- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

2 files changed, 0 insertions, 207 deletions

diff --git a/fi/install-methods/usb-setup/i386.xml b/fi/install-methods/usb-setup/i386.xml
deleted file mode 100644
index 220f69dae..000000000
--- a/fi/install-methods/usb-setup/i386.xml
+++ /dev/null
@@ -1,97 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 33725 untranslated -->
-
-   <sect3 arch="i386">
-   <title>USB stick partitioning on &arch-title;</title>
-<para>
-
-We will show how to setup the memory stick to use the first partition,
-instead of the entire device.
-
-</para><note><para>
-
-Since most USB sticks come pre-configured with a single FAT16
-partition, you probably won't have to repartition or reformat the
-stick.  If you have to do that anyway, use <command>cfdisk</command>
-or any other partitioning tool for creating a FAT16 partition and then
-create the filesystem using:
-
-<informalexample><screen>
-# mkdosfs /dev/<replaceable>sda1</replaceable>
-</screen></informalexample>
-
-Take care that you use the correct device name for your USB stick. The
-<command>mkdosfs</command> command is contained in the
-<classname>dosfstools</classname> Debian package.
-
-</para></note><para>
-
-In order to start the kernel after booting from the USB stick, we will
-put a boot loader on the stick. Although any boot loader
-(e.g. <command>LILO</command>) should work, it's convenient to use
-<command>SYSLINUX</command>, since it uses a FAT16 partition and can
-be reconfigured by just editing a text file. Any operating system
-which supports the FAT file system can be used to make changes to the
-configuration of the boot loader.
-
-</para><para>
-
-To put <command>SYSLINUX</command> on the FAT16 partition on your USB
-stick, install the <classname>syslinux</classname> and
-<classname>mtools</classname> packages on your system, and do:
-
-<informalexample><screen>
-# syslinux /dev/<replaceable>sda1</replaceable>
-</screen></informalexample>
-
-Again, take care that you use the correct device name. The partition
-must not be mounted when starting <command>SYSLINUX</command>. This
-procedure writes a boot sector to the partition and creates the file
-<filename>ldlinux.sys</filename> which contains the boot loader code.
-
-</para><para>
-
-Mount the partition (<userinput>mount /dev/sda1 /mnt</userinput>) and
-copy the following files from the Debian archives to the stick:
-
-<itemizedlist>
-<listitem><para>
-
-<filename>vmlinuz</filename> (kernel binary)
-
-</para></listitem>
-<listitem><para>
-
-<filename>initrd.gz</filename> (initial ramdisk image)
-
-</para></listitem>
-<listitem><para>
-
-<filename>syslinux.cfg</filename> (SYSLINUX configuration file)
-
-</para></listitem>
-<listitem><para>
-
-Optional kernel modules
-
-</para></listitem>
-</itemizedlist>
-
-If you want to rename the files, please note that
-<command>SYSLINUX</command> can only process DOS (8.3) file names.
-
-</para><para>
-
-The <filename>syslinux.cfg</filename> configuration file should
-contain the following two lines:
-
-<informalexample><screen>
-default vmlinuz
-append initrd=initrd.gz ramdisk_size=12000 root=/dev/ram rw
-</screen></informalexample>
-
-Please note that the <userinput>ramdisk_size</userinput> parameter
-may need to be increased, depending on the image you are booting.
-
-</para>
-   </sect3>
diff --git a/fi/install-methods/usb-setup/powerpc.xml b/fi/install-methods/usb-setup/powerpc.xml
deleted file mode 100644
index fc64d7eb6..000000000
--- a/fi/install-methods/usb-setup/powerpc.xml
+++ /dev/null
@@ -1,110 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 33725 untranslated -->
-
-   <sect3 arch="powerpc">
-   <title>USB stick partitioning on &arch-title;</title>
-<para>
-
-Most USB sticks do not come pre-configured in such a way that Open
-Firmware can boot from them, so you will need to repartition the stick.
-On Mac systems, run <userinput>mac-fdisk /dev/sda</userinput>,
-initialise a new partition map using the <userinput>i</userinput>
-command, and create a new partition of type Apple_Bootstrap using the
-<userinput>C</userinput> command. (Note that the first "partition" will
-always be the partition map itself.) Then type
-
-<informalexample><screen>
-$ hformat /dev/<replaceable>sda2</replaceable>
-</screen></informalexample>
-
-Take care that you use the correct device name for your USB stick. The
-<command>hformat</command> command is contained in the
-<classname>hfsutils</classname> Debian package.
-
-</para><para>
-
-In order to start the kernel after booting from the USB stick, we will
-put a boot loader on the stick. The <command>yaboot</command> boot
-loader can be installed on an HFS filesystem and can be reconfigured by
-just editing a text file. Any operating system which supports the HFS
-file system can be used to make changes to the configuration of the boot
-loader.
-
-</para><para>
-
-The normal <command>ybin</command> tool that comes with
-<command>yaboot</command> does not yet understand USB storage devices,
-so you will have to install <command>yaboot</command> by hand using the
-<classname>hfsutils</classname> tools. Type
-
-<informalexample><screen>
-$ hmount /dev/sda2
-$ hcopy -r /usr/lib/yaboot/yaboot :
-$ hattrib -c UNIX -t tbxi :yaboot
-$ hattrib -b :
-$ humount
-</screen></informalexample>
-
-Again, take care that you use the correct device name. The partition
-must not be otherwise mounted during this procedure. This procedure
-writes the boot loader to the partition, and uses the HFS utilities to
-mark it in such a way that Open Firmware will boot it. Having done this,
-the rest of the USB stick may be prepared using the normal Unix
-utilities.
-
-</para><para>
-
-Mount the partition (<userinput>mount /dev/sda2 /mnt</userinput>) and
-copy the following files from the Debian archives to the stick:
-
-<itemizedlist>
-<listitem><para>
-
-<filename>vmlinux</filename> (kernel binary)
-
-</para></listitem>
-<listitem><para>
-
-<filename>initrd.gz</filename> (initial ramdisk image)
-
-</para></listitem>
-<listitem><para>
-
-<filename>yaboot.conf</filename> (yaboot configuration file)
-
-</para></listitem>
-<listitem><para>
-
-<filename>boot.msg</filename> (optional boot message)
-
-</para></listitem>
-<listitem><para>
-
-Optional kernel modules
-
-</para></listitem>
-</itemizedlist>
-
-</para><para>
-
-The <filename>yaboot.conf</filename> configuration file should
-contain the following lines:
-
-<informalexample><screen>
-default=install
-root=/dev/ram
-
-message=/boot.msg
-
-image=/vmlinux
-        label=install
-        initrd=/initrd.gz
-        initrd-size=10000
-        read-only
-</screen></informalexample>
-
-Please note that the <userinput>initrd-size</userinput> parameter
-may need to be increased, depending on the image you are booting.
-
-</para>
-   </sect3>