[SILENT_COMMIT] Update of POT and PO files for the manual

1 files changed, 493 insertions, 324 deletions

diff --git a/po/hu/using-d-i.po b/po/hu/using-d-i.po
index 0192e9849..1ee963e80 100644
--- a/po/hu/using-d-i.po
+++ b/po/hu/using-d-i.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2008-09-28 00:09+0000\n"
+"POT-Creation-Date: 2008-10-05 00:05+0000\n"
 "PO-Revision-Date: 2007-03-14 08:35+0100\n"
 "Last-Translator: SZERVÁC Attila <sas@321.hu>\n"
 "Language-Team: Hungarian\n"
@@ -755,14 +755,25 @@ msgstr ""
 "keresi (például CD-ROM vagy hálózati kártya). Mivel még nem minden meghajtó "
 "érhető el, a hardver-felismerés későbbi megismétlése szükséges."
 
+#. Tag: para
+#: using-d-i.xml:429
+#, no-c-format
+msgid ""
+"During hardware detection &d-i; checks if any of the drivers for the "
+"hardware devices in your system require firmware to be loaded. If any "
+"firmware is requested but unavailable, a dialog will be displayed that "
+"allows the missing firmware to be loaded from a removable medium. See <xref "
+"linkend=\"loading-firmware\"/> for further details."
+msgstr ""
+
 #. Tag: title
-#: using-d-i.xml:436
+#: using-d-i.xml:444
 #, no-c-format
 msgid "Check available memory / low memory mode"
 msgstr "Elérhető memória ellenőrzése / alacsony memória mód"
 
 #. Tag: para
-#: using-d-i.xml:438
+#: using-d-i.xml:446
 #, no-c-format
 msgid ""
 "One of the first things &d-i; does, is to check available memory. If the "
@@ -775,7 +786,7 @@ msgstr ""
 "jól megy még így is lehetővé teszi a &debian; telepítését e gépen."
 
 #. Tag: para
-#: using-d-i.xml:445
+#: using-d-i.xml:453
 #, no-c-format
 msgid ""
 "The first measure taken to reduce memory consumption by the installer is to "
@@ -788,7 +799,7 @@ msgstr ""
 "egyszerűen beállítható a saját nyelv."
 
 #. Tag: para
-#: using-d-i.xml:452
+#: using-d-i.xml:460
 #, no-c-format
 msgid ""
 "If that is not sufficient, the installer will further reduce memory "
@@ -804,7 +815,7 @@ msgstr ""
 "hibát adhat."
 
 #. Tag: para
-#: using-d-i.xml:461
+#: using-d-i.xml:469
 #, no-c-format
 msgid ""
 "If the installer runs in low memory mode, it is recommended to create a "
@@ -823,7 +834,7 @@ msgstr ""
 "nagy lemez-terheléshez vezet."
 
 #. Tag: para
-#: using-d-i.xml:471
+#: using-d-i.xml:479
 #, no-c-format
 msgid ""
 "Despite these measures, it is still possible that your system freezes, that "
@@ -837,7 +848,7 @@ msgstr ""
 "terminálon és a syslog fájlban)."
 
 #. Tag: para
-#: using-d-i.xml:478
+#: using-d-i.xml:486
 #, no-c-format
 msgid ""
 "For example, it has been reported that creating a big ext3 file system fails "
@@ -852,7 +863,7 @@ msgstr ""
 "összetevője). A telepítés után az ext2 ext3 partícióra módosítható."
 
 #. Tag: para
-#: using-d-i.xml:486
+#: using-d-i.xml:494
 #, no-c-format
 msgid ""
 "It is possible to force the installer to use a higher lowmem level than the "
@@ -861,13 +872,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:501
+#: using-d-i.xml:509
 #, no-c-format
 msgid "Selecting Localization Options"
 msgstr "A helyi beállítási lehetőségek kiválasztása"
 
 #. Tag: para
-#: using-d-i.xml:503
+#: using-d-i.xml:511
 #, no-c-format
 msgid ""
 "In most cases the first questions you will be asked concern the selection of "
@@ -881,7 +892,7 @@ msgstr ""
 "beállításokból állnak."
 
 #. Tag: para
-#: using-d-i.xml:510
+#: using-d-i.xml:518
 #, no-c-format
 msgid ""
 "The language you choose will be used for the rest of the installation "
@@ -894,7 +905,7 @@ msgstr ""
 "nyelven, a telepítő az angolt használja."
 
 #. Tag: para
-#: using-d-i.xml:517
+#: using-d-i.xml:525
 #, no-c-format
 msgid ""
 "The selected country will be used later in the installation process to pick "
@@ -908,7 +919,7 @@ msgstr ""
 "kijelölésében."
 
 #. Tag: para
-#: using-d-i.xml:524
+#: using-d-i.xml:532
 #, no-c-format
 msgid ""
 "You will first be asked to select your preferred language. The language "
@@ -930,7 +941,7 @@ msgstr ""
 "kerül telepítésre."
 
 #. Tag: para
-#: using-d-i.xml:536
+#: using-d-i.xml:544
 #, fuzzy, no-c-format
 #| msgid ""
 #| "If you selected a language that is recognized as an official language for "
@@ -959,7 +970,7 @@ msgstr ""
 "társított, ez önműködően kiválasztásra kerül."
 
 #. Tag: para
-#: using-d-i.xml:554
+#: using-d-i.xml:562
 #, no-c-format
 msgid ""
 "If the language has only one country associated with it, that country will "
@@ -970,7 +981,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:562
+#: using-d-i.xml:570
 #, no-c-format
 msgid ""
 "A default locale will be selected based on the selected language and "
@@ -984,13 +995,13 @@ msgstr ""
 "rendszeren."
 
 #. Tag: title
-#: using-d-i.xml:577
+#: using-d-i.xml:585
 #, no-c-format
 msgid "Choosing a Keyboard"
 msgstr "Billentyűzet választása"
 
 #. Tag: para
-#: using-d-i.xml:579
+#: using-d-i.xml:587
 #, no-c-format
 msgid ""
 "Keyboards are often tailored to the characters used in a language. Select a "
@@ -1006,7 +1017,7 @@ msgstr ""
 "<command>kbdconfig</command> parancsot rendszergazdaként)."
 
 #. Tag: para
-#: using-d-i.xml:589
+#: using-d-i.xml:597
 #, no-c-format
 msgid ""
 "Move the highlight to the keyboard selection you desire and press "
@@ -1022,7 +1033,7 @@ msgstr ""
 "keycap> és <keycap>F10</keycap> közti billentyűk is vannak a legfelső sorban."
 
 #. Tag: para
-#: using-d-i.xml:598
+#: using-d-i.xml:606
 #, no-c-format
 msgid ""
 "There are two keyboard layouts for US keyboards; the qwerty/mac-usb-us "
@@ -1041,13 +1052,13 @@ msgstr ""
 "Amúgy a 2 kiosztás egyezik."
 
 #. Tag: title
-#: using-d-i.xml:628
+#: using-d-i.xml:636
 #, no-c-format
 msgid "Looking for the Debian Installer ISO Image"
 msgstr "A Debian Telepítő ISO kép keresése"
 
 #. Tag: para
-#: using-d-i.xml:629
+#: using-d-i.xml:637
 #, no-c-format
 msgid ""
 "When installing via the <emphasis>hd-media</emphasis> method, there will be "
@@ -1061,7 +1072,7 @@ msgstr ""
 "összetevő pontosan ezt biztosítja."
 
 #. Tag: para
-#: using-d-i.xml:636
+#: using-d-i.xml:644
 #, no-c-format
 msgid ""
 "At first, <command>iso-scan</command> automatically mounts all block devices "
@@ -1090,7 +1101,7 @@ msgstr ""
 "képet keres."
 
 #. Tag: para
-#: using-d-i.xml:653
+#: using-d-i.xml:661
 #, no-c-format
 msgid ""
 "In case the previous attempt to find an installer iso image fails, "
@@ -1102,7 +1113,7 @@ msgstr ""
 "végezzen-e átfogóbb keresést. Ekkor az egész fájlrendszert átnézi."
 
 #. Tag: para
-#: using-d-i.xml:660
+#: using-d-i.xml:668
 #, no-c-format
 msgid ""
 "If <command>iso-scan</command> does not discover your installer iso image, "
@@ -1119,13 +1130,13 @@ msgstr ""
 "indítanak újra, hanem megnézik a 2. konzolon."
 
 #. Tag: title
-#: using-d-i.xml:681
+#: using-d-i.xml:689
 #, fuzzy, no-c-format
 msgid "Configuring the Network"
 msgstr "Hálózat beállítása"
 
 #. Tag: para
-#: using-d-i.xml:683
+#: using-d-i.xml:691
 #, no-c-format
 msgid ""
 "As you enter this step, if the system detects that you have more than one "
@@ -1144,7 +1155,7 @@ msgstr ""
 "citerefentry> kézikönyv oldalt."
 
 #. Tag: para
-#: using-d-i.xml:694
+#: using-d-i.xml:702
 #, no-c-format
 msgid ""
 "By default, &d-i; tries to configure your computer's network automatically "
@@ -1166,7 +1177,7 @@ msgstr ""
 "tudod, hogy ehhez minden működik, próbáld újra."
 
 #. Tag: para
-#: using-d-i.xml:706
+#: using-d-i.xml:714
 #, no-c-format
 msgid ""
 "The manual network setup in turn asks you a number of questions about your "
@@ -1189,7 +1200,7 @@ msgstr ""
 "\"needed-info\"/> szerint."
 
 #. Tag: para
-#: using-d-i.xml:720
+#: using-d-i.xml:728
 #, fuzzy, no-c-format
 msgid ""
 "Some technical details you might, or might not, find handy: the program "
@@ -1210,13 +1221,13 @@ msgstr ""
 "interfaces</filename> szerkesztésével."
 
 #. Tag: title
-#: using-d-i.xml:765
+#: using-d-i.xml:773
 #, no-c-format
 msgid "Configuring the Clock"
 msgstr "Óra beállítása"
 
 #. Tag: para
-#: using-d-i.xml:767
+#: using-d-i.xml:775
 #, no-c-format
 msgid ""
 "The installer will first attempt to connect to a time server on the Internet "
@@ -1228,7 +1239,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:785
+#: using-d-i.xml:793
 #, fuzzy, no-c-format
 msgid ""
 "Depending on the location selected earlier in the installation process, you "
@@ -1241,7 +1252,7 @@ msgstr ""
 "rendszer nem kérdez semmit és ezt az időzónát feltételezi."
 
 #. Tag: para
-#: using-d-i.xml:792
+#: using-d-i.xml:800
 #, no-c-format
 msgid ""
 "If for some reason you wish to set a time zone for the installed system that "
@@ -1250,7 +1261,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:803
+#: using-d-i.xml:811
 #, no-c-format
 msgid ""
 "The simplest option is to just select a different timezone after the "
@@ -1259,13 +1270,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: using-d-i.xml:809
+#: using-d-i.xml:817
 #, no-c-format
 msgid "# dpkg-reconfigure tzdata"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:815
+#: using-d-i.xml:823
 #, no-c-format
 msgid ""
 "Alternatively, the time zone can be set at the very start of the "
@@ -1276,20 +1287,20 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:829
+#: using-d-i.xml:837
 #, no-c-format
 msgid ""
 "For automated installations the time zone can also be set using preseeding."
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:842
+#: using-d-i.xml:850
 #, no-c-format
 msgid "Partitioning and Mount Point Selection"
 msgstr "Particionálás és csatolási pont választás"
 
 #. Tag: para
-#: using-d-i.xml:843
+#: using-d-i.xml:851
 #, fuzzy, no-c-format
 msgid ""
 "At this time, after hardware detection has been executed a final time, &d-i; "
@@ -1307,7 +1318,7 @@ msgstr ""
 "LVM vagy RAID eszközök beállítása."
 
 #. Tag: para
-#: using-d-i.xml:864
+#: using-d-i.xml:872
 #, fuzzy, no-c-format
 msgid ""
 "If you are uncomfortable with partitioning, or just want to know more "
@@ -1318,7 +1329,7 @@ msgstr ""
 "linkend=\"partitioning\"/> részt."
 
 #. Tag: para
-#: using-d-i.xml:870
+#: using-d-i.xml:878
 #, no-c-format
 msgid ""
 "If a hard disk has previously used under Solaris, the partitioner may not "
@@ -1339,7 +1350,7 @@ msgstr ""
 "</screen></informalexample> Ez a lemez korábbi adatait elérhetetlenné teszi."
 
 #. Tag: para
-#: using-d-i.xml:883
+#: using-d-i.xml:891
 #, no-c-format
 msgid ""
 "First you will be given the opportunity to automatically partition either an "
@@ -1353,13 +1364,13 @@ msgstr ""
 "<guimenuitem>Kézi</guimenuitem> pontot a menüből."
 
 #. Tag: title
-#: using-d-i.xml:893
+#: using-d-i.xml:901
 #, fuzzy, no-c-format
 msgid "Guided Partitioning"
 msgstr "Particionáló séma"
 
 #. Tag: para
-#: using-d-i.xml:894
+#: using-d-i.xml:902
 #, no-c-format
 msgid ""
 "If you choose guided partitioning, you may have three options: to create "
@@ -1376,14 +1387,14 @@ msgstr ""
 "beállítja a kernel <quote>dm-crypt</quote> támogatást. </para> </footnote>."
 
 #. Tag: para
-#: using-d-i.xml:909
+#: using-d-i.xml:917
 #, no-c-format
 msgid ""
 "The option to use (encrypted) LVM may not be available on all architectures."
 msgstr "Nem minden architektúrán lehetséges (titkosított) LVM használata."
 
 #. Tag: para
-#: using-d-i.xml:914
+#: using-d-i.xml:922
 #, no-c-format
 msgid ""
 "When using LVM or encrypted LVM, the installer will create most partitions "
@@ -1399,7 +1410,7 @@ msgstr ""
 "biztonságát nyújtja."
 
 #. Tag: para
-#: using-d-i.xml:923
+#: using-d-i.xml:931
 #, no-c-format
 msgid ""
 "When using encrypted LVM, the installer will also automatically erase the "
@@ -1414,7 +1425,7 @@ msgstr ""
 "nyomait is törli), de a lemez méretétől függően eltart egy ideig."
 
 #. Tag: para
-#: using-d-i.xml:932
+#: using-d-i.xml:940
 #, no-c-format
 msgid ""
 "If you choose guided partitioning using LVM or encrypted LVM, some changes "
@@ -1431,7 +1442,7 @@ msgstr ""
 "kéri, mielőtt lemezre írná őket."
 
 #. Tag: para
-#: using-d-i.xml:942
+#: using-d-i.xml:950
 #, no-c-format
 msgid ""
 "If you choose guided partitioning (either classic or using (encrypted) LVM) "
@@ -1448,7 +1459,7 @@ msgstr ""
 "mutatott méretek is segíthetnek azonosítani őket."
 
 #. Tag: para
-#: using-d-i.xml:951
+#: using-d-i.xml:959
 #, no-c-format
 msgid ""
 "Any data on the disk you select will eventually be lost, but you will always "
@@ -1464,7 +1475,7 @@ msgstr ""
 "(titkosított) LVM használatakor ez nem lehetséges."
 
 #. Tag: para
-#: using-d-i.xml:959
+#: using-d-i.xml:967
 #, no-c-format
 msgid ""
 "Next, you will be able to choose from the schemes listed in the table below. "
@@ -1481,73 +1492,73 @@ msgstr ""
 "választott sémától függően) az irányított particionálás elvetésre kerül."
 
 #. Tag: entry
-#: using-d-i.xml:975
+#: using-d-i.xml:983
 #, no-c-format
 msgid "Partitioning scheme"
 msgstr "Particionáló séma"
 
 #. Tag: entry
-#: using-d-i.xml:976
+#: using-d-i.xml:984
 #, no-c-format
 msgid "Minimum space"
 msgstr "Minimum hely"
 
 #. Tag: entry
-#: using-d-i.xml:977
+#: using-d-i.xml:985
 #, no-c-format
 msgid "Created partitions"
 msgstr "Létrehozott partíciók"
 
 #. Tag: entry
-#: using-d-i.xml:983
+#: using-d-i.xml:991
 #, no-c-format
 msgid "All files in one partition"
 msgstr "Minden fájl 1 partíción"
 
 #. Tag: entry
-#: using-d-i.xml:984
+#: using-d-i.xml:992
 #, no-c-format
 msgid "600MB"
 msgstr "600 MB"
 
 #. Tag: entry
-#: using-d-i.xml:985
+#: using-d-i.xml:993
 #, no-c-format
 msgid "<filename>/</filename>, swap"
 msgstr "<filename>/</filename>, csere"
 
 #. Tag: entry
-#: using-d-i.xml:987
+#: using-d-i.xml:995
 #, no-c-format
 msgid "Separate /home partition"
 msgstr "Önálló /home partíció"
 
 #. Tag: entry
-#: using-d-i.xml:988
+#: using-d-i.xml:996
 #, no-c-format
 msgid "500MB"
 msgstr "500 MB"
 
 #. Tag: entry
-#: using-d-i.xml:989
+#: using-d-i.xml:997
 #, no-c-format
 msgid "<filename>/</filename>, <filename>/home</filename>, swap"
 msgstr "<filename>/</filename>, <filename>/home</filename>, csere"
 
 #. Tag: entry
-#: using-d-i.xml:993
+#: using-d-i.xml:1001
 #, no-c-format
 msgid "Separate /home, /usr, /var and /tmp partitions"
 msgstr "Önálló /home, /usr, /var és /tmp partíció"
 
 #. Tag: entry
-#: using-d-i.xml:994
+#: using-d-i.xml:1002
 #, no-c-format
 msgid "<entry>1GB</entry>"
 msgstr "<entry>1 GB</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:995
+#: using-d-i.xml:1003
 #, no-c-format
 msgid ""
 "<filename>/</filename>, <filename>/home</filename>, <filename>/usr</"
@@ -1557,7 +1568,7 @@ msgstr ""
 "filename>, <filename>/var</filename>, <filename>/tmp</filename>, csere"
 
 #. Tag: para
-#: using-d-i.xml:1004
+#: using-d-i.xml:1012
 #, no-c-format
 msgid ""
 "If you choose guided partitioning using (encrypted) LVM, the installer will "
@@ -1570,7 +1581,7 @@ msgstr ""
 "partícióval együtt, az LVM partíción belül jön létre."
 
 #. Tag: para
-#: using-d-i.xml:1010
+#: using-d-i.xml:1018
 #, no-c-format
 msgid ""
 "If you choose guided partitioning for your IA-64 system, there will be an "
@@ -1583,7 +1594,7 @@ msgstr ""
 "menüelem is látszik a formázó menüben EFI indító partíció kézi beállítására."
 
 #. Tag: para
-#: using-d-i.xml:1018
+#: using-d-i.xml:1026
 #, no-c-format
 msgid ""
 "If you choose guided partitioning for your Alpha system, an additional, "
@@ -1595,7 +1606,7 @@ msgstr ""
 "számára."
 
 #. Tag: para
-#: using-d-i.xml:1024
+#: using-d-i.xml:1032
 #, no-c-format
 msgid ""
 "After selecting a scheme, the next screen will show your new partition "
@@ -1606,7 +1617,7 @@ msgstr ""
 "táblát, benne a leendő formázási és csatolási információkat."
 
 #. Tag: para
-#: using-d-i.xml:1030
+#: using-d-i.xml:1038
 #, no-c-format
 msgid ""
 "The list of partitions might look like this: <informalexample><screen>\n"
@@ -1656,7 +1667,7 @@ msgstr ""
 "lehetséges változatot mutat."
 
 #. Tag: para
-#: using-d-i.xml:1043
+#: using-d-i.xml:1051
 #, no-c-format
 msgid ""
 "This concludes the guided partitioning. If you are satisfied with the "
@@ -1676,13 +1687,13 @@ msgstr ""
 "alább írt kézi particionálás szerint."
 
 #. Tag: title
-#: using-d-i.xml:1057
+#: using-d-i.xml:1065
 #, fuzzy, no-c-format
 msgid "Manual Partitioning"
 msgstr "Particionáló séma"
 
 #. Tag: para
-#: using-d-i.xml:1058
+#: using-d-i.xml:1066
 #, no-c-format
 msgid ""
 "A similar screen to the one shown just above will be displayed if you choose "
@@ -1697,7 +1708,7 @@ msgstr ""
 "szakasz további részeiben."
 
 #. Tag: para
-#: using-d-i.xml:1066
+#: using-d-i.xml:1074
 #, no-c-format
 msgid ""
 "If you select a pristine disk which has neither partitions nor free space on "
@@ -1711,7 +1722,7 @@ msgstr ""
 "jelenik meg a választott lemezen."
 
 #. Tag: para
-#: using-d-i.xml:1074
+#: using-d-i.xml:1082
 #, no-c-format
 msgid ""
 "If you select some free space, you will have the opportunity to create a new "
@@ -1746,7 +1757,7 @@ msgstr ""
 "<command>partman</command> fő képernyőjéhez."
 
 #. Tag: para
-#: using-d-i.xml:1096
+#: using-d-i.xml:1104
 #, no-c-format
 msgid ""
 "If you decide you want to change something about your partition, simply "
@@ -1767,7 +1778,7 @@ msgstr ""
 "partíció."
 
 #. Tag: para
-#: using-d-i.xml:1107
+#: using-d-i.xml:1115
 #, no-c-format
 msgid ""
 "Be sure to create at least two partitions: one for the <emphasis>root</"
@@ -1782,7 +1793,7 @@ msgstr ""
 "gyökér fájlrendszer csatolására."
 
 #. Tag: para
-#: using-d-i.xml:1115
+#: using-d-i.xml:1123
 #, no-c-format
 msgid ""
 "If you forget to select and format an EFI boot partition, <command>partman</"
@@ -1794,7 +1805,7 @@ msgstr ""
 "meg nem teszed."
 
 #. Tag: para
-#: using-d-i.xml:1121
+#: using-d-i.xml:1129
 #, no-c-format
 msgid ""
 "Capabilities of <command>partman</command> can be extended with installer "
@@ -1810,7 +1821,7 @@ msgstr ""
 "<filename>partman-lvm</filename>)."
 
 #. Tag: para
-#: using-d-i.xml:1129
+#: using-d-i.xml:1137
 #, no-c-format
 msgid ""
 "After you are satisfied with partitioning, select <guimenuitem>Finish "
@@ -1824,13 +1835,13 @@ msgstr ""
 "kért módon történő létrehozásának megerősítését."
 
 #. Tag: title
-#: using-d-i.xml:1157
+#: using-d-i.xml:1165
 #, fuzzy, no-c-format
 msgid "Configuring Multidisk Devices (Software RAID)"
 msgstr "Több-lemezes eszköz beállítása (szoftver RAID)"
 
 #. Tag: para
-#: using-d-i.xml:1158
+#: using-d-i.xml:1166
 #, no-c-format
 msgid ""
 "If you have more than one harddrive<footnote><para> To be honest, you can "
@@ -1849,7 +1860,7 @@ msgstr ""
 "után <firstterm>szoftver RAID</firstterm>)."
 
 #. Tag: para
-#: using-d-i.xml:1172
+#: using-d-i.xml:1180
 #, no-c-format
 msgid ""
 "MD is basically a bunch of partitions located on different disks and "
@@ -1863,7 +1874,7 @@ msgstr ""
 "csatolható, és így tovább)."
 
 #. Tag: para
-#: using-d-i.xml:1180
+#: using-d-i.xml:1188
 #, fuzzy, no-c-format
 #| msgid ""
 #| "What benefits this brings depends on the type of MD device you are "
@@ -1989,98 +2000,98 @@ msgstr ""
 "para></listitem> </varlistentry> </variablelist> Összefoglalva:"
 
 #. Tag: entry
-#: using-d-i.xml:1294
+#: using-d-i.xml:1302
 #, no-c-format
 msgid "Type"
 msgstr "Típus"
 
 #. Tag: entry
-#: using-d-i.xml:1295
+#: using-d-i.xml:1303
 #, no-c-format
 msgid "Minimum Devices"
 msgstr "Legkisebb eszköz-szám"
 
 #. Tag: entry
-#: using-d-i.xml:1296
+#: using-d-i.xml:1304
 #, no-c-format
 msgid "Spare Device"
 msgstr "Tartalék eszköz"
 
 #. Tag: entry
-#: using-d-i.xml:1297
+#: using-d-i.xml:1305
 #, no-c-format
 msgid "Survives disk failure?"
 msgstr "Túlél lemez hibát?"
 
 #. Tag: entry
-#: using-d-i.xml:1298
+#: using-d-i.xml:1306
 #, no-c-format
 msgid "Available Space"
 msgstr "Elérhető hely"
 
 #. Tag: entry
-#: using-d-i.xml:1304
+#: using-d-i.xml:1312
 #, no-c-format
 msgid "RAID0"
 msgstr "RAID0"
 
 #. Tag: entry
-#: using-d-i.xml:1305 using-d-i.xml:1313 using-d-i.xml:1343
+#: using-d-i.xml:1313 using-d-i.xml:1321 using-d-i.xml:1351
 #, no-c-format
 msgid "<entry>2</entry>"
 msgstr "<entry>2</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1306 using-d-i.xml:1307
+#: using-d-i.xml:1314 using-d-i.xml:1315
 #, no-c-format
 msgid "<entry>no</entry>"
 msgstr "<entry>nincs</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1308
+#: using-d-i.xml:1316
 #, no-c-format
 msgid "Size of the smallest partition multiplied by number of devices in RAID"
 msgstr ""
 "A legkisebb partíció mérete szorozva a RAID tömbben lévő eszközök számával"
 
 #. Tag: entry
-#: using-d-i.xml:1312
+#: using-d-i.xml:1320
 #, no-c-format
 msgid "RAID1"
 msgstr "RAID1"
 
 #. Tag: entry
-#: using-d-i.xml:1314 using-d-i.xml:1322 using-d-i.xml:1333 using-d-i.xml:1344
+#: using-d-i.xml:1322 using-d-i.xml:1330 using-d-i.xml:1341 using-d-i.xml:1352
 #, no-c-format
 msgid "optional"
 msgstr "lehet"
 
 #. Tag: entry
-#: using-d-i.xml:1315 using-d-i.xml:1323 using-d-i.xml:1334 using-d-i.xml:1345
+#: using-d-i.xml:1323 using-d-i.xml:1331 using-d-i.xml:1342 using-d-i.xml:1353
 #, no-c-format
 msgid "<entry>yes</entry>"
 msgstr "<entry>igen</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1316
+#: using-d-i.xml:1324
 #, no-c-format
 msgid "Size of the smallest partition in RAID"
 msgstr "A RAID tömbben lévő legkisebb partíció mérete"
 
 #. Tag: entry
-#: using-d-i.xml:1320
+#: using-d-i.xml:1328
 #, no-c-format
 msgid "RAID5"
 msgstr "RAID5"
 
 #. Tag: entry
-#: using-d-i.xml:1321
+#: using-d-i.xml:1329
 #, no-c-format
 msgid "<entry>3</entry>"
 msgstr "<entry>3</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1324
+#: using-d-i.xml:1332
 #, no-c-format
 msgid ""
 "Size of the smallest partition multiplied by (number of devices in RAID "
@@ -2090,21 +2101,21 @@ msgstr ""
 "száma -1"
 
 #. Tag: entry
-#: using-d-i.xml:1331
+#: using-d-i.xml:1339
 #, fuzzy, no-c-format
 #| msgid "RAID0"
 msgid "RAID6"
 msgstr "RAID0"
 
 #. Tag: entry
-#: using-d-i.xml:1332
+#: using-d-i.xml:1340
 #, fuzzy, no-c-format
 #| msgid "<entry>2</entry>"
 msgid "<entry>4</entry>"
 msgstr "<entry>2</entry>"
 
 #. Tag: entry
-#: using-d-i.xml:1335
+#: using-d-i.xml:1343
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Size of the smallest partition multiplied by (number of devices in RAID "
@@ -2117,14 +2128,14 @@ msgstr ""
 "száma -1"
 
 #. Tag: entry
-#: using-d-i.xml:1342
+#: using-d-i.xml:1350
 #, fuzzy, no-c-format
 #| msgid "RAID0"
 msgid "RAID10"
 msgstr "RAID0"
 
 #. Tag: entry
-#: using-d-i.xml:1346
+#: using-d-i.xml:1354
 #, no-c-format
 msgid ""
 "Total of all partitions divided by the number of chunk copies (defaults to "
@@ -2132,7 +2143,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:1353
+#: using-d-i.xml:1361
 #, no-c-format
 msgid ""
 "If you want to know more about Software RAID, have a look at <ulink url="
@@ -2142,7 +2153,7 @@ msgstr ""
 "howto;\">Szoftver RAID HOGYAN</ulink>."
 
 #. Tag: para
-#: using-d-i.xml:1358
+#: using-d-i.xml:1366
 #, no-c-format
 msgid ""
 "To create a MD device, you need to have the desired partitions it should "
@@ -2157,7 +2168,7 @@ msgstr ""
 "fizikai kötet</guimenuitem> </menuchoice> pontot.)"
 
 #. Tag: para
-#: using-d-i.xml:1367
+#: using-d-i.xml:1375
 #, no-c-format
 msgid ""
 "Make sure that the system can be booted with the partitioning scheme you are "
@@ -2170,7 +2181,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:1379
+#: using-d-i.xml:1387
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Support for MD is a relatively new addition to the installer. You may "
@@ -2193,7 +2204,7 @@ msgstr ""
 "megoldhatják."
 
 #. Tag: para
-#: using-d-i.xml:1388
+#: using-d-i.xml:1396
 #, no-c-format
 msgid ""
 "Next, you should choose <guimenuitem>Configure software RAID</guimenuitem> "
@@ -2214,7 +2225,7 @@ msgstr ""
 "következők a választott MD típustól függenek."
 
 #. Tag: para
-#: using-d-i.xml:1401
+#: using-d-i.xml:1409
 #, no-c-format
 msgid ""
 "RAID0 is simple &mdash; you will be issued with the list of available RAID "
@@ -2225,7 +2236,7 @@ msgstr ""
 "listája, és az egyetlen feladat a leendő MD-t alkotó partíciók kijelölése."
 
 #. Tag: para
-#: using-d-i.xml:1408
+#: using-d-i.xml:1416
 #, no-c-format
 msgid ""
 "RAID1 is a bit more tricky. First, you will be asked to enter the number of "
@@ -2242,7 +2253,7 @@ msgstr ""
 "az előbb megadott számmal. Ne aggódj! A &d-i; figyelmeztet hiba esetén."
 
 #. Tag: para
-#: using-d-i.xml:1420
+#: using-d-i.xml:1428
 #, no-c-format
 msgid ""
 "RAID5 has a similar setup procedure as RAID1 with the exception that you "
@@ -2252,7 +2263,7 @@ msgstr ""
 "emphasis> aktív partíciót kell megadni."
 
 #. Tag: para
-#: using-d-i.xml:1426
+#: using-d-i.xml:1434
 #, fuzzy, no-c-format
 #| msgid ""
 #| "RAID5 has a similar setup procedure as RAID1 with the exception that you "
@@ -2265,7 +2276,7 @@ msgstr ""
 "emphasis> aktív partíciót kell megadni."
 
 #. Tag: para
-#: using-d-i.xml:1432
+#: using-d-i.xml:1440
 #, no-c-format
 msgid ""
 "RAID10 again has a similar setup procedure as RAID1 except in expert mode. "
@@ -2278,7 +2289,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:1446
+#: using-d-i.xml:1454
 #, no-c-format
 msgid ""
 "It is perfectly possible to have several types of MD at once. For example, "
@@ -2296,7 +2307,7 @@ msgstr ""
 "partíció)."
 
 #. Tag: para
-#: using-d-i.xml:1455
+#: using-d-i.xml:1463
 #, no-c-format
 msgid ""
 "After you setup MD devices to your liking, you can <guimenuitem>Finish</"
@@ -2310,13 +2321,13 @@ msgstr ""
 "például csatolási pontok társítására."
 
 #. Tag: title
-#: using-d-i.xml:1470
+#: using-d-i.xml:1478
 #, no-c-format
 msgid "Configuring the Logical Volume Manager (LVM)"
 msgstr "Logikai kötet-kezelő (LVM) beállítása"
 
 #. Tag: para
-#: using-d-i.xml:1471
+#: using-d-i.xml:1479
 #, no-c-format
 msgid ""
 "If you are working with computers at the level of system administrator or "
@@ -2332,7 +2343,7 @@ msgstr ""
 "így tovább kellett kezelni."
 
 #. Tag: para
-#: using-d-i.xml:1479
+#: using-d-i.xml:1487
 #, no-c-format
 msgid ""
 "To avoid the described situation you can use Logical Volume Manager (LVM). "
@@ -2351,7 +2362,7 @@ msgstr ""
 "közt is átnyúlhatnak."
 
 #. Tag: para
-#: using-d-i.xml:1489
+#: using-d-i.xml:1497
 #, no-c-format
 msgid ""
 "Now when you realize you need more space for your old 160GB <filename>/home</"
@@ -2372,7 +2383,7 @@ msgstr ""
 "ulink> leírást."
 
 #. Tag: para
-#: using-d-i.xml:1500
+#: using-d-i.xml:1508
 #, no-c-format
 msgid ""
 "LVM setup in &d-i; is quite simple and completely supported inside "
@@ -2389,7 +2400,7 @@ msgstr ""
 "guimenuitem> </menuchoice> pontot."
 
 #. Tag: para
-#: using-d-i.xml:1509
+#: using-d-i.xml:1517
 #, no-c-format
 msgid ""
 "When you return to the main <command>partman</command> screen, you will see "
@@ -2408,7 +2419,7 @@ msgstr ""
 "lehetséges műveleteket mutatja. A lehetséges műveletek:"
 
 #. Tag: para
-#: using-d-i.xml:1520
+#: using-d-i.xml:1528
 #, no-c-format
 msgid ""
 "<guimenuitem>Display configuration details</guimenuitem>: shows LVM device "
@@ -2418,43 +2429,43 @@ msgstr ""
 "eszköz struktúrát, a logikai kötetek neveit, méreteit és egyebeket"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1525
+#: using-d-i.xml:1533
 #, no-c-format
 msgid "Create volume group"
 msgstr "Kötet csoport létrehozása"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1528
+#: using-d-i.xml:1536
 #, no-c-format
 msgid "Create logical volume"
 msgstr "Logikai kötet létrehozása"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1531
+#: using-d-i.xml:1539
 #, no-c-format
 msgid "Delete volume group"
 msgstr "Kötet csoport törlése"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1534
+#: using-d-i.xml:1542
 #, no-c-format
 msgid "Delete logical volume"
 msgstr "Logikai kötet törlése"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1537
+#: using-d-i.xml:1545
 #, no-c-format
 msgid "Extend volume group"
 msgstr "Kötet csoport bővítése"
 
 #. Tag: guimenuitem
-#: using-d-i.xml:1540
+#: using-d-i.xml:1548
 #, no-c-format
 msgid "Reduce volume group"
 msgstr "Kötet csoport csökkentése"
 
 #. Tag: para
-#: using-d-i.xml:1542
+#: using-d-i.xml:1550
 #, no-c-format
 msgid ""
 "<guimenuitem>Finish</guimenuitem>: return to the main <command>partman</"
@@ -2464,7 +2475,7 @@ msgstr ""
 "képernyőhöz"
 
 #. Tag: para
-#: using-d-i.xml:1548
+#: using-d-i.xml:1556
 #, no-c-format
 msgid ""
 "Use the options in that menu to first create a volume group and then create "
@@ -2474,7 +2485,7 @@ msgstr ""
 "kötetek létrehozására."
 
 #. Tag: para
-#: using-d-i.xml:1553
+#: using-d-i.xml:1561
 #, no-c-format
 msgid ""
 "After you return to the main <command>partman</command> screen, any created "
@@ -2486,13 +2497,13 @@ msgstr ""
 "is kezelhetők)."
 
 #. Tag: title
-#: using-d-i.xml:1567
+#: using-d-i.xml:1575
 #, no-c-format
 msgid "Configuring Encrypted Volumes"
 msgstr "Titkosított kötetek beállítása"
 
 #. Tag: para
-#: using-d-i.xml:1568
+#: using-d-i.xml:1576
 #, no-c-format
 msgid ""
 "&d-i; allows you to set up encrypted partitions. Every file you write to "
@@ -2514,7 +2525,7 @@ msgstr ""
 "adatok véletlen karaktereknek tűnnek."
 
 #. Tag: para
-#: using-d-i.xml:1580
+#: using-d-i.xml:1588
 #, no-c-format
 msgid ""
 "The two most important partitions to encrypt are: the home partition, where "
@@ -2542,7 +2553,7 @@ msgstr ""
 "betöltése."
 
 #. Tag: para
-#: using-d-i.xml:1595
+#: using-d-i.xml:1603
 #, no-c-format
 msgid ""
 "Please note that the performance of encrypted partitions will be less than "
@@ -2556,7 +2567,7 @@ msgstr ""
 "hosszán múlik."
 
 #. Tag: para
-#: using-d-i.xml:1602
+#: using-d-i.xml:1610
 #, no-c-format
 msgid ""
 "To use encryption, you have to create a new partition by selecting some free "
@@ -2576,7 +2587,7 @@ msgstr ""
 "módosul és különböző titkosító lehetőségeket ad a partícióhoz."
 
 #. Tag: para
-#: using-d-i.xml:1613
+#: using-d-i.xml:1621
 #, no-c-format
 msgid ""
 "&d-i; supports several encryption methods. The default method is "
@@ -2592,7 +2603,7 @@ msgstr ""
 "ok, ajánlott az alap használata."
 
 #. Tag: para
-#: using-d-i.xml:1625
+#: using-d-i.xml:1633
 #, no-c-format
 msgid ""
 "First, let's have a look at the options available when you select "
@@ -2606,13 +2617,13 @@ msgstr ""
 "lettek kiválasztva."
 
 #. Tag: term
-#: using-d-i.xml:1635
+#: using-d-i.xml:1643
 #, no-c-format
 msgid "Encryption: <userinput>aes</userinput>"
 msgstr "Titkosítás: <userinput>aes</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1637
+#: using-d-i.xml:1645
 #, no-c-format
 msgid ""
 "This option lets you select the encryption algorithm (<firstterm>cipher</"
@@ -2637,13 +2648,13 @@ msgstr ""
 "érzékeny adatok védelmére a XXI. században."
 
 #. Tag: term
-#: using-d-i.xml:1655
+#: using-d-i.xml:1663
 #, no-c-format
 msgid "Key size: <userinput>256</userinput>"
 msgstr "Kulcs méret: <userinput>256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1657
+#: using-d-i.xml:1665
 #, no-c-format
 msgid ""
 "Here you can specify the length of the encryption key. With a larger key "
@@ -2656,13 +2667,13 @@ msgstr ""
 "teljesítményre. Az elérhető kulcs méretek a titkosítástól függenek."
 
 #. Tag: term
-#: using-d-i.xml:1669
+#: using-d-i.xml:1677
 #, no-c-format
 msgid "IV algorithm: <userinput>cbc-essiv:sha256</userinput>"
 msgstr "IV algoritmus: <userinput>cbc-essiv:sha256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1671
+#: using-d-i.xml:1679
 #, no-c-format
 msgid ""
 "The <firstterm>Initialization Vector</firstterm> or <firstterm>IV</"
@@ -2679,7 +2690,7 @@ msgstr ""
 "adatok általi törés megakadályozása."
 
 #. Tag: para
-#: using-d-i.xml:1681
+#: using-d-i.xml:1689
 #, no-c-format
 msgid ""
 "From the provided alternatives, the default <userinput>cbc-essiv:sha256</"
@@ -2693,25 +2704,25 @@ msgstr ""
 "az újabb algoritmusokat."
 
 #. Tag: term
-#: using-d-i.xml:1693
+#: using-d-i.xml:1701
 #, no-c-format
 msgid "Encryption key: <userinput>Passphrase</userinput>"
 msgstr "Titkosító kulcs: <userinput>Jelmondat</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1695
+#: using-d-i.xml:1703
 #, no-c-format
 msgid "Here you can choose the type of the encryption key for this partition."
 msgstr "Itt állítható be a titkosító kulcs e partícióhoz."
 
 #. Tag: term
-#: using-d-i.xml:1701
+#: using-d-i.xml:1709
 #, no-c-format
 msgid "Passphrase"
 msgstr "Jelmondat"
 
 #. Tag: para
-#: using-d-i.xml:1702
+#: using-d-i.xml:1710
 #, no-c-format
 msgid ""
 "The encryption key will be computed<footnote> <para> Using a passphrase as "
@@ -2725,13 +2736,13 @@ msgstr ""
 "alapján, mely e folyamat folyatásában adható meg."
 
 #. Tag: term
-#: using-d-i.xml:1717 using-d-i.xml:1810
+#: using-d-i.xml:1725 using-d-i.xml:1818
 #, no-c-format
 msgid "Random key"
 msgstr "Véletlen kulcs"
 
 #. Tag: para
-#: using-d-i.xml:1718
+#: using-d-i.xml:1726
 #, no-c-format
 msgid ""
 "A new encryption key will be generated from random data each time you try to "
@@ -2748,7 +2759,7 @@ msgstr ""
 "algoritmus ismeretlen gyengesége nélkül ez nem lehetséges a mi életünkben.)"
 
 #. Tag: para
-#: using-d-i.xml:1727
+#: using-d-i.xml:1735
 #, no-c-format
 msgid ""
 "Random keys are useful for swap partitions because you do not need to bother "
@@ -2767,13 +2778,13 @@ msgstr ""
 "partícióra a felfüggesztéskor írt adatok visszaállítása."
 
 #. Tag: term
-#: using-d-i.xml:1746 using-d-i.xml:1823
+#: using-d-i.xml:1754 using-d-i.xml:1831
 #, no-c-format
 msgid "Erase data: <userinput>yes</userinput>"
 msgstr "Adatok törlése: <userinput>igen</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1748
+#: using-d-i.xml:1756
 #, no-c-format
 msgid ""
 "Determines whether the content of this partition should be overwritten with "
@@ -2793,7 +2804,7 @@ msgstr ""
 "felülírás után. </para></footnote>."
 
 #. Tag: para
-#: using-d-i.xml:1768
+#: using-d-i.xml:1776
 #, no-c-format
 msgid ""
 "If you select <menuchoice> <guimenu>Encryption method:</guimenu> "
@@ -2805,13 +2816,13 @@ msgstr ""
 "alábbi lehetőségeket adja:"
 
 #. Tag: term
-#: using-d-i.xml:1777
+#: using-d-i.xml:1785
 #, no-c-format
 msgid "Encryption: <userinput>AES256</userinput>"
 msgstr "Titkosítás: <userinput>AES256</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1779
+#: using-d-i.xml:1787
 #, no-c-format
 msgid ""
 "For loop-AES, unlike dm-crypt, the options for cipher and key size are "
@@ -2823,25 +2834,25 @@ msgstr ""
 "szakaszt a titkosításokról és kulcsok méreteiről további adatokért."
 
 #. Tag: term
-#: using-d-i.xml:1789
+#: using-d-i.xml:1797
 #, no-c-format
 msgid "Encryption key: <userinput>Keyfile (GnuPG)</userinput>"
 msgstr "Titkosító kulcs: <userinput>Kulcsfájl (GnuPG)</userinput>"
 
 #. Tag: para
-#: using-d-i.xml:1791
+#: using-d-i.xml:1799
 #, no-c-format
 msgid "Here you can select the type of the encryption key for this partition."
 msgstr "Itt adható meg a titkosító kulcs típusa e partícióhoz."
 
 #. Tag: term
-#: using-d-i.xml:1797
+#: using-d-i.xml:1805
 #, no-c-format
 msgid "Keyfile (GnuPG)"
 msgstr "Kulcsfájl (GnuPG)"
 
 #. Tag: para
-#: using-d-i.xml:1798
+#: using-d-i.xml:1806
 #, no-c-format
 msgid ""
 "The encryption key will be generated from random data during the "
@@ -2855,19 +2866,19 @@ msgstr ""
 "egy ilyen megadására)."
 
 #. Tag: para
-#: using-d-i.xml:1811
+#: using-d-i.xml:1819
 #, no-c-format
 msgid "Please see the section on random keys above."
 msgstr "Lásd a véletlen kulcsok szakaszt fent."
 
 #. Tag: para
-#: using-d-i.xml:1825
+#: using-d-i.xml:1833
 #, no-c-format
 msgid "Please see the the section on erasing data above."
 msgstr "Lásd az adatok törlése szakaszt fent."
 
 #. Tag: para
-#: using-d-i.xml:1834
+#: using-d-i.xml:1842
 #, no-c-format
 msgid ""
 "After you have selected the desired parameters for your encrypted "
@@ -2884,7 +2895,7 @@ msgstr ""
 "egy új partíciós tábla írását. A nagy partíciókon ez eltart egy ideig."
 
 #. Tag: para
-#: using-d-i.xml:1844
+#: using-d-i.xml:1852
 #, no-c-format
 msgid ""
 "Next you will be asked to enter a passphrase for partitions configured to "
@@ -2900,7 +2911,7 @@ msgstr ""
 "rokonok nevei és így tovább)."
 
 #. Tag: para
-#: using-d-i.xml:1853
+#: using-d-i.xml:1861
 #, no-c-format
 msgid ""
 "Before you input any passphrases, you should have made sure that your "
@@ -2923,7 +2934,7 @@ msgstr ""
 "gyökér fájlrendszer számára."
 
 #. Tag: para
-#: using-d-i.xml:1866
+#: using-d-i.xml:1874
 #, no-c-format
 msgid ""
 "If you selected to use methods other than a passphrase to create encryption "
@@ -2945,7 +2956,7 @@ msgstr ""
 "titkosítandó partíciónál megismételhető."
 
 #. Tag: para
-#: using-d-i.xml:1882
+#: using-d-i.xml:1890
 #, no-c-format
 msgid ""
 "After returning to the main partitioning menu, you will see all encrypted "
@@ -2977,7 +2988,7 @@ msgstr ""
 "kötetekhez és módosítani fájlrendszer típusukat, ha nem tetszik."
 
 #. Tag: para
-#: using-d-i.xml:1895
+#: using-d-i.xml:1903
 #, no-c-format
 msgid ""
 "One thing to note here are the identifiers in parentheses "
@@ -2996,7 +3007,7 @@ msgstr ""
 "linkend=\"mount-encrypted-volumes\"/>."
 
 #. Tag: para
-#: using-d-i.xml:1905
+#: using-d-i.xml:1913
 #, no-c-format
 msgid ""
 "Once you are satisfied with the partitioning scheme, continue with the "
@@ -3004,13 +3015,13 @@ msgid ""
 msgstr "Ha a partíciós séma megfelel, folyatható a telepítés."
 
 #. Tag: title
-#: using-d-i.xml:1916
+#: using-d-i.xml:1924
 #, no-c-format
 msgid "Installing the Base System"
 msgstr "Az alaprendszer telepítése"
 
 #. Tag: para
-#: using-d-i.xml:1917
+#: using-d-i.xml:1925
 #, no-c-format
 msgid ""
 "Although this stage is the least problematic, it consumes a significant "
@@ -3023,7 +3034,7 @@ msgstr ""
 "Lassú gép vagy hálózati kapcsolat esetén eltart egy kis ideig."
 
 #. Tag: para
-#: using-d-i.xml:1930
+#: using-d-i.xml:1938
 #, no-c-format
 msgid ""
 "During installation of the base system, package unpacking and setup messages "
@@ -3039,7 +3050,7 @@ msgstr ""
 "Alt</keycap><keycap>F1</keycap></keycombo> használható."
 
 #. Tag: para
-#: using-d-i.xml:1939
+#: using-d-i.xml:1947
 #, no-c-format
 msgid ""
 "The unpack/setup messages generated during this phase are also saved in "
@@ -3051,7 +3062,7 @@ msgstr ""
 "ellenőrzésükre, ha a telepítés soros konzolon át történik."
 
 #. Tag: para
-#: using-d-i.xml:1945
+#: using-d-i.xml:1953
 #, no-c-format
 msgid ""
 "As part of the installation, a Linux kernel will be installed. At the "
@@ -3064,13 +3075,13 @@ msgstr ""
 "az elérhető kernelek egy listából választhatók."
 
 #. Tag: title
-#: using-d-i.xml:1957
+#: using-d-i.xml:1965
 #, no-c-format
 msgid "Setting Up Users And Passwords"
 msgstr "Felhasználók és jelszavaik felvétele"
 
 #. Tag: para
-#: using-d-i.xml:1958
+#: using-d-i.xml:1966
 #, no-c-format
 msgid ""
 "After the base system has been installed, the installer will allow you to "
@@ -3079,13 +3090,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:1972
+#: using-d-i.xml:1980
 #, no-c-format
 msgid "Set the Root Password"
 msgstr "A root jelszó beállítása"
 
 #. Tag: para
-#: using-d-i.xml:1976
+#: using-d-i.xml:1984
 #, no-c-format
 msgid ""
 "The <emphasis>root</emphasis> account is also called the <emphasis>super-"
@@ -3099,7 +3110,7 @@ msgstr ""
 "ekkor is csak a lehető legrövidebb ideig."
 
 #. Tag: para
-#: using-d-i.xml:1984
+#: using-d-i.xml:1992
 #, no-c-format
 msgid ""
 "Any password you create should contain at least 6 characters, and should "
@@ -3115,7 +3126,7 @@ msgstr ""
 "használatát."
 
 #. Tag: para
-#: using-d-i.xml:1992
+#: using-d-i.xml:2000
 #, no-c-format
 msgid ""
 "If anyone ever tells you they need your root password, be extremely wary. "
@@ -3127,13 +3138,13 @@ msgstr ""
 "ha egy gépet másokkal felügyelsz."
 
 #. Tag: title
-#: using-d-i.xml:2002
+#: using-d-i.xml:2010
 #, no-c-format
 msgid "Create an Ordinary User"
 msgstr "Egy szokásos felhasználó létrehozása"
 
 #. Tag: para
-#: using-d-i.xml:2004
+#: using-d-i.xml:2012
 #, no-c-format
 msgid ""
 "The system will ask you whether you wish to create an ordinary user account "
@@ -3147,7 +3158,7 @@ msgstr ""
 "bejelentkezésre."
 
 #. Tag: para
-#: using-d-i.xml:2013
+#: using-d-i.xml:2021
 #, no-c-format
 msgid ""
 "Why not? Well, one reason to avoid using root's privileges is that it is "
@@ -3167,7 +3178,7 @@ msgstr ""
 "elolvasol egyet, ha ez új neked."
 
 #. Tag: para
-#: using-d-i.xml:2023
+#: using-d-i.xml:2031
 #, no-c-format
 msgid ""
 "You will first be prompted for the user's full name. Then you'll be asked "
@@ -3181,7 +3192,7 @@ msgstr ""
 "fiókhoz tartozó jelszót."
 
 #. Tag: para
-#: using-d-i.xml:2030
+#: using-d-i.xml:2038
 #, no-c-format
 msgid ""
 "If at any point after installation you would like to create another account, "
@@ -3191,13 +3202,13 @@ msgstr ""
 "<command>adduser</command> parancsot."
 
 #. Tag: title
-#: using-d-i.xml:2041
+#: using-d-i.xml:2049
 #, no-c-format
 msgid "Installing Additional Software"
 msgstr "További szoftverek telepítése"
 
 #. Tag: para
-#: using-d-i.xml:2042
+#: using-d-i.xml:2050
 #, fuzzy, no-c-format
 msgid ""
 "At this point you have a usable but limited system. Most users will want to "
@@ -3212,13 +3223,13 @@ msgstr ""
 "hálózat esetén."
 
 #. Tag: title
-#: using-d-i.xml:2057
+#: using-d-i.xml:2065
 #, no-c-format
 msgid "Configuring apt"
 msgstr "Az apt beállítása"
 
 #. Tag: para
-#: using-d-i.xml:2059
+#: using-d-i.xml:2067
 #, no-c-format
 msgid ""
 "One of the tools used to install packages on a &debian; system is a program "
@@ -3252,7 +3263,7 @@ msgstr ""
 "hivatalosan ajánlott csomag-kezelő eszköz az <command>aptitude</command>."
 
 #. Tag: para
-#: using-d-i.xml:2083
+#: using-d-i.xml:2091
 #, fuzzy, no-c-format
 msgid ""
 "<command>apt</command> must be configured so that it knows from where to "
@@ -3267,7 +3278,7 @@ msgstr ""
 "után is szerkeszthetők."
 
 #. Tag: para
-#: using-d-i.xml:2090
+#: using-d-i.xml:2098
 #, no-c-format
 msgid ""
 "If you are installing at default priority, the installer will largely take "
@@ -3279,7 +3290,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2099
+#: using-d-i.xml:2107
 #, no-c-format
 msgid ""
 "If you are installing at a lower priority (e.g. in expert mode), you will be "
@@ -3290,13 +3301,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2110
+#: using-d-i.xml:2118
 #, no-c-format
 msgid "Installing from more than one CD or DVD"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2112
+#: using-d-i.xml:2120
 #, no-c-format
 msgid ""
 "If you are installing from a CD or a DVD that is part of a larger set, the "
@@ -3306,7 +3317,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2119
+#: using-d-i.xml:2127
 #, no-c-format
 msgid ""
 "If you do not have any additional CDs or DVDs, that is no problem: using "
@@ -3316,7 +3327,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2127
+#: using-d-i.xml:2135
 #, no-c-format
 msgid ""
 "Packages are included on CDs (and DVDs) in the order of their popularity. "
@@ -3326,7 +3337,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2134
+#: using-d-i.xml:2142
 #, no-c-format
 msgid ""
 "It also means that buying or downloading and burning a full CD set is just a "
@@ -3337,7 +3348,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2143
+#: using-d-i.xml:2151
 #, no-c-format
 msgid ""
 "A good rule of thumb is that for a regular desktop installation (using the "
@@ -3347,7 +3358,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2151
+#: using-d-i.xml:2159
 #, no-c-format
 msgid ""
 "If you do scan multiple CDs or DVDs, the installer will prompt you to "
@@ -3359,13 +3370,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2164
+#: using-d-i.xml:2172
 #, no-c-format
 msgid "Using a network mirror"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2166
+#: using-d-i.xml:2174
 #, no-c-format
 msgid ""
 "One question that will be asked during most installs is whether or not to "
@@ -3374,7 +3385,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2172
+#: using-d-i.xml:2180
 #, no-c-format
 msgid ""
 "If you are <emphasis>not</emphasis> installing from a full CD or DVD or "
@@ -3386,7 +3397,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2181
+#: using-d-i.xml:2189
 #, no-c-format
 msgid ""
 "If you are installing from a single full CD or using a full CD image, using "
@@ -3399,7 +3410,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2192
+#: using-d-i.xml:2200
 #, no-c-format
 msgid ""
 "If you are installing from a DVD or using a DVD image, any packages needed "
@@ -3409,7 +3420,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2199
+#: using-d-i.xml:2207
 #, no-c-format
 msgid ""
 "One advantage of adding a network mirror is that updates that have occurred "
@@ -3420,7 +3431,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2206
+#: using-d-i.xml:2214
 #, no-c-format
 msgid ""
 "In summary: selecting a network mirror is generally a good idea, except if "
@@ -3431,26 +3442,26 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2215
+#: using-d-i.xml:2223
 #, no-c-format
 msgid "the tasks you select in the next step of the installation,"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2220
+#: using-d-i.xml:2228
 #, no-c-format
 msgid "which packages are needed for those tasks,"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2225
+#: using-d-i.xml:2233
 #, no-c-format
 msgid ""
 "which of those packages are present on the CDs or DVDs you have scanned, and"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2230
+#: using-d-i.xml:2238
 #, no-c-format
 msgid ""
 "whether any updated versions of packages included on the CDs or DVDs are "
@@ -3459,7 +3470,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2239
+#: using-d-i.xml:2247
 #, no-c-format
 msgid ""
 "Note that the last point means that, even if you choose not to use a network "
@@ -3469,13 +3480,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2255
+#: using-d-i.xml:2263
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr "Szoftverek kiválasztása és telepítése"
 
 #. Tag: para
-#: using-d-i.xml:2257
+#: using-d-i.xml:2265
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -3492,7 +3503,7 @@ msgstr ""
 "összpontosít, hogy gyorsan beállítsa a gépet különböző feladatok elvégzésére."
 
 #. Tag: para
-#: using-d-i.xml:2266
+#: using-d-i.xml:2274
 #, no-c-format
 msgid ""
 "So, you have the ability to choose <emphasis>tasks</emphasis> first, and "
@@ -3525,7 +3536,7 @@ msgstr ""
 "igényét."
 
 #. Tag: para
-#: using-d-i.xml:2293
+#: using-d-i.xml:2301
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Some tasks may be pre-selected based on the characteristics of the "
@@ -3543,7 +3554,7 @@ msgstr ""
 "hogy egyáltalán ne telepíts semmit ezen a módon."
 
 #. Tag: para
-#: using-d-i.xml:2300
+#: using-d-i.xml:2308
 #, no-c-format
 msgid ""
 "Unless you are using the special KDE or Xfce CDs, the <quote>Desktop "
@@ -3551,7 +3562,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2307
+#: using-d-i.xml:2315
 #, no-c-format
 msgid ""
 "It is not possible to interactively select a different desktop during the "
@@ -3564,7 +3575,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2317
+#: using-d-i.xml:2325
 #, no-c-format
 msgid ""
 "Note that this will only work if the packages needed for KDE or Xfce are "
@@ -3575,7 +3586,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2325
+#: using-d-i.xml:2333
 #, fuzzy, no-c-format
 #| msgid ""
 #| "The various server tasks will install software roughly as follows. DNS "
@@ -3603,7 +3614,7 @@ msgstr ""
 "classname>."
 
 #. Tag: para
-#: using-d-i.xml:2337
+#: using-d-i.xml:2345
 #, fuzzy, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -3615,7 +3626,7 @@ msgstr ""
 "választott feladatok részei."
 
 #. Tag: para
-#: using-d-i.xml:2344
+#: using-d-i.xml:2352
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -3625,7 +3636,7 @@ msgstr ""
 "feladat kijelölésének váltásához."
 
 #. Tag: para
-#: using-d-i.xml:2350
+#: using-d-i.xml:2358
 #, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -3641,7 +3652,7 @@ msgstr ""
 "telepítésének leállítására."
 
 #. Tag: para
-#: using-d-i.xml:2359
+#: using-d-i.xml:2367
 #, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -3658,7 +3669,7 @@ msgstr ""
 "használatakor történik."
 
 #. Tag: para
-#: using-d-i.xml:2368
+#: using-d-i.xml:2376
 #, no-c-format
 msgid ""
 "Each package you selected with <command>tasksel</command> is downloaded, "
@@ -3672,13 +3683,13 @@ msgstr ""
 "során."
 
 #. Tag: title
-#: using-d-i.xml:2381
+#: using-d-i.xml:2389
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "A rendszer indíthatóvá tétele"
 
 #. Tag: para
-#: using-d-i.xml:2383
+#: using-d-i.xml:2391
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -3692,13 +3703,13 @@ msgstr ""
 "linkend=\"boot-dev-select-sun\"/> részt.</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2398
+#: using-d-i.xml:2406
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "Más operációs rendszerek érzékelése"
 
 #. Tag: para
-#: using-d-i.xml:2400
+#: using-d-i.xml:2408
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -3713,7 +3724,7 @@ msgstr ""
 "Debian mellett."
 
 #. Tag: para
-#: using-d-i.xml:2408
+#: using-d-i.xml:2416
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -3729,13 +3740,13 @@ msgstr ""
 "dokumentációját."
 
 #. Tag: title
-#: using-d-i.xml:2426
+#: using-d-i.xml:2434
 #, no-c-format
 msgid "Install <command>aboot</command> on a Hard Disk"
 msgstr "<command>aboot</command> telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2427
+#: using-d-i.xml:2435
 #, no-c-format
 msgid ""
 "If you have booted from SRM and you select this option, the installer will "
@@ -3756,13 +3767,13 @@ msgstr ""
 "oda, ahova a Debiant is telepítetted, a GNU/Linuxot flopiról kell indítanod."
 
 #. Tag: title
-#: using-d-i.xml:2447
+#: using-d-i.xml:2455
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "<command>palo</command>-telepítő"
 
 #. Tag: para
-#: using-d-i.xml:2448
+#: using-d-i.xml:2456
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -3778,19 +3789,19 @@ msgstr ""
 "<command>PALO</command> olvas Linux partíciókat."
 
 #. Tag: para
-#: using-d-i.xml:2457
+#: using-d-i.xml:2465
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( több adat kell )"
 
 #. Tag: title
-#: using-d-i.xml:2469
+#: using-d-i.xml:2477
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "<command>Grub</command> telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2471
+#: using-d-i.xml:2479
 #, fuzzy, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -3802,7 +3813,7 @@ msgstr ""
 "egyaránt."
 
 #. Tag: para
-#: using-d-i.xml:2477
+#: using-d-i.xml:2485
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -3814,7 +3825,7 @@ msgstr ""
 "a grub kézikönyvet teljes információért."
 
 #. Tag: para
-#: using-d-i.xml:2483
+#: using-d-i.xml:2491
 #, fuzzy, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -3825,13 +3836,13 @@ msgstr ""
 "válaszd a kívánt boot betöltőt."
 
 #. Tag: title
-#: using-d-i.xml:2496
+#: using-d-i.xml:2504
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "<command>LILO</command> telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2498
+#: using-d-i.xml:2506
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -3847,7 +3858,7 @@ msgstr ""
 "\">LILO mini-HOGYAN</ulink> is hasznos."
 
 #. Tag: para
-#: using-d-i.xml:2508
+#: using-d-i.xml:2516
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -3861,7 +3872,7 @@ msgstr ""
 "számára kézzel kell majd hozzáadni a bejegyzést a menüben a telepítés után."
 
 #. Tag: para
-#: using-d-i.xml:2516
+#: using-d-i.xml:2524
 #, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -3871,13 +3882,13 @@ msgstr ""
 "telepítésére:"
 
 #. Tag: term
-#: using-d-i.xml:2523
+#: using-d-i.xml:2531
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "Mester Boot Rekord (MBR)"
 
 #. Tag: para
-#: using-d-i.xml:2523
+#: using-d-i.xml:2531
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -3887,13 +3898,13 @@ msgstr ""
 "irányítását."
 
 #. Tag: term
-#: using-d-i.xml:2530
+#: using-d-i.xml:2538
 #, no-c-format
 msgid "new Debian partition"
 msgstr "új Debian partíció"
 
 #. Tag: para
-#: using-d-i.xml:2530
+#: using-d-i.xml:2538
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -3905,13 +3916,13 @@ msgstr ""
 "szolgál."
 
 #. Tag: term
-#: using-d-i.xml:2539
+#: using-d-i.xml:2547
 #, no-c-format
 msgid "Other choice"
 msgstr "Más választás"
 
 #. Tag: para
-#: using-d-i.xml:2539
+#: using-d-i.xml:2547
 #, fuzzy, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -3927,7 +3938,7 @@ msgstr ""
 "sda</filename>."
 
 #. Tag: para
-#: using-d-i.xml:2549
+#: using-d-i.xml:2557
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -3943,13 +3954,13 @@ msgstr ""
 "Debian rendszerbe tartósan visszatérj!"
 
 #. Tag: title
-#: using-d-i.xml:2565
+#: using-d-i.xml:2573
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "Az <command>ELILO</command> betöltő telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2567
+#: using-d-i.xml:2575
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -3976,7 +3987,7 @@ msgstr ""
 "indítására."
 
 #. Tag: para
-#: using-d-i.xml:2583
+#: using-d-i.xml:2591
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -3992,13 +4003,13 @@ msgstr ""
 "<emphasis>gyökér</emphasis> fájlrendszerrel egyező lemezen van."
 
 #. Tag: title
-#: using-d-i.xml:2595
+#: using-d-i.xml:2603
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "Válaszd a helyes partíciót!"
 
 #. Tag: para
-#: using-d-i.xml:2597
+#: using-d-i.xml:2605
 #, no-c-format
 msgid ""
 "The criteria for selecting a partition is that it is FAT format filesystem "
@@ -4015,13 +4026,13 @@ msgstr ""
 "formázhatja a partíciót a telepítés alatt, letörölheti a korábbi tartalmat!"
 
 #. Tag: title
-#: using-d-i.xml:2612
+#: using-d-i.xml:2620
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "EFI Partíció Tartalom"
 
 #. Tag: para
-#: using-d-i.xml:2614
+#: using-d-i.xml:2622
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4049,13 +4060,13 @@ msgstr ""
 "más fájlok is kerülhetnek e fájlrendszerre."
 
 #. Tag: filename
-#: using-d-i.xml:2636
+#: using-d-i.xml:2644
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2637
+#: using-d-i.xml:2645
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4067,13 +4078,13 @@ msgstr ""
 "fájlnevekkel."
 
 #. Tag: filename
-#: using-d-i.xml:2646
+#: using-d-i.xml:2654
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2647
+#: using-d-i.xml:2655
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4086,13 +4097,13 @@ msgstr ""
 "GNU/Linux</guimenuitem> menüpontja mögött."
 
 #. Tag: filename
-#: using-d-i.xml:2657
+#: using-d-i.xml:2665
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2658
+#: using-d-i.xml:2666
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4106,13 +4117,13 @@ msgstr ""
 "fájl, melyre a <filename>/initrd.img</filename> jelképes lánc hivatkozik."
 
 #. Tag: filename
-#: using-d-i.xml:2670
+#: using-d-i.xml:2678
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2671
+#: using-d-i.xml:2679
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4124,13 +4135,13 @@ msgstr ""
 "<filename>/usr/sbin/elilo</filename> következő futtatásakor."
 
 #. Tag: filename
-#: using-d-i.xml:2681
+#: using-d-i.xml:2689
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2682
+#: using-d-i.xml:2690
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4144,13 +4155,13 @@ msgstr ""
 "vmlinuz</filename> jelképes lánc hivatkozik."
 
 #. Tag: title
-#: using-d-i.xml:2702
+#: using-d-i.xml:2710
 #, no-c-format
 msgid "<command>arcboot</command>-installer"
 msgstr "<command>arcboot</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2703
+#: using-d-i.xml:2711
 #, no-c-format
 msgid ""
 "The boot loader on SGI machines is <command>arcboot</command>. It has to be "
@@ -4193,13 +4204,13 @@ msgstr ""
 "<command>boot</command> parancs."
 
 #. Tag: replaceable
-#: using-d-i.xml:2722
+#: using-d-i.xml:2730
 #, no-c-format
 msgid "scsi"
 msgstr "scsi"
 
 #. Tag: para
-#: using-d-i.xml:2723
+#: using-d-i.xml:2731
 #, no-c-format
 msgid ""
 "is the SCSI bus to be booted from, this is <userinput>0</userinput> for the "
@@ -4208,13 +4219,13 @@ msgstr ""
 ": az indítandó SCSI busz, <userinput>0</userinput> az alaplapi vezérlőknél"
 
 #. Tag: replaceable
-#: using-d-i.xml:2731
+#: using-d-i.xml:2739
 #, no-c-format
 msgid "disk"
 msgstr "lemez"
 
 #. Tag: para
-#: using-d-i.xml:2732
+#: using-d-i.xml:2740
 #, no-c-format
 msgid ""
 "is the SCSI ID of the hard disk on which <command>arcboot</command> is "
@@ -4223,13 +4234,13 @@ msgstr ""
 ": a merevlemez SCSI azonosítója, melyre az <command>arboot</command> települt"
 
 #. Tag: replaceable
-#: using-d-i.xml:2740
+#: using-d-i.xml:2748
 #, no-c-format
 msgid "partnr"
 msgstr "part.sz."
 
 #. Tag: para
-#: using-d-i.xml:2741
+#: using-d-i.xml:2749
 #, no-c-format
 msgid ""
 "is the number of the partition on which <filename>/etc/arcboot.conf</"
@@ -4239,13 +4250,13 @@ msgstr ""
 "bejegyzés neve, alapban <quote>linux</quote>."
 
 #. Tag: replaceable
-#: using-d-i.xml:2749
+#: using-d-i.xml:2757
 #, no-c-format
 msgid "config"
 msgstr "config"
 
 #. Tag: para
-#: using-d-i.xml:2750
+#: using-d-i.xml:2758
 #, no-c-format
 msgid ""
 "is the name of the configuration entry in <filename>/etc/arcboot.conf</"
@@ -4253,13 +4264,13 @@ msgid ""
 msgstr ": a "
 
 #. Tag: title
-#: using-d-i.xml:2771
+#: using-d-i.xml:2779
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "<command>Yaboot</command> telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2772
+#: using-d-i.xml:2780
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4278,13 +4289,13 @@ msgstr ""
 "OpenFirmware beállításra kerül a &debian; indítására."
 
 #. Tag: title
-#: using-d-i.xml:2790
+#: using-d-i.xml:2798
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "<command>Quik</command> telepítése egy merevlemezen"
 
 #. Tag: para
-#: using-d-i.xml:2791
+#: using-d-i.xml:2799
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4297,13 +4308,13 @@ msgstr ""
 "beállítását. Ez megy a 7200, 7300 és 7600 gépeken és pár másolatán."
 
 #. Tag: title
-#: using-d-i.xml:2807
+#: using-d-i.xml:2815
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "<command>zipl</command>-installer"
 
 #. Tag: para
-#: using-d-i.xml:2808
+#: using-d-i.xml:2816
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4319,13 +4330,13 @@ msgstr ""
 "több <command>ZIPL</command> adatért."
 
 #. Tag: title
-#: using-d-i.xml:2825
+#: using-d-i.xml:2833
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "<command>SILO</command> boot betöltő telepítése merevlemezre"
 
 #. Tag: para
-#: using-d-i.xml:2827
+#: using-d-i.xml:2835
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -4354,13 +4365,13 @@ msgstr ""
 "ha e GNU/Linux rendszeredet egy SunOS/Solaris mellé telepíted."
 
 #. Tag: title
-#: using-d-i.xml:2852
+#: using-d-i.xml:2860
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "Folytatás boot betöltő nélkül"
 
 #. Tag: para
-#: using-d-i.xml:2854
+#: using-d-i.xml:2862
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -4378,7 +4389,7 @@ msgstr ""
 "megtartása és használata a GNU/Linux indításához.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2863
+#: using-d-i.xml:2871
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -4399,13 +4410,13 @@ msgstr ""
 "<filename>/boot</filename> fájlrendszer adatai."
 
 #. Tag: title
-#: using-d-i.xml:2880
+#: using-d-i.xml:2888
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "A telepítés befejezése"
 
 #. Tag: para
-#: using-d-i.xml:2881
+#: using-d-i.xml:2889
 #, fuzzy, no-c-format
 msgid ""
 "This is the last step in the Debian installation process during which the "
@@ -4416,13 +4427,13 @@ msgstr ""
 "feladatai utáni rendrakásból áll."
 
 #. Tag: title
-#: using-d-i.xml:2894
+#: using-d-i.xml:2902
 #, fuzzy, no-c-format
 msgid "Setting the System Clock"
 msgstr "A rendszer beállítása"
 
 #. Tag: para
-#: using-d-i.xml:2896
+#: using-d-i.xml:2904
 #, fuzzy, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -4435,7 +4446,7 @@ msgstr ""
 "például a telepített más operációs rendszerek alapján."
 
 #. Tag: para
-#: using-d-i.xml:2903
+#: using-d-i.xml:2911
 #, fuzzy, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -4454,7 +4465,7 @@ msgstr ""
 "elrontsa a rendszert.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:2914
+#: using-d-i.xml:2922
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -4463,13 +4474,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: using-d-i.xml:2929
+#: using-d-i.xml:2937
 #, fuzzy, no-c-format
 msgid "Reboot the System"
 msgstr "A rendszer beállítása"
 
 #. Tag: para
-#: using-d-i.xml:2931
+#: using-d-i.xml:2939
 #, fuzzy, no-c-format
 msgid ""
 "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -4482,7 +4493,7 @@ msgstr ""
 "rendszerre."
 
 #. Tag: para
-#: using-d-i.xml:2937
+#: using-d-i.xml:2945
 #, fuzzy, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -4496,13 +4507,13 @@ msgstr ""
 "gyökér fájlrendszer számára választott DASD eszközről."
 
 #. Tag: title
-#: using-d-i.xml:2950
+#: using-d-i.xml:2958
 #, no-c-format
 msgid "Miscellaneous"
 msgstr "Egyebek"
 
 #. Tag: para
-#: using-d-i.xml:2951
+#: using-d-i.xml:2959
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -4513,13 +4524,13 @@ msgstr ""
 "folyamatnak, de nehezebb helyzetekhez készen állnak a felhasználó segítésére."
 
 #. Tag: title
-#: using-d-i.xml:2964
+#: using-d-i.xml:2972
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "Telepítő naplók mentése"
 
 #. Tag: para
-#: using-d-i.xml:2966
+#: using-d-i.xml:2974
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -4531,7 +4542,7 @@ msgstr ""
 "installer/</filename> könyvtárba."
 
 #. Tag: para
-#: using-d-i.xml:2973
+#: using-d-i.xml:2981
 #, no-c-format
 msgid ""
 "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -4547,13 +4558,13 @@ msgstr ""
 "jelentésbe."
 
 #. Tag: title
-#: using-d-i.xml:2993
+#: using-d-i.xml:3001
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "A héj használata és a naplók megtekintése"
 
 #. Tag: para
-#: using-d-i.xml:2995
+#: using-d-i.xml:3003
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -4578,13 +4589,13 @@ msgstr ""
 "<keycap>F1</keycap></keycombo> gombokat a telepítőre visszaváltáshoz."
 
 #. Tag: para
-#: using-d-i.xml:3013
+#: using-d-i.xml:3021
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3017
+#: using-d-i.xml:3025
 #, fuzzy, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -4599,7 +4610,7 @@ msgstr ""
 "lezárásához."
 
 #. Tag: para
-#: using-d-i.xml:3025
+#: using-d-i.xml:3033
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -4616,7 +4627,7 @@ msgstr ""
 "szép képességgel mint például az automata kiegészítés és történet."
 
 #. Tag: para
-#: using-d-i.xml:3034
+#: using-d-i.xml:3042
 #, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -4628,7 +4639,7 @@ msgstr ""
 "filename> könyvtárban találhatók."
 
 #. Tag: para
-#: using-d-i.xml:3041
+#: using-d-i.xml:3049
 #, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -4640,7 +4651,7 @@ msgstr ""
 "szolgál."
 
 #. Tag: para
-#: using-d-i.xml:3047
+#: using-d-i.xml:3055
 #, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -4653,13 +4664,13 @@ msgstr ""
 "a csere partíció bekapcsolására és ne tedd a héjból."
 
 #. Tag: title
-#: using-d-i.xml:3062
+#: using-d-i.xml:3070
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "Telepítés hálózatról"
 
 #. Tag: para
-#: using-d-i.xml:3064
+#: using-d-i.xml:3072
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -4676,7 +4687,7 @@ msgstr ""
 "\"/> részben írtak szerint.)"
 
 #. Tag: para
-#: using-d-i.xml:3074
+#: using-d-i.xml:3082
 #, no-c-format
 msgid ""
 "This component is not loaded into the main installation menu by default, so "
@@ -4697,7 +4708,7 @@ msgstr ""
 "távolról SSH-n át</guimenuitem> új menüelem jelzi."
 
 #. Tag: para
-#: using-d-i.xml:3087
+#: using-d-i.xml:3095
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -4707,7 +4718,7 @@ msgstr ""
 "után."
 
 #. Tag: para
-#: using-d-i.xml:3092
+#: using-d-i.xml:3100
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -4728,7 +4739,7 @@ msgstr ""
 "távolról folytató személy</quote> számára."
 
 #. Tag: para
-#: using-d-i.xml:3104
+#: using-d-i.xml:3112
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -4740,7 +4751,7 @@ msgstr ""
 "kiválasztható."
 
 #. Tag: para
-#: using-d-i.xml:3110
+#: using-d-i.xml:3118
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -4772,7 +4783,7 @@ msgstr ""
 "gép ujjlenyomata."
 
 #. Tag: para
-#: using-d-i.xml:3127
+#: using-d-i.xml:3135
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -4788,7 +4799,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3140
+#: using-d-i.xml:3148
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -4802,7 +4813,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:3153
+#: using-d-i.xml:3161
 #, fuzzy, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -4824,7 +4835,7 @@ msgstr ""
 "kapcsolódsz."
 
 #. Tag: para
-#: using-d-i.xml:3169
+#: using-d-i.xml:3177
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -4843,7 +4854,7 @@ msgstr ""
 "folyamatban használható, de héjakhoz több is."
 
 #. Tag: para
-#: using-d-i.xml:3179
+#: using-d-i.xml:3187
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -4857,6 +4868,164 @@ msgstr ""
 "most tartalmazó adatbázist. Ez sikertelen telepítést okozhat vagy gondokat a "
 "telepített rendszeren."
 
+#. Tag: title
+#: using-d-i.xml:3207
+#, no-c-format
+msgid "Loading Missing Firmware"
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3208
+#, no-c-format
+msgid ""
+"As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
+"firmware to be loaded. In most cases the device will not work at all if the "
+"firmware is not available; sometimes basic functionality is not impaired if "
+"it is missing and the firmware is only needed to enable additional features."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3216
+#, no-c-format
+msgid ""
+"If a device driver requests firmware that is not available, &d-i; will "
+"display a dialog offering to load the missing firmware. If this option is "
+"selected, &d-i; will scan available devices for either loose firmware files "
+"or packages containing firmware. If found, the firmware will be copied to "
+"the correct location (<filename>/lib/firmware</filename>) and the driver "
+"module will be reloaded."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3226
+#, no-c-format
+msgid ""
+"Which devices are scanned and which file systems are supported depends on "
+"the architecture, the installation method and the stage of the installation. "
+"Especially during the early stages of the installation, loading the firmware "
+"is most likely to succeed from a FAT-formatted floppy disk or USB stick. "
+"<phrase arch=\"x86\">On i386 and amd64 firmware can also be loaded from an "
+"MMC or SD card.</phrase>"
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3236
+#, no-c-format
+msgid ""
+"Note that it is possible to skip loading the firmware if you know the device "
+"will also function without it, or if the device is not needed during the "
+"installation."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3243
+#, no-c-format
+msgid ""
+"Support for loading firmware is still relatively basic and is likely to be "
+"improved in future releases of the installer. Currently &d-i; will for "
+"example not display any warning if you choose to load missing firmware, but "
+"the requested firmware is not found. Please <xref linkend=\"submit-bug\"/"
+">report any issues you encounter."
+msgstr ""
+
+#. Tag: title
+#: using-d-i.xml:3253
+#, no-c-format
+msgid "Preparing a medium"
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3254
+#, no-c-format
+msgid ""
+"Although in some cases the firmware can also be loaded from a partition on a "
+"hard disk, the most common method to load firmware will be from some "
+"removable medium such as a floppy disk or a USB stick. The firmware files or "
+"packages must be placed in either the root directory or a directory named "
+"<filename>/firmware</filename> of the file system on the medium. The "
+"recommended file system to use is FAT as that is most certain to be "
+"supported during the early stages of the installation."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3264
+#, no-c-format
+msgid ""
+"Tarballs containing current packages for the most common firmware are "
+"available from: <itemizedlist> <listitem><para> <ulink url=\"&url-firmware-"
+"tarballs;\"></ulink> </para></listitem> </itemizedlist> Just download the "
+"tarball for the correct release and unpack it to the file system on the "
+"medium."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3278
+#, no-c-format
+msgid ""
+"If the firmware you need is not included in the tarball, you can also "
+"download specific firmware packages from the (non-free section of the) "
+"archive. The following overview should list most available firmware packages "
+"but is not guaranteed to be complete and may also contain non-firmware "
+"packages:"
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3292
+#, no-c-format
+msgid ""
+"It is also possible to copy individual firmware files to the medium. Loose "
+"firmware could be obtained for example from an already installed system or "
+"from a hardware vendor."
+msgstr ""
+
+#. Tag: title
+#: using-d-i.xml:3301
+#, no-c-format
+msgid "Firmware and the Installed System"
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3302
+#, no-c-format
+msgid ""
+"Any firmware loaded during the installation will be copied automatically to "
+"the installed system. In most cases this will ensure that the device that "
+"requires the firmware will also work correctly after the system is rebooted "
+"into the installed system. However, if the installed system runs a different "
+"kernel version from the installer there is a slight chance that the firmware "
+"cannot be loaded due to version skew."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3311
+#, no-c-format
+msgid ""
+"If the firmware was loaded from a firmware package, &d-i; will also install "
+"this package for the installed system and will automatically add the non-"
+"free section of the package archive in APT's <filename>sources.list</"
+"filename>. This has the advantage that the firmware should be updated "
+"automatically if a new version becomes available."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3319
+#, no-c-format
+msgid ""
+"If loading the firmware was skipped during the installation, the relevant "
+"device will probably not work with the installed system until the firmware "
+"(package) is installed manually."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3326
+#, no-c-format
+msgid ""
+"If the firmware was loaded from loose firmware files, the firmware copied to "
+"the installed system will <emphasis>not</emphasis> be automatically updated "
+"unless the corresponding firmware package (if available) is installed after "
+"the installation is completed."
+msgstr ""
+
 #~ msgid ""
 #~ "Also, if you are running the SSH session from an X terminal, you should "
 #~ "not resize the window as that will result in the connection being "