- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

1 files changed, 0 insertions, 214 deletions

diff --git a/fi/hardware/network-cards.xml b/fi/hardware/network-cards.xml
deleted file mode 100644
index deb384f58..000000000
--- a/fi/hardware/network-cards.xml
+++ /dev/null
@@ -1,214 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 36732 untranslated -->
-
- <sect1 id="network-cards">
- <title>Network Connectivity Hardware</title>
-
-<para arch="i386">
-
-<!-- last updated for kernel-image_2.0.36-2 -->
-
-Most PCI and many older ISA network cards are supported.
-Some network interface cards are not supported by most Debian
-installation disks, such as AX.25 cards and protocols;
-NI16510 EtherBlaster cards; Schneider &amp; Koch G16 cards;
-and the Zenith Z-Note built-in network card. Microchannel (MCA) network
-cards are not supported by the standard installation system, but see
-<ulink url="&url-linux-mca;">Linux on MCA</ulink> for some (old)
-instructions.
-FDDI networks are also not supported by the installation disks, both
-cards and protocols.
-
-<!-- missing-doc FIXME You can create a custom kernel which supports an
-otherwise unsupported card and then substitute in the installer (see
-<xref linkend="rescue-replace-kernel"/>). -->
-
-</para><para arch="i386">
-
-As for ISDN, the D-channel protocol for the (old) German 1TR6 is not
-supported; Spellcaster BRI ISDN boards are also not supported by the
-&d-i;.
-
-</para>
-
-<para arch="m68k">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.  Again, see
-<ulink url="&url-m68k-faq;"></ulink> for complete details.
-
-</para>
-
-<para arch="sparc">
-
-The following network interface cards (NICs) are supported from the bootable
-kernel directly:
-
-<itemizedlist>
- <listitem><para>
-
-Sun LANCE
-
-
-</para></listitem>
- <listitem><para>
-
-Sun Happy Meal
-
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="sparc">
-
-The following network interface cards are supported as modules.  They
-can be enabled once the drivers are installed during the setup.
-However, due to the magic of OpenPROM, you still should be able to
-boot from these devices:
-
-<itemizedlist>
- <listitem><para>
-
-Sun BigMAC
-
-
-</para></listitem>
- <listitem><para>
-
-Sun QuadEthernet
-
-</para></listitem>
- <listitem><para>
-
-MyriCOM Gigabit Ethernet
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="alpha">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="powerpc">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="hppa">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="ia64">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="mips">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="mipsel">
-
-Due to kernel limitations only the onboard network interfaces on
-DECstations are supported, TurboChannel option network cards currently
-do not work.
-
-</para><para arch="s390">
-
-Any network interface card (NIC) supported by the Linux kernel is
-also be supported by the boot disks.  All network drivers are compiled
-as modules so you need to load one first during the initial network
-setup. The list of supported network devices is:
-
-<itemizedlist>
- <listitem><para>
-
-Channel to Channel (CTC) and ESCON connection (real or emulated)
-
-</para></listitem>
- <listitem><para>
-
-OSA-2 Token Ring/Ethernet and OSA-Express Fast Ethernet (non-QDIO)
-
-</para></listitem>
-<listitem><para>
-
-Inter-User Communication Vehicle (IUCV) &mdash; available for VM guests only
-
-</para></listitem>
-<listitem><para>
-
-OSA-Express in QDIO mode, HiperSockets and Guest-LANs
-
-</para></listitem>
-</itemizedlist>
-
-</para>
-
-<para arch="arm">
-
-The following network interface cards are supported directly by the
-boot disks on Netwinder and CATS machines:
-
-<itemizedlist>
- <listitem><para>
-
-    PCI-based NE2000
-
-
-</para></listitem>
- <listitem><para>
-
-    DECchip Tulip
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="arm">
-
-The following network interface cards are supported directly by the
-boot disks on RiscPCs:
-
-<itemizedlist>
- <listitem><para>
-
-    Ether1
-
-</para></listitem>
- <listitem><para>
-
-    Ether3
-
-</para></listitem>
- <listitem><para>
-
-    EtherH
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="arm">
-
-If your card is mentioned in the lists above, the complete installation
-can be carried out from the network with no need for CD-ROMs or floppy
-disks.
-
-</para><para arch="arm">
-
-Any other network interface card (NIC) supported by the Linux kernel
-should also be supported by the boot disks.  You may need to load your
-network driver as a module; this means that you will have to install
-the operating system kernel and modules using some other media.
-
-</para>
-
- </sect1>