[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 153 insertions, 156 deletions

diff --git a/po/cs/using-d-i.po b/po/cs/using-d-i.po
index 13613e428..818a2a61e 100644
--- a/po/cs/using-d-i.po
+++ b/po/cs/using-d-i.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_using-d-i\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2019-09-22 23:04+0000\n"
+"POT-Creation-Date: 2019-09-24 23:05+0000\n"
 "PO-Revision-Date: 2018-05-21 10:18+0200\n"
 "Last-Translator: Miroslav Kure <kurem@upcase.inf.upol.cz>\n"
 "Language-Team: \n"
@@ -535,7 +535,7 @@ msgstr "anna"
 #| "the chosen mirror or CD."
 msgid ""
 "Anna's Not Nearly APT. Installs packages which have been retrieved from the "
-"chosen mirror or installation medium."
+"chosen mirror or installation media."
 msgstr ""
 "Anna's Not Nearly APT, tedy v češtině Anna není ani zdaleka jako APT, "
 "instaluje stažené balíky."
@@ -3949,11 +3949,10 @@ msgstr ""
 #, fuzzy, no-c-format
 msgid ""
 "If you do scan multiple installation media, the installer will prompt you to "
-"exchange them when it needs packages from another media than the one "
-"currently in the drive. Note that only discs that belong to the same set "
-"should be scanned. The order in which they are scanned does not really "
-"matter, but scanning them in ascending order will reduce the chance of "
-"mistakes."
+"exchange them when it needs packages from one that isn't currently in the "
+"drive. Note that only discs that belong to the same set should be scanned. "
+"The order in which they are scanned does not really matter, but scanning "
+"them in ascending order will reduce the chance of mistakes."
 msgstr ""
 "Pořadí, ve kterém necháte média prozkoumat, nehraje žádnou roli. Je ovšem "
 "vhodné nechat prozkoumat média pouze ze stejné sady, protože tak předejdete "
@@ -3988,11 +3987,11 @@ msgstr ""
 #| "emphasis> to select the <literal>desktop</literal> task in the next step "
 #| "of the installation."
 msgid ""
-"If you are <emphasis>not</emphasis> installing from a full CD or DVD or a "
-"corresponding image, you really should use a network mirror as otherwise you "
-"will end up with only a very minimal system. However, if you have a limited "
-"Internet connection it is best <emphasis>not</emphasis> to select the "
-"<literal>desktop</literal> task in the next step of the installation."
+"If you are <emphasis>not</emphasis> installing from a full CD/DVD image, you "
+"really should use a network mirror as otherwise you will end up with only a "
+"very minimal system. However, if you have a limited Internet connection it "
+"is best <emphasis>not</emphasis> to select the <literal>desktop</literal> "
+"task in the next step of the installation."
 msgstr ""
 "Pokud <emphasis>neinstalujete</emphasis> z velkého CD nebo DVD, případně z "
 "obrazu velkého CD/DVD, měli byste použití síťového zrcadla povolit, protože "
@@ -4013,14 +4012,13 @@ msgstr ""
 #| "install additional packages after the installation (i.e. after you have "
 #| "rebooted into the new system)."
 msgid ""
-"If you are installing from a single full CD or the corresponding image, "
-"using a network mirror is not required, but is still strongly recommended "
-"because a single CD image contains only a fairly limited number of packages. "
-"If you have a limited Internet connection it may still be best to "
-"<emphasis>not</emphasis> select a network mirror here, but to finish the "
-"installation using only what's available on the CD image and selectively "
-"install additional packages after the installation (i.e. after you have "
-"rebooted into the new system)."
+"If you are installing from a single full CD image, using a network mirror is "
+"not required, but is still strongly recommended because a single CD image "
+"contains only a fairly limited number of packages. If you have a limited "
+"Internet connection it may still be best to <emphasis>not</emphasis> select "
+"a network mirror here, but to finish the installation using only what's "
+"available on the CD image and selectively install additional packages after "
+"the installation (i.e. after you have rebooted into the new system)."
 msgstr ""
 "Instalujete-li z jediného velkého CD nebo obrazu CD (ne DVD), není použití "
 "síťového zrcadla nutné, ale rozhodně je doporučované, protože CD obsahuje "
@@ -4038,10 +4036,9 @@ msgstr ""
 #| "same is true if you have scanned multiple CDs as explained in the "
 #| "previous section. Use of a network mirror is optional."
 msgid ""
-"If you are installing from a DVD or the corresponding image, any packages "
-"needed during the installation should be present on the first DVD (image). "
-"The same is true if you have scanned multiple CD (images) as explained in "
-"the previous section. Use of a network mirror is optional."
+"If you are installing from DVD, any packages needed during the installation "
+"should be present on the first DVD image. Use of a network mirror is "
+"optional."
 msgstr ""
 "Jestliže instalujete z DVD, nebo k instalaci používáte obraz DVD, je potřeba "
 "síťového zrcadla mnohem menší, protože všechny balíky potřebné pro základní "
@@ -4049,7 +4046,7 @@ msgstr ""
 "použijete sadu několika CD."
 
 #. Tag: para
-#: using-d-i.xml:2423
+#: using-d-i.xml:2422
 #, fuzzy, no-c-format
 #| msgid ""
 #| "One advantage of adding a network mirror is that updates that have "
@@ -4070,7 +4067,7 @@ msgstr ""
 "životnost médií bez obav o bezpečnost nebo stabilitu systému."
 
 #. Tag: para
-#: using-d-i.xml:2430
+#: using-d-i.xml:2429
 #, fuzzy, no-c-format
 #| msgid ""
 #| "In summary: selecting a network mirror is generally a good idea, except "
@@ -4091,19 +4088,19 @@ msgstr ""
 "na:"
 
 #. Tag: para
-#: using-d-i.xml:2439
+#: using-d-i.xml:2438
 #, fuzzy, no-c-format
 msgid "the tasks you select in the next step of the installation,"
 msgstr "úlohách vybraných v dalším kroku"
 
 #. Tag: para
-#: using-d-i.xml:2444
+#: using-d-i.xml:2443
 #, no-c-format
 msgid "which packages are needed for those tasks,"
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2449
+#: using-d-i.xml:2448
 #, fuzzy, no-c-format
 msgid ""
 "which of those packages are present on the installation media you have "
@@ -4111,7 +4108,7 @@ msgid ""
 msgstr "balících, které jsou k dispozici na CD/DVD"
 
 #. Tag: para
-#: using-d-i.xml:2454
+#: using-d-i.xml:2453
 #, fuzzy, no-c-format
 msgid ""
 "whether any updated versions of packages included on the installation media "
@@ -4122,7 +4119,7 @@ msgstr ""
 "DVD (opravy závažných chyb, bezpečnostní aktualizace)."
 
 #. Tag: para
-#: using-d-i.xml:2463
+#: using-d-i.xml:2462
 #, no-c-format
 msgid ""
 "Note that the last point means that, even if you choose not to use a network "
@@ -4136,13 +4133,13 @@ msgstr ""
 "předpokladu, že jste použití těchto služeb také nezakázali)."
 
 #. Tag: title
-#: using-d-i.xml:2474
+#: using-d-i.xml:2473
 #, no-c-format
 msgid "Choosing a network mirror"
 msgstr "Výběr síťového zrcadla"
 
 #. Tag: para
-#: using-d-i.xml:2475
+#: using-d-i.xml:2474
 #, fuzzy, no-c-format
 msgid ""
 "Unless you chose not to use a network mirror, you will be presented with a "
@@ -4155,7 +4152,7 @@ msgstr ""
 "počátku instalace."
 
 #. Tag: para
-#: using-d-i.xml:2482
+#: using-d-i.xml:2481
 #, no-c-format
 msgid ""
 "The offered default is deb.debian.org, which is not a mirror itself but will "
@@ -4165,7 +4162,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2489
+#: using-d-i.xml:2488
 #, fuzzy, no-c-format
 msgid ""
 "A mirror can also be specified by hand by choosing <quote>enter information "
@@ -4179,7 +4176,7 @@ msgstr ""
 "hranatými závorkami, např. takto: <quote>[2001:db8::1]</quote>."
 
 #. Tag: para
-#: using-d-i.xml:2497
+#: using-d-i.xml:2496
 #, fuzzy, no-c-format
 msgid ""
 "If your computer is on an IPv6-only network (which is probably not the case "
@@ -4204,13 +4201,13 @@ msgstr ""
 "userinput>. Nebude to asi nejrychlejší, ale bude to fungovat."
 
 #. Tag: title
-#: using-d-i.xml:2520
+#: using-d-i.xml:2519
 #, no-c-format
 msgid "Selecting and Installing Software"
 msgstr "Výběr a instalace softwaru"
 
 #. Tag: para
-#: using-d-i.xml:2522
+#: using-d-i.xml:2521
 #, no-c-format
 msgid ""
 "During the installation process, you are given the opportunity to select "
@@ -4227,7 +4224,7 @@ msgstr ""
 "přizpůsobení počítače pro danou úlohu."
 
 #. Tag: para
-#: using-d-i.xml:2531
+#: using-d-i.xml:2530
 #, fuzzy, no-c-format
 #| msgid ""
 #| "So, you have the ability to choose <emphasis>tasks</emphasis> first, and "
@@ -4274,7 +4271,7 @@ msgstr ""
 "kapitola <xref linkend=\"tasksel-size-list\"/>."
 
 #. Tag: para
-#: using-d-i.xml:2557
+#: using-d-i.xml:2556
 #, no-c-format
 msgid ""
 "Some tasks may be pre-selected based on the characteristics of the computer "
@@ -4287,7 +4284,7 @@ msgstr ""
 "zase odebrat. Dokonce nemusíte instalovat žádnou úlohu."
 
 #. Tag: para
-#: using-d-i.xml:2564
+#: using-d-i.xml:2563
 #, no-c-format
 msgid ""
 "In the standard user interface of the installer, you can use the space bar "
@@ -4297,7 +4294,7 @@ msgstr ""
 "<keycap>mezera</keycap>."
 
 #. Tag: para
-#: using-d-i.xml:2570
+#: using-d-i.xml:2569
 #, no-c-format
 msgid ""
 "The <quote>Desktop environment</quote> task will install a graphical desktop "
@@ -4305,7 +4302,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: using-d-i.xml:2575
+#: using-d-i.xml:2574
 #, no-c-format
 msgid ""
 "By default, &d-i; installs the <phrase arch=\"x86\">Gnome</phrase> <phrase "
@@ -4322,7 +4319,7 @@ msgstr ""
 "podaří."
 
 #. Tag: para
-#: using-d-i.xml:2583
+#: using-d-i.xml:2582
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Note that this will only work if the packages needed for the desired "
@@ -4349,7 +4346,7 @@ msgstr ""
 "problémů."
 
 #. Tag: para
-#: using-d-i.xml:2593
+#: using-d-i.xml:2592
 #, no-c-format
 msgid ""
 "The various server tasks will install software roughly as follows. Web "
@@ -4361,7 +4358,7 @@ msgstr ""
 "classname>; SSH server: <classname>openssh</classname>."
 
 #. Tag: para
-#: using-d-i.xml:2600
+#: using-d-i.xml:2599
 #, no-c-format
 msgid ""
 "The <quote>Standard system</quote> task will install any package that has a "
@@ -4377,7 +4374,7 @@ msgstr ""
 "měli byste tuto úlohu ponechat vybranou."
 
 #. Tag: para
-#: using-d-i.xml:2608
+#: using-d-i.xml:2607
 #, no-c-format
 msgid ""
 "If during language selection a default locale other than the <quote>C</"
@@ -4397,7 +4394,7 @@ msgstr ""
 "balíky (pokud jsou dostupné)."
 
 #. Tag: para
-#: using-d-i.xml:2618
+#: using-d-i.xml:2617
 #, fuzzy, no-c-format
 msgid ""
 "Once you've selected your tasks, select &BTN-CONT;. At this point, "
@@ -4409,7 +4406,7 @@ msgstr ""
 "<command>aptitude</command>, která nainstaluje vybrané balíky."
 
 #. Tag: para
-#: using-d-i.xml:2625
+#: using-d-i.xml:2624
 #, fuzzy, no-c-format
 msgid ""
 "You should be aware that especially the Desktop task is very large. "
@@ -4425,7 +4422,7 @@ msgstr ""
 "stejně jako třeba při vytváření nového uživatele."
 
 #. Tag: para
-#: using-d-i.xml:2634
+#: using-d-i.xml:2633
 #, fuzzy, no-c-format
 msgid ""
 "Even when packages are included on the CD-ROM, the installer may still "
@@ -4447,13 +4444,13 @@ msgstr ""
 "týdnů po stažení obrazu CD."
 
 #. Tag: title
-#: using-d-i.xml:2649
+#: using-d-i.xml:2648
 #, no-c-format
 msgid "Making Your System Bootable"
 msgstr "Nastavení zavádění systému"
 
 #. Tag: para
-#: using-d-i.xml:2651
+#: using-d-i.xml:2650
 #, no-c-format
 msgid ""
 "If you are installing a diskless workstation, obviously, booting off the "
@@ -4467,13 +4464,13 @@ msgstr ""
 "systém ze sítě, viz <xref linkend=\"boot-dev-select-sun\"/>.</phrase>"
 
 #. Tag: title
-#: using-d-i.xml:2666
+#: using-d-i.xml:2665
 #, no-c-format
 msgid "Detecting other operating systems"
 msgstr "Nalezení ostatních operačních systémů"
 
 #. Tag: para
-#: using-d-i.xml:2668
+#: using-d-i.xml:2667
 #, no-c-format
 msgid ""
 "Before a boot loader is installed, the installer will attempt to probe for "
@@ -4488,7 +4485,7 @@ msgstr ""
 "i nalezené operační systémy."
 
 #. Tag: para
-#: using-d-i.xml:2676
+#: using-d-i.xml:2675
 #, no-c-format
 msgid ""
 "Note that multiple operating systems booting on a single machine is still "
@@ -4504,13 +4501,13 @@ msgstr ""
 "prostudovat dokumentaci použitého zavaděče."
 
 #. Tag: title
-#: using-d-i.xml:2694
+#: using-d-i.xml:2693
 #, no-c-format
 msgid "<command>palo</command>-installer"
 msgstr "Instalovat <command>palo</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2695
+#: using-d-i.xml:2694
 #, no-c-format
 msgid ""
 "The bootloader on PA-RISC is <quote>palo</quote>. <command>PALO</command> is "
@@ -4525,19 +4522,19 @@ msgstr ""
 "jádro ze zaváděcí oblasti."
 
 #. Tag: para
-#: using-d-i.xml:2704
+#: using-d-i.xml:2703
 #, no-c-format
 msgid "hppa FIXME ( need more info )"
 msgstr "hppa FIXME ( need more info )"
 
 #. Tag: title
-#: using-d-i.xml:2716 using-d-i.xml:2989
+#: using-d-i.xml:2715 using-d-i.xml:2988
 #, no-c-format
 msgid "Install the <command>Grub</command> Boot Loader on a Hard Disk"
 msgstr "Instalovat zavaděč <command>Grub</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2718 using-d-i.xml:2991
+#: using-d-i.xml:2717 using-d-i.xml:2990
 #, no-c-format
 msgid ""
 "The main &architecture; boot loader is called <quote>grub</quote>. Grub is a "
@@ -4549,7 +4546,7 @@ msgstr ""
 "pro zkušené harcovníky."
 
 #. Tag: para
-#: using-d-i.xml:2724
+#: using-d-i.xml:2723
 #, no-c-format
 msgid ""
 "By default, grub will be installed into the Master Boot Record (MBR), where "
@@ -4561,7 +4558,7 @@ msgstr ""
 "instalovat i někam jinam. Pak si však raději prostudujte manuál ke grubu."
 
 #. Tag: para
-#: using-d-i.xml:2730
+#: using-d-i.xml:2729
 #, no-c-format
 msgid ""
 "If you do not want to install grub, use the &BTN-GOBACK; button to get to "
@@ -4572,13 +4569,13 @@ msgstr ""
 "do hlavního menu. Zde si můžete vybrat, který zavaděč chcete použít."
 
 #. Tag: title
-#: using-d-i.xml:2743
+#: using-d-i.xml:2742
 #, no-c-format
 msgid "Install the <command>LILO</command> Boot Loader on a Hard Disk"
 msgstr "Instalovat zavaděč <command>LILO</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2745
+#: using-d-i.xml:2744
 #, no-c-format
 msgid ""
 "The second &architecture; boot loader is called <quote>LILO</quote>. It is "
@@ -4594,7 +4591,7 @@ msgstr ""
 "<ulink url=\"&url-lilo-howto;\">LILO mini-HOWTO</ulink>."
 
 #. Tag: para
-#: using-d-i.xml:2755
+#: using-d-i.xml:2754
 #, no-c-format
 msgid ""
 "Currently the LILO installation will only create menu entries for other "
@@ -4608,7 +4605,7 @@ msgstr ""
 "budete muset přidat příslušné záznamy po instalaci ručně."
 
 #. Tag: para
-#: using-d-i.xml:2763
+#: using-d-i.xml:2762
 #, no-c-format
 msgid ""
 "&d-i; offers you three choices on where to install the <command>LILO</"
@@ -4618,13 +4615,13 @@ msgstr ""
 "kam se má zavaděč naintalovat:"
 
 #. Tag: term
-#: using-d-i.xml:2770
+#: using-d-i.xml:2769
 #, no-c-format
 msgid "Master Boot Record (MBR)"
 msgstr "Hlavní zaváděcí záznam"
 
 #. Tag: para
-#: using-d-i.xml:2770
+#: using-d-i.xml:2769
 #, no-c-format
 msgid ""
 "This way the <command>LILO</command> will take complete control of the boot "
@@ -4634,13 +4631,13 @@ msgstr ""
 "starat i o zavádění ostatních operačních systémů."
 
 #. Tag: term
-#: using-d-i.xml:2777
+#: using-d-i.xml:2776
 #, no-c-format
 msgid "new &debian; partition"
 msgstr "Nová oblast &debian;u"
 
 #. Tag: para
-#: using-d-i.xml:2777
+#: using-d-i.xml:2776
 #, no-c-format
 msgid ""
 "Choose this if you want to use another boot manager. <command>LILO</command> "
@@ -4652,13 +4649,13 @@ msgstr ""
 "druhotný zavaděč."
 
 #. Tag: term
-#: using-d-i.xml:2786
+#: using-d-i.xml:2785
 #, no-c-format
 msgid "Other choice"
 msgstr "Jiná volba (Pokročilé)"
 
 #. Tag: para
-#: using-d-i.xml:2786
+#: using-d-i.xml:2785
 #, no-c-format
 msgid ""
 "Useful for advanced users who want to install <command>LILO</command> "
@@ -4671,7 +4668,7 @@ msgstr ""
 "<filename>/dev/sda</filename>."
 
 #. Tag: para
-#: using-d-i.xml:2796
+#: using-d-i.xml:2795
 #, no-c-format
 msgid ""
 "If you can no longer boot into Windows 9x (or DOS) after this step, you'll "
@@ -4687,13 +4684,13 @@ msgstr ""
 "se dostat zpět do &debian;u!"
 
 #. Tag: title
-#: using-d-i.xml:2812
+#: using-d-i.xml:2811
 #, no-c-format
 msgid "Install the <command>ELILO</command> Boot Loader on a Hard Disk"
 msgstr "Instalovat zavaděč <command>ELILO</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2814
+#: using-d-i.xml:2813
 #, no-c-format
 msgid ""
 "The &architecture; boot loader is called <quote>elilo</quote>. It is modeled "
@@ -4719,7 +4716,7 @@ msgstr ""
 "oblasti) provádí samotné zavádění linuxového jádra."
 
 #. Tag: para
-#: using-d-i.xml:2830
+#: using-d-i.xml:2829
 #, no-c-format
 msgid ""
 "The <quote>elilo</quote> configuration and installation is done as the last "
@@ -4736,13 +4733,13 @@ msgstr ""
 "leží <emphasis>kořenová</emphasis> oblast."
 
 #. Tag: title
-#: using-d-i.xml:2842
+#: using-d-i.xml:2841
 #, no-c-format
 msgid "Choose the correct partition!"
 msgstr "Výběr správné oblasti"
 
 #. Tag: para
-#: using-d-i.xml:2844
+#: using-d-i.xml:2843
 #, no-c-format
 msgid ""
 "The criterion for selecting a partition is that it must be a FAT format "
@@ -4759,13 +4756,13 @@ msgstr ""
 "zformátovat a smazat tak z ní všechna data!"
 
 #. Tag: title
-#: using-d-i.xml:2859
+#: using-d-i.xml:2858
 #, no-c-format
 msgid "EFI Partition Contents"
 msgstr "Obsah EFI oblasti"
 
 #. Tag: para
-#: using-d-i.xml:2861
+#: using-d-i.xml:2860
 #, no-c-format
 msgid ""
 "The EFI partition is a FAT filesystem format partition on one of the hard "
@@ -4789,13 +4786,13 @@ msgstr ""
 "filename>."
 
 #. Tag: filename
-#: using-d-i.xml:2883
+#: using-d-i.xml:2882
 #, no-c-format
 msgid "elilo.conf"
 msgstr "elilo.conf"
 
 #. Tag: para
-#: using-d-i.xml:2884
+#: using-d-i.xml:2883
 #, no-c-format
 msgid ""
 "This is the configuration file read by the boot loader when it starts. It is "
@@ -4807,13 +4804,13 @@ msgstr ""
 "cesty k souborům tak, aby ukazovaly na EFI oblast."
 
 #. Tag: filename
-#: using-d-i.xml:2893
+#: using-d-i.xml:2892
 #, no-c-format
 msgid "elilo.efi"
 msgstr "elilo.efi"
 
 #. Tag: para
-#: using-d-i.xml:2894
+#: using-d-i.xml:2893
 #, no-c-format
 msgid ""
 "This is the boot loader program that the <quote>EFI Boot Manager</quote> "
@@ -4826,13 +4823,13 @@ msgstr ""
 "EFI zavaděče.)"
 
 #. Tag: filename
-#: using-d-i.xml:2904
+#: using-d-i.xml:2903
 #, no-c-format
 msgid "initrd.img"
 msgstr "initrd.img"
 
 #. Tag: para
-#: using-d-i.xml:2905
+#: using-d-i.xml:2904
 #, no-c-format
 msgid ""
 "This is the initial root filesystem used to boot the kernel. It is a copy of "
@@ -4847,13 +4844,13 @@ msgstr ""
 "img</filename>."
 
 #. Tag: filename
-#: using-d-i.xml:2917
+#: using-d-i.xml:2916
 #, no-c-format
 msgid "readme.txt"
 msgstr "readme.txt"
 
 #. Tag: para
-#: using-d-i.xml:2918
+#: using-d-i.xml:2917
 #, no-c-format
 msgid ""
 "This is a small text file warning you that the contents of the directory are "
@@ -4865,13 +4862,13 @@ msgstr ""
 "<filename>/usr/sbin/elilo</filename> ztraceny."
 
 #. Tag: filename
-#: using-d-i.xml:2928
+#: using-d-i.xml:2927
 #, no-c-format
 msgid "vmlinuz"
 msgstr "vmlinuz"
 
 #. Tag: para
-#: using-d-i.xml:2929
+#: using-d-i.xml:2928
 #, no-c-format
 msgid ""
 "This is the compressed kernel itself. It is a copy of the file referenced in "
@@ -4885,13 +4882,13 @@ msgstr ""
 "ukazoval symbolický odkaz <filename>/vmlinuz</filename>."
 
 #. Tag: title
-#: using-d-i.xml:2953
+#: using-d-i.xml:2952
 #, no-c-format
 msgid "Install <command>Yaboot</command> on a Hard Disk"
 msgstr "Instalovat <command>Yaboot</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2954
+#: using-d-i.xml:2953
 #, no-c-format
 msgid ""
 "Newer (mid 1998 and on) PowerMacs use <command>yaboot</command> as their "
@@ -4910,13 +4907,13 @@ msgstr ""
 "bootovatelný a OpenFirmware bude nastaven na zavádění &debian;u."
 
 #. Tag: title
-#: using-d-i.xml:2972
+#: using-d-i.xml:2971
 #, no-c-format
 msgid "Install <command>Quik</command> on a Hard Disk"
 msgstr "Instalovat <command>Quik</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:2973
+#: using-d-i.xml:2972
 #, no-c-format
 msgid ""
 "The boot loader for OldWorld Power Macintosh machines is <command>quik</"
@@ -4930,7 +4927,7 @@ msgstr ""
 "Powermacích 7200, 7300, 7600 a některých klonech."
 
 #. Tag: para
-#: using-d-i.xml:2997
+#: using-d-i.xml:2996
 #, no-c-format
 msgid ""
 "By default, Grub will be installed into the PReP partition, where it will "
@@ -4942,13 +4939,13 @@ msgstr ""
 "převezme kompletní kontrolu nad zaváděním."
 
 #. Tag: title
-#: using-d-i.xml:3010
+#: using-d-i.xml:3009
 #, no-c-format
 msgid "<command>zipl</command>-installer"
 msgstr "Instalovat zavaděč <command>zipl</command>"
 
 #. Tag: para
-#: using-d-i.xml:3011
+#: using-d-i.xml:3010
 #, no-c-format
 msgid ""
 "The boot loader on &arch-title; is <quote>zipl</quote>. <command>ZIPL</"
@@ -4964,13 +4961,13 @@ msgstr ""
 "quote> na stránkách developerWorks firmy IBM."
 
 #. Tag: title
-#: using-d-i.xml:3028
+#: using-d-i.xml:3027
 #, no-c-format
 msgid "Install the <command>SILO</command> Boot Loader on a Hard Disk"
 msgstr "Instalovat zavaděč <command>SILO</command> na pevný disk"
 
 #. Tag: para
-#: using-d-i.xml:3030
+#: using-d-i.xml:3029
 #, no-c-format
 msgid ""
 "The standard &architecture; boot loader is called <quote>silo</quote>. It is "
@@ -5001,13 +4998,13 @@ msgstr ""
 "chcete instalovat GNU/Linux na počítač sdílený se systémy SunOS/Solaris."
 
 #. Tag: title
-#: using-d-i.xml:3055
+#: using-d-i.xml:3054
 #, no-c-format
 msgid "Making the system bootable with flash-kernel"
 msgstr "Nastavit systém jako zaveditelný pomocí flash-kernel"
 
 #. Tag: para
-#: using-d-i.xml:3056
+#: using-d-i.xml:3055
 #, no-c-format
 msgid ""
 "As there is no common firmware interface on all ARM platforms, the steps "
@@ -5026,7 +5023,7 @@ msgstr ""
 "dané zařízení podporováno, automaticky na něm příslušné kroky provede."
 
 #. Tag: para
-#: using-d-i.xml:3067
+#: using-d-i.xml:3066
 #, no-c-format
 msgid ""
 "On devices which boot from internal NOR- or NAND-flash memory, flash-kernel "
@@ -5043,7 +5040,7 @@ msgstr ""
 "flash-kernel obvykle přepíše předchozí obsah flash paměti!"
 
 #. Tag: para
-#: using-d-i.xml:3077
+#: using-d-i.xml:3076
 #, no-c-format
 msgid ""
 "For ARM systems that use U-Boot as their system firmware and boot the kernel "
@@ -5058,13 +5055,13 @@ msgstr ""
 "uživatele."
 
 #. Tag: title
-#: using-d-i.xml:3093
+#: using-d-i.xml:3092
 #, no-c-format
 msgid "Continue Without Boot Loader"
 msgstr "Pokračovat bez zavaděče"
 
 #. Tag: para
-#: using-d-i.xml:3095
+#: using-d-i.xml:3094
 #, no-c-format
 msgid ""
 "This option can be used to complete the installation even when no boot "
@@ -5077,7 +5074,7 @@ msgstr ""
 "použít stávající zavaděč)."
 
 #. Tag: para
-#: using-d-i.xml:3102
+#: using-d-i.xml:3101
 #, no-c-format
 msgid ""
 "If you plan to manually configure your bootloader, you should check the name "
@@ -5097,13 +5094,13 @@ msgstr ""
 "<filename>/boot</filename> na samostatné oblasti)."
 
 #. Tag: title
-#: using-d-i.xml:3119
+#: using-d-i.xml:3118
 #, no-c-format
 msgid "Finishing the Installation"
 msgstr "Dokončení instalace"
 
 #. Tag: para
-#: using-d-i.xml:3120
+#: using-d-i.xml:3119
 #, no-c-format
 msgid ""
 "This is the last step in the &debian; installation process during which the "
@@ -5114,13 +5111,13 @@ msgstr ""
 "systému. Většina práce spočívá v uklizení po &d-i;u."
 
 #. Tag: title
-#: using-d-i.xml:3133
+#: using-d-i.xml:3132
 #, no-c-format
 msgid "Setting the System Clock"
 msgstr "Nastavení systémových hodin"
 
 #. Tag: para
-#: using-d-i.xml:3135
+#: using-d-i.xml:3134
 #, no-c-format
 msgid ""
 "The installer may ask you if the computer's clock is set to UTC. Normally "
@@ -5133,7 +5130,7 @@ msgstr ""
 "podle nalezených operačních systémů."
 
 #. Tag: para
-#: using-d-i.xml:3142
+#: using-d-i.xml:3141
 #, no-c-format
 msgid ""
 "In expert mode you will always be able to choose whether or not the clock is "
@@ -5151,7 +5148,7 @@ msgstr ""
 "touto možností pracovat neumí.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3153
+#: using-d-i.xml:3152
 #, no-c-format
 msgid ""
 "At this point &d-i; will also attempt to save the current time to the "
@@ -5163,13 +5160,13 @@ msgstr ""
 "v místním čase."
 
 #. Tag: title
-#: using-d-i.xml:3168
+#: using-d-i.xml:3167
 #, no-c-format
 msgid "Reboot the System"
 msgstr "Dokončení instalace a restart do nového systému"
 
 #. Tag: para
-#: using-d-i.xml:3170
+#: using-d-i.xml:3169
 #, fuzzy, no-c-format
 #| msgid ""
 #| "You will be prompted to remove the boot media (CD, floppy, etc) that you "
@@ -5186,7 +5183,7 @@ msgstr ""
 "systému."
 
 #. Tag: para
-#: using-d-i.xml:3176
+#: using-d-i.xml:3175
 #, no-c-format
 msgid ""
 "After a final prompt the system will be halted because rebooting is not "
@@ -5199,13 +5196,13 @@ msgstr ""
 "na začátku instalace vybrali pro kořenový systém."
 
 #. Tag: title
-#: using-d-i.xml:3189
+#: using-d-i.xml:3188
 #, no-c-format
 msgid "Troubleshooting"
 msgstr "Řešení problémů"
 
 #. Tag: para
-#: using-d-i.xml:3190
+#: using-d-i.xml:3189
 #, no-c-format
 msgid ""
 "The components listed in this section are usually not involved in the "
@@ -5216,13 +5213,13 @@ msgstr ""
 "tiše čekají v pozadí, aby vám pomohly v případě, že se něco pokazí."
 
 #. Tag: title
-#: using-d-i.xml:3203
+#: using-d-i.xml:3202
 #, no-c-format
 msgid "Saving the installation logs"
 msgstr "Uložení záznamů o instalaci"
 
 #. Tag: para
-#: using-d-i.xml:3205
+#: using-d-i.xml:3204
 #, no-c-format
 msgid ""
 "If the installation is successful, the logfiles created during the "
@@ -5233,7 +5230,7 @@ msgstr ""
 "uloženy v novém systému v adresáři <filename>/var/log/installer/</filename>."
 
 #. Tag: para
-#: using-d-i.xml:3212
+#: using-d-i.xml:3211
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Choosing <guimenuitem>Save debug logs</guimenuitem> from the main menu "
@@ -5255,13 +5252,13 @@ msgstr ""
 "guimenuitem>."
 
 #. Tag: title
-#: using-d-i.xml:3232
+#: using-d-i.xml:3231
 #, no-c-format
 msgid "Using the Shell and Viewing the Logs"
 msgstr "Používání shellu a prohlížení logů"
 
 #. Tag: para
-#: using-d-i.xml:3234
+#: using-d-i.xml:3233
 #, no-c-format
 msgid ""
 "There are several methods you can use to get a shell while running an "
@@ -5285,7 +5282,7 @@ msgstr ""
 "keycap> <keycap>F1</keycap> </keycombo>."
 
 #. Tag: para
-#: using-d-i.xml:3252
+#: using-d-i.xml:3251
 #, no-c-format
 msgid "For the graphical installer see also <xref linkend=\"gtk-using\"/>."
 msgstr ""
@@ -5293,7 +5290,7 @@ msgstr ""
 "\"gtk-using\"/>."
 
 #. Tag: para
-#: using-d-i.xml:3256
+#: using-d-i.xml:3255
 #, no-c-format
 msgid ""
 "If you cannot switch consoles, there is also an <guimenuitem>Execute a "
@@ -5308,7 +5305,7 @@ msgstr ""
 "<userinput>exit</userinput>."
 
 #. Tag: para
-#: using-d-i.xml:3264
+#: using-d-i.xml:3263
 #, no-c-format
 msgid ""
 "At this point you are booted from the RAM disk, and there is a limited set "
@@ -5325,7 +5322,7 @@ msgstr ""
 "jako je historie a automatické doplňování příkazů."
 
 #. Tag: para
-#: using-d-i.xml:3273
+#: using-d-i.xml:3272
 #, fuzzy, no-c-format
 msgid ""
 "To edit and view files, use the text editor <command>nano</command>. Log "
@@ -5335,7 +5332,7 @@ msgstr ""
 "Pro úpravu souborů máte k dispozici textový editor <command>nano</command>."
 
 #. Tag: para
-#: using-d-i.xml:3280
+#: using-d-i.xml:3279
 #, fuzzy, no-c-format
 msgid ""
 "Although you can do basically anything in a shell that the available "
@@ -5347,7 +5344,7 @@ msgstr ""
 "a jeho příkazy jsou zde jen pro případ, že se něco pokazí."
 
 #. Tag: para
-#: using-d-i.xml:3286
+#: using-d-i.xml:3285
 #, fuzzy, no-c-format
 msgid ""
 "Doing things manually from the shell may interfere with the installation "
@@ -5361,13 +5358,13 @@ msgstr ""
 "krok již provedli."
 
 #. Tag: title
-#: using-d-i.xml:3302
+#: using-d-i.xml:3301
 #, no-c-format
 msgid "Installation Over the Network"
 msgstr "Instalace přes síť"
 
 #. Tag: para
-#: using-d-i.xml:3304
+#: using-d-i.xml:3303
 #, no-c-format
 msgid ""
 "One of the more interesting components is <firstterm>network-console</"
@@ -5385,7 +5382,7 @@ msgstr ""
 "install\"/>.)"
 
 #. Tag: para
-#: using-d-i.xml:3314
+#: using-d-i.xml:3313
 #, fuzzy, no-c-format
 #| msgid ""
 #| "This component is not loaded into the main installation menu by default, "
@@ -5417,7 +5414,7 @@ msgstr ""
 "guimenuitem>."
 
 #. Tag: para
-#: using-d-i.xml:3327
+#: using-d-i.xml:3326
 #, no-c-format
 msgid ""
 "For installations on &arch-title;, this is the default method after setting "
@@ -5427,7 +5424,7 @@ msgstr ""
 "po nastavení sítě."
 
 #. Tag: para
-#: using-d-i.xml:3332
+#: using-d-i.xml:3331
 #, no-c-format
 msgid ""
 "<phrase arch=\"not-s390\">After selecting this new entry, you</phrase> "
@@ -5450,7 +5447,7 @@ msgstr ""
 "vzdáleně."
 
 #. Tag: para
-#: using-d-i.xml:3344
+#: using-d-i.xml:3343
 #, no-c-format
 msgid ""
 "Should you decide to continue with the installation locally, you can always "
@@ -5462,7 +5459,7 @@ msgstr ""
 "můžete vybrat další krok."
 
 #. Tag: para
-#: using-d-i.xml:3350
+#: using-d-i.xml:3349
 #, no-c-format
 msgid ""
 "Now let's switch to the other side of the wire. As a prerequisite, you need "
@@ -5493,7 +5490,7 @@ msgstr ""
 "potvrdit, zda je správný."
 
 #. Tag: para
-#: using-d-i.xml:3367
+#: using-d-i.xml:3366
 #, no-c-format
 msgid ""
 "The <command>ssh</command> server in the installer uses a default "
@@ -5516,7 +5513,7 @@ msgstr ""
 "kterém se spojení přerušilo."
 
 #. Tag: para
-#: using-d-i.xml:3380
+#: using-d-i.xml:3379
 #, no-c-format
 msgid ""
 "You may be able to avoid the connection being dropped by adding the option "
@@ -5538,7 +5535,7 @@ msgstr ""
 "<command>ssh</command> ustálo)."
 
 #. Tag: para
-#: using-d-i.xml:3393
+#: using-d-i.xml:3392
 #, no-c-format
 msgid ""
 "If you install several computers in turn and they happen to have the same IP "
@@ -5562,7 +5559,7 @@ msgstr ""
 "command>. </para></footnote> a připojení zopakovat."
 
 #. Tag: para
-#: using-d-i.xml:3409
+#: using-d-i.xml:3408
 #, no-c-format
 msgid ""
 "After the login you will be presented with an initial screen where you have "
@@ -5583,7 +5580,7 @@ msgstr ""
 "kterých si můžete spustit dle libosti)."
 
 #. Tag: para
-#: using-d-i.xml:3419
+#: using-d-i.xml:3418
 #, no-c-format
 msgid ""
 "After you have started the installation remotely over SSH, you should not go "
@@ -5598,13 +5595,13 @@ msgstr ""
 "problémům v novém systému."
 
 #. Tag: title
-#: using-d-i.xml:3438
+#: using-d-i.xml:3437
 #, no-c-format
 msgid "Loading Missing Firmware"
 msgstr "Nahrání chybějícího firmwaru"
 
 #. Tag: para
-#: using-d-i.xml:3439
+#: using-d-i.xml:3438
 #, no-c-format
 msgid ""
 "As described in <xref linkend=\"hardware-firmware\"/>, some devices require "
@@ -5619,7 +5616,7 @@ msgstr ""
 "firmware je potřeba až pro povolení speciálních vlastností."
 
 #. Tag: para
-#: using-d-i.xml:3447
+#: using-d-i.xml:3446
 #, no-c-format
 msgid ""
 "If a device driver requests firmware that is not available, &d-i; will "
@@ -5636,7 +5633,7 @@ msgstr ""
 "<filename>/lib/firmware</filename> a příslušný modul je znovu zaveden."
 
 #. Tag: para
-#: using-d-i.xml:3457
+#: using-d-i.xml:3456
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Which devices are scanned and which file systems are supported depends on "
@@ -5661,7 +5658,7 @@ msgstr ""
 "karty.</phrase>"
 
 #. Tag: para
-#: using-d-i.xml:3467
+#: using-d-i.xml:3466
 #, no-c-format
 msgid ""
 "Note that it is possible to skip loading the firmware if you know the device "
@@ -5672,7 +5669,7 @@ msgstr ""
 "funguje i bez firmwaru, můžete zavedení firmwaru přeskočit."
 
 #. Tag: para
-#: using-d-i.xml:3473
+#: using-d-i.xml:3472
 #, no-c-format
 msgid ""
 "&d-i; only prompts for firmware needed by kernel modules loaded during the "
@@ -5693,13 +5690,13 @@ msgstr ""
 "řádky obsahující slovo <quote>firmware</quote>."
 
 #. Tag: title
-#: using-d-i.xml:3487
+#: using-d-i.xml:3486
 #, no-c-format
 msgid "Preparing a medium"
 msgstr "Příprava média"
 
 #. Tag: para
-#: using-d-i.xml:3488
+#: using-d-i.xml:3487
 #, fuzzy, no-c-format
 #| msgid ""
 #| "Official CD images do not include non-free firmware. The most common "
@@ -5734,7 +5731,7 @@ msgstr ""
 "instalace."
 
 #. Tag: para
-#: using-d-i.xml:3501
+#: using-d-i.xml:3500
 #, no-c-format
 msgid ""
 "Tarballs and zip files containing current packages for the most common "
@@ -5749,7 +5746,7 @@ msgstr ""
 "příslušné vydání a rozbalit jej na médium."
 
 #. Tag: para
-#: using-d-i.xml:3515
+#: using-d-i.xml:3514
 #, no-c-format
 msgid ""
 "If the firmware you need is not included in the tarball, you can also "
@@ -5763,7 +5760,7 @@ msgstr ""
 "dostupných balíků s firmwarem (nemusí být úplný):"
 
 #. Tag: para
-#: using-d-i.xml:3529
+#: using-d-i.xml:3528
 #, no-c-format
 msgid ""
 "It is also possible to copy individual firmware files to the medium. Loose "
@@ -5775,13 +5772,13 @@ msgstr ""
 "nebo od dodavatele hardwaru."
 
 #. Tag: title
-#: using-d-i.xml:3538
+#: using-d-i.xml:3537
 #, no-c-format
 msgid "Firmware and the Installed System"
 msgstr "Firmware a instalovaný systém"
 
 #. Tag: para
-#: using-d-i.xml:3539
+#: using-d-i.xml:3538
 #, no-c-format
 msgid ""
 "Any firmware loaded during the installation will be copied automatically to "
@@ -5799,7 +5796,7 @@ msgstr ""
 "firmware nepodaří zavést kvůli rozdílné verzi."
 
 #. Tag: para
-#: using-d-i.xml:3548
+#: using-d-i.xml:3547
 #, no-c-format
 msgid ""
 "If the firmware was loaded from a firmware package, &d-i; will also install "
@@ -5814,7 +5811,7 @@ msgstr ""
 "se firmware bude aktualizovat automaticky."
 
 #. Tag: para
-#: using-d-i.xml:3556
+#: using-d-i.xml:3555
 #, no-c-format
 msgid ""
 "If loading the firmware was skipped during the installation, the relevant "
@@ -5826,7 +5823,7 @@ msgstr ""
 "budete muset doinstalovat firmware ručně."
 
 #. Tag: para
-#: using-d-i.xml:3563
+#: using-d-i.xml:3562
 #, no-c-format
 msgid ""
 "If the firmware was loaded from loose firmware files, the firmware copied to "