[SILENT_COMMIT] Update of POT and PO files for the installation-guide

1 files changed, 422 insertions, 222 deletions

diff --git a/po/ca/install-methods.po b/po/ca/install-methods.po
index ce17c7ddf..80ff505a2 100644
--- a/po/ca/install-methods.po
+++ b/po/ca/install-methods.po
@@ -10,7 +10,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: d-i-manual_install-methods\n"
 "Report-Msgid-Bugs-To: debian-boot@lists.debian.org\n"
-"POT-Creation-Date: 2020-12-02 23:02+0000\n"
+"POT-Creation-Date: 2021-10-27 23:02+0000\n"
 "PO-Revision-Date: 2021-02-16 19:54+0000\n"
 "Last-Translator: d <dmanye@gmail.com>\n"
 "Language-Team: \n"
@@ -344,7 +344,18 @@ msgstr "Preparació dels fitxers per arrencar amb el llapis de memòria USB"
 
 #. Tag: para
 #: install-methods.xml:240
-#, no-c-format
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
+#| "already running and where USB is supported. With current GNU/Linux "
+#| "systems the USB stick should be automatically recognized when you insert "
+#| "it. If it is not you should check that the usb-storage kernel module is "
+#| "loaded. When the USB stick is inserted, it will be mapped to a device "
+#| "named <filename>/dev/sdX</filename>, where the <quote>X</quote> is a "
+#| "letter in the range a-z. You should be able to see to which device the "
+#| "USB stick was mapped by running the command <command>dmesg</command> "
+#| "after inserting it. To write to your stick, you may have to turn off its "
+#| "write protection switch."
 msgid ""
 "To prepare the USB stick, we recommend to use a system where GNU/Linux is "
 "already running and where USB is supported. With current GNU/Linux systems "
@@ -353,8 +364,10 @@ msgid ""
 "the USB stick is inserted, it will be mapped to a device named <filename>/"
 "dev/sdX</filename>, where the <quote>X</quote> is a letter in the range a-z. "
 "You should be able to see to which device the USB stick was mapped by "
-"running the command <command>dmesg</command> after inserting it. To write to "
-"your stick, you may have to turn off its write protection switch."
+"running the command <command>lsblk</command> before and after inserting it. "
+"(The output of <command>dmesg</command> (as root) is another possible method "
+"for that.) To write to your stick, you may have to turn off its write "
+"protection switch."
 msgstr ""
 "Per preparar el llapis USB, us recomanem usar un sistema amb GNU/Linux que "
 "suporti dispositius USB. Els sistemes GNU/Linux actuals normalment "
@@ -368,13 +381,18 @@ msgstr ""
 "protecció d'escriptura del llapis USB."
 
 #. Tag: para
-#: install-methods.xml:253
-#, no-c-format
+#: install-methods.xml:255
+#, fuzzy, no-c-format
+#| msgid ""
+#| "The procedures described in this section will destroy anything already on "
+#| "the device! Make very sure that you use the correct device name for your "
+#| "USB stick. If you use the wrong device the result could be that all "
+#| "information on for example a hard disk could be lost."
 msgid ""
 "The procedures described in this section will destroy anything already on "
 "the device! Make very sure that you use the correct device name for your USB "
 "stick. If you use the wrong device the result could be that all information "
-"on for example a hard disk could be lost."
+"on, for example, a hard disk is lost."
 msgstr ""
 "Aneu amb compte, tots els procediments que es descriuen en aquesta secció "
 "destruiran tot el que hi hagi al dispositiu. Assegureu-vos que esteu "
@@ -383,19 +401,27 @@ msgstr ""
 "exemple, el disc dur principal."
 
 #. Tag: title
-#: install-methods.xml:263
+#: install-methods.xml:265
 #, no-c-format
 msgid "Preparing a USB stick using a hybrid CD/DVD image"
 msgstr "Preparar una memòria USB fent servir una imatge híbrida de CD/DVD"
 
 #. Tag: para
-#: install-methods.xml:264
-#, no-c-format
+#: install-methods.xml:266
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Debian installation images can now be written directly to a USB stick, "
+#| "which is a very easy way to make a bootable USB stick. Simply choose an "
+#| "image (such as the netinst, CD, DVD-1, or netboot) that will fit on your "
+#| "USB stick. See <xref linkend=\"official-cdrom\"/> to get an installation "
+#| "image."
 msgid ""
-"Debian installation images can now be written directly to a USB stick, which "
-"is a very easy way to make a bootable USB stick. Simply choose an image "
-"(such as the netinst, CD, DVD-1, or netboot) that will fit on your USB "
-"stick. See <xref linkend=\"official-cdrom\"/> to get an installation image."
+"Debian installation images for this architecture are created using the "
+"<command>isohybrid</command> technology; that means they can be written "
+"directly to a USB stick, which is a very easy way to make an installation "
+"media. Simply choose an image (such as the netinst, CD or DVD-1) that will "
+"fit on your USB stick. See <xref linkend=\"official-cdrom\"/> to get an "
+"installation image."
 msgstr ""
 "Les imatges d'instal·lació de Debian ara es poden escriure directament a una "
 "memòria USB, que resulta ésser un sistema molt senzill d'obtenir una memòria "
@@ -405,7 +431,7 @@ msgstr ""
 "per a obtenir una imatge d'instal·lació."
 
 #. Tag: para
-#: install-methods.xml:272
+#: install-methods.xml:276
 #, no-c-format
 msgid ""
 "Alternatively, for very small USB sticks, only a few megabytes in size, you "
@@ -419,7 +445,7 @@ msgstr ""
 "\"/>)."
 
 #. Tag: para
-#: install-methods.xml:279
+#: install-methods.xml:283
 #, no-c-format
 msgid ""
 "The installation image you choose should be written directly to the USB "
@@ -447,7 +473,7 @@ msgstr ""
 "\">Debian CD FAQ</ulink>."
 
 #. Tag: para
-#: install-methods.xml:291
+#: install-methods.xml:295
 #, no-c-format
 msgid ""
 "The image must be written to the whole-disk device and not a partition, e."
@@ -459,7 +485,7 @@ msgstr ""
 "<command>unetbootin</command> que modifiquen la imatge."
 
 #. Tag: para
-#: install-methods.xml:297
+#: install-methods.xml:301
 #, no-c-format
 msgid ""
 "Simply writing the installation image to USB like this should work fine for "
@@ -472,7 +498,7 @@ msgstr ""
 "exigències especials."
 
 #. Tag: para
-#: install-methods.xml:305
+#: install-methods.xml:309
 #, no-c-format
 msgid ""
 "The hybrid image on the stick does not occupy all the storage space, so it "
@@ -487,39 +513,37 @@ msgstr ""
 "fer servir la memòria per altres coses."
 
 #. Tag: para
-#: install-methods.xml:313
+#: install-methods.xml:317
 #, no-c-format
 msgid ""
-"Create a second, FAT partition on the stick, mount the partition and copy or "
-"unpack the firmware onto it. For example:"
-msgstr ""
-"Generau una segona partició FAT en la memòria USB, monteu la partició i "
-"copiau o descomprimiu el microprogramari en ella. Per exemple:"
-
-#. Tag: screen
-#: install-methods.xml:318
-#, no-c-format
-msgid ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+"To do so, use cfdisk or any other partitioning tool to create an additional "
+"partition on the stick. Then create a (FAT) filesystem on the partition, "
+"mount it and copy or unpack the firmware onto it, for example with: "
+"<informalexample><screen>\n"
+"# mkdosfs -n FIRMWARE /dev/sdX3\n"
+"# mount /dev/<replaceable>sdX3</replaceable> /mnt\n"
 "# cd /mnt\n"
 "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
 "# cd /\n"
-"# umount /mnt"
+"# umount /mnt\n"
+"</screen></informalexample> Take care that you use the correct device name "
+"for your USB stick. The <command>mkdosfs</command> command is contained in "
+"the <classname>dosfstools</classname> &debian; package."
 msgstr ""
-"# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
-"# cd /mnt\n"
-"# tar zxvf <replaceable>adreça a</replaceable>firmware.tar.gz\n"
-"# cd /\n"
-"# umount /mnt"
 
 #. Tag: para
-#: install-methods.xml:320
-#, no-c-format
+#: install-methods.xml:329
+#, fuzzy, no-c-format
+#| msgid ""
+#| "You might have written the <filename>mini.iso</filename> to the USB "
+#| "stick. In this case the second partition doesn't have to be created as, "
+#| "very nicely, it will already be present. Unplugging and replugging the "
+#| "USB stick should make the two partitions visible."
 msgid ""
-"You might have written the <filename>mini.iso</filename> to the USB stick. "
-"In this case the second partition doesn't have to be created as, very "
-"nicely, it will already be present. Unplugging and replugging the USB stick "
-"should make the two partitions visible."
+"If you have chosen the <filename>mini.iso</filename> to be written to the "
+"USB stick, the second partition doesn't have to be created, as - very nicely "
+"- it will already be present. Unplugging and replugging the USB stick should "
+"make the two partitions visible."
 msgstr ""
 "És possible que el <filename>mini.iso</filename> estigui escrit en la "
 "memòria USB. En aquest cas, la segona partició no s'ha de generar atès que "
@@ -527,19 +551,36 @@ msgstr ""
 "podrà fer visibles les dues particions."
 
 #. Tag: title
-#: install-methods.xml:334
+#: install-methods.xml:343
 #, no-c-format
 msgid "Manually copying files to the USB stick"
 msgstr "Copiar manualment els fitxers en la memòria USB"
 
 #. Tag: para
-#: install-methods.xml:335
+#: install-methods.xml:344
 #, no-c-format
 msgid ""
-"An alternative way to set up your USB stick is to manually copy the "
-"installer files, and also an installation image to it. Note that the USB "
-"stick should be at least 1 GB in size (smaller setups are possible if you "
-"follow <xref linkend=\"usb-copy-flexible\"/>)."
+"Prior to isohybrid technology being used for &debian; installation images, "
+"the methods documented in the chapters below were used to prepare media for "
+"booting from USB devices. These have been superseded by the technique in "
+"<xref linkend=\"usb-copy-isohybrid\"/>, but have been left here for "
+"educational and historical purposes and in case they are useful to some user."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:353
+#, fuzzy, no-c-format
+#| msgid ""
+#| "An alternative way to set up your USB stick is to manually copy the "
+#| "installer files, and also an installation image to it. Note that the USB "
+#| "stick should be at least 1 GB in size (smaller setups are possible if you "
+#| "follow <xref linkend=\"usb-copy-flexible\"/>)."
+msgid ""
+"An alternative to the method described in <xref linkend=\"usb-copy-isohybrid"
+"\"/> is to manually copy the installer files, and also an installation image "
+"to the stick. Note that the USB stick should be at least 1 GB in size "
+"(smaller setups are possible using the files from netboot, following <xref "
+"linkend=\"usb-copy-flexible\"/>)."
 msgstr ""
 "Una possibilitat alternativa per a preparar la vostra memòria USB és copiant-"
 "hi els fitxers de l'instal·lador i també una imatge d'instal·lació. Fixeu-"
@@ -548,13 +589,19 @@ msgstr ""
 "\"usb-copy-flexible\"/>)."
 
 #. Tag: para
-#: install-methods.xml:342
-#, no-c-format
+#: install-methods.xml:362
+#, fuzzy, no-c-format
+#| msgid ""
+#| "There is an all-in-one file &hdmedia-boot-img; which contains all the "
+#| "installer files (including the kernel) <phrase arch=\"x86\">as well as "
+#| "<classname>syslinux</classname> and its configuration file</phrase> "
+#| "<phrase arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+#| "configuration file</phrase>."
 msgid ""
 "There is an all-in-one file &hdmedia-boot-img; which contains all the "
-"installer files (including the kernel) <phrase arch=\"x86\">as well as "
-"<classname>syslinux</classname> and its configuration file</phrase> <phrase "
-"arch=\"powerpc\">as well as <classname>yaboot</classname> and its "
+"installer files (including the kernel)<phrase arch=\"x86\"> as well as "
+"<classname>syslinux</classname> and its configuration file</phrase><phrase "
+"arch=\"powerpc\"> as well as <classname>yaboot</classname> and its "
 "configuration file</phrase>."
 msgstr ""
 "Hi ha un fitxer complet &hdmedia-boot-img; que conté tots el fitxers de "
@@ -564,7 +611,7 @@ msgstr ""
 "configuració</phrase>."
 
 #. Tag: para
-#: install-methods.xml:351
+#: install-methods.xml:371
 #, no-c-format
 msgid ""
 "Note that, although convenient, this method does have one major "
@@ -580,20 +627,21 @@ msgstr ""
 "per disposar de tota la seva capacitat."
 
 #. Tag: para
-#: install-methods.xml:359
-#, no-c-format
-msgid "To use this image simply extract it directly to your USB stick:"
+#: install-methods.xml:379
+#, fuzzy, no-c-format
+#| msgid "To use this image simply extract it directly to your USB stick:"
+msgid "Simply extract this image directly to your USB stick:"
 msgstr ""
 "Per utilitzar aquesta imatge heu d'extreure-la directament al llapis USB:"
 
 #. Tag: screen
-#: install-methods.xml:363
+#: install-methods.xml:383
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:365
+#: install-methods.xml:385
 #, no-c-format
 msgid ""
 "Create a partition of type \"Apple_Bootstrap\" on your USB stick using "
@@ -605,14 +653,23 @@ msgstr ""
 "hi la imatge directament:"
 
 #. Tag: screen
-#: install-methods.xml:371
+#: install-methods.xml:391
 #, no-c-format
 msgid "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 msgstr "# zcat boot.img.gz &gt; /dev/<replaceable>sdX2</replaceable>"
 
 #. Tag: para
-#: install-methods.xml:373
-#, no-c-format
+#: install-methods.xml:393
+#, fuzzy, no-c-format
+#| msgid ""
+#| "After that, mount the USB memory stick <phrase arch="
+#| "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
+#| "userinput>),</phrase> <phrase arch=\"powerpc\">(<userinput>mount /dev/"
+#| "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will "
+#| "now have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch="
+#| "\"powerpc\">an HFS filesystem</phrase> on it, and copy a &debian; ISO "
+#| "image (netinst or full CD/DVD) to it. Unmount the stick "
+#| "(<userinput>umount /mnt</userinput>) and you are done."
 msgid ""
 "After that, mount the USB memory stick <phrase arch="
 "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
@@ -620,8 +677,8 @@ msgid ""
 "<replaceable>sdX2</replaceable> /mnt</userinput>),</phrase> which will now "
 "have <phrase arch=\"x86\">a FAT filesystem</phrase> <phrase arch=\"powerpc"
 "\">an HFS filesystem</phrase> on it, and copy a &debian; ISO image (netinst "
-"or full CD/DVD) to it. Unmount the stick (<userinput>umount /mnt</"
-"userinput>) and you are done."
+"or full CD; see <xref linkend=\"official-cdrom\"/>) to it. Unmount the stick "
+"(<userinput>umount /mnt</userinput>) and you are done."
 msgstr ""
 "Després d'això, munteu el llapis de memòria USB <phrase arch="
 "\"x86\">(<userinput>mount /dev/<replaceable>sdX</replaceable> /mnt</"
@@ -633,13 +690,13 @@ msgstr ""
 "(<userinput>umount /mnt</userinput>) i ja esteu preparats."
 
 #. Tag: title
-#: install-methods.xml:390
+#: install-methods.xml:411
 #, no-c-format
 msgid "Manually copying files to the USB stick &mdash; the flexible way"
 msgstr "Còpia dels fitxers &mdash; la manera flexible"
 
 #. Tag: para
-#: install-methods.xml:391
+#: install-methods.xml:412
 #, no-c-format
 msgid ""
 "If you like more flexibility or just want to know what's going on, you "
@@ -654,13 +711,13 @@ msgstr ""
 "podreu copiar-hi una imatge ISO, fins i tot una imatge DVD."
 
 #. Tag: title
-#: install-methods.xml:406 install-methods.xml:528
+#: install-methods.xml:427
 #, no-c-format
-msgid "Partitioning the USB stick"
-msgstr "Fer particions a un llapis USB"
+msgid "Partitioning and adding a boot loader"
+msgstr ""
 
 #. Tag: para
-#: install-methods.xml:407
+#: install-methods.xml:428
 #, no-c-format
 msgid ""
 "We will show how to set up the memory stick to use the first partition, "
@@ -670,19 +727,59 @@ msgstr ""
 "partició d'aquest, en comptes del dispositiu complet."
 
 #. Tag: para
-#: install-methods.xml:412
+#: install-methods.xml:433
+#, no-c-format
+msgid ""
+"In order to start the kernel after booting from the USB stick, we will put a "
+"boot loader on the stick. Although any boot loader should work, it's "
+"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
+"partition and can be reconfigured by just editing a text file. Any operating "
+"system which supports the FAT file system can be used to make changes to the "
+"configuration of the boot loader."
+msgstr ""
+"Per arrencar el nucli després d'arrencar des del llapis USB, posarem un "
+"carregador d'arrencada al llapis. Malgrat que hauria de funcionar qualsevol "
+"carregador, és convenient utilitzar <classname>syslinux</classname>, ja que "
+"utilitza una partició FAT16 i pot reconfigurar-se editant tan sols un fitxer "
+"de text. Qualsevol sistema operatiu que suporti el sistema de fitxers FAT "
+"pot utilitzar-se per canviar la configuració del carregador d'arrencada."
+
+#. Tag: para
+#: install-methods.xml:443
 #, no-c-format
 msgid ""
+"First, you need to install the <classname>syslinux</classname> and "
+"<classname>mtools</classname> packages on your system."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:448
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Since most USB sticks come pre-configured with a single FAT16 partition, "
+#| "you probably won't have to repartition or reformat the stick. If you have "
+#| "to do that anyway, use <command>cfdisk</command> or any other "
+#| "partitioning tool to create a FAT16 partition<footnote> <para> Don't "
+#| "forget to set the <quote>bootable</quote> bootable flag. </para> </"
+#| "footnote>, install an MBR using: <informalexample><screen>\n"
+#| "# install-mbr /dev/<replaceable>sdX</replaceable>\n"
+#| "</screen></informalexample> The <command>install-mbr</command> command is "
+#| "contained in the <classname>mbr</classname> &debian; package. Then create "
+#| "the filesystem using: <informalexample><screen>\n"
+#| "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Take care that you use the correct device "
+#| "name for your USB stick. The <command>mkdosfs</command> command is "
+#| "contained in the <classname>dosfstools</classname> &debian; package."
+msgid ""
 "Since most USB sticks come pre-configured with a single FAT16 partition, you "
 "probably won't have to repartition or reformat the stick. If you have to do "
 "that anyway, use <command>cfdisk</command> or any other partitioning tool to "
-"create a FAT16 partition<footnote> <para> Don't forget to set the "
-"<quote>bootable</quote> bootable flag. </para> </footnote>, install an MBR "
+"create a FAT16 partition now<footnote> <para> Don't forget to activate the "
+"<quote>bootable</quote> flag. </para> </footnote>, and then install an MBR "
 "using: <informalexample><screen>\n"
-"# install-mbr /dev/<replaceable>sdX</replaceable>\n"
-"</screen></informalexample> The <command>install-mbr</command> command is "
-"contained in the <classname>mbr</classname> &debian; package. Then create "
-"the filesystem using: <informalexample><screen>\n"
+"# cat /usr/lib/syslinux/mbr/mbr.bin >/dev/<replaceable>sdX</replaceable>\n"
+"</screen></informalexample> Now create the filesystem using: "
+"<informalexample><screen>\n"
 "# mkdosfs /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Take care that you use the correct device name "
 "for your USB stick. The <command>mkdosfs</command> command is contained in "
@@ -705,30 +802,22 @@ msgstr ""
 "command> és al paquet &debian; <classname>dosfstools</classname>."
 
 #. Tag: para
-#: install-methods.xml:436
-#, no-c-format
-msgid ""
-"In order to start the kernel after booting from the USB stick, we will put a "
-"boot loader on the stick. Although any boot loader should work, it's "
-"convenient to use <classname>syslinux</classname>, since it uses a FAT16 "
-"partition and can be reconfigured by just editing a text file. Any operating "
-"system which supports the FAT file system can be used to make changes to the "
-"configuration of the boot loader."
-msgstr ""
-"Per arrencar el nucli després d'arrencar des del llapis USB, posarem un "
-"carregador d'arrencada al llapis. Malgrat que hauria de funcionar qualsevol "
-"carregador, és convenient utilitzar <classname>syslinux</classname>, ja que "
-"utilitza una partició FAT16 i pot reconfigurar-se editant tan sols un fitxer "
-"de text. Qualsevol sistema operatiu que suporti el sistema de fitxers FAT "
-"pot utilitzar-se per canviar la configuració del carregador d'arrencada."
-
-#. Tag: para
-#: install-methods.xml:446
-#, no-c-format
-msgid ""
-"To put <classname>syslinux</classname> on the FAT16 partition on your USB "
-"stick, install the <classname>syslinux</classname> and <classname>mtools</"
-"classname> packages on your system, and do: <informalexample><screen>\n"
+#: install-methods.xml:471
+#, fuzzy, no-c-format
+#| msgid ""
+#| "To put <classname>syslinux</classname> on the FAT16 partition on your USB "
+#| "stick, install the <classname>syslinux</classname> and <classname>mtools</"
+#| "classname> packages on your system, and do: <informalexample><screen>\n"
+#| "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
+#| "</screen></informalexample> Again, take care that you use the correct "
+#| "device name. The partition must not be mounted when starting "
+#| "<command>syslinux</command>. This procedure writes a boot sector to the "
+#| "partition and creates the file <filename>ldlinux.sys</filename> which "
+#| "contains the boot loader code."
+msgid ""
+"Having a correctly partitioned USB stick (now), you need to put "
+"<classname>syslinux</classname> on the FAT16 partition with: "
+"<informalexample><screen>\n"
 "# syslinux /dev/<replaceable>sdX1</replaceable>\n"
 "</screen></informalexample> Again, take care that you use the correct device "
 "name. The partition must not be mounted when starting <command>syslinux</"
@@ -748,25 +837,47 @@ msgstr ""
 "filename> que conté el codi del carregador d'arrencada."
 
 #. Tag: title
-#: install-methods.xml:463 install-methods.xml:575
-#, no-c-format
-msgid "Adding the installer image"
+#: install-methods.xml:487
+#, fuzzy, no-c-format
+#| msgid "Adding the installer image"
+msgid "Adding the installer files"
 msgstr "Com afegir la imatge de l'instal·lador"
 
 #. Tag: para
-#: install-methods.xml:464
+#: install-methods.xml:488
 #, no-c-format
 msgid ""
-"Mount the partition (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
-"mnt</userinput>) and copy the following installer image files to the stick: "
-"<itemizedlist> <listitem><para> <filename>vmlinuz</filename> or "
-"<filename>linux</filename> (kernel binary) </para></listitem> "
-"<listitem><para> <filename>initrd.gz</filename> (initial ramdisk image) </"
-"para></listitem> </itemizedlist> You can choose between either the text-"
-"based or the graphical version of the installer. The latter can be found in "
-"the <filename>gtk</filename> subdirectory. If you want to rename the files, "
-"please note that <classname>syslinux</classname> can only process DOS (8.3) "
-"file names."
+"There are two different installation variants to choose here: The hd-media "
+"variant needs an installation ISO file on the stick, to load installer "
+"modules and the base system from. The netboot installer however will load "
+"all that from a &debian; mirror."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:495
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick: <itemizedlist> <listitem><para> <filename>vmlinuz</"
+#| "filename> or <filename>linux</filename> (kernel binary) </para></"
+#| "listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+#| "ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+#| "either the text-based or the graphical version of the installer. The "
+#| "latter can be found in the <filename>gtk</filename> subdirectory. If you "
+#| "want to rename the files, please note that <classname>syslinux</"
+#| "classname> can only process DOS (8.3) file names."
+msgid ""
+"According to your choice, you have to download some installer files from the "
+"hd-media or netboot subdirectory of <ulink url=\"&url-debian-installer;images"
+"\">debian/dists/&releasename;/main/installer-&architecture;/current/images/</"
+"ulink> on any &debian; mirror: <itemizedlist> <listitem><para> "
+"<filename>vmlinuz</filename> or <filename>linux</filename> (kernel binary) </"
+"para></listitem> <listitem><para> <filename>initrd.gz</filename> (initial "
+"ramdisk image) </para></listitem> </itemizedlist> You can choose between "
+"either the text-based version of the installer (the files can be found "
+"directly in hd-media or netboot) or the graphical version (look in the "
+"respective <filename>gtk</filename> subdirectories)."
 msgstr ""
 "Munteu la partició (<userinput>mount /dev/<replaceable>sdX1</replaceable> /"
 "mnt</userinput>) i copieu els següents fitxers de la imatge de "
@@ -780,17 +891,43 @@ msgstr ""
 "noms de fitxer de DOS (8.3)."
 
 #. Tag: para
-#: install-methods.xml:488
-#, no-c-format
+#: install-methods.xml:519
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</"
+#| "replaceable> /mnt</userinput>) and copy the following installer image "
+#| "files to the stick:"
 msgid ""
-"Next you should create a <filename>syslinux.cfg</filename> configuration "
-"file, which at a bare minimum should contain the following line (change the "
-"name of the kernel binary to <quote><filename>linux</filename></quote> if "
-"you used a <filename>netboot</filename> image): <informalexample><screen>\n"
+"Then mount the partition (<userinput>mount /dev/<replaceable>sdX1</"
+"replaceable> /mnt</userinput>) and copy the downloaded files to the root "
+"directory of the stick."
+msgstr ""
+"Munteu la partició (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
+"mnt</userinput>) i copieu els fitxers de l'instal·lador següents al llapis "
+"USB:"
+
+#. Tag: para
+#: install-methods.xml:525
+#, fuzzy, no-c-format
+#| msgid ""
+#| "Next you should create a <filename>syslinux.cfg</filename> configuration "
+#| "file, which at a bare minimum should contain the following line (change "
+#| "the name of the kernel binary to <quote><filename>linux</filename></"
+#| "quote> if you used a <filename>netboot</filename> image): "
+#| "<informalexample><screen>\n"
+#| "default vmlinuz initrd=initrd.gz\n"
+#| "</screen></informalexample> For the graphical installer you should add "
+#| "<userinput>vga=788</userinput> to the line. Other parameters can be "
+#| "appended as desired."
+msgid ""
+"Next you should create a text file named <filename>syslinux.cfg</filename> "
+"in the root directory of the stick as configuration file for syslinux, which "
+"at a bare minimum should contain the following line: "
+"<informalexample><screen>\n"
 "default vmlinuz initrd=initrd.gz\n"
-"</screen></informalexample> For the graphical installer you should add "
-"<userinput>vga=788</userinput> to the line. Other parameters can be appended "
-"as desired."
+"</screen></informalexample> Change the name of the kernel binary to "
+"<quote><filename>linux</filename></quote> if you used files from "
+"<filename>netboot</filename>."
 msgstr ""
 "A continuació heu de generar un fitxer de configuració <filename>syslinux."
 "cfg</filename> que haurà de contenir com a mínim les dues línies següents "
@@ -803,7 +940,16 @@ msgstr ""
 "paràmetres si ho desitjau."
 
 #. Tag: para
-#: install-methods.xml:500
+#: install-methods.xml:536
+#, no-c-format
+msgid ""
+"For the graphical installer (from <filename>gtk</filename>) you should add "
+"<userinput>vga=788</userinput> at the end of the line. Other parameters can "
+"be appended as desired."
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:542
 #, no-c-format
 msgid ""
 "To enable the boot prompt to permit further parameter appending, add a "
@@ -813,16 +959,30 @@ msgstr ""
 "addicionals, afegiu la línia <userinput>prompt 1</userinput>."
 
 #. Tag: para
-#: install-methods.xml:505
+#: install-methods.xml:547
 #, no-c-format
 msgid ""
-"If you used an <filename>hd-media</filename> image, you should now copy the "
-"ISO file of a &debian; ISO image<footnote> <para> You can use either a "
-"netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/>). Be "
-"sure to select one that fits. Note that the <quote>netboot <filename>mini."
-"iso</filename></quote> image is not usable for this purpose. </para> </"
-"footnote> onto the stick. When you are done, unmount the USB memory stick "
-"(<userinput>umount /mnt</userinput>)."
+"If you used files from <filename>hd-media</filename>, you should now copy "
+"the ISO file of a &debian; installation image onto the stick. (For the "
+"<filename>netboot</filename> variant this is not needed.)"
+msgstr ""
+
+#. Tag: para
+#: install-methods.xml:553
+#, fuzzy, no-c-format
+#| msgid ""
+#| "If you used an <filename>hd-media</filename> image, you should now copy "
+#| "the ISO file of a &debian; ISO image<footnote> <para> You can use either "
+#| "a netinst or a full CD/DVD image (see <xref linkend=\"official-cdrom\"/"
+#| ">). Be sure to select one that fits. Note that the <quote>netboot "
+#| "<filename>mini.iso</filename></quote> image is not usable for this "
+#| "purpose. </para> </footnote> onto the stick. When you are done, unmount "
+#| "the USB memory stick (<userinput>umount /mnt</userinput>)."
+msgid ""
+"You can use either a netinst or a full CD/DVD image (see <xref linkend="
+"\"official-cdrom\"/>). Be sure to select one that fits on your stick. Note "
+"that the <quote>netboot <filename>mini.iso</filename></quote> image is not "
+"usable for this purpose."
 msgstr ""
 "Si heu emprat una imatge <filename>hd-media</filename>, ara heu de copiar "
 "una imatge ISO de &debian;<footnote> <para> Podeu emprar una imatge "
@@ -833,7 +993,21 @@ msgstr ""
 "el llapis de memòria USB (<userinput>umount /mnt</userinput>)."
 
 #. Tag: para
-#: install-methods.xml:529
+#: install-methods.xml:560
+#, no-c-format
+msgid ""
+"When you are done, unmount the USB memory stick (<userinput>umount /mnt</"
+"userinput>)."
+msgstr ""
+
+#. Tag: title
+#: install-methods.xml:573
+#, no-c-format
+msgid "Partitioning the USB stick"
+msgstr "Fer particions a un llapis USB"
+
+#. Tag: para
+#: install-methods.xml:574
 #, no-c-format
 msgid ""
 "Most USB sticks do not come pre-configured in such a way that Open Firmware "
@@ -863,7 +1037,7 @@ msgstr ""
 "command> està al paquet &debian; <classname>hfsutils</classname>."
 
 #. Tag: para
-#: install-methods.xml:546
+#: install-methods.xml:591
 #, no-c-format
 msgid ""
 "In order to start the kernel after booting from the USB stick, we will put a "
@@ -880,7 +1054,7 @@ msgstr ""
 "canvis a la configuració del carregador d'arrencada."
 
 #. Tag: para
-#: install-methods.xml:555
+#: install-methods.xml:600
 #, no-c-format
 msgid ""
 "The normal <command>ybin</command> tool that comes with <command>yaboot</"
@@ -915,8 +1089,14 @@ msgstr ""
 "Firmware la pugui arrencar. Fent açò, la resta del dispositiu USB es podria "
 "preparar per fer ús de les utilitats Unix normals."
 
+#. Tag: title
+#: install-methods.xml:620
+#, no-c-format
+msgid "Adding the installer image"
+msgstr "Com afegir la imatge de l'instal·lador"
+
 #. Tag: para
-#: install-methods.xml:576
+#: install-methods.xml:621
 #, no-c-format
 msgid ""
 "Mount the partition (<userinput>mount /dev/<replaceable>sdX2</replaceable> /"
@@ -927,31 +1107,31 @@ msgstr ""
 "USB:"
 
 #. Tag: para
-#: install-methods.xml:583
+#: install-methods.xml:628
 #, no-c-format
 msgid "<filename>vmlinux</filename> (kernel binary)"
 msgstr "<filename>vmlinux</filename> (binari del nucli)"
 
 #. Tag: para
-#: install-methods.xml:588
+#: install-methods.xml:633
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (initial ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (imatge inicial del disc RAM)"
 
 #. Tag: para
-#: install-methods.xml:593
+#: install-methods.xml:638
 #, no-c-format
 msgid "<filename>yaboot.conf</filename> (yaboot configuration file)"
 msgstr "<filename>yaboot.conf</filename> (fitxer de configuració del yaboot)"
 
 #. Tag: para
-#: install-methods.xml:598
+#: install-methods.xml:643
 #, no-c-format
 msgid "<filename>boot.msg</filename> (optional boot message)"
 msgstr "<filename>boot.msg</filename> (missatge opcional d'arrencada)"
 
 #. Tag: para
-#: install-methods.xml:605
+#: install-methods.xml:650
 #, no-c-format
 msgid ""
 "The <filename>yaboot.conf</filename> configuration file should contain the "
@@ -987,7 +1167,7 @@ msgstr ""
 "arrencant."
 
 #. Tag: para
-#: install-methods.xml:615
+#: install-methods.xml:660
 #, no-c-format
 msgid ""
 "If you used an <filename>hd-media</filename> image, you should now copy the "
@@ -1007,13 +1187,13 @@ msgstr ""
 "el llapis de memòria USB (<userinput>umount /mnt</userinput>)."
 
 #. Tag: title
-#: install-methods.xml:643
+#: install-methods.xml:688
 #, no-c-format
 msgid "Preparing Files for Hard Disk Booting"
 msgstr "Preparació dels fitxers per arrencar des del disc dur"
 
 #. Tag: para
-#: install-methods.xml:644
+#: install-methods.xml:689
 #, no-c-format
 msgid ""
 "The installer may be booted using boot files placed on an existing hard "
@@ -1029,7 +1209,7 @@ msgstr ""
 "d'arranc."
 
 #. Tag: para
-#: install-methods.xml:652
+#: install-methods.xml:697
 #, no-c-format
 msgid ""
 "A full, <quote>pure network</quote> installation can be achieved using this "
@@ -1041,7 +1221,7 @@ msgstr ""
 "extraïbles, com trobar i gravar imatges de CD/DVD."
 
 #. Tag: para
-#: install-methods.xml:658
+#: install-methods.xml:703
 #, no-c-format
 msgid ""
 "The installer cannot boot from files on an HFS+ file system. MacOS System "
@@ -1063,7 +1243,7 @@ msgstr ""
 "i Linux, en particular els fitxers d'instal·lació que descarregueu."
 
 #. Tag: para
-#: install-methods.xml:669
+#: install-methods.xml:714
 #, no-c-format
 msgid ""
 "Different programs are used for hard disk installation system booting, "
@@ -1075,7 +1255,7 @@ msgstr ""
 "<quote>OldWorld</quote>."
 
 #. Tag: title
-#: install-methods.xml:678
+#: install-methods.xml:723
 #, no-c-format
 msgid "Hard disk installer booting from Linux using <command>GRUB</command>"
 msgstr ""
@@ -1083,7 +1263,7 @@ msgstr ""
 "<command>GRUB</command>"
 
 #. Tag: para
-#: install-methods.xml:680
+#: install-methods.xml:725
 #, no-c-format
 msgid ""
 "This section explains how to add to or even replace an existing linux "
@@ -1093,7 +1273,7 @@ msgstr ""
 "utilitzant <command>GRUB</command>."
 
 #. Tag: para
-#: install-methods.xml:686
+#: install-methods.xml:731
 #, no-c-format
 msgid ""
 "At boot time, <command>GRUB</command> supports loading in memory not only "
@@ -1105,7 +1285,7 @@ msgstr ""
 "utilitzat pel nucli com el sistema de fitxers arrel."
 
 #. Tag: para
-#: install-methods.xml:692
+#: install-methods.xml:737
 #, no-c-format
 msgid ""
 "Copy the following files from the &debian; archives to a convenient location "
@@ -1115,19 +1295,19 @@ msgstr ""
 "vostre disc dur, per exemple a <filename>/boot/newinstall/</filename>."
 
 #. Tag: para
-#: install-methods.xml:699
+#: install-methods.xml:744
 #, no-c-format
 msgid "<filename>vmlinuz</filename> (kernel binary)"
 msgstr "<filename>vmlinuz</filename> (imatge del nucli)"
 
 #. Tag: para
-#: install-methods.xml:704
+#: install-methods.xml:749
 #, no-c-format
 msgid "<filename>initrd.gz</filename> (ramdisk image)"
 msgstr "<filename>initrd.gz</filename> (imatge del disc RAM)"
 
 #. Tag: para
-#: install-methods.xml:711
+#: install-methods.xml:756
 #, no-c-format
 msgid ""
 "If you intend to use the hard drive only for booting and then download "
@@ -1143,7 +1323,7 @@ msgstr ""
 "molt de compte."
 
 #. Tag: para
-#: install-methods.xml:720
+#: install-methods.xml:765
 #, no-c-format
 msgid ""
 "Alternatively, if you intend to keep an existing partition on the hard drive "
@@ -1161,7 +1341,7 @@ msgstr ""
 "la imatge d'instal·lació sense necessitar la xarxa."
 
 #. Tag: para
-#: install-methods.xml:728
+#: install-methods.xml:773
 #, no-c-format
 msgid ""
 "Finally, to configure the bootloader proceed to <xref linkend=\"boot-initrd"
@@ -1171,7 +1351,7 @@ msgstr ""
 "initrd\"/>."
 
 #. Tag: title
-#: install-methods.xml:738
+#: install-methods.xml:783
 #, no-c-format
 msgid "Hard disk installer booting from DOS using <command>loadlin</command>"
 msgstr ""
@@ -1179,7 +1359,7 @@ msgstr ""
 "<command>loadlin</command>"
 
 #. Tag: para
-#: install-methods.xml:739
+#: install-methods.xml:784
 #, no-c-format
 msgid ""
 "This section explains how to prepare your hard drive for booting the "
@@ -1189,7 +1369,7 @@ msgstr ""
 "instal·lació des de DOS fent servir <command>loadlin</command>."
 
 #. Tag: para
-#: install-methods.xml:744
+#: install-methods.xml:789
 #, no-c-format
 msgid ""
 "Copy the following directories from a &debian; installation image to "
@@ -1199,7 +1379,7 @@ msgstr ""
 "<filename>c:\\</filename>."
 
 #. Tag: para
-#: install-methods.xml:749
+#: install-methods.xml:794
 #, no-c-format
 msgid ""
 "<filename>/&x86-install-dir;</filename> (kernel binary and ramdisk image)"
@@ -1208,19 +1388,19 @@ msgstr ""
 "de memòria)"
 
 #. Tag: para
-#: install-methods.xml:754
+#: install-methods.xml:799
 #, no-c-format
 msgid "<filename>/tools</filename> (loadlin tool)"
 msgstr "<filename>/tools</filename> (eina «loadlin»)"
 
 #. Tag: title
-#: install-methods.xml:866
+#: install-methods.xml:911
 #, no-c-format
 msgid "Preparing Files for TFTP Net Booting"
 msgstr "Preparació dels fitxers per a l'arrencada en xarxa TFTP"
 
 #. Tag: para
-#: install-methods.xml:867
+#: install-methods.xml:912
 #, no-c-format
 msgid ""
 "If your machine is connected to a local area network, you may be able to "
@@ -1236,7 +1416,7 @@ msgstr ""
 "configurar-se a fi de permetre l'arrencada de la vostra."
 
 #. Tag: para
-#: install-methods.xml:875
+#: install-methods.xml:920
 #, no-c-format
 msgid ""
 "You need to set up a TFTP server, and for many machines a DHCP server<phrase "
@@ -1248,7 +1428,7 @@ msgstr ""
 "phrase><phrase condition=\"supports-bootp\">, o un servidor BOOTP</phrase>."
 
 #. Tag: para
-#: install-methods.xml:882
+#: install-methods.xml:927
 #, no-c-format
 msgid ""
 "<phrase condition=\"supports-rarp\">The Reverse Address Resolution Protocol "
@@ -1269,7 +1449,7 @@ msgstr ""
 "BOOTP. Alguns sistemes només es poden configurar fent servir el DHCP."
 
 #. Tag: para
-#: install-methods.xml:896
+#: install-methods.xml:941
 #, no-c-format
 msgid ""
 "For PowerPC, if you have a NewWorld Power Macintosh machine, it is a good "
@@ -1281,7 +1461,7 @@ msgstr ""
 "arrencar si empreu el BOOTP."
 
 #. Tag: para
-#: install-methods.xml:902
+#: install-methods.xml:947
 #, no-c-format
 msgid ""
 "Some older HPPA machines (e.g. 715/75) use RBOOTD rather than BOOTP. There "
@@ -1291,7 +1471,7 @@ msgstr ""
 "BOOTP. Hi ha un paquet <classname>rbootd</classname> a l'abast en &debian;."
 
 #. Tag: para
-#: install-methods.xml:907
+#: install-methods.xml:952
 #, no-c-format
 msgid ""
 "The Trivial File Transfer Protocol (TFTP) is used to serve the boot image to "
@@ -1306,7 +1486,7 @@ msgstr ""
 "SunOS 5.x (àlies Solaris) i el GNU/Linux."
 
 #. Tag: para
-#: install-methods.xml:915
+#: install-methods.xml:960
 #, no-c-format
 msgid ""
 "For a &debian-gnu; server we recommend <classname>tftpd-hpa</classname>. "
@@ -1320,13 +1500,13 @@ msgstr ""
 "de donar. Una bona alternativa és <classname>atftpd</classname>."
 
 #. Tag: title
-#: install-methods.xml:931
+#: install-methods.xml:976
 #, no-c-format
 msgid "Setting up RARP server"
 msgstr "Configuració d'un servidor RARP"
 
 #. Tag: para
-#: install-methods.xml:932
+#: install-methods.xml:977
 #, no-c-format
 msgid ""
 "To set up RARP, you need to know the Ethernet address (a.k.a. the MAC "
@@ -1344,7 +1524,7 @@ msgstr ""
 "<userinput>ip addr show dev eth0</userinput>."
 
 #. Tag: para
-#: install-methods.xml:944
+#: install-methods.xml:989
 #, no-c-format
 msgid ""
 "On a RARP server system using a Linux kernel or Solaris/SunOS, you use the "
@@ -1368,13 +1548,13 @@ msgstr ""
 "rarpd -a</userinput> al SunOS 4 (Solaris 1)."
 
 #. Tag: title
-#: install-methods.xml:965
+#: install-methods.xml:1010
 #, no-c-format
 msgid "Setting up a DHCP server"
 msgstr "Configurar un servidor DHCP"
 
 #. Tag: para
-#: install-methods.xml:966
+#: install-methods.xml:1011
 #, no-c-format
 msgid ""
 "One free software DHCP server is ISC <command>dhcpd</command>. For &debian-"
@@ -1388,7 +1568,7 @@ msgstr ""
 "lo (normalment <filename>/etc/dhcpd3/dhcpd.conf</filename>):"
 
 #. Tag: screen
-#: install-methods.xml:973
+#: install-methods.xml:1018
 #, no-c-format
 msgid ""
 "option domain-name \"example.com\";\n"
@@ -1432,7 +1612,7 @@ msgstr ""
 "}"
 
 #. Tag: para
-#: install-methods.xml:975
+#: install-methods.xml:1020
 #, no-c-format
 msgid ""
 "In this example, there is one server <replaceable>servername</replaceable> "
@@ -1450,7 +1630,7 @@ msgstr ""
 "descarregarà per TFTP."
 
 #. Tag: para
-#: install-methods.xml:985
+#: install-methods.xml:1030
 #, no-c-format
 msgid ""
 "After you have edited the <command>dhcpd</command> configuration file, "
@@ -1460,13 +1640,13 @@ msgstr ""
 "reengegueu-lo amb <userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:993
+#: install-methods.xml:1038
 #, no-c-format
 msgid "Enabling PXE Booting in the DHCP configuration"
 msgstr "Habilitar l'arrencada amb PXE a la configuració del servidor de DHCP"
 
 #. Tag: para
-#: install-methods.xml:994
+#: install-methods.xml:1039
 #, no-c-format
 msgid ""
 "Here is another example for a <filename>dhcp.conf</filename> using the Pre-"
@@ -1538,7 +1718,7 @@ msgstr ""
 "més endavant)."
 
 #. Tag: para
-#: install-methods.xml:1004
+#: install-methods.xml:1049
 #, no-c-format
 msgid ""
 "If your machine uses UEFI to boot, you will have to specify a boot loader "
@@ -1548,7 +1728,7 @@ msgstr ""
 "d'arranc apropiat per a màquines UEFI, per exemple"
 
 #. Tag: screen
-#: install-methods.xml:1008
+#: install-methods.xml:1053
 #, no-c-format
 msgid ""
 "group {\n"
@@ -1570,13 +1750,13 @@ msgstr ""
 "}"
 
 #. Tag: title
-#: install-methods.xml:1021
+#: install-methods.xml:1066
 #, no-c-format
 msgid "Setting up a BOOTP server"
 msgstr "Configurar un servidor BOOTP"
 
 #. Tag: para
-#: install-methods.xml:1022
+#: install-methods.xml:1067
 #, no-c-format
 msgid ""
 "There are two BOOTP servers available for GNU/Linux. The first is CMU "
@@ -1591,7 +1771,7 @@ msgstr ""
 "i <classname>isc-dhcp-server</classname> respectivament."
 
 #. Tag: para
-#: install-methods.xml:1030
+#: install-methods.xml:1075
 #, no-c-format
 msgid ""
 "To use CMU <command>bootpd</command>, you must first uncomment (or add) the "
@@ -1655,7 +1835,7 @@ msgstr ""
 "userinput> és l'adreça màquina (MAC).</phrase>"
 
 #. Tag: para
-#: install-methods.xml:1063
+#: install-methods.xml:1108
 #, no-c-format
 msgid ""
 "By contrast, setting up BOOTP with ISC <command>dhcpd</command> is really "
@@ -1679,13 +1859,13 @@ msgstr ""
 "<userinput>/etc/init.d/isc-dhcp-server restart</userinput>."
 
 #. Tag: title
-#: install-methods.xml:1082
+#: install-methods.xml:1127
 #, no-c-format
 msgid "Enabling the TFTP Server"
 msgstr "Habilitació del servidor TFTP"
 
 #. Tag: para
-#: install-methods.xml:1083
+#: install-methods.xml:1128
 #, no-c-format
 msgid ""
 "To get the TFTP server ready to go, you should first make sure that "
@@ -1695,7 +1875,7 @@ msgstr ""
 "activat el <command>tftpd</command>."
 
 #. Tag: para
-#: install-methods.xml:1088
+#: install-methods.xml:1133
 #, no-c-format
 msgid ""
 "In the case of <classname>tftpd-hpa</classname> there are two ways the "
@@ -1711,7 +1891,7 @@ msgstr ""
 "ser canviat reconfigurant aquest."
 
 #. Tag: para
-#: install-methods.xml:1097
+#: install-methods.xml:1142
 #, no-c-format
 msgid ""
 "Historically, TFTP servers used <filename>/tftpboot</filename> as directory "
@@ -1730,7 +1910,7 @@ msgstr ""
 "exemples de configuració d'aquesta secció en conseqüència."
 
 #. Tag: para
-#: install-methods.xml:1107
+#: install-methods.xml:1152
 #, no-c-format
 msgid ""
 "All <command>in.tftpd</command> alternatives available in &debian; should "
@@ -1747,7 +1927,7 @@ msgstr ""
 "d'inici al diagnòstic de la causa dels problemes."
 
 #. Tag: para
-#: install-methods.xml:1115
+#: install-methods.xml:1160
 #, no-c-format
 msgid ""
 "If you intend to install &debian; on an SGI machine and your TFTP server is "
@@ -1778,13 +1958,13 @@ msgstr ""
 "el servidor TFTP de Linux."
 
 #. Tag: title
-#: install-methods.xml:1137
+#: install-methods.xml:1182
 #, no-c-format
 msgid "Move TFTP Images Into Place"
 msgstr "Posar les imatges del TFTP al seu lloc"
 
 #. Tag: para
-#: install-methods.xml:1138
+#: install-methods.xml:1183
 #, no-c-format
 msgid ""
 "Next, place the TFTP boot image you need, as found in <xref linkend=\"where-"
@@ -1801,7 +1981,7 @@ msgstr ""
 "no hi existeix cap norma ben establerta."
 
 #. Tag: para
-#: install-methods.xml:1147
+#: install-methods.xml:1192
 #, no-c-format
 msgid ""
 "On NewWorld Power Macintosh machines, you will need to set up the "
@@ -1817,37 +1997,37 @@ msgstr ""
 "del directori <filename>netboot/</filename>:"
 
 #. Tag: filename
-#: install-methods.xml:1158
+#: install-methods.xml:1203
 #, no-c-format
 msgid "vmlinux"
 msgstr "vmlinux"
 
 #. Tag: filename
-#: install-methods.xml:1163
+#: install-methods.xml:1208
 #, no-c-format
 msgid "initrd.gz"
 msgstr "initrd.gz"
 
 #. Tag: filename
-#: install-methods.xml:1168
+#: install-methods.xml:1213
 #, no-c-format
 msgid "yaboot"
 msgstr "yaboot"
 
 #. Tag: filename
-#: install-methods.xml:1173
+#: install-methods.xml:1218
 #, no-c-format
 msgid "yaboot.conf"
 msgstr "yaboot.conf"
 
 #. Tag: filename
-#: install-methods.xml:1178
+#: install-methods.xml:1223
 #, no-c-format
 msgid "boot.msg"
 msgstr "boot.msg"
 
 #. Tag: para
-#: install-methods.xml:1183
+#: install-methods.xml:1228
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1867,7 +2047,7 @@ msgstr ""
 "bootnetx64.efi</filename>)."
 
 #. Tag: para
-#: install-methods.xml:1193
+#: install-methods.xml:1238
 #, no-c-format
 msgid ""
 "For PXE booting, everything you should need is set up in the "
@@ -1883,13 +2063,13 @@ msgstr ""
 "command> com a nom del fitxer d'arrencada."
 
 #. Tag: title
-#: install-methods.xml:1205
+#: install-methods.xml:1250
 #, no-c-format
 msgid "SPARC TFTP Booting"
 msgstr "Arrencada TFTP de l'SPARC"
 
 #. Tag: para
-#: install-methods.xml:1206
+#: install-methods.xml:1251
 #, no-c-format
 msgid ""
 "Some SPARC architectures add the subarchitecture names, such as "
@@ -1920,7 +2100,7 @@ msgstr ""
 "subarquitectura."
 
 #. Tag: para
-#: install-methods.xml:1222
+#: install-methods.xml:1267
 #, no-c-format
 msgid ""
 "If you've done all this correctly, giving the command <userinput>boot net</"
@@ -1934,7 +2114,7 @@ msgstr ""
 "el nom de la imatge que s'ha demanat."
 
 #. Tag: para
-#: install-methods.xml:1229
+#: install-methods.xml:1274
 #, no-c-format
 msgid ""
 "You can also force some sparc systems to look for a specific file name by "
@@ -1948,13 +2128,13 @@ msgstr ""
 "servidor TFTP."
 
 #. Tag: title
-#: install-methods.xml:1240
+#: install-methods.xml:1285
 #, no-c-format
 msgid "SGI TFTP Booting"
 msgstr "Arrencada TFTP dels SGI"
 
 #. Tag: para
-#: install-methods.xml:1241
+#: install-methods.xml:1286
 #, no-c-format
 msgid ""
 "On SGI machines you can rely on the <command>bootpd</command> to supply the "
@@ -1968,13 +2148,13 @@ msgstr ""
 "dhcpd.conf</filename>."
 
 #. Tag: title
-#: install-methods.xml:1349
+#: install-methods.xml:1394
 #, no-c-format
 msgid "Automatic Installation"
 msgstr "Instal·lació automàtica"
 
 #. Tag: para
-#: install-methods.xml:1350
+#: install-methods.xml:1395
 #, no-c-format
 msgid ""
 "For installing on multiple computers it's possible to do fully automatic "
@@ -1991,13 +2171,13 @@ msgstr ""
 "més detallada."
 
 #. Tag: title
-#: install-methods.xml:1362
+#: install-methods.xml:1407
 #, no-c-format
 msgid "Automatic Installation Using the &debian; Installer"
 msgstr "Instal·lació automàtica utilitzant l'instal·lador de &debian;"
 
 #. Tag: para
-#: install-methods.xml:1363
+#: install-methods.xml:1408
 #, no-c-format
 msgid ""
 "The &debian; Installer supports automating installs via preconfiguration "
@@ -2012,7 +2192,7 @@ msgstr ""
 "d'instal·lació."
 
 #. Tag: para
-#: install-methods.xml:1370
+#: install-methods.xml:1415
 #, no-c-format
 msgid ""
 "Full documentation on preseeding including a working example that you can "
@@ -2022,13 +2202,13 @@ msgstr ""
 "exemple funcional que podeu editar, a <xref linkend=\"appendix-preseed\"/>."
 
 #. Tag: title
-#: install-methods.xml:1384
+#: install-methods.xml:1429
 #, no-c-format
 msgid "Verifying the integrity of installation files"
 msgstr "Verificant la integritat dels arxius d'instal·lació"
 
 #. Tag: para
-#: install-methods.xml:1386
+#: install-methods.xml:1431
 #, no-c-format
 msgid ""
 "You can verify the integrity of downloaded files against checksums provided "
@@ -2043,7 +2223,7 @@ msgstr ""
 "llocs:"
 
 #. Tag: para
-#: install-methods.xml:1397
+#: install-methods.xml:1442
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2053,7 +2233,7 @@ msgstr ""
 "cd/\">sumes de verificació per a les imatges de CD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1403
+#: install-methods.xml:1448
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2063,7 +2243,7 @@ msgstr ""
 "dvd/\">sumes de verificació per a les imatges de DVD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1409
+#: install-methods.xml:1454
 #, no-c-format
 msgid ""
 "<ulink url=\"https://cdimage.debian.org/debian-cd/current/&architecture;/iso-"
@@ -2073,7 +2253,7 @@ msgstr ""
 "bd/\">sumes de verificació per a les imatges BD</ulink>,"
 
 #. Tag: para
-#: install-methods.xml:1415
+#: install-methods.xml:1460
 #, no-c-format
 msgid ""
 "<ulink url=\"http://http.us.debian.org/debian/dists/&releasename;/main/"
@@ -2085,7 +2265,7 @@ msgstr ""
 "d'altres arxius d'instal·lació</ulink>."
 
 #. Tag: para
-#: install-methods.xml:1423
+#: install-methods.xml:1468
 #, no-c-format
 msgid ""
 "To compute the checksum of a downloaded installation file, use "
@@ -2107,7 +2287,7 @@ msgstr ""
 "<filename>SHA512SUMS</filename>."
 
 #. Tag: para
-#: install-methods.xml:1436
+#: install-methods.xml:1481
 #, no-c-format
 msgid ""
 "The <ulink url=\"&url-debian-cd-faq;\">Debian CD FAQ</ulink> has <ulink url="
@@ -2125,6 +2305,26 @@ msgstr ""
 "sumes de verificació."
 
 #~ msgid ""
+#~ "Create a second, FAT partition on the stick, mount the partition and copy "
+#~ "or unpack the firmware onto it. For example:"
+#~ msgstr ""
+#~ "Generau una segona partició FAT en la memòria USB, monteu la partició i "
+#~ "copiau o descomprimiu el microprogramari en ella. Per exemple:"
+
+#~ msgid ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>/path/to/</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+#~ msgstr ""
+#~ "# mount /dev/<replaceable>sdX2</replaceable> /mnt\n"
+#~ "# cd /mnt\n"
+#~ "# tar zxvf <replaceable>adreça a</replaceable>firmware.tar.gz\n"
+#~ "# cd /\n"
+#~ "# umount /mnt"
+
+#~ msgid ""
 #~ "Hard disk installer booting from Linux using <command>LILO</command> or "
 #~ "<command>GRUB</command>"
 #~ msgstr ""