[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 274 insertions, 197 deletions

diff --git a/po/uk/install-methods.po b/po/uk/install-methods.po
index f680fe2f5..f4675c268 100644
--- a/po/uk/install-methods.po
+++ b/po/uk/install-methods.po
@@ -4,7 +4,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: install-methods_uk\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-12-02 23:02+0000\n"
+"POT-Creation-Date: 2021-10-27 23:02+0000\n"
 "PO-Revision-Date: 2019-09-03 08:32+0100\n"
 "Last-Translator: \n"
 "Language-Team: Ukranian\n"
@@ -261,38 +261,42 @@ msgid ""
 "the USB stick is inserted, it will be mapped to a device named <filename>/"
 "dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
 "You should be able to see to which device the USB stick was mapped by "
-"running the command <command>dmesg</command> after inserting it. To write to "
-"your stick, you may have to turn off its write protection switch."
+"running the command <command>lsblk</command> before and after inserting it. "
+"(The output of <command>dmesg</command> (as root) is another possible method "
+"for that.) To write to your stick, you may have to turn off its write "
+"protection switch."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:253
+#: install-methods.xml:255
 #, no-c-format
 msgid ""
 "The procedures described in this section will destroy anything already on "
 "the device! Make very sure that you use the correct device name for your USB "
 "stick. If you use the wrong device the result could be that all information "
-"on for example a hard disk could be lost."
+"on, for example, a hard disk is lost."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:263
+#: install-methods.xml:265
 #, no-c-format
 msgid "Preparing a USB stick using a hybrid CD/DVD image"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:264
+#: install-methods.xml:266
 #, no-c-format
 msgid ""
-"Debian installation images can now be written directly to a USB stick, which "
-"is a very easy way to make a bootable USB stick. Simply choose an image "
-"(such as the netinst, CD, DVD-1, or netboot) that will fit on your USB "
-"stick. See <xref linkend=\"official-cdrom\"/> to get an installation image."
+"Debian installation images for this architecture are created using the "
+"<command>isohybrid</command> technology; that means they can be written "
+"directly to a USB stick, which is a very easy way to make an installation "
+"media. Simply choose an image (such as the netinst, CD or DVD-1) that will "
+"fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
+"installation image."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:272
+#: install-methods.xml:276
 #, no-c-format
 msgid ""
 "Alternatively, for very small USB sticks, only a few megabytes in size, you "
@@ -302,7 +306,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:279
+#: install-methods.xml:283
 #, no-c-format
 msgid ""
 "The installation image you choose should be written directly to the USB "
@@ -319,7 +323,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:291
+#: install-methods.xml:295
 #, no-c-format
 msgid ""
 "The image must be written to the whole-disk device and not a partition, e."
@@ -328,7 +332,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:297
+#: install-methods.xml:301
 #, no-c-format
 msgid ""
 "Simply writing the installation image to USB like this should work fine for "
@@ -337,7 +341,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:305
+#: install-methods.xml:309
 #, no-c-format
 msgid ""
 "The hybrid image on the stick does not occupy all the storage space, so it "
@@ -347,63 +351,75 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:313
+#: install-methods.xml:317
 #, no-c-format
 msgid ""
-"Create a second, FAT partition on the stick, mount the partition and copy or "
-"unpack the firmware onto it. For example:"
-msgstr ""
-
-#. Tag: screen
-#: install-methods.xml:318
-#, no-c-format
-msgid ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+"To do so, use cfdisk or any other partitioning tool to create an additional "
+"partition on the stick. Then create a (FAT) filesystem on the partition, "
+"mount it and copy or unpack the firmware onto it, for example with: "
+"<informalexample><screen>\n"
+"# mkdosfs -n FIRMWARE /dev/sdX3\n"
+"# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
 "# cd /mnt\n"
 "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
 "# cd /\n"
-"# umount /mnt"
+"# umount /mnt\n"
+"</screen></informalexample> Take care that you use the correct device name "
+"for your USB stick. The <command>mkdosfs</command> command is contained in "
+"the <classname>dosfstools</classname> &debian; package."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:320
+#: install-methods.xml:329
 #, no-c-format
 msgid ""
-"You might have written the <filename>mini.iso</filename> to the USB stick. "
-"In this case the second partition doesn't have to be created as, very "
-"nicely, it will already be present. Unplugging and replugging the USB stick "
-"should make the two partitions visible."
+"If you have chosen the <filename>mini.iso</filename> to be written to the "
+"USB stick, the second partition doesn't have to be created, as - very nicely "
+"- it will already be present. Unplugging and replugging the USB stick should "
+"make the two partitions visible."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:334
+#: install-methods.xml:343
 #, no-c-format
 msgid "Manually copying files to the USB stick"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:335
+#: install-methods.xml:344
+#, no-c-format
+msgid ""
+"Prior to isohybrid technology being used for &debian; installation images, "
+"the methods documented in the chapters below were used to prepare media for "
+"booting from USB devices. These have been superseded by the technique in "
+"<xref linkend=\"usb-copy-isohybrid\"/>, but have been left here for "
+"educational and historical purposes and in case they are useful to some user."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:353
 #, no-c-format
 msgid ""
-"An alternative way to set up your USB stick is to manually copy the "
-"installer files, and also an installation image to it. Note that the USB "
-"stick should be at least 1 GB in size (smaller setups are possible if you "
-"follow <xref linkend=\"usb-copy-flexible\"/>)."
+"An alternative to the method described in <xref linkend=\"usb-copy-isohybrid"
+"\"/> is to manually copy the installer files, and also an installation image "
+"to the stick. Note that the USB stick should be at least 1 GB in size "
+"(smaller setups are possible using the files from netboot, following <xref "
+"linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:342
+#: install-methods.xml:362
 #, no-c-format
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
-"installer files (including the kernel) <phrase arch=\"x86\">as well as "
-"<classname>syslinux</classname> and its configuration file</phrase> <phrase "
-"arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+"installer files (including the kernel)<phrase arch=\"x86\"> as well as "
+"<classname>syslinux</classname> and its configuration file</phrase><phrase "
+"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
 "configuration file</phrase>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:351
+#: install-methods.xml:371
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -414,19 +430,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:359
+#: install-methods.xml:379
 #, no-c-format
-msgid "To use this image simply extract it directly to your USB stick:"
+msgid "Simply extract this image directly to your USB stick:"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:363
+#: install-methods.xml:383
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:365
+#: install-methods.xml:385
 #, no-c-format
 msgid ""
 "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
@@ -435,13 +451,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:371
+#: install-methods.xml:391
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:373
+#: install-methods.xml:393
 #, no-c-format
 msgid ""
 "After that, mount the USB memory stick <phrase arch="
@@ -450,18 +466,18 @@ msgid ""
 "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now "
 "have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc"
 "\">an HFS filesystem</phrase> on it, and copy a &debian; ISO image (netinst "
-"or full CD/DVD) to it. Unmount the stick (<userinput>umount /mnt</"
-"userinput>) and you are done."
+"or full CD; see <xref linkend=\"official-cdrom\"/>) to it. Unmount the stick "
+"(<userinput>umount /mnt</userinput>) and you are done."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:390
+#: install-methods.xml:411
 #, no-c-format
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:391
+#: install-methods.xml:412
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -472,13 +488,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:406 install-methods.xml:528
+#: install-methods.xml:427
 #, no-c-format
-msgid "Partitioning the USB stick"
+msgid "Partitioning and adding a boot loader"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:407
+#: install-methods.xml:428
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -486,19 +502,38 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:433
+#, no-c-format
+msgid ""
+"In order to start the kernel after booting from the USB stick, we will put a "
+"boot loader on the stick. Although any boot loader should work, it's "
+"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
+"partition and can be reconfigured by just editing a text file. Any operating "
+"system which supports the FAT file system can be used to make changes to the "
+"configuration of the boot loader."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:443
+#, no-c-format
+msgid ""
+"First, you need to install the <classname>syslinux</classname> and "
+"<classname>mtools</classname> packages on your system."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:448
 #, no-c-format
 msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
 "probably won't have to repartition or reformat the stick. If you have to do "
 "that anyway, use <command>cfdisk</command> or any other partitioning tool to "
-"create a FAT16 partition<footnote> <para> Don't forget to set the "
-"<quote>bootable</quote> bootable flag. </para> </footnote>, install an MBR "
+"create a FAT16 partition now<footnote> <para> Don't forget to activate the "
+"<quote>bootable</quote> flag. </para> </footnote>, and then install an MBR "
 "using: <informalexample><screen>\n"
-"# install-mbr /dev/<replaceable>sdX</replaceable>\n"
-"</screen></informalexample> The <command>install-mbr</command> command is "
-"contained in the <classname>mbr</classname> &debian; package. Then create "
-"the filesystem using: <informalexample><screen>\n"
+"# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
+"</screen></informalexample> Now create the filesystem using: "
+"<informalexample><screen>\n"
 "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Take care that you use the correct device name "
 "for your USB stick. The <command>mkdosfs</command> command is contained in "
@@ -506,24 +541,12 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:436
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. Although any boot loader should work, it's "
-"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
-"partition and can be reconfigured by just editing a text file. Any operating "
-"system which supports the FAT file system can be used to make changes to the "
-"configuration of the boot loader."
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:446
+#: install-methods.xml:471
 #, no-c-format
 msgid ""
-"To put <classname>syslinux</classname> on the FAT16 partition on your USB "
-"stick, install the <classname>syslinux</classname> and <classname>mtools</"
-"classname> packages on your system, and do: <informalexample><screen>\n"
+"Having a correctly partitioned USB stick (now), you need to put "
+"<classname>syslinux</classname> on the FAT16 partition with: "
+"<informalexample><screen>\n"
 "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Again, take care that you use the correct device "
 "name. The partition must not be mounted when starting <command>syslinux</"
@@ -533,43 +556,71 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:463 install-methods.xml:575
+#: install-methods.xml:487
 #, no-c-format
-msgid "Adding the installer image"
+msgid "Adding the installer files"
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:488
+#, no-c-format
+msgid ""
+"There are two different installation variants to choose here: The hd-media "
+"variant needs an installation ISO file on the stick, to load installer "
+"modules and the base system from. The netboot installer however will load "
+"all that from a &debian; mirror."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:464
+#: install-methods.xml:495
 #, no-c-format
 msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick: "
-"<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
-"<filename>linux</filename> (kernel binary) </para></listitem> "
-"<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
-"para></listitem> </itemizedlist> You can choose between either the text-"
-"based or the graphical version of the installer. The latter can be found in "
-"the <filename>gtk</filename> subdirectory. If you want to rename the files, "
-"please note that <classname>syslinux</classname> can only process DOS (8.3) "
-"file names."
+"According to your choice, you have to download some installer files from the "
+"hd-media or netboot subdirectory of <ulink url=\"&url-debian-installer;images"
+"\">debian/dists/&releasename;/main/installer-&architecture;/current/images/</"
+"ulink> on any &debian; mirror: <itemizedlist> <listitem><para> "
+"<filename>vmlinuz</filename> or <filename>linux</filename> (kernel binary) </"
+"para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+"ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+"either the text-based version of the installer (the files can be found "
+"directly in hd-media or netboot) or the graphical version (look in the "
+"respective <filename>gtk</filename> subdirectories)."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:488
+#: install-methods.xml:519
 #, no-c-format
 msgid ""
-"Next you should create a <filename>syslinux.cfg</filename> configuration "
-"file, which at a bare minimum should contain the following line (change the "
-"name of the kernel binary to <quote><filename>linux</filename></quote> if "
-"you used a <filename>netboot</filename> image): <informalexample><screen>\n"
+"Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+"replaceable> /mnt</userinput>) and copy the downloaded files to the root "
+"directory of the stick."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:525
+#, no-c-format
+msgid ""
+"Next you should create a text file named <filename>syslinux.cfg</filename> "
+"in the root directory of the stick as configuration file for syslinux, which "
+"at a bare minimum should contain the following line: "
+"<informalexample><screen>\n"
 "default vmlinuz initrd=initrd.gz\n"
-"</screen></informalexample> For the graphical installer you should add "
-"<userinput>vga=788</userinput> to the line. Other parameters can be appended "
-"as desired."
+"</screen></informalexample> Change the name of the kernel binary to "
+"<quote><filename>linux</filename></quote> if you used files from "
+"<filename>netboot</filename>."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:536
+#, no-c-format
+msgid ""
+"For the graphical installer (from <filename>gtk</filename>) you should add "
+"<userinput>vga=788</userinput> at the end of the line. Other parameters can "
+"be appended as desired."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:500
+#: install-methods.xml:542
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -577,20 +628,40 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:505
+#: install-methods.xml:547
 #, no-c-format
 msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/>). Be "
-"sure to select one that fits. Note that the <quote>netboot <filename>mini."
-"iso</filename></quote> image is not usable for this purpose. </para> </"
-"footnote> onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
+"If you used files from <filename>hd-media</filename>, you should now copy "
+"the ISO file of a &debian; installation image onto the stick. (For the "
+"<filename>netboot</filename> variant this is not needed.)"
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:553
+#, no-c-format
+msgid ""
+"You can use either a netinst or a full CD/DVD image (see <xref linkend="
+"\"official-cdrom\"/>). Be sure to select one that fits on your stick. Note "
+"that the <quote>netboot <filename>mini.iso</filename></quote> image is not "
+"usable for this purpose."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:560
+#, no-c-format
+msgid ""
+"When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+"userinput>)."
+msgstr ""
+
+#. Tag: title
+#: install-methods.xml:573
+#, no-c-format
+msgid "Partitioning the USB stick"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:529
+#: install-methods.xml:574
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -608,7 +679,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:591
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -619,7 +690,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:555
+#: install-methods.xml:600
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -639,8 +710,14 @@ msgid ""
 "utilities."
 msgstr ""
 
+#. Tag: title
+#: install-methods.xml:620
+#, no-c-format
+msgid "Adding the installer image"
+msgstr ""
+
 #. Tag: para
-#: install-methods.xml:576
+#: install-methods.xml:621
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
@@ -648,31 +725,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:583
+#: install-methods.xml:628
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:588
+#: install-methods.xml:633
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:593
+#: install-methods.xml:638
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:598
+#: install-methods.xml:643
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:605
+#: install-methods.xml:650
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -693,7 +770,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:615
+#: install-methods.xml:660
 #, no-c-format
 msgid ""
 "If you used an <filename>hd-media</filename> image, you should now copy the "
@@ -706,13 +783,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:643
+#: install-methods.xml:688
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:644
+#: install-methods.xml:689
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -723,7 +800,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:652
+#: install-methods.xml:697
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -732,7 +809,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:658
+#: install-methods.xml:703
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -746,7 +823,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:669
+#: install-methods.xml:714
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -755,13 +832,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:678
+#: install-methods.xml:723
 #, no-c-format
 msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:680
+#: install-methods.xml:725
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -769,7 +846,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:686
+#: install-methods.xml:731
 #, no-c-format
 msgid ""
 "At boot time, <command>GRUB</command> supports loading in memory not only "
@@ -778,7 +855,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:692
+#: install-methods.xml:737
 #, no-c-format
 msgid ""
 "Copy the following files from the &debian; archives to a convenient location "
@@ -786,19 +863,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:699
+#: install-methods.xml:744
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:704
+#: install-methods.xml:749
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:711
+#: install-methods.xml:756
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -809,7 +886,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:720
+#: install-methods.xml:765
 #, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -821,7 +898,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:728
+#: install-methods.xml:773
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -829,13 +906,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:738
+#: install-methods.xml:783
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:739
+#: install-methods.xml:784
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -843,7 +920,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:789
 #, no-c-format
 msgid ""
 "Copy the following directories from a &debian; installation image to "
@@ -851,26 +928,26 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:794
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:799
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:866
+#: install-methods.xml:911
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:867
+#: install-methods.xml:912
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -881,7 +958,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:875
+#: install-methods.xml:920
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -890,7 +967,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:882
+#: install-methods.xml:927
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -903,7 +980,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:896
+#: install-methods.xml:941
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -912,7 +989,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:902
+#: install-methods.xml:947
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -920,7 +997,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:907
+#: install-methods.xml:952
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -930,7 +1007,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:915
+#: install-methods.xml:960
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -940,13 +1017,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:931
+#: install-methods.xml:976
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:932
+#: install-methods.xml:977
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -958,7 +1035,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -973,13 +1050,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:965
+#: install-methods.xml:1010
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:966
+#: install-methods.xml:1011
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -989,7 +1066,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:973
+#: install-methods.xml:1018
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1014,7 +1091,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:975
+#: install-methods.xml:1020
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1026,7 +1103,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:985
+#: install-methods.xml:1030
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1034,13 +1111,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:993
+#: install-methods.xml:1038
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:994
+#: install-methods.xml:1039
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1078,7 +1155,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1004
+#: install-methods.xml:1049
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1086,7 +1163,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:1008
+#: install-methods.xml:1053
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1100,13 +1177,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1021
+#: install-methods.xml:1066
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1022
+#: install-methods.xml:1067
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1117,7 +1194,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:1075
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1152,7 +1229,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1063
+#: install-methods.xml:1108
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1167,13 +1244,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1082
+#: install-methods.xml:1127
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1083
+#: install-methods.xml:1128
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1181,7 +1258,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1088
+#: install-methods.xml:1133
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1192,7 +1269,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1097
+#: install-methods.xml:1142
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1204,7 +1281,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1107
+#: install-methods.xml:1152
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1215,7 +1292,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1115
+#: install-methods.xml:1160
 #, no-c-format
 msgid ""
 "If you intend to install &debian; on an SGI machine and your TFTP server is "
@@ -1233,13 +1310,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1137
+#: install-methods.xml:1182
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1138
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1250,7 +1327,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1147
+#: install-methods.xml:1192
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -1261,37 +1338,37 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1158
+#: install-methods.xml:1203
 #, no-c-format
 msgid "vmlinux"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1163
+#: install-methods.xml:1208
 #, no-c-format
 msgid "initrd.gz"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1168
+#: install-methods.xml:1213
 #, no-c-format
 msgid "yaboot"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1173
+#: install-methods.xml:1218
 #, no-c-format
 msgid "yaboot.conf"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1178
+#: install-methods.xml:1223
 #, no-c-format
 msgid "boot.msg"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1228
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1304,7 +1381,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1193
+#: install-methods.xml:1238
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1315,13 +1392,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1205
+#: install-methods.xml:1250
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1206
+#: install-methods.xml:1251
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -1340,7 +1417,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1222
+#: install-methods.xml:1267
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -1350,7 +1427,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1229
+#: install-methods.xml:1274
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -1360,13 +1437,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1240
+#: install-methods.xml:1285
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1241
+#: install-methods.xml:1286
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -1376,13 +1453,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1349
+#: install-methods.xml:1394
 #, no-c-format
 msgid "Automatic Installation"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1350
+#: install-methods.xml:1395
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -1393,13 +1470,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1362
+#: install-methods.xml:1407
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1363
+#: install-methods.xml:1408
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -1409,7 +1486,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1370
+#: install-methods.xml:1415
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -1417,13 +1494,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1384
+#: install-methods.xml:1429
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1386
+#: install-methods.xml:1431
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -1433,7 +1510,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1397
+#: install-methods.xml:1442
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1441,7 +1518,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1403
+#: install-methods.xml:1448
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1449,7 +1526,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1409
+#: install-methods.xml:1454
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -1457,7 +1534,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1460
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -1466,7 +1543,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1423
+#: install-methods.xml:1468
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -1480,7 +1557,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1436
+#: install-methods.xml:1481
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="