[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 422 insertions, 221 deletions

diff --git a/po/ja/install-methods.po b/po/ja/install-methods.po
index 4c98e774e..aa9e78572 100644
--- a/po/ja/install-methods.po
+++ b/po/ja/install-methods.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-12-02 23:02+0000\n"
+"POT-Creation-Date: 2021-10-27 23:02+0000\n"
 "PO-Revision-Date: 2021-06-28 03:32+0000\n"
 "Last-Translator: YOSHINO Yoshihito <yy.y.ja.jp@gmail.com>\n"
 "Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
@@ -334,7 +334,18 @@ msgstr "USB メモリでの起動用ファイルの準備"
 
 #. Tag: para
 #: install-methods.xml:240
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
+#| "already running and where USB is supported. With current GNU/Linux "
+#| "systems the USB stick should be automatically recognized when you insert "
+#| "it. If it is not you should check that the usb-storage kernel module is "
+#| "loaded. When the USB stick is inserted, it will be mapped to a device "
+#| "named <filename>/dev/sdX</filename>, where the <quote>X</quote> is a "
+#| "letter in the range a-z. You should be able to see to which device the "
+#| "USB stick was mapped by running the command <command>dmesg</command> "
+#| "after inserting it. To write to your stick, you may have to turn off its "
+#| "write protection switch."
 msgid ""
 "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
 "already running and where USB is supported. With current GNU/Linux systems "
@@ -343,8 +354,10 @@ msgid ""
 "the USB stick is inserted, it will be mapped to a device named <filename>/"
 "dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
 "You should be able to see to which device the USB stick was mapped by "
-"running the command <command>dmesg</command> after inserting it. To write to "
-"your stick, you may have to turn off its write protection switch."
+"running the command <command>lsblk</command> before and after inserting it. "
+"(The output of <command>dmesg</command> (as root) is another possible method "
+"for that.) To write to your stick, you may have to turn off its write "
+"protection switch."
 msgstr ""
 "USB メモリの準備をするには、GNU/Linux が既に動いていて、USB をサポートしてい"
 "るシステムを使うことをお勧めします。現在の GNU/Linux では、USB メモリを挿すと"
@@ -356,32 +369,45 @@ msgstr ""
 "テクトスイッチを切る必要があります。"
 
 #. Tag: para
-#: install-methods.xml:253
-#, no-c-format
+#: install-methods.xml:255
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The procedures described in this section will destroy anything already on "
+#| "the device! Make very sure that you use the correct device name for your "
+#| "USB stick. If you use the wrong device the result could be that all "
+#| "information on for example a hard disk could be lost."
 msgid ""
 "The procedures described in this section will destroy anything already on "
 "the device! Make very sure that you use the correct device name for your USB "
 "stick. If you use the wrong device the result could be that all information "
-"on for example a hard disk could be lost."
+"on, for example, a hard disk is lost."
 msgstr ""
 "この方法を使うとデバイス上の既存の物は破壊されてしまいます! USB メモリの正し"
 "いデバイス名を必ず確認して使用してください。間違ったデバイス名を使用すると、"
 "例えばハードディスク内のすべてのデータを失うといったことが起こります。"
 
 #. Tag: title
-#: install-methods.xml:263
+#: install-methods.xml:265
 #, no-c-format
 msgid "Preparing a USB stick using a hybrid CD/DVD image"
 msgstr "ハイブリッド CD/DVD イメージを使った USB メモリの準備"
 
 #. Tag: para
-#: install-methods.xml:264
-#, no-c-format
+#: install-methods.xml:266
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Debian installation images can now be written directly to a USB stick, "
+#| "which is a very easy way to make a bootable USB stick. Simply choose an "
+#| "image (such as the netinst, CD, DVD-1, or netboot) that will fit on your "
+#| "USB stick. See <xref linkend=\"official-cdrom\"/> to get an installation "
+#| "image."
 msgid ""
-"Debian installation images can now be written directly to a USB stick, which "
-"is a very easy way to make a bootable USB stick. Simply choose an image "
-"(such as the netinst, CD, DVD-1, or netboot) that will fit on your USB "
-"stick. See <xref linkend=\"official-cdrom\"/> to get an installation image."
+"Debian installation images for this architecture are created using the "
+"<command>isohybrid</command> technology; that means they can be written "
+"directly to a USB stick, which is a very easy way to make an installation "
+"media. Simply choose an image (such as the netinst, CD or DVD-1) that will "
+"fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
+"installation image."
 msgstr ""
 "Debian のインストールイメージは直接書き込めるようになり、起動可能な USB メモ"
 "リを作るのがとても簡単になりました。USB メモリに合うイメージ (netinst や CD、"
@@ -389,7 +415,7 @@ msgstr ""
 "<xref linkend=\"official-cdrom\"/> を参照してください。"
 
 #. Tag: para
-#: install-methods.xml:272
+#: install-methods.xml:276
 #, no-c-format
 msgid ""
 "Alternatively, for very small USB sticks, only a few megabytes in size, you "
@@ -403,7 +429,7 @@ msgstr ""
 "す)。"
 
 #. Tag: para
-#: install-methods.xml:279
+#: install-methods.xml:283
 #, no-c-format
 msgid ""
 "The installation image you choose should be written directly to the USB "
@@ -430,7 +456,7 @@ msgstr ""
 "できます。"
 
 #. Tag: para
-#: install-methods.xml:291
+#: install-methods.xml:295
 #, no-c-format
 msgid ""
 "The image must be written to the whole-disk device and not a partition, e."
@@ -442,7 +468,7 @@ msgstr ""
 "<command>unetbootin</command> のようなツールは使わないでください。"
 
 #. Tag: para
-#: install-methods.xml:297
+#: install-methods.xml:301
 #, no-c-format
 msgid ""
 "Simply writing the installation image to USB like this should work fine for "
@@ -454,7 +480,7 @@ msgstr ""
 "けです。"
 
 #. Tag: para
-#: install-methods.xml:305
+#: install-methods.xml:309
 #, no-c-format
 msgid ""
 "The hybrid image on the stick does not occupy all the storage space, so it "
@@ -469,39 +495,37 @@ msgstr ""
 "すべて格納する必要があるときに便利です。"
 
 #. Tag: para
-#: install-methods.xml:313
+#: install-methods.xml:317
 #, no-c-format
 msgid ""
-"Create a second, FAT partition on the stick, mount the partition and copy or "
-"unpack the firmware onto it. For example:"
-msgstr ""
-"USB メモリに ふたつ目の FAT パーティションを作成し、パーティションをマウント"
-"してから、ファームウェアのコピーや展開をそこに行います。以下に例を示します。"
-
-#. Tag: screen
-#: install-methods.xml:318
-#, no-c-format
-msgid ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+"To do so, use cfdisk or any other partitioning tool to create an additional "
+"partition on the stick. Then create a (FAT) filesystem on the partition, "
+"mount it and copy or unpack the firmware onto it, for example with: "
+"<informalexample><screen>\n"
+"# mkdosfs -n FIRMWARE /dev/sdX3\n"
+"# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
 "# cd /mnt\n"
 "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
 "# cd /\n"
-"# umount /mnt"
+"# umount /mnt\n"
+"</screen></informalexample> Take care that you use the correct device name "
+"for your USB stick. The <command>mkdosfs</command> command is contained in "
+"the <classname>dosfstools</classname> &debian; package."
 msgstr ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
-"# cd /mnt\n"
-"# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
-"# cd /\n"
-"# umount /mnt"
 
 #. Tag: para
-#: install-methods.xml:320
-#, no-c-format
+#: install-methods.xml:329
+#, fuzzy, no-c-format
+#| msgid ""
+#| "You might have written the <filename>mini.iso</filename> to the USB "
+#| "stick. In this case the second partition doesn't have to be created as, "
+#| "very nicely, it will already be present. Unplugging and replugging the "
+#| "USB stick should make the two partitions visible."
 msgid ""
-"You might have written the <filename>mini.iso</filename> to the USB stick. "
-"In this case the second partition doesn't have to be created as, very "
-"nicely, it will already be present. Unplugging and replugging the USB stick "
-"should make the two partitions visible."
+"If you have chosen the <filename>mini.iso</filename> to be written to the "
+"USB stick, the second partition doesn't have to be created, as - very nicely "
+"- it will already be present. Unplugging and replugging the USB stick should "
+"make the two partitions visible."
 msgstr ""
 "もしかすると、USB スティックに <filename>mini.iso</filename> を書き込んだかも"
 "しれません。この場合、ふたつ目のパーティションを作成する必要はなく、都合のい"
@@ -509,19 +533,36 @@ msgstr ""
 "ションが見えるはずです。"
 
 #. Tag: title
-#: install-methods.xml:334
+#: install-methods.xml:343
 #, no-c-format
 msgid "Manually copying files to the USB stick"
 msgstr "USB メモリへのファイルの手動コピー"
 
 #. Tag: para
-#: install-methods.xml:335
+#: install-methods.xml:344
 #, no-c-format
 msgid ""
-"An alternative way to set up your USB stick is to manually copy the "
-"installer files, and also an installation image to it. Note that the USB "
-"stick should be at least 1 GB in size (smaller setups are possible if you "
-"follow <xref linkend=\"usb-copy-flexible\"/>)."
+"Prior to isohybrid technology being used for &debian; installation images, "
+"the methods documented in the chapters below were used to prepare media for "
+"booting from USB devices. These have been superseded by the technique in "
+"<xref linkend=\"usb-copy-isohybrid\"/>, but have been left here for "
+"educational and historical purposes and in case they are useful to some user."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:353
+#, fuzzy, no-c-format
+#| msgid ""
+#| "An alternative way to set up your USB stick is to manually copy the "
+#| "installer files, and also an installation image to it. Note that the USB "
+#| "stick should be at least 1 GB in size (smaller setups are possible if you "
+#| "follow <xref linkend=\"usb-copy-flexible\"/>)."
+msgid ""
+"An alternative to the method described in <xref linkend=\"usb-copy-isohybrid"
+"\"/> is to manually copy the installer files, and also an installation image "
+"to the stick. Note that the USB stick should be at least 1 GB in size "
+"(smaller setups are possible using the files from netboot, following <xref "
+"linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 "USB メモリを設定するもう一つの方法は、インストーラのファイルとインストールイ"
 "メージを手動で書き込むやり方です。USB メモリは少なくとも 1 GB のサイズが必要"
@@ -529,13 +570,19 @@ msgstr ""
 "ば、もっと少ないサイズでもセットアップできます)。"
 
 #. Tag: para
-#: install-methods.xml:342
-#, no-c-format
+#: install-methods.xml:362
+#, fuzzy, no-c-format
+#| msgid ""
+#| "There is an all-in-one file &hdmedia-boot-img; which contains all the "
+#| "installer files (including the kernel) <phrase arch=\"x86\">as well as "
+#| "<classname>syslinux</classname> and its configuration file</phrase> "
+#| "<phrase arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+#| "configuration file</phrase>."
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
-"installer files (including the kernel) <phrase arch=\"x86\">as well as "
-"<classname>syslinux</classname> and its configuration file</phrase> <phrase "
-"arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+"installer files (including the kernel)<phrase arch=\"x86\"> as well as "
+"<classname>syslinux</classname> and its configuration file</phrase><phrase "
+"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
 "configuration file</phrase>."
 msgstr ""
 "<phrase arch=\"x86\"><classname>syslinux</classname> や、その設定ファイルと共"
@@ -544,7 +591,7 @@ msgstr ""
 "た &hdmedia-boot-img; というオールインワンなファイルがあります。"
 
 #. Tag: para
-#: install-methods.xml:351
+#: install-methods.xml:371
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -560,19 +607,20 @@ msgstr ""
 "す。"
 
 #. Tag: para
-#: install-methods.xml:359
-#, no-c-format
-msgid "To use this image simply extract it directly to your USB stick:"
+#: install-methods.xml:379
+#, fuzzy, no-c-format
+#| msgid "To use this image simply extract it directly to your USB stick:"
+msgid "Simply extract this image directly to your USB stick:"
 msgstr "このイメージを使用するには、単に USB メモリに直接展開してください。"
 
 #. Tag: screen
-#: install-methods.xml:363
+#: install-methods.xml:383
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:365
+#: install-methods.xml:385
 #, no-c-format
 msgid ""
 "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
@@ -584,14 +632,23 @@ msgstr ""
 "モリに直接展開してください。"
 
 #. Tag: screen
-#: install-methods.xml:371
+#: install-methods.xml:391
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:373
-#, no-c-format
+#: install-methods.xml:393
+#, fuzzy, no-c-format
+#| msgid ""
+#| "After that, mount the USB memory stick <phrase arch="
+#| "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
+#| "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
+#| "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
+#| "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
+#| "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
+#| "image (netinst or full CD/DVD) to it. Unmount the stick "
+#| "(<userinput>umount /mnt</userinput>) and you are done."
 msgid ""
 "After that, mount the USB memory stick <phrase arch="
 "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
@@ -599,8 +656,8 @@ msgid ""
 "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now "
 "have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc"
 "\">an HFS filesystem</phrase> on it, and copy a &debian; ISO image (netinst "
-"or full CD/DVD) to it. Unmount the stick (<userinput>umount /mnt</"
-"userinput>) and you are done."
+"or full CD; see <xref linkend=\"official-cdrom\"/>) to it. Unmount the stick "
+"(<userinput>umount /mnt</userinput>) and you are done."
 msgstr ""
 "その後、<phrase arch=\"x86\">FAT ファイルシステムの </phrase><phrase arch="
 "\"powerpc\">HFS ファイルシステムの </phrase>USB メモリをマウントし<phrase "
@@ -611,13 +668,13 @@ msgstr ""
 "をアンマウント (<userinput>umount /mnt</userinput>) すると完了です。"
 
 #. Tag: title
-#: install-methods.xml:390
+#: install-methods.xml:411
 #, no-c-format
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr "USB メモリへのファイルの手動コピー &mdash; 柔軟な方法"
 
 #. Tag: para
-#: install-methods.xml:391
+#: install-methods.xml:412
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -632,13 +689,13 @@ msgstr ""
 "択肢までもがあるということです。"
 
 #. Tag: title
-#: install-methods.xml:406 install-methods.xml:528
+#: install-methods.xml:427
 #, no-c-format
-msgid "Partitioning the USB stick"
-msgstr "USB メモリのパーティション分割"
+msgid "Partitioning and adding a boot loader"
+msgstr ""
 
 #. Tag: para
-#: install-methods.xml:407
+#: install-methods.xml:428
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -648,19 +705,58 @@ msgstr ""
 "を示します。"
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:433
+#, no-c-format
+msgid ""
+"In order to start the kernel after booting from the USB stick, we will put a "
+"boot loader on the stick. Although any boot loader should work, it's "
+"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
+"partition and can be reconfigured by just editing a text file. Any operating "
+"system which supports the FAT file system can be used to make changes to the "
+"configuration of the boot loader."
+msgstr ""
+"USB メモリからブートしてカーネルを起動するには、USB メモリにブートローダを配"
+"置します。どのブートローダも動作しますが、FAT16 パーティションを使用し、テキ"
+"ストファイルを編集するだけで再設定できるので、<classname>syslinux</"
+"classname> を使用するのが便利です。FAT ファイルシステムをサポートするオペレー"
+"ティングシステムなら、ブートローダの設定を変更するのに利用できます。"
+
+#. Tag: para
+#: install-methods.xml:443
 #, no-c-format
 msgid ""
+"First, you need to install the <classname>syslinux</classname> and "
+"<classname>mtools</classname> packages on your system."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:448
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Since most USB sticks come pre-configured with a single FAT16 partition, "
+#| "you probably won't have to repartition or reformat the stick. If you have "
+#| "to do that anyway, use <command>cfdisk</command> or any other "
+#| "partitioning tool to create a FAT16 partition<footnote> <para> Don't "
+#| "forget to set the <quote>bootable</quote> bootable flag. </para> </"
+#| "footnote>, install an MBR using: <informalexample><screen>\n"
+#| "# install-mbr /dev/<replaceable>sdX</replaceable>\n"
+#| "</screen></informalexample> The <command>install-mbr</command> command is "
+#| "contained in the <classname>mbr</classname> &debian; package. Then create "
+#| "the filesystem using: <informalexample><screen>\n"
+#| "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Take care that you use the correct device "
+#| "name for your USB stick. The <command>mkdosfs</command> command is "
+#| "contained in the <classname>dosfstools</classname> &debian; package."
+msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
 "probably won't have to repartition or reformat the stick. If you have to do "
 "that anyway, use <command>cfdisk</command> or any other partitioning tool to "
-"create a FAT16 partition<footnote> <para> Don't forget to set the "
-"<quote>bootable</quote> bootable flag. </para> </footnote>, install an MBR "
+"create a FAT16 partition now<footnote> <para> Don't forget to activate the "
+"<quote>bootable</quote> flag. </para> </footnote>, and then install an MBR "
 "using: <informalexample><screen>\n"
-"# install-mbr /dev/<replaceable>sdX</replaceable>\n"
-"</screen></informalexample> The <command>install-mbr</command> command is "
-"contained in the <classname>mbr</classname> &debian; package. Then create "
-"the filesystem using: <informalexample><screen>\n"
+"# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
+"</screen></informalexample> Now create the filesystem using: "
+"<informalexample><screen>\n"
 "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Take care that you use the correct device name "
 "for your USB stick. The <command>mkdosfs</command> command is contained in "
@@ -683,29 +779,22 @@ msgstr ""
 "&debian; パッケージに含まれています。"
 
 #. Tag: para
-#: install-methods.xml:436
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. Although any boot loader should work, it's "
-"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
-"partition and can be reconfigured by just editing a text file. Any operating "
-"system which supports the FAT file system can be used to make changes to the "
-"configuration of the boot loader."
-msgstr ""
-"USB メモリからブートしてカーネルを起動するには、USB メモリにブートローダを配"
-"置します。どのブートローダも動作しますが、FAT16 パーティションを使用し、テキ"
-"ストファイルを編集するだけで再設定できるので、<classname>syslinux</"
-"classname> を使用するのが便利です。FAT ファイルシステムをサポートするオペレー"
-"ティングシステムなら、ブートローダの設定を変更するのに利用できます。"
-
-#. Tag: para
-#: install-methods.xml:446
-#, no-c-format
-msgid ""
-"To put <classname>syslinux</classname> on the FAT16 partition on your USB "
-"stick, install the <classname>syslinux</classname> and <classname>mtools</"
-"classname> packages on your system, and do: <informalexample><screen>\n"
+#: install-methods.xml:471
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
+#| "stick, install the <classname>syslinux</classname> and <classname>mtools</"
+#| "classname> packages on your system, and do: <informalexample><screen>\n"
+#| "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Again, take care that you use the correct "
+#| "device name. The partition must not be mounted when starting "
+#| "<command>syslinux</command>. This procedure writes a boot sector to the "
+#| "partition and creates the file <filename>ldlinux.sys</filename> which "
+#| "contains the boot loader code."
+msgid ""
+"Having a correctly partitioned USB stick (now), you need to put "
+"<classname>syslinux</classname> on the FAT16 partition with: "
+"<informalexample><screen>\n"
 "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Again, take care that you use the correct device "
 "name. The partition must not be mounted when starting <command>syslinux</"
@@ -725,25 +814,47 @@ msgstr ""
 "を作成します。"
 
 #. Tag: title
-#: install-methods.xml:463 install-methods.xml:575
-#, no-c-format
-msgid "Adding the installer image"
+#: install-methods.xml:487
+#, fuzzy, no-c-format
+#| msgid "Adding the installer image"
+msgid "Adding the installer files"
 msgstr "インストーライメージの追加"
 
 #. Tag: para
-#: install-methods.xml:464
+#: install-methods.xml:488
 #, no-c-format
 msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick: "
-"<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
-"<filename>linux</filename> (kernel binary) </para></listitem> "
-"<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
-"para></listitem> </itemizedlist> You can choose between either the text-"
-"based or the graphical version of the installer. The latter can be found in "
-"the <filename>gtk</filename> subdirectory. If you want to rename the files, "
-"please note that <classname>syslinux</classname> can only process DOS (8.3) "
-"file names."
+"There are two different installation variants to choose here: The hd-media "
+"variant needs an installation ISO file on the stick, to load installer "
+"modules and the base system from. The netboot installer however will load "
+"all that from a &debian; mirror."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:495
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick: <itemizedlist> <listitem><para> <filename>vmlinuz</"
+#| "filename> or <filename>linux</filename> (kernel binary) </para></"
+#| "listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+#| "ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+#| "either the text-based or the graphical version of the installer. The "
+#| "latter can be found in the <filename>gtk</filename> subdirectory. If you "
+#| "want to rename the files, please note that <classname>syslinux</"
+#| "classname> can only process DOS (8.3) file names."
+msgid ""
+"According to your choice, you have to download some installer files from the "
+"hd-media or netboot subdirectory of <ulink url=\"&url-debian-installer;images"
+"\">debian/dists/&releasename;/main/installer-&architecture;/current/images/</"
+"ulink> on any &debian; mirror: <itemizedlist> <listitem><para> "
+"<filename>vmlinuz</filename> or <filename>linux</filename> (kernel binary) </"
+"para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+"ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+"either the text-based version of the installer (the files can be found "
+"directly in hd-media or netboot) or the graphical version (look in the "
+"respective <filename>gtk</filename> subdirectories)."
 msgstr ""
 "このパーティションをマウントし (<userinput>mount /dev/<replaceable>sdX1</"
 "replaceable> /mnt</userinput>)、以下のインストーライメージファイルを USB メモ"
@@ -756,17 +867,43 @@ msgstr ""
 "DOS (8.3) のファイル名しか処理できないことに注意してください。"
 
 #. Tag: para
-#: install-methods.xml:488
-#, no-c-format
+#: install-methods.xml:519
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick:"
 msgid ""
-"Next you should create a <filename>syslinux.cfg</filename> configuration "
-"file, which at a bare minimum should contain the following line (change the "
-"name of the kernel binary to <quote><filename>linux</filename></quote> if "
-"you used a <filename>netboot</filename> image): <informalexample><screen>\n"
+"Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+"replaceable> /mnt</userinput>) and copy the downloaded files to the root "
+"directory of the stick."
+msgstr ""
+"このパーティションをマウントし (<userinput>mount /dev/<replaceable>sdX2</"
+"replaceable> /mnt</userinput>)、以下のインストーライメージファイルを USB メモ"
+"リへコピーしてください。"
+
+#. Tag: para
+#: install-methods.xml:525
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Next you should create a <filename>syslinux.cfg</filename> configuration "
+#| "file, which at a bare minimum should contain the following line (change "
+#| "the name of the kernel binary to <quote><filename>linux</filename></"
+#| "quote> if you used a <filename>netboot</filename> image): "
+#| "<informalexample><screen>\n"
+#| "default vmlinuz initrd=initrd.gz\n"
+#| "</screen></informalexample> For the graphical installer you should add "
+#| "<userinput>vga=788</userinput> to the line. Other parameters can be "
+#| "appended as desired."
+msgid ""
+"Next you should create a text file named <filename>syslinux.cfg</filename> "
+"in the root directory of the stick as configuration file for syslinux, which "
+"at a bare minimum should contain the following line: "
+"<informalexample><screen>\n"
 "default vmlinuz initrd=initrd.gz\n"
-"</screen></informalexample> For the graphical installer you should add "
-"<userinput>vga=788</userinput> to the line. Other parameters can be appended "
-"as desired."
+"</screen></informalexample> Change the name of the kernel binary to "
+"<quote><filename>linux</filename></quote> if you used files from "
+"<filename>netboot</filename>."
 msgstr ""
 "次に、<filename>syslinux.cfg</filename> 設定ファイルを作成します。最低限必要"
 "なのは以下の行です (<filename>netboot</filename> を使用している場合、カーネル"
@@ -778,7 +915,16 @@ msgstr ""
 "みで付加できます。"
 
 #. Tag: para
-#: install-methods.xml:500
+#: install-methods.xml:536
+#, no-c-format
+msgid ""
+"For the graphical installer (from <filename>gtk</filename>) you should add "
+"<userinput>vga=788</userinput> at the end of the line. Other parameters can "
+"be appended as desired."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:542
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -788,16 +934,30 @@ msgstr ""
 "<userinput>prompt 1</userinput> の行を追加してください。"
 
 #. Tag: para
-#: install-methods.xml:505
+#: install-methods.xml:547
 #, no-c-format
 msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/>). Be "
-"sure to select one that fits. Note that the <quote>netboot <filename>mini."
-"iso</filename></quote> image is not usable for this purpose. </para> </"
-"footnote> onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
+"If you used files from <filename>hd-media</filename>, you should now copy "
+"the ISO file of a &debian; installation image onto the stick. (For the "
+"<filename>netboot</filename> variant this is not needed.)"
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:553
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you used an <filename>hd-media</filename> image, you should now copy "
+#| "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
+#| "a netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/"
+#| ">). Be sure to select one that fits. Note that the <quote>netboot "
+#| "<filename>mini.iso</filename></quote> image is not usable for this "
+#| "purpose. </para> </footnote> onto the stick. When you are done, unmount "
+#| "the USB memory stick (<userinput>umount /mnt</userinput>)."
+msgid ""
+"You can use either a netinst or a full CD/DVD image (see <xref linkend="
+"\"official-cdrom\"/>). Be sure to select one that fits on your stick. Note "
+"that the <quote>netboot <filename>mini.iso</filename></quote> image is not "
+"usable for this purpose."
 msgstr ""
 "<filename>hd-media</filename> イメージを使用している場合、ここで &debian; の "
 "ISO イメージのファイル<footnote><para>netinst かフル CD/DVD イメージのいずれ"
@@ -808,7 +968,21 @@ msgstr ""
 "さい (<userinput>umount /mnt</userinput>)。"
 
 #. Tag: para
-#: install-methods.xml:529
+#: install-methods.xml:560
+#, no-c-format
+msgid ""
+"When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+"userinput>)."
+msgstr ""
+
+#. Tag: title
+#: install-methods.xml:573
+#, no-c-format
+msgid "Partitioning the USB stick"
+msgstr "USB メモリのパーティション分割"
+
+#. Tag: para
+#: install-methods.xml:574
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -837,7 +1011,7 @@ msgstr ""
 "classname> &debian; パッケージに含まれています。"
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:591
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -853,7 +1027,7 @@ msgstr ""
 "す。"
 
 #. Tag: para
-#: install-methods.xml:555
+#: install-methods.xml:600
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -887,8 +1061,14 @@ msgstr ""
 "ように HFS ユーティリティを使って印を付けます。これが終われば、USB メモリに通"
 "常の Unix ユーティリティを使う準備ができたことになります。"
 
+#. Tag: title
+#: install-methods.xml:620
+#, no-c-format
+msgid "Adding the installer image"
+msgstr "インストーライメージの追加"
+
 #. Tag: para
-#: install-methods.xml:576
+#: install-methods.xml:621
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
@@ -899,31 +1079,31 @@ msgstr ""
 "リへコピーしてください。"
 
 #. Tag: para
-#: install-methods.xml:583
+#: install-methods.xml:628
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (カーネルバイナリ)"
 
 #. Tag: para
-#: install-methods.xml:588
+#: install-methods.xml:633
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (初期 RAM ディスクイメージ)"
 
 #. Tag: para
-#: install-methods.xml:593
+#: install-methods.xml:638
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (yaboot 設定ファイル)"
 
 #. Tag: para
-#: install-methods.xml:598
+#: install-methods.xml:643
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (追加起動メッセージ)"
 
 #. Tag: para
-#: install-methods.xml:605
+#: install-methods.xml:650
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -958,7 +1138,7 @@ msgstr ""
 "size</userinput> パラメータを、 増やす必要があることに注意してください。"
 
 #. Tag: para
-#: install-methods.xml:615
+#: install-methods.xml:660
 #, no-c-format
 msgid ""
 "If you used an <filename>hd-media</filename> image, you should now copy the "
@@ -978,13 +1158,13 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>)。"
 
 #. Tag: title
-#: install-methods.xml:643
+#: install-methods.xml:688
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "ハードディスク起動ファイルの準備"
 
 #. Tag: para
-#: install-methods.xml:644
+#: install-methods.xml:689
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -999,7 +1179,7 @@ msgstr ""
 "を直接 UEFI パーティションから起動できます。"
 
 #. Tag: para
-#: install-methods.xml:652
+#: install-methods.xml:697
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1011,7 +1191,7 @@ msgstr ""
 "ディアに関する厄介ごとすべてを避けることができます。"
 
 #. Tag: para
-#: install-methods.xml:658
+#: install-methods.xml:703
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1033,7 +1213,7 @@ msgstr ""
 "たファイル) をやりとりするためには、HFS パーティションが必要です。"
 
 #. Tag: para
-#: install-methods.xml:669
+#: install-methods.xml:714
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1045,14 +1225,14 @@ msgstr ""
 "別々のプログラムを使います。"
 
 #. Tag: title
-#: install-methods.xml:678
+#: install-methods.xml:723
 #, no-c-format
 msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
 msgstr ""
 "<command>GRUB</command> を使用した Linux からのハードディスクインストーラ起動"
 
 #. Tag: para
-#: install-methods.xml:680
+#: install-methods.xml:725
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1062,7 +1242,7 @@ msgstr ""
 "を交換する方法について説明します。"
 
 #. Tag: para
-#: install-methods.xml:686
+#: install-methods.xml:731
 #, no-c-format
 msgid ""
 "At boot time, <command>GRUB</command> supports loading in memory not only "
@@ -1074,7 +1254,7 @@ msgstr ""
 "root ファイルシステムとして使うことができます。"
 
 #. Tag: para
-#: install-methods.xml:692
+#: install-methods.xml:737
 #, no-c-format
 msgid ""
 "Copy the following files from the &debian; archives to a convenient location "
@@ -1085,19 +1265,19 @@ msgstr ""
 "す。"
 
 #. Tag: para
-#: install-methods.xml:699
+#: install-methods.xml:744
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (カーネルバイナリ)"
 
 #. Tag: para
-#: install-methods.xml:704
+#: install-methods.xml:749
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (RAM ディスクイメージ)"
 
 #. Tag: para
-#: install-methods.xml:711
+#: install-methods.xml:756
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1113,7 +1293,7 @@ msgstr ""
 "さい)"
 
 #. Tag: para
-#: install-methods.xml:720
+#: install-methods.xml:765
 #, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1131,7 +1311,7 @@ msgstr ""
 "インストールイメージからインストールできます。"
 
 #. Tag: para
-#: install-methods.xml:728
+#: install-methods.xml:773
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1141,7 +1321,7 @@ msgstr ""
 "ください。"
 
 #. Tag: title
-#: install-methods.xml:738
+#: install-methods.xml:783
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
@@ -1149,7 +1329,7 @@ msgstr ""
 "動"
 
 #. Tag: para
-#: install-methods.xml:739
+#: install-methods.xml:784
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -1159,7 +1339,7 @@ msgstr ""
 "するようハードディスクを準備する方法を説明します。"
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:789
 #, no-c-format
 msgid ""
 "Copy the following directories from a &debian; installation image to "
@@ -1169,7 +1349,7 @@ msgstr ""
 "filename> にコピーしてください。"
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:794
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
@@ -1178,19 +1358,19 @@ msgstr ""
 "メージ)"
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:799
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>/tools</filename> (loadlin ツール)"
 
 #. Tag: title
-#: install-methods.xml:866
+#: install-methods.xml:911
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "TFTP ネットブート用ファイルの準備"
 
 #. Tag: para
-#: install-methods.xml:867
+#: install-methods.xml:912
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1206,7 +1386,7 @@ msgstr ""
 "せん。"
 
 #. Tag: para
-#: install-methods.xml:875
+#: install-methods.xml:920
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1219,7 +1399,7 @@ msgstr ""
 "要です。"
 
 #. Tag: para
-#: install-methods.xml:882
+#: install-methods.xml:927
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1240,7 +1420,7 @@ msgstr ""
 "DHCP でしか設定できないこともあります。"
 
 #. Tag: para
-#: install-methods.xml:896
+#: install-methods.xml:941
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1252,7 +1432,7 @@ msgstr ""
 "あります。"
 
 #. Tag: para
-#: install-methods.xml:902
+#: install-methods.xml:947
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1263,7 +1443,7 @@ msgstr ""
 "す。"
 
 #. Tag: para
-#: install-methods.xml:907
+#: install-methods.xml:952
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1277,7 +1457,7 @@ msgstr ""
 "4.x, SunOS 5.x (Solaris), GNU/Linux での例を示します。"
 
 #. Tag: para
-#: install-methods.xml:915
+#: install-methods.xml:960
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1291,13 +1471,13 @@ msgstr ""
 "です。"
 
 #. Tag: title
-#: install-methods.xml:931
+#: install-methods.xml:976
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "RARP サーバの設定"
 
 #. Tag: para
-#: install-methods.xml:932
+#: install-methods.xml:977
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1315,7 +1495,7 @@ msgstr ""
 "eth0</userinput> コマンドを使ってください。"
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1339,13 +1519,13 @@ msgstr ""
 "rarpd -a</userinput> を (ルート権限で) 実行してください。"
 
 #. Tag: title
-#: install-methods.xml:965
+#: install-methods.xml:1010
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "DHCP サーバの設定"
 
 #. Tag: para
-#: install-methods.xml:966
+#: install-methods.xml:1011
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1359,7 +1539,7 @@ msgstr ""
 "dhcpd.conf</filename> を参照)"
 
 #. Tag: screen
-#: install-methods.xml:973
+#: install-methods.xml:1018
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1403,7 +1583,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:975
+#: install-methods.xml:1020
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1420,7 +1600,7 @@ msgstr ""
 "ションは TFTP 経由で取得するファイルの名前です。"
 
 #. Tag: para
-#: install-methods.xml:985
+#: install-methods.xml:1030
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1431,13 +1611,13 @@ msgstr ""
 "動してください。"
 
 #. Tag: title
-#: install-methods.xml:993
+#: install-methods.xml:1038
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "DHCP 設定での PXE 起動の有効化"
 
 #. Tag: para
-#: install-methods.xml:994
+#: install-methods.xml:1039
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1508,7 +1688,7 @@ msgstr ""
 "い)。"
 
 #. Tag: para
-#: install-methods.xml:1004
+#: install-methods.xml:1049
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1518,7 +1698,7 @@ msgstr ""
 "たブートローダーを指定する必要があります"
 
 #. Tag: screen
-#: install-methods.xml:1008
+#: install-methods.xml:1053
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1540,13 +1720,13 @@ msgstr ""
 "}"
 
 #. Tag: title
-#: install-methods.xml:1021
+#: install-methods.xml:1066
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "BOOTP サーバの設定"
 
 #. Tag: para
-#: install-methods.xml:1022
+#: install-methods.xml:1067
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1562,7 +1742,7 @@ msgstr ""
 "れぞれ入っています。"
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:1075
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1626,7 +1806,7 @@ msgstr ""
 "userinput> 変数がマシンの MAC アドレスです。 </phrase>"
 
 #. Tag: para
-#: install-methods.xml:1063
+#: install-methods.xml:1108
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1650,13 +1830,13 @@ msgstr ""
 "<command>dhcpd</command> を再起動するだけです。"
 
 #. Tag: title
-#: install-methods.xml:1082
+#: install-methods.xml:1127
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "TFTP サーバの立ち上げ"
 
 #. Tag: para
-#: install-methods.xml:1083
+#: install-methods.xml:1128
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1666,7 +1846,7 @@ msgstr ""
 "を確認してください。"
 
 #. Tag: para
-#: install-methods.xml:1088
+#: install-methods.xml:1133
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1681,7 +1861,7 @@ msgstr ""
 "は、パッケージのインストール時や再設定時に選択できます。"
 
 #. Tag: para
-#: install-methods.xml:1097
+#: install-methods.xml:1142
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1699,7 +1879,7 @@ msgstr ""
 "要に応じて、本節の設定例を調整してください。"
 
 #. Tag: para
-#: install-methods.xml:1107
+#: install-methods.xml:1152
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1715,7 +1895,7 @@ msgstr ""
 "勧めします。"
 
 #. Tag: para
-#: install-methods.xml:1115
+#: install-methods.xml:1160
 #, no-c-format
 msgid ""
 "If you intend to install &debian; on an SGI machine and your TFTP server is "
@@ -1745,13 +1925,13 @@ msgstr ""
 "調整してください。"
 
 #. Tag: title
-#: install-methods.xml:1137
+#: install-methods.xml:1182
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "TFTP イメージを適切な場所に配置する"
 
 #. Tag: para
-#: install-methods.xml:1138
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1767,7 +1947,7 @@ msgstr ""
 "TFTP クライアントによって決まり、 強制力のある標準は存在しません。"
 
 #. Tag: para
-#: install-methods.xml:1147
+#: install-methods.xml:1192
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -1783,37 +1963,37 @@ msgstr ""
 "す。"
 
 #. Tag: filename
-#: install-methods.xml:1158
+#: install-methods.xml:1203
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1163
+#: install-methods.xml:1208
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1168
+#: install-methods.xml:1213
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1173
+#: install-methods.xml:1218
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: filename
-#: install-methods.xml:1178
+#: install-methods.xml:1223
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1228
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1833,7 +2013,7 @@ msgstr ""
 "な EFI ブートイメージ名を渡す必要があります。"
 
 #. Tag: para
-#: install-methods.xml:1193
+#: install-methods.xml:1238
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1850,13 +2030,13 @@ msgstr ""
 "を確認してください。"
 
 #. Tag: title
-#: install-methods.xml:1205
+#: install-methods.xml:1250
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "SPARC TFTP ブート"
 
 #. Tag: para
-#: install-methods.xml:1206
+#: install-methods.xml:1251
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -1886,7 +2066,7 @@ msgstr ""
 "字に変更し、 (必要なら) サブアーキテクチャ名を追加しなければなりません。"
 
 #. Tag: para
-#: install-methods.xml:1222
+#: install-methods.xml:1267
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -1900,7 +2080,7 @@ msgstr ""
 "い。"
 
 #. Tag: para
-#: install-methods.xml:1229
+#: install-methods.xml:1274
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -1914,13 +2094,13 @@ msgstr ""
 "しても TFTP サーバが見るディレクトリの内部でなければいけません。"
 
 #. Tag: title
-#: install-methods.xml:1240
+#: install-methods.xml:1285
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "SGI の TFTP での起動"
 
 #. Tag: para
-#: install-methods.xml:1241
+#: install-methods.xml:1286
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -1934,13 +2114,13 @@ msgstr ""
 "filename> の <userinput>filename=</userinput> オプションに指定します。"
 
 #. Tag: title
-#: install-methods.xml:1349
+#: install-methods.xml:1394
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "自動インストール"
 
 #. Tag: para
-#: install-methods.xml:1350
+#: install-methods.xml:1395
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -1955,13 +2135,13 @@ msgstr ""
 "<ulink url=\"http://fai-project.org\">FAI home page</ulink> をご覧ください。"
 
 #. Tag: title
-#: install-methods.xml:1362
+#: install-methods.xml:1407
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "&debian; インストーラを用いた自動インストール"
 
 #. Tag: para
-#: install-methods.xml:1363
+#: install-methods.xml:1408
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -1975,7 +2155,7 @@ msgstr ""
 "れます。"
 
 #. Tag: para
-#: install-methods.xml:1370
+#: install-methods.xml:1415
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -1985,13 +2165,13 @@ msgstr ""
 "\"appendix-preseed\"/> にあります。"
 
 #. Tag: title
-#: install-methods.xml:1384
+#: install-methods.xml:1429
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr "インストールファイルの整合性の検証"
 
 #. Tag: para
-#: install-methods.xml:1386
+#: install-methods.xml:1431
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -2005,7 +2185,7 @@ msgstr ""
 "トールイメージ自体と同じ場所にあります。次の場所を見てください。"
 
 #. Tag: para
-#: install-methods.xml:1397
+#: install-methods.xml:1442
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2015,7 +2195,7 @@ msgstr ""
 "cd/\">CD イメージのチェックサムファイル</ulink>、"
 
 #. Tag: para
-#: install-methods.xml:1403
+#: install-methods.xml:1448
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2025,7 +2205,7 @@ msgstr ""
 "dvd/\">DVD イメージのチェックサムファイル</ulink>、"
 
 #. Tag: para
-#: install-methods.xml:1409
+#: install-methods.xml:1454
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2035,7 +2215,7 @@ msgstr ""
 "bd/\">BD イメージのチェックサムファイル</ulink>、"
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1460
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -2047,7 +2227,7 @@ msgstr ""
 "サムファイル</ulink>。"
 
 #. Tag: para
-#: install-methods.xml:1423
+#: install-methods.xml:1468
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -2069,7 +2249,7 @@ msgstr ""
 "filename> で比較してください。"
 
 #. Tag: para
-#: install-methods.xml:1436
+#: install-methods.xml:1481
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -2086,6 +2266,27 @@ msgstr ""
 "検証方法もあります。"
 
 #~ msgid ""
+#~ "Create a second, FAT partition on the stick, mount the partition and copy "
+#~ "or unpack the firmware onto it. For example:"
+#~ msgstr ""
+#~ "USB メモリに ふたつ目の FAT パーティションを作成し、パーティションをマウン"
+#~ "トしてから、ファームウェアのコピーや展開をそこに行います。以下に例を示しま"
+#~ "す。"
+
+#~ msgid ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+#~ msgstr ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+
+#~ msgid ""
 #~ "Hard disk installer booting from Linux using <command>LILO</command> or "
 #~ "<command>GRUB</command>"
 #~ msgstr ""