Remove Polish translation as there has been zero work done on it since po files were created in 2005/12

1 files changed, 0 insertions, 602 deletions

diff --git a/po/pl/post-install.po b/po/pl/post-install.po
deleted file mode 100644
index 4b26c1cd7..000000000
--- a/po/pl/post-install.po
+++ /dev/null
@@ -1,602 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
-"POT-Creation-Date: 2006-01-31 23:11+0000\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: application/x-xml2pot; charset=UTF-8\n"
-"Content-Transfer-Encoding: ENCODING\n"
-
-#. Tag: title
-#: post-install.xml:5
-#, no-c-format
-msgid "Next Steps and Where to Go From Here"
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:13
-#, no-c-format
-msgid "If You Are New to Unix"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:14
-#, no-c-format
-msgid ""
-"If you are new to Unix, you probably should go out and buy some books and do "
-"some reading. A lot of valuable information can also be found in the <ulink "
-"url=\"&url-debian-reference;\">Debian Reference</ulink>. This <ulink url="
-"\"&url-unix-faq;\">list of Unix FAQs</ulink> contains a number of UseNet "
-"documents which provide a nice historical reference."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:22
-#, no-c-format
-msgid ""
-"Linux is an implementation of Unix. The <ulink url=\"&url-ldp;\">Linux "
-"Documentation Project (LDP)</ulink> collects a number of HOWTOs and online "
-"books relating to Linux. Most of these documents can be installed locally; "
-"just install the <classname>doc-linux-html</classname> package (HTML "
-"versions) or the <classname>doc-linux-text</classname> package (ASCII "
-"versions), then look in <filename>/usr/share/doc/HOWTO</filename>. "
-"International versions of the LDP HOWTOs are also available as Debian "
-"packages."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:43
-#, no-c-format
-msgid "Orienting Yourself to Debian"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:44
-#, no-c-format
-msgid ""
-"Debian is a little different from other distributions. Even if you're "
-"familiar with Linux in other distributions, there are things you should know "
-"about Debian to help you to keep your system in a good, clean state. This "
-"chapter contains material to help you get oriented; it is not intended to be "
-"a tutorial for how to use Debian, but just a very brief glimpse of the "
-"system for the very rushed."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:55
-#, no-c-format
-msgid "Debian Packaging System"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:56
-#, no-c-format
-msgid ""
-"The most important concept to grasp is the Debian packaging system. In "
-"essence, large parts of your system should be considered under the control "
-"of the packaging system. These include: <itemizedlist> <listitem><para> "
-"<filename>/usr</filename> (excluding <filename>/usr/local</filename>) </"
-"para></listitem> <listitem><para> <filename>/var</filename> (you could make "
-"<filename>/var/local</filename> and be safe in there) </para></listitem> "
-"<listitem><para> <filename>/bin</filename> </para></listitem> "
-"<listitem><para> <filename>/sbin</filename> </para></listitem> "
-"<listitem><para> <filename>/lib</filename> </para></listitem> </"
-"itemizedlist> For instance, if you replace <filename>/usr/bin/perl</"
-"filename>, that will work, but then if you upgrade your <classname>perl</"
-"classname> package, the file you put there will be replaced. Experts can get "
-"around this by putting packages on <quote>hold</quote> in <command>aptitude</"
-"command>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:97
-#, no-c-format
-msgid ""
-"One of the best installation methods is apt. You can use the command line "
-"version <command>apt-get</command> or full-screen text version "
-"<application>aptitude</application>. Note apt will also let you merge main, "
-"contrib, and non-free so you can have export-restricted packages as well as "
-"standard versions."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:108
-#, no-c-format
-msgid "Application Version Management"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:109
-#, no-c-format
-msgid ""
-"Alternative versions of applications are managed by update-alternatives. If "
-"you are maintaining multiple versions of your applications, read the update-"
-"alternatives man page."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:119
-#, no-c-format
-msgid "Cron Job Management"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:120
-#, no-c-format
-msgid ""
-"Any jobs under the purview of the system administrator should be in "
-"<filename>/etc</filename>, since they are configuration files. If you have a "
-"root cron job for daily, weekly, or monthly runs, put them in <filename>/etc/"
-"cron.{daily,weekly,monthly}</filename>. These are invoked from <filename>/"
-"etc/crontab</filename>, and will run in alphabetic order, which serializes "
-"them."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:129
-#, no-c-format
-msgid ""
-"On the other hand, if you have a cron job that (a) needs to run as a special "
-"user, or (b) needs to run at a special time or frequency, you can use either "
-"<filename>/etc/crontab</filename>, or, better yet, <filename>/etc/cron.d/"
-"whatever</filename>. These particular files also have an extra field that "
-"allows you to stipulate the user under which the cron job runs."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:138
-#, no-c-format
-msgid ""
-"In either case, you just edit the files and cron will notice them "
-"automatically. There is no need to run a special command. For more "
-"information see cron(8), crontab(5), and <filename>/usr/share/doc/cron/"
-"README.Debian</filename>."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:155
-#, no-c-format
-msgid "Reactivating DOS and Windows"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:156
-#, no-c-format
-msgid ""
-"After installing the base system and writing to the <emphasis>Master Boot "
-"Record</emphasis>, you will be able to boot Linux, but probably nothing "
-"else. This depends what you have chosen during the installation. This "
-"chapter will describe how you can reactivate your old systems so that you "
-"can also boot your DOS or Windows again."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:164
-#, no-c-format
-msgid ""
-"<command>LILO</command> is a boot manager with which you can also boot other "
-"operating systems than Linux, which complies to PC conventions. The boot "
-"manager is configured via <filename>/etc/lilo.conf</filename> file. Whenever "
-"you edited this file you have to run <command>lilo</command> afterwards. The "
-"reason for this is that the changes will take place only when you call the "
-"program."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:174
-#, no-c-format
-msgid ""
-"Important parts of the <filename>lilo.conf</filename> file are the lines "
-"containing the <userinput>image</userinput> and <userinput>other</userinput> "
-"keywords, as well as the lines following those. They can be used to describe "
-"a system which can be booted by <command>LILO</command>. Such a system can "
-"include a kernel (<userinput>image</userinput>), a root partition, "
-"additional kernel parameters, etc. as well as a configuration to boot "
-"another, non-Linux (<userinput>other</userinput>) operating system. These "
-"keywords can also be used more than once. The ordering of these systems "
-"within the configuration file is important because it determines which "
-"system will be booted automatically after, for instance, a timeout "
-"(<userinput>delay</userinput>) presuming <command>LILO</command> wasn't "
-"stopped by pressing the <keycap>shift</keycap> key."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:190
-#, no-c-format
-msgid ""
-"After a fresh install of Debian, just the current system is configured for "
-"booting with <command>LILO</command>. If you want to boot another Linux "
-"kernel, you have to edit the configuration file <filename>/etc/lilo.conf</"
-"filename> to add the following lines: <informalexample><screen>\n"
-"&additional-lilo-image;\n"
-"</screen></informalexample> For a basic setup just the first two lines are "
-"necessary. If you want to know more about the other two options please have "
-"a look at the <command>LILO</command> documentation. This can be found in "
-"<filename>/usr/share/doc/lilo/</filename>. The file which should be read is "
-"<filename>Manual.txt</filename>. To have a quicker start into the world of "
-"booting a system you can also look at the <command>LILO</command> man pages "
-"<filename>lilo.conf</filename> for an overview of configuration keywords and "
-"<filename>lilo</filename> for description of the installation of the new "
-"configuration into the boot sector."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:210
-#, no-c-format
-msgid ""
-"Notice that there are other boot loaders available in &debian;, such as GRUB "
-"(in <classname>grub</classname> package), CHOS (in <classname>chos</"
-"classname> package), Extended-IPL (in <classname>extipl</classname> "
-"package), loadlin (in <classname>loadlin</classname> package) etc."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:225
-#, no-c-format
-msgid "Further Reading and Information"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:226
-#, no-c-format
-msgid ""
-"If you need information about a particular program, you should first try "
-"<userinput>man <replaceable>program</replaceable></userinput>, or "
-"<userinput>info <replaceable>program</replaceable></userinput>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:232
-#, no-c-format
-msgid ""
-"There is lots of useful documentation in <filename>/usr/share/doc</filename> "
-"as well. In particular, <filename>/usr/share/doc/HOWTO</filename> and "
-"<filename>/usr/share/doc/FAQ</filename> contain lots of interesting "
-"information. To submit bugs, look at <filename>/usr/share/doc/debian/bug*</"
-"filename>. To read about Debian-specific issues for particular programs, "
-"look at <filename>/usr/share/doc/(package name)/README.Debian</filename>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:243
-#, no-c-format
-msgid ""
-"The <ulink url=\"http://www.debian.org/\">Debian web site</ulink> contains a "
-"large quantity of documentation about Debian. In particular, see the <ulink "
-"url=\"http://www.debian.org/doc/FAQ/\">Debian GNU/Linux FAQ</ulink> and the "
-"<ulink url=\"http://www.debian.org/doc/user-manuals#quick-reference\">Debian "
-"Reference</ulink>. An index of more Debian documentation is available from "
-"the <ulink url=\"http://www.debian.org/doc/ddp\">Debian Documentation "
-"Project</ulink>. The Debian community is self-supporting; to subscribe to "
-"one or more of the Debian mailing lists, see the <ulink url=\"http://www."
-"debian.org/MailingLists/subscribe\"> Mail List Subscription</ulink> page. "
-"Last, but not least, the <ulink url=\"http://lists.debian.org/\">Debian "
-"Mailing List Archives</ulink> contain a wealth of information on Debian."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:261
-#, no-c-format
-msgid ""
-"A general source of information on GNU/Linux is the <ulink url=\"http://www."
-"tldp.org/\">Linux Documentation Project</ulink>. There you will find the "
-"HOWTOs and pointers to other very valuable information on parts of a GNU/"
-"Linux system."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:276
-#, no-c-format
-msgid "Compiling a New Kernel"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:277
-#, no-c-format
-msgid ""
-"Why would someone want to compile a new kernel? It is often not necessary "
-"since the default kernel shipped with Debian handles most configurations. "
-"Also, Debian often offers several alternative kernels. So you may want to "
-"check first if there is an alternative kernel image package that better "
-"corresponds to your hardware. However, it can be useful to compile a new "
-"kernel in order to:"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:287
-#, no-c-format
-msgid ""
-"handle special hardware needs, or hardware conflicts with the pre-supplied "
-"kernels"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:293
-#, no-c-format
-msgid ""
-"use options of the kernel which are not supported in the pre-supplied "
-"kernels (such as high memory support)"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:299
-#, no-c-format
-msgid "optimize the kernel by removing useless drivers to speed up boot time"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:304
-#, no-c-format
-msgid "create a monolithic instead of a modularized kernel"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:309
-#, no-c-format
-msgid "run an updated or development kernel"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:314
-#, no-c-format
-msgid "learn more about linux kernels"
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:323
-#, no-c-format
-msgid "Kernel Image Management"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:324
-#, no-c-format
-msgid "Don't be afraid to try compiling the kernel. It's fun and profitable."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:328
-#, no-c-format
-msgid ""
-"To compile a kernel the Debian way, you need some packages: "
-"<classname>fakeroot</classname>, <classname>kernel-package</classname>, "
-"<phrase condition=\"classic-kpkg\"><classname>kernel-source-&kernelversion;</"
-"classname> (the most recent version at the time of this writing)</phrase> "
-"<phrase condition=\"common-kpkg\"><classname>linux-source-2.6</classname></"
-"phrase> and a few others which are probably already installed (see "
-"<filename>/usr/share/doc/kernel-package/README.gz</filename> for the "
-"complete list)."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:339
-#, no-c-format
-msgid ""
-"This method will make a .deb of your kernel source, and, if you have non-"
-"standard modules, make a synchronized dependent .deb of those too. It's a "
-"better way to manage kernel images; <filename>/boot</filename> will hold the "
-"kernel, the System.map, and a log of the active config file for the build."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:347
-#, no-c-format
-msgid ""
-"Note that you don't <emphasis>have</emphasis> to compile your kernel the "
-"<quote>Debian way</quote>; but we find that using the packaging system to "
-"manage your kernel is actually safer and easier. In fact, you can get your "
-"kernel sources right from Linus instead of <phrase condition=\"classic-kpkg"
-"\"><classname>kernel-source-&kernelversion;</classname>,</phrase> <phrase "
-"condition=\"common-kpkg\"><classname>linux-source-2.6</classname>,</phrase> "
-"yet still use the <classname>kernel-package</classname> compilation method."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:357
-#, no-c-format
-msgid ""
-"Note that you'll find complete documentation on using <classname>kernel-"
-"package</classname> under <filename>/usr/share/doc/kernel-package</"
-"filename>. This section just contains a brief tutorial."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:364
-#, no-c-format
-msgid ""
-"Hereafter, we'll assume you have free rein over your machine and will "
-"extract your kernel source to somewhere in your home directory<footnote> "
-"<para> There are other locations where you can extract kernel sources and "
-"build your custom kernel, but this is easiest as it does not require special "
-"permissions. </para> </footnote>. We'll also assume that your kernel version "
-"is &kernelversion;. Make sure you are in the directory to where you want to "
-"unpack the kernel sources, extract them using <phrase condition=\"classic-"
-"kpkg\"><userinput>tar xjf /usr/src/kernel-source-&kernelversion;.tar.bz2</"
-"userinput></phrase> <phrase condition=\"common-kpkg\"><userinput>tar xjf /"
-"usr/src/linux-source-&kernelversion;.tar.bz2</userinput></phrase> and change "
-"to the directory <phrase condition=\"classic-kpkg\"><filename>kernel-source-"
-"&kernelversion;</filename></phrase> <phrase condition=\"common-kpkg"
-"\"><filename>linux-source-&kernelversion;</filename></phrase> that will have "
-"been created."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:389
-#, no-c-format
-msgid ""
-"Now, you can configure your kernel. Run <userinput>make xconfig</userinput> "
-"if X11 is installed, configured and being run; run <userinput>make "
-"menuconfig</userinput> otherwise (you'll need <classname>libncurses5-dev</"
-"classname> installed). Take the time to read the online help and choose "
-"carefully. When in doubt, it is typically better to include the device "
-"driver (the software which manages hardware peripherals, such as Ethernet "
-"cards, SCSI controllers, and so on) you are unsure about. Be careful: other "
-"options, not related to a specific hardware, should be left at the default "
-"value if you do not understand them. Do not forget to select <quote>Kernel "
-"module loader</quote> in <quote>Loadable module support</quote> (it is not "
-"selected by default). If not included, your Debian installation will "
-"experience problems."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:404
-#, no-c-format
-msgid ""
-"Clean the source tree and reset the <classname>kernel-package</classname> "
-"parameters. To do that, do <userinput>make-kpkg clean</userinput>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:409
-#, no-c-format
-msgid ""
-"Now, compile the kernel: <userinput>fakeroot make-kpkg --revision=custom.1.0 "
-"kernel_image</userinput>. The version number of <quote>1.0</quote> can be "
-"changed at will; this is just a version number that you will use to track "
-"your kernel builds. Likewise, you can put any word you like in place of "
-"<quote>custom</quote> (e.g., a host name). Kernel compilation may take quite "
-"a while, depending on the power of your machine."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:419
-#, no-c-format
-msgid ""
-"If you require PCMCIA support, you'll also need to install the "
-"<classname>pcmcia-source</classname> package. Unpack the gzipped tar file as "
-"root in the directory <filename>/usr/src</filename> (it's important that "
-"modules are found where they are expected to be found, namely, <filename>/"
-"usr/src/modules</filename>). Then, as root, do <userinput>make-kpkg "
-"modules_image</userinput>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:428
-#, no-c-format
-msgid ""
-"Once the compilation is complete, you can install your custom kernel like "
-"any package. As root, do <userinput>dpkg -i ../kernel-image-&kernelversion;-"
-"<replaceable>subarchitecture</replaceable>_custom.1.0_&architecture;.deb</"
-"userinput>. The <replaceable>subarchitecture</replaceable> part is an "
-"optional sub-architecture, <phrase arch=\"i386\"> such as <quote>i586</"
-"quote>, </phrase> depending on what kernel options you set. <userinput>dpkg -"
-"i kernel-image...</userinput> will install the kernel, along with some other "
-"nice supporting files. For instance, the <filename>System.map</filename> "
-"will be properly installed (helpful for debugging kernel problems), and "
-"<filename>/boot/config-&kernelversion;</filename> will be installed, "
-"containing your current configuration set. Your new <classname>kernel-image-"
-"&kernelversion;</classname> package is also clever enough to automatically "
-"use your platform's boot-loader to run an update on the booting, allowing "
-"you to boot without re-running the boot loader. If you have created a "
-"modules package, e.g., if you have PCMCIA, you'll need to install that "
-"package as well."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:449
-#, no-c-format
-msgid ""
-"It is time to reboot the system: read carefully any warning that the above "
-"step may have produced, then <userinput>shutdown -r now</userinput>."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:454
-#, no-c-format
-msgid ""
-"For more information on Debian kernels and kernel compilation, see the "
-"<ulink url=\"&url-kernel-handbook;\">Debian Linux Kernel Handbook</ulink>. "
-"For more information on <classname>kernel-package</classname>, read the fine "
-"documentation in <filename>/usr/share/doc/kernel-package</filename>."
-msgstr ""
-
-#. Tag: title
-#: post-install.xml:470
-#, no-c-format
-msgid "Recovering a Broken System"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:471
-#, no-c-format
-msgid ""
-"Sometimes, things go wrong, and the system you've carefully installed is no "
-"longer bootable. Perhaps the boot loader configuration broke while trying "
-"out a change, or perhaps a new kernel you installed won't boot, or perhaps "
-"cosmic rays hit your disk and flipped a bit in <filename>/sbin/init</"
-"filename>. Regardless of the cause, you'll need to have a system to work "
-"from while you fix it, and rescue mode can be useful for this."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:481
-#, no-c-format
-msgid ""
-"To access rescue mode, type <userinput>rescue</userinput> at the "
-"<prompt>boot:</prompt> prompt, or boot with the <userinput>rescue/"
-"enable=true</userinput> boot parameter. You'll be shown the first few "
-"screens of the installer, with a note in the corner of the display to "
-"indicate that this is rescue mode, not a full installation. Don't worry, "
-"your system is not about to be overwritten! Rescue mode simply takes "
-"advantage of the hardware detection facilities available in the installer to "
-"ensure that your disks, network devices, and so on are available to you "
-"while repairing your system."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:496
-#, no-c-format
-msgid ""
-"Instead of the partitioning tool, you should now be presented with a list of "
-"the partitions on your system, and asked to select one of them. Normally, "
-"you should select the partition containing the root file system that you "
-"need to repair. You may select partitions on RAID and LVM devices as well as "
-"those created directly on disks."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:504
-#, no-c-format
-msgid ""
-"If possible, the installer will now present you with a shell prompt in the "
-"file system you selected, which you can use to perform any necessary "
-"repairs. <phrase arch=\"i386\"> For example, if you need to reinstall the "
-"GRUB boot loader into the master boot record of the first hard disk, you "
-"could enter the command <userinput>grub-install '(hd0)'</userinput> to do "
-"so. </phrase>"
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:516
-#, no-c-format
-msgid ""
-"If the installer cannot run a usable shell in the root file system you "
-"selected, perhaps because the file system is corrupt, then it will issue a "
-"warning and offer to give you a shell in the installer environment instead. "
-"You may not have as many tools available in this environment, but they will "
-"often be enough to repair your system anyway. The root file system you "
-"selected will be mounted on the <filename>/target</filename> directory."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:525
-#, no-c-format
-msgid "In either case, after you exit the shell, the system will reboot."
-msgstr ""
-
-#. Tag: para
-#: post-install.xml:529
-#, no-c-format
-msgid ""
-"Finally, note that repairing broken systems can be difficult, and this "
-"manual does not attempt to go into all the things that might have gone wrong "
-"or how to fix them. If you have problems, consult an expert."
-msgstr ""