Update of POT and PO files for the manual

1 files changed, 239 insertions, 227 deletions

diff --git a/po/ko/install-methods.po b/po/ko/install-methods.po
index d36c53545..2da5a130d 100644
--- a/po/ko/install-methods.po
+++ b/po/ko/install-methods.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: install-methods.xml\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2006-03-19 13:45+0000\n"
+"POT-Creation-Date: 2006-04-30 23:58+0000\n"
 "PO-Revision-Date: 2005-12-20 03:44+0900\n"
 "Last-Translator: Changwoo Ryu <cwryu@debian.org>\n"
 "Language-Team: Korean <debian-l10n-korean@lists.debian.org>\n"
@@ -252,8 +252,8 @@ msgid ""
 "The easiest way to boot a Netwinder is over the network, using the supplied "
 "TFTP image &netwinder-boot-img;."
 msgstr ""
-"NetWinder를 부팅하는 가장 쉬운 방법은, 제공된 &netwinder-boot-img; TFTP 이미지를 이"
-"용해 네트워크에서 부팅하는 것입니다."
+"NetWinder를 부팅하는 가장 쉬운 방법은, 제공된 &netwinder-boot-img; TFTP 이미"
+"지를 이용해 네트워크에서 부팅하는 것입니다."
 
 #. Tag: title
 #: install-methods.xml:175
@@ -268,8 +268,8 @@ msgid ""
 "CATS can be booted either via the network or from CD-ROM. The kernel and "
 "initrd can be obtained from &cats-boot-img;."
 msgstr ""
-"CATS는 네트워크나 CD-ROM을 이용해서 부팅할 수 있습니다. 커널과 initrd이미지는 &cats-boot-"
-"img;에서 구할 수 있습니다."
+"CATS는 네트워크나 CD-ROM을 이용해서 부팅할 수 있습니다. 커널과 initrd이미지"
+"는 &cats-boot-img;에서 구할 수 있습니다."
 
 #. Tag: title
 #: install-methods.xml:185
@@ -285,8 +285,9 @@ msgid ""
 "boot <classname>debian-installer</classname>. This firmware image can be "
 "obtained from &nslu2-firmware-img;."
 msgstr ""
-"Linksys2 NSLU2에 있는 펌웨어 이미지는 자동으로 <classname>debian-installer</classname>"
-"를 부팅합니다. 이 펌웨어 이미지는 &nslu2-firmware-img;에서 구할 수 있습니다."
+"Linksys2 NSLU2에 있는 펌웨어 이미지는 자동으로 <classname>debian-installer</"
+"classname>를 부팅합니다. 이 펌웨어 이미지는 &nslu2-firmware-img;에서 구할 수 "
+"있습니다."
 
 #. Tag: title
 #: install-methods.xml:232
@@ -327,7 +328,7 @@ msgstr "IPL 테이프 만들기"
 
 #. Tag: para
 #: install-methods.xml:263
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "If you can't boot (IPL) from the CD-ROM and you are not using VM you need to "
 "create an IPL tape first. This is described in section 3.4.3 in the <ulink "
@@ -336,7 +337,7 @@ msgid ""
 "you need to write to the tape are (in this order): <filename>kernel.debian</"
 "filename>, <filename>parmfile.debian</filename> and <filename>initrd.debian</"
 "filename>. The files can be downloaded from the <filename>tape</filename> "
-"sub-directory, see <xref linkend=\"where-files\"/>,"
+"sub-directory, see <xref linkend=\"where-files\"/>."
 msgstr ""
 "CD-ROM에서 부팅할 수 없고 (IPL) VM을 사용하는 게 아니라면 먼저 IPL 테이프를 "
 "만들어야 합니다. <ulink url=\"http://www.redbooks.ibm.com/pubs/pdfs/redbooks/"
@@ -365,19 +366,24 @@ msgstr ""
 
 #. Tag: para
 #: install-methods.xml:293
-#, no-c-format
-msgid "Floppy disk booting reportedly fails on Mac USB floppy drives."
+#, fuzzy, no-c-format
+msgid ""
+"Booting the installer from floppy disk reportedly fails on Mac USB floppy "
+"drives."
 msgstr ""
-"알려진 바에 따르면, 플로피 디스크 부팅은 Mac USB 플로피 드라이브에서 실패합니다."
+"알려진 바에 따르면, 플로피 디스크 부팅은 Mac USB 플로피 드라이브에서 실패합니"
+"다."
 
 #. Tag: para
-#: install-methods.xml:297
-#, no-c-format
-msgid "Floppy disk booting is not supported on Amigas or 68k Macs."
+#: install-methods.xml:298
+#, fuzzy, no-c-format
+msgid ""
+"Booting the installer from floppy disk is not supported on Amigas or 68k "
+"Macs."
 msgstr "플로피 디스크 부팅은 Amiga 혹은 68k Mac에서 지원하지 않습니다."
 
 #. Tag: para
-#: install-methods.xml:302
+#: install-methods.xml:303
 #, no-c-format
 msgid ""
 "Disk images are files containing the complete contents of a floppy disk in "
@@ -396,19 +402,19 @@ msgstr ""
 "터를 플로피에 <emphasis>섹터 복사</emphasis>해야 합니다."
 
 #. Tag: para
-#: install-methods.xml:313
-#, no-c-format
+#: install-methods.xml:314
+#, fuzzy, no-c-format
 msgid ""
-"There are different techniques for creating floppies from disk images, which "
-"depend on your platform. This section describes how to create floppies from "
-"disk images on different platforms."
+"There are different techniques for creating floppies from disk images. This "
+"section describes how to create floppies from disk images on different "
+"platforms."
 msgstr ""
 "디스크 이미지에서 플로피를 만드는 방법은 플랫폼에 따라 세 가지가 있습니다. 여"
 "기서는 여러 가지 플랫폼에서 디스크 이미지로 플로피를 만드는 방법을 설명합니"
 "다."
 
 #. Tag: para
-#: install-methods.xml:319
+#: install-methods.xml:320
 #, no-c-format
 msgid ""
 "No matter which method you use to create your floppies, you should remember "
@@ -419,13 +425,13 @@ msgstr ""
 "을 걸어 놓아서 플로피 내용이 손상되지 않도록 하십시오."
 
 #. Tag: title
-#: install-methods.xml:327
+#: install-methods.xml:328
 #, no-c-format
 msgid "Writing Disk Images From a Linux or Unix System"
 msgstr "리눅스나 UNIX 시스템에서 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:328
+#: install-methods.xml:329
 #, no-c-format
 msgid ""
 "To write the floppy disk image files to the floppy disks, you will probably "
@@ -465,7 +471,7 @@ msgstr ""
 "</phrase>"
 
 #. Tag: para
-#: install-methods.xml:352
+#: install-methods.xml:353
 #, no-c-format
 msgid ""
 "Some systems attempt to automatically mount a floppy disk when you place it "
@@ -497,7 +503,7 @@ msgstr ""
 "문의하십시오. </phrase>"
 
 #. Tag: para
-#: install-methods.xml:373
+#: install-methods.xml:374
 #, no-c-format
 msgid ""
 "If writing a floppy on powerpc Linux, you will need to eject it. The "
@@ -509,13 +515,13 @@ msgstr ""
 "야 할 수도 있습니다."
 
 #. Tag: title
-#: install-methods.xml:391
+#: install-methods.xml:392
 #, no-c-format
 msgid "Writing Disk Images From DOS, Windows, or OS/2"
 msgstr "DOS, Windows, OS/2에서 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:393
+#: install-methods.xml:394
 #, no-c-format
 msgid ""
 "If you have access to an i386 machine, you can use one of the following "
@@ -525,7 +531,7 @@ msgstr ""
 "오."
 
 #. Tag: para
-#: install-methods.xml:398
+#: install-methods.xml:399
 #, no-c-format
 msgid ""
 "The <command>rawrite1</command> and <command>rawrite2</command> programs can "
@@ -540,7 +546,7 @@ msgstr ""
 "emphasis>."
 
 #. Tag: para
-#: install-methods.xml:406
+#: install-methods.xml:407
 #, no-c-format
 msgid ""
 "The <command>rwwrtwin</command> program runs on Windows 95, NT, 98, 2000, "
@@ -552,7 +558,7 @@ msgstr ""
 "diskio.dll 파일을 풀어야 합니다."
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:413
 #, no-c-format
 msgid ""
 "These tools can be found on the Official Debian CD-ROMs under the <filename>/"
@@ -562,13 +568,13 @@ msgstr ""
 "습니다."
 
 #. Tag: title
-#: install-methods.xml:425
+#: install-methods.xml:426
 #, no-c-format
 msgid "Writing Disk Images on Atari Systems"
 msgstr "Atari 시스템에서 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:426
+#: install-methods.xml:427
 #, no-c-format
 msgid ""
 "You'll find the &rawwrite.ttp; program in the same directory as the floppy "
@@ -581,13 +587,13 @@ msgstr ""
 "에서 플로피에 사용하려는 플로피 이미지 파일의 이름을 입력하십시오."
 
 #. Tag: title
-#: install-methods.xml:437
+#: install-methods.xml:438
 #, no-c-format
 msgid "Writing Disk Images on Macintosh Systems"
 msgstr "Macintosh 시스템에서 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:438
+#: install-methods.xml:439
 #, no-c-format
 msgid ""
 "There is no MacOS application to write images to floppy disks (and there "
@@ -602,13 +608,13 @@ msgstr ""
 "을 설치할 때 필요합니다."
 
 #. Tag: title
-#: install-methods.xml:456
+#: install-methods.xml:457
 #, no-c-format
 msgid "Writing Disk Images From MacOS"
 msgstr "MacOS에서 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:457
+#: install-methods.xml:458
 #, no-c-format
 msgid ""
 "An AppleScript, <application>Make Debian Floppy</application>, is available "
@@ -629,7 +635,7 @@ msgstr ""
 "지 여부를 확인합니다."
 
 #. Tag: para
-#: install-methods.xml:468
+#: install-methods.xml:469
 #, no-c-format
 msgid ""
 "You can also use the MacOS utility <command>Disk Copy</command> directly, or "
@@ -643,13 +649,13 @@ msgstr ""
 "이미지를 만드려면 다음 방법 중의 하나를 사용하십시오."
 
 #. Tag: title
-#: install-methods.xml:479
+#: install-methods.xml:480
 #, no-c-format
 msgid "Writing Disk Images with <command>Disk Copy</command>"
 msgstr "<command>Disk Copy</command>로 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:480
+#: install-methods.xml:481
 #, no-c-format
 msgid ""
 "If you are creating the floppy image from files which were originally on the "
@@ -662,7 +668,7 @@ msgstr ""
 "안 미러에서 이미지 파일을 내려 받을 경우에만 상관 있습니다."
 
 #. Tag: para
-#: install-methods.xml:489
+#: install-methods.xml:490
 #, no-c-format
 msgid ""
 "Obtain <ulink url=\"&url-powerpc-creator-changer;\">Creator-Changer</ulink> "
@@ -672,7 +678,7 @@ msgstr ""
 "서 그걸 이용해 <filename>root.bin</filename> 파일을 여십시오."
 
 #. Tag: para
-#: install-methods.xml:496
+#: install-methods.xml:497
 #, no-c-format
 msgid ""
 "Change the Creator to <userinput>ddsk</userinput> (Disk Copy), and the Type "
@@ -684,7 +690,7 @@ msgstr ""
 "합니다."
 
 #. Tag: para
-#: install-methods.xml:503
+#: install-methods.xml:504
 #, no-c-format
 msgid ""
 "<emphasis>Important:</emphasis> In the Finder, use <userinput>Get Info</"
@@ -699,7 +705,7 @@ msgstr ""
 "를 마운트하더라도 부트 블록을 망가뜨리지 않습니다."
 
 #. Tag: para
-#: install-methods.xml:512
+#: install-methods.xml:513
 #, no-c-format
 msgid ""
 "Obtain <command>Disk Copy</command>; if you have a MacOS system or CD it "
@@ -711,7 +717,7 @@ msgstr ""
 "\"&url-powerpc-diskcopy;\"></ulink>에서 받으십시오."
 
 #. Tag: para
-#: install-methods.xml:519
+#: install-methods.xml:520
 #, no-c-format
 msgid ""
 "Run <command>Disk Copy</command>, and select <menuchoice> "
@@ -727,13 +733,13 @@ msgstr ""
 "지 물어봅니다. 다 마치면 플로피가 튀어 나옵니다."
 
 #. Tag: title
-#: install-methods.xml:534
+#: install-methods.xml:535
 #, no-c-format
 msgid "Writing Disk Images with <command>suntar</command>"
 msgstr "<command>suntar</command>로 디스크 이미지 쓰기"
 
 #. Tag: para
-#: install-methods.xml:538
+#: install-methods.xml:539
 #, no-c-format
 msgid ""
 "Obtain <command>suntar</command> from <ulink url=\"&url-powerpc-suntar;\"> </"
@@ -747,21 +753,21 @@ msgstr ""
 "선택하십시오."
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:547
 #, no-c-format
 msgid ""
 "Insert the floppy disk as requested, then hit &enterkey; (start at sector 0)."
 msgstr "플로피를 넣고, &enterkey;를 누르십시오. (섹터 0에서 시작)"
 
 #. Tag: para
-#: install-methods.xml:552
+#: install-methods.xml:553
 #, no-c-format
 msgid ""
 "Select the <filename>root.bin</filename> file in the file-opening dialog."
 msgstr "파일 열기 창에서 <filename>root.bin</filename> 파일을 선택하십시오."
 
 #. Tag: para
-#: install-methods.xml:557
+#: install-methods.xml:558
 #, no-c-format
 msgid ""
 "After the floppy has been created successfully, select <menuchoice> "
@@ -774,7 +780,7 @@ msgstr ""
 "오류가 발생하면 그 플로피를 꺼내고 다른 플로피로 시도해 보십시오."
 
 #. Tag: para
-#: install-methods.xml:565
+#: install-methods.xml:566
 #, no-c-format
 msgid ""
 "Before using the floppy you created, <emphasis>set the write protect tab</"
@@ -786,22 +792,21 @@ msgstr ""
 "를 망가뜨립니다."
 
 #. Tag: title
-#: install-methods.xml:584
+#: install-methods.xml:585
 #, no-c-format
 msgid "Preparing Files for USB Memory Stick Booting"
 msgstr "USB 메모리 스틱 부팅에 필요한 파일 준비하기"
 
 #. Tag: para
-#: install-methods.xml:586
-#, no-c-format
+#: install-methods.xml:587
+#, fuzzy, no-c-format
 msgid ""
-"For preparing the USB stick you will need a system where GNU/Linux is "
-"already running and where USB is supported. You should ensure that the usb-"
-"storage kernel module is loaded (<userinput>modprobe usb-storage</"
-"userinput>) and try to find out which SCSI device the USB stick has been "
-"mapped to (in this example <filename>/dev/sda</filename> is used). To write "
-"to your stick, you will probably have to turn off its write protection "
-"switch."
+"To prepare the USB stick, you will need a system where GNU/Linux is already "
+"running and where USB is supported. You should ensure that the usb-storage "
+"kernel module is loaded (<userinput>modprobe usb-storage</userinput>) and "
+"try to find out which SCSI device the USB stick has been mapped to (in this "
+"example <filename>/dev/sda</filename> is used). To write to your stick, you "
+"may have to turn off its write protection switch."
 msgstr ""
 "USB 스틱을 준비하려면 GNU/Linux가 동작하고 USB를 지원하는 시스템이 필요합니"
 "다. usb-storage 커널 모듈을 읽어들이고 (<userinput>modprobe usb-storage</"
@@ -810,23 +815,23 @@ msgstr ""
 "면, 쓰기 방지 스위치를 풀어 놓아야 할 수도 있습니다."
 
 #. Tag: para
-#: install-methods.xml:596
-#, no-c-format
+#: install-methods.xml:597
+#, fuzzy, no-c-format
 msgid ""
-"Note, that the USB stick should be at least 128 MB in size (smaller setups "
+"Note that the USB stick should be at least 128 MB in size (smaller setups "
 "are possible if you follow <xref linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 "단 USB 스틱은 크기가 최소 128MB는 되어야 합니다. (<xref linkend=\"usb-copy-"
 "flexible\"/>에 쓰여 있는 대로 하면 더 작아도 가능합니다)"
 
 #. Tag: title
-#: install-methods.xml:604
+#: install-methods.xml:605
 #, no-c-format
 msgid "Copying the files &mdash; the easy way"
 msgstr "파일 복사하기 &mdash; 쉬운 방법"
 
 #. Tag: para
-#: install-methods.xml:605
+#: install-methods.xml:606
 #, no-c-format
 msgid ""
 "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> which "
@@ -839,13 +844,13 @@ msgstr ""
 "들어 있습니다. 이 파일을 풀어서 USB 스틱에 저장해 놓기만 하면 됩니다:"
 
 #. Tag: screen
-#: install-methods.xml:612
+#: install-methods.xml:613
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sda</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sda</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:614
+#: install-methods.xml:615
 #, no-c-format
 msgid ""
 "There is an all-in-one file <filename>hd-media/boot.img.gz</filename> which "
@@ -862,13 +867,13 @@ msgstr ""
 "풀어 놓으십시오:"
 
 #. Tag: screen
-#: install-methods.xml:623
+#: install-methods.xml:624
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sda2</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sda2</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:626
+#: install-methods.xml:627
 #, no-c-format
 msgid ""
 "Using this method will destroy anything already on the device. Make sure "
@@ -878,7 +883,7 @@ msgstr ""
 "름을 올바르게 사용하도록 주의하십시오."
 
 #. Tag: para
-#: install-methods.xml:632
+#: install-methods.xml:633
 #, no-c-format
 msgid ""
 "After that, mount the USB memory stick (<userinput>mount <replaceable arch="
@@ -899,13 +904,13 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)"
 
 #. Tag: title
-#: install-methods.xml:648
+#: install-methods.xml:649
 #, no-c-format
 msgid "Copying the files &mdash; the flexible way"
 msgstr "파일 복사하기 &mdash; 유연한 방법"
 
 #. Tag: para
-#: install-methods.xml:649
+#: install-methods.xml:650
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -915,13 +920,13 @@ msgstr ""
 "다면, 다음 방법으로 파일을 USB 스틱에 집어 넣으십시오."
 
 #. Tag: title
-#: install-methods.xml:661 install-methods.xml:753
+#: install-methods.xml:662 install-methods.xml:754
 #, no-c-format
 msgid "USB stick partitioning on &arch-title;"
 msgstr "&arch-title;에서 USB 스틱 파티션하기"
 
 #. Tag: para
-#: install-methods.xml:662
+#: install-methods.xml:663
 #, no-c-format
 msgid ""
 "We will show how to setup the memory stick to use the first partition, "
@@ -931,13 +936,13 @@ msgstr ""
 "방법입니다."
 
 #. Tag: para
-#: install-methods.xml:667
-#, no-c-format
+#: install-methods.xml:668
+#, fuzzy, no-c-format
 msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
 "probably won't have to repartition or reformat the stick. If you have to do "
-"that anyway, use <command>cfdisk</command> or any other partitioning tool "
-"for creating a FAT16 partition and then create the filesystem using: "
+"that anyway, use <command>cfdisk</command> or any other partitioning tool to "
+"create a FAT16 partition, and then create the filesystem using: "
 "<informalexample><screen>\n"
 "# mkdosfs /dev/<replaceable>sda1</replaceable>\n"
 "</screen></informalexample> Take care that you use the correct device name "
@@ -954,7 +959,7 @@ msgstr ""
 "러미에 들어 있습니다."
 
 #. Tag: para
-#: install-methods.xml:681
+#: install-methods.xml:682
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -972,7 +977,7 @@ msgstr ""
 "더를 설정할 때 이용할 수 있습니다."
 
 #. Tag: para
-#: install-methods.xml:691
+#: install-methods.xml:692
 #, no-c-format
 msgid ""
 "To put <command>SYSLINUX</command> on the FAT16 partition on your USB stick, "
@@ -995,7 +1000,7 @@ msgstr ""
 "<filename>ldlinux.sys</filename> 파일을 만듭니다."
 
 #. Tag: para
-#: install-methods.xml:704
+#: install-methods.xml:705
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/sda1 /mnt</userinput>) and copy "
@@ -1018,7 +1023,7 @@ msgstr ""
 "command>에서는 DOS 파일이름만 (8.3 방식) 사용할 수 있다는 점을 주의하십시오."
 
 #. Tag: para
-#: install-methods.xml:735
+#: install-methods.xml:736
 #, no-c-format
 msgid ""
 "The <filename>syslinux.cfg</filename> configuration file should contain the "
@@ -1037,7 +1042,7 @@ msgstr ""
 "<userinput>ramdisk_size</userinput> 파라미터 값을 늘려야 할 수도 있습니다. "
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:755
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -1064,7 +1069,7 @@ msgstr ""
 "꾸러미에 들어 있습니다."
 
 #. Tag: para
-#: install-methods.xml:770
+#: install-methods.xml:771
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -1079,7 +1084,7 @@ msgstr ""
 "체제라도 부트로더 설정을 바꾸는 데 이용할 수 있습니다."
 
 #. Tag: para
-#: install-methods.xml:779
+#: install-methods.xml:780
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -1114,7 +1119,7 @@ msgstr ""
 "의 나머지를 준비할 수 있습니다."
 
 #. Tag: para
-#: install-methods.xml:795
+#: install-methods.xml:796
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/sda2 /mnt</userinput>) and copy "
@@ -1124,37 +1129,37 @@ msgstr ""
 "이브에서 다음 파일을 USB 스틱으로 복사하십시오:"
 
 #. Tag: para
-#: install-methods.xml:801
+#: install-methods.xml:802
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (커널 바이너리)"
 
 #. Tag: para
-#: install-methods.xml:806
+#: install-methods.xml:807
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (최초 램디스크 이미지)"
 
 #. Tag: para
-#: install-methods.xml:811
+#: install-methods.xml:812
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (yaboot 설정 파일)"
 
 #. Tag: para
-#: install-methods.xml:816
+#: install-methods.xml:817
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (추가 부팅 메세지)"
 
 #. Tag: para
-#: install-methods.xml:821
+#: install-methods.xml:822
 #, no-c-format
 msgid "Optional kernel modules"
 msgstr "추가 커널 모듈"
 
 #. Tag: para
-#: install-methods.xml:828
+#: install-methods.xml:829
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -1189,25 +1194,27 @@ msgstr ""
 "팅하려는 이미지에 따라 크기를 늘려야 할 수도 있습니다."
 
 #. Tag: title
-#: install-methods.xml:843
+#: install-methods.xml:845
 #, no-c-format
 msgid "Adding an ISO image"
 msgstr "ISO 이미지 추가하기"
 
 #. Tag: para
-#: install-methods.xml:844
-#, no-c-format
+#: install-methods.xml:846
+#, fuzzy, no-c-format
 msgid ""
-"Now you should put any Debian ISO image (businesscard, netinst or even a "
-"full one) onto your stick (if it fits). The file name of such an image must "
-"end in <filename>.iso</filename>."
+"The installer will look for a Debian ISO image on the stick as its source "
+"for additional data needed for the installation. So your next step is to "
+"copy a Debian ISO image (businesscard, netinst or even a full CD image) onto "
+"your stick (be sure to select one that fits). The file name of the image "
+"must end in <filename>.iso</filename>."
 msgstr ""
 "데비안 ISO 이미지를 (비지니스 카드, 네트워크 설치 아니면 완전한 버전이라도) "
 "USB 스틱에 (들어간다면) 넣습니다. 이미지의 파일 이름은 <filename>.iso</"
 "filename>로 끝나야 합니다."
 
 #. Tag: para
-#: install-methods.xml:850
+#: install-methods.xml:854
 #, no-c-format
 msgid ""
 "If you want to install over the network, without using an ISO image, you "
@@ -1223,7 +1230,7 @@ msgstr ""
 "다."
 
 #. Tag: para
-#: install-methods.xml:859
+#: install-methods.xml:863
 #, no-c-format
 msgid ""
 "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
@@ -1233,13 +1240,13 @@ msgstr ""
 "userinput>) 쓰기 방지 스위치를 거십시오?"
 
 #. Tag: title
-#: install-methods.xml:869
+#: install-methods.xml:873
 #, no-c-format
 msgid "Booting the USB stick"
 msgstr "USB 스틱 부팅하기"
 
 #. Tag: para
-#: install-methods.xml:870
+#: install-methods.xml:874
 #, no-c-format
 msgid ""
 "If your system refuses to boot from the memory stick, the stick may contain "
@@ -1251,19 +1258,19 @@ msgstr ""
 "<command>install-mbr</command> 명령을 사용하십시오:"
 
 #. Tag: screen
-#: install-methods.xml:877
+#: install-methods.xml:881
 #, no-c-format
 msgid "# install-mbr /dev/<replaceable>sda</replaceable>"
 msgstr "# install-mbr /dev/<replaceable>sda</replaceable>"
 
 #. Tag: title
-#: install-methods.xml:889
+#: install-methods.xml:892
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "하드 디스크 부팅에 필요한 파일 준비하기"
 
 #. Tag: para
-#: install-methods.xml:890
+#: install-methods.xml:893
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -1275,7 +1282,7 @@ msgstr ""
 "접 부트 로더를 실행할 수도 있습니다."
 
 #. Tag: para
-#: install-methods.xml:896
+#: install-methods.xml:899
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1288,13 +1295,13 @@ msgstr ""
 "불안한 플로피와 씨름할 필요도 없습니다."
 
 #. Tag: para
-#: install-methods.xml:903
+#: install-methods.xml:906
 #, no-c-format
 msgid "The installer cannot boot from files on an NTFS file system."
 msgstr "설치 프로그램은 NTFS 파일시스템의 파일에서는 부팅할 수 없습니다."
 
 #. Tag: para
-#: install-methods.xml:907
+#: install-methods.xml:910
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1316,7 +1323,7 @@ msgstr ""
 "을 때 이 파티션이 필요합니다."
 
 #. Tag: para
-#: install-methods.xml:918
+#: install-methods.xml:921
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1327,7 +1334,7 @@ msgstr ""
 "따라, 하드 디스크로 설치 시스템을 부팅할 때 여러 가지 프로그램을 사용합니다."
 
 #. Tag: title
-#: install-methods.xml:927
+#: install-methods.xml:930
 #, no-c-format
 msgid ""
 "Hard disk installer booting using <command>LILO</command> or <command>GRUB</"
@@ -1337,7 +1344,7 @@ msgstr ""
 "치 프로그램 부팅"
 
 #. Tag: para
-#: install-methods.xml:929
+#: install-methods.xml:932
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1348,7 +1355,7 @@ msgstr ""
 "합니다."
 
 #. Tag: para
-#: install-methods.xml:935
+#: install-methods.xml:938
 #, no-c-format
 msgid ""
 "At boot time, both bootloaders support loading in memory not only the "
@@ -1360,7 +1367,7 @@ msgstr ""
 "수 있습니다."
 
 #. Tag: para
-#: install-methods.xml:941
+#: install-methods.xml:944
 #, no-c-format
 msgid ""
 "Copy the following files from the Debian archives to a convenient location "
@@ -1370,19 +1377,19 @@ msgstr ""
 "를 들어 <filename>/boot/newinstall/</filename>같은 위치로 복사하십시오."
 
 #. Tag: para
-#: install-methods.xml:948
+#: install-methods.xml:951
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (커널 바이너리)"
 
 #. Tag: para
-#: install-methods.xml:953
+#: install-methods.xml:956
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (램디스크 이미지)"
 
 #. Tag: para
-#: install-methods.xml:960
+#: install-methods.xml:963
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1392,13 +1399,13 @@ msgstr ""
 "행하십시오."
 
 #. Tag: title
-#: install-methods.xml:970
+#: install-methods.xml:973
 #, no-c-format
 msgid "Hard Disk Installer Booting for OldWorld Macs"
 msgstr "OldWorld Mac에서 하드 디스크 설치 프로그램 부팅"
 
 #. Tag: para
-#: install-methods.xml:971
+#: install-methods.xml:974
 #, no-c-format
 msgid ""
 "The <filename>boot-floppy-hfs</filename> floppy uses <application>miBoot</"
@@ -1421,7 +1428,7 @@ msgstr ""
 "없습니다. 그래서 이 모델에서는 <application>BootX</application>가 필요합니다."
 
 #. Tag: para
-#: install-methods.xml:984
+#: install-methods.xml:987
 #, no-c-format
 msgid ""
 "Download and unstuff the <application>BootX</application> distribution, "
@@ -1448,13 +1455,13 @@ msgstr ""
 "으십시오."
 
 #. Tag: title
-#: install-methods.xml:1004
+#: install-methods.xml:1007
 #, no-c-format
 msgid "Hard Disk Installer Booting for NewWorld Macs"
 msgstr "NewWorld Mac에서 하드 디스크 설치 프로그램 부팅"
 
 #. Tag: para
-#: install-methods.xml:1005
+#: install-methods.xml:1008
 #, no-c-format
 msgid ""
 "NewWorld PowerMacs support booting from a network or an ISO9660 CD-ROM, as "
@@ -1474,7 +1481,7 @@ msgstr ""
 "하지 않고 NewWorld PowerMac에서는 사용해서는 안 됩니다."
 
 #. Tag: para
-#: install-methods.xml:1016
+#: install-methods.xml:1019
 #, no-c-format
 msgid ""
 "<emphasis>Copy</emphasis> (not move) the following four files which you "
@@ -1488,38 +1495,38 @@ msgstr ""
 "다.)"
 
 #. Tag: filename
-#: install-methods.xml:1026
+#: install-methods.xml:1029
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1031
+#: install-methods.xml:1034
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1036
+#: install-methods.xml:1039
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1041
+#: install-methods.xml:1044
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: para
-#: install-methods.xml:1046
-#, no-c-format
+#: install-methods.xml:1049
+#, fuzzy, no-c-format
 msgid ""
 "Make a note of the partition number of the MacOS partition where you place "
 "these files. If you have the MacOS <command>pdisk</command> program, you can "
-"use the L command to check for the partition number. You will need this "
-"partition number for the command you type at the Open Firmware prompt when "
-"you boot the installer."
+"use the <command>L</command> command to check for the partition number. You "
+"will need this partition number for the command you type at the Open "
+"Firmware prompt when you boot the installer."
 msgstr ""
 "이 파일은 넣어 둔 MacOS 파티션의 파티션 번호를 적어 놓으십시오. MacOS의 "
 "<command>pdisk</command> 프로그램이 있으면, L 명령으로 파티션 번호를 알아낼 "
@@ -1527,7 +1534,7 @@ msgstr ""
 "을 부팅하는 명령에서 사용합니다."
 
 #. Tag: para
-#: install-methods.xml:1054
+#: install-methods.xml:1057
 #, no-c-format
 msgid "To boot the installer, proceed to <xref linkend=\"boot-newworld\"/>."
 msgstr ""
@@ -1535,13 +1542,13 @@ msgstr ""
 "진행하십시오."
 
 #. Tag: title
-#: install-methods.xml:1067
+#: install-methods.xml:1070
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "TFTP 네트워크 부팅에 필요한 파일 준비하기"
 
 #. Tag: para
-#: install-methods.xml:1068
+#: install-methods.xml:1071
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1555,7 +1562,7 @@ msgstr ""
 "정 위치에 복사해 놓고, 해당 기계의 부팅을 지원하도록 설정해 놓아야 합니다."
 
 #. Tag: para
-#: install-methods.xml:1076
+#: install-methods.xml:1079
 #, no-c-format
 msgid ""
 "You need to setup a TFTP server, and for many machines, a BOOTP server "
@@ -1567,7 +1574,7 @@ msgstr ""
 "\"supports-dhcp\">, 아니면 DHCP 서버</phrase>를 설정해야 합니다."
 
 #. Tag: para
-#: install-methods.xml:1082
+#: install-methods.xml:1085
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1593,7 +1600,7 @@ msgstr ""
 "있습니다. </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1099
+#: install-methods.xml:1102
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1605,7 +1612,7 @@ msgstr ""
 "다."
 
 #. Tag: para
-#: install-methods.xml:1105
+#: install-methods.xml:1108
 #, no-c-format
 msgid ""
 "Unlike the Open Firmware found on Sparc and PowerPC machines, the SRM "
@@ -1628,7 +1635,7 @@ msgstr ""
 "도 있습니다."
 
 #. Tag: para
-#: install-methods.xml:1122
+#: install-methods.xml:1125
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1639,7 +1646,7 @@ msgstr ""
 "다."
 
 #. Tag: para
-#: install-methods.xml:1127
+#: install-methods.xml:1130
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1653,7 +1660,7 @@ msgstr ""
 "서 사용하는 명령을 예로 듭니다."
 
 #. Tag: para
-#: install-methods.xml:1135
+#: install-methods.xml:1138
 #, no-c-format
 msgid ""
 "To use the Pre-boot Execution Environment (PXE) method of TFTP booting, you "
@@ -1668,13 +1675,13 @@ msgstr ""
 "권장합니다."
 
 #. Tag: title
-#: install-methods.xml:1153
+#: install-methods.xml:1156
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "RARP 서버 준비하기"
 
 #. Tag: para
-#: install-methods.xml:1154
+#: install-methods.xml:1157
 #, no-c-format
 msgid ""
 "To setup RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1693,7 +1700,7 @@ msgstr ""
 "ifconfig eth0</userinput> 명령을 이용할 수 있습니다."
 
 #. Tag: para
-#: install-methods.xml:1166
+#: install-methods.xml:1169
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux 2.2.x kernel, you need to populate the "
@@ -1730,7 +1737,7 @@ msgstr ""
 "userinput> 명령을 실행하고 <command>rarp</command> 명령을 실행해 보십시오."
 
 #. Tag: para
-#: install-methods.xml:1182
+#: install-methods.xml:1185
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux 2.4.x kernel, there is no RARP module, "
@@ -1742,7 +1749,7 @@ msgstr ""
 "서 사용하는 방법과 비슷합니다."
 
 #. Tag: para
-#: install-methods.xml:1190
+#: install-methods.xml:1193
 #, no-c-format
 msgid ""
 "Under SunOS, you need to ensure that the Ethernet hardware address for the "
@@ -1760,19 +1767,20 @@ msgstr ""
 "userinput> 명령을 사용하십시오."
 
 #. Tag: title
-#: install-methods.xml:1209
+#: install-methods.xml:1212
 #, no-c-format
 msgid "Setting up BOOTP server"
 msgstr "BOOTP 서버 준비하기"
 
 #. Tag: para
-#: install-methods.xml:1210
-#, no-c-format
+#: install-methods.xml:1213
+#, fuzzy, no-c-format
 msgid ""
-"There are two BOOTP servers available for GNU/Linux, the CMU "
-"<command>bootpd</command> and the other is actually a DHCP server, ISC "
-"<command>dhcpd</command>, which are contained in the <classname>bootp</"
-"classname> and <classname>dhcp</classname> packages in &debian;."
+"There are two BOOTP servers available for GNU/Linux. The first is CMU "
+"<command>bootpd</command>. The other is actually a DHCP server: ISC "
+"<command>dhcpd</command>. In &debian; these are contained in the "
+"<classname>bootp</classname> and <classname>dhcp</classname> packages "
+"respectively."
 msgstr ""
 "GNU/Linux용 BOOTP 서버는 두 가지가 있습니다. CMU <command>bootpd</command>가 "
 "있고, 그 외의 프로그램은 실제로 DHCP서버인, ISC <command>dhcpd</command>가 있"
@@ -1780,14 +1788,15 @@ msgstr ""
 "classname>와 <classname>dhcp</classname> 꾸러미에 들어 있습니다."
 
 #. Tag: para
-#: install-methods.xml:1218
-#, no-c-format
+#: install-methods.xml:1221
+#, fuzzy, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
 "relevant line in <filename>/etc/inetd.conf</filename>. On &debian;, you can "
 "run <userinput>update-inetd --enable bootps</userinput>, then <userinput>/"
-"etc/init.d/inetd reload</userinput> to do so. Elsewhere, the line in "
-"question should look like: <informalexample><screen>\n"
+"etc/init.d/inetd reload</userinput> to do so. Just in case your BOOTP server "
+"does not run Debian, the line in question should look like: "
+"<informalexample><screen>\n"
 "bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
 "</screen></informalexample> Now, you must create an <filename>/etc/bootptab</"
 "filename> file. This has the same sort of familiar and cryptic format as the "
@@ -1813,18 +1822,18 @@ msgid ""
 "userinput> variable is the machine's MAC address. </phrase>"
 msgstr ""
 "CMU <command>bootpd</command>를 사용하려면, <filename>/etc/inetd.conf</"
-"filename>에서 관련된 줄의 주석을 없애거나 한 줄을 추가해야 합니다. &debian;"
-"에선  <userinput>update-inetd --enable bootps</userinput>를 실행한 다음 적용"
-"하려면 <userinput>/etc/init.d/inetd reload</userinput> 명령을 실행합니다. 문제에 "
-"나온 줄은 다음과 같은 모양입니다: <informalexample><screen>\n"
+"filename>에서 관련된 줄의 주석을 없애거나 한 줄을 추가해야 합니다. &debian;에"
+"선  <userinput>update-inetd --enable bootps</userinput>를 실행한 다음 적용하"
+"려면 <userinput>/etc/init.d/inetd reload</userinput> 명령을 실행합니다. 문제"
+"에 나온 줄은 다음과 같은 모양입니다: <informalexample><screen>\n"
 "bootps  dgram  udp  wait  root  /usr/sbin/bootpd  bootpd -i -t 120\n"
 "</screen></informalexample> 이제 <filename>/etc/bootptab</filename> 파일을 만"
 "들어야 합니다. 이 파일은 과거의 BSD <filename>printcap</filename>, "
-"<filename>termcap</filename>, <filename>disktab</filename> 파일과 유사한 "
-"형식으로 되어 있습니다. 더 자세한 정보는 <filename>bootptab</filename> 매뉴얼 "
-"페이지를 참고하십시오. CMU <command>bootpd</command>에서는, 클라이언트의 "
-"하드웨어 (MAC) 주소를 알아야 합니다. 다음은 <filename>/etc/bootptab</filename>의 예입니다: "
-"<informalexample><screen>\n"
+"<filename>termcap</filename>, <filename>disktab</filename> 파일과 유사한 형식"
+"으로 되어 있습니다. 더 자세한 정보는 <filename>bootptab</filename> 매뉴얼 페"
+"이지를 참고하십시오. CMU <command>bootpd</command>에서는, 클라이언트의 하드웨"
+"어 (MAC) 주소를 알아야 합니다. 다음은 <filename>/etc/bootptab</filename>의 예"
+"입니다: <informalexample><screen>\n"
 "client:\\\n"
 "  hd=/tftpboot:\\\n"
 "  bf=tftpboot.img:\\\n"
@@ -1835,12 +1844,12 @@ msgstr ""
 "</screen></informalexample> 위에서 최소한 <quote>ha</quote> 옵션은 바꿔야 합"
 "니다. 이 옵션은 클라이언트의 하드웨어 주소를 나타냅니다. <quote>bf</quote> 옵"
 "션은 TFTP로 클라이언트가 받게 될 파일을 지정합니다. 자세한 정보는 <xref "
-"linkend=\"tftp-images\"/> 부분을 참고하십시오. <phrase arch=\"mips\"> SGI "
-"기계에서는 커맨드 모니터로 들어가서 <userinput>printenv</userinput>라고 입력"
-"하면 됩니다. <userinput>eaddr</userinput> 변수의 값이 MAC 주소입니다. </phrase>"
+"linkend=\"tftp-images\"/> 부분을 참고하십시오. <phrase arch=\"mips\"> SGI 기"
+"계에서는 커맨드 모니터로 들어가서 <userinput>printenv</userinput>라고 입력하"
+"면 됩니다. <userinput>eaddr</userinput> 변수의 값이 MAC 주소입니다. </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1251
+#: install-methods.xml:1254
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1861,13 +1870,13 @@ msgstr ""
 "<command>dhcpd</command>를 다시 시작하면 됩니다."
 
 #. Tag: title
-#: install-methods.xml:1272
+#: install-methods.xml:1275
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "DHCP 서버 설정하기"
 
 #. Tag: para
-#: install-methods.xml:1273
+#: install-methods.xml:1276
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. In &debian;, "
@@ -1923,7 +1932,7 @@ msgstr ""
 "꾸러미는 <filename>/etc/dhcp3/dhcpd.conf</filename> 파일을 사용합니다."
 
 #. Tag: para
-#: install-methods.xml:1285
+#: install-methods.xml:1288
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1940,7 +1949,7 @@ msgstr ""
 "다."
 
 #. Tag: para
-#: install-methods.xml:1295
+#: install-methods.xml:1298
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1951,13 +1960,13 @@ msgstr ""
 "오."
 
 #. Tag: title
-#: install-methods.xml:1303
+#: install-methods.xml:1306
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "DHCP 설정에서 PXE 부팅하게 만들기"
 
 #. Tag: para
-#: install-methods.xml:1304
+#: install-methods.xml:1307
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -2027,13 +2036,13 @@ msgstr ""
 "linkend=\"tftp-images\"/> 부분 참고)"
 
 #. Tag: title
-#: install-methods.xml:1320
+#: install-methods.xml:1323
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "TFTP Server 사용하기"
 
 #. Tag: para
-#: install-methods.xml:1321
+#: install-methods.xml:1324
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -2052,7 +2061,7 @@ msgstr ""
 "이런 설정이 들어갑니다."
 
 #. Tag: para
-#: install-methods.xml:1332
+#: install-methods.xml:1335
 #, no-c-format
 msgid ""
 "Look in that file and remember the directory which is used as the argument "
@@ -2077,7 +2086,7 @@ msgstr ""
 "<replaceable>inetd-pid</replaceable></userinput> 명령을 실행합니다."
 
 #. Tag: para
-#: install-methods.xml:1346
+#: install-methods.xml:1349
 #, no-c-format
 msgid ""
 "If you intend to install Debian on an SGI machine and your TFTP server is a "
@@ -2107,13 +2116,13 @@ msgstr ""
 "를 조정합니다."
 
 #. Tag: title
-#: install-methods.xml:1368
+#: install-methods.xml:1371
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "TFTP 이미지를 적당한 위치에 옮기기"
 
 #. Tag: para
-#: install-methods.xml:1369
+#: install-methods.xml:1372
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -2131,7 +2140,7 @@ msgstr ""
 "하고, 어떤 표준도 없습니다."
 
 #. Tag: para
-#: install-methods.xml:1379
+#: install-methods.xml:1382
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -2148,7 +2157,7 @@ msgstr ""
 "filename>로 이름을 바꾸십시오."
 
 #. Tag: para
-#: install-methods.xml:1388
+#: install-methods.xml:1391
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2164,7 +2173,7 @@ msgstr ""
 "시오."
 
 #. Tag: para
-#: install-methods.xml:1396
+#: install-methods.xml:1399
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -2180,20 +2189,21 @@ msgstr ""
 "DHCP 서버에 설정하십시오."
 
 #. Tag: title
-#: install-methods.xml:1408
+#: install-methods.xml:1411
 #, no-c-format
 msgid "DECstation TFTP Images"
 msgstr "DECstation TFTP 이미지"
 
 #. Tag: para
-#: install-methods.xml:1409
-#, no-c-format
+#: install-methods.xml:1412
+#, fuzzy, no-c-format
 msgid ""
 "For DECstations, there are tftpimage files for each subarchitecture, which "
 "contain both kernel and installer in one file. The naming convention is "
-"<replaceable>subarchitecture</replaceable>/netboot-boot.img. Copy the "
-"tftpimage file you would like to use to <userinput>/tftpboot/tftpboot.img</"
-"userinput> if you work with the example BOOTP/DHCP setups described above."
+"<filename><replaceable>subarchitecture</replaceable>/netboot-boot.img</"
+"filename>. Copy the tftpimage file you would like to use to <userinput>/"
+"tftpboot/tftpboot.img</userinput> if you work with the example BOOTP/DHCP "
+"setups described above."
 msgstr ""
 "DECstations에서는, 각 서브 아키텍처마다 TFTP 이미지 파일이 있습니다. 각 이미"
 "지 파일에는 커널과 설치 프로그램이 한 파일에 들어 있습니다. 그 이름은 "
@@ -2202,7 +2212,7 @@ msgstr ""
 "을 <userinput>/tftpboot/tftpboot.img</userinput> 파일로 복사하십시오."
 
 #. Tag: para
-#: install-methods.xml:1418
+#: install-methods.xml:1422
 #, no-c-format
 msgid ""
 "The DECstation firmware boots by TFTP with the command <userinput>boot "
@@ -2216,16 +2226,17 @@ msgstr ""
 "tftp</userinput> 명령으로 부팅합니다. 여기서 <replaceable>#</replaceable>은 "
 "부팅하려는 TurboChannel 장치의 번호입니다. 대부분의 DECstation에서 이 번호는 "
 "<quote>3</quote>입니다. BOOTP/DHCP 서버에서 파일 이름이 넘겨주지 않거나 파라"
-"미터를 추가로 더 넘겨야 한다면, 파라미터를 다음 문법에 따라 추가할 수 있습니다:"
+"미터를 추가로 더 넘겨야 한다면, 파라미터를 다음 문법에 따라 추가할 수 있습니"
+"다:"
 
 #. Tag: userinput
-#: install-methods.xml:1430
+#: install-methods.xml:1434
 #, no-c-format
 msgid "boot #/tftp/filename param1=value1 param2=value2 ..."
 msgstr "boot #/tftp/filename 파라미터1=값1 파라미터2=값2 ..."
 
 #. Tag: para
-#: install-methods.xml:1432
+#: install-methods.xml:1436
 #, no-c-format
 msgid ""
 "Several DECstation firmware revisions show a problem with regard to net "
@@ -2262,13 +2273,13 @@ msgstr ""
 "ulink>"
 
 #. Tag: title
-#: install-methods.xml:1470
+#: install-methods.xml:1474
 #, no-c-format
 msgid "Alpha TFTP Booting"
 msgstr "Alpha TFTP 부팅"
 
 #. Tag: para
-#: install-methods.xml:1471
+#: install-methods.xml:1475
 #, no-c-format
 msgid ""
 "On Alpha, you must specify the filename (as a relative path to the boot "
@@ -2290,27 +2301,28 @@ msgstr ""
 "정해야 합니다</emphasis>."
 
 #. Tag: title
-#: install-methods.xml:1486
+#: install-methods.xml:1490
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "SPARC TFTP 부팅"
 
 #. Tag: para
-#: install-methods.xml:1487
-#, no-c-format
+#: install-methods.xml:1491
+#, fuzzy, no-c-format
 msgid ""
-"SPARC architectures for instance use the subarchitecture names, such as "
-"<quote>SUN4M</quote> or <quote>SUN4C</quote>; in some cases, the "
-"architecture is left blank, so the file the client looks for is just "
-"<filename>client-ip-in-hex</filename>. Thus, if your system subarchitecture "
-"is a SUN4C, and its IP is 192.168.1.3, the filename would be "
-"<filename>C0A80103.SUN4C</filename>. An easy way to determine this is to "
-"enter the following command in a shell (assuming the machine's intended IP "
-"is 10.0.0.4). <informalexample><screen>\n"
+"Some SPARC architectures add the subarchitecture names, such as "
+"<quote>SUN4M</quote> or <quote>SUN4C</quote>, to the filename. Thus, if your "
+"system's subarchitecture is a SUN4C, and its IP is 192.168.1.3, the filename "
+"would be <filename>C0A80103.SUN4C</filename>. However, there are also "
+"subarchitectures where the file the client looks for is just "
+"<filename>client-ip-in-hex</filename>. An easy way to determine the "
+"hexadecimal code for the IP address is to enter the following command in a "
+"shell (assuming the machine's intended IP is 10.0.0.4). "
+"<informalexample><screen>\n"
 "$ printf '%.2x%.2x%.2x%.2x\\n' 10 0 0 4\n"
-"</screen></informalexample> This will spit out the IP in hexadecimal; to get "
-"to the correct filename, you will need to change all letters to uppercase "
-"and if necessary append the subarchitecture name."
+"</screen></informalexample> To get to the correct filename, you will need to "
+"change all letters to uppercase and if necessary append the subarchitecture "
+"name."
 msgstr ""
 "예를 들어 sparc 아키텍처에서는 서브 아키텍처 이름을 사용합니다. "
 "<quote>SUN4M</quote>, <quote>SUN4C</quote>과 같이 씁니다. 만약 아키텍처를 비"
@@ -2325,7 +2337,7 @@ msgstr ""
 "니다."
 
 #. Tag: para
-#: install-methods.xml:1504
+#: install-methods.xml:1507
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -2338,13 +2350,13 @@ msgstr ""
 "userinput>. 파일은 TFTP 서버가 찾는 디렉토리 안에 들어 있어야 합니다."
 
 #. Tag: title
-#: install-methods.xml:1515
+#: install-methods.xml:1518
 #, no-c-format
 msgid "BVM/Motorola TFTP Booting"
 msgstr "BVM/Motorola TFTP 부팅"
 
 #. Tag: para
-#: install-methods.xml:1516
+#: install-methods.xml:1519
 #, no-c-format
 msgid ""
 "For BVM and Motorola VMEbus systems copy the files &bvme6000-tftp-files; to "
@@ -2354,7 +2366,7 @@ msgstr ""
 "tftpboot/</filename> 디렉토리에 복사하십시오."
 
 #. Tag: para
-#: install-methods.xml:1521
+#: install-methods.xml:1524
 #, no-c-format
 msgid ""
 "Next, configure your boot ROMs or BOOTP server to initially load the "
@@ -2369,13 +2381,13 @@ msgstr ""
 "<filename>tftplilo.txt</filename> 파일을 참고하십시오."
 
 #. Tag: title
-#: install-methods.xml:1533
+#: install-methods.xml:1536
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "SGI TFTP 부팅"
 
 #. Tag: para
-#: install-methods.xml:1534
+#: install-methods.xml:1537
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -2389,29 +2401,29 @@ msgstr ""
 "<userinput>filename=</userinput> 옵션으로 지정합니다."
 
 #. Tag: title
-#: install-methods.xml:1546
+#: install-methods.xml:1549
 #, no-c-format
 msgid "Broadcom BCM91250A and BCM91480B TFTP Booting"
 msgstr "Broadcom BCM91250A과 BCM91480B TFTP 부팅"
 
 #. Tag: para
-#: install-methods.xml:1547
-#, no-c-format
+#: install-methods.xml:1550
+#, fuzzy, no-c-format
 msgid ""
 "You don't have to configure DHCP in a special way because you'll pass the "
-"full path of the file to the loaded to CFE."
+"full path of the file to be loaded to CFE."
 msgstr ""
 "CFE로 읽어들일 파일의 전체 경로를 넘기기 때문에 DHCP를 특별히 설정할 필요가 "
 "없습니다."
 
 #. Tag: title
-#: install-methods.xml:1652
+#: install-methods.xml:1655
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "자동 설치"
 
 #. Tag: para
-#: install-methods.xml:1653
+#: install-methods.xml:1656
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -2427,13 +2439,13 @@ msgstr ""
 "할 수도 있습니다."
 
 #. Tag: title
-#: install-methods.xml:1666
+#: install-methods.xml:1669
 #, no-c-format
 msgid "Automatic Installation Using the Debian Installer"
 msgstr "데비안 설치 프로그램을 이용한 자동 설치"
 
 #. Tag: para
-#: install-methods.xml:1667
+#: install-methods.xml:1670
 #, no-c-format
 msgid ""
 "The Debian Installer supports automating installs via preconfiguration "
@@ -2446,7 +2458,7 @@ msgstr ""
 "다. 이 파일 안에는 설치 과정에서 나오는 질문에 대한 대답들이 들어 있습니다."
 
 #. Tag: para
-#: install-methods.xml:1674
+#: install-methods.xml:1677
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "