Remove everything about Broadcom SWARM and BigSur since we no longer

support these devices in the installer.

8 files changed, 5 insertions, 163 deletions

diff --git a/en/boot-installer/mips.xml b/en/boot-installer/mips.xml
index ccd7ae422..ab5f659cf 100644
--- a/en/boot-installer/mips.xml
+++ b/en/boot-installer/mips.xml
@@ -28,33 +28,6 @@ in the command monitor to do this.
 </para>
   </sect3>
 
-   <sect3>
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
-loader via TFTP which will then load and start the Debian installer.  In
-most cases, you will first obtain an IP address via DHCP but it is also
-possible to configure a static address.  In order to use DHCP, you can
-enter the following command on the CFE prompt:
-
-<informalexample><screen>
-ifconfig eth0 -auto
-</screen></informalexample>
-
-Once you have obtained an IP address, you can load SiByl with the following
-command:
-
-<informalexample><screen>
-boot 192.168.1.1:/boot/sibyl
-</screen></informalexample>
-
-You need to substitute the IP address listed in this example with either
-the name or the IP address of your TFTP server.  Once you issue this
-command, the installer will be loaded automatically.
-
-</para>
-</sect3>
   </sect2>
 
   <sect2 arch="mips"><title>Boot Parameters</title>
@@ -85,16 +58,4 @@ bootp(): append="root=/dev/sda1"
 </para>
   </sect3>
 
-   <sect3>
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-You cannot pass any boot parameters directly from the CFE prompt.  Instead,
-you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP
-server and add your parameters to the <replaceable>extra_args</replaceable>
-variable.
-
-</para>
-  </sect3>
-
   </sect2>
diff --git a/en/boot-installer/mipsel.xml b/en/boot-installer/mipsel.xml
index e8f073bab..96d7d4c59 100644
--- a/en/boot-installer/mipsel.xml
+++ b/en/boot-installer/mipsel.xml
@@ -36,34 +36,6 @@ this way.
 </para>
   </sect3>
 
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-On the Broadcom BCM91250A and BCM91480B evaluation boards, you have to load the SiByl boot
-loader via TFTP which will then load and start the Debian installer.  In
-most cases, you will first obtain an IP address via DHCP but it is also
-possible to configure a static address.  In order to use DHCP, you can
-enter the following command on the CFE prompt:
-
-<informalexample><screen>
-ifconfig eth0 -auto
-</screen></informalexample>
-
-Once you have obtained an IP address, you can load SiByl with the following
-command:
-
-<informalexample><screen>
-boot 192.168.1.1:/boot/sibyl
-</screen></informalexample>
-
-You need to substitute the IP address listed in this example with either
-the name or the IP address of your TFTP server.  Once you issue this
-command, the installer will be loaded automatically.
-
-</para>
-</sect3>
   </sect2>
 
   <sect2 arch="mipsel"><title>Boot Parameters</title>
@@ -79,17 +51,4 @@ add your parameters to the <replaceable>args</replaceable> variable.
 </para>
   </sect3>
 
-   <sect3>
-<!-- Note to translators: this is the same section as in mips.xml -->
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-You cannot pass any boot parameters directly from the CFE prompt.  Instead,
-you have to edit the <filename>/boot/sibyl.conf</filename> file on the TFTP
-server and add your parameters to the <replaceable>extra_args</replaceable>
-variable.
-
-</para>
-  </sect3>
-
   </sect2>
diff --git a/en/hardware/hardware-supported.xml b/en/hardware/hardware-supported.xml
index 05a5da92e..1d02bd440 100644
--- a/en/hardware/hardware-supported.xml
+++ b/en/hardware/hardware-supported.xml
@@ -99,8 +99,8 @@ variations of each architecture known as <quote>flavors</quote>.
 </row>
 
 <row>
-  <entry morerows="5">MIPS (big endian)</entry>
-  <entry morerows="5">mips</entry>
+  <entry morerows="3">MIPS (big endian)</entry>
+  <entry morerows="3">mips</entry>
   <entry>SGI IP22 (Indy/Indigo 2)</entry>
   <entry>r4k-ip22</entry>
 </row><row>
@@ -112,17 +112,11 @@ variations of each architecture known as <quote>flavors</quote>.
 </row><row>
   <entry>MIPS Malta (64 bit)</entry>
   <entry>5kc-malta</entry>
-</row><row>
-  <entry>Broadcom BCM91250A (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row><row>
-  <entry>Broadcom BCM91480B (BigSur)</entry>
-  <entry>sb1a-bcm91480b</entry>
 </row>
 
 <row>
-  <entry morerows="4">MIPS (little endian)</entry>
-  <entry morerows="4">mipsel</entry>
+  <entry morerows="2">MIPS (little endian)</entry>
+  <entry morerows="2">mipsel</entry>
   <entry>Cobalt</entry>
   <entry>cobalt</entry>
 </row><row>
@@ -131,12 +125,6 @@ variations of each architecture known as <quote>flavors</quote>.
 </row><row>
   <entry>MIPS Malta (64 bit)</entry>
   <entry>5kc-malta</entry>
-</row><row>
-  <entry>Broadcom BCM91250A (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row><row>
-  <entry>Broadcom BCM91480B (BigSur)</entry>
-  <entry>sb1a-bcm91480b</entry>
 </row>
 
 <row arch="m68k">
@@ -358,13 +346,6 @@ with X.Org version &x11ver;.
 <!-- FIXME: mention explicit graphics chips and not system names -->
 The X.Org X Window System is only supported on the SGI Indy and the O2.
 
-</para><para arch="mips;mipsel">
-
-The Broadcom BCM91250A and BCM91480B evaluation boards have standard 3.3v PCI
-slots and support VGA emulation or Linux framebuffer on a selected range
-of graphics cards.  A <ulink url="&url-bcm91250a-hardware;">compatibility
-listing</ulink> for Broadcom evaluation boards is available.
-
 </para><para arch="sparc">
 
 Most graphics options commonly found on Sparc-based machines are supported.
diff --git a/en/hardware/installation-media.xml b/en/hardware/installation-media.xml
index acf67e4d2..8c6e6def3 100644
--- a/en/hardware/installation-media.xml
+++ b/en/hardware/installation-media.xml
@@ -85,14 +85,6 @@ capability. If your CD-ROM drive has a jumper labeled
 To start the install, simply choose the <quote>System installation</quote>
 entry in the firmware.
 
-</para><para arch="mips;mipsel">
-
-The Broadcom BCM91250A supports standard IDE devices,
-including CD-ROM drives, but CD images for this platform are currently not
-provided because the firmware doesn't recognize CD drives.  In order to
-install Debian on an Broadcom BCM91480B evaluation board, you need an PCI
-IDE, SATA or SCSI card.
-
 </para>
   </sect2>
 
diff --git a/en/hardware/supported-peripherals.xml b/en/hardware/supported-peripherals.xml
index 2b25fe995..c186c7ffb 100644
--- a/en/hardware/supported-peripherals.xml
+++ b/en/hardware/supported-peripherals.xml
@@ -27,12 +27,6 @@ Package installations from XPRAM and tape are not supported by this
 system.  All packages that you want to install need to be available on a
 DASD or over the network using NFS, HTTP or FTP.
 
-</para><para arch="mips;mipsel">
-
-The Broadcom BCM91250A evaluation board offers standard 3.3v 32 bit and 64
-bit PCI slots as well as USB connectors.  The Broadcom BCM91480B evaluation
-board features four 64 bit PCI slots.
-
 </para><para arch="mipsel">
 
 The Cobalt RaQ has no support for additional devices but the Qube has one
diff --git a/en/hardware/supported/mips.xml b/en/hardware/supported/mips.xml
index a75601060..fecec2d54 100644
--- a/en/hardware/supported/mips.xml
+++ b/en/hardware/supported/mips.xml
@@ -26,18 +26,6 @@ MIPS Malta: this platform is emulated by QEMU and is therefore a nice way
 to test and run Debian on MIPS if you don't have the hardware.
 
 </para></listitem>
-<listitem><para>
-
-Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board
-from Broadcom based on the dual-core SB1 1250 CPU.
-
-</para></listitem>
-<listitem><para>
-
-Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board
-from Broadcom based on the quad-core SB1A 1480 CPU.
-
-</para></listitem>
 </itemizedlist>
 
 Complete information regarding supported mips/mipsel machines can be found
@@ -55,10 +43,6 @@ debian-&arch-listname; mailing list</ulink>.
 On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400, R4600 and R5000
 processors are supported by the Debian installation system on big endian
 MIPS.  On SGI IP32, currently only systems based on the R5000 are supported.
-The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with
-two cores which are supported in SMP mode by this installer.  Similarly,
-the BCM91480B evaluation board contains an SB1A 1480 chip with four cores
-which are supported in SMP mode.
 
 </para><para>
 
diff --git a/en/hardware/supported/mipsel.xml b/en/hardware/supported/mipsel.xml
index c46037b5f..ac6d09ae4 100644
--- a/en/hardware/supported/mipsel.xml
+++ b/en/hardware/supported/mipsel.xml
@@ -20,18 +20,6 @@ MIPS Malta: this platform is emulated by QEMU and is therefore a nice way
 to test and run Debian on MIPS if you don't have the hardware.
 
 </para></listitem>
-<listitem><para>
-
-Broadcom BCM91250A (SWARM): this is an ATX form factor evaluation board
-from Broadcom based on the dual-core SB1 1250 CPU.
-
-</para></listitem>
-<listitem><para>
-
-Broadcom BCM91480B (BigSur): this is an ATX form factor evaluation board
-from Broadcom based on the quad-core SB1A 1480 CPU.
-
-</para></listitem>
 </itemizedlist>
 
 Complete information regarding supported mips/mipsel machines can be found
@@ -50,20 +38,13 @@ debian-&arch-listname; mailing list</ulink>.
 All MIPS based Cobalt machines are supported with the exception of the
 Qube 2700 (Qube 1).
 
-</para><para>
-
-The Broadcom BCM91250A evaluation board comes with an SB1 1250 chip with
-two cores which are supported in SMP mode by this installer.  Similarly,
-the BCM91480B evaluation board contains an SB1A 1480 chip with four cores
-which are supported in SMP mode.
-
 </para>
    </sect3>
 
    <sect3><title>Supported console options</title>
 <para>
 
-Both Cobalt and Broadcom BCM91250A/BCM91480B use 115200 bps.
+Cobalt machines use 115200 bps.
 
 </para>
    </sect3>
diff --git a/en/install-methods/install-tftp.xml b/en/install-methods/install-tftp.xml
index 68f9832fa..efd69e631 100644
--- a/en/install-methods/install-tftp.xml
+++ b/en/install-methods/install-tftp.xml
@@ -308,16 +308,6 @@ the <userinput>filename=</userinput> option in
 </para>
    </sect3>
 
-   <sect3 arch="mips;mipsel">
-   <title>Broadcom BCM91250A and BCM91480B TFTP Booting</title>
-<para>
-
-You don't have to configure DHCP in a special way because you'll pass the
-full path of the file to be loaded to CFE.
-
-</para>
-   </sect3>
-
   </sect2>
 
 <!-- FIXME: commented out since it seems too old to be usable and a current