- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

1 files changed, 0 insertions, 199 deletions

diff --git a/fi/using-d-i/modules/partman.xml b/fi/using-d-i/modules/partman.xml
deleted file mode 100644
index 78fe131bb..000000000
--- a/fi/using-d-i/modules/partman.xml
+++ /dev/null
@@ -1,199 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 30158 untranslated -->
-
-   <sect3 id="partman">
-   <title>Partitioning Your Disks</title>
-
-<para>
-
-Now it is time to partition your disks. If you are uncomfortable with
-partitioning, or just want to know more details, see <xref
-linkend="partitioning"/>.
-
-</para><para>
-
-First you will be given the opportunity to automatically partition
-either an entire drive, or free space on a drive. This is also called
-<quote>guided</quote> partitioning. If you do not want to
-autopartition, choose <guimenuitem>Manually edit partition
-table</guimenuitem> from the menu.
-
-</para><para>
-
-If you choose guided partitioning, you will be able to choose from the
-schemes listed in the table below. All schemes have their pros and cons,
-some of which are discussed in <xref linkend="partitioning"/>. If you are
-unsure, choose the first one. Bear in mind, that guided partitioning
-needs certain minimal amount of free space to operate with. If you don't
-give it at least about 1GB of space (depends on chosen scheme), guided
-partitioning will fail.
-
-</para>
-
-<informaltable>
-<tgroup cols="3">
-<thead>
-<row>
-  <entry>Partitioning scheme</entry>
-  <entry>Minimum space</entry>
-  <entry>Created partitions</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry>All files in one partition</entry>
-  <entry>600MB</entry>
-  <entry><filename>/</filename>, swap</entry>
-</row><row>
-  <entry>Desktop machine</entry>
-  <entry>500MB</entry>
-  <entry>
-    <filename>/</filename>, <filename>/home</filename>, swap
-  </entry>
-</row><row>
-  <entry>Multi-user workstation</entry>
-  <entry>1GB</entry>
-  <entry>
-    <filename>/</filename>, <filename>/home</filename>,
-    <filename>/usr</filename>, <filename>/var</filename>,
-    <filename>/tmp</filename>, swap
-  </entry>
-</row>
-
-</tbody></tgroup></informaltable>
-
-<para arch="ia64">
-
-If you chose an automatic partitioning for your IA64 system, there
-will be an additional partition, formatted as a FAT16 bootable filesystem,
-for the EFI boot loader.
-There is also an additional menu item in the formatting menu to manually
-set up a partition as an EFI boot partition.
-
-</para><para arch="alpha">
-
-If you chose an automatic partitioning for your Alpha system, an
-additional, unformatted partition will be allocated at the beginning of
-your disk to reserve this space for the aboot boot loader.
-
-</para><para>
-
-After selecting a scheme, the next screen will show your new partition
-table, including information on whether and how partitions will be
-formatted and where they will be mounted.
-
-</para><para>
-
-The list of partitions might look like this:
-
-<!-- TODO: show some flags here (lightning, skull, smiley) -->
-<informalexample><screen>
-  IDE1 master (hda) - 6.4 GB WDC AC36400L
-        #1 primary   16.4 MB     ext2       /boot
-        #2 primary  551.0 MB     swap       swap
-        #3 primary    5.8 GB     ntfs
-           pri/log    8.2 MB     FREE SPACE
-
-  IDE1 slave (hdb) - 80.0 GB ST380021A
-        #1 primary   15.9 MB     ext3
-        #2 primary  996.0 MB     fat16
-        #3 primary    3.9 GB     xfs        /home
-        #5 logical    6.0 GB     ext3       /
-        #6 logical    1.0 GB     ext3       /var
-        #7 logical  498.8 MB     ext3
-        #8 logical  551.5 MB     swap       swap
-        #9 logical   65.8 GB     ext2
-</screen></informalexample>
-
-This example shows two IDE harddrives divided into several partitions;
-the first disk has some free space. Each partition line consists of the
-partition number, its type, size, optional flags, file system, and
-mountpoint (if any).
-
-</para><para>
-
-This concludes the guided partitioning. If you are satisfied with the
-generated partition table, you can choose <guimenuitem>Finish
-partitioning and write changes to disk</guimenuitem> from the menu to
-implement the new partition table (as described at the end of this
-section). If you are not happy, you can choose to <guimenuitem>Undo
-changes to partitions</guimenuitem>, to run guided partitioning again
-or modify the proposed changes as described below for manual partitioning.
-
-</para><para>
-
-A similar screen to the one shown just above will be displayed if you
-choose manual partitioning except that your existing partition table will
-be shown and without the mount points. How to manually setup your partition
-table and the usage of partitions by your new Debian system will be covered
-in the remainder of this section.
-
-</para><para>
-
-If you select a pristine disk which doesn't have neither partitions
-nor free space on it, you will be offered to create a new partition
-table (this is needed so you can create new partitions). After this
-a new line entitled <quote>FREE SPACE</quote> should appear under the
-selected disk.
-
-</para><para>
-
-If you select some free space, you will be offered to create new
-partition. You will have to answer a quick series of questions about
-its size, type (primary or logical), and location (beginning or end of
-the free space). After this, you will be presented with detailed
-overview of your new partition. There are options like mountpoint,
-mount options, bootable flag, or way of usage. If you don't like the
-preselected defaults, feel free to change them to your liking. E.g. by
-selecting the option <guimenuitem>Use as:</guimenuitem>, you can
-choose different filesystem for this partition including the
-possibility to use the partition for swap, software RAID, LVM, or not
-use it at all. Other nice feature is the possibility to copy data from
-existing partition onto this one.
-When you are satisfied with your new partition, select
-<guimenuitem>Done setting up the partition</guimenuitem> and you will be
-thrown back to the <command>partman</command>'s main screen.
-
-</para><para>
-
-If you decide you want to change something about your partition,
-simply select the partition, which will bring you to the partition
-configuration menu. Because this is the same screen like when creating
-a new partition, you can change the same set of options. One thing
-which might not be very obvious at a first glance is that you can
-resize the partition by selecting the item displaying the size of the
-partition. Filesystems known to work are at least fat16, fat32, ext2,
-ext3 and swap. This menu also allows you to delete a partition.
-
-</para><para>
-
-Be sure to create at least two partitions: one for the
-<emphasis>root</emphasis> filesystem (which must be mounted as
-<filename>/</filename>) and one for <emphasis>swap</emphasis>. If you
-forget to mount the root filesystem, <command>partman</command> won't
-let you continue until you correct this issue.
-
-</para><para arch="ia64">
-
-If you forget to select and format an EFI boot partition
-<command>partman</command> will detect this and will not let you continue
-until you allocate one.
-
-</para><para>
-
-Capabilities of <command>partman</command> can be extended with installer
-modules, but are dependent on your system's architecture. So if you can't
-see all promised goodies, check if you have loaded all required modules
-(e.g. <filename>partman-ext3</filename>, <filename>partman-xfs</filename>,
-or <filename>partman-lvm</filename>).
-
-</para><para>
-
-After you are satisfied with partitioning, select <guimenuitem>Finish
-partitioning and write changes to disk</guimenuitem> from the partitioning
-menu. You will be presented with a summary of changes made to the disks
-and asked to confirm that the filesystems should be created as requested.
-
-</para>
-   </sect3>