[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 0 insertions, 63 deletions

diff --git a/po/nl/install-methods.po b/po/nl/install-methods.po
index 8d66dd1b1..55865f883 100644
--- a/po/nl/install-methods.po
+++ b/po/nl/install-methods.po
@@ -1466,37 +1466,6 @@ msgstr ""
 #. Tag: para
 #: install-methods.xml:989
 #, no-c-format
-#| msgid ""
-#| "To use CMU <command>bootpd</command>, you must first uncomment (or add) "
-#| "the relevant line in <filename>/etc/inetd.conf</filename>. On &debian-"
-#| "gnu;, you can run <userinput>update-inetd --enable bootps</userinput>, "
-#| "then <userinput>/etc/init.d/inetd reload</userinput> to do so. Just in "
-#| "case your BOOTP server does not run &debian;, the line in question should "
-#| "look like: <informalexample><screen>\n"
-#| "bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
-#| "</screen></informalexample> Now, you must create an <filename>/etc/"
-#| "bootptab</filename> file. This has the same sort of familiar and cryptic "
-#| "format as the good old BSD <filename>printcap</filename>, "
-#| "<filename>termcap</filename>, and <filename>disktab</filename> files. See "
-#| "the <filename>bootptab</filename> manual page for more information. For "
-#| "CMU <command>bootpd</command>, you will need to know the hardware (MAC) "
-#| "address of the client. Here is an example <filename>/etc/bootptab</"
-#| "filename>: <informalexample><screen>\n"
-#| "client:\\\n"
-#| "  hd=/tftpboot:\\\n"
-#| "  bf=tftpboot.img:\\\n"
-#| "  ip=192.168.1.90:\\\n"
-#| "  sm=255.255.255.0:\\\n"
-#| "  sa=192.168.1.1:\\\n"
-#| "  ha=0123456789AB:\n"
-#| "</screen></informalexample> You will need to change at least the "
-#| "<quote>ha</quote> option, which specifies the hardware address of the "
-#| "client. The <quote>bf</quote> option specifies the file a client should "
-#| "retrieve via TFTP; see <xref linkend=\"tftp-images\"/> for more details. "
-#| "<phrase arch=\"mips\"> On SGI machines you can just enter the command "
-#| "monitor and type <userinput>printenv</userinput>. The value of the "
-#| "<userinput>eaddr</userinput> variable is the machine's MAC address. </"
-#| "phrase>"
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
 "relevant line in <filename>/etc/inetd.conf</filename>. On &debian-gnu;, you "
@@ -1852,7 +1821,6 @@ msgstr ""
 "halfautomatisch uit te voeren), alsook instructies voor het verifiëren van "
 "de integriteit van de hierboven vermelde controlegetalbestanden zelf."
 
-#, no-c-format
 #~ msgid ""
 #~ "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
 #~ "<command>mac-fdisk</command>'s <userinput>C</userinput> command and "
@@ -1862,15 +1830,12 @@ msgstr ""
 #~ "met het commando <userinput>C</userinput> van <command>mac-fdisk</"
 #~ "command> en pak het image er rechtstreeks naar uit:"
 
-#, no-c-format
 #~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 #~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 
-#, no-c-format
 #~ msgid "Partitioning the USB stick"
 #~ msgstr "De USB-stick indelen in partities"
 
-#, no-c-format
 #~ msgid ""
 #~ "Most USB sticks do not come pre-configured in such a way that Open "
 #~ "Firmware can boot from them, so you will need to repartition the stick. "
@@ -1899,7 +1864,6 @@ msgstr ""
 #~ "gebruiken voor uw USB-stick. Het commando <command>hformat</command> "
 #~ "vindt u in het &debian; pakket <classname>hfsutils</classname>."
 
-#, no-c-format
 #~ msgid ""
 #~ "In order to start the kernel after booting from the USB stick, we will "
 #~ "put a boot loader on the stick. The <command>yaboot</command> boot loader "
@@ -1915,7 +1879,6 @@ msgstr ""
 #~ "besturingssysteem met ondersteuning voor het HFS-bestandssysteem kan "
 #~ "gebruikt worden om de configuratie van de bootloader aan te passen."
 
-#, no-c-format
 #~ msgid ""
 #~ "The normal <command>ybin</command> tool that comes with <command>yaboot</"
 #~ "command> does not yet understand USB storage devices, so you will have to "
@@ -1951,11 +1914,9 @@ msgstr ""
 #~ "u de rest van de voorbereiding van de USB-stick uitvoeren met behulp van "
 #~ "de normale Unix-hulpprogramma's."
 
-#, no-c-format
 #~ msgid "Adding the installer image"
 #~ msgstr "Het image van het installatiesysteem toevoegen"
 
-#, no-c-format
 #~ msgid ""
 #~ "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
 #~ "replaceable> /mnt</userinput>) and copy the following installer image "
@@ -1965,23 +1926,18 @@ msgstr ""
 #~ "replaceable> /mnt</userinput>) en kopieer de volgende image-bestanden van "
 #~ "het installatiesysteem naar de stick:"
 
-#, no-c-format
 #~ msgid "<filename>vmlinux</filename> (kernel binary)"
 #~ msgstr "<filename>vmlinux</filename> (binair kernel-bestand)"
 
-#, no-c-format
 #~ msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 #~ msgstr "<filename>initrd.gz</filename> (initieel ramschijf-image)"
 
-#, no-c-format
 #~ msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 #~ msgstr "<filename>yaboot.conf</filename> (configuratiebestand voor yaboot)"
 
-#, no-c-format
 #~ msgid "<filename>boot.msg</filename> (optional boot message)"
 #~ msgstr "<filename>boot.msg</filename> (facultatieve opstartmelding)"
 
-#, no-c-format
 #~ msgid ""
 #~ "The <filename>yaboot.conf</filename> configuration file should contain "
 #~ "the following lines: <informalexample><screen>\n"
@@ -2015,7 +1971,6 @@ msgstr ""
 #~ "het image dat u zult opstarten, de parameter <userinput>initrd-size</"
 #~ "userinput> moet verhoogd worden."
 
-#, no-c-format
 #~ msgid ""
 #~ "If you used an <filename>hd-media</filename> image, you should now copy "
 #~ "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
@@ -2034,7 +1989,6 @@ msgstr ""
 #~ "Koppel de USB geheugenstick af wanneer u klaar bent (<userinput>umount /"
 #~ "mnt</userinput>)."
 
-#, no-c-format
 #~ msgid ""
 #~ "The installer cannot boot from files on an HFS+ file system. MacOS System "
 #~ "8.1 and above may use HFS+ file systems; NewWorld PowerMacs all use HFS+. "
@@ -2056,7 +2010,6 @@ msgstr ""
 #~ "bestanden te kunnen uitwisselen tussen MacOS en Linux, in het bijzonder "
 #~ "de installatiebestanden die u downloadt."
 
-#, no-c-format
 #~ msgid ""
 #~ "Different programs are used for hard disk installation system booting, "
 #~ "depending on whether the system is a <quote>NewWorld</quote> or an "
@@ -2067,7 +2020,6 @@ msgstr ""
 #~ "feit of het systeem een <quote>NewWorld</quote> of een <quote>OldWorld</"
 #~ "quote> model is."
 
-#, no-c-format
 #~ msgid ""
 #~ "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
 #~ "idea to use DHCP instead of BOOTP. Some of the latest machines are unable "
@@ -2077,7 +2029,6 @@ msgstr ""
 #~ "over een NewWorld Power Macintosh machine beschikt. Sommige van de meest "
 #~ "recente machines kunnen niet opstarten met behulp van BOOTP."
 
-#, no-c-format
 #~ msgid ""
 #~ "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. "
 #~ "There is an <classname>rbootd</classname> package available in &debian;."
@@ -2086,7 +2037,6 @@ msgstr ""
 #~ "van BOOTP. In &debian; kunt u een <classname>rbootd</classname> pakket "
 #~ "vinden."
 
-#, no-c-format
 #~ msgid ""
 #~ "If you intend to install &debian; on an SGI machine and your TFTP server "
 #~ "is a GNU/Linux box running Linux 2.4, you'll need to set the following on "
@@ -2118,7 +2068,6 @@ msgstr ""
 #~ "# echo \"2048 32767\" &gt; /proc/sys/net/ipv4/ip_local_port_range\n"
 #~ "</screen></informalexample>"
 
-#, no-c-format
 #~ msgid ""
 #~ "On NewWorld Power Macintosh machines, you will need to set up the "
 #~ "<command>yaboot</command> boot loader as the TFTP boot image. "
@@ -2132,27 +2081,21 @@ msgstr ""
 #~ "schijf ophalen via TFTP. U zult de volgende bestanden moeten downloaden "
 #~ "van de map <filename>netboot/</filename>:"
 
-#, no-c-format
 #~ msgid "vmlinux"
 #~ msgstr "vmlinux"
 
-#, no-c-format
 #~ msgid "initrd.gz"
 #~ msgstr "initrd.gz"
 
-#, no-c-format
 #~ msgid "yaboot"
 #~ msgstr "yaboot"
 
-#, no-c-format
 #~ msgid "yaboot.conf"
 #~ msgstr "yaboot.conf"
 
-#, no-c-format
 #~ msgid "boot.msg"
 #~ msgstr "boot.msg"
 
-#, no-c-format
 #~ msgid ""
 #~ "For PXE booting, everything you should need is set up in the "
 #~ "<filename>netboot/netboot.tar.gz</filename> tarball. Simply extract this "
@@ -2167,11 +2110,9 @@ msgstr ""
 #~ "<filename>/debian-installer/ia64/elilo.efi</filename> door te geven aan "
 #~ "<command>tftpd</command> als de naam van het opstartbestand."
 
-#, no-c-format
 #~ msgid "SPARC TFTP Booting"
 #~ msgstr "Opstarten via TFTP met SPARC"
 
-#, no-c-format
 #~ msgid ""
 #~ "Some SPARC architectures add the subarchitecture names, such as "
 #~ "<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if "
@@ -2202,7 +2143,6 @@ msgstr ""
 #~ "u alle letters naar hoofdletters moeten omzetten en zo nodig de naam van "
 #~ "de subarchitectuur toevoegen."
 
-#, no-c-format
 #~ msgid ""
 #~ "If you've done all this correctly, giving the command <userinput>boot "
 #~ "net</userinput> from the OpenPROM should load the image. If the image "
@@ -2215,7 +2155,6 @@ msgstr ""
 #~ "dan op de tftp-server de logbestanden te controleren om na te gaan naar "
 #~ "welke imagenaam gevraagd wordt."
 
-#, no-c-format
 #~ msgid ""
 #~ "You can also force some sparc systems to look for a specific file name by "
 #~ "adding it to the end of the OpenPROM boot command, such as "
@@ -2228,11 +2167,9 @@ msgstr ""
 #~ "Dat moet zich nog steeds in de map bevinden waarin de TFTP-server gaat "
 #~ "kijken."
 
-#, no-c-format
 #~ msgid "SGI TFTP Booting"
 #~ msgstr "Opstarten via TFTP met SGI"
 
-#, no-c-format
 #~ msgid ""
 #~ "On SGI machines you can rely on the <command>bootpd</command> to supply "
 #~ "the name of the TFTP file. It is given either as the <userinput>bf=</"