[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 169 insertions, 193 deletions

diff --git a/po/pot/install-methods.pot b/po/pot/install-methods.pot
index 507a95355..072d95889 100644
--- a/po/pot/install-methods.pot
+++ b/po/pot/install-methods.pot
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2009-02-18 01:09+0000\n"
+"POT-Creation-Date: 2009-05-03 00:14+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -107,185 +107,161 @@ msgstr ""
 #. Tag: title
 #: install-methods.xml:151
 #, no-c-format
-msgid "Netwinder Installation Files"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:152
-#, no-c-format
-msgid "The easiest way to boot a Netwinder is over the network, using the supplied TFTP image &netwinder-boot-img;."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:161
-#, no-c-format
-msgid "CATS Installation Files"
-msgstr ""
-
-#. Tag: para
-#: install-methods.xml:162
-#, no-c-format
-msgid "CATS can be booted either via the network or from CD-ROM. The kernel and initrd can be obtained from &cats-boot-img;."
-msgstr ""
-
-#. Tag: title
-#: install-methods.xml:171
-#, no-c-format
 msgid "NSLU2 Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:172
+#: install-methods.xml:152
 #, no-c-format
 msgid "A firmware image is provided for the Linksys NSLU2 which will automatically boot <classname>debian-installer</classname>. This image can be uploaded via the Linksys web frontend or with upslug2. This firmware image can be obtained from &nslu2-firmware-img;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:184
+#: install-methods.xml:164
 #, no-c-format
 msgid "Thecus N2100 Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:185
+#: install-methods.xml:165
 #, no-c-format
 msgid "A firmware image is provided for the Thecus N2100 which will automatically boot <classname>debian-installer</classname>. This image can be installed using the Thecus firmware upgrade process. This firmware image can be obtained from &n2100-firmware-img;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:196
+#: install-methods.xml:176
 #, no-c-format
 msgid "GLAN Tank Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:197
+#: install-methods.xml:177
 #, no-c-format
 msgid "The GLAN Tank requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install Debian. These images can be obtained from &glantank-firmware-img;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:207
+#: install-methods.xml:187
 #, no-c-format
 msgid "Kurobox Pro Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:208
+#: install-methods.xml:188
 #, no-c-format
 msgid "The Kurobox Pro requires a kernel and ramdisk on an ext2 partition on the disk on which you intend to install Debian. These images can be obtained from &kuroboxpro-firmware-img;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:218
+#: install-methods.xml:198
 #, no-c-format
 msgid "HP mv2120 Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:219
+#: install-methods.xml:199
 #, no-c-format
 msgid "A firmware image is provided for the HP mv2120 which will automatically boot <classname>debian-installer</classname>. This image can be installed with uphpmvault on Linux and other systems and with the HP Media Vault Firmware Recovery Utility on Windows. The firmware image can be obtained from &mv2120-firmware-img;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:231
+#: install-methods.xml:211
 #, no-c-format
 msgid "QNAP Turbo Station Installation Files"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:232
+#: install-methods.xml:212
 #, no-c-format
 msgid "The QNAP Turbo Station (TS-109, TS-209 and TS-409) requires a kernel and ramdisk which can be obtained from &qnap-firmware-img;. A script is provided to write these images to flash."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:278
+#: install-methods.xml:258
 #, no-c-format
 msgid "Choosing a Kernel"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:280
+#: install-methods.xml:260
 #, no-c-format
 msgid "Some m68k subarchs have a choice of kernels to install. In general we recommend trying the most recent version first. If your subarch or machine needs to use a 2.2.x kernel, make sure you choose one of the images that supports 2.2.x kernels (see the <ulink url=\"&disturl;/main/installer-&architecture;/current/images/MANIFEST\">MANIFEST</ulink>)."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:289
+#: install-methods.xml:269
 #, no-c-format
 msgid "All of the m68k images for use with 2.2.x kernels, require the kernel parameter &ramdisksize;."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:307
+#: install-methods.xml:287
 #, no-c-format
 msgid "Creating an IPL tape"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:309
+#: install-methods.xml:289
 #, no-c-format
 msgid "If you can't boot (IPL) from the CD-ROM and you are not using VM you need to create an IPL tape first. This is described in section 3.4.3 in the <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf\"> Linux for IBM eServer zSeries and S/390: Distributions</ulink> Redbook. The files you need to write to the tape are (in this order): <filename>kernel.debian</filename>, <filename>parmfile.debian</filename> and <filename>initrd.debian</filename>. The files can be downloaded from the <filename>tape</filename> sub-directory, see <xref linkend=\"where-files\"/>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:333
+#: install-methods.xml:313
 #, no-c-format
 msgid "Creating Floppies from Disk Images"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:334
+#: install-methods.xml:314
 #, no-c-format
 msgid "Bootable floppy disks are generally used as a last resort to boot the installer on hardware that cannot boot from CD or by other means."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:339
+#: install-methods.xml:319
 #, no-c-format
 msgid "Booting the installer from floppy disk reportedly fails on Mac USB floppy drives."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:344
+#: install-methods.xml:324
 #, no-c-format
 msgid "Booting the installer from floppy disk is not supported on Amigas or 68k Macs."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:349
+#: install-methods.xml:329
 #, no-c-format
 msgid "Disk images are files containing the complete contents of a floppy disk in <emphasis>raw</emphasis> form. Disk images, such as <filename>boot.img</filename>, cannot simply be copied to floppy drives. A special program is used to write the image files to floppy disk in <emphasis>raw</emphasis> mode. This is required because these images are raw representations of the disk; it is required to do a <emphasis>sector copy</emphasis> of the data from the file onto the floppy."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:360
+#: install-methods.xml:340
 #, no-c-format
 msgid "There are different techniques for creating floppies from disk images. This section describes how to create floppies from disk images on different platforms."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:366
+#: install-methods.xml:346
 #, no-c-format
 msgid "Before you can create the floppies, you will first need to download them from one of the Debian mirrors, as explained in <xref linkend=\"downloading-files\"/>. <phrase arch=\"i386\">If you already have an installation CD-ROM or DVD, the floppy images may also be included on the CD/DVD.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:374
+#: install-methods.xml:354
 #, no-c-format
 msgid "No matter which method you use to create your floppies, you should remember to flip the write-protect tab on the floppies once you have written them, to ensure they are not damaged unintentionally."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:382
+#: install-methods.xml:362
 #, no-c-format
 msgid "Writing Disk Images From a Linux or Unix System"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:383
+#: install-methods.xml:363
 #, no-c-format
 msgid ""
       "To write the floppy disk image files to the floppy disks, you will probably need root access to the system. Place a good, blank floppy in the floppy drive. Next, use the command <informalexample><screen>\n"
@@ -294,283 +270,283 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:404
+#: install-methods.xml:384
 #, no-c-format
 msgid "Some systems attempt to automatically mount a floppy disk when you place it in the drive. You might have to disable this feature before the workstation will allow you to write a floppy in <emphasis>raw mode</emphasis>. Unfortunately, how to accomplish this will vary based on your operating system. <phrase arch=\"sparc\"> On Solaris, you can work around volume management to get raw access to the floppy. First, make sure that the floppy is auto-mounted (using <command>volcheck</command> or the equivalent command in the file manager). Then use a <command>dd</command> command of the form given above, just replace <filename>/dev/fd0</filename> with <filename>/vol/rdsk/<replaceable>floppy_name</replaceable></filename>, where <replaceable>floppy_name</replaceable> is the name the floppy disk was given when it was formatted (unnamed floppies default to the name <filename>unnamed_floppy</filename>). On other systems, ask your system administrator. </phrase>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:425
+#: install-methods.xml:405
 #, no-c-format
 msgid "If writing a floppy on powerpc Linux, you will need to eject it. The <command>eject</command> program handles this nicely; you might need to install it."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:443
+#: install-methods.xml:423
 #, no-c-format
 msgid "Writing Disk Images From DOS, Windows, or OS/2"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:445
+#: install-methods.xml:425
 #, no-c-format
 msgid "If you have access to an i386 or amd64 machine, you can use one of the following programs to copy images to floppies."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:450
+#: install-methods.xml:430
 #, no-c-format
 msgid "The <command>rawrite1</command> and <command>rawrite2</command> programs can be used under MS-DOS. To use these programs, first make sure that you are booted into DOS. Trying to use these programs from within a DOS box in Windows, or double-clicking on these programs from the Windows Explorer is <emphasis>not</emphasis> expected to work."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:458
+#: install-methods.xml:438
 #, no-c-format
 msgid "The <command>rwwrtwin</command> program runs on Windows 95, NT, 98, 2000, ME, XP and probably later versions. To use it you will need to unpack diskio.dll in the same directory."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:464
+#: install-methods.xml:444
 #, no-c-format
 msgid "These tools can be found on the Official Debian CD-ROMs under the <filename>/tools</filename> directory."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:477
+#: install-methods.xml:457
 #, no-c-format
 msgid "Writing Disk Images on Atari Systems"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:478
+#: install-methods.xml:458
 #, no-c-format
 msgid "You'll find the &rawwrite.ttp; program in the same directory as the floppy disk images. Start the program by double clicking on the program icon, and type in the name of the floppy image file you want written to the floppy at the TOS program command line dialog box."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:489
+#: install-methods.xml:469
 #, no-c-format
 msgid "Writing Disk Images on Macintosh Systems"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:490
+#: install-methods.xml:470
 #, no-c-format
 msgid "Since the current release does not yet support booting from floppies to start the installation, there would be no point in doing this on Macintosh Systems. However, these files are needed for the installation of the operating system and modules, later in the process."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:506
+#: install-methods.xml:486
 #, no-c-format
 msgid "Writing Disk Images From MacOS"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:507
+#: install-methods.xml:487
 #, no-c-format
 msgid "An AppleScript, <application>Make Debian Floppy</application>, is available for burning floppies from the provided disk image files. It can be downloaded from <ulink url=\"ftp://ftp2.sourceforge.net/pub/sourceforge/d/de/debian-imac/MakeDebianFloppy.sit\"></ulink>. To use it, just unstuff it on your desktop, and then drag any floppy image file to it. You must have Applescript installed and enabled in your extensions manager. Disk Copy will ask you to confirm that you wish to erase the floppy and proceed to write the file image to it."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:518
+#: install-methods.xml:498
 #, no-c-format
 msgid "You can also use the MacOS utility <command>Disk Copy</command> directly, or the freeware utility <command>suntar</command>. The <filename>root.bin</filename> file is an example of a floppy image. Use one of the following methods to create a floppy from the floppy image with these utilities."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:529
+#: install-methods.xml:509
 #, no-c-format
 msgid "Writing Disk Images with <command>Disk Copy</command>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:530
+#: install-methods.xml:510
 #, no-c-format
 msgid "If you are creating the floppy image from files which were originally on the official &debian; CD, then the Type and Creator are already set correctly. The following <command>Creator-Changer</command> steps are only necessary if you downloaded the image files from a Debian mirror."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:539
+#: install-methods.xml:519
 #, no-c-format
 msgid "Obtain <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</ulink> and use it to open the <filename>root.bin</filename> file."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:526
 #, no-c-format
 msgid "Change the Creator to <userinput>ddsk</userinput> (Disk Copy), and the Type to <userinput>DDim</userinput> (binary floppy image). The case is sensitive for these fields."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:553
+#: install-methods.xml:533
 #, no-c-format
 msgid "<emphasis>Important:</emphasis> In the Finder, use <userinput>Get Info</userinput> to display the Finder information about the floppy image, and <quote>X</quote> the <userinput>File Locked</userinput> check box so that MacOS will be unable to remove the boot blocks if the image is accidentally mounted."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:562
+#: install-methods.xml:542
 #, no-c-format
 msgid "Obtain <command>Disk Copy</command>; if you have a MacOS system or CD it will very likely be there already, otherwise try <ulink url=\"&url-powerpc-diskcopy;\"></ulink>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:569
+#: install-methods.xml:549
 #, no-c-format
 msgid "Run <command>Disk Copy</command>, and select <menuchoice> <guimenu>Utilities</guimenu> <guimenuitem>Make a Floppy</guimenuitem> </menuchoice>, then select the <emphasis>locked</emphasis> image file from the resulting dialog. It will ask you to insert a floppy, then ask if you really want to erase it. When done it should eject the floppy."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:584
+#: install-methods.xml:564
 #, no-c-format
 msgid "Writing Disk Images with <command>suntar</command>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:588
+#: install-methods.xml:568
 #, no-c-format
 msgid "Obtain <command>suntar</command> from <ulink url=\"&url-powerpc-suntar;\"> </ulink>. Start the <command>suntar</command> program and select <quote>Overwrite Sectors...</quote> from the <userinput>Special</userinput> menu."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:596
+#: install-methods.xml:576
 #, no-c-format
 msgid "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:602
+#: install-methods.xml:582
 #, no-c-format
 msgid "Select the <filename>root.bin</filename> file in the file-opening dialog."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:607
+#: install-methods.xml:587
 #, no-c-format
 msgid "After the floppy has been created successfully, select <menuchoice> <guimenu>File</guimenu> <guimenuitem>Eject</guimenuitem> </menuchoice>. If there are any errors writing the floppy, simply toss that floppy and try another."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:615
+#: install-methods.xml:595
 #, no-c-format
 msgid "Before using the floppy you created, <emphasis>set the write protect tab</emphasis>! Otherwise if you accidentally mount it in MacOS, MacOS will helpfully ruin it."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:634
+#: install-methods.xml:614
 #, no-c-format
 msgid "Preparing Files for USB Memory Stick Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:636
+#: install-methods.xml:616
 #, no-c-format
 msgid "There are two installation methods possible when booting from USB stick. The first is to install completely from the network. The second is to also copy a CD image onto the USB stick and use that as a source for packages, possibly in combination with a mirror. This second method is the more common."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:644
+#: install-methods.xml:624
 #, no-c-format
 msgid "For the first installation method you'll need to download an installer image from the <filename>netboot</filename> directory (at the location mentioned in <xref linkend=\"where-files\"/>) and use the <quote>flexible way</quote> explained below to copy the files to the USB stick."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:652
+#: install-methods.xml:632
 #, no-c-format
 msgid "Installation images for the second installation method can be found in the <filename>hd-media</filename> directory and either the <quote>easy way</quote> or the <quote>flexible way</quote> can be used to copy the image to the USB stick. For this installation method you will also need to download a CD image. The installation image and the CD image must be based on the same release of &d-i;. If they do not match you are likely to get errors<footnote> <para> The error message that is most likely to be displayed is that no kernel modules can be found. This means that the version of the kernel module udebs included on the CD image is different from the version of the running kernel. </para> </footnote> during the installation."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:671
+#: install-methods.xml:651
 #, no-c-format
 msgid "To prepare the USB stick, you will need a system where GNU/Linux is already running and where USB is supported. With current GNU/Linux systems the USB stick should be automatically recognized when you insert it. If it is not you should check that the usb-storage kernel module is loaded. When the USB stick is inserted, it will be mapped to a device named <filename>/dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. You should be able to see to which device the USB stick was mapped by running the command <command>dmesg</command> after inserting it. To write to your stick, you may have to turn off its write protection switch."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:685
+#: install-methods.xml:665
 #, no-c-format
 msgid "The procedures described in this section will destroy anything already on the device! Make very sure that you use the correct device name for your USB stick. If you use the wrong device the result could be that all information on for example a hard disk could be lost."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:693
+#: install-methods.xml:673
 #, no-c-format
 msgid "Note that the USB stick should be at least 256 MB in size (smaller setups are possible if you follow <xref linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:701
+#: install-methods.xml:681
 #, no-c-format
 msgid "Copying the files &mdash; the easy way"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:702
+#: install-methods.xml:682
 #, no-c-format
 msgid "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> which contains all the installer files (including the kernel) <phrase arch=\"x86\">as well as <classname>syslinux</classname> and its configuration file.</phrase> <phrase arch=\"powerpc\">as well as <classname>yaboot</classname> and its configuration file.</phrase>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:711
+#: install-methods.xml:691
 #, no-c-format
 msgid "Note that, although convenient, this method does have one major disadvantage: the logical size of the device will be limited to 256 MB, even if the capacity of the USB stick is larger. You will need to repartition the USB stick and create new file systems to get its full capacity back if you ever want to use it for some different purpose. A second disadvantage is that you cannot copy a full CD image onto the USB stick, but only the smaller businesscard or netinst CD images."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:721
+#: install-methods.xml:701
 #, no-c-format
 msgid "To use this image simply extract it directly to your USB stick:"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:725
+#: install-methods.xml:705
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:727
+#: install-methods.xml:707
 #, no-c-format
 msgid "Create a partition of type \"Apple_Bootstrap\" on your USB stick using <command>mac-fdisk</command>'s <userinput>C</userinput> command and extract the image directly to that:"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:733
+#: install-methods.xml:713
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:735
+#: install-methods.xml:715
 #, no-c-format
 msgid "After that, mount the USB memory stick <phrase arch=\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc\">an HFS filesystem</phrase> on it, and copy a Debian netinst or businesscard ISO image to it. Unmount the stick (<userinput>umount /mnt</userinput>) and you are done."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:752
+#: install-methods.xml:732
 #, no-c-format
 msgid "Copying the files &mdash; the flexible way"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:753
+#: install-methods.xml:733
 #, no-c-format
 msgid "If you like more flexibility or just want to know what's going on, you should use the following method to put the files on your stick. One advantage of using this method is that &mdash; if the capacity of your USB stick is large enough &mdash; you have the option of copying a full CD ISO image to it."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:768 install-methods.xml:865
+#: install-methods.xml:748 install-methods.xml:845
 #, no-c-format
 msgid "Partitioning the USB stick"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:769
+#: install-methods.xml:749
 #, no-c-format
 msgid "We will show how to set up the memory stick to use the first partition, instead of the entire device."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:774
+#: install-methods.xml:754
 #, no-c-format
 msgid ""
       "Since most USB sticks come pre-configured with a single FAT16 partition, you probably won't have to repartition or reformat the stick. If you have to do that anyway, use <command>cfdisk</command> or any other partitioning tool to create a FAT16 partition, and then create the filesystem using: <informalexample><screen>\n"
@@ -579,13 +555,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:788
+#: install-methods.xml:768
 #, no-c-format
 msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. Although any boot loader (e.g. <classname>lilo</classname>) should work, it's convenient to use <classname>syslinux</classname>, since it uses a FAT16 partition and can be reconfigured by just editing a text file. Any operating system which supports the FAT file system can be used to make changes to the configuration of the boot loader."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:798
+#: install-methods.xml:778
 #, no-c-format
 msgid ""
       "To put <classname>syslinux</classname> on the FAT16 partition on your USB stick, install the <classname>syslinux</classname> and <classname>mtools</classname> packages on your system, and do: <informalexample><screen>\n"
@@ -594,19 +570,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:815 install-methods.xml:912
+#: install-methods.xml:795 install-methods.xml:892
 #, no-c-format
 msgid "Adding the installer image"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:816
+#: install-methods.xml:796
 #, no-c-format
 msgid "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /mnt</userinput>) and copy the following installer image files to the stick: <itemizedlist> <listitem><para> <filename>vmlinuz</filename> (kernel binary) </para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </para></listitem> </itemizedlist> You can choose between either the regular version or the graphical version of the installer. The latter can be found in the <filename>gtk</filename> subdirectory. If you want to rename the files, please note that <classname>syslinux</classname> can only process DOS (8.3) file names."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:840
+#: install-methods.xml:820
 #, no-c-format
 msgid ""
       "Next you should create a <filename>syslinux.cfg</filename> configuration file, which at a bare minimum should contain the following two lines: <informalexample><screen>\n"
@@ -616,13 +592,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:850 install-methods.xml:952
+#: install-methods.xml:830 install-methods.xml:932
 #, no-c-format
 msgid "If you used an <filename>hd-media</filename> image, you should now copy a Debian ISO image (businesscard, netinst or full CD image; be sure to select one that fits) onto the stick. When you are done, unmount the USB memory stick (<userinput>umount /mnt</userinput>)."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:866
+#: install-methods.xml:846
 #, no-c-format
 msgid ""
       "Most USB sticks do not come pre-configured in such a way that Open Firmware can boot from them, so you will need to repartition the stick. On Mac systems, run <userinput>mac-fdisk /dev/<replaceable>sdX</replaceable></userinput>, initialise a new partition map using the <userinput>i</userinput> command, and create a new partition of type Apple_Bootstrap using the <userinput>C</userinput> command. (Note that the first \"partition\" will always be the partition map itself.) Then type <informalexample><screen>\n"
@@ -631,13 +607,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:883
+#: install-methods.xml:863
 #, no-c-format
 msgid "In order to start the kernel after booting from the USB stick, we will put a boot loader on the stick. The <command>yaboot</command> boot loader can be installed on an HFS filesystem and can be reconfigured by just editing a text file. Any operating system which supports the HFS file system can be used to make changes to the configuration of the boot loader."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:892
+#: install-methods.xml:872
 #, no-c-format
 msgid ""
       "The normal <command>ybin</command> tool that comes with <command>yaboot</command> does not yet understand USB storage devices, so you will have to install <command>yaboot</command> by hand using the <classname>hfsutils</classname> tools. Type <informalexample><screen>\n"
@@ -650,37 +626,37 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:913
+#: install-methods.xml:893
 #, no-c-format
 msgid "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /mnt</userinput>) and copy the following installer image files to the stick:"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:920
+#: install-methods.xml:900
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:925
+#: install-methods.xml:905
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:930
+#: install-methods.xml:910
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:935
+#: install-methods.xml:915
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:942
+#: install-methods.xml:922
 #, no-c-format
 msgid ""
       "The <filename>yaboot.conf</filename> configuration file should contain the following lines: <informalexample><screen>\n"
@@ -698,259 +674,259 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:967
+#: install-methods.xml:947
 #, no-c-format
 msgid "Booting the USB stick"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:968
+#: install-methods.xml:948
 #, no-c-format
 msgid "If your system refuses to boot from the memory stick, the stick may contain an invalid master boot record (MBR). To fix this, use the <command>install-mbr</command> command from the package <classname>mbr</classname>:"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:975
+#: install-methods.xml:955
 #, no-c-format
 msgid "# install-mbr /dev/<replaceable>sdX</replaceable>"
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:986
+#: install-methods.xml:966
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:987
+#: install-methods.xml:967
 #, no-c-format
 msgid "The installer may be booted using boot files placed on an existing hard drive partition, either launched from another operating system or by invoking a boot loader directly from the BIOS."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:993
+#: install-methods.xml:973
 #, no-c-format
 msgid "A full, <quote>pure network</quote> installation can be achieved using this technique. This avoids all hassles of removable media, like finding and burning CD images or struggling with too numerous and unreliable floppy disks."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1000
+#: install-methods.xml:980
 #, no-c-format
 msgid "The installer cannot boot from files on an NTFS file system."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1004
+#: install-methods.xml:984
 #, no-c-format
 msgid "The installer cannot boot from files on an HFS+ file system. MacOS System 8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. To determine whether your existing file system is HFS+, select <userinput>Get Info</userinput> for the volume in question. HFS file systems appear as <userinput>Mac OS Standard</userinput>, while HFS+ file systems say <userinput>Mac OS Extended</userinput>. You must have an HFS partition in order to exchange files between MacOS and Linux, in particular the installation files you download."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1015
+#: install-methods.xml:995
 #, no-c-format
 msgid "Different programs are used for hard disk installation system booting, depending on whether the system is a <quote>NewWorld</quote> or an <quote>OldWorld</quote> model."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1024
+#: install-methods.xml:1004
 #, no-c-format
 msgid "Hard disk installer booting using <command>LILO</command> or <command>GRUB</command>"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1026
+#: install-methods.xml:1006
 #, no-c-format
 msgid "This section explains how to add to or even replace an existing linux installation using either <command>LILO</command> or <command>GRUB</command>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1032
+#: install-methods.xml:1012
 #, no-c-format
 msgid "At boot time, both bootloaders support loading in memory not only the kernel, but also a disk image. This RAM disk can be used as the root file-system by the kernel."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1038
+#: install-methods.xml:1018
 #, no-c-format
 msgid "Copy the following files from the Debian archives to a convenient location on your hard drive, for instance to <filename>/boot/newinstall/</filename>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1045
+#: install-methods.xml:1025
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1050
+#: install-methods.xml:1030
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1057
+#: install-methods.xml:1037
 #, no-c-format
 msgid "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd\"/>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1067
+#: install-methods.xml:1047
 #, no-c-format
 msgid "Hard Disk Installer Booting for OldWorld Macs"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1068
+#: install-methods.xml:1048
 #, no-c-format
 msgid "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</application> to launch Linux installation, but <application>miBoot</application> cannot easily be used for hard disk booting. <application>BootX</application>, launched from MacOS, supports booting from files placed on the hard disk. <application>BootX</application> can also be used to dual-boot MacOS and Linux after your Debian installation is complete. For the Performa 6360, it appears that <command>quik</command> cannot make the hard disk bootable. So <application>BootX</application> is required on that model."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1081
+#: install-methods.xml:1061
 #, no-c-format
 msgid "Download and unstuff the <application>BootX</application> distribution, available from <ulink url=\"&url-powerpc-bootx;\"></ulink>, or in the <filename>dists/woody/main/disks-powerpc/current/powermac</filename> directory on Debian http/ftp mirrors and official Debian CDs. Use <application>Stuffit Expander</application> to extract it from its archive. Within the package, there is an empty folder called <filename>Linux Kernels</filename>. Download <filename>linux.bin</filename> and <filename>ramdisk.image.gz</filename> from the <filename>disks-powerpc/current/powermac</filename> folder, and place them in the <filename>Linux Kernels</filename> folder. Then place the <filename>Linux Kernels</filename> folder in the active System Folder."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1101
+#: install-methods.xml:1081
 #, no-c-format
 msgid "Hard Disk Installer Booting for NewWorld Macs"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1102
+#: install-methods.xml:1082
 #, no-c-format
 msgid "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as well as loading ELF binaries directly from the hard disk. These machines will boot Linux directly via <command>yaboot</command>, which supports loading a kernel and RAMdisk directly from an ext2 partition, as well as dual-booting with MacOS. Hard disk booting of the installer is particularly appropriate for newer machines without floppy drives. <command>BootX</command> is not supported and must not be used on NewWorld PowerMacs."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1113
+#: install-methods.xml:1093
 #, no-c-format
 msgid "<emphasis>Copy</emphasis> (not move) the following four files which you downloaded earlier from the Debian archives, onto the root level of your hard drive (this can be accomplished by <keycap>option</keycap>-dragging each file to the hard drive icon)."
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1123 install-methods.xml:1480
+#: install-methods.xml:1103 install-methods.xml:1460
 #, no-c-format
 msgid "vmlinux"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1128 install-methods.xml:1485
+#: install-methods.xml:1108 install-methods.xml:1465
 #, no-c-format
 msgid "initrd.gz"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1133 install-methods.xml:1490
+#: install-methods.xml:1113 install-methods.xml:1470
 #, no-c-format
 msgid "yaboot"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1138 install-methods.xml:1495
+#: install-methods.xml:1118 install-methods.xml:1475
 #, no-c-format
 msgid "yaboot.conf"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1143
+#: install-methods.xml:1123
 #, no-c-format
 msgid "Make a note of the partition number of the MacOS partition where you place these files. If you have the MacOS <command>pdisk</command> program, you can use the <command>L</command> command to check for the partition number. You will need this partition number for the command you type at the Open Firmware prompt when you boot the installer."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1151
+#: install-methods.xml:1131
 #, no-c-format
 msgid "To boot the installer, proceed to <xref linkend=\"boot-newworld\"/>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1164
+#: install-methods.xml:1144
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1165
+#: install-methods.xml:1145
 #, no-c-format
 msgid "If your machine is connected to a local area network, you may be able to boot it over the network from another machine, using TFTP. If you intend to boot the installation system from another machine, the boot files will need to be placed in specific locations on that machine, and the machine configured to support booting of your specific machine."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1173
+#: install-methods.xml:1153
 #, no-c-format
 msgid "You need to set up a TFTP server, and for many machines a DHCP server<phrase condition=\"supports-rarp\">, or RARP server</phrase><phrase condition=\"supports-bootp\">, or BOOTP server</phrase>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1180
+#: install-methods.xml:1160
 #, no-c-format
 msgid "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol (RARP) is one way to tell your client what IP address to use for itself. Another way is to use the BOOTP protocol.</phrase> <phrase condition=\"supports-bootp\">BOOTP is an IP protocol that informs a computer of its IP address and where on the network to obtain a boot image.</phrase> <phrase arch=\"m68k\">Yet another alternative exists on VMEbus systems: the IP address can be manually configured in boot ROM.</phrase> The DHCP (Dynamic Host Configuration Protocol) is a more flexible, backwards-compatible extension of BOOTP. Some systems can only be configured via DHCP."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1197
+#: install-methods.xml:1177
 #, no-c-format
 msgid "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good idea to use DHCP instead of BOOTP. Some of the latest machines are unable to boot using BOOTP."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1203
+#: install-methods.xml:1183
 #, no-c-format
 msgid "Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM console will <emphasis>not</emphasis> use RARP to obtain its IP address, and therefore you must use BOOTP for net booting your Alpha<footnote> <para> Alpha systems can also be net-booted using the DECNet MOP (Maintenance Operations Protocol), but this is not covered here. Presumably, your local OpenVMS operator will be happy to assist you should you have some burning need to use MOP to boot Linux on your Alpha. </para> </footnote>. You can also enter the IP configuration for network interfaces directly in the SRM console."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1220
+#: install-methods.xml:1200
 #, no-c-format
 msgid "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There is an <classname>rbootd</classname> package available in Debian."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1225
+#: install-methods.xml:1205
 #, no-c-format
 msgid "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to the client. Theoretically, any server, on any platform, which implements these protocols, may be used. In the examples in this section, we shall provide commands for SunOS 4.x, SunOS 5.x (a.k.a. Solaris), and GNU/Linux."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1233
+#: install-methods.xml:1213
 #, no-c-format
 msgid "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, you will need a TFTP server with <userinput>tsize</userinput> support. On a &debian; server, the <classname>atftpd</classname> and <classname>tftpd-hpa</classname> packages qualify; we recommend <classname>tftpd-hpa</classname>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1251
+#: install-methods.xml:1231
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1252
+#: install-methods.xml:1232
 #, no-c-format
 msgid "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC address) of the client computers to be installed. If you don't know this information, you can <phrase arch=\"sparc\"> pick it off the initial OpenPROM boot messages, use the OpenBoot <userinput>.enet-addr</userinput> command, or </phrase> boot into <quote>Rescue</quote> mode (e.g., from the rescue floppy) and use the command <userinput>/sbin/ifconfig eth0</userinput>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1264
+#: install-methods.xml:1244
 #, no-c-format
 msgid "On a RARP server system using a Linux 2.4 or 2.6 kernel, or Solaris/SunOS, you use the <command>rarpd</command> program. You need to ensure that the Ethernet hardware address for the client is listed in the <quote>ethers</quote> database (either in the <filename>/etc/ethers</filename> file, or via NIS/NIS+) and in the <quote>hosts</quote> database. Then you need to start the RARP daemon. Issue the command (as root): <userinput>/usr/sbin/rarpd -a</userinput> on most Linux systems and SunOS 5 (Solaris 2), <userinput>/usr/sbin/in.rarpd -a</userinput> on some other Linux systems, or <userinput>/usr/etc/rarpd -a</userinput> in SunOS 4 (Solaris 1)."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1286
+#: install-methods.xml:1266
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1287
+#: install-methods.xml:1267
 #, no-c-format
 msgid "There are two BOOTP servers available for GNU/Linux. The first is CMU <command>bootpd</command>. The other is actually a DHCP server: ISC <command>dhcpd</command>. In &debian; these are contained in the <classname>bootp</classname> and <classname>dhcp3-server</classname> packages respectively."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1295
+#: install-methods.xml:1275
 #, no-c-format
 msgid ""
       "To use CMU <command>bootpd</command>, you must first uncomment (or add) the relevant line in <filename>/etc/inetd.conf</filename>. On &debian;, you can run <userinput>update-inetd --enable bootps</userinput>, then <userinput>/etc/init.d/inetd reload</userinput> to do so. Just in case your BOOTP server does not run Debian, the line in question should look like: <informalexample><screen>\n"
@@ -967,25 +943,25 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1328
+#: install-methods.xml:1308
 #, no-c-format
 msgid "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really easy, because it treats BOOTP clients as a moderately special case of DHCP clients. Some architectures require a complex configuration for booting clients via BOOTP. If yours is one of those, read the section <xref linkend=\"dhcpd\"/>. In that case, you will probably be able to get away with simply adding the <userinput>allow bootp</userinput> directive to the configuration block for the subnet containing the client, and restart <command>dhcpd</command> with <userinput>/etc/init.d/dhcpd3-server restart</userinput>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1349
+#: install-methods.xml:1329
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1350
+#: install-methods.xml:1330
 #, no-c-format
 msgid "One free software DHCP server is ISC <command>dhcpd</command>. For &debian;, the <classname>dhcp3-server</classname> package is recommended. Here is a sample configuration file for it (see <filename>/etc/dhcp3/dhcpd.conf</filename>):"
 msgstr ""
 
 #. Tag: screen
-#: install-methods.xml:1357
+#: install-methods.xml:1337
 #, no-c-format
 msgid ""
       "option domain-name \"example.com\";\n"
@@ -1010,25 +986,25 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1359
+#: install-methods.xml:1339
 #, no-c-format
 msgid "In this example, there is one server <replaceable>servername</replaceable> which performs all of the work of DHCP server, TFTP server, and network gateway. You will almost certainly need to change the domain-name options, as well as the server name and client hardware address. The <replaceable>filename</replaceable> option should be the name of the file which will be retrieved via TFTP."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1369
+#: install-methods.xml:1349
 #, no-c-format
 msgid "After you have edited the <command>dhcpd</command> configuration file, restart it with <userinput>/etc/init.d/dhcpd3-server restart</userinput>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1377
+#: install-methods.xml:1357
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1378
+#: install-methods.xml:1358
 #, no-c-format
 msgid ""
       "Here is another example for a <filename>dhcp.conf</filename> using the Pre-boot Execution Environment (PXE) method of TFTP. <informalexample><screen>\n"
@@ -1063,13 +1039,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1394
+#: install-methods.xml:1374
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1395
+#: install-methods.xml:1375
 #, no-c-format
 msgid ""
       "To get the TFTP server ready to go, you should first make sure that <command>tftpd</command> is enabled. This is usually enabled by having something like the following line in <filename>/etc/inetd.conf</filename>: <informalexample><screen>\n"
@@ -1078,19 +1054,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1407
+#: install-methods.xml:1387
 #, no-c-format
 msgid "Historically, TFTP servers used <filename>/tftpboot</filename> as directory to serve images from. However, &debian; packages may use other directories to comply with the <ulink url=\"&url-fhs-home;\">Filesystem Hierarchy Standard</ulink>. For example, <classname>tftpd-hpa</classname> by default uses <filename>/var/lib/tftpboot</filename>. You may have to adjust the configuration examples in this section accordingly."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1417
+#: install-methods.xml:1397
 #, no-c-format
 msgid "Look in <filename>/etc/inetd.conf</filename> and remember the directory which is used as the argument of <command>in.tftpd</command><footnote> <para> All <command>in.tftpd</command> alternatives available in Debian should log TFTP requests to the system logs by default. Some of them support a <userinput>-v</userinput> argument to increase verbosity. It is recommended to check these log messages in case of boot problems as they are a good starting point for diagnosing the cause of errors. </para> </footnote>; you'll need that below. If you've had to change <filename>/etc/inetd.conf</filename>, you'll have to notify the running <command>inetd</command> process that the file has changed. On a Debian machine, run <userinput>/etc/init.d/inetd reload</userinput>; on other machines, find out the process ID for <command>inetd</command>, and run <userinput>kill -HUP <replaceable>inetd-pid</replaceable></userinput>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1437
+#: install-methods.xml:1417
 #, no-c-format
 msgid ""
       "If you intend to install Debian on an SGI machine and your TFTP server is a GNU/Linux box running Linux 2.4, you'll need to set the following on your server: <informalexample><screen>\n"
@@ -1101,61 +1077,61 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1459
+#: install-methods.xml:1439
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1460
+#: install-methods.xml:1440
 #, no-c-format
 msgid "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-files\"/>, in the <command>tftpd</command> boot image directory. You may have to make a link from that file to the file which <command>tftpd</command> will use for booting a particular client. Unfortunately, the file name is determined by the TFTP client, and there are no strong standards."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1469
+#: install-methods.xml:1449
 #, no-c-format
 msgid "On NewWorld Power Macintosh machines, you will need to set up the <command>yaboot</command> boot loader as the TFTP boot image. <command>Yaboot</command> will then retrieve the kernel and RAMdisk images via TFTP itself. You will need to download the following files from the <filename>netboot/</filename> directory:"
 msgstr ""
 
 #. Tag: filename
-#: install-methods.xml:1500
+#: install-methods.xml:1480
 #, no-c-format
 msgid "boot.msg"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1505
+#: install-methods.xml:1485
 #, no-c-format
 msgid "For PXE booting, everything you should need is set up in the <filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this tarball into the <command>tftpd</command> boot image directory. Make sure your dhcp server is configured to pass <filename>pxelinux.0</filename> to <command>tftpd</command> as the filename to boot."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1513
+#: install-methods.xml:1493
 #, no-c-format
 msgid "For PXE booting, everything you should need is set up in the <filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this tarball into the <command>tftpd</command> boot image directory. Make sure your dhcp server is configured to pass <filename>/debian-installer/ia64/elilo.efi</filename> to <command>tftpd</command> as the filename to boot."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1525
+#: install-methods.xml:1505
 #, no-c-format
 msgid "Alpha TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1526
+#: install-methods.xml:1506
 #, no-c-format
 msgid "On Alpha, you must specify the filename (as a relative path to the boot image directory) using the <userinput>-file</userinput> argument to the SRM <userinput>boot</userinput> command, or by setting the <userinput>BOOT_FILE</userinput> environment variable. Alternatively, the filename can be given via BOOTP (in ISC <command>dhcpd</command>, use the <userinput>filename</userinput> directive). Unlike Open Firmware, there is <emphasis>no default filename</emphasis> on SRM, so you <emphasis>must</emphasis> specify a filename by either one of these methods."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1541
+#: install-methods.xml:1521
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1542
+#: install-methods.xml:1522
 #, no-c-format
 msgid ""
       "Some SPARC architectures add the subarchitecture names, such as <quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if your system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename would be <filename>C0A80103.SUN4C</filename>. However, there are also subarchitectures where the file the client looks for is just <filename>client-ip-in-hex</filename>. An easy way to determine the hexadecimal code for the IP address is to enter the following command in a shell (assuming the machine's intended IP is 10.0.0.4). <informalexample><screen>\n"
@@ -1164,85 +1140,85 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1558
+#: install-methods.xml:1538
 #, no-c-format
 msgid "If you've done all this correctly, giving the command <userinput>boot net</userinput> from the OpenPROM should load the image. If the image cannot be found, try checking the logs on your tftp server to see which image name is being requested."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1565
+#: install-methods.xml:1545
 #, no-c-format
 msgid "You can also force some sparc systems to look for a specific file name by adding it to the end of the OpenPROM boot command, such as <userinput>boot net my-sparc.image</userinput>. This must still reside in the directory that the TFTP server looks in."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1576
+#: install-methods.xml:1556
 #, no-c-format
 msgid "BVM/Motorola TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1577
+#: install-methods.xml:1557
 #, no-c-format
 msgid "For BVM and Motorola VMEbus systems copy the files &bvme6000-tftp-files; to <filename>/tftpboot/</filename>."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1582
+#: install-methods.xml:1562
 #, no-c-format
 msgid "Next, configure your boot ROMs or BOOTP server to initially load the <filename>tftplilo.bvme</filename> or <filename>tftplilo.mvme</filename> files from the TFTP server. Refer to the <filename>tftplilo.txt</filename> file for your subarchitecture for additional system-specific configuration information."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1594
+#: install-methods.xml:1574
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1595
+#: install-methods.xml:1575
 #, no-c-format
 msgid "On SGI machines you can rely on the <command>bootpd</command> to supply the name of the TFTP file. It is given either as the <userinput>bf=</userinput> in <filename>/etc/bootptab</filename> or as the <userinput>filename=</userinput> option in <filename>/etc/dhcpd.conf</filename>."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1607
+#: install-methods.xml:1587
 #, no-c-format
 msgid "Broadcom BCM91250A and BCM91480B TFTP Booting"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1608
+#: install-methods.xml:1588
 #, no-c-format
 msgid "You don't have to configure DHCP in a special way because you'll pass the full path of the file to be loaded to CFE."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1713
+#: install-methods.xml:1693
 #, no-c-format
 msgid "Automatic Installation"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1714
+#: install-methods.xml:1694
 #, no-c-format
 msgid "For installing on multiple computers it's possible to do fully automatic installations. Debian packages intended for this include <classname>fai</classname> (which uses an install server), <classname>replicator</classname>, <classname>systemimager</classname>, <classname>autoinstall</classname>, and the Debian Installer itself."
 msgstr ""
 
 #. Tag: title
-#: install-methods.xml:1727
+#: install-methods.xml:1707
 #, no-c-format
 msgid "Automatic Installation Using the Debian Installer"
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1728
+#: install-methods.xml:1708
 #, no-c-format
 msgid "The Debian Installer supports automating installs via preconfiguration files. A preconfiguration file can be loaded from the network or from removable media, and used to fill in answers to questions asked during the installation process."
 msgstr ""
 
 #. Tag: para
-#: install-methods.xml:1735
+#: install-methods.xml:1715
 #, no-c-format
 msgid "Full documentation on preseeding including a working example that you can edit is in <xref linkend=\"appendix-preseed\"/>."
 msgstr ""