[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 79 insertions, 79 deletions

diff --git a/po/pot/using-d-i.pot b/po/pot/using-d-i.pot
index 4d6a719dd..36dccdff7 100644
--- a/po/pot/using-d-i.pot
+++ b/po/pot/using-d-i.pot
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2007-05-05 22:00+0000\n"
+"POT-Creation-Date: 2007-05-10 19:09+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -113,7 +113,7 @@ msgstr ""
 #. Tag: para
 #: using-d-i.xml:128
 #, no-c-format
-msgid "You can get to the main menu by selecting the <quote>Back</quote> button repeatedly to back all the way out of the currently running component."
+msgid "You can get to the main menu by selecting the &BTN-GOBACK; button repeatedly to back all the way out of the currently running component."
 msgstr ""
 
 #. Tag: term
@@ -1622,7 +1622,7 @@ msgstr ""
 #. Tag: para
 #: using-d-i.xml:2068
 #, no-c-format
-msgid "Once you've selected your tasks, select <guibutton>OK</guibutton>. At this point, <command>aptitude</command> will install the packages that are part of the tasks you've selected."
+msgid "Once you've selected your tasks, select &BTN-CONT;. At this point, <command>aptitude</command> will install the packages that are part of the tasks you've selected."
 msgstr ""
 
 #. Tag: para
@@ -1718,7 +1718,7 @@ msgstr ""
 #. Tag: para
 #: using-d-i.xml:2202
 #, no-c-format
-msgid "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a flexible and robust boot loader and a good default choice for newbies and old hands alike."
+msgid "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a flexible and robust boot loader and a good default choice for new users and old hands alike."
 msgstr ""
 
 #. Tag: para
@@ -1730,185 +1730,185 @@ msgstr ""
 #. Tag: para
 #: using-d-i.xml:2214
 #, no-c-format
-msgid "If you do not want to install grub at all, use the Back button to get to the main menu, and from there select whatever bootloader you would like to use."
+msgid "If you do not want to install grub, use the &BTN-GOBACK; button to get to the main menu, and from there select whatever bootloader you would like to use."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2228
+#: using-d-i.xml:2227
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2230
+#: using-d-i.xml:2229
 #, no-c-format
 msgid "The second &architecture; boot loader is called <quote>LILO</quote>. It is an old complex program which offers lots of functionality, including DOS, Windows, and OS/2 boot management. Please carefully read the instructions in the directory <filename>/usr/share/doc/lilo/</filename> if you have special needs; also see the <ulink url=\"&url-lilo-howto;\">LILO mini-HOWTO</ulink>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2240
+#: using-d-i.xml:2239
 #, no-c-format
 msgid "Currently the LILO installation will only create menu entries for other operating systems if these can be <firstterm>chainloaded</firstterm>. This means you may have to manually add a menu entry for operating systems like GNU/Linux and GNU/Hurd after the installation."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2248
+#: using-d-i.xml:2247
 #, no-c-format
 msgid "&d-i; offers you three choices on where to install the <command>LILO</command> boot loader:"
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2255
+#: using-d-i.xml:2254
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2255
+#: using-d-i.xml:2254
 #, no-c-format
 msgid "This way the <command>LILO</command> will take complete control of the boot process."
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2262
+#: using-d-i.xml:2261
 #, no-c-format
 msgid "new Debian partition"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2262
+#: using-d-i.xml:2261
 #, no-c-format
 msgid "Choose this if you want to use another boot manager. <command>LILO</command> will install itself at the beginning of the new Debian partition and it will serve as a secondary boot loader."
 msgstr ""
 
 #. Tag: term
-#: using-d-i.xml:2271
+#: using-d-i.xml:2270
 #, no-c-format
 msgid "Other choice"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2271
+#: using-d-i.xml:2270
 #, no-c-format
 msgid "Useful for advanced users who want to install <command>LILO</command> somewhere else. In this case you will be asked for desired location. You can use devfs style names, such as those that start with <filename>/dev/ide</filename>, <filename>/dev/scsi</filename>, and <filename>/dev/discs</filename>, as well as traditional names, such as <filename>/dev/hda</filename> or <filename>/dev/sda</filename>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2283
+#: using-d-i.xml:2282
 #, no-c-format
 msgid "If you can no longer boot into Windows 9x (or DOS) after this step, you'll need to use a Windows 9x (MS-DOS) boot disk and use the <userinput>fdisk /mbr</userinput> command to reinstall the MS-DOS master boot record &mdash; however, this means that you'll need to use some other way to get back into Debian!"
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2299
+#: using-d-i.xml:2298
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2301
+#: using-d-i.xml:2300
 #, no-c-format
 msgid "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled on the <quote>lilo</quote> boot loader for the x86 architecture and uses a similar configuration file. However, instead of writing an MBR or partition boot record to the disk, it copies the necessary files to a separate FAT formatted disk partition and modifies the <guimenuitem>EFI Boot Manager</guimenuitem> menu in the firmware to point to the files in the EFI partition. The <command>elilo</command> boot loader is really in two parts. The <filename>/usr/sbin/elilo</filename> command manages the partition and copies files into it. The <filename>elilo.efi</filename> program is copied into the EFI partition and then run by the <quote>EFI Boot Manager</quote> to do the actual work of loading and starting the Linux kernel."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2317
+#: using-d-i.xml:2316
 #, no-c-format
 msgid "The <quote>elilo</quote> configuration and installation is done as the last step of installing the packages of the base installation. &d-i; will present you with a list of potential disk partitions that it has found suitable for an EFI partition. Select the partition you set up earlier in the installation, typically a partition on the same disk that contains your <emphasis>root</emphasis> filesystem."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2329
+#: using-d-i.xml:2328
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2331
+#: using-d-i.xml:2330
 #, no-c-format
 msgid "The criteria for selecting a partition is that it is FAT format filesystem with its <emphasis>boot</emphasis> flag set. &d-i; may show multiple choices depending on what it finds from scanning all of the disks of the system including EFI partitions of other system disks and EFI diagnostic partitions. Remember, <command>elilo</command> may format the partition during the installation, erasing any previous contents!"
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2346
+#: using-d-i.xml:2345
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2348
+#: using-d-i.xml:2347
 #, no-c-format
 msgid "The EFI partition is a FAT filesystem format partition on one of the hard disks of the system, usually the same disk that contains the <emphasis>root</emphasis> filesystem. It is normally not mounted on a running system as it is only needed by the <quote>EFI Boot Manager</quote> to load the system and the installer part of the <command>elilo</command> writes to the filesystem directly. The <command>/usr/sbin/elilo</command> utility writes the following files into the <filename>efi/debian</filename> directory of the EFI partition during the installation. Note that the <quote>EFI Boot Manager</quote> would find these files using the path <filename>fs<replaceable>n</replaceable>:\\efi\\debian</filename>. There may be other files in this filesystem as well over time as the system is updated or re-configured."
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2370
+#: using-d-i.xml:2369
 #, no-c-format
 msgid "elilo.conf"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2371
+#: using-d-i.xml:2370
 #, no-c-format
 msgid "This is the configuration file read by the boot loader when it starts. It is a copy of the <filename>/etc/elilo.conf</filename> with the filenames re-written to refer to files in the EFI partition."
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2380
+#: using-d-i.xml:2379
 #, no-c-format
 msgid "elilo.efi"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2381
+#: using-d-i.xml:2380
 #, no-c-format
 msgid "This is the boot loader program that the <quote>EFI Boot Manager</quote> runs to boot the system. It is the program behind the <guimenuitem>Debian GNU/Linux</guimenuitem> menu item of the <quote>EFI Boot Manager</quote> command menu."
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2391
+#: using-d-i.xml:2390
 #, no-c-format
 msgid "initrd.img"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2392
+#: using-d-i.xml:2391
 #, no-c-format
 msgid "This is the initial root filesystem used to boot the kernel. It is a copy of the file referenced in the <filename>/etc/elilo.conf</filename>. In a standard Debian installation it would be the file in <filename>/boot</filename> pointed to by the symbolic link <filename>/initrd.img</filename>."
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2404
+#: using-d-i.xml:2403
 #, no-c-format
 msgid "readme.txt"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2405
+#: using-d-i.xml:2404
 #, no-c-format
 msgid "This is a small text file warning you that the contents of the directory are managed by the <command>elilo</command> and that any local changes would be lost at the next time <filename>/usr/sbin/elilo</filename> is run."
 msgstr ""
 
 #. Tag: filename
-#: using-d-i.xml:2415
+#: using-d-i.xml:2414
 #, no-c-format
 msgid "vmlinuz"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2416
+#: using-d-i.xml:2415
 #, no-c-format
 msgid "This is the compressed kernel itself. It is a copy of the file referenced in the <filename>/etc/elilo.conf</filename>. In a standard Debian installation it would be the file in <filename>/boot</filename> pointed to by the symbolic link <filename>/vmlinuz</filename>."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2436
+#: using-d-i.xml:2435
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2437
+#: using-d-i.xml:2436
 #, no-c-format
 msgid ""
       "The boot loader on SGI machines is <command>arcboot</command>. It has to be installed on the same hard disk as the kernel (this is done automatically by the installer). Arcboot supports different configurations which are set up in <filename>/etc/arcboot.conf</filename>. Each configuration has a unique name, the default setup as created by the installer is <quote>linux</quote>. After arcboot has been installed, the system can be booted from hard disk by setting some firmware environment variables entering <informalexample><screen>\n"
@@ -1921,61 +1921,61 @@ msgid ""
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2456
+#: using-d-i.xml:2455
 #, no-c-format
 msgid "scsi"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2457
+#: using-d-i.xml:2456
 #, no-c-format
 msgid "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the onboard controllers"
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2465
+#: using-d-i.xml:2464
 #, no-c-format
 msgid "disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2466
+#: using-d-i.xml:2465
 #, no-c-format
 msgid "is the SCSI ID of the hard disk on which <command>arcboot</command> is installed"
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2474 using-d-i.xml:2543
+#: using-d-i.xml:2473 using-d-i.xml:2542
 #, no-c-format
 msgid "partnr"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2475
+#: using-d-i.xml:2474
 #, no-c-format
 msgid "is the number of the partition on which <filename>/etc/arcboot.conf</filename> resides"
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2483
+#: using-d-i.xml:2482
 #, no-c-format
 msgid "config"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2484
+#: using-d-i.xml:2483
 #, no-c-format
 msgid "is the name of the configuration entry in <filename>/etc/arcboot.conf</filename>, which is <quote>linux</quote> by default."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2505
+#: using-d-i.xml:2504
 #, no-c-format
 msgid "<command>delo</command>-installer"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2506
+#: using-d-i.xml:2505
 #, no-c-format
 msgid ""
       "The boot loader on DECstations is <command>DELO</command>. It has to be installed on the same hard disk as the kernel (this is done automatically by the installer). DELO supports different configurations which are set up in <filename>/etc/delo.conf</filename>. Each configuration has a unique name, the default setup as created by the installer is <quote>linux</quote>. After DELO has been installed, the system can be booted from hard disk by entering <informalexample><screen>\n"
@@ -1984,201 +1984,201 @@ msgid ""
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2525
+#: using-d-i.xml:2524
 #, no-c-format
 msgid "<replaceable>#</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2526
+#: using-d-i.xml:2525
 #, no-c-format
 msgid "is the TurboChannel device to be booted from, on most DECstations this is <userinput>3</userinput> for the onboard controllers"
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2534
+#: using-d-i.xml:2533
 #, no-c-format
 msgid "<replaceable>id</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2535
+#: using-d-i.xml:2534
 #, no-c-format
 msgid "is the SCSI ID of the hard disk on which <command>DELO</command> is installed"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2544
+#: using-d-i.xml:2543
 #, no-c-format
 msgid "is the number of the partition on which <filename>/etc/delo.conf</filename> resides"
 msgstr ""
 
 #. Tag: replaceable
-#: using-d-i.xml:2552
+#: using-d-i.xml:2551
 #, no-c-format
 msgid "name"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2553
+#: using-d-i.xml:2552
 #, no-c-format
 msgid "is the name of the configuration entry in <filename>/etc/delo.conf</filename>, which is <quote>linux</quote> by default."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2563
+#: using-d-i.xml:2562
 #, no-c-format
 msgid "In case <filename>/etc/delo.conf</filename> is on the first partition on the disk and the default configuration shall be booted, it is sufficient to use"
 msgstr ""
 
 #. Tag: screen
-#: using-d-i.xml:2569
+#: using-d-i.xml:2568
 #, no-c-format
 msgid "<userinput>boot #/rz<replaceable>id</replaceable></userinput>"
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2579
+#: using-d-i.xml:2578
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2580
+#: using-d-i.xml:2579
 #, no-c-format
 msgid "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their boot loader. The installer will set up <command>yaboot</command> automatically, so all you need is a small 820k partition named <quote>bootstrap</quote> with type <emphasis>Apple_Bootstrap</emphasis> created back in the partitioning component. If this step completes successfully then your disk should now be bootable and OpenFirmware will be set to boot &debian;."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2598
+#: using-d-i.xml:2597
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2599
+#: using-d-i.xml:2598
 #, no-c-format
 msgid "The boot loader for OldWorld Power Macintosh machines is <command>quik</command>. You can also use it on CHRP. The installer will attempt to set up <command>quik</command> automatically. The setup has been known to work on 7200, 7300, and 7600 Powermacs, and on some Power Computing clones."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2615
+#: using-d-i.xml:2614
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2616
+#: using-d-i.xml:2615
 #, no-c-format
 msgid "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</command> is similar in configuration and usage to <command>LILO</command>, with a few exceptions. Please take a look at <quote>LINUX for &arch-title; Device Drivers and Installation Commands</quote> from IBM's developerWorks web site if you want to know more about <command>ZIPL</command>."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2633
+#: using-d-i.xml:2632
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2635
+#: using-d-i.xml:2634
 #, no-c-format
 msgid "The standard &architecture; boot loader is called <quote>silo</quote>. It is documented in <filename>/usr/share/doc/silo/</filename>. <command>SILO</command> is similar in configuration and usage to <command>LILO</command>, with a few exceptions. First of all, <command>SILO</command> allows you to boot any kernel image on your drive, even if it is not listed in <filename>/etc/silo.conf</filename>. This is because <command>SILO</command> can actually read Linux partitions. Also, <filename>/etc/silo.conf</filename> is read at boot time, so there is no need to rerun <command>silo</command> after installing a new kernel like you would with <command>LILO</command>. <command>SILO</command> can also read UFS partitions, which means it can boot SunOS/Solaris partitions as well. This is useful if you want to install GNU/Linux alongside an existing SunOS/Solaris install."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2660
+#: using-d-i.xml:2659
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2662
+#: using-d-i.xml:2661
 #, no-c-format
 msgid "This option can be used to complete the installation even when no boot loader is to be installed, either because the arch/subarch doesn't provide one, or because none is desired (e.g. you will use existing boot loader). <phrase arch=\"m68k\">This option is especially useful for Macintosh, Atari, and Amiga systems, where the original operating system must be maintained on the box and used to boot GNU/Linux.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2671
+#: using-d-i.xml:2670
 #, no-c-format
 msgid "If you plan to manually configure your bootloader, you should check the name of the installed kernel in <filename>/target/boot</filename>. You should also check that directory for the presence of an <firstterm>initrd</firstterm>; if one is present, you will probably have to instruct your bootloader to use it. Other information you will need are the disk and partition you selected for your <filename>/</filename> filesystem and, if you chose to install <filename>/boot</filename> on a separate partition, also your <filename>/boot</filename> filesystem."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2688
+#: using-d-i.xml:2687
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2689
+#: using-d-i.xml:2688
 #, no-c-format
 msgid "These are the last bits to do before rebooting to your new system. It mostly consists of tidying up after the &d-i;."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2701
+#: using-d-i.xml:2700
 #, no-c-format
 msgid "Finish the Installation and Reboot"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2703
+#: using-d-i.xml:2702
 #, no-c-format
 msgid "This is the last step in the initial Debian installation process. You will be prompted to remove the boot media (CD, floppy, etc) that you used to boot the installer. The installer will do any last minute tasks, and then reboot into your new Debian system."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2710
+#: using-d-i.xml:2709
 #, no-c-format
 msgid "Select the <guimenuitem>Finish the installation</guimenuitem> menu item which will halt the system because rebooting is not supported on &arch-title; in this case. You then need to IPL GNU/Linux from the DASD which you selected for the root filesystem during the first steps of the installation."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2724
+#: using-d-i.xml:2723
 #, no-c-format
 msgid "Miscellaneous"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2725
+#: using-d-i.xml:2724
 #, no-c-format
 msgid "The components listed in this section are usually not involved in the installation process, but are waiting in the background to help the user in case something goes wrong."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2738
+#: using-d-i.xml:2737
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2740
+#: using-d-i.xml:2739
 #, no-c-format
 msgid "If the installation is successful, the logfiles created during the installation process will be automatically saved to <filename>/var/log/installer/</filename> on your new Debian system."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2747
+#: using-d-i.xml:2746
 #, no-c-format
 msgid "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu allows you to save the log files to a floppy disk, network, hard disk, or other media. This can be useful if you encounter fatal problems during the installation and wish to study the logs on another system or attach them to an installation report."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2767
+#: using-d-i.xml:2766
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2769
+#: using-d-i.xml:2768
 #, no-c-format
 msgid "There are several methods you can use to get a shell while running an installation. On most systems, and if you are not installing over serial console, the easiest method is to switch to the second <emphasis>virtual console</emphasis> by pressing <keycombo><keycap>Left Alt</keycap> <keycap>F2</keycap></keycombo><footnote> <para> That is: press the <keycap>Alt</keycap> key on the left-hand side of the <keycap>space bar</keycap> and the <keycap>F2</keycap> function key at the same time. </para> </footnote> (on a Mac keyboard, <keycombo><keycap>Option</keycap> <keycap>F2</keycap></keycombo>). Use <keycombo><keycap>Left Alt</keycap> <keycap>F1</keycap></keycombo> to switch back to installer itself."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2787
+#: using-d-i.xml:2786
 #, no-c-format
-msgid "If you cannot switch consoles, there is also an <guimenuitem>Execute a Shell</guimenuitem> item on the main menu that can be used to start a shell. To get back to the installer itself, type <userinput>exit</userinput> to close the shell."
+msgid "If you cannot switch consoles, there is also an <guimenuitem>Execute a Shell</guimenuitem> item on the main menu that can be used to start a shell. You can get to the main menu from most dialogs by using the &BTN-GOBACK; button one or more times. Type <userinput>exit</userinput> to close the shell and return to the installer."
 msgstr ""
 
 #. Tag: para