Remove all untranslated documents for Danish

17 files changed, 0 insertions, 2303 deletions

diff --git a/da/hardware/hardware-supported.xml b/da/hardware/hardware-supported.xml
deleted file mode 100644
index 6c3602fc5..000000000
--- a/da/hardware/hardware-supported.xml
+++ /dev/null
@@ -1,345 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22237 untranslated -->
-
- <sect1 id="hardware-supported">
- <title>Supported Hardware</title>
-
-<para>
-
-Debian does not impose hardware requirements beyond the requirements
-of the Linux kernel and the GNU tool-sets.  Therefore, any
-architecture or platform to which the Linux kernel, libc,
-<command>gcc</command>, etc. have been ported, and for which a Debian
-port exists, can run Debian. Please refer to the Ports pages at
-<ulink url="&url-ports;"></ulink> for
-more details on &arch-title; architecture systems which have been
-tested with Debian.
-
-</para><para>
-
-Rather than attempting to describe all the different hardware
-configurations which are supported for &arch-title;, this section
-contains general information and pointers to where additional
-information can be found.
-
-</para>
-
-  <sect2><title>Supported Architectures</title>
-
-<para>
-
-Debian &release; supports eleven major architectures and several
-variations of each architecture known as 'flavors'. 
-
-</para><para>
-
-<informaltable>
-<tgroup cols="4">
-<thead>
-<row>
-  <entry>Architecture</entry><entry>Debian Designation</entry>
-  <entry>Subarchitecture</entry><entry>Flavor</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="2">Intel x86-based</entry>
-  <entry morerows="2">i386</entry>
-  <entry morerows="2"></entry>
-  <entry>vanilla</entry>
-</row><row>
-  <entry>speakup</entry>
-</row><row>
-  <entry>linux26</entry>
-</row>
-
-<row>
-  <entry morerows="5">Motorola 680x0</entry>
-  <entry morerows="5">m68k</entry>
-  <entry>Atari</entry>
-  <entry>atari</entry>
-</row><row>
-  <entry>Amiga</entry>
-  <entry>amiga</entry>
-</row><row>
-  <entry>68k Macintosh</entry>
-  <entry>mac</entry>
-</row><row>
-  <entry morerows="2">VME</entry>
-  <entry>bvme6000</entry>
-</row><row>
-  <entry>mvme147</entry>
-</row><row>
-  <entry>mvme16x</entry>
-</row>
-
-<row>
-  <entry morerows="2">DEC Alpha</entry>
-  <entry morerows="2">alpha</entry>
-  <entry morerows="2"></entry>
-  <entry>generic</entry>
-</row><row>
-  <entry>jensen</entry>
-</row><row>
-  <entry>nautilus</entry>
-</row>
-
-<row>
-  <entry morerows="1">Sun SPARC</entry>
-  <entry morerows="1">sparc</entry>
-  <entry morerows="1"></entry>
-  <entry>sun4cdm</entry>
-</row><row>
-  <entry>sun4u</entry>
-</row>
-
-<row>
-  <entry morerows="3">ARM and StrongARM</entry>
-  <entry morerows="3">arm</entry>
-  <entry morerows="3"></entry>
-  <entry>netwinder</entry>
-</row><row>
-  <entry>riscpc</entry>
-</row><row>
-  <entry>shark</entry>
-</row><row>
-  <entry>lart</entry>
-</row>
-
-<row>
-  <entry morerows="3">IBM/Motorola PowerPC</entry>
-  <entry morerows="3">powerpc</entry>
-  <entry>CHRP</entry>
-  <entry>chrp</entry>
-</row><row>
-  <entry>PowerMac</entry>
-  <entry>powermac, new-powermac</entry>
-</row><row>
-  <entry>PReP</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>APUS</entry>
-  <entry>apus</entry>
-</row>
-
-<row>
-  <entry morerows="1">HP PA-RISC</entry>
-  <entry morerows="1">hppa</entry>
-  <entry>PA-RISC 1.1</entry>
-  <entry>32</entry>
-</row><row>
-  <entry>PA-RISC 2.0</entry>
-  <entry>64</entry>
-</row>
-
-<row>
-  <entry>Intel ia64-based</entry>
-  <entry>ia64</entry>
-  <entry></entry>
-  <entry></entry>
-</row>
-
-<row>
-  <entry morerows="2">MIPS (big endian)</entry>
-  <entry morerows="2">mips</entry>
-  <entry morerows="1">SGI Indy/Indigo 2</entry>
-  <entry>r4k-ip22</entry>
-</row><row>
-  <entry>r5k-ip22</entry>
-</row><row>
-  <entry>Broadcom BCM1250 (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row>
-
-<row>
-  <entry morerows="3">MIPS (little endian)</entry>
-  <entry morerows="3">mipsel</entry>
-  <entry>Cobalt</entry>
-  <entry>cobalt</entry>
-</row><row>
-  <entry morerows="1">DECstation</entry>
-  <entry>r4k-kn04</entry>
-</row><row>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>Broadcom BCM1250 (SWARM)</entry>
-  <entry>sb1-bcm91250a</entry>
-</row>
-
-<row>
-  <entry morerows="1">IBM S/390</entry>
-  <entry morerows="1">s390</entry>
-  <entry morerows="1"></entry>
-  <entry>tape</entry>
-</row><row>
-  <entry>vmrdr</entry>
-</row>
-
-</tbody></tgroup></informaltable>
-
-</para><para>
-
-This document covers installation for the
-<emphasis>&arch-title;</emphasis> architecture.  If you are looking
-for information on any of the other Debian-supported architectures
-take a look at the
-<ulink url="http://www.debian.org/ports/">Debian-Ports</ulink> pages.
-
-</para><para condition="new-arch">
-
-This is the first official release of &debian; for the &arch-title;
-architecture.  We feel that it has proven itself sufficiently to be
-released. However, because it has not had the exposure (and hence
-testing by users) that some other architectures have had, you may
-encounter a few bugs. Use our
-<ulink url="&url-bts;">Bug Tracking System</ulink> to report any 
-problems; make sure to mention the fact that the bug is on the
-&arch-title; platform. It can be necessary to use the 
-<ulink url="&url-list-subscribe;">debian-&architecture; mailing list</ulink>
-as well.
-  
-</para>
-
-  </sect2>
-
-<!-- supported cpu docs -->
-&supported-alpha.xml;
-&supported-arm.xml;
-&supported-hppa.xml;
-&supported-i386.xml;
-&supported-ia64.xml;  <!-- FIXME: currently missing -->
-&supported-m68k.xml;
-&supported-mips.xml;
-&supported-mipsel.xml;
-&supported-powerpc.xml;
-&supported-s390.xml;
-&supported-sparc.xml;
-
-  <sect2 id="gfx" arch="not-s390"><title>Graphics Card</title>
-
-<para arch="x86">
-
-You should be using a VGA-compatible display interface for the console
-terminal. Nearly every modern display card is compatible with
-VGA. Ancient standards such CGA, MDA, or HGA should also work,
-assuming you do not require X11 support.  Note that X11 is not used
-during the installation process described in this document.
-
-</para><para>
-
-Debian's support for graphical interfaces is determined by the
-underlying support found in XFree86's X11 system.  The newer AGP video
-slots are actually a modification on the PCI specification, and most
-AGP video cards work under XFree86.  Details on supported graphics
-buses, cards, monitors, and pointing devices can be found at 
-<ulink url="&url-xfree86;"></ulink>.  Debian &release; ships 
-with XFree86 version &x11ver;.
-
-</para><para arch="mips">
-
-The XFree86 X11 window system is only supported on the SGI Indy.  The
-Broadcom BCM1250 evaluation board has standard 3.3v PCI slots and supports
-VGA emulation or Linux framebuffer on a selected range of graphics cards.
-A <ulink url="&url-bcm91250a-hardware;">compatibility listing</ulink> for
-the BCM1250 is available.
-
-</para><para arch="mipsel">
-
-The XFree86 X11 window system is supported on some DECstation models.  The
-Broadcom BCM1250 evaluation board has standard 3.3v PCI slots and supports
-VGA emulation or Linux framebuffer on a selected range of graphics cards.
-A <ulink url="&url-bcm91250a-hardware;">compatibility listing</ulink> for
-the BCM1250 is available.
-
-</para>
-
-  </sect2>
-
-  <sect2 arch="x86" id="laptops"><title>Laptops</title>
-<para>
-
-Laptops are also supported.  Laptops are often specialized or contain
-proprietary hardware.  To see if your particular laptop works well
-with GNU/Linux, see the 
-<ulink url="&url-x86-laptop;">Linux Laptop pages</ulink>
-
-</para>
-   </sect2>
-
-
-  <sect2 condition="defaults-smp">
-<title>Multiple Processors</title>
-
-<para>
-
-Multi-processor support &mdash; also called ``symmetric multi-processing''
-or SMP &mdash; is supported for this architecture.  The standard Debian
-&release; kernel image was compiled with SMP support.  This should not
-prevent installation, since the SMP kernel should boot on non-SMP systems;
-the kernel will simply cause a bit more overhead.
-
-</para><para>
-
-In order to optimize the kernel for single CPU systems, you'll have to
-replace the standard Debian kernel.  You can find a discussion of how
-to do this in <xref linkend="kernel-baking"/>.  At this time
-(kernel version &kernelversion;) the way you disable SMP is to deselect
-``symmetric multi-processing'' in the ``General'' section of the
-kernel config.
-
-</para>
-
-  </sect2>
-
-
-  <sect2 condition="supports-smp">
- <title>Multiple Processors</title>
-<para>
-
-Multi-processor support &mdash; also called ``symmetric
-multi-processing'' or SMP &mdash; is supported for this architecture.
-However, the standard Debian &release; kernel image does not support
-SMP.  This should not prevent installation, since the standard,
-non-SMP kernel should boot on SMP systems; the kernel will simply use
-the first CPU.
-
-</para><para>
-
-In order to take advantage of multiple processors, you'll have to
-replace the standard Debian kernel.  You can find a discussion of how
-to do this in <xref linkend="kernel-baking"/>.  At this time
-(kernel version &kernelversion;) the way you enable SMP is to select
-``symmetric multi-processing'' in the ``General'' section of the
-kernel config.
-
-</para>
-  </sect2>
-  
-  <sect2 condition="supports-smp-sometimes">
- <title>Multiple Processors</title>
-<para>
-
-Multi-processor support &mdash; also called ``symmetric
-multi-processing'' or SMP &mdash; is supported for this architecture,
-and is supported by a precompiled Debian kernel image. Depending on your
-install media, this SMP-capable kernel may or may not be installed by
-default. This should not prevent installation, since the standard,
-non-SMP kernel should boot on SMP systems; the kernel will simply use
-the first CPU.
-
-</para><para>
-
-In order to take advantage of multiple processors, you should check to see
-if a kernel package that supports SMP is installed, and if not, choose an
-appropriate kernel package.
-
-You can also build your own customised kernel to support SMP. You can find
-a discussion of how to do this in <xref linkend="kernel-baking"/>.  At this
-time (kernel version &kernelversion;) the way you enable SMP is to select
-``symmetric multi-processing'' in the ``General'' section of the
-kernel config.
-
-</para>
-  </sect2>
- </sect1>
diff --git a/da/hardware/hardware.xml b/da/hardware/hardware.xml
deleted file mode 100644
index 798fe2cad..000000000
--- a/da/hardware/hardware.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 56244 untranslated -->
-
-<chapter id="hardware-req">
- <title>System Requirements</title>
-
-<para>
-
-This section contains information about what hardware you need to get
-started with Debian.  You will also find links to further information
-about hardware supported by GNU and Linux.
-
-</para>
-
-&hardware-supported.xml;
-&installation-media.xml;
-&supported-peripherals.xml;
-&memory-disk-requirements.xml;
-&network-cards.xml;
-
-</chapter>
diff --git a/da/hardware/installation-media.xml b/da/hardware/installation-media.xml
deleted file mode 100644
index 05aca1ccd..000000000
--- a/da/hardware/installation-media.xml
+++ /dev/null
@@ -1,317 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22229 untranslated -->
-
- <sect1 id="installation-media">
- <title>Installation Media</title>
-
-<para>
-
-This section will help you determine which different media types you can use to
-install Debian. For example, if you have a floppy disk drive on your machine, 
-it can be used to install Debian. There is a whole chapter devoted media,
-<xref linkend="install-methods"/>, which lists the advantages and
-disadvantages of each media type. You may want to refer back to this page once
-you reach that section.
-
-</para>
-
-  <sect2 condition="supports-floppy-boot"><title>Floppies</title>
-<para>
-
-In some cases, you'll have to do your first boot from floppy disks.
-Generally, all you will need is a
-high-density (1440 kilobytes) 3.5 inch floppy drive.
-
-</para><para arch="powerpc">
-
-For CHRP, floppy support is currently broken.
-
-</para>
-  </sect2>
-
-  <sect2><title>CD-ROM/DVD-ROM</title>
-
-<note><para>
-
-Whenever you see <quote>CD-ROM</quote> in this manual, it applies to both
-CD-ROMs and DVD-ROMs, because both technologies are really
-the same from the operating system's point of view, except for some very
-old nonstandard CD-ROM drives which are neither SCSI nor IDE/ATAPI.
-
-</para></note><para>
-
-CD-ROM based installation is supported for some architectures.
-On machines which support bootable CD-ROMs, you should be able to do a
-completely
-<phrase arch="not-s390">floppy-less</phrase>
-<phrase arch="s390">tape-less</phrase>
-installation.  Even if your system doesn't
-support booting from a CD-ROM, you can use the CD-ROM in conjunction
-with the other techniques to install your system, once you've booted
-up by other means; see <xref linkend="boot-installer"/>.
-
-</para><para arch="x86"> 
-
-Both SCSI and IDE/ATAPI CD-ROMs are supported.  In addition, all
-non-standard CD interfaces supported by Linux are supported by the
-boot disks (such as Mitsumi and Matsushita drives).  However, these
-models might require special boot parameters or other massaging to get
-them to work, and booting off these non-standard interfaces is
-unlikely.  The <ulink url="&url-cd-howto;">Linux CD-ROM HOWTO</ulink>
-contains in-depth information on using CD-ROMs with Linux.
-
-</para><para arch="x86"> 
-
-USB CD-ROM drives are also supported, as are FireWire devices that
-are supported by the ohci1394 and sbp2 drivers.
-
-</para><para arch="arm"> 
-
-IDE/ATAPI CD-ROMs are supported on all ARM machines.
-On RiscPCs, SCSI CD-ROMs are also supported. 
-
-</para><para arch="mips">
-
-On SGI machines, it is possible to boot from CD and images are provided.
-To start the install, simply choose the <quote>System installation</quote>
-entry in the firmware.  The Broadcom BCM1250 supports standard IDE devices,
-including CD-ROM drives, but CD images for this platform are currently not
-provided because the firmware doesn't recognize CD drives.
-
-</para><para arch="mipsel"> 
-
-On DECstations, booting from CD-ROM requires a SCSI CD-ROM drive
-capable of working with a logical blocksize of 512 bytes. Many of the
-SCSI CD-DROM drives sold for the PC market do not have this
-capability. If your CD-ROM drive has a jumper labeled "Unix/PC" or
-"512/2048", place it in the "Unix" or "512" position.
-
-</para><para arch="mipsel">
-
-CD 1 contains the installer for the r3k-kn02 subarchitecture
-(the R3000-based DECstations 5000/1xx and 5000/240 as well as
-the R3000-based Personal DECstation models), CD 2 the
-installer for the r4k-kn04 subarchitecture (the R4x00-based
-DECstations 5000/150 and 5000/260 as well as the Personal DECstation
-5000/50).
-
-</para><para arch="mipsel">
-
-To boot from CD, issue the command <userinput>boot
-<replaceable>#</replaceable>/rz<replaceable>id</replaceable></userinput>
-on the firmware prompt, where <replaceable>#</replaceable> is the
-number of the TurboChannel device from which to boot (3 on most
-DECstations) and <replaceable>id</replaceable> is the SCSI ID of the
-CD-ROM drive.  If you need to pass additional parameters, they can
-optionally be appended with the following syntax:
-
-</para><para arch="mipsel">
-
-<userinput>boot
-<replaceable>#</replaceable>/rz<replaceable>id</replaceable>
-param1=value1 param2=value2 ...</userinput>
-
-</para>
-  </sect2>
-
-  <sect2><title>Hard Disk</title>
-
-<para>
-
-Booting the installation system directly from a hard disk is another option
-for many architectures. This will require some other operating system
-to load the installer onto the hard disk.
-
-</para><para arch="m68k">
-
-In fact, installation from your local disk is the preferred
-installation technique for most &architecture; machines.
-
-</para><para arch="sparc">
-
-Although the &arch-title; does not allow booting from SunOS 
-(Solaris), you can install from a SunOS partiton (UFS slices).
-
-</para>
-  </sect2>
-
-  <sect2 condition="bootable-usb"><title>USB Memory Stick</title>
-
-<para>
-
-Many Debian boxes need their floppy and/or CD-ROM drives only for
-setting up the system and for rescue purposes. If you operate some
-servers, you will probably already have thought about omitting those
-drives and using an USB memory stick for installing and (when
-necessary) for recovering the system. This is also useful for small
-systems which have no room for unnecessary drives.
-
-</para>
-  </sect2>
-
-  <sect2><title>Network</title>
-
-<para condition="supports-tftp">
-
-You can also <emphasis>boot</emphasis> your system over the network.
-<phrase arch="mips">This is the preferred installation technique for
-Mips.</phrase>
-
-</para><para condition="supports-nfsroot">
-
-Diskless installation, using network booting from a local area network
-and NFS-mounting of all local filesystems, is another option.
-
-</para><para>
-
-After the operating system kernel is installed, you can install the
-rest of your system via any sort of network connection (including
-PPP after installation of the base system), via FTP or HTTP.
-
-</para>
-  </sect2>
-
-  <sect2><title>Un*x or GNU system</title>
-
-<para>
-
-If you are running other Unix-like system, you could use it to install
-&debian; without using the &d-i; described in the rest of the
-manual. This kind of install may be useful for users with otherwise
-unsupported hardware or on hosts which can't afford downtimes.  If you
-are interested in this technique, skip to the <xref
-linkend="linux-upgrade"/>.
-
-</para>
-  </sect2>
-
-  <sect2><title>Supported Storage Systems</title>
-
-<para>
-
-The Debian boot disks contain a kernel which is built to maximize the
-number of systems it runs on.  Unfortunately, this makes for a larger
-kernel, which includes many drivers that won't be used for your
-machine (see <xref linkend="kernel-baking"/> to learn how to
-build your own kernel).  Support for the widest possible range of
-devices is desirable in general, to ensure that Debian can be
-installed on the widest array of hardware.
-
-</para><para arch="x86">
-
-Generally, the Debian installation system includes support for floppies,
-IDE drives, IDE floppies, parallel port IDE devices, SCSI controllers and
-drives, USB, and FireWire.  The file systems supported include FAT,
-Win-32 FAT extensions (VFAT), and NTFS, among others.
-
-</para><para arch="x86">
-
-The disk interfaces that emulate the ``AT'' hard disk interface which
-are often called MFM, RLL, IDE, or ATA are supported.  Very old 8 bit
-hard disk controllers used in the IBM XT computer are supported only
-as a module. SCSI disk controllers from many different manufacturers
-are supported. See the 
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink> 
-for more details.
-
-</para><para arch="m68k">
-
-Pretty much all storage systems supported by the Linux kernel are
-supported by the Debian installation system.  Note that the current
-Linux kernel does not support floppies on the Macintosh at all, and
-the Debian installation system doesn't support floppies for Amigas.
-Also supported on the Atari is the Macintosh HFS system, and AFFS as a
-module.  Macs support the Atari (FAT) file system.  Amigas support the
-FAT file system, and HFS as a module.
-
-</para><para arch="sparc"> 
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system. The following SCSI drivers are supported in the default
-kernel:
-
-<itemizedlist>
-<listitem><para>
-
-Sparc ESP
-
-</para></listitem>
-<listitem><para>
-
-PTI Qlogic,ISP
-
-</para></listitem>
-<listitem><para>
-
-Adaptec AIC7xxx
-
-</para></listitem>
-<listitem><para>
-
-NCR and Symbios 53C8XX
-
-</para></listitem>
-</itemizedlist>
-
-IDE systems (such as the UltraSPARC 5) are also supported. See 
-<ulink url="&url-sparc-linux-faq;">Linux for SPARC Processors FAQ</ulink> 
-for more information on SPARC hardware supported by the Linux kernel.
-
-</para><para arch="alpha">
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system.  The following SCSI drivers are supported in the default
-kernel:
-
-<itemizedlist>
-<listitem><para>
-
-Qlogic ISP
-
-</para></listitem>
-<listitem><para>
-
-NCR and Symbios 53c8xx
-
-</para></listitem>
-<listitem><para>
-
-Adaptec AIC7xxx
-
-</para></listitem>
-</itemizedlist>
-
-IDE disks are also supported.  Note, however, that on many systems,
-the SRM console is unable to boot from IDE drives, and the Jensen is
-unable to boot from floppies.  (see 
-<ulink url="&url-jensen-howto;"></ulink> 
-for more information on booting the Jensen)
-
-</para><para arch="powerpc"> 
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system.  Note that the current Linux kernel does not support
-floppies on CHRP systems at all. 
-
-</para><para arch="hppa">
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system.  Note that the current Linux kernel does not support
-the floppy drive.
-
-</para><para arch="mips">
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system.
-
-</para><para arch="s390">
-
-Any storage system supported by the Linux kernel is also supported by
-the boot system.  This means that FBA and ECKD DASDs are supported with
-the old Linux disk layout (ldl) and the new common S/390 disk layout (cdl).
-
-</para>
-
-  </sect2>
-
- </sect1>
diff --git a/da/hardware/memory-disk-requirements.xml b/da/hardware/memory-disk-requirements.xml
deleted file mode 100644
index 6bb18618e..000000000
--- a/da/hardware/memory-disk-requirements.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 19285 untranslated -->
-
- <sect1 id="memory-disk-requirements">
- <title>Memory and Disk Space Requirements</title>
-
-<para>
-
-You must have at least &minimum-memory; of memory and &minimum-fs-size; of hard disk
-space. For a minimal console-based system (all standard packages),
-250MB is required. If you want to install a reasonable amount of
-software, including the X Window System, and some development programs
-and libraries, you'll need at least 400MB. For a more or less complete
-desktop system, you'll need a few gigabytes.
-
-</para><para arch="m68k"> 
-
-On the Amiga the size of FastRAM is relevant towards the total memory
-requirements.  Also, using Zorro cards with 16-bit RAM is not
-supported; you'll need 32-bit RAM.  The <command>amiboot</command>
-program can be used to disable 16-bit RAM; see the 
-<ulink url="&url-m68k-faq;">Linux/m68k FAQ</ulink>.  Recent kernels should
-disable 16-bit RAM automatically.
-
-</para><para arch="m68k">
-
-On the Atari, both ST-RAM and Fast RAM (TT-RAM) are used by Linux.
-Many users have reported problems running the kernel itself in Fast
-RAM, so the Atari bootstrap will place the kernel in ST-RAM. The
-minimum requirement for ST-RAM is 2 MB. You will need an additional
-12 MB or more of TT-RAM.
-
-</para><para arch="m68k">
-
-On the Macintosh, care should be taken on machines with RAM-based
-video (RBV). The RAM segment at physical address 0 is used as screen
-memory, making the default load position for the kernel unavailable.
-The alternate RAM segment used for kernel and RAMdisk must be at least
-4 MB.
-
-</para><para arch="m68k">
-
-<emphasis condition="FIXME">FIXME: is this still true?</emphasis>
-
-</para>
-
- </sect1>
diff --git a/da/hardware/network-cards.xml b/da/hardware/network-cards.xml
deleted file mode 100644
index c98b29234..000000000
--- a/da/hardware/network-cards.xml
+++ /dev/null
@@ -1,214 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 18613 untranslated -->
-
- <sect1 id="network-cards">
- <title>Network Connectivity Hardware</title>
-
-<para arch="x86">
-
-<!-- last updated for kernel-image_2.0.36-2 -->
-
-Most PCI and many older ISA network cards are supported.
-Some network interface cards are not supported by most Debian
-installation disks, such as AX.25 cards and protocols; 
-NI16510 EtherBlaster cards; Schneider &amp; Koch G16 cards;
-and the Zenith Z-Note built-in network card. Microchannel (MCA) network
-cards are not supported by the standard installation system, but see 
-<ulink url="&url-linux-mca;">Linux on MCA</ulink> for some (old)
-instructions, and the 
-<ulink url="&url-linux-mca-discussion;">Linux MCA discussion archives</ulink>.
-FDDI networks are also not supported by the installation disks, both
-cards and protocols. 
-
-<!-- missing-doc FIXME You can create a custom kernel which supports an
-otherwise unsupported card and then substitute in the installer (see
-<xref linkend="rescue-replace-kernel"/>). -->
-
-</para><para arch="x86">
-
-As for ISDN, the D-channel protocol for the (old) German 1TR6 is not 
-supported; Spellcaster BRI ISDN boards are also not supported by the
-&d-i;.
-
-</para>
-
-<para arch="m68k">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.  Again, see 
-<ulink url="&url-m68k-faq;"></ulink> for complete details. 
-
-</para>
-
-<para arch="sparc">
-
-The following network interface cards (NICs) are supported from the bootable
-kernel directly:
-
-<itemizedlist>
- <listitem><para>
-
-Sun LANCE
- 
-
-</para></listitem>
- <listitem><para>
-
-Sun Happy Meal
- 
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="sparc">
-
-The following network interface cards are supported as modules.  They
-can be enabled once the drivers are installed during the setup.
-However, due to the magic of OpenPROM, you still should be able to
-boot from these devices:
-
-<itemizedlist>
- <listitem><para>
-
-Sun BigMAC
- 
-
-</para></listitem>
- <listitem><para>
-
-Sun QuadEthernet
-
-</para></listitem>
- <listitem><para>
-
-MyriCOM Gigabit Ethernet
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="alpha">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  Support for the built-in DECChip
-(Tulip) Ethernet on many Alpha models is compiled directly into the
-kernel. For other cards, you may need to load your network driver as a
-module.
-
-</para><para arch="powerpc"> 
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="hppa">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="mips">
-
-Any network interface card (NIC) supported by the Linux kernel should
-also be supported by the boot disks.  You may need to load your
-network driver as a module.
-
-</para><para arch="mipsel">
-
-Due to kernel limitations only the onboard network interfaces on
-DECstations are supported, TurboChannel option network cards currently
-do not work.
-
-</para><para arch="s390">
-
-Any network interface card (NIC) supported by the Linux kernel are
-also be supported by the boot disks.  All network drivers are compiled
-as modules so you need to load one first during the initial network
-setup. The list of supported network devices is:
-
-<itemizedlist>
- <listitem><para>
-
-Channel to Channel (CTC) or ESCON connection (real or emulated)
- 
-
-</para></listitem>
- <listitem><para>
-
-lcs: OSA-2 Token Ring/Ethernet or OSA-Express Fast Ethernet
-          (non-QDIO)
-
-</para></listitem>
-<listitem><para>
-
-Inter-User Communication Vehicle (IUCV) - available for VM
-          guests only
-
-</para></listitem>
-<listitem><para>
-
-qeth: OSA-Express in QDIO mode / HiperSockets
-
-</para></listitem>
-</itemizedlist>
-
-</para>
-
-<para arch="arm">
-
-The following network interface cards are supported directly by the
-boot disks on NetWinder and CATS machines:
-
-<itemizedlist>
- <listitem><para>
-
-    PCI-based NE2000
- 
-
-</para></listitem>
- <listitem><para>
-
-    DECchip Tulip
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="arm">
-
-The following network interface cards are supported directly by the
-boot disks on RiscPCs:
-
-<itemizedlist>
- <listitem><para>
-
-    Ether1
-
-</para></listitem>
- <listitem><para>
-
-    Ether3
-
-</para></listitem>
- <listitem><para>
-
-    EtherH
-
-</para></listitem>
-</itemizedlist>
-
-</para><para arch="arm">
-
-If your card is mentioned in the lists above, the complete installation
-can be carried out from the network with no need for CD-ROMs or floppy 
-disks.
-
-</para><para arch="arm">
-
-Any other network interface card (NIC) supported by the Linux kernel
-should also be supported by the boot disks.  You may need to load your
-network driver as a module; this means that you will have to install
-the operating system kernel and modules using some other media.  
-
-</para>
-
- </sect1>
diff --git a/da/hardware/supported-peripherals.xml b/da/hardware/supported-peripherals.xml
deleted file mode 100644
index 35fe2ccb6..000000000
--- a/da/hardware/supported-peripherals.xml
+++ /dev/null
@@ -1,186 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22225 untranslated -->
-
- <sect1 id="supported-peripherals">
- <title>Peripherals and Other Hardware</title>
-<para>
-
-Linux supports a large variety of hardware devices such as mice,
-printers, scanners, PCMCIA and USB devices.  However, most of these
-devices are not required while installing the system.
-
-</para><para arch="x86">
-
-USB hardware generally works fine, only some
-USB keyboards may require additional configuration 
-(see <xref linkend="usb-keyboard-config"/>).
-
-</para><para arch="x86">
-
-Again, see the 
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>
-to determine whether your specific hardware is supported by Linux.
-
-</para><para arch="s390">
-
-Package installations from XPRAM and tape are not supported by this
-system.  All packages that you want to install need to be available on a
-DASD or over the network using NFS, HTTP or FTP.
-
-</para><para arch="mips">
-
-The Broadcom BCM1250 evaluation board offers standard 3.3v 32 bit and 64
-bit PCI slots as well as USB connectors.
-
-</para><para arch="mipsel">
-
-The Broadcom BCM1250 evaluation board offers standard 3.3v 32 bit and 64
-bit PCI slots as well as USB connectors.  The Cobalt RaQ has no support for
-additional devices but the Qube has one PCI slot.
-
-</para>
-</sect1>
-
- <sect1 arch="not-s390"><title>Purchasing Hardware Specifically for GNU/Linux</title>
-
-<para>
-
-There are several vendors, who ship systems with Debian or other
-distributions of GNU/Linux 
-<ulink url="&url-pre-installed;">pre-installed</ulink>. You might pay more
-for the privilege, but it does buy a level of peace of mind, since you can
-be sure that the hardware is well-supported by GNU/Linux.  
-
-</para><para arch="m68k"> 
-
-Unfortunately, it's quite rare to find any vendor shipping
-new &arch-title; machines at all. 
-
-</para><para arch="x86"> 
-
-If you do have to buy a machine with Windows bundled, carefully read
-the software license that comes with Windows; you may be able to
-reject the license and obtain a rebate from your vendor.  See 
-<ulink url="&url-windows-refund;"></ulink> for complete details.
-
-</para><para>
-
-Whether or not you are purchasing a system with Linux bundled, or even
-a used system, it is still important to check that your hardware is
-supported by the Linux kernel.  Check if your hardware is listed in
-the references found above.  Let your salesperson (if any) know that
-you're shopping for a Linux system.  Support Linux-friendly hardware
-vendors.
-
-</para>
-
-  <sect2><title>Avoid Proprietary or Closed Hardware</title>
-<para>
-
-Some hardware manufacturers simply won't tell us how to write drivers
-for their hardware. Others won't allow us access to the documentation
-without a non-disclosure agreement that would prevent us from
-releasing the Linux source code.
-
-</para><para arch="m68k"> 
-
-Another example is the proprietary hardware in the older
-Macintosh line. In fact, no specifications or documentation have ever
-been released for any Macintosh hardware, most notably the ADB
-controller (used by the mouse and keyboard), the floppy controller,
-and all acceleration and CLUT manipulation of the video hardware
-(though we do now support CLUT manipulation on nearly all internal
-video chips).  In a nutshell, this explains why the Macintosh Linux
-port lags behind other Linux ports.
-
-</para><para>
-
-Since we haven't been granted access to the documentation on these
-devices, they simply won't work under Linux. You can help by asking
-the manufacturers of such hardware to release the documentation. If
-enough people ask, they will realize that the free software community
-is an important market.
-
-</para>
-</sect2>
-
-
-  <sect2 arch="x86"><title>Windows-specific Hardware</title>
-<para>
-
-A disturbing trend is the proliferation of Windows-specific modems and
-printers. In some cases these are specially designed to be operated by
-the Microsoft Windows operating system and bear the legend
-``WinModem'' or ``Made especially for Windows-based computers''. This
-is generally done by removing the embedded processors of the hardware
-and shifting the work they do over to a Windows driver that is run by
-your computer's main CPU. This strategy makes the hardware less
-expensive, but the savings are often <emphasis>not</emphasis> passed on to the
-user and this hardware may even be more expensive than equivalent
-devices that retain their embedded intelligence.
-
-</para><para>
-
-You should avoid Windows-specific hardware for two reasons. The first
-is that the manufacturers do not generally make the resources
-available to write a Linux driver. Generally, the hardware and
-software interface to the device is proprietary, and documentation is
-not available without a non-disclosure agreement, if it is available
-at all. This precludes its being used for free software, since free
-software writers disclose the source code of their programs. The
-second reason is that when devices like these have had their embedded
-processors removed, the operating system must perform the work of the
-embedded processors, often at <emphasis>real-time</emphasis> priority,
-and thus the CPU is not available to run your programs while it is
-driving these devices. Since the typical Windows user does not
-multi-process as intensively as a Linux user, the manufacturers hope
-that the Windows user simply won't notice the burden this hardware
-places on their CPU.  However, any multi-processing operating system,
-even Windows 2000 or XP, suffers from degraded performance when
-peripheral manufacturers skimp on the embedded processing power of
-their hardware.
-
-</para><para>
-
-You can help this situation by encouraging these manufacturers to
-release the documentation and other resources necessary for us to
-program their hardware, but the best strategy is simply to avoid this
-sort of hardware until it is listed as working in the 
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>.
-
-</para>
-</sect2>
-
-
-  <sect2 id="Parity-RAM">
-  <title>Fake or <quote>Virtual</quote> Parity RAM</title>
-<para>
-
-If you ask for Parity RAM in a computer store, you'll probably get
-<emphasis>virtual parity</emphasis> memory modules instead of
-<emphasis>true parity</emphasis> ones. Virtual parity SIMMs can often
-(but not always) be distinguished because they only have one more chip
-than an equivalent non-parity SIMM, and that one extra chip is smaller
-than all the others. Virtual-parity SIMMs work exactly like non-parity
-memory.  They can't tell you when you have a single-bit RAM error the
-way true-parity SIMMs do in a motherboard that implements
-parity. Don't ever pay more for a virtual-parity SIMM than a
-non-parity one. Do expect to pay a little more for true-parity SIMMs,
-because you are actually buying one extra bit of memory for every 8
-bits.
-
-</para><para>
-
-If you want complete information on &arch-title; RAM issues, and what
-is the best RAM to buy, see the 
-<ulink url="&url-pc-hw-faq;">PC Hardware FAQ</ulink>.
-
-</para><para arch="alpha"> 
-
-Most, if not all, Alpha systems require true-parity RAM. 
-
-</para>
-
-  </sect2>
-
- </sect1>
diff --git a/da/hardware/supported/alpha.xml b/da/hardware/supported/alpha.xml
deleted file mode 100644
index 816c89c8b..000000000
--- a/da/hardware/supported/alpha.xml
+++ /dev/null
@@ -1,432 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-
-  <sect2 arch="alpha" id="alpha-cpus"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Complete information regarding supported DEC Alphas can be found at
-<ulink url="&url-alpha-howto;">Linux Alpha HOWTO</ulink>.  The
-purpose of this section is to describe the systems supported
-by the boot disks.
-
-</para><para>
-
-Alpha machines are subdivided into different system types because there
-are a number of generations of motherboard and supporting chip-sets.
-Different systems (``sub-architectures'') often have radically different
-engineering and capabilities.  Therefore, the process of installing and,
-more to the point, booting, can vary from system to system.
-
-</para><para>
-
-The following table lists the system types supported by the Debian
-installation system.  The table also indicates the <emphasis>code
-name</emphasis> for these system types.  You'll need to know this code
-name when you actually begin the installation process:
-
-</para>
-
-<informaltable>
-<tgroup cols="4">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<colspec colname="c3"/>
-<colspec colname="c4"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Hardware Type</entry>
-  <entry>Aliases</entry><entry>MILO image</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="3">ALCOR</entry>
-  <entry>AlphaStation 500 5/266.300</entry>
-  <entry>Maverick</entry>
-  <entry>alcor</entry>
-</row><row>
-  <entry>AlphaStation 500 5/333...500</entry>
-  <entry>Bret</entry>
-  <entry>alcor</entry>
-</row><row>
-  <entry>AlphaStation 600/266...300</entry>
-  <entry>Alcor</entry>
-  <entry>alcor</entry>
-</row><row>
-  <entry>AlphaStation 600/300...433</entry>
-  <entry>XLT</entry>
-  <entry>xlt</entry>
-</row>
-
-<row>
-  <entry>BOOK1</entry>
-  <entry>AlphaBook1 (laptop)</entry>
-  <entry>Alphabook1/Burns</entry>
-  <entry>book1</entry>
-</row>
-
-<row>
-  <entry morerows="7">AVANTI</entry>
-  <entry>AlphaStation 200 4/100...166</entry>
-  <entry>Mustang</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 200 4/233</entry>
-  <entry>Mustang+</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 205 4/133...333</entry>
-  <entry>LX3</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 250 4/300</entry>
-  <entry>M3+</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 255 4/133...333</entry>
-  <entry>LX3+</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 300 4/266</entry>
-  <entry>Melmac</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 400 4/166</entry>
-  <entry>Chinet</entry>
-  <entry>avanti</entry>
-</row><row>
-  <entry>AlphaStation 400 4/233...300</entry>
-  <entry>Avanti</entry>
-  <entry>avanti</entry>
-</row>
-
-<row>
-  <entry morerows="3">EB164</entry>
-  <entry>AlphaPC164</entry>
-  <entry>PC164</entry>
-  <entry>pc164</entry>
-</row><row>
-  <entry>AlphaPC164-LX</entry>
-  <entry>LX164</entry>
-  <entry>lx164</entry>
-</row><row>
-  <entry>AlphaPC164-SX</entry>
-  <entry>SX164</entry>
-  <entry>sx164</entry>
-</row><row>
-  <entry>EB164</entry>
-  <entry>EB164</entry>
-  <entry>eb164</entry>
-</row>
-
-<row>
-  <entry morerows="2">EB64+</entry>
-  <entry>AlphaPC64</entry>
-  <entry>Cabriolet</entry>
-  <entry>cabriolet</entry>
-</row><row>
-  <entry>AlphaPCI64</entry>
-  <entry>Cabriolet</entry>
-  <entry>cabriolet</entry>
-</row><row>
-  <entry>EB64+</entry>
-  <entry>EB64+</entry>
-  <entry>eb64p</entry>
-</row>
-
-<row>
-  <entry morerows="1">EB66</entry>
-  <entry>EB66</entry>
-  <entry>EB66</entry>
-  <entry>eb66</entry>
-</row><row>
-  <entry>EB66+</entry>
-  <entry>EB66+</entry>
-  <entry>eb66p</entry>
-</row>
-
-<row>
-  <entry morerows="2">JENSEN</entry>
-  <entry>DEC 2000 Model 300(S)</entry>
-  <entry>Jensen</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>DEC 2000 Model 500</entry>
-  <entry>Culzen</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>DECpc 150</entry>
-  <entry>Jensen</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry morerows="7">MIATA</entry>
-  <entry>Personal WorkStation 433a</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 433au</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 466au</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 500a</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 500au</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 550au</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 600a</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row><row>
-  <entry>Personal WorkStation 600au</entry>
-  <entry>Miata</entry>
-  <entry>miata</entry>
-</row>
-
-<row>
-  <entry morerows="3">MIKASA</entry>
-  <entry>AlphaServer 1000 4/200</entry>
-  <entry>Mikasa</entry>
-  <entry>mikasa</entry>
-</row><row>
-  <entry>AlphaServer 1000 4/233..266</entry>
-  <entry>Mikasa+</entry>
-  <entry>mikasa</entry>
-</row><row>
-  <entry>AlphaServer 1000 5/300</entry>
-  <entry>Mikasa-Pinnacle</entry>
-  <entry>mikasa</entry>
-</row><row>
-  <entry>AlphaServer 1000 5/300</entry>
-  <entry>Mikasa-Primo</entry>
-  <entry>mikasa</entry>
-</row>
-
-<row>
-  <entry morerows="1">NAUTILUS</entry>
-  <entry>UP1000</entry>
-  <entry>Nautilus</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>UP1100</entry>
-  <entry>Galaxy-Train/Nautilus Jr.</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry morerows="1">NONAME</entry>
-  <entry>AXPpci33</entry>
-  <entry>Noname</entry>
-  <entry>noname</entry>
-</row><row>
-  <entry>UDB</entry>
-  <entry>Multia</entry>
-  <entry>noname</entry>
-</row>
-
-<row>
-  <entry morerows="6">NORITAKE</entry>
-  <entry>AlphaServer 1000A 4/233...266</entry>
-  <entry>Noritake</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 1000A 5/300</entry>
-  <entry>Noritake-Pinnacle</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 1000A 5/333...500</entry>
-  <entry>Noritake-Primo</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 800 5/333...500</entry>
-  <entry>Corelle</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaStation 600 A</entry>
-  <entry>Alcor-Primo</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>Digital Server 3300</entry>
-  <entry>Corelle</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>Digital Server 3300R</entry>
-  <entry>Corelle</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry>PLATFORM 2000</entry>
-  <entry>P2K</entry>
-  <entry>P2K</entry>
-  <entry>p2k</entry>
-</row>
-
-<row>
-  <entry morerows="4">RAWHIDE</entry>
-  <entry>AlphaServer 1200 5/xxx</entry>
-  <entry>Tincup/DaVinci</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 4000 5/xxx</entry>
-  <entry>Wrangler/Durango</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 4100 5/xxx</entry>
-  <entry>Dodge</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>Digital Server 5300</entry>
-  <entry>Tincup/DaVinci</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>Digital Server 7300</entry>
-  <entry>Dodge</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry morerows="5">RUFFIAN</entry>
-  <entry>DeskStation AlphaPC164-UX</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row><row>
-  <entry>DeskStation RPL164-2</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row><row>
-  <entry>DeskStation RPL164-4</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row><row>
-  <entry>DeskStation RPX164-2</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row><row>
-  <entry>DeskStation RPX164-4</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row><row>
-  <entry>Samsung AlphaPC164-BX</entry>
-  <entry>Ruffian</entry>
-  <entry>ruffian</entry>
-</row>
-
-<row>
-  <entry morerows="3">SABLE</entry>
-  <entry>AlphaServer 2000 4/xxx</entry>
-  <entry>Demi-Sable</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 2000 5/xxx</entry>
-  <entry>Demi-Gamma-Sable</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 2100 4/xxx</entry>
-  <entry>Sable</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer 2100 5/xxx</entry>
-  <entry>Gamma-Sable</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry>TAKARA</entry>
-  <entry>21164 PICMG SBC</entry>
-  <entry>Takara</entry>
-  <entry>takara</entry>
-</row>
-
-<row>
-  <entry morerows="1">TITAN</entry>
-  <entry>AlphaServer ES45</entry>
-  <entry>Privateer</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>UNKNOWN</entry>
-  <entry>Yukon</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry morerows="10">TSUNAMI</entry>
-  <entry>AlphaServer DS10</entry>
-  <entry>Webbrick</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer DS20</entry>
-  <entry>Catamaran/Goldrush</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer DS20E</entry>
-  <entry>Goldrack</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer ES40</entry>
-  <entry>Clipper</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>DP264</entry>
-  <entry>DP264</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>SMARTengine 21264 PCI/ISA SBC</entry>
-  <entry>Eiger</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>UNKNOWN</entry>
-  <entry>Warhol</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>UNKNOWN</entry>
-  <entry>Windjammer</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>UP2000</entry>
-  <entry>Swordfish</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>XP1000</entry>
-  <entry>Monet/Brisbane</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>XP900</entry>
-  <entry>Webbrick</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry morerows="1">WILDFIRE</entry>
-  <entry>AlphaServer GS160</entry>
-  <entry>Wildfire</entry>
-  <entry>N/A</entry>
-</row><row>
-  <entry>AlphaServer GS320</entry>
-  <entry>Wildfire</entry>
-  <entry>N/A</entry>
-</row>
-
-<row>
-  <entry>XL</entry>
-  <entry>XL-233...266</entry>
-  <entry>XL</entry>
-  <entry>xl</entry>
-</row>
-
-</tbody></tgroup></informaltable>
-  </sect2>
diff --git a/da/hardware/supported/arm.xml b/da/hardware/supported/arm.xml
deleted file mode 100644
index 2c330b5bc..000000000
--- a/da/hardware/supported/arm.xml
+++ /dev/null
@@ -1,96 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 12009 untranslated -->
-
-
-  <sect2 arch="arm"><title>CPU, Main Boards, and Video Support</title>
-
-<para>
-
-Each distinct ARM architecture requires its own kernel, because of
-this the standard Debian distribution only supports installation on
-a number of the most common systems. The Debian userland however may be used by <emphasis>any</emphasis> ARM CPU including xscale.
-
-</para>
-
-<para>
-
-Most ARM CPUs may be run in either endian mode, however almost every
-current system implementation uses little-endian mode. Debian
-currently only supports little-endian ARM systems.
-
-</para>
-
-<para>
-
-The common supported systems are
-
-<variablelist>
-<varlistentry>
-<term>Netwinder</term>
-<listitem><para>
-
-This is actually the name for the group of machines
-based upon the StrongARM 110 CPU and Intel 21285 Nothbridge it
-comprises machines are: Netwinder (possibly one of the most common ARM
-boxes), CATS (also known as the EB110ATX), EBSA 285 and Compaq
-personal server (cps, aka skiff).
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Bast</term>
-<listitem><para>
-
-This is a modern ARM 920 board with a 266MHz Samsung
-processor. It has integrated IDE, USB, Serial, Parallel, audio, video,
-flash and two ethernet ports. This system has a good bootloader which
-is also found on the CATS and Riscstation systems.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>RiscPC</term>
-<listitem><para>
-
-This machine is the oldest supported hardware it was released
-in 1994. It has RISC OS in ROM, Linux can be booted from that OS using
-linloader. The RiscPC has a modular CPU card and typicaly has a 30MHz
-610, 40MHz 710 or 233MHz Strongarm 110 CPU fitted. The mainboard has
-integrated IDE, SVGA video, parallel port, single serial port, ps 2
-keyboard and proprietay mouse port. The proprietary module expansion
-bus allows for up to eight expansion cards to be fitted depending on
-configuration, several of these modules have Linux drivers.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Riscstation</term>
-<listitem><para>
-
-This is an inexpensive 56MHz 7500FE based machine with
-integrated video, IDE, PS2 keyboard and mouse and two serial
-ports. Its lack of processing power was made up for by its price. It
-may be found in two configurations one with RISC OS and one with a
-simple bootloader.
-
-</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term>LART</term>
-<listitem><para>
-
-This is a modular open hardware platform intended to be built
-be enthusiasts. To be useful to install Debian it requires its KSB
-expansion board.
-
-</para></listitem>
-</varlistentry>
-</variablelist>
-
-</para>
-  </sect2>
-
diff --git a/da/hardware/supported/hppa.xml b/da/hardware/supported/hppa.xml
deleted file mode 100644
index 6f3c8c8ee..000000000
--- a/da/hardware/supported/hppa.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-
-  <sect2 arch="hppa"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-The are two major support <emphasis>&architecture;</emphasis> flavors:
-PA-RISC 1.1 and PA-RISC 2.0.  The PA-RISC 1.1 architecture is targeted
-at 32-bit processors whereas the 2.0 architecture is targeted to
-the 64-bit processors.  Some systems are able to run either kernel.
-In both cases, the userland is 32-bit.  There is the possibility of
-a 64-bit userland in the future.
-
-</para>
-  </sect2>
-
diff --git a/da/hardware/supported/i386.xml b/da/hardware/supported/i386.xml
deleted file mode 100644
index 4b1e4a2ca..000000000
--- a/da/hardware/supported/i386.xml
+++ /dev/null
@@ -1,37 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 39614 untranslated -->
-
-
-  <sect2 arch="x86"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Complete information concerning supported peripherals can be found at
-<ulink url="&url-hardware-howto;">Linux Hardware Compatibility HOWTO</ulink>.
-This section merely outlines the basics.
-
-</para>
-
-   <sect3><title>CPU</title>
-<para>
-
-Nearly all x86-based processors are supported; this includes AMD and
-VIA (former Cyrix) processors as well.  Also the new processors like
-Athlon XP and Intel P4 Xeon are supported.  However, Linux will
-<emphasis>not</emphasis> run on 286 or earlier processors.
-
-</para>
-   </sect3>
-
-   <sect3 id="bus"><title>I/O Bus</title>
-<para>
-
-The system bus is the part of the motherboard which allows the CPU to
-communicate with peripherals such as storage devices.  Your computer
-must use the ISA, EISA, PCI, the Microchannel Architecture (MCA, used
-in IBM's PS/2 line), or VESA Local Bus (VLB, sometimes called the VL
-bus).
-
-</para>
-   </sect3>
-  </sect2>
-
diff --git a/da/hardware/supported/ia64.xml b/da/hardware/supported/ia64.xml
deleted file mode 100644
index 0dabd4a41..000000000
--- a/da/hardware/supported/ia64.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
diff --git a/da/hardware/supported/m68k.xml b/da/hardware/supported/m68k.xml
deleted file mode 100644
index 6e165f6e7..000000000
--- a/da/hardware/supported/m68k.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-  <sect2 arch="m68k"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Complete information concerning supported M68000 based
-(<emphasis>&architecture;</emphasis>) systems can be found at the 
-<ulink url="&url-m68k-faq;">Linux/m68k FAQ</ulink>.  This section merely
-outlines the basics.
-
-</para><para>
-
-The &architecture; port of Linux runs on any 680x0 with a PMMU (Paged
-Memory Management Unit) and a FPU (floating-point unit).  This
-includes the 68020 with an external 68851 PMMU, the 68030, and better,
-and excludes the ``EC'' line of 680x0 processors.  See the 
-<ulink url="&url-m68k-faq;">Linux/m68k FAQ</ulink> for complete details.
-
-</para><para>
-
-There are four major flavors of supported
-<emphasis>&architecture;</emphasis> flavors: Amiga, Atari, Macintosh
-and VME machines.  Amiga and Atari were the first two systems to which
-Linux was ported; in keeping, they are also the two most
-well-supported Debian ports.  The Macintosh line is supported
-incompletely, both by Debian and by the Linux kernel; see 
-<ulink url="&url-m68k-mac;">Linux m68k for Macintosh</ulink> for project
-status and supported hardware.  The BVM and Motorola single board
-VMEbus computers are the most recent addition to the list of machines
-supported by Debian.  Ports to other &architecture; architectures,
-such as the Sun3 architecture and NeXT black box, are underway but not
-yet supported by Debian.
-
-</para>
-  </sect2>
-
-
-
diff --git a/da/hardware/supported/mips.xml b/da/hardware/supported/mips.xml
deleted file mode 100644
index 5b4c53f27..000000000
--- a/da/hardware/supported/mips.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22221 untranslated -->
-
-
-  <sect2 arch="mips"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Debian on &arch-title; currently supports two subarchitectures:
-
-<itemizedlist>
-<listitem><para>
-
-SGI IP22: this platform includes the SGI machines Indy, Indigo 2 and
-Challenge S.  Since these machines are very similar, whenever this document
-refers to the SGI Indy, the Indigo 2 and Challenge S are meant as well.
-
-</para></listitem>
-<listitem><para>
-
-Broadcom BCM1250 (SWARM): this is an ATX form factor evaluation board from
-Broadcom based on their SiByte processor family.
-
-</para></listitem>
-</itemizedlist>
-
-Complete information regarding supported mips/mipsel machines can be found
-at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
-following, only the systems supported by the Debian installer will be
-covered.  If you are looking for support for other subarchitectures, please
-contact the <ulink url="&url-list-subscribe;">
-debian-&architecture; mailing list</ulink>.
-
-</para>
-
-   <sect3><title>CPU</title>
-<para>
-
-On SGI IP22, SGI Indy, Indigo 2 and Challenge S with R4000, R4400 and R5000
-processors are supported by the Debian installation system on big endian
-MIPS.  The Broadcom BCM1250 evaluation board comes with an SB1250 chip with
-two cores which are supported in SMP mode by this installer.
-
-</para><para>
-
-Some MIPS machines can be operated in both big and little endian mode.  For
-little endian MIPS, please read the documentation for the mipsel
-architecture.
-
-</para>
-   </sect3>
-  </sect2>
-
diff --git a/da/hardware/supported/mipsel.xml b/da/hardware/supported/mipsel.xml
deleted file mode 100644
index a0d355211..000000000
--- a/da/hardware/supported/mipsel.xml
+++ /dev/null
@@ -1,146 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 22234 untranslated -->
-
-
-  <sect2 arch="mipsel"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Debian on &arch-title; currently supports three subarchitectures:
-
-<itemizedlist>
-<listitem><para>
-
-DECstation: various models of the DECstation are supported.
-
-</para></listitem>
-<listitem><para>
-
-Cobalt Microserver: only MIPS based Cobalt machines are covered here.
-This included the Cobalt Qube, RaQ, Qube2 and RaQ2, and the Gateway
-Microserver.
-
-</para></listitem>
-<listitem><para>
-
-Broadcom BCM1250 (SWARM): this is an ATX form factor evaluation board from
-Broadcom based on their SiByte processor family.
-
-</para></listitem>
-</itemizedlist>
-
-Complete information regarding supported mips/mipsel machines can be found
-at the <ulink url="&url-linux-mips;">Linux-MIPS homepage</ulink>.  In the
-following, only the systems supported by the Debian installer will be
-covered.  If you are looking for support for other subarchitectures, please
-contact the <ulink url="&url-list-subscribe;">
-debian-&architecture; mailing list</ulink>.
-
-</para>
-
-   <sect3><title>CPU/Machine types</title>
-
-<para>
-
-Currently only DECstations with R3000 and R4000/R4400 CPUs are
-supported by the Debian installation system on little endian MIPS.
-The Debian installation system works on the following machines:
-
-</para><para>
-
-<informaltable>
-<tgroup cols="4">
-<thead>
-<row>
-  <entry>System Type</entry><entry>CPU</entry><entry>Code-name</entry>
-  <entry>Debian subarchitecture</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry>DECstation 5000/1xx</entry>
-  <entry>R3000</entry>
-  <entry>3MIN</entry>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>DECstation 5000/150</entry>
-  <entry>R4000</entry>
-  <entry>3MIN</entry>
-  <entry>r4k-kn04</entry>
-</row><row>
-  <entry>DECstation 5000/200</entry>
-  <entry>R3000</entry>
-  <entry>3MAX</entry>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>DECstation 5000/240</entry>
-  <entry>R3000</entry>
-  <entry>3MAX+</entry>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>DECstation 5000/260</entry>
-  <entry>R4400</entry>
-  <entry>3MAX+</entry>
-  <entry>r4k-kn04</entry>
-</row><row>
-  <entry>Personal DECstation 5000/xx</entry>
-  <entry>R3000</entry>
-  <entry>Maxine</entry>
-  <entry>r3k-kn02</entry>
-</row><row>
-  <entry>Personal DECstation 5000/50</entry>
-  <entry>R4000</entry>
-  <entry>Maxine</entry>
-  <entry>r4k-kn04</entry>
-</row>
-</tbody></tgroup></informaltable>
-
-</para><para>
-
-All Cobalt machines are supported which have a serial console (which is
-needed for the installation).
-
-</para><para>
-
-The Broadcom BCM1250 evaluation board comes with an SB1250 chip with two
-cores which are supported in SMP mode by this installer.
-
-</para>
-   </sect3>
-
-   <sect3><title>Supported console options</title>
-<para>
-
-Serial console is available on all supported DECstations (9600 bps,
-8N1). For using serial console, you have to boot the installer image
-with the "console=ttySx" kernel parameter (with "x" being the number
-of the serial port you have your terminal connected to - usually "2",
-but "0" for the Personal DECstations).  On 3MIN and 3MAX+ (DECstation
-5000/1xx, 5000/240 and 5000/260) local console is available with the
-PMAG-BA and the PMAGB-B graphics options.
-
-</para><para>
-
-If you have a Linux system to use as serial terminal, an easy way
-is to run cu (part of the <classname>uucp</classname> package) on it.
-Example:
-
-<informalexample><screen>
-
-cu -l /dev/ttyS1 -s 9600
-
-</screen></informalexample>
-
-</para><para>
-
-where the option "-l" (line) sets the serial port to use and "-s" (speed)
-sets the speed for the connection (9600 bits per second).
-
-</para><para>
-
-Both Cobalt and Broadcom BCM1250 use 115200 bps.
-
-</para>
-   </sect3>
-  </sect2>
-
diff --git a/da/hardware/supported/powerpc.xml b/da/hardware/supported/powerpc.xml
deleted file mode 100644
index 7373a693d..000000000
--- a/da/hardware/supported/powerpc.xml
+++ /dev/null
@@ -1,248 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-
-  <sect2 arch="powerpc"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-There are four major supported <emphasis>&architecture;</emphasis>
-flavors: PMac (Power-Macintosh) PReP, Apus, and CHRP machines.  Ports
-to other <emphasis>&architecture;</emphasis> architectures, such as
-the Be-Box and MBX architecture, are underway but not yet supported by
-Debian. We may have a 64bit port (Power3) in the future.
-
-</para><para>
-
-Apple (and briefly a few other manufacturers - Power Computing, for
-example) makes a series of Macintosh computers based on the PowerPC
-processor. For purposes of architecture support, they are categorized
-as NuBus, OldWorld PCI, and NewWorld.
-
-</para><para>
-
-Macintosh computers using the 680x0 series of processors are not in
-the PowerPC family but are instead m68k machines. Those models start 
-with `Mac II' or have a 3-digit model number such as Centris 650
-or Quadra 950. Apple's pre-iMac PowerPC model numbers have four digits.
-
-</para><para>
-
-NuBus systems are not currently supported by debian/powerpc. The
-monolithic Linux/PPC kernel architecture does not have support for
-these machines; instead, one must use the MkLinux Mach microkernel,
-which Debian does not yet support. These include the following:
-
-<itemizedlist>
-<listitem><para>
-
-Power Macintosh 6100, 7100, 8100
-
-</para></listitem>
-<listitem><para>
-
-Performa 5200, 6200, 6300
-
-</para></listitem>
-<listitem><para>
-
-Powerbook 1400, 2300, and 5300
-
-</para></listitem>
-<listitem><para>
-
-Workgroup Server 6150, 8150, 9150
-
-</para></listitem>
-</itemizedlist>
-
-A linux kernel for these machines and limited support is available at 
-<ulink url="http://nubus-pmac.sourceforge.net/"></ulink>
-
-</para><para>
-
-OldWorld systems are most Power Macintoshes with a floppy drive and a
-PCI bus. Most 603, 603e, 604, and 604e based Power Macintoshes are
-OldWorld machines. The beige colored G3 systems are also OldWorld.
-
-</para><para>
-
-The so called NewWorld PowerMacs are any PowerMacs in translucent
-colored plastic cases. That includes all iMacs, iBooks, G4 systems,
-blue colored G3 systems, and most PowerBooks manufactured in and after
-1999. The NewWorld PowerMacs are also known for using the `ROM in RAM'
-system for MacOS, and were manufactured from mid-1998 onwards.
-
-</para><para>
-
-Recently introduced Macintosh systems have hardware which is more well
-supported by the 2.4 Linux kernel. For some, the 2.2 kernel just
-doesn't work. The new-powermac flavor, which uses the 2.4 kernel, has
-been added to keep up with the hardware. The new-powermac flavor may
-also be installed on other OldWorld and NewWorld machines. Machines
-for which new-powermac is highly recommended are flagged with an
-asterisk below.
-
-</para><para>
-
-Specifications for Apple hardware are available at 
-<ulink url="http://www.info.apple.com/support/applespec.html">AppleSpec</ulink>,
-and, for older hardware, 
-<ulink url="http://www.info.apple.com/support/applespec.legacy/index.html">AppleSpec Legacy</ulink>.
-
-</para><para>
-
-<informaltable>
-<tgroup cols="3">
-<colspec colname="c1"/>
-<colspec colname="c2"/>
-<colspec colname="c3"/>
-<thead>
-<row>
-  <entry namest="c1" nameend="c2">Model Name/Number</entry>
-  <entry>Architecture</entry>
-</row>
-</thead>
-
-<tbody>
-<row>
-  <entry morerows="22">Apple</entry>
-  <entry>iMac Bondi Blue, 5 Flavors, Slot Loading</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>iMac Summer 2000, Early 2001</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* iBook, iBook SE, iBook Dual USB</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* iBook2</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>Power Macintosh Blue and White (B&amp;W) G3</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* Power Macintosh G4 PCI, AGP, Cube</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* Power Macintosh G4 Gigabit Ethernet</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* Power Macintosh G4 Digital Audio, Quicksilver</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>PowerBook G3 FireWire Pismo (2000)</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>PowerBook G3 Lombard (1999)</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>* PowerBook G4 Titanium</entry>
-  <entry>powermac-NewWorld</entry>
-</row><row>
-  <entry>Performa 4400, 54xx, 5500</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Performa 6360, 6400, 6500</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 4400, 5400</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 7200, 7300, 7500, 7600</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 8200, 8500, 8600</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh 9500, 9600</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh (Beige) G3 Minitower</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Power Macintosh (Beige) Desktop, All-in-One</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>PowerBook 2400, 3400, 3500</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>PowerBook G3 Wallstreet (1998)</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Twentieth Anniversary Macintosh</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Workgroup Server 7250, 7350, 8550, 9650, G3</entry>
-  <entry>powermac-OldWorld</entry>
-</row>
-
-<row>
-  <entry morerows="1">Power Computing</entry>
-  <entry>PowerBase, PowerTower / Pro, PowerWave</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>PowerCenter / Pro, PowerCurve</entry>
-  <entry>powermac-OldWorld</entry>
-</row>
-
-<row>
-  <entry>UMAX</entry>
-  <entry>C500, C600, J700, S900</entry>
-  <entry>powermac-OldWorld</entry>
-</row>
-
-<row>
-  <entry>APS</entry>
-  <entry>APS Tech M*Power 604e/2000</entry>
-  <entry>powermac-OldWorld</entry>
-</row>
-
-<row>
-  <entry morerows="5">Motorola</entry>
-  <entry>Starmax 3000, 4000, 5000, 5500</entry>
-  <entry>powermac-OldWorld</entry>
-</row><row>
-  <entry>Firepower, PowerStack Series E, PowerStack II</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>MPC 7xx, 8xx</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>MTX, MTX+</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>MVME2300(SC)/24xx/26xx/27xx/36xx/46xx</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>MCP(N)750</entry>
-  <entry>prep</entry>
-</row>
-
-<row>
-  <entry morerows="4">IBM RS/6000</entry>
-  <entry>40P, 43P</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>Power 830/850/860 (6070, 6050)</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>6030, 7025, 7043</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>p640</entry>
-  <entry>prep</entry>
-</row><row>
-  <entry>B50, 43P-150, 44P</entry>
-  <entry>chrp</entry>
-</row>
-
-<row>
-  <entry>Amiga Power-UP Systems (APUS)</entry>
-  <entry>A1200, A3000, A4000</entry>
-  <entry>apus</entry>
-</row>
-
-</tbody></tgroup></informaltable>
-
-</para>
-  </sect2>
diff --git a/da/hardware/supported/s390.xml b/da/hardware/supported/s390.xml
deleted file mode 100644
index 3de7074d1..000000000
--- a/da/hardware/supported/s390.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-
-  <sect2 arch="s390"><title>S/390 and zSeries machine types</title>
-<para>
-
-Complete information regarding supported S/390 and zSeries machines can
-be found in IBM's Redbook 
-<ulink url="http://www.redbooks.ibm.com/pubs/pdfs/redbooks/sg246264.pdf">
-Linux for IBM eServer zSeries and S/390: Distributions</ulink> in
-chapter 2.1 or at the 
-<ulink url="http://oss.software.ibm.com/developerworks/opensource/linux390/documentation-2.4.shtml">technical details web page</ulink> at 
-<ulink url="http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml">developerWorks</ulink>.
-In short, G5, Multiprise 3000, G6 and all zSeries are fully supported;
-Multiprise 2000, G3 and G4 machines are supported with IEEE floating
-point emulation and thus degraded performance.
-
-</para>
-  </sect2>
-
diff --git a/da/hardware/supported/sparc.xml b/da/hardware/supported/sparc.xml
deleted file mode 100644
index 4ee2352eb..000000000
--- a/da/hardware/supported/sparc.xml
+++ /dev/null
@@ -1,82 +0,0 @@
-<!-- retain these comments for translator revision tracking -->
-<!-- original version: 11648 untranslated -->
-
-
-  <sect2 arch="sparc" id="sparc-cpus"><title>CPU, Main Boards, and Video Support</title>
-<para>
-
-Currently the <emphasis>&architecture;</emphasis> port supports
-several types of Sparc systems. The most common identifiers for Sparc
-systems are sun4, sun4c, sun4m, sun4d and sun4u. Currently we do not
-support very old sun4 hardware. However, the other systems are
-supported. Sun4d has been tested the least of these, so expect
-possible problems with regard to the kernel stability. Sun4c and
-Sun4m, the most common of the older Sparc hardware, includes such
-systems as SparcStation 1, 1+, IPC, IPX and the SparcStation LX, 5,
-10, and 20, respectively. The UltraSPARC class systems fall under the
-sun4u identifier, and are supported using the sun4u set of install
-images. Some systems that fall under these supported identifiers are
-known to not be supported. Known unsupported systems are the AP1000
-multicomputer and the Tadpole Sparcbook 1. See the 
-<ulink url="&url-sparc-linux-faq;">Linux for SPARCProcessors FAQ</ulink> 
-for complete information.
-
-</para>
-
-   <sect3><title>Memory Configuration</title>
-<para>
-
-Some older Sun workstations, notably the Sun IPX and Sun IPC have
-memory banks located at fixed locations in physical memory.  Thus if
-the banks are not filled gaps will exist in the physical memory space.
-The Linux installation requires a contiguous memory block into which
-to load the kernel and the initial RAMdisk.  If this is not available a
-`Data Access Exception' will result.
-
-</para><para>
-
-Thus you must configure the memory so that the lowest memory block is
-contiguous for at least 8Mb.  In the IPX and IPC cited above, memory banks
-are mapped in at 16Mb boundaries.  In effect this means that you must have
-a sufficiently large SIMM in bank zero to hold the kernel and RAMdisk.
-In this case 4Mb is <emphasis>not</emphasis> sufficient.
-
-</para><para>
-
-Example:
-In a Sun IPX you have a 16Mb SIMM and a 4Mb SIMM.  There are four
-SIMM banks (0,1,2,3). [Bank zero is that furthest away from the SBUS
-connectors]. You must therefore install the 16Mb SIMM in bank 0; it is
-then recommended to install the 4Mb SIMM in bank 2. 
-
-</para>
-   </sect3>
-
-   <sect3><title>Graphics Configuration</title>
-<para>
-
-Especially in the case of older Sun workstations, it is very common
-for there to be an onboard framebuffer which has been superseded (for
-example the bwtwo on a sun IPC), and an SBUS card containing a later
-probably accelerated buffer is then plugged in to an SBUS slot.
-Under Solaris/SunOS this causes no problems because both cards are
-initialised.  
-
-</para><para>
-
-However with Linux this can cause a problem, in that the boot PROM
-monitor may display its output on this additional card; however the
-linux kernel boot messages may then be directed to the original on
-board framebuffer, leaving <emphasis>no</emphasis> error messages on
-the screen, with the machine apparently stuck loading the RAMdisk.
-
-</para><para>
-
-To avoid this problem, connect the monitor (if required) to the video
-card in the lowest numbered SBUS slot (on motherboard card counts 
-as below external slots).  Alternatively it is possible to use a serial
-console.
-
-</para>
-   </sect3>
-  </sect2>