memory-saving tricks to be able "
-"to run on such low-memory system, but on architectures that are less tested "
-"it may miss doing so. It can however be enabled manually by appending the "
-"<userinput>lowmem=1</userinput> or even <userinput>lowmem=2</userinput> boot "
-"parameter (see also <xref linkend=\"lowmem\"/> and <xref linkend=\"installer-"
-"args\"/>)."
-msgstr ""
-
-#. Tag: para
-#: hardware.xml:1973
-#, no-c-format
-msgid ""
-"On &architecture; the lowmem levels have not been tested, so automatic "
-"detection is probably outdated and you thus probably <emphasis>need</"
-"emphasis> to pass the boot parameter if your system has little memory."
-msgstr ""
-
-#. Tag: para
-#: hardware.xml:1979
-#, no-c-format
-msgid ""
-"Installation on systems with less memory<footnote condition=\"gtk\"> <para> "
-"Installation images that support the graphical installer require more memory "
-"than images that support only the text-based installer and should not be "
-"used on systems with less than &minimum-memory; of memory. If there is a "
-"choice between booting the text-based and the graphical installer, the "
-"former should be selected on such systems. </para> </footnote> or disk space "
-"available may be possible but is only advised for experienced users."
+"We recommend at least &ref-no-desktop-ram-minimum; of memory and &minimum-fs-"
+"size; of hard disk space to perform an installation. For more detailed "
+"values, see <xref linkend=\"minimum-hardware-reqts\"/>."
 msgstr ""
 
 #~ msgid "<entry>MIPS Malta</entry>"
diff --git a/po/uk/preparing.po b/po/uk/preparing.po
index c62b42120..d8baeffab 100644
--- a/po/uk/preparing.po
+++ b/po/uk/preparing.po
@@ -4,7 +4,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: preparing_uk\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2023-08-06 23:04+0000\n"
+"POT-Creation-Date: 2023-08-08 23:04+0000\n"
 "PO-Revision-Date: 2022-03-07 16:56+0000\n"
 "Last-Translator: Andrij Mizyk <andmizyk@gmail.com>\n"
 "Language-Team: Ukranian\n"
@@ -960,19 +960,19 @@ msgstr ""
 #. Tag: entry
 #: preparing.xml:777
 #, no-c-format
-msgid "256 megabytes"
+msgid "&ref-no-desktop-ram-minimum;"
 msgstr ""
 
 #. Tag: entry
 #: preparing.xml:778
 #, no-c-format
-msgid "512 megabytes"
+msgid "&ref-no-desktop-ram-recommend;"
 msgstr ""
 
 #. Tag: entry
 #: preparing.xml:779
 #, no-c-format
-msgid "4 gigabytes"
+msgid "&ref-no-desktop-hd;"
 msgstr ""
 
 #. Tag: entry
@@ -984,19 +984,19 @@ msgstr ""
 #. Tag: entry
 #: preparing.xml:782
 #, no-c-format
-msgid "1 gigabytes"
+msgid "&ref-with-desktop-ram-minimum;"
 msgstr ""
 
 #. Tag: entry
 #: preparing.xml:783
 #, no-c-format
-msgid "2 gigabytes"
+msgid "&ref-with-desktop-ram-recommend;"
 msgstr ""
 
 #. Tag: entry
 #: preparing.xml:784
 #, no-c-format
-msgid "10 gigabytes"
+msgid "&ref-with-desktop-hd;"
 msgstr ""
 
 #. Tag: para
@@ -1004,8 +1004,8 @@ msgstr ""
 #, no-c-format
 msgid ""
 "The minimum values assumes that swap will be enabled and a non-liveCD image "
-"is used. The <quote>No desktop</quote> value assumes that the non-graphical "
-"(text-based) installer is used."
+"is used. The <quote>No desktop</quote> value assumes that the text-based "
+"installer (not the graphical one) is used."
 msgstr ""
 
 #. Tag: para
@@ -1024,6 +1024,40 @@ msgstr ""
 #: preparing.xml:805
 #, no-c-format
 msgid ""
+"The installer normally automatically enables memory-saving tricks to be able "
+"to run on such low-memory system, but on architectures that are less tested "
+"it may miss doing so. It can however be enabled manually by appending the "
+"<userinput>lowmem=1</userinput> or even <userinput>lowmem=2</userinput> boot "
+"parameter (see also <xref linkend=\"lowmem\"/> and <xref linkend=\"installer-"
+"args\"/>)."
+msgstr ""
+
+#. Tag: para
+#: preparing.xml:814
+#, no-c-format
+msgid ""
+"On &architecture; the lowmem levels have not been tested, so automatic "
+"detection is probably outdated and you thus probably <emphasis>need</"
+"emphasis> to pass the boot parameter if your system has little memory."
+msgstr ""
+
+#. Tag: para
+#: preparing.xml:820
+#, no-c-format
+msgid ""
+"Installation on systems with less memory<footnote condition=\"gtk\"> <para> "
+"Installation images that support the graphical installer require more memory "
+"than images that support only the text-based installer and should not be "
+"used on systems with less than &minimum-memory; of memory. If there is a "
+"choice between booting the text-based and the graphical installer, the "
+"former should be selected on such systems. </para> </footnote> or disk space "
+"available may be possible but is only advised for experienced users."
+msgstr ""
+
+#. Tag: para
+#: preparing.xml:837
+#, no-c-format
+msgid ""
 "It is possible to run a graphical desktop environment on older or low-end "
 "systems, but in that case it is recommended to install a window manager that "
 "is less resource-hungry than those of the GNOME or KDE Plasma desktop "
@@ -1033,7 +1067,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:814
+#: preparing.xml:846
 #, no-c-format
 msgid ""
 "It is practically impossible to give general memory or disk space "
@@ -1042,7 +1076,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:820
+#: preparing.xml:852
 #, no-c-format
 msgid ""
 "Remember that these sizes don't include all the other materials which are "
@@ -1051,7 +1085,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:827
+#: preparing.xml:859
 #, no-c-format
 msgid ""
 "Disk space required for the smooth operation of the &debian-gnu; system "
@@ -1066,13 +1100,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:851
+#: preparing.xml:883
 #, no-c-format
 msgid "Pre-Partitioning for Multi-Boot Systems"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:852
+#: preparing.xml:884
 #, no-c-format
 msgid ""
 "Partitioning your disk simply refers to the act of breaking up your disk "
@@ -1082,7 +1116,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:859
+#: preparing.xml:891
 #, no-c-format
 msgid ""
 "Whenever this section talks about <quote>disks</quote> you should translate "
@@ -1091,7 +1125,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:865
+#: preparing.xml:897
 #, no-c-format
 msgid ""
 "If you already have an operating system on your system <phrase arch=\"any-"
@@ -1105,7 +1139,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:884
+#: preparing.xml:916
 #, no-c-format
 msgid ""
 "You can find information about your current partition setup by using a "
@@ -1118,7 +1152,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:893
+#: preparing.xml:925
 #, no-c-format
 msgid ""
 "In general, changing a partition with a file system already on it will "
@@ -1129,7 +1163,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:901
+#: preparing.xml:933
 #, no-c-format
 msgid ""
 "Several modern operating systems offer the ability to move and resize "
@@ -1144,7 +1178,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:915
+#: preparing.xml:947
 #, no-c-format
 msgid ""
 "To losslessly resize an existing FAT or NTFS partition from within &d-i;, go "
@@ -1153,13 +1187,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:988
+#: preparing.xml:1020
 #, no-c-format
 msgid "Pre-Installation Hardware and Operating System Setup"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:989
+#: preparing.xml:1021
 #, no-c-format
 msgid ""
 "This section will walk you through pre-installation hardware setup, if any, "
@@ -1171,13 +1205,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1004
+#: preparing.xml:1036
 #, no-c-format
 msgid "Invoking the BIOS/UEFI Set-Up Menu"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1006
+#: preparing.xml:1038
 #, no-c-format
 msgid ""
 "The BIOS/UEFI provides the basic functions needed to boot your machine and "
@@ -1191,13 +1225,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1020 preparing.xml:1445
+#: preparing.xml:1052 preparing.xml:1477
 #, no-c-format
 msgid "Boot Device Selection"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1022
+#: preparing.xml:1054
 #, no-c-format
 msgid ""
 "Within the BIOS/UEFI setup menu, you can select which devices shall be "
@@ -1208,7 +1242,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1030
+#: preparing.xml:1062
 #, no-c-format
 msgid ""
 "Depending on the installation media (CD/DVD ROM, USB stick, network boot) "
@@ -1217,7 +1251,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1036
+#: preparing.xml:1068
 #, no-c-format
 msgid ""
 "Most BIOS/UEFI versions allow you to call up a boot menu on system startup "
@@ -1233,7 +1267,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1050
+#: preparing.xml:1082
 #, no-c-format
 msgid ""
 "If your BIOS/UEFI does not provide you with a boot menu to do ad-hoc choices "
@@ -1242,7 +1276,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1056
+#: preparing.xml:1088
 #, no-c-format
 msgid ""
 "Unfortunately some computers may contain buggy BIOS/UEFI versions. Booting "
@@ -1261,7 +1295,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1072
+#: preparing.xml:1104
 #, no-c-format
 msgid ""
 "If you cannot manipulate the BIOS/UEFI to boot directly from a USB stick you "
@@ -1272,13 +1306,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1138
+#: preparing.xml:1170
 #, no-c-format
 msgid "How to update bare metal ppc64el firmware"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1139
+#: preparing.xml:1171
 #, no-c-format
 msgid ""
 "This is an excerpt from <ulink url=\"&url-ibm-powerkvm;\">IBM PowerKVM on "
@@ -1286,7 +1320,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1144
+#: preparing.xml:1176
 #, no-c-format
 msgid ""
 "Open Power Abstraction Layer (OPAL) is the system firmware in the stack of "
@@ -1294,7 +1328,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1149
+#: preparing.xml:1181
 #, no-c-format
 msgid ""
 "There may be instances when the user might have to upgrade the Power Systems "
@@ -1303,31 +1337,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1155
+#: preparing.xml:1187
 #, no-c-format
 msgid "Make sure that the following requirements are met:"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1160
+#: preparing.xml:1192
 #, no-c-format
 msgid "an OS to be running on the system;"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1162
+#: preparing.xml:1194
 #, no-c-format
 msgid "the .img file of the OPAL level that the user needs to update to;"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1164
+#: preparing.xml:1196
 #, no-c-format
 msgid "the machine isn't under HMC control."
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1168
+#: preparing.xml:1200
 #, no-c-format
 msgid ""
 "Power Systems has two sides of flash to boot firmware from, namely permanent "
@@ -1337,13 +1371,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1175
+#: preparing.xml:1207
 #, no-c-format
 msgid "Perform the following steps for the update:"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1180
+#: preparing.xml:1212
 #, no-c-format
 msgid ""
 "Save the level of the existing firmware before really updating. In ASM, in "
@@ -1352,13 +1386,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: preparing.xml:1184
+#: preparing.xml:1216
 #, no-c-format
 msgid "cupdcmd -f"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1185
+#: preparing.xml:1217
 #, no-c-format
 msgid ""
 "Download the .img file of the level of firmware to be updated to a location "
@@ -1367,7 +1401,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1190
+#: preparing.xml:1222
 #, no-c-format
 msgid ""
 "Verify the image downloaded by running the following command and save the "
@@ -1375,38 +1409,38 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: preparing.xml:1193
+#: preparing.xml:1225
 #, no-c-format
 msgid "$update_flash -v -f &lt;file_name.img&gt;"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1195
+#: preparing.xml:1227
 #, no-c-format
 msgid "Update the firmware by running the following command."
 msgstr ""
 
 #. Tag: screen
-#: preparing.xml:1197
+#: preparing.xml:1229
 #, no-c-format
 msgid "$update_flash -f &lt;file_name.img&gt;"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1203
+#: preparing.xml:1235
 #, no-c-format
 msgid ""
 "The command reboots the system and therefore, sessions if any, would be lost."
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1206
+#: preparing.xml:1238
 #, no-c-format
 msgid "Do not reboot or switch off the system until it is back."
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1213
+#: preparing.xml:1245
 #, no-c-format
 msgid ""
 "Verify the updated firmware level of the temporary side of the flash as in "
@@ -1414,7 +1448,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1216
+#: preparing.xml:1248
 #, no-c-format
 msgid ""
 "In case the update has to be reverted, the user can do so by running this "
@@ -1426,7 +1460,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1223
+#: preparing.xml:1255
 #, no-c-format
 msgid ""
 "The new updated level can be committed to the permanent side of the flash by "
@@ -1434,19 +1468,19 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: preparing.xml:1226
+#: preparing.xml:1258
 #, no-c-format
 msgid "$update_flash -c"
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1234
+#: preparing.xml:1266
 #, no-c-format
 msgid "Updating KVM guest firmware (SLOF)"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1235
+#: preparing.xml:1267
 #, no-c-format
 msgid ""
 "Slimline Open Firmware (SLOF) is an implementation of the IEEE 1275 "
@@ -1455,7 +1489,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1242
+#: preparing.xml:1274
 #, no-c-format
 msgid ""
 "The package qemu-slof is, in fact, a dependency of package qemu-system-ppc "
@@ -1470,7 +1504,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1257
+#: preparing.xml:1289
 #, no-c-format
 msgid ""
 "Thus, one can use a different SLOF file rather than the default, when "
@@ -1479,19 +1513,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1267
+#: preparing.xml:1299
 #, no-c-format
 msgid "Updating PowerKVM hypervisor"
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1268
+#: preparing.xml:1300
 #, no-c-format
 msgid "Instructions for Netboot installation"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1269
+#: preparing.xml:1301
 #, no-c-format
 msgid ""
 "You will need a DHCP/TFTP (BOOTP) server, as well as a web server. After "
@@ -1526,13 +1560,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1293
+#: preparing.xml:1325
 #, no-c-format
 msgid "Boot your PowerLinux machine."
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1297
+#: preparing.xml:1329
 #, no-c-format
 msgid ""
 "There should be the following option at petitboot (select it): "
@@ -1542,13 +1576,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1308
+#: preparing.xml:1340
 #, no-c-format
 msgid "Instructions for DVD"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1309
+#: preparing.xml:1341
 #, no-c-format
 msgid ""
 "Boot the ISO ibm-powerkvm-*-ppc64-service-*.iso (either burn a DVD or make "
@@ -1556,7 +1590,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1312
+#: preparing.xml:1344
 #, no-c-format
 msgid ""
 "There should be the following option at petitboot (select it): "
@@ -1566,13 +1600,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1333
+#: preparing.xml:1365
 #, no-c-format
 msgid "BIOS Setup"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1334
+#: preparing.xml:1366
 #, no-c-format
 msgid ""
 "In order to install &debian-gnu; on a &arch-title; or zSeries machine you "
@@ -1586,7 +1620,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1346
+#: preparing.xml:1378
 #, no-c-format
 msgid ""
 "Linux on this platform runs either natively on the bare machine, in a so-"
@@ -1598,7 +1632,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1355
+#: preparing.xml:1387
 #, no-c-format
 msgid ""
 "Before you actually perform an installation, you have to go over some design "
@@ -1614,13 +1648,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1372
+#: preparing.xml:1404
 #, no-c-format
 msgid "Native and LPAR installations"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1373
+#: preparing.xml:1405
 #, no-c-format
 msgid ""
 "Please refer to chapter 5 of the <ulink url=\"http://www.redbooks.ibm.com/"
@@ -1631,13 +1665,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1387
+#: preparing.xml:1419
 #, no-c-format
 msgid "Installation as a VM guest"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1389
+#: preparing.xml:1421
 #, no-c-format
 msgid ""
 "Please refer to chapter 6 of the <ulink url=\"http://www.redbooks.ibm.com/"
@@ -1648,7 +1682,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1399
+#: preparing.xml:1431
 #, no-c-format
 msgid ""
 "You need to copy all the files from the <filename>generic</filename> sub-"
@@ -1662,13 +1696,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1416
+#: preparing.xml:1448
 #, no-c-format
 msgid "Setting up an installation server"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1418
+#: preparing.xml:1450
 #, no-c-format
 msgid ""
 "If you don't have a connection to the Internet (either directly or via a web "
@@ -1678,7 +1712,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1426
+#: preparing.xml:1458
 #, no-c-format
 msgid ""
 "The installation server needs to copy the exact directory structure from any "
@@ -1688,19 +1722,19 @@ msgid ""
 msgstr ""
 
 #. Tag: emphasis
-#: preparing.xml:1435
+#: preparing.xml:1467
 #, no-c-format
 msgid "FIXME: more information needed &mdash; from a Redbook?"
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1452
+#: preparing.xml:1484
 #, no-c-format
 msgid "ARM firmware"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1454
+#: preparing.xml:1486
 #, no-c-format
 msgid ""
 "As already mentioned before, there is unfortunately no standard for system "
@@ -1715,7 +1749,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1466
+#: preparing.xml:1498
 #, no-c-format
 msgid ""
 "As a result even newly sold systems often use a firmware that is based on a "
@@ -1729,13 +1763,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1479
+#: preparing.xml:1511
 #, no-c-format
 msgid "Debian-provided U-Boot (system firmware) images"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1480
+#: preparing.xml:1512
 #, no-c-format
 msgid ""
 "Debian provides U-Boot images for various armhf systems that can load their "
@@ -1751,7 +1785,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1495
+#: preparing.xml:1527
 #, no-c-format
 msgid ""
 "If Debian provides a U-Boot image for your system, it is recommended that "
@@ -1760,13 +1794,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1503
+#: preparing.xml:1535
 #, no-c-format
 msgid "Setting the ethernet MAC address in U-Boot"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1504
+#: preparing.xml:1536
 #, no-c-format
 msgid ""
 "The MAC address of every ethernet interface should normally be globally "
@@ -1777,7 +1811,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1512
+#: preparing.xml:1544
 #, no-c-format
 msgid ""
 "In the case of development boards, sometimes the manufacturer wants to avoid "
@@ -1792,7 +1826,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1523
+#: preparing.xml:1555
 #, no-c-format
 msgid ""
 "To avoid conflicts with existing officially-assigned MAC addresses, there is "
@@ -1805,7 +1839,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1533
+#: preparing.xml:1565
 #, no-c-format
 msgid ""
 "On systems using U-Boot as system firmware, the ethernet MAC address is "
@@ -1817,13 +1851,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1544
+#: preparing.xml:1576
 #, no-c-format
 msgid "Kernel/Initrd/Device-Tree relocation issues in U-Boot"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1545
+#: preparing.xml:1577
 #, no-c-format
 msgid ""
 "On some systems with older U-Boot versions there can be problems with "
@@ -1835,7 +1869,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1554
+#: preparing.xml:1586
 #, no-c-format
 msgid ""
 "If the system has originally used a U-Boot version older than v2014.07 and "
@@ -1850,7 +1884,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1565
+#: preparing.xml:1597
 #, no-c-format
 msgid ""
 "Another possibility to circumvent relocation-related problems is to run the "
@@ -1860,13 +1894,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1575
+#: preparing.xml:1607
 #, no-c-format
 msgid "Systems with UEFI firmware"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1576
+#: preparing.xml:1608
 #, no-c-format
 msgid ""
 "UEFI (<quote>Unified Extensible Firmware Interface</quote>) is a new kind of "
@@ -1875,7 +1909,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1582
+#: preparing.xml:1614
 #, no-c-format
 msgid ""
 "Currently most PC systems that use UEFI also have a so-called "
@@ -1888,7 +1922,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1592
+#: preparing.xml:1624
 #, no-c-format
 msgid ""
 "On systems with UEFI there are a few things to take into consideration when "
@@ -1911,7 +1945,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1612
+#: preparing.xml:1644
 #, no-c-format
 msgid ""
 "The latter becomes important when booting &d-i; on a UEFI system with CSM "
@@ -1930,13 +1964,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1631
+#: preparing.xml:1663
 #, no-c-format
 msgid "Secure boot"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1632
+#: preparing.xml:1664
 #, no-c-format
 msgid ""
 "Another UEFI-related topic is the so-called <quote>secure boot</quote> "
@@ -1951,7 +1985,7 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1647
+#: preparing.xml:1679
 #, no-c-format
 msgid ""
 "Disabling the Windows <quote>fast boot</quote>/<quote>fast startup</quote> "
@@ -1959,7 +1993,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1648
+#: preparing.xml:1680
 #, no-c-format
 msgid ""
 "Windows offers a feature (called <quote>fast boot</quote> in Windows 8, "
@@ -1979,7 +2013,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1665
+#: preparing.xml:1697
 #, no-c-format
 msgid ""
 "Furthermore, the Windows Update mechanism has (sometimes) been known to "
@@ -1988,7 +2022,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1670
+#: preparing.xml:1702
 #, no-c-format
 msgid ""
 "It may also be necessary to disable <quote>fast boot</quote> to even allow "
@@ -2000,19 +2034,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1682
+#: preparing.xml:1714
 #, no-c-format
 msgid "Hardware Issues to Watch Out For"
 msgstr ""
 
 #. Tag: title
-#: preparing.xml:1685
+#: preparing.xml:1717
 #, no-c-format
 msgid "USB BIOS support and keyboards"
 msgstr ""
 
 #. Tag: para
-#: preparing.xml:1686
+#: preparing.xml:1718
 #, no-c-format
 msgid ""
 "If you have no PS/2-style keyboard, but only a USB model, on some very old "