- Switch Finnish from XML-based to PO-based translation

- Correct placement of changelog entries from Joey

1 files changed, 0 insertions, 460 deletions

diff --git a/fi/appendix/chroot-install.xml b/fi/appendix/chroot-install.xml
deleted file mode 100644
index cd72a3a88..000000000
--- a/fi/appendix/chroot-install.xml
+++ /dev/null
@@ -1,460 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 36758 untranslated -->
-
- <sect1 id="linux-upgrade">
- <title>Installing &debian; from a Unix/Linux System</title>
-
-<para>
-
-This section explains how to install &debian; from an existing
-Unix or Linux system, without using the menu-driven installer as
-explained in the rest of the manual. This <quote>cross-install</quote>
-HOWTO has been requested by users switching to &debian; from
-Red Hat, Mandrake, and SUSE. In this section some familiarity with
-entering *nix commands and navigating the file system is assumed. In
-this section, <prompt>$</prompt> symbolizes a command to be entered in
-the user's current system, while <prompt>#</prompt> refers to a
-command entered in the Debian chroot.
-
-</para><para>
-
-Once you've got the new Debian system configured to your preference,
-you can migrate your existing user data (if any) to it, and keep on
-rolling. This is therefore a <quote>zero downtime</quote> &debian;
-install. It's also a clever way for dealing with hardware that
-otherwise doesn't play friendly with various boot or installation
-media.
-
-</para>
-
-  <sect2>
-  <title>Getting Started</title>
-<para>
-
-With your current *nix partitioning tools, repartition the hard
-drive as needed, creating at least one filesystem plus swap. You
-need at least 150MB of space available for a console only install,
-or at least 300MB if you plan to install X.
-
-</para><para>
-
-To create file systems on your partitions. For example, to create an
-ext3 file system on partition <filename>/dev/hda6</filename> (that's
-our example root partition):
-
-<informalexample><screen>
-# mke2fs -j /dev/hda6
-</screen></informalexample>
-
-To create an ext2 file system instead, omit <userinput>-j</userinput>.
-
-</para><para>
-
-Initialize and activate swap (substitute the partition number for
-your intended Debian swap partition):
-
-<informalexample><screen>
-# mkswap /dev/hda5
-# sync; sync; sync
-# swapon /dev/hda5
-</screen></informalexample>
-
-Mount one partition as <filename>/mnt/debinst</filename> (the
-installation point, to be the root (<filename>/</filename>) filesystem
-on your new system). The mount point name is strictly arbitrary, it is
-referenced later below.
-
-<informalexample><screen>
-# mkdir /mnt/debinst
-# mount /dev/hda6 /mnt/debinst
-</screen></informalexample>
-
-</para>
-<note><para>
-
-If you want to have parts of the filesystem (e.g. /usr) mounted on
-separate partitions, you will need to create and mount these directories
-manually before proceding with the next stage.
-
-</para></note>
-  </sect2>
-
-  <sect2>
-  <title>Install <command>debootstrap</command></title>
-<para>
-
-The tool that the Debian installer uses, which is recognized as the
-official way to install a Debian base system, is
-<command>debootstrap</command>. It uses <command>wget</command> and
-<command>ar</command>, but otherwise depends only on
-<classname>/bin/sh</classname> and basic Unix/Linux tools<footnote>
-
-<para>
-
-These include the GNU core utilities and commands like <command>sed</command>, <command>grep</command>, <command>tar</command> and <command>gzip</command>.
-
-</para>
-
-</footnote>. Install <command>wget</command> and
-<command>ar</command> if they aren't already on your current system,
-then download and install <command>debootstrap</command>.
-
-</para>
-
-<!-- The files linked to here are from 2004 and thus currently not usable
-<para>
-
-If you have an rpm-based system, you can use alien to convert the
-.deb into .rpm, or download an rpm-ized version at
-<ulink url="http://people.debian.org/~blade/install/debootstrap"></ulink>
-
-</para>
--->
-
-<para>
-
-Or, you can use the following procedure to install it
-manually. Make a work folder for extracting the .deb into:
-
-<informalexample><screen>
-# mkdir work
-# cd work
-</screen></informalexample>
-
-The <command>debootstrap</command> binary is located in the Debian
-archive (be sure to select the proper file for your
-architecture). Download the <command>debootstrap</command> .deb from
-the <ulink url="http://ftp.debian.org/debian/pool/main/d/debootstrap/">
-pool</ulink>, copy the package to the work folder, and extract the
-binary files from it. You will need to have root privileges to install
-the binaries.
-
-<informalexample><screen>
-# ar -x debootstrap_0.X.X_arch.deb
-# cd /
-# zcat /full-path-to-work/work/data.tar.gz | tar xv
-</screen></informalexample>
-
-</para><para>
-
-Note that running <command>debootstrap</command> may require you to have
-a minimal version of <classname>glibc</classname> installed (currently
-GLIBC_2.3). <command>debootstrap</command> itself is a shell script, but
-it calls various utilities that require <classname>glibc</classname>.
-
-</para>
-  </sect2>
-
-  <sect2>
-  <title>Run <command>debootstrap</command></title>
-<para>
-
-<command>debootstrap</command> can download the needed files directly
-from the archive when you run it. You can substitute any Debian
-archive mirror for <userinput>http.us.debian.org/debian</userinput> in
-the command example below, preferably a mirror close to you
-network-wise. Mirrors are listed at
-<ulink url="http://www.debian.org/misc/README.mirrors"></ulink>.
-
-</para><para>
-
-If you have a &releasename; &debian; CD mounted at
-<filename>/cdrom</filename>, you could substitute a file URL instead
-of the http URL: <userinput>file:/cdrom/debian/</userinput>
-
-</para><para>
-
-Substitute one of the following for <replaceable>ARCH</replaceable>
-in the <command>debootstrap</command> command:
-
-<userinput>alpha</userinput>,
-<userinput>arm</userinput>,
-<userinput>hppa</userinput>,
-<userinput>i386</userinput>,
-<userinput>ia64</userinput>,
-<userinput>m68k</userinput>,
-<userinput>mips</userinput>,
-<userinput>mipsel</userinput>,
-<userinput>powerpc</userinput>,
-<userinput>s390</userinput>, or
-<userinput>sparc</userinput>.
-
-<informalexample><screen>
-# /usr/sbin/debootstrap --arch ARCH &releasename; \
-     /mnt/debinst http://http.us.debian.org/debian
-</screen></informalexample>
-
-</para>
-  </sect2>
-
-  <sect2>
-  <title>Configure The Base System</title>
-<para>
-
-Now you've got a real Debian system, though rather lean, on disk.
-<command>Chroot</command> into it:
-
-<informalexample><screen>
-# LANG= chroot /mnt/debinst /bin/bash
-</screen></informalexample>
-
-</para>
-
-   <sect3>
-   <title>Mount Partitions</title>
-<para>
-
-You need to create <filename>/etc/fstab</filename>.
-
-<informalexample><screen>
-# editor /etc/fstab
-</screen></informalexample>
-
-Here is a sample you can modify to suit:
-
-<informalexample><screen>
-# /etc/fstab: static file system information.
-#
-# file system    mount point   type    options                  dump pass
-/dev/XXX         /             ext3    defaults                 0    1
-/dev/XXX         /boot         ext3    ro,nosuid,nodev          0    2
-
-/dev/XXX         none          swap    sw                       0    0
-proc             /proc         proc    defaults                 0    0
-
-/dev/fd0         /mnt/floppy   auto    noauto,rw,sync,user,exec 0    0
-/dev/cdrom       /mnt/cdrom    iso9660 noauto,ro,user,exec      0    0
-
-/dev/XXX         /tmp          ext3    rw,nosuid,nodev          0    2
-/dev/XXX         /var          ext3    rw,nosuid,nodev          0    2
-/dev/XXX         /usr          ext3    rw,nodev                 0    2
-/dev/XXX         /home         ext3    rw,nosuid,nodev          0    2
-</screen></informalexample>
-
-Use <userinput>mount -a</userinput> to mount all the file systems you
-have specified in your <filename>/etc/fstab</filename>, or to mount
-file systems individually use:
-
-<informalexample><screen>
-# mount /path   # e.g.: mount /usr
-</screen></informalexample>
-
-You can mount the proc file system multiple times and to arbitrary
-locations, though <filename>/proc</filename> is customary. If you didn't use
-<userinput>mount -a</userinput>, be sure to mount proc before continuing:
-
-<informalexample><screen>
-# mount -t proc proc /proc
-</screen></informalexample>
-
-</para><para>
-
-The command <userinput>ls /proc</userinput> should now show a non-empty
-directory. Should this fail, you may be able to mount proc from outside
-the chroot:
-
-<informalexample><screen>
-# mount -t proc proc /mnt/debinst/proc
-</screen></informalexample>
-
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Keyboard</title>
-<para>
-
-To configure your keyboard:
-
-<informalexample><screen>
-# dpkg-reconfigure console-data
-</screen></informalexample>
-
-</para><para>
-
-Note that the keyboard cannot be set while in the chroot, but will be
-configured for the next reboot.
-
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Networking</title>
-<para>
-
-To configure networking, edit
-<filename>/etc/network/interfaces</filename>,
-<filename>/etc/resolv.conf</filename>,
-<filename>/etc/hostname</filename> and
-<filename>/etc/hosts</filename>.
-
-<informalexample><screen>
-# editor /etc/network/interfaces
-</screen></informalexample>
-
-Here are some simple examples from
-<filename>/usr/share/doc/ifupdown/examples</filename>:
-
-<informalexample><screen>
-######################################################################
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-# See the interfaces(5) manpage for information on what options are
-# available.
-######################################################################
-
-# We always want the loopback interface.
-#
-auto lo
-iface lo inet loopback
-
-# To use dhcp:
-#
-# auto eth0
-# iface eth0 inet dhcp
-
-# An example static IP setup: (broadcast and gateway are optional)
-#
-# auto eth0
-# iface eth0 inet static
-#     address 192.168.0.42
-#     network 192.168.0.0
-#     netmask 255.255.255.0
-#     broadcast 192.168.0.255
-#     gateway 192.168.0.1
-</screen></informalexample>
-
-Enter your nameserver(s) and search directives in
-<filename>/etc/resolv.conf</filename>:
-
-<informalexample><screen>
-# editor /etc/resolv.conf
-</screen></informalexample>
-
-A simple <filename>/etc/resolv.conf</filename>:
-
-<informalexample><screen>
-search hqdom.local\000
-nameserver 10.1.1.36
-nameserver 192.168.9.100
-</screen></informalexample>
-
-Enter your system's host name (2 to 63 characters):
-
-<informalexample><screen>
-# echo DebianHostName &gt; /etc/hostname
-</screen></informalexample>
-
-If you have multiple network cards, you should arrange the names of
-driver modules in the <filename>/etc/modules</filename> file into the
-desired order. Then during boot, each card will be associated with the
-interface name (eth0, eth1, etc.) that you expect.
-
-</para>
-   </sect3>
-
-   <sect3>
-   <title>Configure Locales</title>
-<para>
-
-To configure your locale settings to use a language other than
-English, install the locales support package and configure it:
-
-<informalexample><screen>
-# apt-get install locales
-# dpkg-reconfigure locales
-</screen></informalexample>
-
-NOTE: Apt must be configured beforehand by creating a sources.list and
-running apt-get update.
-Before using locales with character sets other than ASCII or latin1,
-please consult the appropriate localization HOWTO.
-
-</para>
-   </sect3>
-  </sect2>
-
-  <sect2>
-  <title>Install a Kernel</title>
-<para>
-
-If you intend to boot this system, you probably want a Linux kernel
-and a boot loader. Identify available pre-packaged kernels with
-
-<informalexample><screen>
-# apt-cache search <phrase condition="classic-kpkg">kernel</phrase><phrase condition="common-kpkg">linux</phrase>-image
-</screen></informalexample>
-
-Then install your choice using its package name.
-
-<informalexample><screen>
-# apt-get install <phrase condition="classic-kpkg">kernel</phrase><phrase condition="common-kpkg">linux</phrase>-image-<replaceable>&kernelversion;-arch-etc</replaceable>
-</screen></informalexample>
-
-</para>
-  </sect2>
-
-  <sect2>
-<title>Set up the Boot Loader</title>
-<para>
-
-To make your &debian; system bootable, set up your boot loader to load
-the installed kernel with your new root partition. Note that debootstrap
-does not install a boot loader, though you can use apt-get inside your
-Debian chroot to do so.
-
-</para><para arch="i386">
-
-Check <userinput>info grub</userinput> or <userinput>man
-lilo.conf</userinput> for instructions on setting up the
-bootloader.  If you are keeping the system you used to install Debian, just
-add an entry for the Debian install to your existing grub
-<filename>menu.lst</filename> or <filename>lilo.conf</filename>.  For
-<filename>lilo.conf</filename>, you could also copy it to the new system and
-edit it there. After you are done editing, call lilo (remember it will use
-<filename>lilo.conf</filename> relative to the system you call it from).
-
-</para><para arch="i386">
-
-Here is a basic <filename>/etc/lilo.conf</filename> as an example:
-
-<informalexample><screen>
-boot=/dev/hda6
-root=/dev/hda6
-install=menu
-delay=20
-lba32
-image=/vmlinuz
-label=Debian
-</screen></informalexample>
-
-</para><para arch="powerpc">
-
-Check <userinput>man yaboot.conf</userinput> for instructions on
-setting up the bootloader.  If you are keeping the system you used to
-install Debian, just add an entry for the Debian install to your
-existing <filename>yaboot.conf</filename>.  You could also copy it to
-the new system and
-edit it there. After you are done editing, call ybin (remember it will
-use <filename>yaboot.conf</filename> relative to the system you call it from).
-
-</para><para arch="powerpc">
-
-Here is a basic <filename>/etc/yaboot.conf</filename> as an example:
-
-<informalexample><screen>
-boot=/dev/hda2
-device=hd:
-partition=6
-root=/dev/hda6
-magicboot=/usr/lib/yaboot/ofboot
-timeout=50
-image=/vmlinux
-label=Debian
-</screen></informalexample>
-
-On some machines, you may need to use <userinput>ide0:</userinput>
-instead of <userinput>hd:</userinput>.
-
-</para>
-  </sect2>
- </sect1>