Remove obsoleted documents

9 files changed, 0 insertions, 1049 deletions

diff --git a/fi/appendix/example-preseed-sarge.xml b/fi/appendix/example-preseed-sarge.xml
deleted file mode 100644
index 3d79dda57..000000000
--- a/fi/appendix/example-preseed-sarge.xml
+++ /dev/null
@@ -1,366 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 30372 untranslated -->
-
-<informalexample condition="sarge"><screen>
-#### Startup.
-
-# To use a preseed file, you'll first need to boot the installer,
-# and tell it what preseed file to use. This is done by passing the
-# kernel a boot parameter, either manually at boot or by editing the
-# syslinux.cfg (or similar) file and adding the parameter to the end
-# of the append line(s) for the kernel.
-#
-# If you're netbooting, use this:
-#   preseed/url=http://host/path/to/preseed
-# If you're remastering a CD, you could use this:
-#   preseed/file=/cdrom/preseed
-# If you're installing from USB media, use this, and put the preseed file
-# in the toplevel directory of the USB stick.
-#   preseed/file=/hd-media/preseed
-# Be sure to copy this file to the location you specify.
-#
-# Some parts of the installation process cannot be automated using
-# some forms of preseeding, because the questions are asked before
-# the preseed file is loaded. For example, if the preseed file is
-# downloaded over the network, the network setup must be done first.
-# One reason to use initrd preseeding is that it allows preseeding
-# of even these early steps of the installation process.
-#
-# If a preseed file cannot be used to preseed some steps, the install can
-# still be fully automated, since you can pass preseed values to the kernel
-# on the command line. Just pass path/to/var=value for any of the preseed
-# variables listed below.
-#
-# While you're at it, you may want to throw a debconf/priority=critical in
-# there, to avoid most questions even if the preseeding below misses some.
-# And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit
-# enter to boot the installer.
-#
-# Note that the kernel accepts a maximum of 8 command line options and
-# 8 environment options (including any options added by default for the
-# installer). If these numbers are exceeded, 2.4 kernels will drop any
-# excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer,
-# you can use 32 command line options and 32 environment options.
-#
-# Some of the default options, like 'vga=normal' may be safely removed
-# for most installations, which may allow you to add more options for
-# preseeding.
-
-# It is not possible to use preseeding to set language, country, and
-# keyboard. Instead you should use kernel parameters. Example:
-# languagechooser/language-name=English
-# countrychooser/shortlist=US
-# console-keymaps-at/keymap=us
-
-#### Network configuration.
-
-# Of course, this won't work if you're loading your preseed file from the
-# network! But it's great if you're booting from CD or USB stick. You can
-# also pass network config parameters in on the kernel params if you are
-# loading preseed files from the network.
-
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, here's how:
-#d-i netcfg/disable_dhcp boolean true
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Note that any hostname and domain names assigned from dhcp take
-# precedence over values set here. However, setting the values still
-# prevents the questions from being shown even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-#### Mirror settings.
-
-d-i mirror/country string enter information manually
-d-i mirror/http/hostname string http.us.debian.org
-d-i mirror/http/directory string /debian
-d-i mirror/suite string testing
-d-i mirror/http/proxy string
-
-#### Partitioning.
-
-# If the system has free space you can choose to only partition that space.
-#d-i partman-auto/init_automatically_partition \
-#    select Use the largest continuous free space
-
-# Alternatively, you can specify a disk to partition. The device name can
-# be given in either devfs or traditional non-devfs format.
-# For example, to use the first disk devfs knows of:
-d-i partman-auto/disk string /dev/discs/disc0/disc
-
-# You can choose from any of the predefined partitioning recipes:
-d-i partman-auto/choose_recipe select \
-     All files in one partition (recommended for new users)
-#d-i partman-auto/choose_recipe select Desktop machine
-#d-i partman-auto/choose_recipe select Multi-user workstation
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe in one line. This example creates
-# a small /boot partition, suitable swap, and uses the rest of the space
-# for the root partition:
-#d-i partman-auto/expert_recipe string boot-root :: \
-#    20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } \
-#    use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . \
-#    500 10000 1000000000 ext3 method{ format } format{ } \
-#    use_filesystem{ } filesystem{ ext3 } mountpoint{ / } . \
-#    64 512 300% linux-swap method{ swap } format{ } .
-# For reference, here is that same recipe in a more readable form:
-#    boot-root ::
-#       40 50 100 ext3
-#          $primary{ } $bootable{ }
-#          method{ format } format{ }
-#          use_filesystem{ } filesystem{ ext3 }
-#          mountpoint{ /boot }
-#       .
-#       500 10000 1000000000 ext3
-#          method{ format } format{ }
-#          use_filesystem{ } filesystem{ ext3 }
-#          mountpoint{ / }
-#       .
-#       64 512 300% linux-swap
-#          method{ swap } format{ }
-#       .
-
-# This makes partman automatically partition without confirmation.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition select \
-    Finish partitioning and write changes to disk
-d-i partman/confirm boolean true
-
-#### Boot loader installation.
-
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if if finds some other OS
-# too, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/bootdev  string (hd0,0)
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-
-#### Finishing up the first stage install.
-
-# Avoid that last message about the install being complete.
-d-i prebaseconfig/reboot_in_progress note
-
-#### Shell commands.
-
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preseed file like this one. Only use preseed files from trusted
-# locations! To drive that home, and because it's generally useful, here's
-# a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory.
-#d-i preseed/late_command string echo foo > /target/etc/bar
-
-# This command is run just as base-config is starting up.
-#base-config base-config/early_command string echo hi mom
-
-# This command is run after base-config is done, just before the login:
-# prompt. This is a good way to install a set of packages you want, or to
-# tweak the configuration of the system.
-#base-config base-config/late_command string \
-#    apt-get install zsh; chsh -s /bin/zsh
-
-###### Preseeding the 2nd stage of the installation.
-
-#### Preseeding base-config.
-
-# Avoid the introductory message.
-base-config base-config/intro note
-
-# Avoid the final message.
-base-config base-config/login note
-
-# If you installed a display manager, but don't want to start it immediately
-# after base-config finishes.
-#base-config base-config/start-display-manager boolean false
-
-# Some versions of the installer can report back on what you've installed.
-# The default is not to report back, but sending reports helps the project
-# determine what software is most popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-#### Clock and time zone setup.
-
-# Controls whether or not the hardware clock is set to UTC.
-#base-config tzconfig/gmt boolean true
-# If you told the installer that you're in the United States, then you
-# can set the time zone using this variable.
-# (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii,
-# Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, other)
-#base-config tzconfig/choose_country_zone/US select Eastern
-# If you told it you're in Canada.
-# (Choices are: Newfoundland, Atlantic, Eastern, Central,
-# East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other)
-#base-config tzconfig/choose_country_zone/CA select Eastern
-# If you told it you're in Brazil. (Choices are: East, West, Acre,
-# DeNoronha, other)
-#base-config tzconfig/choose_country_zone/BR select East
-# Many countries have only one time zone. If you told the installer you're
-# in one of those countries, you can choose its standard time zone via this
-# question.
-#base-config tzconfig/choose_country_zone_single boolean true
-# This question is asked as a fallback for countries other than those
-# listed above, which have more than one time zone. You can preseed one of
-# the time zones, or "other".
-#base-config tzconfig/choose_country_zone_multiple select
-
-#### Account setup.
-
-# To preseed the root password, you have to put it in the clear in this
-# file. That is not a very good idea, use caution!
-#passwd passwd/root-password password r00tme
-#passwd passwd/root-password-again password r00tme
-
-# If you want to skip creation of a normal user account.
-#passwd passwd/make-user boolean false
-
-# Alternatively, you can preseed the user's name and login.
-#passwd passwd/user-fullname string Debian User
-#passwd passwd/username string debian
-# And their password, but use caution!
-#passwd passwd/user-password password insecure
-#passwd passwd/user-password-again password insecure
-
-#### Apt setup.
-
-# This question controls what source the second stage installation uses
-# for packages. Choices are cdrom, http, ftp, filesystem, edit sources list
-# by hand
-base-config apt-setup/uri_type select http
-
-# If you choose ftp or http, you'll be asked for a country and a mirror.
-base-config apt-setup/country select enter information manually
-base-config apt-setup/hostname string http.us.debian.org
-base-config apt-setup/directory string /debian
-# Stop after choosing one mirror.
-base-config apt-setup/another boolean false
-
-# You can choose to install non-free and contrib software.
-#base-config apt-setup/non-free boolean true
-#base-config apt-setup/contrib boolean true
-
-# Do enable security updates.
-base-config apt-setup/security-updates boolean true
-
-#### Package selection.
-
-# You can choose to install any combination of tasks that are available.
-# Available tasks as of this writing include: Desktop environment,
-# Web server, Print server, DNS server, File server, Mail server,
-# SQL database, Laptop, Standard system, manual package selection. The
-# last of those will run aptitude. You can also choose to install no
-# tasks, and force the installation of a set of packages in some other
-# way. We recommend always including the Standard system task.
-tasksel tasksel/first multiselect Desktop environment, Standard system
-#tasksel tasksel/first multiselect Web server, Standard system
-
-#### Mailer configuration.
-
-# During a normal install, exim asks only a few questions. Here's how to
-# avoid even those. More complicated preseeding is possible.
-exim4-config exim4/dc_eximconfig_configtype \
-    select no configuration at this time
-exim4-config exim4/no_config boolean true
-exim4-config exim4/no_config boolean true
-
-# It's a good idea to set this to whatever user account you choose to
-# create. Leaving the value blank results in postmaster mail going to
-# /var/mail/mail.
-exim4-config exim4/dc_postmaster string
-
-#### X Configuration.
-
-# Preseeding Debian's X config is possible, but you probably need to know
-# some details about the video hardware of the machine, since Debian's X
-# configurator does not do fully automatic configuration of everything.
-
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xfree86 xserver-xfree86/config/device/driver select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xfree86 xserver-xfree86/autodetect_mouse boolean true
-
-# Monitor autodetection is recommended.
-xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true
-# Uncomment if you have an LCD display.
-#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xfree86 xserver-xfree86/config/monitor/selection-method \
-    select medium
-xserver-xfree86 xserver-xfree86/config/monitor/mode-list \
-    select 1024x768 @ 60 Hz
-
-#### Everything else.
-
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-#   debconf-get-selections --installer > file
-#   debconf-get-selections >> file
-
-# If you like, you can include other preseed files into this one.
-# Any settings in those files will override pre-existing settings from this
-# file. More that one file can be listed, separated by spaces; all will be
-# loaded. The included files can have preseed/include directives of their
-# own as well. Note that if the filenames are relative, they are taken from
-# the same directory as the preseed file that includes them.
-#d-i preseed/include string x.cfg
-
-# More flexibly, this runs a shell command and if it outputs the names of
-# preseed files, includes those files. For example, to switch configs based
-# on a particular usb storage device (in this case, a built-in card reader):
-#d-i preseed/include_command string \
-#    if $(grep -q "GUID: 0aec3050aec305000001a003" /proc/scsi/usb-storage-*/*); \
-#    then echo kraken.cfg; else echo otherusb.cfg; fi
-
-# To check the format of your preseed file before performing an install,
-# you can use debconf-set-selections:
-#   debconf-set-selections -c preseed.cfg
-</screen></informalexample>
diff --git a/fi/appendix/example-preseed.xml b/fi/appendix/example-preseed.xml
deleted file mode 100644
index ac2c95bf3..000000000
--- a/fi/appendix/example-preseed.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 32424 untranslated -->
-
-<sect1 id="example-preseed" condition="sarge">
-<title>Preconfiguration File Example</title>
-
-<para>
-
-This is a complete working example of a preconfiguration file for an automated
-install. Its use is explained in <xref linkend="automatic-install"/>. You
-may want to uncomment some of the lines before using the file.
-
-</para>
-
-<note><para>
-
-In order to be able to properly present this example in the manual, we've had
-to split some lines. This is indicated by the use of the line-continuation-character
-<quote>\</quote> and extra indentation in the next line. In a real preconfiguration
-file, these split lines have to be joined into <emphasis>one single line</emphasis>.
-If you do not, preconfiguration will fail with unpredictable results.
-
-</para><para>
-
-A <quote>clean</quote> example file is available from &urlset-example-preseed;.
-
-</para></note>
-
-<para>
-
-&example-preseed-sarge.xml;
-
-</para>
-</sect1>
diff --git a/fi/boot-new/modules/apt.xml b/fi/boot-new/modules/apt.xml
deleted file mode 100644
index 784af9338..000000000
--- a/fi/boot-new/modules/apt.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 23845 untranslated -->
-
- <sect2 id="configure-apt">
- <title>Configuring APT</title>
-
-<para>
-
-The main means that people use to install packages on their system is
-via a program called <command>apt-get</command>, from the
-<classname>apt</classname> package.<footnote>
-
-<para>
-
-Note that the actual program that installs packages is called
-<command>dpkg</command>.  However, this package is more of a low-level
-tool.  <command>apt-get</command> is a higher-level tool as it will
-invoke <command>dpkg</command> as appropriate and also because it knows
-to install other packages which are required for the package you're
-trying to install, as well as how to retrieve the package from your
-CD, the network, or wherever.
-
-</para>
-</footnote>
-Other front-ends for package management, like <command>aptitude</command>,
-<command>synaptic</command> and the older <command>dselect</command> also
-use and depend on <command>apt-get</command>. These front-ends are recommended
-for new users, since they integrate some additional features (package
-searching and status checks) in a nice user interface.
-
-</para><para>
-
-APT must be configured so that it knows where to retrieve packages from.
-The helper application which assists in this task is called
-<command>apt-setup</command>.
-
-</para><para>
-
-The next step in your configuration process is to tell APT where other
-Debian packages can be found.  Note that you can re-run this tool at
-any point after installation by running <command>apt-setup</command>,
-or by manually editing <filename>/etc/apt/sources.list</filename>.
-
-</para><para>
-
-If an official CD-ROM is in the drive at this point, then that CD-ROM
-should automatically be configured as an apt source without prompting.
-You will notice this because you will see the CD-ROM being scanned.
-
-</para><para>
-
-For users without an official CD-ROM, you will be offered an array of
-choices for how Debian packages are accessed: FTP, HTTP, CD-ROM, or
-a local file system.
-
-</para><para>
-
-You should know that it's perfectly acceptable to have a number of
-different APT sources, even for the same Debian archive.
-<command>apt-get</command> will automatically pick the package with
-the highest version number given all the available versions.  Or, for
-instance, if you have both an HTTP and a CD-ROM APT source,
-<command>apt-get</command> should automatically use the local CD-ROM
-when possible, and only resort to HTTP if a newer version is available
-there.  However, it is not a good idea to add unnecessary APT sources,
-since this will tend to slow down the process of checking the network
-archives for new versions.
-
-</para>
-
-  <sect3 id="configure-apt-net">
-  <title>Configuring Network Package Sources</title>
-
-<para>
-
-If you plan on installing the rest of your system via the network, the
-most common option is to select the <userinput>http</userinput>
-source.  The <userinput>ftp</userinput> source is also acceptable, but
-tends to be somewhat slower making connections.
-
-</para><para>
-
-The next step during the configuration of network package sources is
-to tell <command>apt-setup</command> which country you live in.  This
-configures which of the official Debian Internet mirrors you will
-connect to.  Depending on which country you select, you will be presented
-with a list of possible servers.  It's generally fine to pick the one at
-the top of the list, but any of them should work. Note however that the
-mirror list provided by the installation was generated when this version
-of Debian was released and some mirrors may no longer be available.
-
-</para><para>
-
-After you have selected a mirror, you will be asked if a proxy server
-should be used. A proxy server is a server that will forward all your
-HTTP and/or FTP requests to the Internet and is most often used to regulate
-and optimize access to the Internet on corporate networks. In some networks
-only the proxy server is allowed access to the Internet, in which case you
-will have to enter the name of the proxy server. You may also have to
-include an user name and password. Most home users will not need to specify
-a proxy server, although some ISPs may provide proxy servers for their
-users.
-
-</para><para>
-
-After you select a mirror, your new network package source will be tested.
-If all goes well, you will be prompted whether you want to add another
-package source. If you have any problems using the package source you selected,
-try using a different mirror (either from your country list or from the
-global list), or try using a different network package source.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/fi/boot-new/modules/install.xml b/fi/boot-new/modules/install.xml
deleted file mode 100644
index 566ad8e4d..000000000
--- a/fi/boot-new/modules/install.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 28997 untranslated -->
-
- <sect2 id="debconf">
- <title>Prompts During Software Installation</title>
-
-<para>
-
-Each package you selected with <command>tasksel</command> or
-<command>aptitude</command> is
-downloaded, unpacked and then installed in turn by the
-<command>apt-get</command> and <command>dpkg</command> programs. If
-a particular program needs more information from the user, it will
-prompt you during this process. You might also want to keep an eye on
-the output during the process, to watch for any installation errors
-(although you will be asked to acknowledge errors which prevented
-a package's installation).
-
-</para>
-
-  <sect3 arch="powerpc" id="xserver">
-  <title>Settings for the X Server</title>
-
-<para>
-
-On iMacs, and some older Macintoshes as well, the X Server software
-doesn't calculate appropriate video settings. You will need to choose
-the <guimenuitem>Advanced</guimenuitem> option during configuration of the
-video settings. For the monitor's horizontal sync range, enter 59&ndash;63.
-You can leave the default for vertical refresh range.
-
-</para><para>
-
-The mouse device should be set to
-<userinput>/dev/input/mice</userinput>.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/fi/boot-new/modules/mta.xml b/fi/boot-new/modules/mta.xml
deleted file mode 100644
index b5c369817..000000000
--- a/fi/boot-new/modules/mta.xml
+++ /dev/null
@@ -1,93 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22935 untranslated -->
-
- <sect2 id="base-config-mta">
- <title>Configuring Your Mail Transport Agent</title>
-
-<para>
-
-Today, email is a very important part of many people's life, so it's
-no surprise Debian lets you configure your mail system right as a part
-of the installation process. The standard mail transport agent in
-Debian is <command>exim4</command>, which is relatively small,
-flexible, and easy to learn.
-
-</para><para>
-
-You may ask if this is needed even if your computer is not connected
-to any network. The short answer is: Yes. The longer explanation: Some
-system utilities (like <command>cron</command>,
-<command>quota</command>, <command>aide</command>, &hellip;) may send
-you important notices via email.
-
-</para><para>
-
-So on the first screen you will be presented with several common mail
-scenarios. Choose the one that most closely resembles your needs:
-
-</para>
-
-<variablelist>
-<varlistentry>
-<term>internet site</term>
-<listitem><para>
-
-Your system is connected to a network and your mail is sent and
-received directly using SMTP. On the following screens you will be
-asked a few basic questions, like your machine's mail name, or a list of
-domains for which you accept or relay mail.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>mail sent by smarthost</term>
-<listitem><para>
-
-In this scenario is your outgoing mail forwarded to another machine,
-called a <quote>smarthost</quote>, which does the actual job for
-you. Smarthost also usually stores incoming mail addressed to your
-computer, so you don't need to be permanently online. That also means
-you have to download your mail from the smarthost via programs like
-fetchmail. This option is suitable for dial-up users.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>local delivery only</term>
-<listitem><para>
-
-Your system is not on a network and mail is sent or received only
-between local users. Even if you don't plan to send any messages, this
-option is highly recommended, because some system utilities may send
-you various alerts from time to time (e.g. beloved <quote>Disk quota
-exceeded</quote>). This option is also convenient for new users,
-because it doesn't ask any further questions.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>no configuration at this time</term>
-<listitem><para>
-
-Choose this if you are absolutely convinced you know what you are
-doing. This will leave you with an unconfigured mail system &mdash;
-until you configure it, you won't be able to send or receive any mail
-and you may miss some important messages from your system utilities.
-
-</para></listitem>
-</varlistentry>
-</variablelist>
-
-<para>
-
-If none of these scenarios suits your needs, or if you need a finer
-setup, you will need to edit configuration files under the
-<filename>/etc/exim4</filename> directory after the installation is
-complete. More information about <command>exim4</command> may be found
-under <filename>/usr/share/doc/exim4</filename>.
-
-</para>
- </sect2>
diff --git a/fi/boot-new/modules/packages.xml b/fi/boot-new/modules/packages.xml
deleted file mode 100644
index 711027086..000000000
--- a/fi/boot-new/modules/packages.xml
+++ /dev/null
@@ -1,162 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 28672 untranslated -->
-
- <sect2 id="install-packages">
- <title>Package Installation</title>
-
-<para>
-
-Next you will be offered a number of pre-rolled software
-configurations offered by Debian. You could always choose, package by
-package, what you want to install on your new machine.  This is the
-purpose of the <command>aptitude</command> program, described below.
-But this can be a long task with around &num-of-distrib-pkgs; packages
-available in Debian!
-
-</para><para>
-
-So, you have the ability to choose <emphasis>tasks</emphasis> first,
-and then add on more individual packages later.  These tasks loosely
-represent a number of different jobs or things you want to do with
-your computer, such as <quote>desktop environment</quote>,
-<quote>web server</quote>, or <quote>print server</quote><footnote>
-
-<para>
-
-You should know that to present this list,
-<command>base-config</command> is merely invoking the
-<command>tasksel</command> program.  For manual package
-selection, the
-<command>aptitude</command> program is being run.  Any of these can be
-run at any time after installation to install (or remove) more
-packages.  If you are looking for a specific single package, after
-installation is complete, simply run <userinput>aptitude install
-<replaceable>package</replaceable></userinput>, where
-<replaceable>package</replaceable> is the name of the package you are
-looking for.
-
-</para>
-
-</footnote>. <xref linkend="tasksel-size-list"/> lists the space
-requirements for the available tasks.
-
-</para><para>
-
-Once you've selected your tasks, select
-<guibutton>Ok</guibutton>. At this point,
-<command>aptitude</command> will install the packages you've
-selected.
-
-<note><para>
-
-Even if you did not select any tasks at all, any standard,
-important, or required priority packages that are not yet present on
-your system will be installed.  This functionality is the same as
-running <userinput>tasksel -ris</userinput> at the command line, and
-currently involves
-a download of about 37M of archives. You will be shown the number of
-packages to be installed, and how many kilobytes of packages, if any,
-need to be downloaded.
-
-</para></note>
-
-</para><para>
-
-If you do want to choose what to install on a package by package basis,
-select the <quote>manual package selection</quote> option in
-<command>tasksel</command>. If you select one or more tasks alongside
-this option, <command>aptitude</command> will be called with the
-<command>--visual-preview</command> option. This means you will be able to review<footnote>
-
-<para>
-
-You can also change the default selections. If you would like to select any
-additional package, use <menuchoice> <guimenu>View</guimenu>
-<guimenuitem>New Package View</guimenuitem> </menuchoice>.
-
-</para>
-
-</footnote> the packages that are to be installed. If you do not select any
-tasks, the normal <command>aptitude</command> screen will be displayed. After
-making your selections you should press <quote><userinput>g</userinput></quote>
-to start the download and installation of packages.
-
-<note><para>
-
-If you choose <quote>manual package selection</quote>
-<emphasis>without</emphasis> selecting any tasks, no packages will be installed
-by default. This means you can use this option if you want to install a minimal
-system, but also that the responsibility for selecting any packages not
-installed as part of the base system (before the reboot) that might be required
-for your system lies with you.
-
-</para></note>
-
-</para><para>
-
-Of the &num-of-distrib-pkgs; packages available in Debian, only
-a small minority are covered by tasks offered in the Task Installer.
-To see information on more packages, either use <userinput>apt-cache
-search <replaceable>search-string</replaceable></userinput> for some
-given search string (see the <citerefentry>
-<refentrytitle>apt-cache</refentrytitle> <manvolnum>8</manvolnum>
-</citerefentry> man page), or run
-<command>aptitude</command> as described below.
-
-</para>
-
- <sect3 id="aptitude">
- <title>Advanced Package Selection with <command>aptitude</command></title>
-
-<para>
-
-<command>Aptitude</command> is a modern program for managing
-packages. <command>aptitude</command> allows you to
-select individual packages, set of packages matching given criteria
-(for advanced users), or whole tasks.
-
-</para><para>
-
-The most basic keybindings are:
-
-<informaltable>
-<tgroup cols="2">
-<thead>
-<row>
-  <entry>Key</entry><entry>Action</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry><keycap>Up</keycap>, <keycap>Down</keycap></entry>
-  <entry>Move selection up or down.</entry>
-</row><row>
-  <entry>&enterkey;</entry>
-  <entry>Open/collapse/activate item.</entry>
-</row><row>
-  <entry><keycap>+</keycap></entry>
-  <entry>Mark package for installation.</entry>
-</row><row>
-  <entry><keycap>-</keycap></entry>
-  <entry>Mark package for removal.</entry>
-</row><row>
-  <entry><keycap>d</keycap></entry>
-  <entry>Show package dependencies.</entry>
-</row><row>
-  <entry><keycap>g</keycap></entry>
-  <entry>Actually download/install/remove packages.</entry>
-</row><row>
-  <entry><keycap>q</keycap></entry>
-  <entry>Quit current view.</entry>
-</row><row>
-  <entry><keycap>F10</keycap></entry>
-  <entry>Activate menu.</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-For more commands see the online help under the <keycap>?</keycap> key.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/fi/boot-new/modules/ppp.xml b/fi/boot-new/modules/ppp.xml
deleted file mode 100644
index e29bd0cad..000000000
--- a/fi/boot-new/modules/ppp.xml
+++ /dev/null
@@ -1,142 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 23660 untranslated -->
-
- <sect2 arch="not-s390" id="PPP">
- <title>Setting Up PPP</title>
-
-<para>
-
-If no network was configured during the first stage of the installation,
-you will next be asked whether you wish to install the rest of the system
-using PPP. PPP is a protocol used to establish dialup connections with modems.
-If you configure the modem at this point, the installation system will be able
-to download additional packages or security updates from the Internet during
-the next steps of the installation.
-If you don't have a modem in your computer or if you prefer to configure
-your modem after the installation, you can skip this step.
-
-</para><para>
-
-In order to configure your PPP connection, you will need some information
-from your  Internet Service Provider (ISP), including phone number, username,
-password and DNS servers (optional). Some ISPs provide installation guidelines
-for Linux distributions. You can use that information even if they don't
-specifically target Debian since most of the configuration parameters
-(and software) is similar amongst Linux distributions.
-
-</para><para>
-
-If you do choose to configure PPP at this point, a program named
-<command>pppconfig</command> will be run.  This program helps you
-configure your PPP connection.  <emphasis>Make sure, when it asks you
-for the name of your dialup connection, that you name it
-<userinput>provider</userinput>.</emphasis>
-
-</para><para>
-
-Hopefully, the <command>pppconfig</command> program will walk you
-through a trouble-free PPP connection setup.  However, if it does not
-work for you, see below for detailed instructions.
-
-</para><para>
-
-In order to setup PPP, you'll need to know the basics of file viewing
-and editing in GNU/Linux.  To view files, you should use
-<command>more</command>, and <command>zmore</command> for compressed
-files with a <userinput>.gz</userinput> extension.  For example, to
-view <filename>README.debian.gz</filename>, type <userinput>zmore
-README.debian.gz</userinput>.  The base system comes with an editor
-named <command>nano</command>, which is very simple to use, but does
-not have a lot of features. You will probably want to install more
-full-featured editors and viewers later, such as
-<command>jed</command>, <command>nvi</command>,
-<command>less</command>, and <command>emacs</command>.
-
-</para><para>
-
-Edit <filename>/etc/ppp/peers/provider</filename> and replace
-<userinput>/dev/modem</userinput> with
-<userinput>/dev/ttyS<replaceable>&num;</replaceable></userinput> where
-<replaceable>&num;</replaceable> stands for the number of your serial
-port. In Linux, serial ports are counted from 0; your first serial
-port <phrase arch="i386">(i.e., <userinput>COM1</userinput>)</phrase>
-is <filename>/dev/ttyS0</filename> under Linux.
-
-<phrase arch="powerpc;m68k">On Macintoshes with serial ports, the
-modem port is <filename>/dev/ttyS0</filename> and the printer port is
-<filename>/dev/ttyS1</filename>.</phrase>
-
-The next step is to edit
-<filename>/etc/chatscripts/provider</filename> and insert your
-provider's phone number, your user-name and password. Please do not
-delete the <quote>\q</quote> that precedes the password. It hides the
-password from appearing in your log files.
-
-</para><para>
-
-Many providers use PAP or CHAP for login sequence instead of text mode
-authentication.  Others use both.  If your provider requires PAP or
-CHAP, you'll need to follow a different procedure.  Comment out
-everything below the dialing string (the one that starts with
-<quote>ATDT</quote>) in
-<filename>/etc/chatscripts/provider</filename>, modify
-<filename>/etc/ppp/peers/provider</filename> as described above, and
-add <userinput>user <replaceable>name</replaceable></userinput> where
-<replaceable>name</replaceable> stands for your user-name for the
-provider you are trying to connect to.  Next, edit
-<filename>/etc/ppp/pap-secrets</filename> or
-<filename>/etc/ppp/chap-secrets</filename> and enter your password
-there.
-
-</para><para>
-
-You will also need to edit <filename>/etc/resolv.conf</filename> and
-add your provider's name server (DNS) IP addresses.  The lines in
-<filename>/etc/resolv.conf</filename> are in the following format:
-<userinput>nameserver
-<replaceable>xxx.xxx.xxx.xxx</replaceable></userinput> where the
-<replaceable>x</replaceable>s stand for numbers in your IP
-address. Optionally, you could add the
-<userinput>usepeerdns</userinput> option to the
-<filename>/etc/ppp/peers/provider</filename> file, which will enable
-automatic choosing of appropriate DNS servers, using settings the
-remote host usually provides.
-
-</para><para>
-
-Unless your provider has a login sequence different from the majority
-of ISPs, you are done! Start the PPP connection by typing
-<command>pon</command> as root, and monitor the process using
-<command>plog</command> command. To disconnect, use
-<command>poff</command>, again, as root.
-
-</para><para>
-
-Read <filename>/usr/share/doc/ppp/README.Debian.gz</filename> file for
-more information on using PPP on Debian.
-
-</para><para>
-
-For static SLIP connections, you will need to add the
-<userinput>slattach</userinput> command (from the
-<classname>net-tools</classname> package) into
-<filename>/etc/init.d/network</filename>. Dynamic SLIP will require
-the <classname>gnudip</classname> package.
-
-</para>
-
-  <sect3 id="PPPOE">
-  <title>Setting Up PPP over Ethernet (PPPOE)</title>
-
-<para>
-
-PPPOE is a protocol related to PPP used for some broadband connections.
-There is currently no support in base configuration to help you set
-this up. However, the necessary software has been installed, which means
-you can configure PPPOE manually at this stage of the installation by
-switching to VT2 and running <command>pppoeconf</command>.
-
-</para>
-
-  </sect3>
- </sect2>
diff --git a/fi/boot-new/modules/shadow.xml b/fi/boot-new/modules/shadow.xml
deleted file mode 100644
index e4ac0ce1e..000000000
--- a/fi/boot-new/modules/shadow.xml
+++ /dev/null
@@ -1,69 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 18642 untranslated -->
-
- <sect2 id="base-config-users">
- <title>Setting Up Users And Passwords</title>
-
-  <sect3 id="base-config-root">
-  <title>Set the Root Password</title>
-
-<para>
-
-The <emphasis>root</emphasis> account is also called the
-<emphasis>super-user</emphasis>; it is a login that bypasses all
-security protection on your system. The root account should only be
-used to perform system administration, and only used for as short
-a time as possible.
-
-</para><para>
-
-Any password you create should contain at least 6 characters, and
-should contain both upper- and lower-case characters, as well as
-punctuation characters.  Take extra care when setting your root
-password, since it is such a powerful account.  Avoid dictionary
-words or use of any personal information which could be guessed.
-
-</para><para>
-
-If anyone ever tells you they need your root password, be extremely
-wary. You should normally never give your root password out, unless you
-are administering a machine with more than one system administrator.
-
-</para>
-  </sect3>
-
-  <sect3 id="make-normal-user">
-  <title>Create an Ordinary User</title>
-
-<para>
-
-The system will ask you whether you wish to create an ordinary user
-account at this point.  This account should be your main personal
-log-in.  You should <emphasis>not</emphasis> use the root account for
-daily use or as your personal login.
-
-</para><para>
-
-Why not?  Well, one reason to avoid using root's privileges is that it
-is very easy to do irreparable damage as root.  Another reason is that
-you might be tricked into running a <emphasis>Trojan-horse</emphasis>
-program &mdash; that is a program that takes advantage of your
-super-user powers to compromise the security of your system behind
-your back. Any good book on Unix system administration will cover this
-topic in more detail &mdash; consider reading one if it is new to you.
-
-</para><para>
-
-You will first be prompted for the user's full name. Then you'll be asked
-for a name for the user account; generally your first name or something
-similar will suffice and indeed will be the default. Finally, you will be
-prompted for a password for this account.
-
-</para><para>
-
-If at any point after installation you would like to create another
-account, use the <command>adduser</command> command.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/fi/boot-new/modules/timezone.xml b/fi/boot-new/modules/timezone.xml
deleted file mode 100644
index e7edc7917..000000000
--- a/fi/boot-new/modules/timezone.xml
+++ /dev/null
@@ -1,30 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 19108 untranslated -->
-
- <sect2 id="base-config-tz">
- <title>Configuring Your Time Zone</title>
-
-<para>
-
-After a welcome screen, you will be prompted to configure your time zone.
-First select whether the hardware clock of your system is set to local
-time or Greenwich Mean Time (GMT or UTC). The time displayed in the dialog
-may help you decide on the correct option.
-<phrase arch="m68k;powerpc">Macintosh hardware clocks are normally
-set to local time. If you want to dual-boot, select local time instead of
-GMT.</phrase>
-<phrase arch="i386">Systems that (also) run Dos or Windows are normally
-set to local time. If you want to dual-boot, select local time instead of
-GMT.</phrase>
-
-</para><para>
-
-Depending on the location selected at the beginning of the installation
-process, you will next be shown either a single timezone or a list of
-timezones relevant for that location. If a single timezone is shown, choose
-<guibutton>Yes</guibutton> to confirm or choose <guibutton>No</guibutton>
-to select from the full list of timezones. If a list is shown, select your
-timezone from the list, or select Other for the full list.
-
-</para>
- </sect2>