- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

1 files changed, 0 insertions, 351 deletions

diff --git a/fi/hardware/hardware-supported.xml b/fi/hardware/hardware-supported.xml
deleted file mode 100644
index d05839f16..000000000
--- a/fi/hardware/hardware-supported.xml
+++ /dev/null
@@ -1,351 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 36733 untranslated -->
-
- <sect1 id="hardware-supported">
- <title>Supported Hardware</title>
-
-<para>
-
-Debian does not impose hardware requirements beyond the requirements
-of the Linux kernel and the GNU tool-sets.  Therefore, any
-architecture or platform to which the Linux kernel, libc,
-<command>gcc</command>, etc. have been ported, and for which a Debian
-port exists, can run Debian. Please refer to the Ports pages at
-<ulink url="&url-ports;"></ulink> for
-more details on &arch-title; architecture systems which have been
-tested with Debian.
-
-</para><para>
-
-Rather than attempting to describe all the different hardware
-configurations which are supported for &arch-title;, this section
-contains general information and pointers to where additional
-information can be found.
-
-</para>
-
-  <sect2><title>Supported Architectures</title>
-
-<para>
-
-Debian &release; supports eleven major architectures and several
-variations of each architecture known as <quote>flavors</quote>.
-
-</para><para>
-
-<informaltable>
-<tgroup cols="4">
-<thead>
-<row>
-  <entry>Architecture</entry><entry>Debian Designation</entry>
-  <entry>Subarchitecture</entry><entry>Flavor</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="2">Intel x86-based</entry>
-  <entry morerows="2">i386</entry>
-  <entry morerows="2"></entry>
-  <entry>vanilla</entry>
-</row><row>
-  <entry>speakup</entry>
-</row><row>
-  <entry>linux26</entry>
-</row>
-
-<row>
-  <entry morerows="5">Motorola 680x0</entry>
-  <entry morerows="5">m68k</entry>
-  <entry>Atari</entry>
-  <entry>atari</entry>
-</row><row>
-  <entry>Amiga</entry>
-  <entry>amiga</entry>
-</row><row>
-  <entry>68k Macintosh</entry>
-  <entry>mac</entry>
-</row><row>
-  <entry morerows="2">VME</entry>
-  <entry>bvme6000</entry>
-</row><row>
-  <entry>mvme147</entry>
-</row><row>
-  <entry>mvme16x</entry>
-</row>
-
-<row>
-  <entry>DEC Alpha</entry>
-  <entry>alpha</entry>
-  <entry></entry>
-  <entry></entry>
-</row>
-
-<row>
-  <entry morerows="1">Sun SPARC</entry>
-  <entry morerows="1">sparc</entry>
-  <entry morerows="1"></entry>
-  <entry>sun4cdm</entry>
-</row><row>
-  <entry>sun4u</entry>
-</row>
-
-<row>
-  <entry morerows="2">ARM and StrongARM</entry>
-  <entry morerows="2">arm</entry>
-  <entry>Netwinder and CATS</entry>
-  <entry>netwinder</entry>
-</row><row>
-  <entry>Linksys NSLU2</entry>
-  <entry>nslu2</entry>
-</row><row>
-  <entry>RiscPC and Riscstation</entry>
-  <entry>riscpc</entry>
-</row>
-
-<row>
-  <entry morerows="3">IBM/Motorola PowerPC</entry>
-  <entry morerows="3">powerpc</entry>
-  <entry>CHRP</entry>
-  <entry>chrp</entry>
-</row><row>
-  <entry>PowerMac</entry>
-  <entry>pmac</entry>
-</row><row>
-  <entry>PReP</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>APUS</entry>
-  <entry>apus</entry>
-</row>
-
-<row>
-  <entry morerows="1">HP PA-RISC</entry>
-  <entry morerows="1">hppa</entry>
-  <entry>PA-RISC 1.1</entry>
-  <entry>32</entry>
-</row><row>
-  <entry>PA-RISC 2.0</entry>
-  <entry>64</entry>
-</row>
-
-<row>
-  <entry>Intel ia64-based</entry>
-  <entry>ia64</entry>
-  <entry></entry>
-  <entry></entry>
-</row>
-
-<row>
-  <entry morerows="4">MIPS (big endian)</entry>
-  <entry morerows="4">mips</entry>
-  <entry morerows="1">SGI IP22 (Indy/Indigo 2)</entry>
-  <entry>r4k-ip22</entry>
-</row><row>
-  <entry>r5k-ip22</entry>
-</row><row>
-  <entry>SGI IP32 (O2)</entry>
-  <entry>r5k-ip32</entry>
-</row><row>
-  <entry>Broadcom BCM91250A (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row><row>
-  <entry>Broadcom BCM91480B (BigSur)</entry>
-  <entry>sb1a-bcm91480b</entry>
-</row>
-
-<row>
-  <entry morerows="4">MIPS (little endian)</entry>
-  <entry morerows="4">mipsel</entry>
-  <entry>Cobalt</entry>
-  <entry>cobalt</entry>
-</row><row>
-  <entry morerows="1">DECstation</entry>
-  <entry>r4k-kn04</entry>
-</row><row>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>Broadcom BCM91250A (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row><row>
-  <entry>Broadcom BCM91480B (BigSur)</entry>
-  <entry>sb1a-bcm91480b</entry>
-</row>
-
-<row>
-  <entry morerows="1">IBM S/390</entry>
-  <entry morerows="1">s390</entry>
-  <entry>IPL from VM-reader and DASD</entry>
-  <entry>generic</entry>
-</row><row>
-  <entry>IPL from tape</entry>
-  <entry>tape</entry>
-</row>
-
-</tbody></tgroup></informaltable>
-
-</para><para>
-
-This document covers installation for the
-<emphasis>&arch-title;</emphasis> architecture.  If you are looking
-for information on any of the other Debian-supported architectures
-take a look at the
-<ulink url="http://www.debian.org/ports/">Debian-Ports</ulink> pages.
-
-</para><para condition="new-arch">
-
-This is the first official release of &debian; for the &arch-title;
-architecture.  We feel that it has proven itself sufficiently to be
-released. However, because it has not had the exposure (and hence
-testing by users) that some other architectures have had, you may
-encounter a few bugs. Use our
-<ulink url="&url-bts;">Bug Tracking System</ulink> to report any
-problems; make sure to mention the fact that the bug is on the
-&arch-title; platform. It can be necessary to use the
-<ulink url="&url-list-subscribe;">debian-&arch-listname; mailing list</ulink>
-as well.
-
-</para>
-
-  </sect2>
-
-<!-- supported cpu docs -->
-&supported-alpha.xml;
-&supported-arm.xml;
-&supported-hppa.xml;
-&supported-i386.xml;
-&supported-ia64.xml;  <!-- FIXME: currently missing -->
-&supported-m68k.xml;
-&supported-mips.xml;
-&supported-mipsel.xml;
-&supported-powerpc.xml;
-&supported-s390.xml;
-&supported-sparc.xml;
-
-  <sect2 id="gfx" arch="not-s390"><title>Graphics Card</title>
-
-<para arch="i386">
-
-You should be using a VGA-compatible display interface for the console
-terminal. Nearly every modern display card is compatible with
-VGA. Ancient standards such CGA, MDA, or HGA should also work,
-assuming you do not require X11 support.  Note that X11 is not used
-during the installation process described in this document.
-
-</para><para>
-
-Debian's support for graphical interfaces is determined by the
-underlying support found in X.Org's X11 system.  Most AGP, PCI and
-PCIe video cards work under X.Org.  Details on supported graphics
-buses, cards, monitors, and pointing devices can be found at
-<ulink url="&url-xorg;"></ulink>.  Debian &release; ships
-with X.Org version &x11ver;.
-
-</para><para arch="mips">
-
-<!-- FIXME: mention explicit graphics chips and not system names -->
-The X.Org X11 window system is only supported on the SGI Indy and the O2.  The
-Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI
-slots and support VGA emulation or Linux framebuffer on a selected range
-of graphics cards.  A <ulink url="&url-bcm91250a-hardware;">compatibility
-listing</ulink> for Broadcom evaluation boards is available.
-
-</para><para arch="mipsel">
-
-The X.Org X11 window system is supported on some DECstation models.  The
-Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI
-slots and support VGA emulation or Linux framebuffer on a selected range
-of graphics cards.  A <ulink url="&url-bcm91250a-hardware;">compatibility
-listing</ulink> for Broadcom evaluation boards is available.
-
-</para>
-
-  </sect2>
-
-  <sect2 arch="i386" id="laptops"><title>Laptops</title>
-<para>
-
-Laptops are also supported.  Laptops are often specialized or contain
-proprietary hardware.  To see if your particular laptop works well
-with GNU/Linux, see the
-<ulink url="&url-x86-laptop;">Linux Laptop pages</ulink>
-
-</para>
-   </sect2>
-
-
-  <sect2 condition="defaults-smp">
-<title>Multiple Processors</title>
-
-<para>
-
-Multi-processor support &mdash; also called <quote>symmetric multi-processing</quote>
-or SMP &mdash; is available for this architecture.  The standard Debian
-&release; kernel image was compiled with SMP support.  This should not
-prevent installation, since the SMP kernel should boot on non-SMP systems;
-the kernel will simply cause a bit more overhead.
-
-</para><para>
-
-In order to optimize the kernel for single CPU systems, you'll have to
-replace the standard Debian kernel.  You can find a discussion of how
-to do this in <xref linkend="kernel-baking"/>.  At this time
-(kernel version &kernelversion;) the way you disable SMP is to deselect
-<quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote>
-section of the kernel config.
-
-</para>
-
-  </sect2>
-
-
-  <sect2 condition="supports-smp">
- <title>Multiple Processors</title>
-<para>
-
-Multi-processor support &mdash; also called <quote>symmetric
-multi-processing</quote> or SMP &mdash; is available for this architecture.
-However, the standard Debian &release; kernel image does not support
-SMP.  This should not prevent installation, since the standard,
-non-SMP kernel should boot on SMP systems; the kernel will simply use
-the first CPU.
-
-</para><para>
-
-In order to take advantage of multiple processors, you'll have to
-replace the standard Debian kernel.  You can find a discussion of how
-to do this in <xref linkend="kernel-baking"/>.  At this time
-(kernel version &kernelversion;) the way you enable SMP is to select
-<quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote>
-section of the kernel config.
-
-</para>
-  </sect2>
-
-  <sect2 condition="supports-smp-sometimes">
- <title>Multiple Processors</title>
-<para>
-
-Multi-processor support &mdash; also called <quote>symmetric
-multi-processing</quote> or SMP &mdash; is available for this architecture,
-and is supported by a precompiled Debian kernel image. Depending on your
-install media, this SMP-capable kernel may or may not be installed by
-default. This should not prevent installation, since the standard,
-non-SMP kernel should boot on SMP systems; the kernel will simply use
-the first CPU.
-
-</para><para>
-
-In order to take advantage of multiple processors, you should check to see
-if a kernel package that supports SMP is installed, and if not, choose an
-appropriate kernel package.
-
-You can also build your own customized kernel to support SMP. You can find
-a discussion of how to do this in <xref linkend="kernel-baking"/>.  At this
-time (kernel version &kernelversion;) the way you enable SMP is to select
-<quote>&smp-config-option;</quote> in the <quote>&smp-config-section;</quote>
-section of the kernel config.
-
-</para>
-  </sect2>
- </sect1>