diff options
Diffstat (limited to 'etc/hostapd/appliance/interfaces.conf.sample')
| -rw-r--r-- | etc/hostapd/appliance/interfaces.conf.sample | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/etc/hostapd/appliance/interfaces.conf.sample b/etc/hostapd/appliance/interfaces.conf.sample new file mode 100644 index 0000000..d346368 --- /dev/null +++ b/etc/hostapd/appliance/interfaces.conf.sample @@ -0,0 +1,35 @@ +# This is an iface stanza for interfaces(5) with relatively sane +# defaults. Consult http://manpages.org/etc-network-interfaces/5 for +# more. +# +# The `eth0` networking interface represents the virtual Ethernet card +# of the guest, which is shared with the host. The `gateway` IP +# address should match with the address as it was configured on the +# host, and `address` is the guest's own address. In addition to +# this, it is recommended to setup a NAT between `wifibox0` and the +# interface that faces towards the Internet. This can be done with +# the help of pf(4) for example. Here is sample configuration, see +# pf.conf(5) for more information. +# +# wlan_if="wifibox0" +# lan_if="em0" +# virt_net="10.0.0.0/24" +# +# scrub all +# nat on $lan_if from $virt_net to any -> $lan_if +# pass log all +# +# Change these values as desired, they are here only for inspiration. + +iface eth0 inet static + gateway 10.0.0.1 + address 10.0.0.2/24 + +# The `wlan0` networking interface is associated with the wireless +# networking card as it is exposed by the driver. By this default +# configuration, the corresponding IP address is statically set to +# make it the gateway for the wireless network, see the contents of +# udhcp.conf for the rest. + +iface wlan0 inet static + address 192.168.0.1/24 |