- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

1 files changed, 0 insertions, 96 deletions

diff --git a/fi/boot-installer/mipsel.xml b/fi/boot-installer/mipsel.xml
deleted file mode 100644
index 69245e3fd..000000000
--- a/fi/boot-installer/mipsel.xml
+++ /dev/null
@@ -1,96 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 35612 untranslated -->
-
-  <sect2 arch="mipsel" id="boot-tftp"><title>Booting with TFTP</title>
-
-   <sect3>
-   <title>Cobalt TFTP Booting</title>
-<para>
-
-Strictly speaking, Cobalt does not use TFTP but NFS to boot.  You need to
-install an NFS server and put the installer files in
-<filename>/nfsroot</filename>.  When you boot your Cobalt, you have to
-press the left and the right cursor buttons at the same time and the
-machine will boot via the network from NFS.  It will then display several
-options on the display.  There are the following two installation methods:
-
-<itemizedlist>
-<listitem><para>
-
-Via SSH (default): In this case, the installer will configure the network
-via DHCP and start an SSH server.  It will then display a random password
-and other login information (such as the IP address) on the Cobalt LCD.
-When you connect to the machine with an SSH client you can start with
-the installation.
-
-</para></listitem>
-<listitem><para>
-
-Via serial console: Using a null modem cable, you can connect to the serial
-port of your Cobalt machine (using 115200 bps) and perform the installation
-this way.  This option is not available on Qube 2700 (Qube1) machines since
-they have no serial port.
-
-</para></listitem>
-</itemizedlist>
-
-</para>
-  </sect3>
-
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
-loader via TFTP which will then load and start the Debian installer.  In
-most cases, you will first obtain an IP address via DHCP but it is also
-possible to configure a static address.  In order to use DHCP, you can
-enter the following command on the CFE prompt:
-
-<informalexample><screen>
-ifconfig eth0 -auto
-</screen></informalexample>
-
-Once you have obtained an IP address, you can load SiByl with the following
-command:
-
-<informalexample><screen>
-boot 192.168.1.1:/boot/sibyl
-</screen></informalexample>
-
-You need to substitute the IP address listed in this example with either
-the name or the IP address of your TFTP server.  Once you issue this
-command, the installer will be loaded automatically.
-
-</para>
-</sect3>
-  </sect2>
-
-  <sect2 arch="mipsel"><title>Boot Parameters</title>
-
-   <sect3>
-   <title>Cobalt TFTP Booting</title>
-<para>
-
-You cannot pass any boot parameters directly.  Instead, you have to edit
-the <filename>/nfsroot/default.colo</filename> file on the NFS server and
-add your parameters to the <replaceable>args</replaceable> variable.
-
-</para>
-  </sect3>
-
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-You cannot pass any boot parameters directly from the CFE prompt.  Instead,
-you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP
-server and add your parameters to the <replaceable>extra_args</replaceable>
-variable.
-
-</para>
-  </sect3>
-
-  </sect2>