[SILENT_COMMIT] Update of POT and PO files for the installation-guide

4 files changed, 360 insertions, 208 deletions

diff --git a/po/da/hardware.po b/po/da/hardware.po
index eede9f1ae..a43b83e08 100644
--- a/po/da/hardware.po
+++ b/po/da/hardware.po
@@ -16,7 +16,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_hardware\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2022-05-19 22:02+0000\n"
+"POT-Creation-Date: 2023-02-15 23:04+0000\n"
 "PO-Revision-Date: 2022-07-08 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -1878,22 +1878,11 @@ msgstr ""
 msgid ""
 "With many graphics cards, basic functionality is available without "
 "additional firmware, but the use of advanced features requires an "
-"appropriate firmware file to be installed in the system. In some cases, a "
-"successful installation can still end up in a black screen or garbled "
-"display when rebooting into the installed system. If that happens, some "
-"workarounds can be tried to log in anyway (see <xref linkend=\"completing-"
-"installed-system\"/>)."
+"appropriate firmware file to be installed in the system."
 msgstr ""
-"Med mange grafikkort, er basisfunktionalitet tilgængelig uden yderligere "
-"firmware, men brugen af avancerede funktioner kræver, at en passende "
-"firmware-fil installeres på systemet. I nogle tilfælde kan en succesfuld "
-"installation stadig ende med en sort skærm eller en rodet visning ved "
-"opstart i det installerede system. Hvis dette sker, kan man prøve at omgå "
-"dette ved logind alligevel (se <xref linkend=\"completing-installed-system\"/"
-">)."
 
 #. Tag: para
-#: hardware.xml:1636
+#: hardware.xml:1631
 #, no-c-format
 msgid ""
 "On many older devices which require firmware to work, the firmware file was "
@@ -1909,15 +1898,22 @@ msgstr ""
 "hver gang systemet starter op."
 
 #. Tag: para
-#: hardware.xml:1644
-#, no-c-format
+#: hardware.xml:1639
+#, fuzzy, no-c-format
+#| msgid ""
+#| "In most cases firmware is non-free according to the criteria used by the "
+#| "&debian-gnu; project and thus cannot be included in the main distribution "
+#| "or in the installation system. If the device driver itself is included in "
+#| "the distribution and if &debian-gnu; legally can distribute the firmware, "
+#| "it will often be available as a separate package from the non-free "
+#| "section of the archive."
 msgid ""
 "In most cases firmware is non-free according to the criteria used by the "
-"&debian-gnu; project and thus cannot be included in the main distribution or "
-"in the installation system. If the device driver itself is included in the "
-"distribution and if &debian-gnu; legally can distribute the firmware, it "
-"will often be available as a separate package from the non-free section of "
-"the archive."
+"&debian-gnu; project and thus cannot be included in the main distribution. "
+"If the device driver itself is included in the distribution and if &debian-"
+"gnu; legally can distribute the firmware, it will often be available as a "
+"separate package from the non-free-firmware section of the archive (prior to "
+"&debian-gnu; 12.0: from the non-free section)."
 msgstr ""
 "I de fleste tilfælde er firmware ikke fri jævnfør de kriterier som bruges af "
 "&debian-gnu;-projektet og kan derfor ikke inkluderes i hoveddistributionen "
@@ -1927,15 +1923,47 @@ msgstr ""
 "del af arkivet."
 
 #. Tag: para
-#: hardware.xml:1653
+#: hardware.xml:1648
+#, no-c-format
+msgid ""
+"However, this does not mean that such hardware cannot be used during "
+"installation. Starting with &debian-gnu; 12.0, following the <ulink url="
+"\"https://www.debian.org/vote/2022/vote_003\">2022 General Resolution about "
+"non-free firmware</ulink>, official installation images can include non-free "
+"firmware packages. By default, &d-i; will detect required firmware (based on "
+"kernel logs and modalias information), and install the relevant packages if "
+"they are found on an installation medium (e.g. on the netinst). The package "
+"manager gets automatically configured with the matching components so that "
+"those packages get security updates. This usually means that the non-free-"
+"firmware component gets enabled, in addition to main."
+msgstr ""
+
+#. Tag: para
+#: hardware.xml:1662
 #, no-c-format
 msgid ""
-"However, this does not mean that such hardware cannot be used during an "
-"installation. Starting with &debian-gnu; 5.0, &d-i; supports loading "
+"Users who wish to disable firmware lookup entirely can do so by setting the "
+"<userinput>firmware=never</userinput> boot parameter. It's an alias for the "
+"longer <userinput>hw-detect/firmware-lookup=never</userinput> form."
+msgstr ""
+
+#. Tag: para
+#: hardware.xml:1669
+#, fuzzy, no-c-format
+#| msgid ""
+#| "However, this does not mean that such hardware cannot be used during an "
+#| "installation. Starting with &debian-gnu; 5.0, &d-i; supports loading "
+#| "firmware files or packages containing firmware from a removable medium, "
+#| "such as a USB stick. See <xref linkend=\"loading-firmware\"/> for "
+#| "detailed information on how to load firmware files or packages during the "
+#| "installation."
+msgid ""
+"Unless firmware lookup is disabled entirely, &d-i; still supports loading "
 "firmware files or packages containing firmware from a removable medium, such "
 "as a USB stick. See <xref linkend=\"loading-firmware\"/> for detailed "
 "information on how to load firmware files or packages during the "
-"installation."
+"installation. Note that &d-i; is less likely to prompt for firmware files "
+"now that non-free firmware packages can be included on installation images."
 msgstr ""
 "Dette betyder dog ikke at sådant udstyr ikke kan bruges under en "
 "installation. Startende med &debian-gnu; 5.0 understøtter &d-i; indlæsning "
@@ -1945,7 +1973,7 @@ msgstr ""
 "installationen."
 
 #. Tag: para
-#: hardware.xml:1662
+#: hardware.xml:1680
 #, no-c-format
 msgid ""
 "If the &d-i; prompts for a firmware file and you do not have this firmware "
@@ -1965,13 +1993,13 @@ msgstr ""
 "driveren)."
 
 #. Tag: title
-#: hardware.xml:1679
+#: hardware.xml:1697
 #, no-c-format
 msgid "Purchasing Hardware Specifically for GNU/&arch-kernel;"
 msgstr "Køb af udstyr specifikt for GNU/&arch-kernel;"
 
 #. Tag: para
-#: hardware.xml:1681
+#: hardware.xml:1699
 #, no-c-format
 msgid ""
 "There are several vendors, who ship systems with &debian; or other "
@@ -1987,7 +2015,7 @@ msgstr ""
 "understøttet af GNU/Linux."
 
 #. Tag: para
-#: hardware.xml:1689
+#: hardware.xml:1707
 #, no-c-format
 msgid ""
 "If you do have to buy a machine with Windows bundled, carefully read the "
@@ -2003,7 +2031,7 @@ msgstr ""
 "at hjælpe med det."
 
 #. Tag: para
-#: hardware.xml:1697
+#: hardware.xml:1715
 #, no-c-format
 msgid ""
 "Whether or not you are purchasing a system with &arch-kernel; bundled, or "
@@ -2021,13 +2049,13 @@ msgstr ""
 "udstyrsleverandører."
 
 #. Tag: title
-#: hardware.xml:1708
+#: hardware.xml:1726
 #, no-c-format
 msgid "Avoid Proprietary or Closed Hardware"
 msgstr "Undgå proprietær eller lukket udstyr"
 
 #. Tag: para
-#: hardware.xml:1709
+#: hardware.xml:1727
 #, no-c-format
 msgid ""
 "Some hardware manufacturers simply won't tell us how to write drivers for "
@@ -2045,7 +2073,7 @@ msgstr ""
 "vil de ikke fungere under &arch-kernel;."
 
 #. Tag: para
-#: hardware.xml:1719
+#: hardware.xml:1737
 #, no-c-format
 msgid ""
 "In many cases there are standards (or at least some de-facto standards) "
@@ -2068,7 +2096,7 @@ msgstr ""
 "praktisk talt alle enheder solgt på markedet overholder standarderne."
 
 #. Tag: para
-#: hardware.xml:1731
+#: hardware.xml:1749
 #, no-c-format
 msgid ""
 "In other fields, among them e.g. printers, this is unfortunately not the "
@@ -2089,7 +2117,7 @@ msgstr ""
 "eller kun kan bruges med en leverandørdriver i lukket kildekode."
 
 #. Tag: para
-#: hardware.xml:1742
+#: hardware.xml:1760
 #, no-c-format
 msgid ""
 "Even if there is a vendor-provided closed-source driver for such hardware "
@@ -2116,7 +2144,7 @@ msgstr ""
 "det."
 
 #. Tag: para
-#: hardware.xml:1755
+#: hardware.xml:1773
 #, no-c-format
 msgid ""
 "You can help improve this situation by encouraging manufacturers of closed "
@@ -2128,13 +2156,13 @@ msgstr ""
 "for at vi kan tilbyde frie drivere til deres udstyr."
 
 #. Tag: title
-#: hardware.xml:1770
+#: hardware.xml:1788
 #, no-c-format
 msgid "Installation Media"
 msgstr "Installationsmedie"
 
 #. Tag: para
-#: hardware.xml:1772
+#: hardware.xml:1790
 #, no-c-format
 msgid ""
 "This section will help you determine which different media types you can use "
@@ -2150,20 +2178,20 @@ msgstr ""
 "det afsnit."
 
 #. Tag: title
-#: hardware.xml:1782
+#: hardware.xml:1800
 #, no-c-format
 msgid "CD-ROM/DVD-ROM/BD-ROM"
 msgstr "Cd-rom/dvd-rom/bd-rom"
 
 #. Tag: para
-#: hardware.xml:1784
+#: hardware.xml:1802
 #, no-c-format
 msgid "Installation from optical disc is supported for most architectures."
 msgstr ""
 "Installation fra optisk disk er understøttet for de fleste arkitekturer."
 
 #. Tag: para
-#: hardware.xml:1788
+#: hardware.xml:1806
 #, no-c-format
 msgid ""
 "On PCs SATA, IDE/ATAPI, USB and SCSI optical drives are supported, as are "
@@ -2173,13 +2201,13 @@ msgstr ""
 "samt FireWire-enheder som er understøttet af ohci1394- og sbp2-drivere."
 
 #. Tag: title
-#: hardware.xml:1805
+#: hardware.xml:1823
 #, no-c-format
 msgid "USB Memory Stick"
 msgstr "USB-hukommelsesdrev"
 
 #. Tag: para
-#: hardware.xml:1807
+#: hardware.xml:1825
 #, no-c-format
 msgid ""
 "USB flash disks a.k.a. USB memory sticks have become a commonly used and "
@@ -2196,13 +2224,13 @@ msgstr ""
 "standardmåden at installere et nyt operativsystem."
 
 #. Tag: title
-#: hardware.xml:1819
+#: hardware.xml:1837
 #, no-c-format
 msgid "Network"
 msgstr "Netværk"
 
 #. Tag: para
-#: hardware.xml:1821
+#: hardware.xml:1839
 #, no-c-format
 msgid ""
 "The network can be used during the installation to retrieve files needed for "
@@ -2222,7 +2250,7 @@ msgstr ""
 "konfigurere dit system til at bruge ISDN og PPP."
 
 #. Tag: para
-#: hardware.xml:1831
+#: hardware.xml:1849
 #, no-c-format
 msgid ""
 "You can also <emphasis>boot</emphasis> the installation system over the "
@@ -2244,7 +2272,7 @@ msgstr ""
 "installationsteknik for &arch-title;.</phrase>"
 
 #. Tag: para
-#: hardware.xml:1844
+#: hardware.xml:1862
 #, no-c-format
 msgid ""
 "Diskless installation, using network booting from a local area network and "
@@ -2254,13 +2282,13 @@ msgstr ""
 "montering af alle lokale filsystemer, er en anden mulighed."
 
 #. Tag: title
-#: hardware.xml:1853
+#: hardware.xml:1871
 #, no-c-format
 msgid "Hard Disk"
 msgstr "Harddisk"
 
 #. Tag: para
-#: hardware.xml:1855
+#: hardware.xml:1873
 #, no-c-format
 msgid ""
 "Booting the installation system directly from a hard disk is another option "
@@ -2274,13 +2302,13 @@ msgstr ""
 "specielle tilfælde, hvor ingen anden installationsmetode er tilgængelig."
 
 #. Tag: title
-#: hardware.xml:1867
+#: hardware.xml:1885
 #, no-c-format
 msgid "Un*x or GNU system"
 msgstr "Un*x eller GNU-system"
 
 #. Tag: para
-#: hardware.xml:1869
+#: hardware.xml:1887
 #, no-c-format
 msgid ""
 "If you are running another Unix-like system, you could use it to install "
@@ -2300,13 +2328,13 @@ msgstr ""
 "andre installationsmetoder er tilgængelige."
 
 #. Tag: title
-#: hardware.xml:1882
+#: hardware.xml:1900
 #, no-c-format
 msgid "Supported Storage Systems"
 msgstr "Understøttede lagersystemer"
 
 #. Tag: para
-#: hardware.xml:1884
+#: hardware.xml:1902
 #, no-c-format
 msgid ""
 "The &debian; installer contains a kernel which is built to maximize the "
@@ -2316,7 +2344,7 @@ msgstr ""
 "maksimere antallet af systemer det kan køre på."
 
 #. Tag: para
-#: hardware.xml:1888
+#: hardware.xml:1906
 #, no-c-format
 msgid ""
 "Generally, the &debian; installation system includes support for IDE (also "
@@ -2330,13 +2358,13 @@ msgstr ""
 "(VFAT) og NTFS."
 
 #. Tag: para
-#: hardware.xml:1905
+#: hardware.xml:1923
 #, no-c-format
 msgid "IDE systems are also supported."
 msgstr "IDE-systemer er også understøttet."
 
 #. Tag: para
-#: hardware.xml:1915
+#: hardware.xml:1933
 #, no-c-format
 msgid ""
 "Any storage system supported by the Linux kernel is also supported by the "
@@ -2346,7 +2374,7 @@ msgstr ""
 "opstartssystemet."
 
 #. Tag: para
-#: hardware.xml:1920
+#: hardware.xml:1938
 #, no-c-format
 msgid ""
 "Any storage system supported by the Linux kernel is also supported by the "
@@ -2358,13 +2386,13 @@ msgstr ""
 "det gamle Linux-disklayout (ldl) og det nye fælles S/390-disklayout (cdl)."
 
 #. Tag: title
-#: hardware.xml:1937
+#: hardware.xml:1955
 #, no-c-format
 msgid "Memory and Disk Space Requirements"
 msgstr "Hukommelses- og diskpladskrav"
 
 #. Tag: para
-#: hardware.xml:1939
+#: hardware.xml:1957
 #, no-c-format
 msgid ""
 "You must have at least &minimum-memory; of memory and &minimum-fs-size; of "
@@ -2378,7 +2406,7 @@ msgstr ""
 "\"minimum-hardware-reqts\"/>."
 
 #. Tag: para
-#: hardware.xml:1946
+#: hardware.xml:1964
 #, no-c-format
 msgid ""
 "The installer normally automatically enables memory-saving tricks to be able "
@@ -2396,7 +2424,7 @@ msgstr ""
 "\"lowmem\"/> and <xref linkend=\"installer-args\"/>)."
 
 #. Tag: para
-#: hardware.xml:1955
+#: hardware.xml:1973
 #, no-c-format
 msgid ""
 "On &architecture; the lowmem levels have not been tested, so automatic "
@@ -2409,7 +2437,7 @@ msgstr ""
 "har lav hukommelse."
 
 #. Tag: para
-#: hardware.xml:1961
+#: hardware.xml:1979
 #, no-c-format
 msgid ""
 "Installation on systems with less memory<footnote condition=\"gtk\"> <para> "
@@ -2428,3 +2456,20 @@ msgstr ""
 "tekstbaserede og det grafiske installationsprogram, så bør den første "
 "vælges. </para> </footnote> eller diskplads kan lade sig gøre, men tilrådes "
 "kun for erfarne brugere."
+
+#~ msgid ""
+#~ "With many graphics cards, basic functionality is available without "
+#~ "additional firmware, but the use of advanced features requires an "
+#~ "appropriate firmware file to be installed in the system. In some cases, a "
+#~ "successful installation can still end up in a black screen or garbled "
+#~ "display when rebooting into the installed system. If that happens, some "
+#~ "workarounds can be tried to log in anyway (see <xref linkend=\"completing-"
+#~ "installed-system\"/>)."
+#~ msgstr ""
+#~ "Med mange grafikkort, er basisfunktionalitet tilgængelig uden yderligere "
+#~ "firmware, men brugen af avancerede funktioner kræver, at en passende "
+#~ "firmware-fil installeres på systemet. I nogle tilfælde kan en succesfuld "
+#~ "installation stadig ende med en sort skærm eller en rodet visning ved "
+#~ "opstart i det installerede system. Hvis dette sker, kan man prøve at omgå "
+#~ "dette ved logind alligevel (se <xref linkend=\"completing-installed-system"
+#~ "\"/>)."
diff --git a/po/da/post-install.po b/po/da/post-install.po
index 4a50c2cc5..60d4ff3ea 100644
--- a/po/da/post-install.po
+++ b/po/da/post-install.po
@@ -18,7 +18,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_post-install\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-08-11 15:17+0000\n"
+"POT-Creation-Date: 2023-02-15 23:04+0000\n"
 "PO-Revision-Date: 2022-07-08 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -160,15 +160,23 @@ msgstr ""
 
 #. Tag: para
 #: post-install.xml:114
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "One of the best installation methods is apt. You can use the command line "
+#| "version of <command>apt</command> as well as tools like "
+#| "<application>aptitude</application> or <application>synaptic</"
+#| "application> (which are just graphical frontends for <command>apt</"
+#| "command>). Note that apt will also let you merge main, contrib, and non-"
+#| "free so you can have restricted packages (strictly speaking not belonging "
+#| "to &debian;) as well as packages from &debian-gnu; at the same time."
 msgid ""
 "One of the best installation methods is apt. You can use the command line "
 "version of <command>apt</command> as well as tools like "
 "<application>aptitude</application> or <application>synaptic</application> "
 "(which are just graphical frontends for <command>apt</command>). Note that "
-"apt will also let you merge main, contrib, and non-free so you can have "
-"restricted packages (strictly speaking not belonging to &debian;) as well as "
-"packages from &debian-gnu; at the same time."
+"apt will also let you merge main, contrib, non-free, and non-free-firmware "
+"so you can have restricted packages (strictly speaking not belonging to "
+"&debian;) as well as packages from &debian-gnu; at the same time."
 msgstr ""
 "En af de bedste installationsmetoder er apt. Du kan bruge versionen for "
 "kommandolinjen <command>apt</command> eller værktøjer såsom "
diff --git a/po/da/preseed.po b/po/da/preseed.po
index 6294b7cf6..92526a6b2 100644
--- a/po/da/preseed.po
+++ b/po/da/preseed.po
@@ -19,7 +19,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_preseed\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2022-10-11 23:04+0000\n"
+"POT-Creation-Date: 2023-02-15 23:04+0000\n"
 "PO-Revision-Date: 2022-07-09 19:33+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -1714,7 +1714,81 @@ msgstr "De følgende debconf-variabler er relevante for netværkskonfiguration."
 
 #. Tag: screen
 #: preseed.xml:837
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "# Disable network configuration entirely. This is useful for cdrom\n"
+#| "# installations on non-networked devices where the network questions,\n"
+#| "# warning and long timeouts are a nuisance.\n"
+#| "#d-i netcfg/enable boolean false\n"
+#| "\n"
+#| "# netcfg will choose an interface that has link if possible. This makes "
+#| "it\n"
+#| "# skip displaying a list if there is more than one interface.\n"
+#| "d-i netcfg/choose_interface select auto\n"
+#| "\n"
+#| "# To pick a particular interface instead:\n"
+#| "#d-i netcfg/choose_interface select eth1\n"
+#| "\n"
+#| "# To set a different link detection timeout (default is 3 seconds).\n"
+#| "# Values are interpreted as seconds.\n"
+#| "#d-i netcfg/link_wait_timeout string 10\n"
+#| "\n"
+#| "# If you have a slow dhcp server and the installer times out waiting for\n"
+#| "# it, this might be useful.\n"
+#| "#d-i netcfg/dhcp_timeout string 60\n"
+#| "#d-i netcfg/dhcpv6_timeout string 60\n"
+#| "\n"
+#| "# Automatic network configuration is the default.\n"
+#| "# If you prefer to configure the network manually, uncomment this line "
+#| "and\n"
+#| "# the static network configuration below.\n"
+#| "#d-i netcfg/disable_autoconfig boolean true\n"
+#| "\n"
+#| "# If you want the preconfiguration file to work on systems both with and\n"
+#| "# without a dhcp server, uncomment these lines and the static network\n"
+#| "# configuration below.\n"
+#| "#d-i netcfg/dhcp_failed note\n"
+#| "#d-i netcfg/dhcp_options select Configure network manually\n"
+#| "\n"
+#| "# Static network configuration.\n"
+#| "#\n"
+#| "# IPv4 example\n"
+#| "#d-i netcfg/get_ipaddress string 192.168.1.42\n"
+#| "#d-i netcfg/get_netmask string 255.255.255.0\n"
+#| "#d-i netcfg/get_gateway string 192.168.1.1\n"
+#| "#d-i netcfg/get_nameservers string 192.168.1.1\n"
+#| "#d-i netcfg/confirm_static boolean true\n"
+#| "#\n"
+#| "# IPv6 example\n"
+#| "#d-i netcfg/get_ipaddress string fc00::2\n"
+#| "#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::\n"
+#| "#d-i netcfg/get_gateway string fc00::1\n"
+#| "#d-i netcfg/get_nameservers string fc00::1\n"
+#| "#d-i netcfg/confirm_static boolean true\n"
+#| "\n"
+#| "# Any hostname and domain names assigned from dhcp take precedence over\n"
+#| "# values set here. However, setting the values still prevents the "
+#| "questions\n"
+#| "# from being shown, even if values come from dhcp.\n"
+#| "d-i netcfg/get_hostname string unassigned-hostname\n"
+#| "d-i netcfg/get_domain string unassigned-domain\n"
+#| "\n"
+#| "# If you want to force a hostname, regardless of what either the DHCP\n"
+#| "# server returns or what the reverse DNS entry for the IP is, uncomment\n"
+#| "# and adjust the following line.\n"
+#| "#d-i netcfg/hostname string somehost\n"
+#| "\n"
+#| "# Disable that annoying WEP key dialog.\n"
+#| "d-i netcfg/wireless_wep string\n"
+#| "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
+#| "#d-i netcfg/dhcp_hostname string radish\n"
+#| "\n"
+#| "# If non-free firmware is needed for the network or other hardware, you "
+#| "can\n"
+#| "# configure the installer to always try to load it, without prompting. "
+#| "Or\n"
+#| "# change to false to disable asking.\n"
+#| "#d-i hw-detect/load_firmware boolean true"
 msgid ""
 "# Disable network configuration entirely. This is useful for cdrom\n"
 "# installations on non-networked devices where the network questions,\n"
@@ -1780,6 +1854,10 @@ msgid ""
 "# The wacky dhcp hostname that some ISPs use as a password of sorts.\n"
 "#d-i netcfg/dhcp_hostname string radish\n"
 "\n"
+"# If you want to completely disable firmware lookup (i.e. not use firmware\n"
+"# files or packages that might be available on installation images):\n"
+"#d-i hw-detect/firmware-lookup string never\n"
+"\n"
 "# If non-free firmware is needed for the network or other hardware, you can\n"
 "# configure the installer to always try to load it, without prompting. Or\n"
 "# change to false to disable asking.\n"
@@ -2669,6 +2747,8 @@ msgid ""
 "# Choose, if you want to scan additional installation media\n"
 "# (default: false).\n"
 "d-i apt-setup/cdrom/set-first boolean false\n"
+"# You can choose to install non-free firmware.\n"
+"#d-i apt-setup/non-free-firmware boolean true\n"
 "# You can choose to install non-free and contrib software.\n"
 "#d-i apt-setup/non-free boolean true\n"
 "#d-i apt-setup/contrib boolean true\n"
diff --git a/po/da/using-d-i.po b/po/da/using-d-i.po
index 8152a947f..755cbaf5a 100644
--- a/po/da/using-d-i.po
+++ b/po/da/using-d-i.po
@@ -17,7 +17,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: installation-guide using d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2022-05-19 22:02+0000\n"
+"POT-Creation-Date: 2023-02-15 23:04+0000\n"
 "PO-Revision-Date: 2022-07-08 19:32+0000\n"
 "Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
 "Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
@@ -3844,13 +3844,19 @@ msgstr ""
 
 #. Tag: para
 #: using-d-i.xml:2301
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you are installing at a lower priority (e.g. in expert mode), you will "
+#| "be able to make more decisions yourself. You can choose whether or not to "
+#| "use the security and/or stable-updates services, and you can choose to "
+#| "add packages from the <quote>contrib</quote> and <quote>non-free</quote> "
+#| "sections of the archive."
 msgid ""
 "If you are installing at a lower priority (e.g. in expert mode), you will be "
 "able to make more decisions yourself. You can choose whether or not to use "
 "the security and/or stable-updates services, and you can choose to add "
-"packages from the <quote>contrib</quote> and <quote>non-free</quote> "
-"sections of the archive."
+"packages from the <quote>contrib</quote>, <quote>non-free</quote>, and "
+"<quote>non-free-firmware</quote> sections of the archive."
 msgstr ""
 "Hvis du installerer med en lavere prioritet (f.eks. i eksperttilstand), så "
 "vil du selv kunne foretage flere beslutninger. Du kan vælge hvorvidt "
@@ -5133,6 +5139,18 @@ msgstr ""
 #: using-d-i.xml:3102
 #, no-c-format
 msgid ""
+"Starting with &debian-gnu; 12.0, following the <ulink url=\"https://www."
+"debian.org/vote/2022/vote_003\">2022 General Resolution about non-free "
+"firmware</ulink>, official installation images (like netinst) can include "
+"non-free firmware packages. Even with those firmware packages available, "
+"some firmware files might still be missing. Or one might be using netboot "
+"files, which don't include firmware packages."
+msgstr ""
+
+#. Tag: para
+#: using-d-i.xml:3113
+#, no-c-format
+msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
 "display a dialog offering to load the missing firmware. If this option is "
 "selected, &d-i; will scan available devices for either loose firmware files "
@@ -5148,7 +5166,7 @@ msgstr ""
 "firmware</filename>) og drivermodulet vil blive genindlæst."
 
 #. Tag: para
-#: using-d-i.xml:3112
+#: using-d-i.xml:3123
 #, no-c-format
 msgid ""
 "Which devices are scanned and which file systems are supported depends on "
@@ -5166,7 +5184,7 @@ msgstr ""
 "også indlæses fra et MMC- eller SD-kort.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3122
+#: using-d-i.xml:3133
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -5177,48 +5195,33 @@ msgstr ""
 "enheden også vil fungere uden den, eller hvis enheden ikke er krævet under "
 "installationen."
 
-#. Tag: para
-#: using-d-i.xml:3128
-#, no-c-format
-msgid ""
-"&d-i; only prompts for firmware needed by kernel modules loaded during the "
-"installation. Not all drivers are included in &d-i;, in particular radeon is "
-"not, so this implies that the capabilities of some devices may be no "
-"different at the end of the installation from what they were at the "
-"beginning. Consequently, some of your hardware may not be being used to its "
-"full potential. If you suspect this is the case, or are just curious, it is "
-"not a bad idea to check the output of the <command>dmesg</command> command "
-"on the newly booted system and search for <quote>firmware</quote>."
-msgstr ""
-"&d-i; spørger kun efter firmware krævet af kernemoduler indlæst under "
-"installationen. Ikke alle drivere er inkluderet i %d-i;, bemærk at radeon "
-"ikke er, så dette gør at funktionerne på nogle enheder ikke er anderledes "
-"ved slutningen af installationen end de var ved begyndelsen. Konsekvensen "
-"kan være, at noget af dit udstyr ikke bliver brugt i sit fulde potentiale. "
-"Hvis du har mistanke om, at dette er tilfældet, eller bare er nysgerrig, så "
-"er det en god ide at kigge på resultatet af kommandoen <command>dmesg</"
-"command> på det netop opstartede system og søge efter <quote>firmware</"
-"quote>."
-
 #. Tag: title
-#: using-d-i.xml:3142
+#: using-d-i.xml:3141
 #, no-c-format
 msgid "Preparing a medium"
 msgstr "Forberedelse af et medie"
 
 #. Tag: para
-#: using-d-i.xml:3143
-#, no-c-format
-msgid ""
-"Official installation images do not include non-free firmware. The most "
-"common method to load such firmware is from some removable medium such as a "
-"USB stick. Alternatively, unofficial installation images containing non-free "
-"firmware can be found at <ulink url=\"&url-firmware-cds;\"></ulink>. To "
-"prepare a USB stick (or other medium like a hard drive partition), the "
-"firmware files or packages must be placed in either the root directory or a "
-"directory named <filename>/firmware</filename> of the file system on the "
-"medium. The recommended file system to use is FAT as that is most certain to "
-"be supported during the early stages of the installation."
+#: using-d-i.xml:3142
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Official installation images do not include non-free firmware. The most "
+#| "common method to load such firmware is from some removable medium such as "
+#| "a USB stick. Alternatively, unofficial installation images containing non-"
+#| "free firmware can be found at <ulink url=\"&url-firmware-cds;\"></ulink>. "
+#| "To prepare a USB stick (or other medium like a hard drive partition), the "
+#| "firmware files or packages must be placed in either the root directory or "
+#| "a directory named <filename>/firmware</filename> of the file system on "
+#| "the medium. The recommended file system to use is FAT as that is most "
+#| "certain to be supported during the early stages of the installation."
+msgid ""
+"The most common method to load such firmware is from some removable medium "
+"such as a USB stick. To prepare a USB stick (or other medium like a hard "
+"drive partition), the firmware files or packages must be placed in either "
+"the root directory or a directory named <filename>/firmware</filename> of "
+"the file system on the medium. The recommended file system to use is FAT as "
+"that is most certain to be supported during the early stages of the "
+"installation."
 msgstr ""
 "Officielle installationsaftryk inkluderer ikke ikke-fri firmware. Den mest "
 "anvendte metode er at indlæse sådan firmware fra nogle eksterne medier såsom "
@@ -5231,14 +5234,21 @@ msgstr ""
 "sandsynligt, at det understøttes i de tidlige stadier af installationen."
 
 #. Tag: para
-#: using-d-i.xml:3156
-#, no-c-format
+#: using-d-i.xml:3154
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Tarballs and zip files containing current packages for the most common "
+#| "firmware are available from: <itemizedlist> <listitem><para> <ulink url="
+#| "\"&url-firmware-tarballs;\"></ulink> </para></listitem> </itemizedlist> "
+#| "Just download the tarball or zip file for the correct release and unpack "
+#| "it to the file system on the medium."
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
-"firmware are available from: <itemizedlist> <listitem><para> <ulink url="
-"\"&url-firmware-tarballs;\"></ulink> </para></listitem> </itemizedlist> Just "
-"download the tarball or zip file for the correct release and unpack it to "
-"the file system on the medium."
+"firmware, and the associated metadata to ensure a proper detection by the "
+"installer (<filename>dep11</filename> directory), are available from: "
+"<itemizedlist> <listitem><para> <ulink url=\"&url-firmware-tarballs;\"></"
+"ulink> </para></listitem> </itemizedlist> Just download the tarball or zip "
+"file for the correct release and unpack it to the file system on the medium."
 msgstr ""
 "Tarball'er og zip-filer indeholdende nuværende pakker for den mest anvendte "
 "firmware er tilgængelige fra: <itemizedlist> <listitem><para> <ulink url="
@@ -5247,23 +5257,7 @@ msgstr ""
 "filsystemet på mediet."
 
 #. Tag: para
-#: using-d-i.xml:3170
-#, no-c-format
-msgid ""
-"If the firmware you need is not included in the tarball, you can also "
-"download specific firmware packages from the (non-free section of the) "
-"archive. The following overview should list most available firmware packages "
-"but is not guaranteed to be complete and may also contain non-firmware "
-"packages:"
-msgstr ""
-"Hvis firmwaren du har brug for ikke er inkluderet i tarball'en, så kan du "
-"også hente specifikke firmwwarepakker fra (den ikke frie sektion af) "
-"arkivet. Det følgende overblik bør vise de mest tilgængelige firmwarepakker "
-"men er ikke garanteret fuldstændighed og kan også inkludere ikke-"
-"firmwarepakker:"
-
-#. Tag: para
-#: using-d-i.xml:3184
+#: using-d-i.xml:3169
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -5275,13 +5269,13 @@ msgstr ""
 "eller fra en udstyrsleverandør."
 
 #. Tag: title
-#: using-d-i.xml:3193
+#: using-d-i.xml:3178
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr "Firmware og det installerede system"
 
 #. Tag: para
-#: using-d-i.xml:3194
+#: using-d-i.xml:3179
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -5299,13 +5293,19 @@ msgstr ""
 "firmwaren ikke kan indlæses på grund af forskellene i versionerne."
 
 #. Tag: para
-#: using-d-i.xml:3203
-#, no-c-format
+#: using-d-i.xml:3188
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If the firmware was loaded from a firmware package, &d-i; will also "
+#| "install this package for the installed system and will automatically add "
+#| "the non-free section of the package archive in APT's <filename>sources."
+#| "list</filename>. This has the advantage that the firmware should be "
+#| "updated automatically if a new version becomes available."
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
 "this package for the installed system and will automatically add the non-"
-"free section of the package archive in APT's <filename>sources.list</"
-"filename>. This has the advantage that the firmware should be updated "
+"free-firmware section of the package archive in APT's <filename>sources."
+"list</filename>. This has the advantage that the firmware should be updated "
 "automatically if a new version becomes available."
 msgstr ""
 "Hvis firmwaren blev indlæst fra en firmwarepakke vil &d-i; også installere "
@@ -5315,7 +5315,7 @@ msgstr ""
 "version bliver tilgængelig."
 
 #. Tag: para
-#: using-d-i.xml:3211
+#: using-d-i.xml:3196
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -5327,7 +5327,7 @@ msgstr ""
 "firmwaren (pakke) er installeret manuelt."
 
 #. Tag: para
-#: using-d-i.xml:3218
+#: using-d-i.xml:3203
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "
@@ -5341,13 +5341,13 @@ msgstr ""
 "installeres efter installationen er færdig."
 
 #. Tag: title
-#: using-d-i.xml:3228
+#: using-d-i.xml:3213
 #, no-c-format
 msgid "Completing the Installed System"
 msgstr "Gør det installerede system færdigt"
 
 #. Tag: para
-#: using-d-i.xml:3229
+#: using-d-i.xml:3214
 #, no-c-format
 msgid ""
 "Depending on how the installation was performed, it might be that the need "
@@ -5366,7 +5366,7 @@ msgstr ""
 "følgende løsninger forsøges:"
 
 #. Tag: para
-#: using-d-i.xml:3243
+#: using-d-i.xml:3228
 #, no-c-format
 msgid ""
 "Pass the <code>nomodeset</code> option on the kernel command line. This "
@@ -5376,7 +5376,7 @@ msgstr ""
 "måske hjælpe med at starte op i en <quote>grafisk reservetilstand</quote>."
 
 #. Tag: para
-#: using-d-i.xml:3247
+#: using-d-i.xml:3232
 #, no-c-format
 msgid ""
 "Use the <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</"
@@ -5387,72 +5387,14 @@ msgstr ""
 "keycap><keycap>F2</keycap></keycombo> for at skifte til VT2, der kan tilbyde "
 "en funktionel logind-prompt."
 
-#. Tag: para
-#: using-d-i.xml:3253
-#, no-c-format
-msgid ""
-"Once logged in into the installed system, it is possible to automate the "
-"detection of missing firmware, and to perform the required steps to enable "
-"them following this procedure:"
-msgstr ""
-"Når logget ind på det installerede system, er det muligt at automatisere "
-"registreringen af manglende firmware og udføre de krævede trin for at "
-"aktivere dem via denne procedure:"
-
-#. Tag: para
-#: using-d-i.xml:3260
-#, no-c-format
-msgid "Install the <classname>isenkram-cli</classname> package."
-msgstr "Installer pakken <classname>isenkram-cli</classname>."
-
-#. Tag: para
-#: using-d-i.xml:3263
-#, no-c-format
-msgid ""
-"Run the <command>isenkram-autoinstall-firmware</command> command as the "
-"<quote>root</quote> user."
-msgstr ""
-"Afvikl kommandoen <command>isenkram-autoinstall-firmware</command> som "
-"<quote>root</quote>-bruger."
-
-#. Tag: para
-#: using-d-i.xml:3266
-#, no-c-format
-msgid ""
-"Usually, rebooting is the simplest way to make sure all kernel modules are "
-"properly initialized; that's particularly important when one has booted the "
-"system with the <code>nomodeset</code> option as an interim measure."
-msgstr ""
-"Normalt er en genstart den simpleste måde at sikre at alle kernemoduler er "
-"korrekt igangsat; det er specielt vigtigt når man har startet systemet op "
-"med tilvalget <code>nomodeset</code> som en midlertidig foranstaltning."
-
-#. Tag: para
-#: using-d-i.xml:3273
-#, no-c-format
-msgid ""
-"Installing firmware packages is very likely to require enabling the non-free "
-"section of the package archive. As of &debian-gnu; 11.0, running the "
-"<command>isenkram-autoinstall-firmware</command> command will do that "
-"automatically by creating a dedicated file (<filename>/etc/apt/sources.list."
-"d/isenkram-autoinstall-firmware.list</filename>), pointing at a generic "
-"mirror."
-msgstr ""
-"Installation af firmwarepakker kræver med høj sandsynlighed aktivering af "
-"det ikke-frie afsnit af pakkearkivet. Fra og med &debian-gnu; 11.0, vil "
-"afvikling af kommandoen <command>isenkram-autoinstall-firmware</command> "
-"gøre dette automatisk ved at oprette en dedikeret fil (<filename>/etc/apt/"
-"sources.list.d/isenkram-autoinstall-firmware.list</filename>), der peger på "
-"et generisk spejl."
-
 #. Tag: title
-#: using-d-i.xml:3292
+#: using-d-i.xml:3245
 #, no-c-format
 msgid "Customization"
 msgstr "Tilpasning"
 
 #. Tag: para
-#: using-d-i.xml:3293
+#: using-d-i.xml:3246
 #, no-c-format
 msgid ""
 "Using the shell (see <xref linkend=\"shell\"/>), the installation process "
@@ -5462,13 +5404,13 @@ msgstr ""
 "installationsprocessen omhyggelig tilpasset til undtagelsestilfælde:"
 
 #. Tag: title
-#: using-d-i.xml:3298
+#: using-d-i.xml:3251
 #, no-c-format
 msgid "Installing an alternative init system"
 msgstr "Installation af et alternativt opstartssystem"
 
 #. Tag: para
-#: using-d-i.xml:3299
+#: using-d-i.xml:3252
 #, no-c-format
 msgid ""
 "&debian; uses systemd as its default init system. However, other init "
@@ -5487,6 +5429,83 @@ msgstr ""
 "wiki</ulink>."
 
 #~ msgid ""
+#~ "&d-i; only prompts for firmware needed by kernel modules loaded during "
+#~ "the installation. Not all drivers are included in &d-i;, in particular "
+#~ "radeon is not, so this implies that the capabilities of some devices may "
+#~ "be no different at the end of the installation from what they were at the "
+#~ "beginning. Consequently, some of your hardware may not be being used to "
+#~ "its full potential. If you suspect this is the case, or are just curious, "
+#~ "it is not a bad idea to check the output of the <command>dmesg</command> "
+#~ "command on the newly booted system and search for <quote>firmware</quote>."
+#~ msgstr ""
+#~ "&d-i; spørger kun efter firmware krævet af kernemoduler indlæst under "
+#~ "installationen. Ikke alle drivere er inkluderet i %d-i;, bemærk at radeon "
+#~ "ikke er, så dette gør at funktionerne på nogle enheder ikke er anderledes "
+#~ "ved slutningen af installationen end de var ved begyndelsen. Konsekvensen "
+#~ "kan være, at noget af dit udstyr ikke bliver brugt i sit fulde "
+#~ "potentiale. Hvis du har mistanke om, at dette er tilfældet, eller bare er "
+#~ "nysgerrig, så er det en god ide at kigge på resultatet af kommandoen "
+#~ "<command>dmesg</command> på det netop opstartede system og søge efter "
+#~ "<quote>firmware</quote>."
+
+#~ msgid ""
+#~ "If the firmware you need is not included in the tarball, you can also "
+#~ "download specific firmware packages from the (non-free section of the) "
+#~ "archive. The following overview should list most available firmware "
+#~ "packages but is not guaranteed to be complete and may also contain non-"
+#~ "firmware packages:"
+#~ msgstr ""
+#~ "Hvis firmwaren du har brug for ikke er inkluderet i tarball'en, så kan du "
+#~ "også hente specifikke firmwwarepakker fra (den ikke frie sektion af) "
+#~ "arkivet. Det følgende overblik bør vise de mest tilgængelige "
+#~ "firmwarepakker men er ikke garanteret fuldstændighed og kan også "
+#~ "inkludere ikke-firmwarepakker:"
+
+#~ msgid ""
+#~ "Once logged in into the installed system, it is possible to automate the "
+#~ "detection of missing firmware, and to perform the required steps to "
+#~ "enable them following this procedure:"
+#~ msgstr ""
+#~ "Når logget ind på det installerede system, er det muligt at automatisere "
+#~ "registreringen af manglende firmware og udføre de krævede trin for at "
+#~ "aktivere dem via denne procedure:"
+
+#~ msgid "Install the <classname>isenkram-cli</classname> package."
+#~ msgstr "Installer pakken <classname>isenkram-cli</classname>."
+
+#~ msgid ""
+#~ "Run the <command>isenkram-autoinstall-firmware</command> command as the "
+#~ "<quote>root</quote> user."
+#~ msgstr ""
+#~ "Afvikl kommandoen <command>isenkram-autoinstall-firmware</command> som "
+#~ "<quote>root</quote>-bruger."
+
+#~ msgid ""
+#~ "Usually, rebooting is the simplest way to make sure all kernel modules "
+#~ "are properly initialized; that's particularly important when one has "
+#~ "booted the system with the <code>nomodeset</code> option as an interim "
+#~ "measure."
+#~ msgstr ""
+#~ "Normalt er en genstart den simpleste måde at sikre at alle kernemoduler "
+#~ "er korrekt igangsat; det er specielt vigtigt når man har startet systemet "
+#~ "op med tilvalget <code>nomodeset</code> som en midlertidig foranstaltning."
+
+#~ msgid ""
+#~ "Installing firmware packages is very likely to require enabling the non-"
+#~ "free section of the package archive. As of &debian-gnu; 11.0, running the "
+#~ "<command>isenkram-autoinstall-firmware</command> command will do that "
+#~ "automatically by creating a dedicated file (<filename>/etc/apt/sources."
+#~ "list.d/isenkram-autoinstall-firmware.list</filename>), pointing at a "
+#~ "generic mirror."
+#~ msgstr ""
+#~ "Installation af firmwarepakker kræver med høj sandsynlighed aktivering af "
+#~ "det ikke-frie afsnit af pakkearkivet. Fra og med &debian-gnu; 11.0, vil "
+#~ "afvikling af kommandoen <command>isenkram-autoinstall-firmware</command> "
+#~ "gøre dette automatisk ved at oprette en dedikeret fil (<filename>/etc/apt/"
+#~ "sources.list.d/isenkram-autoinstall-firmware.list</filename>), der peger "
+#~ "på et generisk spejl."
+
+#~ msgid ""
 #~ "Allows the user to partition disks attached to the system. A partitioning "
 #~ "program appropriate to your computer's architecture is chosen."
 #~ msgstr ""