[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 0 insertions, 36 deletions

diff --git a/po/da/install-methods.po b/po/da/install-methods.po
index 42bcbb600..19b43be0b 100644
--- a/po/da/install-methods.po
+++ b/po/da/install-methods.po
@@ -1283,7 +1283,6 @@ msgstr ""
 "ovenstående procedure), samt instruktioner om hvordan integriteten for de "
 "ovenstående kontrolsummer verificeres."
 
-#, no-c-format
 #~ msgid ""
 #~ "Alternatively, for very small USB sticks, only a few megabytes in size, "
 #~ "you can download the &netboot-mini-iso; image from the <filename>netboot</"
@@ -1294,7 +1293,6 @@ msgstr ""
 #~ "aftrykket &netboot-mini-iso; fra mappen <filename>netboot</filename> (på "
 #~ "placeringen nævnt i <xref linkend=\"where-files\"/>)."
 
-#, no-c-format
 #~ msgid ""
 #~ "Simply writing the installation image to USB like this should work fine "
 #~ "for most users. The other options below are more complex, mainly for "
@@ -1304,7 +1302,6 @@ msgstr ""
 #~ "for de fleste brugere. De andre muligheder er mere komplekse og "
 #~ "hovedsagelig for folk med specielle behov."
 
-#, no-c-format
 #~ msgid ""
 #~ "The hybrid image on the stick does not occupy all the storage space, so "
 #~ "it may be worth considering using the free space to hold firmware files "
@@ -1317,7 +1314,6 @@ msgstr ""
 #~ "pakker eller andre filer efter dit eget valg. Dette kan være nyttigt, "
 #~ "hvis du kun har et drev eller bare ønsker at have alt på en enhed."
 
-#, no-c-format
 #~ msgid ""
 #~ "To do so, use cfdisk or any other partitioning tool to create an "
 #~ "additional partition on the stick. Then create a (FAT) filesystem on the "
@@ -1347,7 +1343,6 @@ msgstr ""
 #~ "USB-drev. Kommandoen <command>mkdosfs</command> er indeholdt i &debian;"
 #~ "pakken <classname>dosfstools</classname>."
 
-#, no-c-format
 #~ msgid ""
 #~ "If you have chosen the <filename>mini.iso</filename> to be written to the "
 #~ "USB stick, the second partition doesn't have to be created, as - very "
@@ -1359,11 +1354,9 @@ msgstr ""
 #~ "passende - allerede vil være til stede. Fjernelse og isættelse af USB-"
 #~ "drevet bør gøre de to partitioner synlige."
 
-#, no-c-format
 #~ msgid "Manually copying files to the USB stick"
 #~ msgstr "Manuelt kopiere filer til USB-drevet"
 
-#, no-c-format
 #~ msgid ""
 #~ "Prior to isohybrid technology being used for &debian; installation "
 #~ "images, the methods documented in the chapters below were used to prepare "
@@ -1379,7 +1372,6 @@ msgstr ""
 #~ "undervisningsmæssige og historiske formål, og i tilfælde af, at de skulle "
 #~ "være nyttig for nogle brugere."
 
-#, no-c-format
 #~ msgid ""
 #~ "An alternative to the method described in <xref linkend=\"usb-copy-"
 #~ "isohybrid\"/> is to manually copy the installer files, and also an "
@@ -1393,7 +1385,6 @@ msgstr ""
 #~ "GB (mindre opsætninger er mulige, hvis du bruger filerne fra netboot, "
 #~ "efter <xref linkend=\"usb-copy-flexible\"/>)."
 
-#, no-c-format
 #~ msgid ""
 #~ "There is an all-in-one file &hdmedia-boot-img; which contains all the "
 #~ "installer files (including the kernel)<phrase arch=\"x86\"> as well as "
@@ -1404,7 +1395,6 @@ msgstr ""
 #~ "\"x86\">samt <classname>syslinux</classname> og dets konfigurationsfil</"
 #~ "phrase>."
 
-#, no-c-format
 #~ msgid ""
 #~ "Note that, although convenient, this method does have one major "
 #~ "disadvantage: the logical size of the device will be limited to 1 GB, "
@@ -1418,15 +1408,12 @@ msgstr ""
 #~ "og oprette nye filsystemer for at få den fulde kapacitet tilbage, hvis du "
 #~ "ønsker at bruge den til andre formål."
 
-#, no-c-format
 #~ msgid "Simply extract this image directly to your USB stick:"
 #~ msgstr "Udtræk dette aftryk direkte til dit USB-drev:"
 
-#, no-c-format
 #~ msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 #~ msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
-#, no-c-format
 #~ msgid ""
 #~ "After that, mount the USB memory stick <phrase arch="
 #~ "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
@@ -1446,11 +1433,9 @@ msgstr ""
 #~ "(netinst eller fuld cd; se <xref linkend=\"official-cdrom\"/>) til den. "
 #~ "Afmonter drevet (<userinput>umount /mnt</userinput>) og du er færdig."
 
-#, no-c-format
 #~ msgid "Manually copying files to the USB stick &mdash; the flexible way"
 #~ msgstr "Manuelt kopiere filer til USB-drevet &mdash; den fleksible måde"
 
-#, no-c-format
 #~ msgid ""
 #~ "If you like more flexibility or just want to know what's going on, you "
 #~ "should use the following method to put the files on your stick. One "
@@ -1464,11 +1449,9 @@ msgstr ""
 #~ "kapaciteten på dit USB-drev er stor nok &mdash; så kan du kopiere ethvert "
 #~ "ISO-aftryk eller endda et dvd-aftryk til drevet."
 
-#, no-c-format
 #~ msgid "Partitioning and adding a boot loader"
 #~ msgstr "Partitionering og tilføjelse af en opstartsindlæser"
 
-#, no-c-format
 #~ msgid ""
 #~ "We will show how to set up the memory stick to use the first partition, "
 #~ "instead of the entire device."
@@ -1476,7 +1459,6 @@ msgstr ""
 #~ "Vi vil vise hvordan hukommelsesdrevet opsættes til at bruge den første "
 #~ "partition, i stedet for hele enheden."
 
-#, no-c-format
 #~ msgid ""
 #~ "In order to start the kernel after booting from the USB stick, we will "
 #~ "put a boot loader on the stick. Although any boot loader should work, "
@@ -1492,7 +1474,6 @@ msgstr ""
 #~ "tekstfil. Ethvert operativsystem som understøtter FAT-filsystemet kan "
 #~ "bruges til at lave ændringer til konfigurationen af opstartsindlæseren."
 
-#, no-c-format
 #~ msgid ""
 #~ "First, you need to install the <classname>syslinux</classname> and "
 #~ "<classname>mtools</classname> packages on your system."
@@ -1500,7 +1481,6 @@ msgstr ""
 #~ "Først skal du installere pakkerne <classname>syslinux</classname> og "
 #~ "<classname>mtools</classname> på dit system."
 
-#, no-c-format
 #~ msgid ""
 #~ "Since most USB sticks come pre-configured with a single FAT16 partition, "
 #~ "you probably won't have to repartition or reformat the stick. If you have "
@@ -1531,7 +1511,6 @@ msgstr ""
 #~ "enhedsnavn for dit USB-drev. Kommandoen <command>mkdosfs</command> er "
 #~ "indeholdt i &debian;-pakken <classname>dosfstools</classname>."
 
-#, no-c-format
 #~ msgid ""
 #~ "Having a correctly partitioned USB stick (now), you need to put "
 #~ "<classname>syslinux</classname> on the FAT16 partition with: "
@@ -1553,11 +1532,9 @@ msgstr ""
 #~ "opstartssektor til partionen og opretter filen <filename>ldlinux.sys</"
 #~ "filename>, som indeholder koden for opstartsindlæseren."
 
-#, no-c-format
 #~ msgid "Adding the installer files"
 #~ msgstr "Tilføjelse af installationsfilerne"
 
-#, no-c-format
 #~ msgid ""
 #~ "There are two different installation variants to choose here: The hd-"
 #~ "media variant needs an installation ISO file on the stick, to load "
@@ -1569,7 +1546,6 @@ msgstr ""
 #~ "installationsmodulerne og basissystemet. Installationsprogrammet netboot "
 #~ "vil dog indlæse alt det fra et &debian;-spejl."
 
-#, no-c-format
 #~ msgid ""
 #~ "According to your choice, you have to download some installer files from "
 #~ "the hd-media or netboot subdirectory of <ulink url=\"&url-debian-"
@@ -1595,7 +1571,6 @@ msgstr ""
 #~ "eller netboot) eller den grafiske version se i de respektive "
 #~ "<filename>gtk</filename>-undermapper)."
 
-#, no-c-format
 #~ msgid ""
 #~ "Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
 #~ "replaceable> /mnt</userinput>) and copy the downloaded files to the root "
@@ -1605,7 +1580,6 @@ msgstr ""
 #~ "replaceable> /mnt</userinput>) og kopier de hentede filer til rodmappen "
 #~ "på drevet."
 
-#, no-c-format
 #~ msgid ""
 #~ "Next you should create a text file named <filename>syslinux.cfg</"
 #~ "filename> in the root directory of the stick as configuration file for "
@@ -1625,7 +1599,6 @@ msgstr ""
 #~ "<quote><filename>linux</filename></quote> hvis du anvendte filer fra "
 #~ "<filename>netboot</filename>."
 
-#, no-c-format
 #~ msgid ""
 #~ "For the graphical installer (from <filename>gtk</filename>) you should "
 #~ "add <userinput>vga=788</userinput> at the end of the line. Other "
@@ -1635,7 +1608,6 @@ msgstr ""
 #~ "du tilføje <userinput>vga=788</userinput> til den anden linje. Andre "
 #~ "parametre kan tilføjes som ønsket."
 
-#, no-c-format
 #~ msgid ""
 #~ "To enable the boot prompt to permit further parameter appending, add a "
 #~ "<userinput>prompt 1</userinput> line."
@@ -1643,7 +1615,6 @@ msgstr ""
 #~ "For at aktivere opstartsprompten til at acceptere yderligere "
 #~ "parametertilføjelse, tilføjes en linje <userinput>prompt 1</userinput>."
 
-#, no-c-format
 #~ msgid ""
 #~ "If you used files from <filename>hd-media</filename>, you should now copy "
 #~ "the ISO file of a &debian; installation image onto the stick. (For the "
@@ -1653,7 +1624,6 @@ msgstr ""
 #~ "kopiere ISO-filen for et &debian;-installationsaftryk ned på drevet. (For "
 #~ "varianten <filename>netboot</filename> er dette ikke krævet)."
 
-#, no-c-format
 #~ msgid ""
 #~ "You can use either a netinst or a full CD/DVD image (see <xref linkend="
 #~ "\"official-cdrom\"/>). Be sure to select one that fits on your stick. "
@@ -1665,7 +1635,6 @@ msgstr ""
 #~ "Bemærk at <quote>netboot <filename>mini.iso</filename></quote>-aftrykket "
 #~ "ikke er brugbar til dette formål."
 
-#, no-c-format
 #~ msgid ""
 #~ "When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
 #~ "userinput>)."
@@ -1673,13 +1642,11 @@ msgstr ""
 #~ "Når du er færdig, afmonter USB-drevet (<userinput>umount /mnt</"
 #~ "userinput>)."
 
-#, no-c-format
 #~ msgid ""
 #~ "Hard disk installer booting from DOS using <command>loadlin</command>"
 #~ msgstr ""
 #~ "Harddiskinstallationen starter op fra DOS med <command>loadlin</command>"
 
-#, no-c-format
 #~ msgid ""
 #~ "This section explains how to prepare your hard drive for booting the "
 #~ "installer from DOS using <command>loadlin</command>."
@@ -1687,7 +1654,6 @@ msgstr ""
 #~ "Dette afsnit forklarer hvordan du forbereder din harddisk til at starte "
 #~ "installationsprogrammet op fra DOS med <command>loadlin</command>."
 
-#, no-c-format
 #~ msgid ""
 #~ "Copy the following directories from a &debian; installation image to "
 #~ "<filename>c:\\</filename>."
@@ -1695,14 +1661,12 @@ msgstr ""
 #~ "Kopier de følgende mapper fra et &debian;-installationsaftryk til "
 #~ "<filename>c:\\</filename>."
 
-#, no-c-format
 #~ msgid ""
 #~ "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
 #~ msgstr ""
 #~ "<filename>/&x86-install-dir;</filename> (kernens binære fil og "
 #~ "ramdiskaftryk)"
 
-#, no-c-format
 #~ msgid "<filename>/tools</filename> (loadlin tool)"
 #~ msgstr "<filename>/tools</filename> (loadlin-værktøj)"