merge in ex-base-config branch

8 files changed, 2 insertions, 684 deletions

diff --git a/en/boot-new/boot-new.xml b/en/boot-new/boot-new.xml
index f045e1f3c..c9b30b719 100644
--- a/en/boot-new/boot-new.xml
+++ b/en/boot-new/boot-new.xml
@@ -189,47 +189,14 @@ for more information.
    </sect2>
  </sect1>
 
- <sect1 id="base-config">
- <title>Debian Post-Boot (Base) Configuration</title>
-
-<para>
-
-After booting, you will be prompted to complete the configuration of
-your basic system, and then to select what additional packages you
-wish to install.  The application which guides you through this
-process is called <classname>base-config</classname>. Its concept is
-very similar to the &d-i; from the first stage.  Indeed,
-<classname>base-config</classname> consists of a number of specialized
-components, where each component handles one configuration task,
-contains <quote>hidden menu in the background</quote> and also uses
-the same navigation system.
-
-</para><para>
-
-If you wish to re-run the <classname>base-config</classname> at any
-point after installation is complete, as root run
-<userinput>base-config</userinput>.
-
-</para>
-
-&module-bc-timezone.xml;
-&module-bc-shadow.xml;
-&module-bc-ppp.xml;
-&module-bc-apt.xml;
-&module-bc-packages.xml;
-&module-bc-install.xml;
-&module-bc-mta.xml;
-
- </sect1>
-
  <sect1 id="login">
  <title>Log In</title>
 
 <para>
 
-After you've installed packages, you'll be presented with the login
+Once your system boots, you'll be presented with the login
 prompt.  Log in using the personal login and password you
-selected. Your system is now ready to use.
+selected during the installation process. Your system is now ready to use.
 
 </para><para>
 
diff --git a/en/boot-new/modules/apt.xml b/en/boot-new/modules/apt.xml
deleted file mode 100644
index 5419d284b..000000000
--- a/en/boot-new/modules/apt.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="configure-apt">
- <title>Configuring APT</title>
-
-<para>
-
-The main means that people use to install packages on their system is
-via a program called <command>apt-get</command>, from the
-<classname>apt</classname> package.<footnote>
-
-<para>
-
-Note that the actual program that installs packages is called
-<command>dpkg</command>.  However, this package is more of a low-level
-tool.  <command>apt-get</command> is a higher-level tool as it will
-invoke <command>dpkg</command> as appropriate and also because it knows
-to install other packages which are required for the package you're
-trying to install, as well as how to retrieve the package from your
-CD, the network, or wherever.
-
-</para>
-</footnote>
-Other front-ends for package management, like <command>aptitude</command>,
-<command>synaptic</command> and the older <command>dselect</command> also
-use and depend on <command>apt-get</command>. These front-ends are recommended
-for new users, since they integrate some additional features (package
-searching and status checks) in a nice user interface.
-
-</para><para>
-
-APT must be configured so that it knows where to retrieve packages from.
-The helper application which assists in this task is called
-<command>apt-setup</command>.
-
-</para><para>
-
-The next step in your configuration process is to tell APT where other
-Debian packages can be found.  Note that you can re-run this tool at
-any point after installation by running <command>apt-setup</command>,
-or by manually editing <filename>/etc/apt/sources.list</filename>.
-
-</para><para>
-
-If an official CD-ROM is in the drive at this point, then that CD-ROM
-should automatically be configured as an apt source without prompting.
-You will notice this because you will see the CD-ROM being scanned.
-
-</para><para>
-
-For users without an official CD-ROM, you will be offered an array of
-choices for how Debian packages are accessed: FTP, HTTP, CD-ROM, or
-a local file system.
-
-</para><para>
-
-You should know that it's perfectly acceptable to have a number of
-different APT sources, even for the same Debian archive.
-<command>apt-get</command> will automatically pick the package with
-the highest version number given all the available versions.  Or, for
-instance, if you have both an HTTP and a CD-ROM APT source,
-<command>apt-get</command> should automatically use the local CD-ROM
-when possible, and only resort to HTTP if a newer version is available
-there.  However, it is not a good idea to add unnecessary APT sources,
-since this will tend to slow down the process of checking the network
-archives for new versions.
-
-</para>
-
-  <sect3 id="configure-apt-net">
-  <title>Configuring Network Package Sources</title>
-
-<para>
-
-If you plan on installing the rest of your system via the network, the
-most common option is to select the <userinput>http</userinput>
-source.  The <userinput>ftp</userinput> source is also acceptable, but
-tends to be somewhat slower making connections.
-
-</para><para>
-
-The next step during the configuration of network package sources is
-to tell <command>apt-setup</command> which country you live in.  This
-configures which of the official Debian Internet mirrors you will
-connect to.  Depending on which country you select, you will be presented
-with a list of possible servers.  It's generally fine to pick the one at
-the top of the list, but any of them should work. Note however that the
-mirror list provided by the installation was generated when this version
-of Debian was released and some mirrors may no longer be available.
-
-</para><para>
-
-After you have selected a mirror, you will be asked if a proxy server
-should be used. A proxy server is a server that will forward all your
-HTTP and/or FTP requests to the Internet and is most often used to regulate
-and optimize access to the Internet on corporate networks. In some networks
-only the proxy server is allowed access to the Internet, in which case you
-will have to enter the name of the proxy server. You may also have to
-include an user name and password. Most home users will not need to specify
-a proxy server, although some ISPs may provide proxy servers for their
-users.
-
-</para><para>
-
-After you select a mirror, your new network package source will be tested.
-If all goes well, you will be prompted whether you want to add another
-package source. If you have any problems using the package source you selected,
-try using a different mirror (either from your country list or from the
-global list), or try using a different network package source.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/en/boot-new/modules/install.xml b/en/boot-new/modules/install.xml
deleted file mode 100644
index 30f9a81d0..000000000
--- a/en/boot-new/modules/install.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="debconf">
- <title>Prompts During Software Installation</title>
-
-<para>
-
-Each package you selected with <command>tasksel</command> or
-<command>aptitude</command> is
-downloaded, unpacked and then installed in turn by the
-<command>apt-get</command> and <command>dpkg</command> programs. If
-a particular program needs more information from the user, it will
-prompt you during this process. You might also want to keep an eye on
-the output during the process, to watch for any installation errors
-(although you will be asked to acknowledge errors which prevented
-a package's installation).
-
-</para>
-
-  <sect3 arch="powerpc" id="xserver">
-  <title>Settings for the X Server</title>
-
-<para>
-
-On iMacs, and some older Macintoshes as well, the X Server software
-doesn't calculate appropriate video settings. You will need to choose
-the <guimenuitem>Advanced</guimenuitem> option during configuration of the
-video settings. For the monitor's horizontal sync range, enter 59&ndash;63.
-You can leave the default for vertical refresh range.
-
-</para><para>
-
-The mouse device should be set to
-<userinput>/dev/input/mice</userinput>.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/en/boot-new/modules/mta.xml b/en/boot-new/modules/mta.xml
deleted file mode 100644
index 8c9ba2f28..000000000
--- a/en/boot-new/modules/mta.xml
+++ /dev/null
@@ -1,93 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="base-config-mta">
- <title>Configuring Your Mail Transport Agent</title>
-
-<para>
-
-Today, email is a very important part of many people's life, so it's
-no surprise Debian lets you configure your mail system right as a part
-of the installation process. The standard mail transport agent in
-Debian is <command>exim4</command>, which is relatively small,
-flexible, and easy to learn.
-
-</para><para>
-
-You may ask if this is needed even if your computer is not connected
-to any network. The short answer is: Yes. The longer explanation: Some
-system utilities (like <command>cron</command>,
-<command>quota</command>, <command>aide</command>, &hellip;) may send
-you important notices via email.
-
-</para><para>
-
-So on the first screen you will be presented with several common mail
-scenarios. Choose the one that most closely resembles your needs:
-
-</para>
-
-<variablelist>
-<varlistentry>
-<term>internet site</term>
-<listitem><para>
-
-Your system is connected to a network and your mail is sent and
-received directly using SMTP. On the following screens you will be
-asked a few basic questions, like your machine's mail name, or a list of
-domains for which you accept or relay mail.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>mail sent by smarthost</term>
-<listitem><para>
-
-In this scenario is your outgoing mail forwarded to another machine,
-called a <quote>smarthost</quote>, which does the actual job for
-you. Smarthost also usually stores incoming mail addressed to your
-computer, so you don't need to be permanently online. That also means
-you have to download your mail from the smarthost via programs like
-fetchmail. This option is suitable for dial-up users.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>local delivery only</term>
-<listitem><para>
-
-Your system is not on a network and mail is sent or received only
-between local users. Even if you don't plan to send any messages, this
-option is highly recommended, because some system utilities may send
-you various alerts from time to time (e.g. beloved <quote>Disk quota
-exceeded</quote>). This option is also convenient for new users,
-because it doesn't ask any further questions.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>no configuration at this time</term>
-<listitem><para>
-
-Choose this if you are absolutely convinced you know what you are
-doing. This will leave you with an unconfigured mail system &mdash;
-until you configure it, you won't be able to send or receive any mail
-and you may miss some important messages from your system utilities.
-
-</para></listitem>
-</varlistentry>
-</variablelist>
-
-<para>
-
-If none of these scenarios suits your needs, or if you need a finer
-setup, you will need to edit configuration files under the
-<filename>/etc/exim4</filename> directory after the installation is
-complete. More information about <command>exim4</command> may be found
-under <filename>/usr/share/doc/exim4</filename>.
-
-</para>
- </sect2>
diff --git a/en/boot-new/modules/packages.xml b/en/boot-new/modules/packages.xml
deleted file mode 100644
index b1a4ce454..000000000
--- a/en/boot-new/modules/packages.xml
+++ /dev/null
@@ -1,162 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="install-packages">
- <title>Package Installation</title>
-
-<para>
-
-Next you will be offered a number of pre-rolled software
-configurations offered by Debian. You could always choose, package by
-package, what you want to install on your new machine.  This is the
-purpose of the <command>aptitude</command> program, described below.
-But this can be a long task with around &num-of-distrib-pkgs; packages
-available in Debian!
-
-</para><para>
-
-So, you have the ability to choose <emphasis>tasks</emphasis> first,
-and then add on more individual packages later.  These tasks loosely
-represent a number of different jobs or things you want to do with
-your computer, such as <quote>desktop environment</quote>,
-<quote>web server</quote>, or <quote>print server</quote><footnote>
-
-<para>
-
-You should know that to present this list,
-<command>base-config</command> is merely invoking the
-<command>tasksel</command> program.  For manual package
-selection, the
-<command>aptitude</command> program is being run.  Any of these can be
-run at any time after installation to install (or remove) more
-packages.  If you are looking for a specific single package, after
-installation is complete, simply run <userinput>aptitude install
-<replaceable>package</replaceable></userinput>, where
-<replaceable>package</replaceable> is the name of the package you are
-looking for.
-
-</para>
-
-</footnote>. <xref linkend="tasksel-size-list"/> lists the space
-requirements for the available tasks.
-
-</para><para>
-
-Once you've selected your tasks, select
-<guibutton>Ok</guibutton>. At this point,
-<command>aptitude</command> will install the packages you've
-selected.
-
-<note><para>
-
-Even if you did not select any tasks at all, any standard,
-important, or required priority packages that are not yet present on
-your system will be installed.  This functionality is the same as
-running <userinput>tasksel -ris</userinput> at the command line, and
-currently involves
-a download of about 37M of archives. You will be shown the number of
-packages to be installed, and how many kilobytes of packages, if any,
-need to be downloaded.
-
-</para></note>
-
-</para><para>
-
-If you do want to choose what to install on a package by package basis,
-select the <quote>manual package selection</quote> option in
-<command>tasksel</command>. If you select one or more tasks alongside
-this option, <command>aptitude</command> will be called with the
-<command>--visual-preview</command> option. This means you will be able to review<footnote>
-
-<para>
-
-You can also change the default selections. If you would like to select any
-additional package, use <menuchoice> <guimenu>View</guimenu>
-<guimenuitem>New Package View</guimenuitem> </menuchoice>.
-
-</para>
-
-</footnote> the packages that are to be installed. If you do not select any
-tasks, the normal <command>aptitude</command> screen will be displayed. After
-making your selections you should press <quote><userinput>g</userinput></quote>
-to start the download and installation of packages.
-
-<note><para>
-
-If you choose <quote>manual package selection</quote>
-<emphasis>without</emphasis> selecting any tasks, no packages will be installed
-by default. This means you can use this option if you want to install a minimal
-system, but also that the responsibility for selecting any packages not
-installed as part of the base system (before the reboot) that might be required
-for your system lies with you.
-
-</para></note>
-
-</para><para>
-
-Of the &num-of-distrib-pkgs; packages available in Debian, only
-a small minority are covered by tasks offered in the Task Installer.
-To see information on more packages, either use <userinput>apt-cache
-search <replaceable>search-string</replaceable></userinput> for some
-given search string (see the <citerefentry>
-<refentrytitle>apt-cache</refentrytitle> <manvolnum>8</manvolnum>
-</citerefentry> man page), or run
-<command>aptitude</command> as described below.
-
-</para>
-
- <sect3 id="aptitude">
- <title>Advanced Package Selection with <command>aptitude</command></title>
-
-<para>
-
-<command>Aptitude</command> is a modern program for managing
-packages. <command>aptitude</command> allows you to
-select individual packages, set of packages matching given criteria
-(for advanced users), or whole tasks.
-
-</para><para>
-
-The most basic keybindings are:
-
-<informaltable>
-<tgroup cols="2">
-<thead>
-<row>
-  <entry>Key</entry><entry>Action</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry><keycap>Up</keycap>, <keycap>Down</keycap></entry>
-  <entry>Move selection up or down.</entry>
-</row><row>
-  <entry>&enterkey;</entry>
-  <entry>Open/collapse/activate item.</entry>
-</row><row>
-  <entry><keycap>+</keycap></entry>
-  <entry>Mark package for installation.</entry>
-</row><row>
-  <entry><keycap>-</keycap></entry>
-  <entry>Mark package for removal.</entry>
-</row><row>
-  <entry><keycap>d</keycap></entry>
-  <entry>Show package dependencies.</entry>
-</row><row>
-  <entry><keycap>g</keycap></entry>
-  <entry>Actually download/install/remove packages.</entry>
-</row><row>
-  <entry><keycap>q</keycap></entry>
-  <entry>Quit current view.</entry>
-</row><row>
-  <entry><keycap>F10</keycap></entry>
-  <entry>Activate menu.</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-For more commands see the online help under the <keycap>?</keycap> key.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/en/boot-new/modules/ppp.xml b/en/boot-new/modules/ppp.xml
deleted file mode 100644
index bd805fa28..000000000
--- a/en/boot-new/modules/ppp.xml
+++ /dev/null
@@ -1,142 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 arch="not-s390" id="PPP">
- <title>Setting Up PPP</title>
-
-<para>
-
-If no network was configured during the first stage of the installation,
-you will next be asked whether you wish to install the rest of the system
-using PPP. PPP is a protocol used to establish dialup connections with modems.
-If you configure the modem at this point, the installation system will be able
-to download additional packages or security updates from the Internet during
-the next steps of the installation.
-If you don't have a modem in your computer or if you prefer to configure
-your modem after the installation, you can skip this step.
-
-</para><para>
-
-In order to configure your PPP connection, you will need some information
-from your  Internet Service Provider (ISP), including phone number, username,
-password and DNS servers (optional). Some ISPs provide installation guidelines
-for Linux distributions. You can use that information even if they don't
-specifically target Debian since most of the configuration parameters
-(and software) is similar amongst Linux distributions.
-
-</para><para>
-
-If you do choose to configure PPP at this point, a program named
-<command>pppconfig</command> will be run.  This program helps you
-configure your PPP connection.  <emphasis>Make sure, when it asks you
-for the name of your dialup connection, that you name it
-<userinput>provider</userinput>.</emphasis>
-
-</para><para>
-
-Hopefully, the <command>pppconfig</command> program will walk you
-through a trouble-free PPP connection setup.  However, if it does not
-work for you, see below for detailed instructions.
-
-</para><para>
-
-In order to setup PPP, you'll need to know the basics of file viewing
-and editing in GNU/Linux.  To view files, you should use
-<command>more</command>, and <command>zmore</command> for compressed
-files with a <userinput>.gz</userinput> extension.  For example, to
-view <filename>README.debian.gz</filename>, type <userinput>zmore
-README.debian.gz</userinput>.  The base system comes with an editor
-named <command>nano</command>, which is very simple to use, but does
-not have a lot of features. You will probably want to install more
-full-featured editors and viewers later, such as
-<command>jed</command>, <command>nvi</command>,
-<command>less</command>, and <command>emacs</command>.
-
-</para><para>
-
-Edit <filename>/etc/ppp/peers/provider</filename> and replace
-<userinput>/dev/modem</userinput> with
-<userinput>/dev/ttyS<replaceable>&num;</replaceable></userinput> where
-<replaceable>&num;</replaceable> stands for the number of your serial
-port. In Linux, serial ports are counted from 0; your first serial
-port <phrase arch="i386">(i.e., <userinput>COM1</userinput>)</phrase>
-is <filename>/dev/ttyS0</filename> under Linux.
-
-<phrase arch="powerpc;m68k">On Macintoshes with serial ports, the
-modem port is <filename>/dev/ttyS0</filename> and the printer port is
-<filename>/dev/ttyS1</filename>.</phrase>
-
-The next step is to edit
-<filename>/etc/chatscripts/provider</filename> and insert your
-provider's phone number, your user-name and password. Please do not
-delete the <quote>\q</quote> that precedes the password. It hides the
-password from appearing in your log files.
-
-</para><para>
-
-Many providers use PAP or CHAP for login sequence instead of text mode
-authentication.  Others use both.  If your provider requires PAP or
-CHAP, you'll need to follow a different procedure.  Comment out
-everything below the dialing string (the one that starts with
-<quote>ATDT</quote>) in
-<filename>/etc/chatscripts/provider</filename>, modify
-<filename>/etc/ppp/peers/provider</filename> as described above, and
-add <userinput>user <replaceable>name</replaceable></userinput> where
-<replaceable>name</replaceable> stands for your user-name for the
-provider you are trying to connect to.  Next, edit
-<filename>/etc/ppp/pap-secrets</filename> or
-<filename>/etc/ppp/chap-secrets</filename> and enter your password
-there.
-
-</para><para>
-
-You will also need to edit <filename>/etc/resolv.conf</filename> and
-add your provider's name server (DNS) IP addresses.  The lines in
-<filename>/etc/resolv.conf</filename> are in the following format:
-<userinput>nameserver
-<replaceable>xxx.xxx.xxx.xxx</replaceable></userinput> where the
-<replaceable>x</replaceable>s stand for numbers in your IP
-address. Optionally, you could add the
-<userinput>usepeerdns</userinput> option to the
-<filename>/etc/ppp/peers/provider</filename> file, which will enable
-automatic choosing of appropriate DNS servers, using settings the
-remote host usually provides.
-
-</para><para>
-
-Unless your provider has a login sequence different from the majority
-of ISPs, you are done! Start the PPP connection by typing
-<command>pon</command> as root, and monitor the process using
-<command>plog</command> command. To disconnect, use
-<command>poff</command>, again, as root.
-
-</para><para>
-
-Read <filename>/usr/share/doc/ppp/README.Debian.gz</filename> file for
-more information on using PPP on Debian.
-
-</para><para>
-
-For static SLIP connections, you will need to add the
-<userinput>slattach</userinput> command (from the
-<classname>net-tools</classname> package) into
-<filename>/etc/init.d/network</filename>. Dynamic SLIP will require
-the <classname>gnudip</classname> package.
-
-</para>
-
-  <sect3 id="PPPOE">
-  <title>Setting Up PPP over Ethernet (PPPOE)</title>
-
-<para>
-
-PPPOE is a protocol related to PPP used for some broadband connections.
-There is currently no support in base configuration to help you set
-this up. However, the necessary software has been installed, which means
-you can configure PPPOE manually at this stage of the installation by
-switching to VT2 and running <command>pppoeconf</command>.
-
-</para>
-
-  </sect3>
- </sect2>
diff --git a/en/boot-new/modules/shadow.xml b/en/boot-new/modules/shadow.xml
deleted file mode 100644
index cfcc4daa1..000000000
--- a/en/boot-new/modules/shadow.xml
+++ /dev/null
@@ -1,69 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="base-config-users">
- <title>Setting Up Users And Passwords</title>
-
-  <sect3 id="base-config-root">
-  <title>Set the Root Password</title>
-
-<para>
-
-The <emphasis>root</emphasis> account is also called the
-<emphasis>super-user</emphasis>; it is a login that bypasses all
-security protection on your system. The root account should only be
-used to perform system administration, and only used for as short
-a time as possible.
-
-</para><para>
-
-Any password you create should contain at least 6 characters, and
-should contain both upper- and lower-case characters, as well as
-punctuation characters.  Take extra care when setting your root
-password, since it is such a powerful account.  Avoid dictionary
-words or use of any personal information which could be guessed.
-
-</para><para>
-
-If anyone ever tells you they need your root password, be extremely
-wary. You should normally never give your root password out, unless you
-are administering a machine with more than one system administrator.
-
-</para>
-  </sect3>
-
-  <sect3 id="make-normal-user">
-  <title>Create an Ordinary User</title>
-
-<para>
-
-The system will ask you whether you wish to create an ordinary user
-account at this point.  This account should be your main personal
-log-in.  You should <emphasis>not</emphasis> use the root account for
-daily use or as your personal login.
-
-</para><para>
-
-Why not?  Well, one reason to avoid using root's privileges is that it
-is very easy to do irreparable damage as root.  Another reason is that
-you might be tricked into running a <emphasis>Trojan-horse</emphasis>
-program &mdash; that is a program that takes advantage of your
-super-user powers to compromise the security of your system behind
-your back. Any good book on Unix system administration will cover this
-topic in more detail &mdash; consider reading one if it is new to you.
-
-</para><para>
-
-You will first be prompted for the user's full name. Then you'll be asked
-for a name for the user account; generally your first name or something
-similar will suffice and indeed will be the default. Finally, you will be
-prompted for a password for this account.
-
-</para><para>
-
-If at any point after installation you would like to create another
-account, use the <command>adduser</command> command.
-
-</para>
-  </sect3>
- </sect2>
diff --git a/en/boot-new/modules/timezone.xml b/en/boot-new/modules/timezone.xml
deleted file mode 100644
index 30d9dce0a..000000000
--- a/en/boot-new/modules/timezone.xml
+++ /dev/null
@@ -1,30 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- $Id$ -->
-
- <sect2 id="base-config-tz">
- <title>Configuring Your Time Zone</title>
-
-<para>
-
-After a welcome screen, you will be prompted to configure your time zone.
-First select whether the hardware clock of your system is set to local
-time or Greenwich Mean Time (GMT or UTC). The time displayed in the dialog
-may help you decide on the correct option.
-<phrase arch="m68k;powerpc">Macintosh hardware clocks are normally
-set to local time. If you want to dual-boot, select local time instead of
-GMT.</phrase>
-<phrase arch="i386">Systems that (also) run Dos or Windows are normally
-set to local time. If you want to dual-boot, select local time instead of
-GMT.</phrase>
-
-</para><para>
-
-Depending on the location selected at the beginning of the installation
-process, you will next be shown either a single timezone or a list of
-timezones relevant for that location. If a single timezone is shown, choose
-<guibutton>Yes</guibutton> to confirm or choose <guibutton>No</guibutton>
-to select from the full list of timezones. If a list is shown, select your
-timezone from the list, or select Other for the full list.
-
-</para>
- </sect2>