[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 138 insertions, 142 deletions

diff --git a/po/ro/using-d-i.po b/po/ro/using-d-i.po
index 4baac2627..8071d3c71 100644
--- a/po/ro/using-d-i.po
+++ b/po/ro/using-d-i.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: using-d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-07-03 23:05+0000\n"
+"POT-Creation-Date: 2019-08-10 23:04+0000\n"
 "PO-Revision-Date: 2006-11-25 02:25+0200\n"
 "Last-Translator: Eddy Petrișor <eddy.petrisor@gmail.com>\n"
 "Language-Team: Romanian <debian-l10n-romanian@lists.debian.org>\n"
@@ -3965,26 +3965,34 @@ msgstr "Alegerea tastaturii"
 #: using-d-i.xml:2475
 #, no-c-format
 msgid ""
-"If you have selected to use a network mirror during the installation "
-"(optional for CD/DVD installs, required for netboot images), you will be "
-"presented with a list of geographically nearby (and therefore hopefully "
-"fast) network mirrors, based upon your country selection earlier in the "
+"Unless you chose not to use a network mirror, you will be presented with a "
+"list of network mirrors based upon your country selection earlier in the "
 "installation process. Choosing the offered default is usually fine."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2483
+#: using-d-i.xml:2482
+#, no-c-format
+msgid ""
+"The offered default is deb.debian.org, which is not a mirror itself but will "
+"redirect to a mirror that should be up-to-date and fast. These mirrors "
+"support TLS (https protocol) and IPv6. This service is maintained by the "
+"Debian System Administration (DSA) team."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:2489
 #, no-c-format
 msgid ""
 "A mirror can also be specified by hand by choosing <quote>enter information "
 "manually</quote> . You can then specify a mirror host name and an optional "
-"port number. As of Wheezy, that actually has to be a URL base, i.e. when "
-"specifying an IPv6 address, one has to add square brackets around it, for "
-"instance <quote>[2001:db8::1]</quote>."
+"port number. This actually has to be a URL base, i.e. when specifying an "
+"IPv6 address, one has to add square brackets around it, for instance "
+"<quote>[2001:db8::1]</quote>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2491
+#: using-d-i.xml:2497
 #, no-c-format
 msgid ""
 "If your computer is on an IPv6-only network (which is probably not the case "
@@ -4000,26 +4008,14 @@ msgid ""
 "possible one."
 msgstr ""
 
-#. Tag: para
-#: using-d-i.xml:2505
-#, no-c-format
-msgid ""
-"Another option when choosing to specify the mirror manually is to use "
-"<quote>httpredir.debian.org</quote> as your mirror. <quote>httpredir.debian."
-"org</quote> is not a physical mirror but a mirror redirection service, i.e. "
-"it automatically refers your system to a real mirror near you in terms of "
-"network topology. It takes into account by which protocol you connect to it, "
-"i.e. if you use IPv6, it will refer you to an IPv6-capable mirror near you."
-msgstr ""
-
 #. Tag: title
-#: using-d-i.xml:2524
+#: using-d-i.xml:2520
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2522
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -4031,7 +4027,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2531
 #, no-c-format
 msgid ""
 "These tasks loosely represent a number of different jobs or things you want "
@@ -4049,7 +4045,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2561
+#: using-d-i.xml:2557
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
@@ -4058,7 +4054,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2568
+#: using-d-i.xml:2564
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -4066,7 +4062,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2574
+#: using-d-i.xml:2570
 #, no-c-format
 msgid ""
 "The <quote>Desktop environment</quote> task will install a graphical desktop "
@@ -4074,7 +4070,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2579
+#: using-d-i.xml:2575
 #, no-c-format
 msgid ""
 "By default, &d-i; installs the <phrase arch=\"x86\">Gnome</phrase> <phrase "
@@ -4085,7 +4081,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2587
+#: using-d-i.xml:2583
 #, no-c-format
 msgid ""
 "Note that this will only work if the packages needed for the desired desktop "
@@ -4098,7 +4094,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2597
+#: using-d-i.xml:2593
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. Web "
@@ -4107,7 +4103,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2604
+#: using-d-i.xml:2600
 #, no-c-format
 msgid ""
 "The <quote>Standard system</quote> task will install any package that has a "
@@ -4118,7 +4114,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2612
+#: using-d-i.xml:2608
 #, no-c-format
 msgid ""
 "If during language selection a default locale other than the <quote>C</"
@@ -4131,7 +4127,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2622
+#: using-d-i.xml:2618
 #, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -4141,7 +4137,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2629
+#: using-d-i.xml:2625
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -4153,7 +4149,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2638
+#: using-d-i.xml:2634
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -4165,13 +4161,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2653
+#: using-d-i.xml:2649
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2655
+#: using-d-i.xml:2651
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -4181,13 +4177,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2670
+#: using-d-i.xml:2666
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2672
+#: using-d-i.xml:2668
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -4198,7 +4194,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2680
+#: using-d-i.xml:2676
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -4209,13 +4205,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2698
+#: using-d-i.xml:2694
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2699
+#: using-d-i.xml:2695
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -4226,19 +4222,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2708
+#: using-d-i.xml:2704
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2720 using-d-i.xml:2993
+#: using-d-i.xml:2716 using-d-i.xml:2989
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2722 using-d-i.xml:2995
+#: using-d-i.xml:2718 using-d-i.xml:2991
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -4247,7 +4243,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2728
+#: using-d-i.xml:2724
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -4256,7 +4252,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2734
+#: using-d-i.xml:2730
 #, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -4265,13 +4261,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2747
+#: using-d-i.xml:2743
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2749
+#: using-d-i.xml:2745
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -4282,7 +4278,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2759
+#: using-d-i.xml:2755
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -4292,7 +4288,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2767
+#: using-d-i.xml:2763
 #, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -4300,13 +4296,13 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2774
+#: using-d-i.xml:2770
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -4314,14 +4310,14 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, fuzzy, no-c-format
 #| msgid "Created partitions"
 msgid "new &debian; partition"
 msgstr "Partiții create"
 
 #. Tag: para
-#: using-d-i.xml:2781
+#: using-d-i.xml:2777
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -4330,13 +4326,13 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, no-c-format
 msgid "Other choice"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2790
+#: using-d-i.xml:2786
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -4345,7 +4341,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2800
+#: using-d-i.xml:2796
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -4356,13 +4352,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2816
+#: using-d-i.xml:2812
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2818
+#: using-d-i.xml:2814
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -4379,7 +4375,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2834
+#: using-d-i.xml:2830
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -4391,13 +4387,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2846
+#: using-d-i.xml:2842
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2848
+#: using-d-i.xml:2844
 #, no-c-format
 msgid ""
 "The criterion for selecting a partition is that it must be a FAT format "
@@ -4409,13 +4405,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2863
+#: using-d-i.xml:2859
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2865
+#: using-d-i.xml:2861
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4433,13 +4429,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2887
+#: using-d-i.xml:2883
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2888
+#: using-d-i.xml:2884
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4448,13 +4444,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2897
+#: using-d-i.xml:2893
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2898
+#: using-d-i.xml:2894
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4464,13 +4460,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2908
+#: using-d-i.xml:2904
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2909
+#: using-d-i.xml:2905
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4480,13 +4476,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2921
+#: using-d-i.xml:2917
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2922
+#: using-d-i.xml:2918
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4495,13 +4491,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2932
+#: using-d-i.xml:2928
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2933
+#: using-d-i.xml:2929
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4511,13 +4507,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2957
+#: using-d-i.xml:2953
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2958
+#: using-d-i.xml:2954
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4530,13 +4526,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2976
+#: using-d-i.xml:2972
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2977
+#: using-d-i.xml:2973
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4546,7 +4542,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3001
+#: using-d-i.xml:2997
 #, no-c-format
 msgid ""
 "By default, Grub will be installed into the PReP partition, where it will "
@@ -4554,13 +4550,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3014
+#: using-d-i.xml:3010
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3015
+#: using-d-i.xml:3011
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4571,13 +4567,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3032
+#: using-d-i.xml:3028
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3034
+#: using-d-i.xml:3030
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -4595,13 +4591,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3059
+#: using-d-i.xml:3055
 #, no-c-format
 msgid "Making the system bootable with flash-kernel"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3060
+#: using-d-i.xml:3056
 #, no-c-format
 msgid ""
 "As there is no common firmware interface on all ARM platforms, the steps "
@@ -4614,7 +4610,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3071
+#: using-d-i.xml:3067
 #, no-c-format
 msgid ""
 "On devices which boot from internal NOR- or NAND-flash memory, flash-kernel "
@@ -4626,7 +4622,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3081
+#: using-d-i.xml:3077
 #, no-c-format
 msgid ""
 "For ARM systems that use U-Boot as their system firmware and boot the kernel "
@@ -4636,13 +4632,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3097
+#: using-d-i.xml:3093
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3099
+#: using-d-i.xml:3095
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -4651,7 +4647,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3106
+#: using-d-i.xml:3102
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -4665,13 +4661,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3123
+#: using-d-i.xml:3119
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3124
+#: using-d-i.xml:3120
 #, no-c-format
 msgid ""
 "This is the last step in the &debian; installation process during which the "
@@ -4680,13 +4676,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3137
+#: using-d-i.xml:3133
 #, no-c-format
 msgid "Setting the System Clock"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3139
+#: using-d-i.xml:3135
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -4696,7 +4692,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3146
+#: using-d-i.xml:3142
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -4708,7 +4704,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3157
+#: using-d-i.xml:3153
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -4717,13 +4713,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3172
+#: using-d-i.xml:3168
 #, no-c-format
 msgid "Reboot the System"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3174
+#: using-d-i.xml:3170
 #, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -4732,7 +4728,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3180
+#: using-d-i.xml:3176
 #, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -4742,13 +4738,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3193
+#: using-d-i.xml:3189
 #, no-c-format
 msgid "Troubleshooting"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3194
+#: using-d-i.xml:3190
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -4757,13 +4753,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3207
+#: using-d-i.xml:3203
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3209
+#: using-d-i.xml:3205
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -4772,7 +4768,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3216
+#: using-d-i.xml:3212
 #, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -4783,13 +4779,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3236
+#: using-d-i.xml:3232
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3238
+#: using-d-i.xml:3234
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -4805,13 +4801,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3256
+#: using-d-i.xml:3252
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3260
+#: using-d-i.xml:3256
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -4822,7 +4818,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3268
+#: using-d-i.xml:3264
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4834,7 +4830,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3277
+#: using-d-i.xml:3273
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -4843,7 +4839,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3284
+#: using-d-i.xml:3280
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -4852,7 +4848,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3290
+#: using-d-i.xml:3286
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -4862,13 +4858,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3306
+#: using-d-i.xml:3302
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3308
+#: using-d-i.xml:3304
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4880,7 +4876,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3318
+#: using-d-i.xml:3314
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4894,7 +4890,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3331
+#: using-d-i.xml:3327
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4902,7 +4898,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3336
+#: using-d-i.xml:3332
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4916,7 +4912,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3348
+#: using-d-i.xml:3344
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4925,7 +4921,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3354
+#: using-d-i.xml:3350
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4944,7 +4940,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3371
+#: using-d-i.xml:3367
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -4960,7 +4956,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3384
+#: using-d-i.xml:3380
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -4974,7 +4970,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3397
+#: using-d-i.xml:3393
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4989,7 +4985,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3413
+#: using-d-i.xml:3409
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -5002,7 +4998,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3423
+#: using-d-i.xml:3419
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -5013,13 +5009,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3442
+#: using-d-i.xml:3438
 #, no-c-format
 msgid "Loading Missing Firmware"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3443
+#: using-d-i.xml:3439
 #, no-c-format
 msgid ""
 "As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
@@ -5029,7 +5025,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3451
+#: using-d-i.xml:3447
 #, no-c-format
 msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
@@ -5041,7 +5037,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3461
+#: using-d-i.xml:3457
 #, no-c-format
 msgid ""
 "Which devices are scanned and which file systems are supported depends on "
@@ -5053,7 +5049,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3471
+#: using-d-i.xml:3467
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -5062,7 +5058,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3477
+#: using-d-i.xml:3473
 #, no-c-format
 msgid ""
 "&d-i; only prompts for firmware needed by kernel modules loaded during the "
@@ -5076,13 +5072,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3491
+#: using-d-i.xml:3487
 #, no-c-format
 msgid "Preparing a medium"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3492
+#: using-d-i.xml:3488
 #, no-c-format
 msgid ""
 "Official CD images do not include non-free firmware. The most common method "
@@ -5097,7 +5093,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3505
+#: using-d-i.xml:3501
 #, no-c-format
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
@@ -5108,7 +5104,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3519
+#: using-d-i.xml:3515
 #, no-c-format
 msgid ""
 "If the firmware you need is not included in the tarball, you can also "
@@ -5119,7 +5115,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3533
+#: using-d-i.xml:3529
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -5128,13 +5124,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:3542
+#: using-d-i.xml:3538
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3543
+#: using-d-i.xml:3539
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -5146,7 +5142,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3552
+#: using-d-i.xml:3548
 #, no-c-format
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
@@ -5157,7 +5153,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3560
+#: using-d-i.xml:3556
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -5166,7 +5162,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3567
+#: using-d-i.xml:3563
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "