diff options
Diffstat (limited to 'nrf-softdevice-s140')
| -rw-r--r-- | nrf-softdevice-s140/src/bindings.rs | 5749 |
1 files changed, 2743 insertions, 3006 deletions
diff --git a/nrf-softdevice-s140/src/bindings.rs b/nrf-softdevice-s140/src/bindings.rs index 8b727a6..9d2190c 100644 --- a/nrf-softdevice-s140/src/bindings.rs +++ b/nrf-softdevice-s140/src/bindings.rs @@ -1,4 +1,3 @@ - /* * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA * All rights reserved. @@ -1724,12 +1723,11 @@ fn bindgen_test_layout_nrf_ecb_hal_data_block_t() { ); } - #[doc = "@brief Initialize a mutex."] - #[doc = ""] - #[doc = " @param[in] p_mutex Pointer to the mutex to initialize."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Initialize a mutex."] +#[doc = ""] +#[doc = " @param[in] p_mutex Pointer to the mutex to initialize."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_mutex_new(p_mutex: *mut nrf_mutex_t) -> u32 { let ret: u32; @@ -1743,14 +1741,12 @@ pub unsafe fn sd_mutex_new(p_mutex: *mut nrf_mutex_t) -> u32 { ret } - - #[doc = "@brief Attempt to acquire a mutex."] - #[doc = ""] - #[doc = " @param[in] p_mutex Pointer to the mutex to acquire."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The mutex was successfully acquired."] - #[doc = " @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired."] - +#[doc = "@brief Attempt to acquire a mutex."] +#[doc = ""] +#[doc = " @param[in] p_mutex Pointer to the mutex to acquire."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The mutex was successfully acquired."] +#[doc = " @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired."] #[inline(always)] pub unsafe fn sd_mutex_acquire(p_mutex: *mut nrf_mutex_t) -> u32 { let ret: u32; @@ -1764,13 +1760,11 @@ pub unsafe fn sd_mutex_acquire(p_mutex: *mut nrf_mutex_t) -> u32 { ret } - - #[doc = "@brief Release a mutex."] - #[doc = ""] - #[doc = " @param[in] p_mutex Pointer to the mutex to release."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Release a mutex."] +#[doc = ""] +#[doc = " @param[in] p_mutex Pointer to the mutex to release."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_mutex_release(p_mutex: *mut nrf_mutex_t) -> u32 { let ret: u32; @@ -1784,13 +1778,11 @@ pub unsafe fn sd_mutex_release(p_mutex: *mut nrf_mutex_t) -> u32 { ret } - - #[doc = "@brief Query the capacity of the application random pool."] - #[doc = ""] - #[doc = " @param[out] p_pool_capacity The capacity of the pool."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Query the capacity of the application random pool."] +#[doc = ""] +#[doc = " @param[out] p_pool_capacity The capacity of the pool."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_rand_application_pool_capacity_get(p_pool_capacity: *mut u8) -> u32 { let ret: u32; @@ -1804,13 +1796,11 @@ pub unsafe fn sd_rand_application_pool_capacity_get(p_pool_capacity: *mut u8) -> ret } - - #[doc = "@brief Get number of random bytes available to the application."] - #[doc = ""] - #[doc = " @param[out] p_bytes_available The number of bytes currently available in the pool."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Get number of random bytes available to the application."] +#[doc = ""] +#[doc = " @param[out] p_bytes_available The number of bytes currently available in the pool."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_rand_application_bytes_available_get(p_bytes_available: *mut u8) -> u32 { let ret: u32; @@ -1824,15 +1814,13 @@ pub unsafe fn sd_rand_application_bytes_available_get(p_bytes_available: *mut u8 ret } - - #[doc = "@brief Get random bytes from the application pool."] - #[doc = ""] - #[doc = " @param[out] p_buff Pointer to unit8_t buffer for storing the bytes."] - #[doc = " @param[in] length Number of bytes to take from pool and place in p_buff."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The requested bytes were written to p_buff."] - #[doc = " @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available."] - +#[doc = "@brief Get random bytes from the application pool."] +#[doc = ""] +#[doc = " @param[out] p_buff Pointer to unit8_t buffer for storing the bytes."] +#[doc = " @param[in] length Number of bytes to take from pool and place in p_buff."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The requested bytes were written to p_buff."] +#[doc = " @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available."] #[inline(always)] pub unsafe fn sd_rand_application_vector_get(p_buff: *mut u8, length: u8) -> u32 { let ret: u32; @@ -1846,13 +1834,11 @@ pub unsafe fn sd_rand_application_vector_get(p_buff: *mut u8, length: u8) -> u32 ret } - - #[doc = "@brief Gets the reset reason register."] - #[doc = ""] - #[doc = " @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Gets the reset reason register."] +#[doc = ""] +#[doc = " @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_reset_reason_get(p_reset_reason: *mut u32) -> u32 { let ret: u32; @@ -1866,13 +1852,11 @@ pub unsafe fn sd_power_reset_reason_get(p_reset_reason: *mut u32) -> u32 { ret } - - #[doc = "@brief Clears the bits of the reset reason register."] - #[doc = ""] - #[doc = " @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Clears the bits of the reset reason register."] +#[doc = ""] +#[doc = " @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_reset_reason_clr(reset_reason_clr_msk: u32) -> u32 { let ret: u32; @@ -1886,14 +1870,12 @@ pub unsafe fn sd_power_reset_reason_clr(reset_reason_clr_msk: u32) -> u32 { ret } - - #[doc = "@brief Sets the power mode when in CPU sleep."] - #[doc = ""] - #[doc = " @param[in] power_mode The power mode to use when in CPU sleep, see @ref NRF_POWER_MODES. @sa sd_app_evt_wait"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The power mode was set."] - #[doc = " @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown."] - +#[doc = "@brief Sets the power mode when in CPU sleep."] +#[doc = ""] +#[doc = " @param[in] power_mode The power mode to use when in CPU sleep, see @ref NRF_POWER_MODES. @sa sd_app_evt_wait"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The power mode was set."] +#[doc = " @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown."] #[inline(always)] pub unsafe fn sd_power_mode_set(power_mode: u8) -> u32 { let ret: u32; @@ -1907,11 +1889,9 @@ pub unsafe fn sd_power_mode_set(power_mode: u8) -> u32 { ret } - - #[doc = "@brief Puts the chip in System OFF mode."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN"] - +#[doc = "@brief Puts the chip in System OFF mode."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN"] #[inline(always)] pub unsafe fn sd_power_system_off() -> u32 { let ret: u32; @@ -1925,16 +1905,14 @@ pub unsafe fn sd_power_system_off() -> u32 { ret } - - #[doc = "@brief Enables or disables the power-fail comparator."] - #[doc = ""] - #[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs."] - #[doc = " The event can be retrieved with sd_evt_get();"] - #[doc = ""] - #[doc = " @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Enables or disables the power-fail comparator."] +#[doc = ""] +#[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs."] +#[doc = " The event can be retrieved with sd_evt_get();"] +#[doc = ""] +#[doc = " @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_pof_enable(pof_enable: u8) -> u32 { let ret: u32; @@ -1948,18 +1926,16 @@ pub unsafe fn sd_power_pof_enable(pof_enable: u8) -> u32 { ret } - - #[doc = "@brief Enables or disables the USB power ready event."] - #[doc = ""] - #[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_POWER_READY) when a USB 3.3 V supply is ready."] - #[doc = " The event can be retrieved with sd_evt_get();"] - #[doc = ""] - #[doc = " @param[in] usbpwrrdy_enable True if the power ready event should be enabled, false if it should be disabled."] - #[doc = ""] - #[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Enables or disables the USB power ready event."] +#[doc = ""] +#[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_POWER_READY) when a USB 3.3 V supply is ready."] +#[doc = " The event can be retrieved with sd_evt_get();"] +#[doc = ""] +#[doc = " @param[in] usbpwrrdy_enable True if the power ready event should be enabled, false if it should be disabled."] +#[doc = ""] +#[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_usbpwrrdy_enable(usbpwrrdy_enable: u8) -> u32 { let ret: u32; @@ -1973,18 +1949,16 @@ pub unsafe fn sd_power_usbpwrrdy_enable(usbpwrrdy_enable: u8) -> u32 { ret } - - #[doc = "@brief Enables or disables the power USB-detected event."] - #[doc = ""] - #[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_DETECTED) when a voltage supply is detected on VBUS."] - #[doc = " The event can be retrieved with sd_evt_get();"] - #[doc = ""] - #[doc = " @param[in] usbdetected_enable True if the power ready event should be enabled, false if it should be disabled."] - #[doc = ""] - #[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Enables or disables the power USB-detected event."] +#[doc = ""] +#[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_DETECTED) when a voltage supply is detected on VBUS."] +#[doc = " The event can be retrieved with sd_evt_get();"] +#[doc = ""] +#[doc = " @param[in] usbdetected_enable True if the power ready event should be enabled, false if it should be disabled."] +#[doc = ""] +#[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_usbdetected_enable(usbdetected_enable: u8) -> u32 { let ret: u32; @@ -1998,18 +1972,16 @@ pub unsafe fn sd_power_usbdetected_enable(usbdetected_enable: u8) -> u32 { ret } - - #[doc = "@brief Enables or disables the power USB-removed event."] - #[doc = ""] - #[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_REMOVED) when a voltage supply is removed from VBUS."] - #[doc = " The event can be retrieved with sd_evt_get();"] - #[doc = ""] - #[doc = " @param[in] usbremoved_enable True if the power ready event should be enabled, false if it should be disabled."] - #[doc = ""] - #[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Enables or disables the power USB-removed event."] +#[doc = ""] +#[doc = " Enabling this will give a SoftDevice event (NRF_EVT_POWER_USB_REMOVED) when a voltage supply is removed from VBUS."] +#[doc = " The event can be retrieved with sd_evt_get();"] +#[doc = ""] +#[doc = " @param[in] usbremoved_enable True if the power ready event should be enabled, false if it should be disabled."] +#[doc = ""] +#[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_usbremoved_enable(usbremoved_enable: u8) -> u32 { let ret: u32; @@ -2023,15 +1995,13 @@ pub unsafe fn sd_power_usbremoved_enable(usbremoved_enable: u8) -> u32 { ret } - - #[doc = "@brief Get USB supply status register content."] - #[doc = ""] - #[doc = " @param[out] usbregstatus The content of USBREGSTATUS register."] - #[doc = ""] - #[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Get USB supply status register content."] +#[doc = ""] +#[doc = " @param[out] usbregstatus The content of USBREGSTATUS register."] +#[doc = ""] +#[doc = " @note Calling this function on a chip without USBD peripheral will result in undefined behaviour."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_usbregstatus_get(usbregstatus: *mut u32) -> u32 { let ret: u32; @@ -2045,18 +2015,16 @@ pub unsafe fn sd_power_usbregstatus_get(usbregstatus: *mut u32) -> u32 { ret } - - #[doc = "@brief Sets the power failure comparator threshold value."] - #[doc = ""] - #[doc = " @note: Power failure comparator threshold setting. This setting applies both for normal voltage"] - #[doc = " mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to"] - #[doc = " VDDH only)."] - #[doc = ""] - #[doc = " @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDS."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The power failure threshold was set."] - #[doc = " @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown."] - +#[doc = "@brief Sets the power failure comparator threshold value."] +#[doc = ""] +#[doc = " @note: Power failure comparator threshold setting. This setting applies both for normal voltage"] +#[doc = " mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to"] +#[doc = " VDDH only)."] +#[doc = ""] +#[doc = " @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDS."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The power failure threshold was set."] +#[doc = " @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown."] #[inline(always)] pub unsafe fn sd_power_pof_threshold_set(threshold: u8) -> u32 { let ret: u32; @@ -2070,18 +2038,16 @@ pub unsafe fn sd_power_pof_threshold_set(threshold: u8) -> u32 { ret } - - #[doc = "@brief Sets the power failure comparator threshold value for high voltage."] - #[doc = ""] - #[doc = " @note: Power failure comparator threshold setting for high voltage mode (supply connected to"] - #[doc = " VDDH only). This setting does not apply for normal voltage mode (supply connected to both"] - #[doc = " VDD and VDDH)."] - #[doc = ""] - #[doc = " @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDVDDHS."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The power failure threshold was set."] - #[doc = " @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown."] - +#[doc = "@brief Sets the power failure comparator threshold value for high voltage."] +#[doc = ""] +#[doc = " @note: Power failure comparator threshold setting for high voltage mode (supply connected to"] +#[doc = " VDDH only). This setting does not apply for normal voltage mode (supply connected to both"] +#[doc = " VDD and VDDH)."] +#[doc = ""] +#[doc = " @param[in] threshold The power-fail threshold value to use, see @ref NRF_POWER_THRESHOLDVDDHS."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The power failure threshold was set."] +#[doc = " @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown."] #[inline(always)] pub unsafe fn sd_power_pof_thresholdvddh_set(threshold: u8) -> u32 { let ret: u32; @@ -2095,14 +2061,12 @@ pub unsafe fn sd_power_pof_thresholdvddh_set(threshold: u8) -> u32 { ret } - - #[doc = "@brief Writes the NRF_POWER->RAM[index].POWERSET register."] - #[doc = ""] - #[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERSET register to write to."] - #[doc = " @param[in] ram_powerset Contains the word to write to the NRF_POWER->RAM[index].POWERSET register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Writes the NRF_POWER->RAM[index].POWERSET register."] +#[doc = ""] +#[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERSET register to write to."] +#[doc = " @param[in] ram_powerset Contains the word to write to the NRF_POWER->RAM[index].POWERSET register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_ram_power_set(index: u8, ram_powerset: u32) -> u32 { let ret: u32; @@ -2116,14 +2080,12 @@ pub unsafe fn sd_power_ram_power_set(index: u8, ram_powerset: u32) -> u32 { ret } - - #[doc = "@brief Writes the NRF_POWER->RAM[index].POWERCLR register."] - #[doc = ""] - #[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERCLR register to write to."] - #[doc = " @param[in] ram_powerclr Contains the word to write to the NRF_POWER->RAM[index].POWERCLR register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Writes the NRF_POWER->RAM[index].POWERCLR register."] +#[doc = ""] +#[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWERCLR register to write to."] +#[doc = " @param[in] ram_powerclr Contains the word to write to the NRF_POWER->RAM[index].POWERCLR register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_ram_power_clr(index: u8, ram_powerclr: u32) -> u32 { let ret: u32; @@ -2137,14 +2099,12 @@ pub unsafe fn sd_power_ram_power_clr(index: u8, ram_powerclr: u32) -> u32 { ret } - - #[doc = "@brief Get contents of NRF_POWER->RAM[index].POWER register, indicates power status of RAM[index] blocks."] - #[doc = ""] - #[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWER register to read from."] - #[doc = " @param[out] p_ram_power Content of NRF_POWER->RAM[index].POWER register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Get contents of NRF_POWER->RAM[index].POWER register, indicates power status of RAM[index] blocks."] +#[doc = ""] +#[doc = " @param[in] index Contains the index in the NRF_POWER->RAM[index].POWER register to read from."] +#[doc = " @param[out] p_ram_power Content of NRF_POWER->RAM[index].POWER register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_ram_power_get(index: u8, p_ram_power: *mut u32) -> u32 { let ret: u32; @@ -2158,14 +2118,12 @@ pub unsafe fn sd_power_ram_power_get(index: u8, p_ram_power: *mut u32) -> u32 { ret } - - #[doc = "@brief Set bits in the general purpose retention registers (NRF_POWER->GPREGRET*)."] - #[doc = ""] - #[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] - #[doc = " @param[in] gpregret_msk Bits to be set in the GPREGRET register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Set bits in the general purpose retention registers (NRF_POWER->GPREGRET*)."] +#[doc = ""] +#[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] +#[doc = " @param[in] gpregret_msk Bits to be set in the GPREGRET register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_gpregret_set(gpregret_id: u32, gpregret_msk: u32) -> u32 { let ret: u32; @@ -2179,14 +2137,12 @@ pub unsafe fn sd_power_gpregret_set(gpregret_id: u32, gpregret_msk: u32) -> u32 ret } - - #[doc = "@brief Clear bits in the general purpose retention registers (NRF_POWER->GPREGRET*)."] - #[doc = ""] - #[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] - #[doc = " @param[in] gpregret_msk Bits to be clear in the GPREGRET register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Clear bits in the general purpose retention registers (NRF_POWER->GPREGRET*)."] +#[doc = ""] +#[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] +#[doc = " @param[in] gpregret_msk Bits to be clear in the GPREGRET register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_gpregret_clr(gpregret_id: u32, gpregret_msk: u32) -> u32 { let ret: u32; @@ -2200,14 +2156,12 @@ pub unsafe fn sd_power_gpregret_clr(gpregret_id: u32, gpregret_msk: u32) -> u32 ret } - - #[doc = "@brief Get contents of the general purpose retention registers (NRF_POWER->GPREGRET*)."] - #[doc = ""] - #[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] - #[doc = " @param[out] p_gpregret Contents of the GPREGRET register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Get contents of the general purpose retention registers (NRF_POWER->GPREGRET*)."] +#[doc = ""] +#[doc = " @param[in] gpregret_id 0 for GPREGRET, 1 for GPREGRET2."] +#[doc = " @param[out] p_gpregret Contents of the GPREGRET register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_power_gpregret_get(gpregret_id: u32, p_gpregret: *mut u32) -> u32 { let ret: u32; @@ -2221,14 +2175,12 @@ pub unsafe fn sd_power_gpregret_get(gpregret_id: u32, p_gpregret: *mut u32) -> u ret } - - #[doc = "@brief Enable or disable the DC/DC regulator for the regulator stage 1 (REG1)."] - #[doc = ""] - #[doc = " @param[in] dcdc_mode The mode of the DCDC, see @ref NRF_POWER_DCDC_MODES."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid."] - +#[doc = "@brief Enable or disable the DC/DC regulator for the regulator stage 1 (REG1)."] +#[doc = ""] +#[doc = " @param[in] dcdc_mode The mode of the DCDC, see @ref NRF_POWER_DCDC_MODES."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid."] #[inline(always)] pub unsafe fn sd_power_dcdc_mode_set(dcdc_mode: u8) -> u32 { let ret: u32; @@ -2242,16 +2194,14 @@ pub unsafe fn sd_power_dcdc_mode_set(dcdc_mode: u8) -> u32 { ret } - - #[doc = "@brief Enable or disable the DC/DC regulator for the regulator stage 0 (REG0)."] - #[doc = ""] - #[doc = " For more details on the REG0 stage, please see product specification."] - #[doc = ""] - #[doc = " @param[in] dcdc_mode The mode of the DCDC0, see @ref NRF_POWER_DCDC_MODES."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM The dcdc_mode is invalid."] - +#[doc = "@brief Enable or disable the DC/DC regulator for the regulator stage 0 (REG0)."] +#[doc = ""] +#[doc = " For more details on the REG0 stage, please see product specification."] +#[doc = ""] +#[doc = " @param[in] dcdc_mode The mode of the DCDC0, see @ref NRF_POWER_DCDC_MODES."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM The dcdc_mode is invalid."] #[inline(always)] pub unsafe fn sd_power_dcdc0_mode_set(dcdc_mode: u8) -> u32 { let ret: u32; @@ -2265,17 +2215,15 @@ pub unsafe fn sd_power_dcdc0_mode_set(dcdc_mode: u8) -> u32 { ret } - - #[doc = "@brief Request the high frequency crystal oscillator."] - #[doc = ""] - #[doc = " Will start the high frequency crystal oscillator, the startup time of the crystal varies"] - #[doc = " and the ::sd_clock_hfclk_is_running function can be polled to check if it has started."] - #[doc = ""] - #[doc = " @see sd_clock_hfclk_is_running"] - #[doc = " @see sd_clock_hfclk_release"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Request the high frequency crystal oscillator."] +#[doc = ""] +#[doc = " Will start the high frequency crystal oscillator, the startup time of the crystal varies"] +#[doc = " and the ::sd_clock_hfclk_is_running function can be polled to check if it has started."] +#[doc = ""] +#[doc = " @see sd_clock_hfclk_is_running"] +#[doc = " @see sd_clock_hfclk_release"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_clock_hfclk_request() -> u32 { let ret: u32; @@ -2289,16 +2237,14 @@ pub unsafe fn sd_clock_hfclk_request() -> u32 { ret } - - #[doc = "@brief Releases the high frequency crystal oscillator."] - #[doc = ""] - #[doc = " Will stop the high frequency crystal oscillator, this happens immediately."] - #[doc = ""] - #[doc = " @see sd_clock_hfclk_is_running"] - #[doc = " @see sd_clock_hfclk_request"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Releases the high frequency crystal oscillator."] +#[doc = ""] +#[doc = " Will stop the high frequency crystal oscillator, this happens immediately."] +#[doc = ""] +#[doc = " @see sd_clock_hfclk_is_running"] +#[doc = " @see sd_clock_hfclk_request"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_clock_hfclk_release() -> u32 { let ret: u32; @@ -2312,16 +2258,14 @@ pub unsafe fn sd_clock_hfclk_release() -> u32 { ret } - - #[doc = "@brief Checks if the high frequency crystal oscillator is running."] - #[doc = ""] - #[doc = " @see sd_clock_hfclk_request"] - #[doc = " @see sd_clock_hfclk_release"] - #[doc = ""] - #[doc = " @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Checks if the high frequency crystal oscillator is running."] +#[doc = ""] +#[doc = " @see sd_clock_hfclk_request"] +#[doc = " @see sd_clock_hfclk_release"] +#[doc = ""] +#[doc = " @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_clock_hfclk_is_running(p_is_running: *mut u32) -> u32 { let ret: u32; @@ -2335,33 +2279,31 @@ pub unsafe fn sd_clock_hfclk_is_running(p_is_running: *mut u32) -> u32 { ret } - - #[doc = "@brief Waits for an application event."] - #[doc = ""] - #[doc = " An application event is either an application interrupt or a pended interrupt when the interrupt"] - #[doc = " is disabled."] - #[doc = ""] - #[doc = " When the application waits for an application event by calling this function, an interrupt that"] - #[doc = " is enabled will be taken immediately on pending since this function will wait in thread mode,"] - #[doc = " then the execution will return in the application's main thread."] - #[doc = ""] - #[doc = " In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M"] - #[doc = " MCU's System Control Register (SCR), CMSIS_SCB. In that case, when a disabled interrupt gets"] - #[doc = " pended, this function will return to the application's main thread."] - #[doc = ""] - #[doc = " @note The application must ensure that the pended flag is cleared using ::sd_nvic_ClearPendingIRQ"] - #[doc = " in order to sleep using this function. This is only necessary for disabled interrupts, as"] - #[doc = " the interrupt handler will clear the pending flag automatically for enabled interrupts."] - #[doc = ""] - #[doc = " @note If an application interrupt has happened since the last time sd_app_evt_wait was"] - #[doc = " called this function will return immediately and not go to sleep. This is to avoid race"] - #[doc = " conditions that can occur when a flag is updated in the interrupt handler and processed"] - #[doc = " in the main loop."] - #[doc = ""] - #[doc = " @post An application interrupt has happened or a interrupt pending flag is set."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Waits for an application event."] +#[doc = ""] +#[doc = " An application event is either an application interrupt or a pended interrupt when the interrupt"] +#[doc = " is disabled."] +#[doc = ""] +#[doc = " When the application waits for an application event by calling this function, an interrupt that"] +#[doc = " is enabled will be taken immediately on pending since this function will wait in thread mode,"] +#[doc = " then the execution will return in the application's main thread."] +#[doc = ""] +#[doc = " In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M"] +#[doc = " MCU's System Control Register (SCR), CMSIS_SCB. In that case, when a disabled interrupt gets"] +#[doc = " pended, this function will return to the application's main thread."] +#[doc = ""] +#[doc = " @note The application must ensure that the pended flag is cleared using ::sd_nvic_ClearPendingIRQ"] +#[doc = " in order to sleep using this function. This is only necessary for disabled interrupts, as"] +#[doc = " the interrupt handler will clear the pending flag automatically for enabled interrupts."] +#[doc = ""] +#[doc = " @note If an application interrupt has happened since the last time sd_app_evt_wait was"] +#[doc = " called this function will return immediately and not go to sleep. This is to avoid race"] +#[doc = " conditions that can occur when a flag is updated in the interrupt handler and processed"] +#[doc = " in the main loop."] +#[doc = ""] +#[doc = " @post An application interrupt has happened or a interrupt pending flag is set."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_app_evt_wait() -> u32 { let ret: u32; @@ -2375,13 +2317,11 @@ pub unsafe fn sd_app_evt_wait() -> u32 { ret } - - #[doc = "@brief Get PPI channel enable register contents."] - #[doc = ""] - #[doc = " @param[out] p_channel_enable The contents of the PPI CHEN register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Get PPI channel enable register contents."] +#[doc = ""] +#[doc = " @param[out] p_channel_enable The contents of the PPI CHEN register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_channel_enable_get(p_channel_enable: *mut u32) -> u32 { let ret: u32; @@ -2395,13 +2335,11 @@ pub unsafe fn sd_ppi_channel_enable_get(p_channel_enable: *mut u32) -> u32 { ret } - - #[doc = "@brief Set PPI channel enable register."] - #[doc = ""] - #[doc = " @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Set PPI channel enable register."] +#[doc = ""] +#[doc = " @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_channel_enable_set(channel_enable_set_msk: u32) -> u32 { let ret: u32; @@ -2415,13 +2353,11 @@ pub unsafe fn sd_ppi_channel_enable_set(channel_enable_set_msk: u32) -> u32 { ret } - - #[doc = "@brief Clear PPI channel enable register."] - #[doc = ""] - #[doc = " @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Clear PPI channel enable register."] +#[doc = ""] +#[doc = " @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_channel_enable_clr(channel_enable_clr_msk: u32) -> u32 { let ret: u32; @@ -2435,22 +2371,20 @@ pub unsafe fn sd_ppi_channel_enable_clr(channel_enable_clr_msk: u32) -> u32 { ret } - - #[doc = "@brief Assign endpoints to a PPI channel."] - #[doc = ""] - #[doc = " @param[in] channel_num Number of the PPI channel to assign."] - #[doc = " @param[in] evt_endpoint Event endpoint of the PPI channel."] - #[doc = " @param[in] task_endpoint Task endpoint of the PPI channel."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid."] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Assign endpoints to a PPI channel."] +#[doc = ""] +#[doc = " @param[in] channel_num Number of the PPI channel to assign."] +#[doc = " @param[in] evt_endpoint Event endpoint of the PPI channel."] +#[doc = " @param[in] task_endpoint Task endpoint of the PPI channel."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid."] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_channel_assign( - channel_num: u8, - evt_endpoint: *const self::c_void, - task_endpoint: *const self::c_void, - ) -> u32 { + channel_num: u8, + evt_endpoint: *const self::c_void, + task_endpoint: *const self::c_void, +) -> u32 { let ret: u32; asm!("svc 35", inout("r0") to_asm(channel_num) => ret, @@ -2462,14 +2396,12 @@ pub unsafe fn sd_ppi_channel_assign( ret } - - #[doc = "@brief Task to enable a channel group."] - #[doc = ""] - #[doc = " @param[in] group_num Number of the channel group."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid"] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Task to enable a channel group."] +#[doc = ""] +#[doc = " @param[in] group_num Number of the channel group."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid"] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_group_task_enable(group_num: u8) -> u32 { let ret: u32; @@ -2483,14 +2415,12 @@ pub unsafe fn sd_ppi_group_task_enable(group_num: u8) -> u32 { ret } - - #[doc = "@brief Task to disable a channel group."] - #[doc = ""] - #[doc = " @param[in] group_num Number of the PPI group."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Task to disable a channel group."] +#[doc = ""] +#[doc = " @param[in] group_num Number of the PPI group."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_group_task_disable(group_num: u8) -> u32 { let ret: u32; @@ -2504,15 +2434,13 @@ pub unsafe fn sd_ppi_group_task_disable(group_num: u8) -> u32 { ret } - - #[doc = "@brief Assign PPI channels to a channel group."] - #[doc = ""] - #[doc = " @param[in] group_num Number of the channel group."] - #[doc = " @param[in] channel_msk Mask of the channels to assign to the group."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Assign PPI channels to a channel group."] +#[doc = ""] +#[doc = " @param[in] group_num Number of the channel group."] +#[doc = " @param[in] channel_msk Mask of the channels to assign to the group."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_group_assign(group_num: u8, channel_msk: u32) -> u32 { let ret: u32; @@ -2526,15 +2454,13 @@ pub unsafe fn sd_ppi_group_assign(group_num: u8, channel_msk: u32) -> u32 { ret } - - #[doc = "@brief Gets the PPI channels of a channel group."] - #[doc = ""] - #[doc = " @param[in] group_num Number of the channel group."] - #[doc = " @param[out] p_channel_msk Mask of the channels assigned to the group."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Gets the PPI channels of a channel group."] +#[doc = ""] +#[doc = " @param[in] group_num Number of the channel group."] +#[doc = " @param[out] p_channel_msk Mask of the channels assigned to the group."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid."] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ppi_group_get(group_num: u8, p_channel_msk: *mut u32) -> u32 { let ret: u32; @@ -2548,36 +2474,34 @@ pub unsafe fn sd_ppi_group_get(group_num: u8, p_channel_msk: *mut u32) -> u32 { ret } - - #[doc = "@brief Configures the Radio Notification signal."] - #[doc = ""] - #[doc = " @note"] - #[doc = " - The notification signal latency depends on the interrupt priority settings of SWI used"] - #[doc = " for notification signal."] - #[doc = " - To ensure that the radio notification signal behaves in a consistent way, the radio"] - #[doc = " notifications must be configured when there is no protocol stack or other SoftDevice"] - #[doc = " activity in progress. It is recommended that the radio notification signal is"] - #[doc = " configured directly after the SoftDevice has been enabled."] - #[doc = " - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice"] - #[doc = " will interrupt the application to do Radio Event preparation."] - #[doc = " - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have"] - #[doc = " to shorten the connection events to have time for the Radio Notification signals."] - #[doc = ""] - #[doc = " @param[in] type Type of notification signal, see @ref NRF_RADIO_NOTIFICATION_TYPES."] - #[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio"] - #[doc = " notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is"] - #[doc = " recommended (but not required) to be used with"] - #[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_NONE."] - #[doc = ""] - #[doc = " @param[in] distance Distance between the notification signal and start of radio activity, see @ref NRF_RADIO_NOTIFICATION_DISTANCES."] - #[doc = " This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or"] - #[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE A protocol stack or other SoftDevice is running. Stop all"] - #[doc = " running activities and retry."] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Configures the Radio Notification signal."] +#[doc = ""] +#[doc = " @note"] +#[doc = " - The notification signal latency depends on the interrupt priority settings of SWI used"] +#[doc = " for notification signal."] +#[doc = " - To ensure that the radio notification signal behaves in a consistent way, the radio"] +#[doc = " notifications must be configured when there is no protocol stack or other SoftDevice"] +#[doc = " activity in progress. It is recommended that the radio notification signal is"] +#[doc = " configured directly after the SoftDevice has been enabled."] +#[doc = " - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice"] +#[doc = " will interrupt the application to do Radio Event preparation."] +#[doc = " - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have"] +#[doc = " to shorten the connection events to have time for the Radio Notification signals."] +#[doc = ""] +#[doc = " @param[in] type Type of notification signal, see @ref NRF_RADIO_NOTIFICATION_TYPES."] +#[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio"] +#[doc = " notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is"] +#[doc = " recommended (but not required) to be used with"] +#[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_NONE."] +#[doc = ""] +#[doc = " @param[in] distance Distance between the notification signal and start of radio activity, see @ref NRF_RADIO_NOTIFICATION_DISTANCES."] +#[doc = " This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or"] +#[doc = " @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE A protocol stack or other SoftDevice is running. Stop all"] +#[doc = " running activities and retry."] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_radio_notification_cfg_set(type_: u8, distance: u8) -> u32 { let ret: u32; @@ -2591,21 +2515,19 @@ pub unsafe fn sd_radio_notification_cfg_set(type_: u8, distance: u8) -> u32 { ret } - - #[doc = "@brief Encrypts a block according to the specified parameters."] - #[doc = ""] - #[doc = " 128-bit AES encryption."] - #[doc = ""] - #[doc = " @note:"] - #[doc = " - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while"] - #[doc = " the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application"] - #[doc = " main or low interrupt level."] - #[doc = ""] - #[doc = " @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input"] - #[doc = " parameters and one output parameter)."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Encrypts a block according to the specified parameters."] +#[doc = ""] +#[doc = " 128-bit AES encryption."] +#[doc = ""] +#[doc = " @note:"] +#[doc = " - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while"] +#[doc = " the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application"] +#[doc = " main or low interrupt level."] +#[doc = ""] +#[doc = " @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input"] +#[doc = " parameters and one output parameter)."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ecb_block_encrypt(p_ecb_data: *mut nrf_ecb_hal_data_t) -> u32 { let ret: u32; @@ -2619,27 +2541,25 @@ pub unsafe fn sd_ecb_block_encrypt(p_ecb_data: *mut nrf_ecb_hal_data_t) -> u32 { ret } - - #[doc = "@brief Encrypts multiple data blocks provided as an array of data block structures."] - #[doc = ""] - #[doc = " @details: Performs 128-bit AES encryption on multiple data blocks"] - #[doc = ""] - #[doc = " @note:"] - #[doc = " - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while"] - #[doc = " the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application"] - #[doc = " main or low interrupt level."] - #[doc = ""] - #[doc = " @param[in] block_count Count of blocks in the p_data_blocks array."] - #[doc = " @param[in,out] p_data_blocks Pointer to the first entry in a contiguous array of"] - #[doc = " @ref nrf_ecb_hal_data_block_t structures."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Encrypts multiple data blocks provided as an array of data block structures."] +#[doc = ""] +#[doc = " @details: Performs 128-bit AES encryption on multiple data blocks"] +#[doc = ""] +#[doc = " @note:"] +#[doc = " - The application may set the SEVONPEND bit in the SCR to 1 to make the SoftDevice sleep while"] +#[doc = " the ECB is running. The SEVONPEND bit should only be cleared (set to 0) from application"] +#[doc = " main or low interrupt level."] +#[doc = ""] +#[doc = " @param[in] block_count Count of blocks in the p_data_blocks array."] +#[doc = " @param[in,out] p_data_blocks Pointer to the first entry in a contiguous array of"] +#[doc = " @ref nrf_ecb_hal_data_block_t structures."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_ecb_blocks_encrypt( - block_count: u8, - p_data_blocks: *mut nrf_ecb_hal_data_block_t, - ) -> u32 { + block_count: u8, + p_data_blocks: *mut nrf_ecb_hal_data_block_t, +) -> u32 { let ret: u32; asm!("svc 71", inout("r0") to_asm(block_count) => ret, @@ -2651,16 +2571,14 @@ pub unsafe fn sd_ecb_blocks_encrypt( ret } - - #[doc = "@brief Gets any pending events generated by the SoC API."] - #[doc = ""] - #[doc = " The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned."] - #[doc = ""] - #[doc = " @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND No pending events."] - +#[doc = "@brief Gets any pending events generated by the SoC API."] +#[doc = ""] +#[doc = " The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned."] +#[doc = ""] +#[doc = " @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND No pending events."] #[inline(always)] pub unsafe fn sd_evt_get(p_evt_id: *mut u32) -> u32 { let ret: u32; @@ -2674,16 +2592,14 @@ pub unsafe fn sd_evt_get(p_evt_id: *mut u32) -> u32 { ret } - - #[doc = "@brief Get the temperature measured on the chip"] - #[doc = ""] - #[doc = " This function will block until the temperature measurement is done."] - #[doc = " It takes around 50 us from call to return."] - #[doc = ""] - #[doc = " @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees Celsius."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp"] - +#[doc = "@brief Get the temperature measured on the chip"] +#[doc = ""] +#[doc = " This function will block until the temperature measurement is done."] +#[doc = " It takes around 50 us from call to return."] +#[doc = ""] +#[doc = " @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees Celsius."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp"] #[inline(always)] pub unsafe fn sd_temp_get(p_temp: *mut i32) -> u32 { let ret: u32; @@ -2697,42 +2613,40 @@ pub unsafe fn sd_temp_get(p_temp: *mut i32) -> u32 { ret } - - #[doc = "@brief Flash Write"] - #[doc = ""] - #[doc = " Commands to write a buffer to flash"] - #[doc = ""] - #[doc = " If the SoftDevice is enabled:"] - #[doc = " This call initiates the flash access command, and its completion will be communicated to the"] - #[doc = " application with exactly one of the following events:"] - #[doc = " - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed."] - #[doc = " - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started."] - #[doc = ""] - #[doc = " If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the"] - #[doc = " write has been completed"] - #[doc = ""] - #[doc = " @note"] - #[doc = " - This call takes control over the radio and the CPU during flash erase and write to make sure that"] - #[doc = " they will not interfere with the flash access. This means that all interrupts will be blocked"] - #[doc = " for a predictable time (depending on the NVMC specification in the device's Product Specification"] - #[doc = " and the command parameters)."] - #[doc = " - The data in the p_src buffer should not be modified before the @ref NRF_EVT_FLASH_OPERATION_SUCCESS"] - #[doc = " or the @ref NRF_EVT_FLASH_OPERATION_ERROR have been received if the SoftDevice is enabled."] - #[doc = " - This call will make the SoftDevice trigger a hardfault when the page is written, if it is"] - #[doc = " protected."] - #[doc = ""] - #[doc = ""] - #[doc = " @param[in] p_dst Pointer to start of flash location to be written."] - #[doc = " @param[in] p_src Pointer to buffer with data to be written."] - #[doc = " @param[in] size Number of 32-bit words to write. Maximum size is the number of words in one"] - #[doc = " flash page. See the device's Product Specification for details."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned."] - #[doc = " @retval ::NRF_ERROR_BUSY The previous command has not yet completed."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or higher than the maximum allowed size."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Tried to write to an address outside the application flash area."] - #[doc = " @retval ::NRF_SUCCESS The command was accepted."] - +#[doc = "@brief Flash Write"] +#[doc = ""] +#[doc = " Commands to write a buffer to flash"] +#[doc = ""] +#[doc = " If the SoftDevice is enabled:"] +#[doc = " This call initiates the flash access command, and its completion will be communicated to the"] +#[doc = " application with exactly one of the following events:"] +#[doc = " - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed."] +#[doc = " - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started."] +#[doc = ""] +#[doc = " If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the"] +#[doc = " write has been completed"] +#[doc = ""] +#[doc = " @note"] +#[doc = " - This call takes control over the radio and the CPU during flash erase and write to make sure that"] +#[doc = " they will not interfere with the flash access. This means that all interrupts will be blocked"] +#[doc = " for a predictable time (depending on the NVMC specification in the device's Product Specification"] +#[doc = " and the command parameters)."] +#[doc = " - The data in the p_src buffer should not be modified before the @ref NRF_EVT_FLASH_OPERATION_SUCCESS"] +#[doc = " or the @ref NRF_EVT_FLASH_OPERATION_ERROR have been received if the SoftDevice is enabled."] +#[doc = " - This call will make the SoftDevice trigger a hardfault when the page is written, if it is"] +#[doc = " protected."] +#[doc = ""] +#[doc = ""] +#[doc = " @param[in] p_dst Pointer to start of flash location to be written."] +#[doc = " @param[in] p_src Pointer to buffer with data to be written."] +#[doc = " @param[in] size Number of 32-bit words to write. Maximum size is the number of words in one"] +#[doc = " flash page. See the device's Product Specification for details."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned."] +#[doc = " @retval ::NRF_ERROR_BUSY The previous command has not yet completed."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or higher than the maximum allowed size."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Tried to write to an address outside the application flash area."] +#[doc = " @retval ::NRF_SUCCESS The command was accepted."] #[inline(always)] pub unsafe fn sd_flash_write(p_dst: *mut u32, p_src: *const u32, size: u32) -> u32 { let ret: u32; @@ -2746,36 +2660,34 @@ pub unsafe fn sd_flash_write(p_dst: *mut u32, p_src: *const u32, size: u32) -> u ret } - - #[doc = "@brief Flash Erase page"] - #[doc = ""] - #[doc = " Commands to erase a flash page"] - #[doc = " If the SoftDevice is enabled:"] - #[doc = " This call initiates the flash access command, and its completion will be communicated to the"] - #[doc = " application with exactly one of the following events:"] - #[doc = " - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed."] - #[doc = " - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started."] - #[doc = ""] - #[doc = " If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the"] - #[doc = " erase has been completed"] - #[doc = ""] - #[doc = " @note"] - #[doc = " - This call takes control over the radio and the CPU during flash erase and write to make sure that"] - #[doc = " they will not interfere with the flash access. This means that all interrupts will be blocked"] - #[doc = " for a predictable time (depending on the NVMC specification in the device's Product Specification"] - #[doc = " and the command parameters)."] - #[doc = " - This call will make the SoftDevice trigger a hardfault when the page is erased, if it is"] - #[doc = " protected."] - #[doc = ""] - #[doc = ""] - #[doc = " @param[in] page_number Page number of the page to erase"] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page."] - #[doc = " @retval ::NRF_ERROR_BUSY The previous command has not yet completed."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Tried to erase a page outside the application flash area."] - #[doc = " @retval ::NRF_SUCCESS The command was accepted."] - +#[doc = "@brief Flash Erase page"] +#[doc = ""] +#[doc = " Commands to erase a flash page"] +#[doc = " If the SoftDevice is enabled:"] +#[doc = " This call initiates the flash access command, and its completion will be communicated to the"] +#[doc = " application with exactly one of the following events:"] +#[doc = " - @ref NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed."] +#[doc = " - @ref NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started."] +#[doc = ""] +#[doc = " If the SoftDevice is not enabled no event will be generated, and this call will return @ref NRF_SUCCESS when the"] +#[doc = " erase has been completed"] +#[doc = ""] +#[doc = " @note"] +#[doc = " - This call takes control over the radio and the CPU during flash erase and write to make sure that"] +#[doc = " they will not interfere with the flash access. This means that all interrupts will be blocked"] +#[doc = " for a predictable time (depending on the NVMC specification in the device's Product Specification"] +#[doc = " and the command parameters)."] +#[doc = " - This call will make the SoftDevice trigger a hardfault when the page is erased, if it is"] +#[doc = " protected."] +#[doc = ""] +#[doc = ""] +#[doc = " @param[in] page_number Page number of the page to erase"] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page."] +#[doc = " @retval ::NRF_ERROR_BUSY The previous command has not yet completed."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Tried to erase a page outside the application flash area."] +#[doc = " @retval ::NRF_SUCCESS The command was accepted."] #[inline(always)] pub unsafe fn sd_flash_page_erase(page_number: u32) -> u32 { let ret: u32; @@ -2789,27 +2701,25 @@ pub unsafe fn sd_flash_page_erase(page_number: u32) -> u32 { ret } - - #[doc = "@brief Opens a session for radio timeslot requests."] - #[doc = ""] - #[doc = " @note Only one session can be open at a time."] - #[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot"] - #[doc = " starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed"] - #[doc = " by the application."] - #[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0"] - #[doc = " interrupt occurs."] - #[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO"] - #[doc = " interrupt occurs."] - #[doc = " @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This"] - #[doc = " implies that none of the sd_* API calls can be used from p_radio_signal_callback()."] - #[doc = ""] - #[doc = " @param[in] p_radio_signal_callback The signal callback."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer."] - #[doc = " @retval ::NRF_ERROR_BUSY If session cannot be opened."] - #[doc = " @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error."] - #[doc = " @retval ::NRF_SUCCESS Otherwise."] - +#[doc = "@brief Opens a session for radio timeslot requests."] +#[doc = ""] +#[doc = " @note Only one session can be open at a time."] +#[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot"] +#[doc = " starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed"] +#[doc = " by the application."] +#[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0"] +#[doc = " interrupt occurs."] +#[doc = " @note p_radio_signal_callback(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO"] +#[doc = " interrupt occurs."] +#[doc = " @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This"] +#[doc = " implies that none of the sd_* API calls can be used from p_radio_signal_callback()."] +#[doc = ""] +#[doc = " @param[in] p_radio_signal_callback The signal callback."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer."] +#[doc = " @retval ::NRF_ERROR_BUSY If session cannot be opened."] +#[doc = " @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error."] +#[doc = " @retval ::NRF_SUCCESS Otherwise."] #[inline(always)] pub unsafe fn sd_radio_session_open(p_radio_signal_callback: nrf_radio_signal_callback_t) -> u32 { let ret: u32; @@ -2823,18 +2733,16 @@ pub unsafe fn sd_radio_session_open(p_radio_signal_callback: nrf_radio_signal_ca ret } - - #[doc = "@brief Closes a session for radio timeslot requests."] - #[doc = ""] - #[doc = " @note Any current radio timeslot will be finished before the session is closed."] - #[doc = " @note If a radio timeslot is scheduled when the session is closed, it will be canceled."] - #[doc = " @note The application cannot consider the session closed until the @ref NRF_EVT_RADIO_SESSION_CLOSED"] - #[doc = " event is received."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN If session not opened."] - #[doc = " @retval ::NRF_ERROR_BUSY If session is currently being closed."] - #[doc = " @retval ::NRF_SUCCESS Otherwise."] - +#[doc = "@brief Closes a session for radio timeslot requests."] +#[doc = ""] +#[doc = " @note Any current radio timeslot will be finished before the session is closed."] +#[doc = " @note If a radio timeslot is scheduled when the session is closed, it will be canceled."] +#[doc = " @note The application cannot consider the session closed until the @ref NRF_EVT_RADIO_SESSION_CLOSED"] +#[doc = " event is received."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN If session not opened."] +#[doc = " @retval ::NRF_ERROR_BUSY If session is currently being closed."] +#[doc = " @retval ::NRF_SUCCESS Otherwise."] #[inline(always)] pub unsafe fn sd_radio_session_close() -> u32 { let ret: u32; @@ -2848,42 +2756,40 @@ pub unsafe fn sd_radio_session_close() -> u32 { ret } - - #[doc = "@brief Requests a radio timeslot."] - #[doc = ""] - #[doc = " @note The request type is determined by p_request->request_type, and can be one of @ref NRF_RADIO_REQ_TYPE_EARLIEST"] - #[doc = " and @ref NRF_RADIO_REQ_TYPE_NORMAL. The first request in a session must always be of type @ref NRF_RADIO_REQ_TYPE_EARLIEST."] - #[doc = " @note For a normal request (@ref NRF_RADIO_REQ_TYPE_NORMAL), the start time of a radio timeslot is specified by"] - #[doc = " p_request->distance_us and is given relative to the start of the previous timeslot."] - #[doc = " @note A too small p_request->distance_us will lead to a @ref NRF_EVT_RADIO_BLOCKED event."] - #[doc = " @note Timeslots scheduled too close will lead to a @ref NRF_EVT_RADIO_BLOCKED event."] - #[doc = " @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths."] - #[doc = " @note If an opportunity for the first radio timeslot is not found before 100 ms after the call to this"] - #[doc = " function, it is not scheduled, and instead a @ref NRF_EVT_RADIO_BLOCKED event is sent."] - #[doc = " The application may then try to schedule the first radio timeslot again."] - #[doc = " @note Successful requests will result in nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START)."] - #[doc = " Unsuccessful requests will result in a @ref NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS."] - #[doc = " @note The jitter in the start time of the radio timeslots is +/- @ref NRF_RADIO_START_JITTER_US us."] - #[doc = " @note The nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the"] - #[doc = " specified radio timeslot start, but this does not affect the actual start time of the timeslot."] - #[doc = " @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency"] - #[doc = " (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is"] - #[doc = " guaranteed to be clocked from the external crystal."] - #[doc = " @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral"] - #[doc = " during the radio timeslot."] - #[doc = ""] - #[doc = " @param[in] p_request Pointer to the request parameters."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Either:"] - #[doc = " - The session is not open."] - #[doc = " - The session is not IDLE."] - #[doc = " - This is the first request and its type is not @ref NRF_RADIO_REQ_TYPE_EARLIEST."] - #[doc = " - The request type was set to @ref NRF_RADIO_REQ_TYPE_NORMAL after a"] - #[doc = " @ref NRF_RADIO_REQ_TYPE_EARLIEST request was blocked."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid."] - #[doc = " @retval ::NRF_SUCCESS Otherwise."] - +#[doc = "@brief Requests a radio timeslot."] +#[doc = ""] +#[doc = " @note The request type is determined by p_request->request_type, and can be one of @ref NRF_RADIO_REQ_TYPE_EARLIEST"] +#[doc = " and @ref NRF_RADIO_REQ_TYPE_NORMAL. The first request in a session must always be of type @ref NRF_RADIO_REQ_TYPE_EARLIEST."] +#[doc = " @note For a normal request (@ref NRF_RADIO_REQ_TYPE_NORMAL), the start time of a radio timeslot is specified by"] +#[doc = " p_request->distance_us and is given relative to the start of the previous timeslot."] +#[doc = " @note A too small p_request->distance_us will lead to a @ref NRF_EVT_RADIO_BLOCKED event."] +#[doc = " @note Timeslots scheduled too close will lead to a @ref NRF_EVT_RADIO_BLOCKED event."] +#[doc = " @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths."] +#[doc = " @note If an opportunity for the first radio timeslot is not found before 100 ms after the call to this"] +#[doc = " function, it is not scheduled, and instead a @ref NRF_EVT_RADIO_BLOCKED event is sent."] +#[doc = " The application may then try to schedule the first radio timeslot again."] +#[doc = " @note Successful requests will result in nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START)."] +#[doc = " Unsuccessful requests will result in a @ref NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS."] +#[doc = " @note The jitter in the start time of the radio timeslots is +/- @ref NRF_RADIO_START_JITTER_US us."] +#[doc = " @note The nrf_radio_signal_callback_t(@ref NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the"] +#[doc = " specified radio timeslot start, but this does not affect the actual start time of the timeslot."] +#[doc = " @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency"] +#[doc = " (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is"] +#[doc = " guaranteed to be clocked from the external crystal."] +#[doc = " @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral"] +#[doc = " during the radio timeslot."] +#[doc = ""] +#[doc = " @param[in] p_request Pointer to the request parameters."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Either:"] +#[doc = " - The session is not open."] +#[doc = " - The session is not IDLE."] +#[doc = " - This is the first request and its type is not @ref NRF_RADIO_REQ_TYPE_EARLIEST."] +#[doc = " - The request type was set to @ref NRF_RADIO_REQ_TYPE_NORMAL after a"] +#[doc = " @ref NRF_RADIO_REQ_TYPE_EARLIEST request was blocked."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid."] +#[doc = " @retval ::NRF_SUCCESS Otherwise."] #[inline(always)] pub unsafe fn sd_radio_request(p_request: *const nrf_radio_request_t) -> u32 { let ret: u32; @@ -2897,26 +2803,24 @@ pub unsafe fn sd_radio_request(p_request: *const nrf_radio_request_t) -> u32 { ret } - - #[doc = "@brief Write register protected by the SoftDevice"] - #[doc = ""] - #[doc = " This function writes to a register that is write-protected by the SoftDevice. Please refer to your"] - #[doc = " SoftDevice Specification for more details about which registers that are protected by SoftDevice."] - #[doc = " This function can write to the following protected peripheral:"] - #[doc = " - ACL"] - #[doc = ""] - #[doc = " @note Protected registers may be read directly."] - #[doc = " @note Register that are write-once will return @ref NRF_SUCCESS on second set, even the value in"] - #[doc = " the register has not changed. See the Product Specification for more details about register"] - #[doc = " properties."] - #[doc = ""] - #[doc = " @param[in] p_register Pointer to register to be written."] - #[doc = " @param[in] value Value to be written to the register."] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR This function can not write to the reguested register."] - #[doc = " @retval ::NRF_SUCCESS Value successfully written to register."] - #[doc = ""] - +#[doc = "@brief Write register protected by the SoftDevice"] +#[doc = ""] +#[doc = " This function writes to a register that is write-protected by the SoftDevice. Please refer to your"] +#[doc = " SoftDevice Specification for more details about which registers that are protected by SoftDevice."] +#[doc = " This function can write to the following protected peripheral:"] +#[doc = " - ACL"] +#[doc = ""] +#[doc = " @note Protected registers may be read directly."] +#[doc = " @note Register that are write-once will return @ref NRF_SUCCESS on second set, even the value in"] +#[doc = " the register has not changed. See the Product Specification for more details about register"] +#[doc = " properties."] +#[doc = ""] +#[doc = " @param[in] p_register Pointer to register to be written."] +#[doc = " @param[in] value Value to be written to the register."] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR This function can not write to the reguested register."] +#[doc = " @retval ::NRF_SUCCESS Value successfully written to register."] +#[doc = ""] #[inline(always)] pub unsafe fn sd_protected_register_write(p_register: *mut u32, value: u32) -> u32 { let ret: u32; @@ -3056,40 +2960,39 @@ fn bindgen_test_layout_nrf_clock_lf_cfg_t() { pub type nrf_fault_handler_t = ::core::option::Option<unsafe extern "C" fn(id: u32, pc: u32, info: u32)>; - #[doc = "@brief Enables the SoftDevice and by extension the protocol stack."] - #[doc = ""] - #[doc = " @note Some care must be taken if a low frequency clock source is already running when calling this function:"] - #[doc = " If the LF clock has a different source then the one currently running, it will be stopped. Then, the new"] - #[doc = " clock source will be started."] - #[doc = ""] - #[doc = " @note This function has no effect when returning with an error."] - #[doc = ""] - #[doc = " @post If return code is ::NRF_SUCCESS"] - #[doc = " - SoC library and protocol stack APIs are made available."] - #[doc = " - A portion of RAM will be unavailable (see relevant SDS documentation)."] - #[doc = " - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)."] - #[doc = " - Interrupts will not arrive from protected peripherals or interrupts."] - #[doc = " - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice."] - #[doc = " - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)."] - #[doc = " - Chosen low frequency clock source will be running."] - #[doc = ""] - #[doc = " @param p_clock_lf_cfg Low frequency clock source and accuracy."] - #[doc = "If NULL the clock will be configured as an RC source with rc_ctiv = 16 and .rc_temp_ctiv = 2"] - #[doc = "In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock."] - #[doc = " @param fault_handler Callback to be invoked in case of fault, cannot be NULL."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated."] - #[doc = " @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level."] - #[doc = " @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid clock source configuration supplied in p_clock_lf_cfg."] - +#[doc = "@brief Enables the SoftDevice and by extension the protocol stack."] +#[doc = ""] +#[doc = " @note Some care must be taken if a low frequency clock source is already running when calling this function:"] +#[doc = " If the LF clock has a different source then the one currently running, it will be stopped. Then, the new"] +#[doc = " clock source will be started."] +#[doc = ""] +#[doc = " @note This function has no effect when returning with an error."] +#[doc = ""] +#[doc = " @post If return code is ::NRF_SUCCESS"] +#[doc = " - SoC library and protocol stack APIs are made available."] +#[doc = " - A portion of RAM will be unavailable (see relevant SDS documentation)."] +#[doc = " - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)."] +#[doc = " - Interrupts will not arrive from protected peripherals or interrupts."] +#[doc = " - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice."] +#[doc = " - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)."] +#[doc = " - Chosen low frequency clock source will be running."] +#[doc = ""] +#[doc = " @param p_clock_lf_cfg Low frequency clock source and accuracy."] +#[doc = "If NULL the clock will be configured as an RC source with rc_ctiv = 16 and .rc_temp_ctiv = 2"] +#[doc = "In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock."] +#[doc = " @param fault_handler Callback to be invoked in case of fault, cannot be NULL."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated."] +#[doc = " @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level."] +#[doc = " @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid clock source configuration supplied in p_clock_lf_cfg."] #[inline(always)] pub unsafe fn sd_softdevice_enable( - p_clock_lf_cfg: *const nrf_clock_lf_cfg_t, - fault_handler: nrf_fault_handler_t, - ) -> u32 { + p_clock_lf_cfg: *const nrf_clock_lf_cfg_t, + fault_handler: nrf_fault_handler_t, +) -> u32 { let ret: u32; asm!("svc 16", inout("r0") to_asm(p_clock_lf_cfg) => ret, @@ -3101,20 +3004,18 @@ pub unsafe fn sd_softdevice_enable( ret } - - #[doc = "@brief Disables the SoftDevice and by extension the protocol stack."] - #[doc = ""] - #[doc = " Idempotent function to disable the SoftDevice."] - #[doc = ""] - #[doc = " @post SoC library and protocol stack APIs are made unavailable."] - #[doc = " @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest)."] - #[doc = " @post All peripherals used by the SoftDevice will be reset to default values."] - #[doc = " @post All of RAM become available."] - #[doc = " @post All interrupts are forwarded to the application."] - #[doc = " @post LFCLK source chosen in ::sd_softdevice_enable will be left running."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Disables the SoftDevice and by extension the protocol stack."] +#[doc = ""] +#[doc = " Idempotent function to disable the SoftDevice."] +#[doc = ""] +#[doc = " @post SoC library and protocol stack APIs are made unavailable."] +#[doc = " @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest)."] +#[doc = " @post All peripherals used by the SoftDevice will be reset to default values."] +#[doc = " @post All of RAM become available."] +#[doc = " @post All interrupts are forwarded to the application."] +#[doc = " @post LFCLK source chosen in ::sd_softdevice_enable will be left running."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_softdevice_disable() -> u32 { let ret: u32; @@ -3128,13 +3029,11 @@ pub unsafe fn sd_softdevice_disable() -> u32 { ret } - - #[doc = "@brief Check if the SoftDevice is enabled."] - #[doc = ""] - #[doc = " @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Check if the SoftDevice is enabled."] +#[doc = ""] +#[doc = " @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_softdevice_is_enabled(p_softdevice_enabled: *mut u8) -> u32 { let ret: u32; @@ -3148,15 +3047,13 @@ pub unsafe fn sd_softdevice_is_enabled(p_softdevice_enabled: *mut u8) -> u32 { ret } - - #[doc = "@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice"] - #[doc = ""] - #[doc = " This function is only intended to be called when a bootloader is enabled."] - #[doc = ""] - #[doc = " @param[in] address The base address of the interrupt vector table for forwarded interrupts."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS"] - +#[doc = "@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice"] +#[doc = ""] +#[doc = " This function is only intended to be called when a bootloader is enabled."] +#[doc = ""] +#[doc = " @param[in] address The base address of the interrupt vector table for forwarded interrupts."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS"] #[inline(always)] pub unsafe fn sd_softdevice_vector_table_base_set(address: u32) -> u32 { let ret: u32; @@ -3963,29 +3860,28 @@ fn bindgen_test_layout_sd_mbr_command_t() { ); } - #[doc = "@brief Issue Master Boot Record commands"] - #[doc = ""] - #[doc = " Commands used when updating a SoftDevice and bootloader."] - #[doc = ""] - #[doc = " The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires"] - #[doc = " parameters to be retained by the MBR when resetting the IC. This is done in a separate flash"] - #[doc = " page. The location of the flash page should be provided by the application in either"] - #[doc = " @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR. If both addresses are set, the MBR"] - #[doc = " will prioritize @ref MBR_PARAM_PAGE_ADDR. This page will be cleared by the MBR and is used to"] - #[doc = " store the command before reset. When an address is specified, the page it refers to must not be"] - #[doc = " used by the application. If no address is provided by the application, i.e. both"] - #[doc = " @ref MBR_PARAM_PAGE_ADDR and @ref MBR_UICR_PARAM_PAGE_ADDR is 0xFFFFFFFF, MBR commands which use"] - #[doc = " flash will be unavailable and return @ref NRF_ERROR_NO_MEM."] - #[doc = ""] - #[doc = " @param[in] param Pointer to a struct describing the command."] - #[doc = ""] - #[doc = " @note For a complete set of return values, see ::sd_mbr_command_copy_sd_t,"] - #[doc = " ::sd_mbr_command_copy_bl_t, ::sd_mbr_command_compare_t,"] - #[doc = " ::sd_mbr_command_vector_table_base_set_t, ::sd_mbr_command_irq_forward_address_set_t"] - #[doc = ""] - #[doc = " @retval ::NRF_ERROR_NO_MEM No MBR parameter page provided"] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given."] - +#[doc = "@brief Issue Master Boot Record commands"] +#[doc = ""] +#[doc = " Commands used when updating a SoftDevice and bootloader."] +#[doc = ""] +#[doc = " The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires"] +#[doc = " parameters to be retained by the MBR when resetting the IC. This is done in a separate flash"] +#[doc = " page. The location of the flash page should be provided by the application in either"] +#[doc = " @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR. If both addresses are set, the MBR"] +#[doc = " will prioritize @ref MBR_PARAM_PAGE_ADDR. This page will be cleared by the MBR and is used to"] +#[doc = " store the command before reset. When an address is specified, the page it refers to must not be"] +#[doc = " used by the application. If no address is provided by the application, i.e. both"] +#[doc = " @ref MBR_PARAM_PAGE_ADDR and @ref MBR_UICR_PARAM_PAGE_ADDR is 0xFFFFFFFF, MBR commands which use"] +#[doc = " flash will be unavailable and return @ref NRF_ERROR_NO_MEM."] +#[doc = ""] +#[doc = " @param[in] param Pointer to a struct describing the command."] +#[doc = ""] +#[doc = " @note For a complete set of return values, see ::sd_mbr_command_copy_sd_t,"] +#[doc = " ::sd_mbr_command_copy_bl_t, ::sd_mbr_command_compare_t,"] +#[doc = " ::sd_mbr_command_vector_table_base_set_t, ::sd_mbr_command_irq_forward_address_set_t"] +#[doc = ""] +#[doc = " @retval ::NRF_ERROR_NO_MEM No MBR parameter page provided"] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given."] #[inline(always)] pub unsafe fn sd_mbr_command(param: *mut sd_mbr_command_t) -> u32 { let ret: u32; @@ -9209,34 +9105,33 @@ fn bindgen_test_layout_ble_gap_conn_event_trigger_t() { ); } - #[doc = "@brief Set the local Bluetooth identity address."] - #[doc = ""] - #[doc = " The local Bluetooth identity address is the address that identifies this device to other peers."] - #[doc = " The address type must be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC."] - #[doc = ""] - #[doc = " @note The identity address cannot be changed while advertising, scanning or creating a connection."] - #[doc = ""] - #[doc = " @note This address will be distributed to the peer during bonding."] - #[doc = " If the address changes, the address stored in the peer device will not be valid and the ability to"] - #[doc = " reconnect using the old address will be lost."] - #[doc = ""] - #[doc = " @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC upon being"] - #[doc = " enabled. The address is a random number populated during the IC manufacturing process and remains unchanged"] - #[doc = " for the lifetime of each IC."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] p_addr Pointer to address structure."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Address successfully set."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The identity address cannot be changed while advertising,"] - #[doc = " scanning or creating a connection."] - +#[doc = "@brief Set the local Bluetooth identity address."] +#[doc = ""] +#[doc = " The local Bluetooth identity address is the address that identifies this device to other peers."] +#[doc = " The address type must be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC."] +#[doc = ""] +#[doc = " @note The identity address cannot be changed while advertising, scanning or creating a connection."] +#[doc = ""] +#[doc = " @note This address will be distributed to the peer during bonding."] +#[doc = " If the address changes, the address stored in the peer device will not be valid and the ability to"] +#[doc = " reconnect using the old address will be lost."] +#[doc = ""] +#[doc = " @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC upon being"] +#[doc = " enabled. The address is a random number populated during the IC manufacturing process and remains unchanged"] +#[doc = " for the lifetime of each IC."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] p_addr Pointer to address structure."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Address successfully set."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The identity address cannot be changed while advertising,"] +#[doc = " scanning or creating a connection."] #[inline(always)] pub unsafe fn sd_ble_gap_addr_set(p_addr: *const ble_gap_addr_t) -> u32 { let ret: u32; @@ -9250,17 +9145,15 @@ pub unsafe fn sd_ble_gap_addr_set(p_addr: *const ble_gap_addr_t) -> u32 { ret } - - #[doc = "@brief Get local Bluetooth identity address."] - #[doc = ""] - #[doc = " @note This will always return the identity address irrespective of the privacy settings,"] - #[doc = " i.e. the address type will always be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC."] - #[doc = ""] - #[doc = " @param[out] p_addr Pointer to address structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Address successfully retrieved."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] - +#[doc = "@brief Get local Bluetooth identity address."] +#[doc = ""] +#[doc = " @note This will always return the identity address irrespective of the privacy settings,"] +#[doc = " i.e. the address type will always be either @ref BLE_GAP_ADDR_TYPE_PUBLIC or @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC."] +#[doc = ""] +#[doc = " @param[out] p_addr Pointer to address structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Address successfully retrieved."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_addr_get(p_addr: *mut ble_gap_addr_t) -> u32 { let ret: u32; @@ -9274,23 +9167,21 @@ pub unsafe fn sd_ble_gap_addr_get(p_addr: *mut ble_gap_addr_t) -> u32 { ret } - - #[doc = "@brief Get the Bluetooth device address used by the advertiser."] - #[doc = ""] - #[doc = " @note This function will return the local Bluetooth address used in advertising PDUs. When"] - #[doc = " using privacy, the SoftDevice will generate a new private address every"] - #[doc = " @ref ble_gap_privacy_params_t::private_addr_cycle_s configured using"] - #[doc = " @ref sd_ble_gap_privacy_set. Hence depending on when the application calls this API, the"] - #[doc = " address returned may not be the latest address that is used in the advertising PDUs."] - #[doc = ""] - #[doc = " @param[in] adv_handle The advertising handle to get the address from."] - #[doc = " @param[out] p_addr Pointer to address structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Address successfully retrieved."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising."] - +#[doc = "@brief Get the Bluetooth device address used by the advertiser."] +#[doc = ""] +#[doc = " @note This function will return the local Bluetooth address used in advertising PDUs. When"] +#[doc = " using privacy, the SoftDevice will generate a new private address every"] +#[doc = " @ref ble_gap_privacy_params_t::private_addr_cycle_s configured using"] +#[doc = " @ref sd_ble_gap_privacy_set. Hence depending on when the application calls this API, the"] +#[doc = " address returned may not be the latest address that is used in the advertising PDUs."] +#[doc = ""] +#[doc = " @param[in] adv_handle The advertising handle to get the address from."] +#[doc = " @param[out] p_addr Pointer to address structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Address successfully retrieved."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising."] #[inline(always)] pub unsafe fn sd_ble_gap_adv_addr_get(adv_handle: u8, p_addr: *mut ble_gap_addr_t) -> u32 { let ret: u32; @@ -9304,30 +9195,28 @@ pub unsafe fn sd_ble_gap_adv_addr_get(adv_handle: u8, p_addr: *mut ble_gap_addr_ ret } - - #[doc = "@brief Set the active whitelist in the SoftDevice."] - #[doc = ""] - #[doc = " @note Only one whitelist can be used at a time and the whitelist is shared between the BLE roles."] - #[doc = " The whitelist cannot be set if a BLE role is using the whitelist."] - #[doc = ""] - #[doc = " @note If an address is resolved using the information in the device identity list, then the whitelist"] - #[doc = " filter policy applies to the peer identity address and not the resolvable address sent on air."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] pp_wl_addrs Pointer to a whitelist of peer addresses, if NULL the whitelist will be cleared."] - #[doc = " @param[in] len Length of the whitelist, maximum @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The whitelist is successfully set/cleared."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR The whitelist (or one of its entries) provided is invalid."] - #[doc = " @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE The whitelist is in use by a BLE role and cannot be set or cleared."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE The given whitelist size is invalid (zero or too large); this can only return when"] - #[doc = " pp_wl_addrs is not NULL."] - +#[doc = "@brief Set the active whitelist in the SoftDevice."] +#[doc = ""] +#[doc = " @note Only one whitelist can be used at a time and the whitelist is shared between the BLE roles."] +#[doc = " The whitelist cannot be set if a BLE role is using the whitelist."] +#[doc = ""] +#[doc = " @note If an address is resolved using the information in the device identity list, then the whitelist"] +#[doc = " filter policy applies to the peer identity address and not the resolvable address sent on air."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] pp_wl_addrs Pointer to a whitelist of peer addresses, if NULL the whitelist will be cleared."] +#[doc = " @param[in] len Length of the whitelist, maximum @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The whitelist is successfully set/cleared."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR The whitelist (or one of its entries) provided is invalid."] +#[doc = " @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE The whitelist is in use by a BLE role and cannot be set or cleared."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE The given whitelist size is invalid (zero or too large); this can only return when"] +#[doc = " pp_wl_addrs is not NULL."] #[inline(always)] pub unsafe fn sd_ble_gap_whitelist_set(pp_wl_addrs: *const *const ble_gap_addr_t, len: u8) -> u32 { let ret: u32; @@ -9341,41 +9230,39 @@ pub unsafe fn sd_ble_gap_whitelist_set(pp_wl_addrs: *const *const ble_gap_addr_t ret } - - #[doc = "@brief Set device identity list."] - #[doc = ""] - #[doc = " @note Only one device identity list can be used at a time and the list is shared between the BLE roles."] - #[doc = " The device identity list cannot be set if a BLE role is using the list."] - #[doc = ""] - #[doc = " @param[in] pp_id_keys Pointer to an array of peer identity addresses and peer IRKs, if NULL the device identity list will be cleared."] - #[doc = " @param[in] pp_local_irks Pointer to an array of local IRKs. Each entry in the array maps to the entry in pp_id_keys at the same index."] - #[doc = " To fill in the list with the currently set device IRK for all peers, set to NULL."] - #[doc = " @param[in] len Length of the device identity list, maximum @ref BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The device identity list successfully set/cleared."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR The device identity list (or one of its entries) provided is invalid."] - #[doc = " This code may be returned if the local IRK list also has an invalid entry."] - #[doc = " @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE The device identity list is in use and cannot be set or cleared."] - #[doc = " @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE The device identity list contains multiple entries with the same identity address."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE The given device identity list size invalid (zero or too large); this can"] - #[doc = " only return when pp_id_keys is not NULL."] - +#[doc = "@brief Set device identity list."] +#[doc = ""] +#[doc = " @note Only one device identity list can be used at a time and the list is shared between the BLE roles."] +#[doc = " The device identity list cannot be set if a BLE role is using the list."] +#[doc = ""] +#[doc = " @param[in] pp_id_keys Pointer to an array of peer identity addresses and peer IRKs, if NULL the device identity list will be cleared."] +#[doc = " @param[in] pp_local_irks Pointer to an array of local IRKs. Each entry in the array maps to the entry in pp_id_keys at the same index."] +#[doc = " To fill in the list with the currently set device IRK for all peers, set to NULL."] +#[doc = " @param[in] len Length of the device identity list, maximum @ref BLE_GAP_DEVICE_IDENTITIES_MAX_COUNT."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_PRIVATE_SCAN_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The device identity list successfully set/cleared."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR The device identity list (or one of its entries) provided is invalid."] +#[doc = " This code may be returned if the local IRK list also has an invalid entry."] +#[doc = " @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_IN_USE The device identity list is in use and cannot be set or cleared."] +#[doc = " @retval ::BLE_ERROR_GAP_DEVICE_IDENTITIES_DUPLICATE The device identity list contains multiple entries with the same identity address."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE The given device identity list size invalid (zero or too large); this can"] +#[doc = " only return when pp_id_keys is not NULL."] #[inline(always)] pub unsafe fn sd_ble_gap_device_identities_set( - pp_id_keys: *const *const ble_gap_id_key_t, - pp_local_irks: *const *const ble_gap_irk_t, - len: u8, - ) -> u32 { + pp_id_keys: *const *const ble_gap_id_key_t, + pp_local_irks: *const *const ble_gap_irk_t, + len: u8, +) -> u32 { let ret: u32; asm!("svc 111", inout("r0") to_asm(pp_id_keys) => ret, @@ -9387,32 +9274,30 @@ pub unsafe fn sd_ble_gap_device_identities_set( ret } - - #[doc = "@brief Set privacy settings."] - #[doc = ""] - #[doc = " @note Privacy settings cannot be changed while advertising, scanning or creating a connection."] - #[doc = ""] - #[doc = " @param[in] p_privacy_params Privacy settings."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Set successfully."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR The pointer to privacy settings is NULL or invalid."] - #[doc = " Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Out of range parameters are provided."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The SoftDevice does not support privacy if the Central Address Resolution"] - #[doc = "characteristic is not configured to be included and the SoftDevice is configured"] - #[doc = "to support central roles."] - #[doc = "See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Privacy settings cannot be changed while advertising, scanning"] - #[doc = " or creating a connection."] - +#[doc = "@brief Set privacy settings."] +#[doc = ""] +#[doc = " @note Privacy settings cannot be changed while advertising, scanning or creating a connection."] +#[doc = ""] +#[doc = " @param[in] p_privacy_params Privacy settings."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_SCAN_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Set successfully."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address type is supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR The pointer to privacy settings is NULL or invalid."] +#[doc = " Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Out of range parameters are provided."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The SoftDevice does not support privacy if the Central Address Resolution"] +#[doc = "characteristic is not configured to be included and the SoftDevice is configured"] +#[doc = "to support central roles."] +#[doc = "See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Privacy settings cannot be changed while advertising, scanning"] +#[doc = " or creating a connection."] #[inline(always)] pub unsafe fn sd_ble_gap_privacy_set(p_privacy_params: *const ble_gap_privacy_params_t) -> u32 { let ret: u32; @@ -9426,18 +9311,16 @@ pub unsafe fn sd_ble_gap_privacy_set(p_privacy_params: *const ble_gap_privacy_pa ret } - - #[doc = "@brief Get privacy settings."] - #[doc = ""] - #[doc = " @note ::ble_gap_privacy_params_t::p_device_irk must be initialized to NULL or a valid address before this function is called."] - #[doc = " If it is initialized to a valid address, the address pointed to will contain the current device IRK on return."] - #[doc = ""] - #[doc = " @param[in,out] p_privacy_params Privacy settings."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Privacy settings read."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR The pointer given for returning the privacy settings may be NULL or invalid."] - #[doc = " Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer."] - +#[doc = "@brief Get privacy settings."] +#[doc = ""] +#[doc = " @note ::ble_gap_privacy_params_t::p_device_irk must be initialized to NULL or a valid address before this function is called."] +#[doc = " If it is initialized to a valid address, the address pointed to will contain the current device IRK on return."] +#[doc = ""] +#[doc = " @param[in,out] p_privacy_params Privacy settings."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Privacy settings read."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR The pointer given for returning the privacy settings may be NULL or invalid."] +#[doc = " Otherwise, the p_device_irk pointer in privacy parameter is an invalid pointer."] #[inline(always)] pub unsafe fn sd_ble_gap_privacy_get(p_privacy_params: *mut ble_gap_privacy_params_t) -> u32 { let ret: u32; @@ -9451,57 +9334,55 @@ pub unsafe fn sd_ble_gap_privacy_get(p_privacy_params: *mut ble_gap_privacy_para ret } - - #[doc = "@brief Configure an advertising set. Set, clear or update advertising and scan response data."] - #[doc = ""] - #[doc = " @note The format of the advertising data will be checked by this call to ensure interoperability."] - #[doc = " Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and"] - #[doc = " duplicating the local name in the advertising data and scan response data."] - #[doc = ""] - #[doc = " @note In order to update advertising data while advertising, new advertising buffers must be provided."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in,out] p_adv_handle Provide a pointer to a handle containing @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to configure"] - #[doc = " a new advertising set. On success, a new handle is then returned through the pointer."] - #[doc = " Provide a pointer to an existing advertising handle to configure an existing advertising set."] - #[doc = " @param[in] p_adv_data Advertising data. If set to NULL, no advertising data will be used. See @ref ble_gap_adv_data_t."] - #[doc = " @param[in] p_adv_params Advertising parameters. When this function is used to update advertising data while advertising,"] - #[doc = " this parameter must be NULL. See @ref ble_gap_adv_params_t."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Advertising set successfully configured."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied:"] - #[doc = " - Invalid advertising data configuration specified. See @ref ble_gap_adv_data_t."] - #[doc = " - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t."] - #[doc = " - Use of whitelist requested but whitelist has not been set,"] - #[doc = " see @ref sd_ble_gap_whitelist_set."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR ble_gap_adv_params_t::p_peer_addr is invalid."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - It is invalid to provide non-NULL advertising set parameters while advertising."] - #[doc = " - It is invalid to provide the same data buffers while advertising. To update"] - #[doc = " advertising data, provide new advertising buffers."] - #[doc = " @retval ::BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible."] - #[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. Use @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to"] - #[doc = " configure a new advertising handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_DATA Invalid data type(s) supplied. Check the advertising data format specification"] - #[doc = " given in Bluetooth Specification Version 5.0, Volume 3, Part C, Chapter 11."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported data length or advertising parameter configuration."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to configure a new advertising handle. Update an"] - #[doc = " existing advertising handle instead."] - #[doc = " @retval ::BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied."] - +#[doc = "@brief Configure an advertising set. Set, clear or update advertising and scan response data."] +#[doc = ""] +#[doc = " @note The format of the advertising data will be checked by this call to ensure interoperability."] +#[doc = " Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and"] +#[doc = " duplicating the local name in the advertising data and scan response data."] +#[doc = ""] +#[doc = " @note In order to update advertising data while advertising, new advertising buffers must be provided."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in,out] p_adv_handle Provide a pointer to a handle containing @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to configure"] +#[doc = " a new advertising set. On success, a new handle is then returned through the pointer."] +#[doc = " Provide a pointer to an existing advertising handle to configure an existing advertising set."] +#[doc = " @param[in] p_adv_data Advertising data. If set to NULL, no advertising data will be used. See @ref ble_gap_adv_data_t."] +#[doc = " @param[in] p_adv_params Advertising parameters. When this function is used to update advertising data while advertising,"] +#[doc = " this parameter must be NULL. See @ref ble_gap_adv_params_t."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Advertising set successfully configured."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied:"] +#[doc = " - Invalid advertising data configuration specified. See @ref ble_gap_adv_data_t."] +#[doc = " - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t."] +#[doc = " - Use of whitelist requested but whitelist has not been set,"] +#[doc = " see @ref sd_ble_gap_whitelist_set."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR ble_gap_adv_params_t::p_peer_addr is invalid."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - It is invalid to provide non-NULL advertising set parameters while advertising."] +#[doc = " - It is invalid to provide the same data buffers while advertising. To update"] +#[doc = " advertising data, provide new advertising buffers."] +#[doc = " @retval ::BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible."] +#[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. Use @ref BLE_GAP_ADV_SET_HANDLE_NOT_SET to"] +#[doc = " configure a new advertising handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_DATA Invalid data type(s) supplied. Check the advertising data format specification"] +#[doc = " given in Bluetooth Specification Version 5.0, Volume 3, Part C, Chapter 11."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported data length or advertising parameter configuration."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to configure a new advertising handle. Update an"] +#[doc = " existing advertising handle instead."] +#[doc = " @retval ::BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_adv_set_configure( - p_adv_handle: *mut u8, - p_adv_data: *const ble_gap_adv_data_t, - p_adv_params: *const ble_gap_adv_params_t, - ) -> u32 { + p_adv_handle: *mut u8, + p_adv_data: *const ble_gap_adv_data_t, + p_adv_params: *const ble_gap_adv_params_t, +) -> u32 { let ret: u32; asm!("svc 114", inout("r0") to_asm(p_adv_handle) => ret, @@ -9513,50 +9394,48 @@ pub unsafe fn sd_ble_gap_adv_set_configure( ret } - - #[doc = "@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure)."] - #[doc = ""] - #[doc = " @note Only one advertiser may be active at any time."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_CONNECTED, Generated after connection has been established through connectable advertising.}"] - #[doc = " @event{@ref BLE_GAP_EVT_ADV_SET_TERMINATED, Advertising set has terminated.}"] - #[doc = " @event{@ref BLE_GAP_EVT_SCAN_REQ_REPORT, A scan request was received.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] adv_handle Advertising handle to advertise on, received from @ref sd_ble_gap_adv_set_configure."] - #[doc = " @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or"] - #[doc = " @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. For non-connectable"] - #[doc = " advertising, this is ignored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The BLE stack has started advertising."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE adv_handle is not configured or already advertising."] - #[doc = " @retval ::NRF_ERROR_CONN_COUNT The limit of available connections for this connection configuration"] - #[doc = " tag has been reached; connectable advertiser cannot be started."] - #[doc = " To increase the number of available connections,"] - #[doc = " use @ref sd_ble_cfg_set with @ref BLE_GAP_CFG_ROLE_COUNT or @ref BLE_CONN_CFG_GAP."] - #[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. Configure a new adveriting handle with @ref sd_ble_gap_adv_set_configure."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied:"] - #[doc = " - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t."] - #[doc = " - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Either:"] - #[doc = " - adv_handle is configured with connectable advertising, but the event_length parameter"] - #[doc = " associated with conn_cfg_tag is too small to be able to establish a connection on"] - #[doc = " the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length."] - #[doc = " - Not enough BLE role slots available."] - #[doc = "Stop one or more currently active roles (Central, Peripheral, Broadcaster or Observer) and try again."] - #[doc = " - p_adv_params is configured with connectable advertising, but the event_length parameter"] - #[doc = " associated with conn_cfg_tag is too small to be able to establish a connection on"] - #[doc = " the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length."] - +#[doc = "@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure)."] +#[doc = ""] +#[doc = " @note Only one advertiser may be active at any time."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_CONNECTED, Generated after connection has been established through connectable advertising.}"] +#[doc = " @event{@ref BLE_GAP_EVT_ADV_SET_TERMINATED, Advertising set has terminated.}"] +#[doc = " @event{@ref BLE_GAP_EVT_SCAN_REQ_REPORT, A scan request was received.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_CONN_PRIV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PRIVACY_ADV_DIR_PRIV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] adv_handle Advertising handle to advertise on, received from @ref sd_ble_gap_adv_set_configure."] +#[doc = " @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or"] +#[doc = " @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration. For non-connectable"] +#[doc = " advertising, this is ignored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The BLE stack has started advertising."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE adv_handle is not configured or already advertising."] +#[doc = " @retval ::NRF_ERROR_CONN_COUNT The limit of available connections for this connection configuration"] +#[doc = " tag has been reached; connectable advertiser cannot be started."] +#[doc = " To increase the number of available connections,"] +#[doc = " use @ref sd_ble_cfg_set with @ref BLE_GAP_CFG_ROLE_COUNT or @ref BLE_CONN_CFG_GAP."] +#[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found. Configure a new adveriting handle with @ref sd_ble_gap_adv_set_configure."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied:"] +#[doc = " - Invalid configuration of p_adv_params. See @ref ble_gap_adv_params_t."] +#[doc = " - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Either:"] +#[doc = " - adv_handle is configured with connectable advertising, but the event_length parameter"] +#[doc = " associated with conn_cfg_tag is too small to be able to establish a connection on"] +#[doc = " the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length."] +#[doc = " - Not enough BLE role slots available."] +#[doc = "Stop one or more currently active roles (Central, Peripheral, Broadcaster or Observer) and try again."] +#[doc = " - p_adv_params is configured with connectable advertising, but the event_length parameter"] +#[doc = " associated with conn_cfg_tag is too small to be able to establish a connection on"] +#[doc = " the selected advertising phys. Use @ref sd_ble_cfg_set to increase the event length."] #[inline(always)] pub unsafe fn sd_ble_gap_adv_start(adv_handle: u8, conn_cfg_tag: u8) -> u32 { let ret: u32; @@ -9570,20 +9449,18 @@ pub unsafe fn sd_ble_gap_adv_start(adv_handle: u8, conn_cfg_tag: u8) -> u32 { ret } - - #[doc = "@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure)."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] adv_handle The advertising handle that should stop advertising."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The BLE stack has stopped advertising."] - #[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Invalid advertising handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The advertising handle is not advertising."] - +#[doc = "@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure)."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_ADV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] adv_handle The advertising handle that should stop advertising."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The BLE stack has stopped advertising."] +#[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Invalid advertising handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The advertising handle is not advertising."] #[inline(always)] pub unsafe fn sd_ble_gap_adv_stop(adv_handle: u8) -> u32 { let ret: u32; @@ -9597,46 +9474,44 @@ pub unsafe fn sd_ble_gap_adv_stop(adv_handle: u8) -> u32 { ret } - - #[doc = "@brief Update connection parameters."] - #[doc = ""] - #[doc = " @details In the central role this will initiate a Link Layer connection parameter update procedure,"] - #[doc = " otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for"] - #[doc = " the central to perform the procedure. In both cases, and regardless of success or failure, the application"] - #[doc = " will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event."] - #[doc = ""] - #[doc = " @details This function can be used as a central both to reply to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST or to start the procedure unrequested."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_CONN_PARAM_UPDATE, Result of the connection parameter update procedure.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CPU_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CPU_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CPU_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role,"] - #[doc = " the parameters in the PPCP characteristic of the GAP service will be used instead."] - #[doc = " If NULL is provided on a central role and in response to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, the peripheral request will be rejected"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The Connection Update procedure has been started successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established."] - #[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress, wait for pending procedures to complete and retry."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - +#[doc = "@brief Update connection parameters."] +#[doc = ""] +#[doc = " @details In the central role this will initiate a Link Layer connection parameter update procedure,"] +#[doc = " otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for"] +#[doc = " the central to perform the procedure. In both cases, and regardless of success or failure, the application"] +#[doc = " will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event."] +#[doc = ""] +#[doc = " @details This function can be used as a central both to reply to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST or to start the procedure unrequested."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_CONN_PARAM_UPDATE, Result of the connection parameter update procedure.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CPU_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CPU_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CPU_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role,"] +#[doc = " the parameters in the PPCP characteristic of the GAP service will be used instead."] +#[doc = " If NULL is provided on a central role and in response to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, the peripheral request will be rejected"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The Connection Update procedure has been started successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established."] +#[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress, wait for pending procedures to complete and retry."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] #[inline(always)] pub unsafe fn sd_ble_gap_conn_param_update( - conn_handle: u16, - p_conn_params: *const ble_gap_conn_params_t, - ) -> u32 { + conn_handle: u16, + p_conn_params: *const ble_gap_conn_params_t, +) -> u32 { let ret: u32; asm!("svc 117", inout("r0") to_asm(conn_handle) => ret, @@ -9648,28 +9523,26 @@ pub unsafe fn sd_ble_gap_conn_param_update( ret } - - #[doc = "@brief Disconnect (GAP Link Termination)."] - #[doc = ""] - #[doc = " @details This call initiates the disconnection procedure, and its completion will be communicated to the application"] - #[doc = " with a @ref BLE_GAP_EVT_DISCONNECTED event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_DISCONNECTED, Generated when disconnection procedure is complete.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CONN_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are @ref BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION and @ref BLE_HCI_CONN_INTERVAL_UNACCEPTABLE)."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The disconnection procedure has been started successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established."] - +#[doc = "@brief Disconnect (GAP Link Termination)."] +#[doc = ""] +#[doc = " @details This call initiates the disconnection procedure, and its completion will be communicated to the application"] +#[doc = " with a @ref BLE_GAP_EVT_DISCONNECTED event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_DISCONNECTED, Generated when disconnection procedure is complete.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CONN_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are @ref BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION and @ref BLE_HCI_CONN_INTERVAL_UNACCEPTABLE)."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The disconnection procedure has been started successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress or link has not been established."] #[inline(always)] pub unsafe fn sd_ble_gap_disconnect(conn_handle: u16, hci_status_code: u8) -> u32 { let ret: u32; @@ -9683,29 +9556,27 @@ pub unsafe fn sd_ble_gap_disconnect(conn_handle: u16, hci_status_code: u8) -> u3 ret } - - #[doc = "@brief Set the radio's transmit power."] - #[doc = ""] - #[doc = " @param[in] role The role to set the transmit power for, see @ref BLE_GAP_TX_POWER_ROLES for"] - #[doc = " possible roles."] - #[doc = " @param[in] handle The handle parameter is interpreted depending on role:"] - #[doc = " - If role is @ref BLE_GAP_TX_POWER_ROLE_CONN, this value is the specific connection handle."] - #[doc = " - If role is @ref BLE_GAP_TX_POWER_ROLE_ADV, the advertising set identified with the advertising handle,"] - #[doc = " will use the specified transmit power, and include it in the advertising packet headers if"] - #[doc = " @ref ble_gap_adv_properties_t::include_tx_power set."] - #[doc = " - For all other roles handle is ignored."] - #[doc = " @param[in] tx_power Radio transmit power in dBm (see note for accepted values)."] - #[doc = ""] - #[doc = " @note Supported tx_power values: -40dBm, -20dBm, -16dBm, -12dBm, -8dBm, -4dBm, 0dBm, +2dBm, +3dBm, +4dBm, +5dBm, +6dBm, +7dBm and +8dBm."] - #[doc = " @note The initiator will have the same transmit power as the scanner."] - #[doc = " @note When a connection is created it will inherit the transmit power from the initiator or"] - #[doc = " advertiser leading to the connection."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully changed the transmit power."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Set the radio's transmit power."] +#[doc = ""] +#[doc = " @param[in] role The role to set the transmit power for, see @ref BLE_GAP_TX_POWER_ROLES for"] +#[doc = " possible roles."] +#[doc = " @param[in] handle The handle parameter is interpreted depending on role:"] +#[doc = " - If role is @ref BLE_GAP_TX_POWER_ROLE_CONN, this value is the specific connection handle."] +#[doc = " - If role is @ref BLE_GAP_TX_POWER_ROLE_ADV, the advertising set identified with the advertising handle,"] +#[doc = " will use the specified transmit power, and include it in the advertising packet headers if"] +#[doc = " @ref ble_gap_adv_properties_t::include_tx_power set."] +#[doc = " - For all other roles handle is ignored."] +#[doc = " @param[in] tx_power Radio transmit power in dBm (see note for accepted values)."] +#[doc = ""] +#[doc = " @note Supported tx_power values: -40dBm, -20dBm, -16dBm, -12dBm, -8dBm, -4dBm, 0dBm, +2dBm, +3dBm, +4dBm, +5dBm, +6dBm, +7dBm and +8dBm."] +#[doc = " @note The initiator will have the same transmit power as the scanner."] +#[doc = " @note When a connection is created it will inherit the transmit power from the initiator or"] +#[doc = " advertiser leading to the connection."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully changed the transmit power."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_ADV_HANDLE Advertising handle not found."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_tx_power_set(role: u8, handle: u16, tx_power: i8) -> u32 { let ret: u32; @@ -9719,14 +9590,12 @@ pub unsafe fn sd_ble_gap_tx_power_set(role: u8, handle: u16, tx_power: i8) -> u3 ret } - - #[doc = "@brief Set GAP Appearance value."] - #[doc = ""] - #[doc = " @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Appearance value set successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - +#[doc = "@brief Set GAP Appearance value."] +#[doc = ""] +#[doc = " @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Appearance value set successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_appearance_set(appearance: u16) -> u32 { let ret: u32; @@ -9740,14 +9609,12 @@ pub unsafe fn sd_ble_gap_appearance_set(appearance: u16) -> u32 { ret } - - #[doc = "@brief Get GAP Appearance value."] - #[doc = ""] - #[doc = " @param[out] p_appearance Pointer to appearance (16-bit) to be filled in, see @ref BLE_APPEARANCES."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Appearance value retrieved successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - +#[doc = "@brief Get GAP Appearance value."] +#[doc = ""] +#[doc = " @param[out] p_appearance Pointer to appearance (16-bit) to be filled in, see @ref BLE_APPEARANCES."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Appearance value retrieved successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_appearance_get(p_appearance: *mut u16) -> u32 { let ret: u32; @@ -9761,17 +9628,15 @@ pub unsafe fn sd_ble_gap_appearance_get(p_appearance: *mut u16) -> u32 { ret } - - #[doc = "@brief Set GAP Peripheral Preferred Connection Parameters."] - #[doc = ""] - #[doc = " @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The characteristic is not included in the Attribute Table,"] - #[doc = "see @ref ble_gap_cfg_ppcp_incl_cfg_t."] - +#[doc = "@brief Set GAP Peripheral Preferred Connection Parameters."] +#[doc = ""] +#[doc = " @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The characteristic is not included in the Attribute Table,"] +#[doc = "see @ref ble_gap_cfg_ppcp_incl_cfg_t."] #[inline(always)] pub unsafe fn sd_ble_gap_ppcp_set(p_conn_params: *const ble_gap_conn_params_t) -> u32 { let ret: u32; @@ -9785,16 +9650,14 @@ pub unsafe fn sd_ble_gap_ppcp_set(p_conn_params: *const ble_gap_conn_params_t) - ret } - - #[doc = "@brief Get GAP Peripheral Preferred Connection Parameters."] - #[doc = ""] - #[doc = " @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The characteristic is not included in the Attribute Table,"] - #[doc = "see @ref ble_gap_cfg_ppcp_incl_cfg_t."] - +#[doc = "@brief Get GAP Peripheral Preferred Connection Parameters."] +#[doc = ""] +#[doc = " @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The characteristic is not included in the Attribute Table,"] +#[doc = "see @ref ble_gap_cfg_ppcp_incl_cfg_t."] #[inline(always)] pub unsafe fn sd_ble_gap_ppcp_get(p_conn_params: *mut ble_gap_conn_params_t) -> u32 { let ret: u32; @@ -9808,28 +9671,26 @@ pub unsafe fn sd_ble_gap_ppcp_get(p_conn_params: *mut ble_gap_conn_params_t) -> ret } - - #[doc = "@brief Set GAP device name."] - #[doc = ""] - #[doc = " @note If the device name is located in application flash memory (see @ref ble_gap_cfg_device_name_t),"] - #[doc = " it cannot be changed. Then @ref NRF_ERROR_FORBIDDEN will be returned."] - #[doc = ""] - #[doc = " @param[in] p_write_perm Write permissions for the Device Name characteristic, see @ref ble_gap_conn_sec_mode_t."] - #[doc = " @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string."] - #[doc = " @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN)."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS GAP device name and permissions set successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Device name is not writable."] - +#[doc = "@brief Set GAP device name."] +#[doc = ""] +#[doc = " @note If the device name is located in application flash memory (see @ref ble_gap_cfg_device_name_t),"] +#[doc = " it cannot be changed. Then @ref NRF_ERROR_FORBIDDEN will be returned."] +#[doc = ""] +#[doc = " @param[in] p_write_perm Write permissions for the Device Name characteristic, see @ref ble_gap_conn_sec_mode_t."] +#[doc = " @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string."] +#[doc = " @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN)."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS GAP device name and permissions set successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Device name is not writable."] #[inline(always)] pub unsafe fn sd_ble_gap_device_name_set( - p_write_perm: *const ble_gap_conn_sec_mode_t, - p_dev_name: *const u8, - len: u16, - ) -> u32 { + p_write_perm: *const ble_gap_conn_sec_mode_t, + p_dev_name: *const u8, + len: u16, +) -> u32 { let ret: u32; asm!("svc 124", inout("r0") to_asm(p_write_perm) => ret, @@ -9841,21 +9702,19 @@ pub unsafe fn sd_ble_gap_device_name_set( ret } - - #[doc = "@brief Get GAP device name."] - #[doc = ""] - #[doc = " @note If the device name is longer than the size of the supplied buffer,"] - #[doc = " p_len will return the complete device name length,"] - #[doc = " and not the number of bytes actually returned in p_dev_name."] - #[doc = " The application may use this information to allocate a suitable buffer size."] - #[doc = ""] - #[doc = " @param[out] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length."] - #[doc = " @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS GAP device name retrieved successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] - +#[doc = "@brief Get GAP device name."] +#[doc = ""] +#[doc = " @note If the device name is longer than the size of the supplied buffer,"] +#[doc = " p_len will return the complete device name length,"] +#[doc = " and not the number of bytes actually returned in p_dev_name."] +#[doc = " The application may use this information to allocate a suitable buffer size."] +#[doc = ""] +#[doc = " @param[out] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length."] +#[doc = " @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS GAP device name retrieved successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_device_name_get(p_dev_name: *mut u8, p_len: *mut u16) -> u32 { let ret: u32; @@ -9869,65 +9728,63 @@ pub unsafe fn sd_ble_gap_device_name_get(p_dev_name: *mut u8, p_len: *mut u16) - ret } - - #[doc = "@brief Initiate the GAP Authentication procedure."] - #[doc = ""] - #[doc = " @details In the central role, this function will send an SMP Pairing Request (or an SMP Pairing Failed if rejected),"] - #[doc = " otherwise in the peripheral role, an SMP Security Request will be sent."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{Depending on the security parameters set and the packet exchanges with the peer\\, the following events may be generated:}"] - #[doc = " @event{@ref BLE_GAP_EVT_SEC_PARAMS_REQUEST}"] - #[doc = " @event{@ref BLE_GAP_EVT_SEC_INFO_REQUEST}"] - #[doc = " @event{@ref BLE_GAP_EVT_PASSKEY_DISPLAY}"] - #[doc = " @event{@ref BLE_GAP_EVT_KEY_PRESSED}"] - #[doc = " @event{@ref BLE_GAP_EVT_AUTH_KEY_REQUEST}"] - #[doc = " @event{@ref BLE_GAP_EVT_LESC_DHKEY_REQUEST}"] - #[doc = " @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE}"] - #[doc = " @event{@ref BLE_GAP_EVT_AUTH_STATUS}"] - #[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_SEC_REQ_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing or bonding procedure."] - #[doc = " In the peripheral role, only the bond, mitm, lesc and keypress fields of this structure are used."] - #[doc = " In the central role, this pointer may be NULL to reject a Security Request."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully initiated authentication procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - No link has been established."] - #[doc = " - An encryption is already executing or queued."] - #[doc = " @retval ::NRF_ERROR_NO_MEM The maximum number of authentication procedures that can run in parallel for the given role is reached."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported."] - #[doc = " Distribution of own Identity Information is only supported if the Central"] - #[doc = " Address Resolution characteristic is configured to be included or"] - #[doc = " the Softdevice is configured to support peripheral roles only."] - #[doc = " See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT A SMP timeout has occurred, and further SMP operations on this link is prohibited."] - +#[doc = "@brief Initiate the GAP Authentication procedure."] +#[doc = ""] +#[doc = " @details In the central role, this function will send an SMP Pairing Request (or an SMP Pairing Failed if rejected),"] +#[doc = " otherwise in the peripheral role, an SMP Security Request will be sent."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{Depending on the security parameters set and the packet exchanges with the peer\\, the following events may be generated:}"] +#[doc = " @event{@ref BLE_GAP_EVT_SEC_PARAMS_REQUEST}"] +#[doc = " @event{@ref BLE_GAP_EVT_SEC_INFO_REQUEST}"] +#[doc = " @event{@ref BLE_GAP_EVT_PASSKEY_DISPLAY}"] +#[doc = " @event{@ref BLE_GAP_EVT_KEY_PRESSED}"] +#[doc = " @event{@ref BLE_GAP_EVT_AUTH_KEY_REQUEST}"] +#[doc = " @event{@ref BLE_GAP_EVT_LESC_DHKEY_REQUEST}"] +#[doc = " @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE}"] +#[doc = " @event{@ref BLE_GAP_EVT_AUTH_STATUS}"] +#[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_SEC_REQ_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing or bonding procedure."] +#[doc = " In the peripheral role, only the bond, mitm, lesc and keypress fields of this structure are used."] +#[doc = " In the central role, this pointer may be NULL to reject a Security Request."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully initiated authentication procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - No link has been established."] +#[doc = " - An encryption is already executing or queued."] +#[doc = " @retval ::NRF_ERROR_NO_MEM The maximum number of authentication procedures that can run in parallel for the given role is reached."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported."] +#[doc = " Distribution of own Identity Information is only supported if the Central"] +#[doc = " Address Resolution characteristic is configured to be included or"] +#[doc = " the Softdevice is configured to support peripheral roles only."] +#[doc = " See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT A SMP timeout has occurred, and further SMP operations on this link is prohibited."] #[inline(always)] pub unsafe fn sd_ble_gap_authenticate( - conn_handle: u16, - p_sec_params: *const ble_gap_sec_params_t, - ) -> u32 { + conn_handle: u16, + p_sec_params: *const ble_gap_sec_params_t, +) -> u32 { let ret: u32; asm!("svc 126", inout("r0") to_asm(conn_handle) => ret, @@ -9939,74 +9796,72 @@ pub unsafe fn sd_ble_gap_authenticate( ret } - - #[doc = "@brief Reply with GAP security parameters."] - #[doc = ""] - #[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] - #[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{This function is used during authentication procedures, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS."] - #[doc = " @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure. In the central role this must be set to NULL, as the parameters have"] - #[doc = " already been provided during a previous call to @ref sd_ble_gap_authenticate."] - #[doc = " @param[in,out] p_sec_keyset Pointer to a @ref ble_gap_sec_keyset_t security keyset structure. Any keys generated and/or distributed as a result of the ongoing security procedure"] - #[doc = " will be stored into the memory referenced by the pointers inside this structure. The keys will be stored and available to the application"] - #[doc = " upon reception of a @ref BLE_GAP_EVT_AUTH_STATUS event."] - #[doc = " Note that the SoftDevice expects the application to provide memory for storing the"] - #[doc = " peer's keys. So it must be ensured that the relevant pointers inside this structure are not NULL. The pointers to the local key"] - #[doc = " can, however, be NULL, in which case, the local key data will not be available to the application upon reception of the"] - #[doc = " @ref BLE_GAP_EVT_AUTH_STATUS event."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully accepted security parameter from the application."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Security parameters has not been requested."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported."] - #[doc = " Distribution of own Identity Information is only supported if the Central"] - #[doc = " Address Resolution characteristic is configured to be included or"] - #[doc = " the Softdevice is configured to support peripheral roles only."] - #[doc = " See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] - +#[doc = "@brief Reply with GAP security parameters."] +#[doc = ""] +#[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] +#[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{This function is used during authentication procedures, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS."] +#[doc = " @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure. In the central role this must be set to NULL, as the parameters have"] +#[doc = " already been provided during a previous call to @ref sd_ble_gap_authenticate."] +#[doc = " @param[in,out] p_sec_keyset Pointer to a @ref ble_gap_sec_keyset_t security keyset structure. Any keys generated and/or distributed as a result of the ongoing security procedure"] +#[doc = " will be stored into the memory referenced by the pointers inside this structure. The keys will be stored and available to the application"] +#[doc = " upon reception of a @ref BLE_GAP_EVT_AUTH_STATUS event."] +#[doc = " Note that the SoftDevice expects the application to provide memory for storing the"] +#[doc = " peer's keys. So it must be ensured that the relevant pointers inside this structure are not NULL. The pointers to the local key"] +#[doc = " can, however, be NULL, in which case, the local key data will not be available to the application upon reception of the"] +#[doc = " @ref BLE_GAP_EVT_AUTH_STATUS event."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully accepted security parameter from the application."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Security parameters has not been requested."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported."] +#[doc = " Distribution of own Identity Information is only supported if the Central"] +#[doc = " Address Resolution characteristic is configured to be included or"] +#[doc = " the Softdevice is configured to support peripheral roles only."] +#[doc = " See @ref ble_gap_cfg_car_incl_cfg_t and @ref ble_gap_cfg_role_count_t."] #[inline(always)] pub unsafe fn sd_ble_gap_sec_params_reply( - conn_handle: u16, - sec_status: u8, - p_sec_params: *const ble_gap_sec_params_t, - p_sec_keyset: *const ble_gap_sec_keyset_t, - ) -> u32 { + conn_handle: u16, + sec_status: u8, + p_sec_params: *const ble_gap_sec_params_t, + p_sec_keyset: *const ble_gap_sec_keyset_t, +) -> u32 { let ret: u32; asm!("svc 127", inout("r0") to_asm(conn_handle) => ret, @@ -10018,38 +9873,36 @@ pub unsafe fn sd_ble_gap_sec_params_reply( ret } - - #[doc = "@brief Reply with an authentication key."] - #[doc = ""] - #[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST or a @ref BLE_GAP_EVT_PASSKEY_DISPLAY, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] - #[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES."] - #[doc = " @param[in] p_key If key type is @ref BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL."] - #[doc = " If key type is @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination)"] - #[doc = " or NULL when confirming LE Secure Connections Numeric Comparison."] - #[doc = " If key type is @ref BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in little-endian format."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Authentication key successfully set."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Authentication key has not been requested."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Reply with an authentication key."] +#[doc = ""] +#[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST or a @ref BLE_GAP_EVT_PASSKEY_DISPLAY, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] +#[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES."] +#[doc = " @param[in] p_key If key type is @ref BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL."] +#[doc = " If key type is @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination)"] +#[doc = " or NULL when confirming LE Secure Connections Numeric Comparison."] +#[doc = " If key type is @ref BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in little-endian format."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Authentication key successfully set."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Authentication key has not been requested."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_auth_key_reply(conn_handle: u16, key_type: u8, p_key: *const u8) -> u32 { let ret: u32; @@ -10063,45 +9916,43 @@ pub unsafe fn sd_ble_gap_auth_key_reply(conn_handle: u16, key_type: u8, p_key: * ret } - - #[doc = "@brief Reply with an LE Secure connections DHKey."] - #[doc = ""] - #[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] - #[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_dhkey LE Secure Connections DHKey."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS DHKey successfully set."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - The peer is not authenticated."] - #[doc = " - The application has not pulled a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Reply with an LE Secure connections DHKey."] +#[doc = ""] +#[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE."] +#[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_dhkey LE Secure Connections DHKey."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS DHKey successfully set."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - The peer is not authenticated."] +#[doc = " - The application has not pulled a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_lesc_dhkey_reply( - conn_handle: u16, - p_dhkey: *const ble_gap_lesc_dhkey_t, - ) -> u32 { + conn_handle: u16, + p_dhkey: *const ble_gap_lesc_dhkey_t, +) -> u32 { let ret: u32; asm!("svc 129", inout("r0") to_asm(conn_handle) => ret, @@ -10113,26 +9964,24 @@ pub unsafe fn sd_ble_gap_lesc_dhkey_reply( ret } - - #[doc = "@brief Notify the peer of a local keypress."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] kp_not See @ref BLE_GAP_KP_NOT_TYPES."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Keypress notification successfully queued for transmission."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - Authentication key not requested."] - #[doc = " - Passkey has not been entered."] - #[doc = " - Keypresses have not been enabled by both peers."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time."] - +#[doc = "@brief Notify the peer of a local keypress."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] kp_not See @ref BLE_GAP_KP_NOT_TYPES."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Keypress notification successfully queued for transmission."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - Authentication key not requested."] +#[doc = " - Passkey has not been entered."] +#[doc = " - Keypresses have not been enabled by both peers."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time."] #[inline(always)] pub unsafe fn sd_ble_gap_keypress_notify(conn_handle: u16, kp_not: u8) -> u32 { let ret: u32; @@ -10146,31 +9995,29 @@ pub unsafe fn sd_ble_gap_keypress_notify(conn_handle: u16, kp_not: u8) -> u32 { ret } - - #[doc = "@brief Generate a set of OOB data to send to a peer out of band."] - #[doc = ""] - #[doc = " @note The @ref ble_gap_addr_t included in the OOB data returned will be the currently active one (or, if a connection has already been established,"] - #[doc = " the one used during connection setup). The application may manually overwrite it with an updated value."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle. Can be @ref BLE_CONN_HANDLE_INVALID if a BLE connection has not been established yet."] - #[doc = " @param[in] p_pk_own LE Secure Connections local P-256 Public Key."] - #[doc = " @param[out] p_oobd_own The OOB data to be sent out of band to a peer."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS OOB data successfully generated."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Generate a set of OOB data to send to a peer out of band."] +#[doc = ""] +#[doc = " @note The @ref ble_gap_addr_t included in the OOB data returned will be the currently active one (or, if a connection has already been established,"] +#[doc = " the one used during connection setup). The application may manually overwrite it with an updated value."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle. Can be @ref BLE_CONN_HANDLE_INVALID if a BLE connection has not been established yet."] +#[doc = " @param[in] p_pk_own LE Secure Connections local P-256 Public Key."] +#[doc = " @param[out] p_oobd_own The OOB data to be sent out of band to a peer."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS OOB data successfully generated."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_lesc_oob_data_get( - conn_handle: u16, - p_pk_own: *const ble_gap_lesc_p256_pk_t, - p_oobd_own: *mut ble_gap_lesc_oob_data_t, - ) -> u32 { + conn_handle: u16, + p_pk_own: *const ble_gap_lesc_p256_pk_t, + p_oobd_own: *mut ble_gap_lesc_oob_data_t, +) -> u32 { let ret: u32; asm!("svc 131", inout("r0") to_asm(conn_handle) => ret, @@ -10182,43 +10029,41 @@ pub unsafe fn sd_ble_gap_lesc_oob_data_get( ret } - - #[doc = "@brief Provide the OOB data sent/received out of band."] - #[doc = ""] - #[doc = " @note An authentication procedure with OOB selected as an algorithm must be in progress when calling this function."] - #[doc = " @note A @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event with the oobd_req set to 1 must have been received prior to calling this function."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_oobd_own The OOB data sent out of band to a peer or NULL if the peer has not received OOB data."] - #[doc = " Must correspond to @ref ble_gap_sec_params_t::oob flag in @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST."] - #[doc = " @param[in] p_oobd_peer The OOB data received out of band from a peer or NULL if none received."] - #[doc = " Must correspond to @ref ble_gap_sec_params_t::oob flag"] - #[doc = " in @ref sd_ble_gap_authenticate in the central role or"] - #[doc = " in @ref sd_ble_gap_sec_params_reply in the peripheral role."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS OOB data accepted."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - Authentication key not requested"] - #[doc = " - Not expecting LESC OOB data"] - #[doc = " - Have not actually exchanged passkeys."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Provide the OOB data sent/received out of band."] +#[doc = ""] +#[doc = " @note An authentication procedure with OOB selected as an algorithm must be in progress when calling this function."] +#[doc = " @note A @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event with the oobd_req set to 1 must have been received prior to calling this function."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{This function is used during authentication procedures\\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_oobd_own The OOB data sent out of band to a peer or NULL if the peer has not received OOB data."] +#[doc = " Must correspond to @ref ble_gap_sec_params_t::oob flag in @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST."] +#[doc = " @param[in] p_oobd_peer The OOB data received out of band from a peer or NULL if none received."] +#[doc = " Must correspond to @ref ble_gap_sec_params_t::oob flag"] +#[doc = " in @ref sd_ble_gap_authenticate in the central role or"] +#[doc = " in @ref sd_ble_gap_sec_params_reply in the peripheral role."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS OOB data accepted."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - Authentication key not requested"] +#[doc = " - Not expecting LESC OOB data"] +#[doc = " - Have not actually exchanged passkeys."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_lesc_oob_data_set( - conn_handle: u16, - p_oobd_own: *const ble_gap_lesc_oob_data_t, - p_oobd_peer: *const ble_gap_lesc_oob_data_t, - ) -> u32 { + conn_handle: u16, + p_oobd_own: *const ble_gap_lesc_oob_data_t, + p_oobd_peer: *const ble_gap_lesc_oob_data_t, +) -> u32 { let ret: u32; asm!("svc 132", inout("r0") to_asm(conn_handle) => ret, @@ -10230,39 +10075,37 @@ pub unsafe fn sd_ble_gap_lesc_oob_data_set( ret } - - #[doc = "@brief Initiate GAP Encryption procedure."] - #[doc = ""] - #[doc = " @details In the central role, this function will initiate the encryption procedure using the encryption information provided."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE, The connection security has been updated.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_master_id Pointer to a @ref ble_gap_master_id_t master identification structure."] - #[doc = " @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully initiated authentication procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_ROLE Operation is not supported in the Peripheral role."] - #[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, wait for pending procedures to complete and retry."] - +#[doc = "@brief Initiate GAP Encryption procedure."] +#[doc = ""] +#[doc = " @details In the central role, this function will initiate the encryption procedure using the encryption information provided."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE, The connection security has been updated.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_ENC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_master_id Pointer to a @ref ble_gap_master_id_t master identification structure."] +#[doc = " @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully initiated authentication procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_ROLE Operation is not supported in the Peripheral role."] +#[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, wait for pending procedures to complete and retry."] #[inline(always)] pub unsafe fn sd_ble_gap_encrypt( - conn_handle: u16, - p_master_id: *const ble_gap_master_id_t, - p_enc_info: *const ble_gap_enc_info_t, - ) -> u32 { + conn_handle: u16, + p_master_id: *const ble_gap_master_id_t, + p_enc_info: *const ble_gap_enc_info_t, +) -> u32 { let ret: u32; asm!("svc 133", inout("r0") to_asm(conn_handle) => ret, @@ -10274,37 +10117,35 @@ pub unsafe fn sd_ble_gap_encrypt( ret } - - #[doc = "@brief Reply with GAP security information."] - #[doc = ""] - #[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in @ref NRF_ERROR_INVALID_STATE."] - #[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] - #[doc = " @note Data signing is not yet supported, and p_sign_info must therefore be NULL."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPH_ENC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available."] - #[doc = " @param[in] p_id_info Pointer to a @ref ble_gap_irk_t identity information structure. May be NULL to signal none is available."] - #[doc = " @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully accepted security information."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - No link has been established."] - #[doc = " - No @ref BLE_GAP_EVT_SEC_REQUEST pending."] - #[doc = " - Encryption information provided by the app without being requested. See @ref ble_gap_evt_sec_info_request_t::enc_info."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Reply with GAP security information."] +#[doc = ""] +#[doc = " @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in @ref NRF_ERROR_INVALID_STATE."] +#[doc = " @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters."] +#[doc = " @note Data signing is not yet supported, and p_sign_info must therefore be NULL."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPH_ENC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available."] +#[doc = " @param[in] p_id_info Pointer to a @ref ble_gap_irk_t identity information structure. May be NULL to signal none is available."] +#[doc = " @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully accepted security information."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - No link has been established."] +#[doc = " - No @ref BLE_GAP_EVT_SEC_REQUEST pending."] +#[doc = " - Encryption information provided by the app without being requested. See @ref ble_gap_evt_sec_info_request_t::enc_info."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_sec_info_reply( - conn_handle: u16, - p_enc_info: *const ble_gap_enc_info_t, - p_id_info: *const ble_gap_irk_t, - p_sign_info: *const ble_gap_sign_info_t, - ) -> u32 { + conn_handle: u16, + p_enc_info: *const ble_gap_enc_info_t, + p_id_info: *const ble_gap_irk_t, + p_sign_info: *const ble_gap_sign_info_t, +) -> u32 { let ret: u32; asm!("svc 134", inout("r0") to_asm(conn_handle) => ret, @@ -10316,18 +10157,19 @@ pub unsafe fn sd_ble_gap_sec_info_reply( ret } - - #[doc = "@brief Get the current connection security."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Current connection security successfully retrieved."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Get the current connection security."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Current connection security successfully retrieved."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] -pub unsafe fn sd_ble_gap_conn_sec_get(conn_handle: u16, p_conn_sec: *mut ble_gap_conn_sec_t) -> u32 { +pub unsafe fn sd_ble_gap_conn_sec_get( + conn_handle: u16, + p_conn_sec: *mut ble_gap_conn_sec_t, +) -> u32 { let ret: u32; asm!("svc 135", inout("r0") to_asm(conn_handle) => ret, @@ -10339,30 +10181,28 @@ pub unsafe fn sd_ble_gap_conn_sec_get(conn_handle: u16, p_conn_sec: *mut ble_gap ret } - - #[doc = "@brief Start reporting the received signal strength to the application."] - #[doc = ""] - #[doc = " A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_RSSI_CHANGED, New RSSI data available. How often the event is generated is"] - #[doc = " dependent on the settings of the <code>threshold_dbm</code>"] - #[doc = " and <code>skip_count</code> input parameters.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_RSSI_FILT_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] threshold_dbm Minimum change in dBm before triggering the @ref BLE_GAP_EVT_RSSI_CHANGED event. Events are disabled if threshold_dbm equals @ref BLE_GAP_RSSI_THRESHOLD_INVALID."] - #[doc = " @param[in] skip_count Number of RSSI samples with a change of threshold_dbm or more before sending a new @ref BLE_GAP_EVT_RSSI_CHANGED event."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully activated RSSI reporting."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is already ongoing."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Start reporting the received signal strength to the application."] +#[doc = ""] +#[doc = " A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_RSSI_CHANGED, New RSSI data available. How often the event is generated is"] +#[doc = " dependent on the settings of the <code>threshold_dbm</code>"] +#[doc = " and <code>skip_count</code> input parameters.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_RSSI_FILT_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] threshold_dbm Minimum change in dBm before triggering the @ref BLE_GAP_EVT_RSSI_CHANGED event. Events are disabled if threshold_dbm equals @ref BLE_GAP_RSSI_THRESHOLD_INVALID."] +#[doc = " @param[in] skip_count Number of RSSI samples with a change of threshold_dbm or more before sending a new @ref BLE_GAP_EVT_RSSI_CHANGED event."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully activated RSSI reporting."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is already ongoing."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_rssi_start(conn_handle: u16, threshold_dbm: u8, skip_count: u8) -> u32 { let ret: u32; @@ -10376,23 +10216,21 @@ pub unsafe fn sd_ble_gap_rssi_start(conn_handle: u16, threshold_dbm: u8, skip_co ret } - - #[doc = "@brief Stop reporting the received signal strength."] - #[doc = ""] - #[doc = " @note An RSSI change detected before the call but not yet received by the application"] - #[doc = " may be reported after @ref sd_ble_gap_rssi_stop has been called."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_RSSI_FILT_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully deactivated RSSI reporting."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - +#[doc = "@brief Stop reporting the received signal strength."] +#[doc = ""] +#[doc = " @note An RSSI change detected before the call but not yet received by the application"] +#[doc = " may be reported after @ref sd_ble_gap_rssi_stop has been called."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_RSSI_FILT_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully deactivated RSSI reporting."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_rssi_stop(conn_handle: u16) -> u32 { let ret: u32; @@ -10406,26 +10244,24 @@ pub unsafe fn sd_ble_gap_rssi_stop(conn_handle: u16) -> u32 { ret } - - #[doc = "@brief Get the received signal strength for the last connection event."] - #[doc = ""] - #[doc = " @ref sd_ble_gap_rssi_start must be called to start reporting RSSI before using this function. @ref NRF_ERROR_NOT_FOUND"] - #[doc = " will be returned until RSSI was sampled for the first time after calling @ref sd_ble_gap_rssi_start."] - #[doc = " @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement."] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[out] p_rssi Pointer to the location where the RSSI measurement shall be stored."] - #[doc = " @param[out] p_ch_index Pointer to the location where Channel Index for the RSSI measurement shall be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully read the RSSI."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND No sample is available."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing."] - +#[doc = "@brief Get the received signal strength for the last connection event."] +#[doc = ""] +#[doc = " @ref sd_ble_gap_rssi_start must be called to start reporting RSSI before using this function. @ref NRF_ERROR_NOT_FOUND"] +#[doc = " will be returned until RSSI was sampled for the first time after calling @ref sd_ble_gap_rssi_start."] +#[doc = " @note ERRATA-153 requires the rssi sample to be compensated based on a temperature measurement."] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[out] p_rssi Pointer to the location where the RSSI measurement shall be stored."] +#[doc = " @param[out] p_ch_index Pointer to the location where Channel Index for the RSSI measurement shall be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully read the RSSI."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND No sample is available."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing."] #[inline(always)] pub unsafe fn sd_ble_gap_rssi_get(conn_handle: u16, p_rssi: *mut i8, p_ch_index: *mut u8) -> u32 { let ret: u32; @@ -10439,62 +10275,60 @@ pub unsafe fn sd_ble_gap_rssi_get(conn_handle: u16, p_rssi: *mut i8, p_ch_index: ret } - - #[doc = "@brief Start or continue scanning (GAP Discovery procedure, Observer Procedure)."] - #[doc = ""] - #[doc = " @note A call to this function will require the application to keep the memory pointed by"] - #[doc = " p_adv_report_buffer alive until the buffer is released. The buffer is released when the scanner is stopped"] - #[doc = " or when this function is called with another buffer."] - #[doc = ""] - #[doc = " @note The scanner will automatically stop in the following cases:"] - #[doc = " - @ref sd_ble_gap_scan_stop is called."] - #[doc = " - @ref sd_ble_gap_connect is called."] - #[doc = " - A @ref BLE_GAP_EVT_TIMEOUT with source set to @ref BLE_GAP_TIMEOUT_SRC_SCAN is received."] - #[doc = " - When a @ref BLE_GAP_EVT_ADV_REPORT event is received and @ref ble_gap_adv_report_type_t::status is not set to"] - #[doc = " @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. In this case scanning is only paused to let the application"] - #[doc = " access received data. The application must call this function to continue scanning, or call @ref sd_ble_gap_scan_stop"] - #[doc = " to stop scanning."] - #[doc = ""] - #[doc = " @note If a @ref BLE_GAP_EVT_ADV_REPORT event is received with @ref ble_gap_adv_report_type_t::status set to"] - #[doc = " @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the scanner will continue scanning, and the application will"] - #[doc = " receive more reports from this advertising event. The following reports will include the old and new received data."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_ADV_REPORT, An advertising or scan response packet has been received.}"] - #[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT, Scanner has timed out.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_SCAN_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] p_scan_params Pointer to scan parameters structure. When this function is used to continue"] - #[doc = " scanning, this parameter must be NULL."] - #[doc = " @param[in] p_adv_report_buffer Pointer to buffer used to store incoming advertising data."] - #[doc = " The memory pointed to should be kept alive until the scanning is stopped."] - #[doc = " See @ref BLE_GAP_SCAN_BUFFER_SIZE for minimum and maximum buffer size."] - #[doc = " If the scanner receives advertising data larger than can be stored in the buffer,"] - #[doc = " a @ref BLE_GAP_EVT_ADV_REPORT will be raised with @ref ble_gap_adv_report_type_t::status"] - #[doc = " set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully initiated scanning procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] - #[doc = " - Scanning is already ongoing and p_scan_params was not NULL"] - #[doc = " - Scanning is not running and p_scan_params was NULL."] - #[doc = " - The scanner has timed out when this function is called to continue scanning."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. See @ref ble_gap_scan_params_t."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported parameters supplied. See @ref ble_gap_scan_params_t."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH The provided buffer length is invalid. See @ref BLE_GAP_SCAN_BUFFER_MIN."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available."] - #[doc = " Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again"] - +#[doc = "@brief Start or continue scanning (GAP Discovery procedure, Observer Procedure)."] +#[doc = ""] +#[doc = " @note A call to this function will require the application to keep the memory pointed by"] +#[doc = " p_adv_report_buffer alive until the buffer is released. The buffer is released when the scanner is stopped"] +#[doc = " or when this function is called with another buffer."] +#[doc = ""] +#[doc = " @note The scanner will automatically stop in the following cases:"] +#[doc = " - @ref sd_ble_gap_scan_stop is called."] +#[doc = " - @ref sd_ble_gap_connect is called."] +#[doc = " - A @ref BLE_GAP_EVT_TIMEOUT with source set to @ref BLE_GAP_TIMEOUT_SRC_SCAN is received."] +#[doc = " - When a @ref BLE_GAP_EVT_ADV_REPORT event is received and @ref ble_gap_adv_report_type_t::status is not set to"] +#[doc = " @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. In this case scanning is only paused to let the application"] +#[doc = " access received data. The application must call this function to continue scanning, or call @ref sd_ble_gap_scan_stop"] +#[doc = " to stop scanning."] +#[doc = ""] +#[doc = " @note If a @ref BLE_GAP_EVT_ADV_REPORT event is received with @ref ble_gap_adv_report_type_t::status set to"] +#[doc = " @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA, the scanner will continue scanning, and the application will"] +#[doc = " receive more reports from this advertising event. The following reports will include the old and new received data."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_ADV_REPORT, An advertising or scan response packet has been received.}"] +#[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT, Scanner has timed out.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_SCAN_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] p_scan_params Pointer to scan parameters structure. When this function is used to continue"] +#[doc = " scanning, this parameter must be NULL."] +#[doc = " @param[in] p_adv_report_buffer Pointer to buffer used to store incoming advertising data."] +#[doc = " The memory pointed to should be kept alive until the scanning is stopped."] +#[doc = " See @ref BLE_GAP_SCAN_BUFFER_SIZE for minimum and maximum buffer size."] +#[doc = " If the scanner receives advertising data larger than can be stored in the buffer,"] +#[doc = " a @ref BLE_GAP_EVT_ADV_REPORT will be raised with @ref ble_gap_adv_report_type_t::status"] +#[doc = " set to @ref BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_TRUNCATED."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully initiated scanning procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either:"] +#[doc = " - Scanning is already ongoing and p_scan_params was not NULL"] +#[doc = " - Scanning is not running and p_scan_params was NULL."] +#[doc = " - The scanner has timed out when this function is called to continue scanning."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. See @ref ble_gap_scan_params_t."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported parameters supplied. See @ref ble_gap_scan_params_t."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH The provided buffer length is invalid. See @ref BLE_GAP_SCAN_BUFFER_MIN."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available."] +#[doc = " Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again"] #[inline(always)] pub unsafe fn sd_ble_gap_scan_start( - p_scan_params: *const ble_gap_scan_params_t, - p_adv_report_buffer: *const ble_data_t, - ) -> u32 { + p_scan_params: *const ble_gap_scan_params_t, + p_adv_report_buffer: *const ble_data_t, +) -> u32 { let ret: u32; asm!("svc 138", inout("r0") to_asm(p_scan_params) => ret, @@ -10506,19 +10340,17 @@ pub unsafe fn sd_ble_gap_scan_start( ret } - - #[doc = "@brief Stop scanning (GAP Discovery procedure, Observer Procedure)."] - #[doc = ""] - #[doc = " @note The buffer provided in @ref sd_ble_gap_scan_start is released."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_SCAN_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully stopped scanning procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Not in the scanning state."] - +#[doc = "@brief Stop scanning (GAP Discovery procedure, Observer Procedure)."] +#[doc = ""] +#[doc = " @note The buffer provided in @ref sd_ble_gap_scan_start is released."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_SCAN_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully stopped scanning procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Not in the scanning state."] #[inline(always)] pub unsafe fn sd_ble_gap_scan_stop() -> u32 { let ret: u32; @@ -10532,57 +10364,55 @@ pub unsafe fn sd_ble_gap_scan_stop() -> u32 { ret } - - #[doc = "@brief Create a connection (GAP Link Establishment)."] - #[doc = ""] - #[doc = " @note If a scanning procedure is currently in progress it will be automatically stopped when calling this function."] - #[doc = " The scanning procedure will be stopped even if the function returns an error."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_CONNECTED, A connection was established.}"] - #[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT, Failed to establish a connection.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC}"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] p_peer_addr Pointer to peer identity address. If @ref ble_gap_scan_params_t::filter_policy is set to use"] - #[doc = " whitelist, then p_peer_addr is ignored."] - #[doc = " @param[in] p_scan_params Pointer to scan parameters structure."] - #[doc = " @param[in] p_conn_params Pointer to desired connection parameters."] - #[doc = " @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or"] - #[doc = " @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully initiated connection procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid parameter(s) pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " - Invalid parameter(s) in p_scan_params or p_conn_params."] - #[doc = " - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set."] - #[doc = " - Peer address was not present in the device identity list, see @ref sd_ble_gap_device_identities_set."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The SoftDevice is in an invalid state to perform this operation. This may be due to an"] - #[doc = " existing locally initiated connect procedure, which must complete before initiating again."] - #[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Peer address."] - #[doc = " @retval ::NRF_ERROR_CONN_COUNT The limit of available connections for this connection configuration tag has been reached."] - #[doc = " To increase the number of available connections,"] - #[doc = " use @ref sd_ble_cfg_set with @ref BLE_GAP_CFG_ROLE_COUNT or @ref BLE_CONN_CFG_GAP."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Either:"] - #[doc = " - Not enough BLE role slots available."] - #[doc = " Stop one or more currently active roles (Central, Peripheral or Observer) and try again."] - #[doc = " - The event_length parameter associated with conn_cfg_tag is too small to be able to"] - #[doc = " establish a connection on the selected @ref ble_gap_scan_params_t::scan_phys."] - #[doc = " Use @ref sd_ble_cfg_set to increase the event length."] - +#[doc = "@brief Create a connection (GAP Link Establishment)."] +#[doc = ""] +#[doc = " @note If a scanning procedure is currently in progress it will be automatically stopped when calling this function."] +#[doc = " The scanning procedure will be stopped even if the function returns an error."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_CONNECTED, A connection was established.}"] +#[doc = " @event{@ref BLE_GAP_EVT_TIMEOUT, Failed to establish a connection.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_WL_SHARE_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_PRIV_MSC}"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] p_peer_addr Pointer to peer identity address. If @ref ble_gap_scan_params_t::filter_policy is set to use"] +#[doc = " whitelist, then p_peer_addr is ignored."] +#[doc = " @param[in] p_scan_params Pointer to scan parameters structure."] +#[doc = " @param[in] p_conn_params Pointer to desired connection parameters."] +#[doc = " @param[in] conn_cfg_tag Tag identifying a configuration set by @ref sd_ble_cfg_set or"] +#[doc = " @ref BLE_CONN_CFG_TAG_DEFAULT to use the default connection configuration."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully initiated connection procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid parameter(s) pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " - Invalid parameter(s) in p_scan_params or p_conn_params."] +#[doc = " - Use of whitelist requested but whitelist has not been set, see @ref sd_ble_gap_whitelist_set."] +#[doc = " - Peer address was not present in the device identity list, see @ref sd_ble_gap_device_identities_set."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND conn_cfg_tag not found."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The SoftDevice is in an invalid state to perform this operation. This may be due to an"] +#[doc = " existing locally initiated connect procedure, which must complete before initiating again."] +#[doc = " @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Peer address."] +#[doc = " @retval ::NRF_ERROR_CONN_COUNT The limit of available connections for this connection configuration tag has been reached."] +#[doc = " To increase the number of available connections,"] +#[doc = " use @ref sd_ble_cfg_set with @ref BLE_GAP_CFG_ROLE_COUNT or @ref BLE_CONN_CFG_GAP."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Either:"] +#[doc = " - Not enough BLE role slots available."] +#[doc = " Stop one or more currently active roles (Central, Peripheral or Observer) and try again."] +#[doc = " - The event_length parameter associated with conn_cfg_tag is too small to be able to"] +#[doc = " establish a connection on the selected @ref ble_gap_scan_params_t::scan_phys."] +#[doc = " Use @ref sd_ble_cfg_set to increase the event length."] #[inline(always)] pub unsafe fn sd_ble_gap_connect( - p_peer_addr: *const ble_gap_addr_t, - p_scan_params: *const ble_gap_scan_params_t, - p_conn_params: *const ble_gap_conn_params_t, - conn_cfg_tag: u8, - ) -> u32 { + p_peer_addr: *const ble_gap_addr_t, + p_scan_params: *const ble_gap_scan_params_t, + p_conn_params: *const ble_gap_conn_params_t, + conn_cfg_tag: u8, +) -> u32 { let ret: u32; asm!("svc 140", inout("r0") to_asm(p_peer_addr) => ret, @@ -10594,17 +10424,15 @@ pub unsafe fn sd_ble_gap_connect( ret } - - #[doc = "@brief Cancel a connection establishment."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully canceled an ongoing connection procedure."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE No locally initiated connect procedure started or connection"] - #[doc = " completed occurred."] - +#[doc = "@brief Cancel a connection establishment."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully canceled an ongoing connection procedure."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE No locally initiated connect procedure started or connection"] +#[doc = " completed occurred."] #[inline(always)] pub unsafe fn sd_ble_gap_connect_cancel() -> u32 { let ret: u32; @@ -10618,60 +10446,58 @@ pub unsafe fn sd_ble_gap_connect_cancel() -> u32 { ret } - - #[doc = "@brief Initiate or respond to a PHY Update Procedure"] - #[doc = ""] - #[doc = " @details This function is used to initiate or respond to a PHY Update Procedure. It will always"] - #[doc = " generate a @ref BLE_GAP_EVT_PHY_UPDATE event if successfully executed."] - #[doc = " If this function is used to initiate a PHY Update procedure and the only option"] - #[doc = " provided in @ref ble_gap_phys_t::tx_phys and @ref ble_gap_phys_t::rx_phys is the"] - #[doc = " currently active PHYs in the respective directions, the SoftDevice will generate a"] - #[doc = " @ref BLE_GAP_EVT_PHY_UPDATE with the current PHYs set and will not initiate the"] - #[doc = " procedure in the Link Layer."] - #[doc = ""] - #[doc = " If @ref ble_gap_phys_t::tx_phys or @ref ble_gap_phys_t::rx_phys is @ref BLE_GAP_PHY_AUTO,"] - #[doc = " then the stack will select PHYs based on the peer's PHY preferences and the local link"] - #[doc = " configuration. The PHY Update procedure will for this case result in a PHY combination"] - #[doc = " that respects the time constraints configured with @ref sd_ble_cfg_set and the current"] - #[doc = " link layer data length."] - #[doc = ""] - #[doc = " When acting as a central, the SoftDevice will select the fastest common PHY in each direction."] - #[doc = ""] - #[doc = " If the peer does not support the PHY Update Procedure, then the resulting"] - #[doc = " @ref BLE_GAP_EVT_PHY_UPDATE event will have a status set to"] - #[doc = " @ref BLE_HCI_UNSUPPORTED_REMOTE_FEATURE."] - #[doc = ""] - #[doc = " If the PHY Update procedure was rejected by the peer due to a procedure collision, the status"] - #[doc = " will be @ref BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION or"] - #[doc = " @ref BLE_HCI_DIFFERENT_TRANSACTION_COLLISION."] - #[doc = " If the peer responds to the PHY Update procedure with invalid parameters, the status"] - #[doc = " will be @ref BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS."] - #[doc = " If the PHY Update procedure was rejected by the peer for a different reason, the status will"] - #[doc = " contain the reason as specified by the peer."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GAP_EVT_PHY_UPDATE, Result of the PHY Update Procedure.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PHY_UPDATE}"] - #[doc = " @mmsc{@ref BLE_GAP_PERIPHERAL_PHY_UPDATE}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle to indicate the connection for which the PHY Update is requested."] - #[doc = " @param[in] p_gap_phys Pointer to PHY structure."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully requested a PHY Update."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] - #[doc = " @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the combination of"] - #[doc = " @ref ble_gap_phys_t::tx_phys, @ref ble_gap_phys_t::rx_phys, and @ref ble_gap_data_length_params_t."] - #[doc = " The connection event length is configured with @ref BLE_CONN_CFG_GAP using @ref sd_ble_cfg_set."] - #[doc = " @retval ::NRF_ERROR_BUSY Procedure is already in progress or not allowed at this time. Process pending events and wait for the pending procedure to complete and retry."] - #[doc = ""] - +#[doc = "@brief Initiate or respond to a PHY Update Procedure"] +#[doc = ""] +#[doc = " @details This function is used to initiate or respond to a PHY Update Procedure. It will always"] +#[doc = " generate a @ref BLE_GAP_EVT_PHY_UPDATE event if successfully executed."] +#[doc = " If this function is used to initiate a PHY Update procedure and the only option"] +#[doc = " provided in @ref ble_gap_phys_t::tx_phys and @ref ble_gap_phys_t::rx_phys is the"] +#[doc = " currently active PHYs in the respective directions, the SoftDevice will generate a"] +#[doc = " @ref BLE_GAP_EVT_PHY_UPDATE with the current PHYs set and will not initiate the"] +#[doc = " procedure in the Link Layer."] +#[doc = ""] +#[doc = " If @ref ble_gap_phys_t::tx_phys or @ref ble_gap_phys_t::rx_phys is @ref BLE_GAP_PHY_AUTO,"] +#[doc = " then the stack will select PHYs based on the peer's PHY preferences and the local link"] +#[doc = " configuration. The PHY Update procedure will for this case result in a PHY combination"] +#[doc = " that respects the time constraints configured with @ref sd_ble_cfg_set and the current"] +#[doc = " link layer data length."] +#[doc = ""] +#[doc = " When acting as a central, the SoftDevice will select the fastest common PHY in each direction."] +#[doc = ""] +#[doc = " If the peer does not support the PHY Update Procedure, then the resulting"] +#[doc = " @ref BLE_GAP_EVT_PHY_UPDATE event will have a status set to"] +#[doc = " @ref BLE_HCI_UNSUPPORTED_REMOTE_FEATURE."] +#[doc = ""] +#[doc = " If the PHY Update procedure was rejected by the peer due to a procedure collision, the status"] +#[doc = " will be @ref BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION or"] +#[doc = " @ref BLE_HCI_DIFFERENT_TRANSACTION_COLLISION."] +#[doc = " If the peer responds to the PHY Update procedure with invalid parameters, the status"] +#[doc = " will be @ref BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS."] +#[doc = " If the PHY Update procedure was rejected by the peer for a different reason, the status will"] +#[doc = " contain the reason as specified by the peer."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GAP_EVT_PHY_UPDATE, Result of the PHY Update Procedure.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_CENTRAL_PHY_UPDATE}"] +#[doc = " @mmsc{@ref BLE_GAP_PERIPHERAL_PHY_UPDATE}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle to indicate the connection for which the PHY Update is requested."] +#[doc = " @param[in] p_gap_phys Pointer to PHY structure."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully requested a PHY Update."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] +#[doc = " @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the combination of"] +#[doc = " @ref ble_gap_phys_t::tx_phys, @ref ble_gap_phys_t::rx_phys, and @ref ble_gap_data_length_params_t."] +#[doc = " The connection event length is configured with @ref BLE_CONN_CFG_GAP using @ref sd_ble_cfg_set."] +#[doc = " @retval ::NRF_ERROR_BUSY Procedure is already in progress or not allowed at this time. Process pending events and wait for the pending procedure to complete and retry."] +#[doc = ""] #[inline(always)] pub unsafe fn sd_ble_gap_phy_update(conn_handle: u16, p_gap_phys: *const ble_gap_phys_t) -> u32 { let ret: u32; @@ -10685,48 +10511,46 @@ pub unsafe fn sd_ble_gap_phy_update(conn_handle: u16, p_gap_phys: *const ble_gap ret } - - #[doc = "@brief Initiate or respond to a Data Length Update Procedure."] - #[doc = ""] - #[doc = " @note If the application uses @ref BLE_GAP_DATA_LENGTH_AUTO for one or more members of"] - #[doc = " p_dl_params, the SoftDevice will choose the highest value supported in current"] - #[doc = " configuration and connection parameters."] - #[doc = " @note If the link PHY is Coded, the SoftDevice will ensure that the MaxTxTime and/or MaxRxTime"] - #[doc = " used in the Data Length Update procedure is at least 2704 us. Otherwise, MaxTxTime and"] - #[doc = " MaxRxTime will be limited to maximum 2120 us."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_dl_params Pointer to local parameters to be used in Data Length Update"] - #[doc = " Procedure. Set any member to @ref BLE_GAP_DATA_LENGTH_AUTO to let"] - #[doc = " the SoftDevice automatically decide the value for that member."] - #[doc = " Set to NULL to use automatic values for all members."] - #[doc = " @param[out] p_dl_limitation Pointer to limitation to be written when local device does not"] - #[doc = " have enough resources or does not support the requested Data Length"] - #[doc = " Update parameters. Ignored if NULL."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GAP_DATA_LENGTH_UPDATE_PROCEDURE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully set Data Length Extension initiation/response parameters."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The requested parameters are not supported by the SoftDevice. Inspect"] - #[doc = " p_dl_limitation to see which parameter is not supported."] - #[doc = " @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the requested parameters."] - #[doc = " Use @ref sd_ble_cfg_set with @ref BLE_CONN_CFG_GAP to increase the connection event length."] - #[doc = " Inspect p_dl_limitation to see where the limitation is."] - #[doc = " @retval ::NRF_ERROR_BUSY Peer has already initiated a Data Length Update Procedure. Process the"] - #[doc = " pending @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST event to respond."] - +#[doc = "@brief Initiate or respond to a Data Length Update Procedure."] +#[doc = ""] +#[doc = " @note If the application uses @ref BLE_GAP_DATA_LENGTH_AUTO for one or more members of"] +#[doc = " p_dl_params, the SoftDevice will choose the highest value supported in current"] +#[doc = " configuration and connection parameters."] +#[doc = " @note If the link PHY is Coded, the SoftDevice will ensure that the MaxTxTime and/or MaxRxTime"] +#[doc = " used in the Data Length Update procedure is at least 2704 us. Otherwise, MaxTxTime and"] +#[doc = " MaxRxTime will be limited to maximum 2120 us."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_dl_params Pointer to local parameters to be used in Data Length Update"] +#[doc = " Procedure. Set any member to @ref BLE_GAP_DATA_LENGTH_AUTO to let"] +#[doc = " the SoftDevice automatically decide the value for that member."] +#[doc = " Set to NULL to use automatic values for all members."] +#[doc = " @param[out] p_dl_limitation Pointer to limitation to be written when local device does not"] +#[doc = " have enough resources or does not support the requested Data Length"] +#[doc = " Update parameters. Ignored if NULL."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GAP_DATA_LENGTH_UPDATE_PROCEDURE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully set Data Length Extension initiation/response parameters."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE No link has been established."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED The requested parameters are not supported by the SoftDevice. Inspect"] +#[doc = " p_dl_limitation to see which parameter is not supported."] +#[doc = " @retval ::NRF_ERROR_RESOURCES The connection event length configured for this link is not sufficient for the requested parameters."] +#[doc = " Use @ref sd_ble_cfg_set with @ref BLE_CONN_CFG_GAP to increase the connection event length."] +#[doc = " Inspect p_dl_limitation to see where the limitation is."] +#[doc = " @retval ::NRF_ERROR_BUSY Peer has already initiated a Data Length Update Procedure. Process the"] +#[doc = " pending @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST event to respond."] #[inline(always)] pub unsafe fn sd_ble_gap_data_length_update( - conn_handle: u16, - p_dl_params: *const ble_gap_data_length_params_t, - p_dl_limitation: *mut ble_gap_data_length_limitation_t, - ) -> u32 { + conn_handle: u16, + p_dl_params: *const ble_gap_data_length_params_t, + p_dl_limitation: *mut ble_gap_data_length_limitation_t, +) -> u32 { let ret: u32; asm!("svc 144", inout("r0") to_asm(conn_handle) => ret, @@ -10738,37 +10562,35 @@ pub unsafe fn sd_ble_gap_data_length_update( ret } - - #[doc = "@brief Start the Quality of Service (QoS) channel survey module."] - #[doc = ""] - #[doc = " @details The channel survey module provides measurements of the energy levels on"] - #[doc = " the Bluetooth Low Energy channels. When the module is enabled, @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT"] - #[doc = " events will periodically report the measured energy levels for each channel."] - #[doc = ""] - #[doc = " @note The measurements are scheduled with lower priority than other Bluetooth Low Energy roles,"] - #[doc = " Radio Timeslot API events and Flash API events."] - #[doc = ""] - #[doc = " @note The channel survey module will attempt to do measurements so that the average interval"] - #[doc = " between measurements will be interval_us. However due to the channel survey module"] - #[doc = " having the lowest priority of all roles and modules, this may not be possible. In that"] - #[doc = " case fewer than expected channel survey reports may be given."] - #[doc = ""] - #[doc = " @note In order to use the channel survey module, @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available"] - #[doc = " must be set. This is done using @ref sd_ble_cfg_set."] - #[doc = ""] - #[doc = " @param[in] interval_us Requested average interval for the measurements and reports. See"] - #[doc = " @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS for valid ranges. If set"] - #[doc = " to @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS, the channel"] - #[doc = " survey role will be scheduled at every available opportunity."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The module is successfully started."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. interval_us is out of the"] - #[doc = " allowed range."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to start the module when already running."] - #[doc = " @retval ::NRF_ERROR_RESOURCES The channel survey module is not available to the application."] - #[doc = " Set @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available using"] - #[doc = " @ref sd_ble_cfg_set."] - +#[doc = "@brief Start the Quality of Service (QoS) channel survey module."] +#[doc = ""] +#[doc = " @details The channel survey module provides measurements of the energy levels on"] +#[doc = " the Bluetooth Low Energy channels. When the module is enabled, @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT"] +#[doc = " events will periodically report the measured energy levels for each channel."] +#[doc = ""] +#[doc = " @note The measurements are scheduled with lower priority than other Bluetooth Low Energy roles,"] +#[doc = " Radio Timeslot API events and Flash API events."] +#[doc = ""] +#[doc = " @note The channel survey module will attempt to do measurements so that the average interval"] +#[doc = " between measurements will be interval_us. However due to the channel survey module"] +#[doc = " having the lowest priority of all roles and modules, this may not be possible. In that"] +#[doc = " case fewer than expected channel survey reports may be given."] +#[doc = ""] +#[doc = " @note In order to use the channel survey module, @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available"] +#[doc = " must be set. This is done using @ref sd_ble_cfg_set."] +#[doc = ""] +#[doc = " @param[in] interval_us Requested average interval for the measurements and reports. See"] +#[doc = " @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVALS for valid ranges. If set"] +#[doc = " to @ref BLE_GAP_QOS_CHANNEL_SURVEY_INTERVAL_CONTINUOUS, the channel"] +#[doc = " survey role will be scheduled at every available opportunity."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The module is successfully started."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. interval_us is out of the"] +#[doc = " allowed range."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to start the module when already running."] +#[doc = " @retval ::NRF_ERROR_RESOURCES The channel survey module is not available to the application."] +#[doc = " Set @ref ble_gap_cfg_role_count_t::qos_channel_survey_role_available using"] +#[doc = " @ref sd_ble_cfg_set."] #[inline(always)] pub unsafe fn sd_ble_gap_qos_channel_survey_start(interval_us: u32) -> u32 { let ret: u32; @@ -10782,15 +10604,13 @@ pub unsafe fn sd_ble_gap_qos_channel_survey_start(interval_us: u32) -> u32 { ret } - - #[doc = "@brief Stop the Quality of Service (QoS) channel survey module."] - #[doc = ""] - #[doc = " @note The SoftDevice may generate one @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT event after this"] - #[doc = " function is called."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The module is successfully stopped."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to stop the module when it is not running."] - +#[doc = "@brief Stop the Quality of Service (QoS) channel survey module."] +#[doc = ""] +#[doc = " @note The SoftDevice may generate one @ref BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT event after this"] +#[doc = " function is called."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The module is successfully stopped."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to stop the module when it is not running."] #[inline(always)] pub unsafe fn sd_ble_gap_qos_channel_survey_stop() -> u32 { let ret: u32; @@ -10804,28 +10624,26 @@ pub unsafe fn sd_ble_gap_qos_channel_survey_stop() -> u32 { ret } - - #[doc = "@brief Obtain the next connection event counter value."] - #[doc = ""] - #[doc = " @details The connection event counter is initialized to zero on the first connection event. The value is incremented"] - #[doc = " by one for each connection event. For more information see Bluetooth Core Specification v5.0, Vol 6, Part B,"] - #[doc = " Section 4.5.1."] - #[doc = ""] - #[doc = " @note The connection event counter obtained through this API will be outdated if this API is called"] - #[doc = " at the same time as the connection event counter is incremented."] - #[doc = ""] - #[doc = " @note This API will always return the last connection event counter + 1."] - #[doc = " The actual connection event may be multiple connection events later if:"] - #[doc = " - Slave latency is enabled and there is no data to transmit or receive."] - #[doc = " - Another role is scheduled with a higher priority at the same time as the next connection event."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[out] p_counter Pointer to the variable where the next connection event counter will be written."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The connection event counter was successfully retrieved."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - +#[doc = "@brief Obtain the next connection event counter value."] +#[doc = ""] +#[doc = " @details The connection event counter is initialized to zero on the first connection event. The value is incremented"] +#[doc = " by one for each connection event. For more information see Bluetooth Core Specification v5.0, Vol 6, Part B,"] +#[doc = " Section 4.5.1."] +#[doc = ""] +#[doc = " @note The connection event counter obtained through this API will be outdated if this API is called"] +#[doc = " at the same time as the connection event counter is incremented."] +#[doc = ""] +#[doc = " @note This API will always return the last connection event counter + 1."] +#[doc = " The actual connection event may be multiple connection events later if:"] +#[doc = " - Slave latency is enabled and there is no data to transmit or receive."] +#[doc = " - Another role is scheduled with a higher priority at the same time as the next connection event."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[out] p_counter Pointer to the variable where the next connection event counter will be written."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The connection event counter was successfully retrieved."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] #[inline(always)] pub unsafe fn sd_ble_gap_next_conn_evt_counter_get(conn_handle: u16, p_counter: *mut u16) -> u32 { let ret: u32; @@ -10839,31 +10657,29 @@ pub unsafe fn sd_ble_gap_next_conn_evt_counter_get(conn_handle: u16, p_counter: ret } - - #[doc = "@brief Start triggering a given task on connection event start."] - #[doc = ""] - #[doc = " @details When enabled, this feature will trigger a PPI task at the start of connection events."] - #[doc = " The application can configure the SoftDevice to trigger every N connection events starting from"] - #[doc = " a given connection event counter. See also @ref ble_gap_conn_event_trigger_t."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_params Connection event trigger parameters."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Success."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. See @ref ble_gap_conn_event_trigger_t."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Either:"] - #[doc = " - Trying to start connection event triggering when it is already ongoing."] - #[doc = " - @ref ble_gap_conn_event_trigger_t::conn_evt_counter_start is in the past."] - #[doc = " Use @ref sd_ble_gap_next_conn_evt_counter_get to find a new value"] - #[doc = "to be used as ble_gap_conn_event_trigger_t::conn_evt_counter_start."] - +#[doc = "@brief Start triggering a given task on connection event start."] +#[doc = ""] +#[doc = " @details When enabled, this feature will trigger a PPI task at the start of connection events."] +#[doc = " The application can configure the SoftDevice to trigger every N connection events starting from"] +#[doc = " a given connection event counter. See also @ref ble_gap_conn_event_trigger_t."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_params Connection event trigger parameters."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Success."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter supplied. See @ref ble_gap_conn_event_trigger_t."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Either:"] +#[doc = " - Trying to start connection event triggering when it is already ongoing."] +#[doc = " - @ref ble_gap_conn_event_trigger_t::conn_evt_counter_start is in the past."] +#[doc = " Use @ref sd_ble_gap_next_conn_evt_counter_get to find a new value"] +#[doc = "to be used as ble_gap_conn_event_trigger_t::conn_evt_counter_start."] #[inline(always)] pub unsafe fn sd_ble_gap_conn_evt_trigger_start( - conn_handle: u16, - p_params: *const ble_gap_conn_event_trigger_t, - ) -> u32 { + conn_handle: u16, + p_params: *const ble_gap_conn_event_trigger_t, +) -> u32 { let ret: u32; asm!("svc 149", inout("r0") to_asm(conn_handle) => ret, @@ -10875,15 +10691,13 @@ pub unsafe fn sd_ble_gap_conn_evt_trigger_start( ret } - - #[doc = "@brief Stop triggering the task configured using @ref sd_ble_gap_conn_evt_trigger_start."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Success."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to stop connection event triggering when it is not enabled."] - +#[doc = "@brief Stop triggering the task configured using @ref sd_ble_gap_conn_evt_trigger_start."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Success."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Trying to stop connection event triggering when it is not enabled."] #[inline(always)] pub unsafe fn sd_ble_gap_conn_evt_trigger_stop(conn_handle: u16) -> u32 { let ret: u32; @@ -11702,52 +11516,51 @@ fn bindgen_test_layout_ble_l2cap_evt_t() { ); } - #[doc = "@brief Set up an L2CAP channel."] - #[doc = ""] - #[doc = " @details This function is used to:"] - #[doc = " - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer."] - #[doc = " - Reply to a setup request of an L2CAP channel (if called in response to a"] - #[doc = " @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection"] - #[doc = " Response packet to a peer."] - #[doc = ""] - #[doc = " @note A call to this function will require the application to keep the SDU data buffer alive"] - #[doc = " until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or"] - #[doc = " @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.}"] - #[doc = " @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection Handle."] - #[doc = " @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel:"] - #[doc = " - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP"] - #[doc = " channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST"] - #[doc = " event when replying to a setup request of an L2CAP channel."] - #[doc = " - As output: local_cid for this channel."] - #[doc = " @param[in] p_params L2CAP channel parameters."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued request or response for transmission."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up)."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] - #[doc = " @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels,"] - #[doc = " see @ref ble_l2cap_conn_cfg_t::ch_count."] - +#[doc = "@brief Set up an L2CAP channel."] +#[doc = ""] +#[doc = " @details This function is used to:"] +#[doc = " - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer."] +#[doc = " - Reply to a setup request of an L2CAP channel (if called in response to a"] +#[doc = " @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection"] +#[doc = " Response packet to a peer."] +#[doc = ""] +#[doc = " @note A call to this function will require the application to keep the SDU data buffer alive"] +#[doc = " until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or"] +#[doc = " @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.}"] +#[doc = " @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection Handle."] +#[doc = " @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel:"] +#[doc = " - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP"] +#[doc = " channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST"] +#[doc = " event when replying to a setup request of an L2CAP channel."] +#[doc = " - As output: local_cid for this channel."] +#[doc = " @param[in] p_params L2CAP channel parameters."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued request or response for transmission."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up)."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] +#[doc = " @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels,"] +#[doc = " see @ref ble_l2cap_conn_cfg_t::ch_count."] #[inline(always)] pub unsafe fn sd_ble_l2cap_ch_setup( - conn_handle: u16, - p_local_cid: *mut u16, - p_params: *const ble_l2cap_ch_setup_params_t, - ) -> u32 { + conn_handle: u16, + p_local_cid: *mut u16, + p_params: *const ble_l2cap_ch_setup_params_t, +) -> u32 { let ret: u32; asm!("svc 184", inout("r0") to_asm(conn_handle) => ret, @@ -11759,28 +11572,26 @@ pub unsafe fn sd_ble_l2cap_ch_setup( ret } - - #[doc = "@brief Release an L2CAP channel."] - #[doc = ""] - #[doc = " @details This sends a Disconnection Request packet to a peer."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection Handle."] - #[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued request for transmission."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] - #[doc = " in progress for the L2CAP channel)."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] - +#[doc = "@brief Release an L2CAP channel."] +#[doc = ""] +#[doc = " @details This sends a Disconnection Request packet to a peer."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection Handle."] +#[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued request for transmission."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] +#[doc = " in progress for the L2CAP channel)."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] #[inline(always)] pub unsafe fn sd_ble_l2cap_ch_release(conn_handle: u16, local_cid: u16) -> u32 { let ret: u32; @@ -11794,45 +11605,43 @@ pub unsafe fn sd_ble_l2cap_ch_release(conn_handle: u16, local_cid: u16) -> u32 { ret } - - #[doc = "@brief Receive an SDU on an L2CAP channel."] - #[doc = ""] - #[doc = " @details This may issue additional credits to the peer using an LE Flow Control Credit packet."] - #[doc = ""] - #[doc = " @note A call to this function will require the application to keep the memory pointed by"] - #[doc = " @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX"] - #[doc = " or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] - #[doc = ""] - #[doc = " @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers"] - #[doc = " for reception per L2CAP channel."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_L2CAP_CH_RX_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection Handle."] - #[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] - #[doc = " @param[in] p_sdu_buf Pointer to the SDU data buffer."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Buffer accepted."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] - #[doc = " in progress for an L2CAP channel)."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a"] - #[doc = " @ref BLE_L2CAP_EVT_CH_RX event and retry."] - +#[doc = "@brief Receive an SDU on an L2CAP channel."] +#[doc = ""] +#[doc = " @details This may issue additional credits to the peer using an LE Flow Control Credit packet."] +#[doc = ""] +#[doc = " @note A call to this function will require the application to keep the memory pointed by"] +#[doc = " @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX"] +#[doc = " or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] +#[doc = ""] +#[doc = " @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers"] +#[doc = " for reception per L2CAP channel."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_L2CAP_CH_RX_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection Handle."] +#[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] +#[doc = " @param[in] p_sdu_buf Pointer to the SDU data buffer."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Buffer accepted."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] +#[doc = " in progress for an L2CAP channel)."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a"] +#[doc = " @ref BLE_L2CAP_EVT_CH_RX event and retry."] #[inline(always)] pub unsafe fn sd_ble_l2cap_ch_rx( - conn_handle: u16, - local_cid: u16, - p_sdu_buf: *const ble_data_t, - ) -> u32 { + conn_handle: u16, + local_cid: u16, + p_sdu_buf: *const ble_data_t, +) -> u32 { let ret: u32; asm!("svc 186", inout("r0") to_asm(conn_handle) => ret, @@ -11844,56 +11653,54 @@ pub unsafe fn sd_ble_l2cap_ch_rx( ret } - - #[doc = "@brief Transmit an SDU on an L2CAP channel."] - #[doc = ""] - #[doc = " @note A call to this function will require the application to keep the memory pointed by"] - #[doc = " @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX"] - #[doc = " or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] - #[doc = ""] - #[doc = " @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for"] - #[doc = " transmission per L2CAP channel."] - #[doc = ""] - #[doc = " @note The application can keep track of the available credits for transmission by following"] - #[doc = " the procedure below:"] - #[doc = " - Store initial credits given by the peer in a variable."] - #[doc = " (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)"] - #[doc = " - Decrement the variable, which stores the currently available credits, by"] - #[doc = " ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns"] - #[doc = " @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)"] - #[doc = " - Increment the variable, which stores the currently available credits, by additional"] - #[doc = " credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_L2CAP_CH_TX_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection Handle."] - #[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] - #[doc = " @param[in] p_sdu_buf Pointer to the SDU data buffer."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] - #[doc = " in progress for the L2CAP channel)."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than"] - #[doc = " @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in"] - #[doc = " @ref BLE_L2CAP_EVT_CH_SETUP event."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a"] - #[doc = " @ref BLE_L2CAP_EVT_CH_TX event and retry."] - +#[doc = "@brief Transmit an SDU on an L2CAP channel."] +#[doc = ""] +#[doc = " @note A call to this function will require the application to keep the memory pointed by"] +#[doc = " @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX"] +#[doc = " or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event."] +#[doc = ""] +#[doc = " @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for"] +#[doc = " transmission per L2CAP channel."] +#[doc = ""] +#[doc = " @note The application can keep track of the available credits for transmission by following"] +#[doc = " the procedure below:"] +#[doc = " - Store initial credits given by the peer in a variable."] +#[doc = " (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)"] +#[doc = " - Decrement the variable, which stores the currently available credits, by"] +#[doc = " ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns"] +#[doc = " @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)"] +#[doc = " - Increment the variable, which stores the currently available credits, by additional"] +#[doc = " credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_L2CAP_CH_TX_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection Handle."] +#[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel."] +#[doc = " @param[in] p_sdu_buf Pointer to the SDU data buffer."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] +#[doc = " in progress for the L2CAP channel)."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than"] +#[doc = " @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in"] +#[doc = " @ref BLE_L2CAP_EVT_CH_SETUP event."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a"] +#[doc = " @ref BLE_L2CAP_EVT_CH_TX event and retry."] #[inline(always)] pub unsafe fn sd_ble_l2cap_ch_tx( - conn_handle: u16, - local_cid: u16, - p_sdu_buf: *const ble_data_t, - ) -> u32 { + conn_handle: u16, + local_cid: u16, + p_sdu_buf: *const ble_data_t, +) -> u32 { let ret: u32; asm!("svc 187", inout("r0") to_asm(conn_handle) => ret, @@ -11905,56 +11712,54 @@ pub unsafe fn sd_ble_l2cap_ch_tx( ret } - - #[doc = "@brief Advanced SDU reception flow control."] - #[doc = ""] - #[doc = " @details Adjust the way the SoftDevice issues credits to the peer."] - #[doc = " This may issue additional credits to the peer using an LE Flow Control Credit packet."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection Handle."] - #[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set"] - #[doc = " the value that will be used for newly created channels."] - #[doc = " @param[in] credits Number of credits that the SoftDevice will make sure the peer has every"] - #[doc = " time it starts using a new reception buffer."] - #[doc = " - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will"] - #[doc = " use if this function is not called."] - #[doc = " - If set to zero, the SoftDevice will stop issuing credits for new reception"] - #[doc = " buffers the application provides or has provided. SDU reception that is"] - #[doc = " currently ongoing will be allowed to complete."] - #[doc = " @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be"] - #[doc = " written by the SoftDevice with the number of credits that is or will be"] - #[doc = " available to the peer. If the value written by the SoftDevice is 0 when"] - #[doc = " credits parameter was set to 0, the peer will not be able to send more"] - #[doc = " data until more credits are provided by calling this function again with"] - #[doc = " credits > 0. This parameter is ignored when local_cid is set to"] - #[doc = " @ref BLE_L2CAP_CID_INVALID."] - #[doc = ""] - #[doc = " @note Application should take care when setting number of credits higher than default value. In"] - #[doc = " this case the application must make sure that the SoftDevice always has reception buffers"] - #[doc = " available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have"] - #[doc = " such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic"] - #[doc = " on the connection handle may be stalled until the SoftDevice again has an available"] - #[doc = " reception buffer. This applies even if the application has used this call to set the"] - #[doc = " credits back to default, or zero."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Flow control parameters accepted."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] - #[doc = " in progress for an L2CAP channel)."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] - +#[doc = "@brief Advanced SDU reception flow control."] +#[doc = ""] +#[doc = " @details Adjust the way the SoftDevice issues credits to the peer."] +#[doc = " This may issue additional credits to the peer using an LE Flow Control Credit packet."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection Handle."] +#[doc = " @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set"] +#[doc = " the value that will be used for newly created channels."] +#[doc = " @param[in] credits Number of credits that the SoftDevice will make sure the peer has every"] +#[doc = " time it starts using a new reception buffer."] +#[doc = " - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will"] +#[doc = " use if this function is not called."] +#[doc = " - If set to zero, the SoftDevice will stop issuing credits for new reception"] +#[doc = " buffers the application provides or has provided. SDU reception that is"] +#[doc = " currently ongoing will be allowed to complete."] +#[doc = " @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be"] +#[doc = " written by the SoftDevice with the number of credits that is or will be"] +#[doc = " available to the peer. If the value written by the SoftDevice is 0 when"] +#[doc = " credits parameter was set to 0, the peer will not be able to send more"] +#[doc = " data until more credits are provided by calling this function again with"] +#[doc = " credits > 0. This parameter is ignored when local_cid is set to"] +#[doc = " @ref BLE_L2CAP_CID_INVALID."] +#[doc = ""] +#[doc = " @note Application should take care when setting number of credits higher than default value. In"] +#[doc = " this case the application must make sure that the SoftDevice always has reception buffers"] +#[doc = " available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have"] +#[doc = " such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic"] +#[doc = " on the connection handle may be stalled until the SoftDevice again has an available"] +#[doc = " reception buffer. This applies even if the application has used this call to set the"] +#[doc = " credits back to default, or zero."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Flow control parameters accepted."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is"] +#[doc = " in progress for an L2CAP channel)."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND CID not found."] #[inline(always)] pub unsafe fn sd_ble_l2cap_ch_flow_control( - conn_handle: u16, - local_cid: u16, - credits: u16, - p_credits: *mut u16, - ) -> u32 { + conn_handle: u16, + local_cid: u16, + credits: u16, + p_credits: *mut u16, +) -> u32 { let ret: u32; asm!("svc 188", inout("r0") to_asm(conn_handle) => ret, @@ -13588,39 +13393,38 @@ fn bindgen_test_layout_ble_gattc_evt_t() { ); } - #[doc = "@brief Initiate or continue a GATT Primary Service Discovery procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle."] - #[doc = " If the last service has not been reached, this function must be called again with an updated start handle value to continue the search."] - #[doc = ""] - #[doc = " @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with"] - #[doc = " type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] start_handle Handle to start searching from."] - #[doc = " @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Primary Service Discovery procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle."] +#[doc = " If the last service has not been reached, this function must be called again with an updated start handle value to continue the search."] +#[doc = ""] +#[doc = " @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with"] +#[doc = " type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] start_handle Handle to start searching from."] +#[doc = " @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_primary_services_discover( - conn_handle: u16, - start_handle: u16, - p_srvc_uuid: *const ble_uuid_t, - ) -> u32 { + conn_handle: u16, + start_handle: u16, + p_srvc_uuid: *const ble_uuid_t, +) -> u32 { let ret: u32; asm!("svc 155", inout("r0") to_asm(conn_handle) => ret, @@ -13632,36 +13436,34 @@ pub unsafe fn sd_ble_gattc_primary_services_discover( ret } - - #[doc = "@brief Initiate or continue a GATT Relationship Discovery procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached,"] - #[doc = " this must be called again with an updated handle range to continue the search."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_REL_DISC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Relationship Discovery procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached,"] +#[doc = " this must be called again with an updated handle range to continue the search."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_REL_DISC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_relationships_discover( - conn_handle: u16, - p_handle_range: *const ble_gattc_handle_range_t, - ) -> u32 { + conn_handle: u16, + p_handle_range: *const ble_gattc_handle_range_t, +) -> u32 { let ret: u32; asm!("svc 156", inout("r0") to_asm(conn_handle) => ret, @@ -13673,38 +13475,36 @@ pub unsafe fn sd_ble_gattc_relationships_discover( ret } - - #[doc = "@brief Initiate or continue a GATT Characteristic Discovery procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached,"] - #[doc = " this must be called again with an updated handle range to continue the discovery."] - #[doc = ""] - #[doc = " @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with"] - #[doc = " type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Characteristic Discovery procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached,"] +#[doc = " this must be called again with an updated handle range to continue the discovery."] +#[doc = ""] +#[doc = " @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with"] +#[doc = " type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_characteristics_discover( - conn_handle: u16, - p_handle_range: *const ble_gattc_handle_range_t, - ) -> u32 { + conn_handle: u16, + p_handle_range: *const ble_gattc_handle_range_t, +) -> u32 { let ret: u32; asm!("svc 157", inout("r0") to_asm(conn_handle) => ret, @@ -13716,35 +13516,33 @@ pub unsafe fn sd_ble_gattc_characteristics_discover( ret } - - #[doc = "@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,"] - #[doc = " this must be called again with an updated handle range to continue the discovery."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_DESC_DISC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,"] +#[doc = " this must be called again with an updated handle range to continue the discovery."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_DESC_DISC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_descriptors_discover( - conn_handle: u16, - p_handle_range: *const ble_gattc_handle_range_t, - ) -> u32 { + conn_handle: u16, + p_handle_range: *const ble_gattc_handle_range_t, +) -> u32 { let ret: u32; asm!("svc 158", inout("r0") to_asm(conn_handle) => ret, @@ -13756,37 +13554,35 @@ pub unsafe fn sd_ble_gattc_descriptors_discover( ret } - - #[doc = "@brief Initiate or continue a GATT Read using Characteristic UUID procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached,"] - #[doc = " this must be called again with an updated handle range to continue the discovery."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_READ_UUID_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_uuid Pointer to a Characteristic value UUID to read."] - #[doc = " @param[in] p_handle_range A pointer to the range of handles to perform this procedure on."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Read using Characteristic UUID procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached,"] +#[doc = " this must be called again with an updated handle range to continue the discovery."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_READ_UUID_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_uuid Pointer to a Characteristic value UUID to read."] +#[doc = " @param[in] p_handle_range A pointer to the range of handles to perform this procedure on."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_char_value_by_uuid_read( - conn_handle: u16, - p_uuid: *const ble_uuid_t, - p_handle_range: *const ble_gattc_handle_range_t, - ) -> u32 { + conn_handle: u16, + p_uuid: *const ble_uuid_t, + p_handle_range: *const ble_gattc_handle_range_t, +) -> u32 { let ret: u32; asm!("svc 160", inout("r0") to_asm(conn_handle) => ret, @@ -13798,31 +13594,29 @@ pub unsafe fn sd_ble_gattc_char_value_by_uuid_read( ret } - - #[doc = "@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure."] - #[doc = ""] - #[doc = " @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor"] - #[doc = " to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the"] - #[doc = " complete value."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_READ_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_VALUE_READ_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] handle The handle of the attribute to be read."] - #[doc = " @param[in] offset Offset into the attribute value to be read."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure."] +#[doc = ""] +#[doc = " @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor"] +#[doc = " to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the"] +#[doc = " complete value."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_READ_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_VALUE_READ_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] handle The handle of the attribute to be read."] +#[doc = " @param[in] offset Offset into the attribute value to be read."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_read(conn_handle: u16, handle: u16, offset: u16) -> u32 { let ret: u32; @@ -13836,36 +13630,34 @@ pub unsafe fn sd_ble_gattc_read(conn_handle: u16, handle: u16, offset: u16) -> u ret } - - #[doc = "@brief Initiate a GATT Read Multiple Characteristic Values procedure."] - #[doc = ""] - #[doc = " @details This function initiates a GATT Read Multiple Characteristic Values procedure."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_READ_MULT_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read."] - #[doc = " @param[in] handle_count The number of handles in p_handles."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Initiate a GATT Read Multiple Characteristic Values procedure."] +#[doc = ""] +#[doc = " @details This function initiates a GATT Read Multiple Characteristic Values procedure."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_READ_MULT_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read."] +#[doc = " @param[in] handle_count The number of handles in p_handles."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_char_values_read( - conn_handle: u16, - p_handles: *const u16, - handle_count: u16, - ) -> u32 { + conn_handle: u16, + p_handles: *const u16, + handle_count: u16, +) -> u32 { let ret: u32; asm!("svc 162", inout("r0") to_asm(conn_handle) => ret, @@ -13877,56 +13669,54 @@ pub unsafe fn sd_ble_gattc_char_values_read( ret } - - #[doc = "@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure."] - #[doc = ""] - #[doc = " @details This function can perform all write procedures described in GATT."] - #[doc = ""] - #[doc = " @note Only one write with response procedure can be ongoing per connection at a time."] - #[doc = " If the application tries to write with response while another write with response procedure is ongoing,"] - #[doc = " the function call will return @ref NRF_ERROR_BUSY."] - #[doc = " A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer."] - #[doc = ""] - #[doc = " @note The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size"] - #[doc = " When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES."] - #[doc = " A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete."] - #[doc = ""] - #[doc = " @note The application can keep track of the available queue element count for writes without responses by following the procedure below:"] - #[doc = " - Store initial queue element count in a variable."] - #[doc = " - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS."] - #[doc = " - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.}"] - #[doc = " @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_write_params A pointer to a write parameters structure."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started the Write procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued."] - #[doc = " Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure."] +#[doc = ""] +#[doc = " @details This function can perform all write procedures described in GATT."] +#[doc = ""] +#[doc = " @note Only one write with response procedure can be ongoing per connection at a time."] +#[doc = " If the application tries to write with response while another write with response procedure is ongoing,"] +#[doc = " the function call will return @ref NRF_ERROR_BUSY."] +#[doc = " A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer."] +#[doc = ""] +#[doc = " @note The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size"] +#[doc = " When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES."] +#[doc = " A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete."] +#[doc = ""] +#[doc = " @note The application can keep track of the available queue element count for writes without responses by following the procedure below:"] +#[doc = " - Store initial queue element count in a variable."] +#[doc = " - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS."] +#[doc = " - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.}"] +#[doc = " @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_write_params A pointer to a write parameters structure."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started the Write procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued."] +#[doc = " Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_write( - conn_handle: u16, - p_write_params: *const ble_gattc_write_params_t, - ) -> u32 { + conn_handle: u16, + p_write_params: *const ble_gattc_write_params_t, +) -> u32 { let ret: u32; asm!("svc 163", inout("r0") to_asm(conn_handle) => ret, @@ -13938,22 +13728,20 @@ pub unsafe fn sd_ble_gattc_write( ret } - - #[doc = "@brief Send a Handle Value Confirmation to the GATT Server."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_HVI_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] handle The handle of the attribute in the indication."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed."] - #[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Send a Handle Value Confirmation to the GATT Server."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_HVI_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] handle The handle of the attribute in the indication."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed."] +#[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_hv_confirm(conn_handle: u16, handle: u16) -> u32 { let ret: u32; @@ -13967,28 +13755,26 @@ pub unsafe fn sd_ble_gattc_hv_confirm(conn_handle: u16, handle: u16) -> u32 { ret } - - #[doc = "@brief Discovers information about a range of attributes on a GATT server."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] p_handle_range The range of handles to request information about."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid connection state"] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Discovers information about a range of attributes on a GATT server."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] p_handle_range The range of handles to request information about."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid connection state"] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_attr_info_discover( - conn_handle: u16, - p_handle_range: *const ble_gattc_handle_range_t, - ) -> u32 { + conn_handle: u16, + p_handle_range: *const ble_gattc_handle_range_t, +) -> u32 { let ret: u32; asm!("svc 159", inout("r0") to_asm(conn_handle) => ret, @@ -14000,38 +13786,36 @@ pub unsafe fn sd_ble_gattc_attr_info_discover( ret } - - #[doc = "@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server."] - #[doc = ""] - #[doc = " @details The SoftDevice sets ATT_MTU to the minimum of:"] - #[doc = " - The Client RX MTU value, and"] - #[doc = " - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP."] - #[doc = ""] - #[doc = " However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTC_MTU_EXCHANGE}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] client_rx_mtu Client RX MTU size."] - #[doc = " - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT."] - #[doc = " - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration"] - #[doc = "used for this connection."] - #[doc = " - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply"] - #[doc = " if an ATT_MTU exchange has already been performed in the other direction."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully sent request to the server."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server."] +#[doc = ""] +#[doc = " @details The SoftDevice sets ATT_MTU to the minimum of:"] +#[doc = " - The Client RX MTU value, and"] +#[doc = " - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP."] +#[doc = ""] +#[doc = " However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTC_MTU_EXCHANGE}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] client_rx_mtu Client RX MTU size."] +#[doc = " - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT."] +#[doc = " - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration"] +#[doc = "used for this connection."] +#[doc = " - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply"] +#[doc = " if an ATT_MTU exchange has already been performed in the other direction."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully sent request to the server."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY Client procedure already in progress."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gattc_exchange_mtu_request(conn_handle: u16, client_rx_mtu: u16) -> u32 { let ret: u32; @@ -14045,7 +13829,6 @@ pub unsafe fn sd_ble_gattc_exchange_mtu_request(conn_handle: u16, client_rx_mtu: ret } - #[doc = "< Add a service."] pub const BLE_GATTS_SVCS_SD_BLE_GATTS_SERVICE_ADD: BLE_GATTS_SVCS = 168; #[doc = "< Add an included service."] @@ -15692,31 +15475,30 @@ fn bindgen_test_layout_ble_gatts_evt_t() { ); } - #[doc = "@brief Add a service declaration to the Attribute Table."] - #[doc = ""] - #[doc = " @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to"] - #[doc = " add a secondary service declaration that is not referenced by another service later in the Attribute Table."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES."] - #[doc = " @param[in] p_uuid Pointer to service UUID."] - #[doc = " @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully added a service declaration."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - +#[doc = "@brief Add a service declaration to the Attribute Table."] +#[doc = ""] +#[doc = " @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to"] +#[doc = " add a secondary service declaration that is not referenced by another service later in the Attribute Table."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES."] +#[doc = " @param[in] p_uuid Pointer to service UUID."] +#[doc = " @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully added a service declaration."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] #[inline(always)] pub unsafe fn sd_ble_gatts_service_add( - type_: u8, - p_uuid: *const ble_uuid_t, - p_handle: *mut u16, - ) -> u32 { + type_: u8, + p_uuid: *const ble_uuid_t, + p_handle: *mut u16, +) -> u32 { let ret: u32; asm!("svc 168", inout("r0") to_asm(type_) => ret, @@ -15728,36 +15510,34 @@ pub unsafe fn sd_ble_gatts_service_add( ret } - - #[doc = "@brief Add an include declaration to the Attribute Table."] - #[doc = ""] - #[doc = " @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time)."] - #[doc = ""] - #[doc = " @note The included service must already be present in the Attribute Table prior to this call."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] - #[doc = " @param[in] inc_srvc_handle Handle of the included service."] - #[doc = " @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully added an include declaration."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Feature is not supported, service_handle must be that of the last added service."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] - +#[doc = "@brief Add an include declaration to the Attribute Table."] +#[doc = ""] +#[doc = " @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time)."] +#[doc = ""] +#[doc = " @note The included service must already be present in the Attribute Table prior to this call."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] +#[doc = " @param[in] inc_srvc_handle Handle of the included service."] +#[doc = " @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully added an include declaration."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Feature is not supported, service_handle must be that of the last added service."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] #[inline(always)] pub unsafe fn sd_ble_gatts_include_add( - service_handle: u16, - inc_srvc_handle: u16, - p_include_handle: *mut u16, - ) -> u32 { + service_handle: u16, + inc_srvc_handle: u16, + p_include_handle: *mut u16, +) -> u32 { let ret: u32; asm!("svc 169", inout("r0") to_asm(service_handle) => ret, @@ -15769,40 +15549,38 @@ pub unsafe fn sd_ble_gatts_include_add( ret } - - #[doc = "@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table."] - #[doc = ""] - #[doc = " @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time)."] - #[doc = ""] - #[doc = " @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writable auxiliaries bits,"] - #[doc = " readable (no security) and writable (selectable) CCCDs and SCCDs and valid presentation format values."] - #[doc = ""] - #[doc = " @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] - #[doc = " @param[in] p_char_md Characteristic metadata."] - #[doc = " @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value."] - #[doc = " @param[out] p_handles Pointer to the structure where the assigned handles will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully added a characteristic."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] - +#[doc = "@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table."] +#[doc = ""] +#[doc = " @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time)."] +#[doc = ""] +#[doc = " @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writable auxiliaries bits,"] +#[doc = " readable (no security) and writable (selectable) CCCDs and SCCDs and valid presentation format values."] +#[doc = ""] +#[doc = " @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] +#[doc = " @param[in] p_char_md Characteristic metadata."] +#[doc = " @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value."] +#[doc = " @param[out] p_handles Pointer to the structure where the assigned handles will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully added a characteristic."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] #[inline(always)] pub unsafe fn sd_ble_gatts_characteristic_add( - service_handle: u16, - p_char_md: *const ble_gatts_char_md_t, - p_attr_char_value: *const ble_gatts_attr_t, - p_handles: *mut ble_gatts_char_handles_t, - ) -> u32 { + service_handle: u16, + p_char_md: *const ble_gatts_char_md_t, + p_attr_char_value: *const ble_gatts_attr_t, + p_handles: *mut ble_gatts_char_handles_t, +) -> u32 { let ret: u32; asm!("svc 170", inout("r0") to_asm(service_handle) => ret, @@ -15814,33 +15592,31 @@ pub unsafe fn sd_ble_gatts_characteristic_add( ret } - - #[doc = "@brief Add a descriptor to the Attribute Table."] - #[doc = ""] - #[doc = " @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time)."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] - #[doc = " @param[in] p_attr Pointer to the attribute structure."] - #[doc = " @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully added a descriptor."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] - +#[doc = "@brief Add a descriptor to the Attribute Table."] +#[doc = ""] +#[doc = " @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time)."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially."] +#[doc = " @param[in] p_attr Pointer to the attribute structure."] +#[doc = " @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully added a descriptor."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] #[inline(always)] pub unsafe fn sd_ble_gatts_descriptor_add( - char_handle: u16, - p_attr: *const ble_gatts_attr_t, - p_handle: *mut u16, - ) -> u32 { + char_handle: u16, + p_attr: *const ble_gatts_attr_t, + p_handle: *mut u16, +) -> u32 { let ret: u32; asm!("svc 171", inout("r0") to_asm(char_handle) => ret, @@ -15852,34 +15628,32 @@ pub unsafe fn sd_ble_gatts_descriptor_add( ret } - - #[doc = "@brief Set the value of a given attribute."] - #[doc = ""] - #[doc = " @note Values other than system attributes can be set at any time, regardless of whether any active connections exist."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute."] - #[doc = " @param[in] handle Attribute handle."] - #[doc = " @param[in,out] p_value Attribute value information."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully set the value of the attribute."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute."] - +#[doc = "@brief Set the value of a given attribute."] +#[doc = ""] +#[doc = " @note Values other than system attributes can be set at any time, regardless of whether any active connections exist."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute."] +#[doc = " @param[in] handle Attribute handle."] +#[doc = " @param[in,out] p_value Attribute value information."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully set the value of the attribute."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute."] #[inline(always)] pub unsafe fn sd_ble_gatts_value_set( - conn_handle: u16, - handle: u16, - p_value: *mut ble_gatts_value_t, - ) -> u32 { + conn_handle: u16, + handle: u16, + p_value: *mut ble_gatts_value_t, +) -> u32 { let ret: u32; asm!("svc 172", inout("r0") to_asm(conn_handle) => ret, @@ -15891,35 +15665,33 @@ pub unsafe fn sd_ble_gatts_value_set( ret } - - #[doc = "@brief Get the value of a given attribute."] - #[doc = ""] - #[doc = " @note If the attribute value is longer than the size of the supplied buffer,"] - #[doc = " @ref ble_gatts_value_t::len will return the total attribute value length (excluding offset),"] - #[doc = " and not the number of bytes actually returned in @ref ble_gatts_value_t::p_value."] - #[doc = " The application may use this information to allocate a suitable buffer size."] - #[doc = ""] - #[doc = " @note When retrieving system attribute values with this function, the connection handle"] - #[doc = " may refer to an already disconnected connection. Refer to the documentation of"] - #[doc = " @ref sd_ble_gatts_sys_attr_get for further information."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute."] - #[doc = " @param[in] handle Attribute handle."] - #[doc = " @param[in,out] p_value Attribute value information."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid attribute offset supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute."] - #[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] - +#[doc = "@brief Get the value of a given attribute."] +#[doc = ""] +#[doc = " @note If the attribute value is longer than the size of the supplied buffer,"] +#[doc = " @ref ble_gatts_value_t::len will return the total attribute value length (excluding offset),"] +#[doc = " and not the number of bytes actually returned in @ref ble_gatts_value_t::p_value."] +#[doc = " The application may use this information to allocate a suitable buffer size."] +#[doc = ""] +#[doc = " @note When retrieving system attribute values with this function, the connection handle"] +#[doc = " may refer to an already disconnected connection. Refer to the documentation of"] +#[doc = " @ref sd_ble_gatts_sys_attr_get for further information."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute."] +#[doc = " @param[in] handle Attribute handle."] +#[doc = " @param[in,out] p_value Attribute value information."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid attribute offset supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute."] +#[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] #[inline(always)] pub unsafe fn sd_ble_gatts_value_get( - conn_handle: u16, - handle: u16, - p_value: *mut ble_gatts_value_t, - ) -> u32 { + conn_handle: u16, + handle: u16, + p_value: *mut ble_gatts_value_t, +) -> u32 { let ret: u32; asm!("svc 173", inout("r0") to_asm(conn_handle) => ret, @@ -15931,72 +15703,73 @@ pub unsafe fn sd_ble_gatts_value_get( ret } - - #[doc = "@brief Notify or Indicate an attribute value."] - #[doc = ""] - #[doc = " @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation"] - #[doc = " (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that"] - #[doc = " the application can atomically perform a value update and a server initiated transaction with a single API call."] - #[doc = ""] - #[doc = " @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution."] - #[doc = " The Attribute Table has been updated if one of the following error codes is returned: @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY,"] - #[doc = " @ref NRF_ERROR_FORBIDDEN, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and @ref NRF_ERROR_RESOURCES."] - #[doc = " The caller can check whether the value has been updated by looking at the contents of *(@ref ble_gatts_hvx_params_t::p_len)."] - #[doc = ""] - #[doc = " @note Only one indication procedure can be ongoing per connection at a time."] - #[doc = " If the application tries to indicate an attribute value while another indication procedure is ongoing,"] - #[doc = " the function call will return @ref NRF_ERROR_BUSY."] - #[doc = " A @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer."] - #[doc = ""] - #[doc = " @note The number of Handle Value Notifications that can be queued is configured by @ref ble_gatts_conn_cfg_t::hvn_tx_queue_size"] - #[doc = " When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES."] - #[doc = " A @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event will be issued as soon as the transmission of the notification is complete."] - #[doc = ""] - #[doc = " @note The application can keep track of the available queue element count for notifications by following the procedure below:"] - #[doc = " - Store initial queue element count in a variable."] - #[doc = " - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS."] - #[doc = " - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTS_EVT_HVN_TX_COMPLETE, Notification transmission complete.}"] - #[doc = " @event{@ref BLE_GATTS_EVT_HVC, Confirmation received from the peer.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_HVN_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_HVI_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_HVX_DISABLED_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in,out] p_hvx_params Pointer to an HVx parameters structure. If @ref ble_gatts_hvx_params_t::p_data"] - #[doc = " contains a non-NULL pointer the attribute value will be updated with the contents"] - #[doc = " pointed by it before sending the notification or indication. If the attribute value"] - #[doc = " is updated, @ref ble_gatts_hvx_params_t::p_len is updated by the SoftDevice to"] - #[doc = " contain the number of actual bytes written, else it will be set to 0."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:"] - #[doc = " - Invalid Connection State"] - #[doc = " - Notifications and/or indications not enabled in the CCCD"] - #[doc = " - An ATT_MTU exchange is ongoing"] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate."] - #[doc = " @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN The connection's current security level is lower than the one required by the write permissions of the CCCD associated with this characteristic."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY For @ref BLE_GATT_HVX_INDICATION Procedure already in progress. Wait for a @ref BLE_GATTS_EVT_HVC event and retry."] - #[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] - #[doc = " @retval ::NRF_ERROR_RESOURCES Too many notifications queued."] - #[doc = " Wait for a @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event and retry."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Notify or Indicate an attribute value."] +#[doc = ""] +#[doc = " @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation"] +#[doc = " (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that"] +#[doc = " the application can atomically perform a value update and a server initiated transaction with a single API call."] +#[doc = ""] +#[doc = " @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution."] +#[doc = " The Attribute Table has been updated if one of the following error codes is returned: @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY,"] +#[doc = " @ref NRF_ERROR_FORBIDDEN, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and @ref NRF_ERROR_RESOURCES."] +#[doc = " The caller can check whether the value has been updated by looking at the contents of *(@ref ble_gatts_hvx_params_t::p_len)."] +#[doc = ""] +#[doc = " @note Only one indication procedure can be ongoing per connection at a time."] +#[doc = " If the application tries to indicate an attribute value while another indication procedure is ongoing,"] +#[doc = " the function call will return @ref NRF_ERROR_BUSY."] +#[doc = " A @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer."] +#[doc = ""] +#[doc = " @note The number of Handle Value Notifications that can be queued is configured by @ref ble_gatts_conn_cfg_t::hvn_tx_queue_size"] +#[doc = " When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES."] +#[doc = " A @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event will be issued as soon as the transmission of the notification is complete."] +#[doc = ""] +#[doc = " @note The application can keep track of the available queue element count for notifications by following the procedure below:"] +#[doc = " - Store initial queue element count in a variable."] +#[doc = " - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS."] +#[doc = " - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTS_EVT_HVN_TX_COMPLETE, Notification transmission complete.}"] +#[doc = " @event{@ref BLE_GATTS_EVT_HVC, Confirmation received from the peer.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_HVN_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_HVI_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_HVX_DISABLED_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in,out] p_hvx_params Pointer to an HVx parameters structure. If @ref ble_gatts_hvx_params_t::p_data"] +#[doc = " contains a non-NULL pointer the attribute value will be updated with the contents"] +#[doc = " pointed by it before sending the notification or indication. If the attribute value"] +#[doc = " is updated, @ref ble_gatts_hvx_params_t::p_len is updated by the SoftDevice to"] +#[doc = " contain the number of actual bytes written, else it will be set to 0."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:"] +#[doc = " - Invalid Connection State"] +#[doc = " - Notifications and/or indications not enabled in the CCCD"] +#[doc = " - An ATT_MTU exchange is ongoing"] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate."] +#[doc = " @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute not found."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN The connection's current security level is lower than the one required by the write permissions of the CCCD associated with this characteristic."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY For @ref BLE_GATT_HVX_INDICATION Procedure already in progress. Wait for a @ref BLE_GATTS_EVT_HVC event and retry."] +#[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] +#[doc = " @retval ::NRF_ERROR_RESOURCES Too many notifications queued."] +#[doc = " Wait for a @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event and retry."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] -pub unsafe fn sd_ble_gatts_hvx(conn_handle: u16, p_hvx_params: *const ble_gatts_hvx_params_t) -> u32 { +pub unsafe fn sd_ble_gatts_hvx( + conn_handle: u16, + p_hvx_params: *const ble_gatts_hvx_params_t, +) -> u32 { let ret: u32; asm!("svc 174", inout("r0") to_asm(conn_handle) => ret, @@ -16008,47 +15781,45 @@ pub unsafe fn sd_ble_gatts_hvx(conn_handle: u16, p_hvx_params: *const ble_gatts_ ret } - - #[doc = "@brief Indicate the Service Changed attribute value."] - #[doc = ""] - #[doc = " @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute"] - #[doc = " Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will"] - #[doc = " be issued."] - #[doc = ""] - #[doc = " @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here."] - #[doc = ""] - #[doc = " @events"] - #[doc = " @event{@ref BLE_GATTS_EVT_SC_CONFIRM, Confirmation of attribute table change received from peer.}"] - #[doc = " @endevents"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_SC_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] start_handle Start of affected attribute handle range."] - #[doc = " @param[in] end_handle End of affected attribute handle range."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Service Changed not enabled at initialization. See @ref"] - #[doc = " sd_ble_cfg_set and @ref ble_gatts_cfg_service_changed_t."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:"] - #[doc = " - Invalid Connection State"] - #[doc = " - Notifications and/or indications not enabled in the CCCD"] - #[doc = " - An ATT_MTU exchange is ongoing"] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application."] - #[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress."] - #[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Indicate the Service Changed attribute value."] +#[doc = ""] +#[doc = " @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute"] +#[doc = " Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will"] +#[doc = " be issued."] +#[doc = ""] +#[doc = " @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here."] +#[doc = ""] +#[doc = " @events"] +#[doc = " @event{@ref BLE_GATTS_EVT_SC_CONFIRM, Confirmation of attribute table change received from peer.}"] +#[doc = " @endevents"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_SC_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] start_handle Start of affected attribute handle range."] +#[doc = " @param[in] end_handle End of affected attribute handle range."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED Service Changed not enabled at initialization. See @ref"] +#[doc = " sd_ble_cfg_set and @ref ble_gatts_cfg_service_changed_t."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:"] +#[doc = " - Invalid Connection State"] +#[doc = " - Notifications and/or indications not enabled in the CCCD"] +#[doc = " - An ATT_MTU exchange is ongoing"] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application."] +#[doc = " @retval ::NRF_ERROR_BUSY Procedure already in progress."] +#[doc = " @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gatts_service_changed( - conn_handle: u16, - start_handle: u16, - end_handle: u16, - ) -> u32 { + conn_handle: u16, + start_handle: u16, + end_handle: u16, +) -> u32 { let ret: u32; asm!("svc 175", inout("r0") to_asm(conn_handle) => ret, @@ -16060,43 +15831,41 @@ pub unsafe fn sd_ble_gatts_service_changed( ret } - - #[doc = "@brief Respond to a Read/Write authorization request."] - #[doc = ""] - #[doc = " @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_READ_REQ_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_WRITE_REQ_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application."] - #[doc = ""] - #[doc = " @note @ref ble_gatts_authorize_params_t::p_data is ignored when this function is used to respond"] - #[doc = " to a @ref BLE_GATTS_AUTHORIZE_TYPE_READ event if @ref ble_gatts_authorize_params_t::update"] - #[doc = " is set to 0."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid,"] - #[doc = " handle supplied does not match requested handle,"] - #[doc = " or invalid data to be written provided by the application."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Respond to a Read/Write authorization request."] +#[doc = ""] +#[doc = " @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_READ_REQ_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_WRITE_REQ_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application."] +#[doc = ""] +#[doc = " @note @ref ble_gatts_authorize_params_t::p_data is ignored when this function is used to respond"] +#[doc = " to a @ref BLE_GATTS_AUTHORIZE_TYPE_READ event if @ref ble_gatts_authorize_params_t::update"] +#[doc = " is set to 0."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid,"] +#[doc = " handle supplied does not match requested handle,"] +#[doc = " or invalid data to be written provided by the application."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gatts_rw_authorize_reply( - conn_handle: u16, - p_rw_authorize_reply_params: *const ble_gatts_rw_authorize_reply_params_t, - ) -> u32 { + conn_handle: u16, + p_rw_authorize_reply_params: *const ble_gatts_rw_authorize_reply_params_t, +) -> u32 { let ret: u32; asm!("svc 176", inout("r0") to_asm(conn_handle) => ret, @@ -16108,55 +15877,53 @@ pub unsafe fn sd_ble_gatts_rw_authorize_reply( ret } - - #[doc = "@brief Update persistent system attribute information."] - #[doc = ""] - #[doc = " @details Supply information about persistent system attributes to the stack,"] - #[doc = " previously obtained using @ref sd_ble_gatts_sys_attr_get."] - #[doc = " This call is only allowed for active connections, and is usually"] - #[doc = " made immediately after a connection is established with an known bonded device,"] - #[doc = " often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING."] - #[doc = ""] - #[doc = " p_sysattrs may point directly to the application's stored copy of the system attributes"] - #[doc = " obtained using @ref sd_ble_gatts_sys_attr_get."] - #[doc = " If the pointer is NULL, the system attribute info is initialized, assuming that"] - #[doc = " the application does not have any previously saved system attribute data for this device."] - #[doc = ""] - #[doc = " @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration."] - #[doc = ""] - #[doc = " @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially."] - #[doc = " This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or"] - #[doc = " reset the SoftDevice to return to a known state."] - #[doc = ""] - #[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified."] - #[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL."] - #[doc = " @param[in] len Size of data pointed by p_sys_attr_data, in octets."] - #[doc = " @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully set the system attribute information."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get."] - #[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] - +#[doc = "@brief Update persistent system attribute information."] +#[doc = ""] +#[doc = " @details Supply information about persistent system attributes to the stack,"] +#[doc = " previously obtained using @ref sd_ble_gatts_sys_attr_get."] +#[doc = " This call is only allowed for active connections, and is usually"] +#[doc = " made immediately after a connection is established with an known bonded device,"] +#[doc = " often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING."] +#[doc = ""] +#[doc = " p_sysattrs may point directly to the application's stored copy of the system attributes"] +#[doc = " obtained using @ref sd_ble_gatts_sys_attr_get."] +#[doc = " If the pointer is NULL, the system attribute info is initialized, assuming that"] +#[doc = " the application does not have any previously saved system attribute data for this device."] +#[doc = ""] +#[doc = " @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration."] +#[doc = ""] +#[doc = " @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially."] +#[doc = " This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or"] +#[doc = " reset the SoftDevice to return to a known state."] +#[doc = ""] +#[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified."] +#[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL."] +#[doc = " @param[in] len Size of data pointed by p_sys_attr_data, in octets."] +#[doc = " @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully set the system attribute information."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get."] +#[doc = " @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation."] #[inline(always)] pub unsafe fn sd_ble_gatts_sys_attr_set( - conn_handle: u16, - p_sys_attr_data: *const u8, - len: u16, - flags: u32, - ) -> u32 { + conn_handle: u16, + p_sys_attr_data: *const u8, + len: u16, + flags: u32, +) -> u32 { let ret: u32; asm!("svc 177", inout("r0") to_asm(conn_handle) => ret, @@ -16168,44 +15935,42 @@ pub unsafe fn sd_ble_gatts_sys_attr_set( ret } - - #[doc = "@brief Retrieve persistent system attribute information from the stack."] - #[doc = ""] - #[doc = " @details This call is used to retrieve information about values to be stored persistently by the application"] - #[doc = " during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device,"] - #[doc = " the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set."] - #[doc = " If retrieved after disconnection, the data should be read before a new connection established. The connection handle for"] - #[doc = " the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it."] - #[doc = " Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes"] - #[doc = " may be written to at any time by the peer during a connection's lifetime."] - #[doc = ""] - #[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned."] - #[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle of the recently terminated connection."] - #[doc = " @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. The format of the data is described"] - #[doc = " in @ref BLE_GATTS_SYS_ATTRS_FORMAT. NULL can be provided to obtain the length of the data."] - #[doc = " @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditionally updated to actual length of system attribute data."] - #[doc = " @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully retrieved the system attribute information."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND No system attributes found."] - +#[doc = "@brief Retrieve persistent system attribute information from the stack."] +#[doc = ""] +#[doc = " @details This call is used to retrieve information about values to be stored persistently by the application"] +#[doc = " during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device,"] +#[doc = " the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set."] +#[doc = " If retrieved after disconnection, the data should be read before a new connection established. The connection handle for"] +#[doc = " the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it."] +#[doc = " Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes"] +#[doc = " may be written to at any time by the peer during a connection's lifetime."] +#[doc = ""] +#[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned."] +#[doc = " @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle of the recently terminated connection."] +#[doc = " @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. The format of the data is described"] +#[doc = " in @ref BLE_GATTS_SYS_ATTRS_FORMAT. NULL can be provided to obtain the length of the data."] +#[doc = " @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditionally updated to actual length of system attribute data."] +#[doc = " @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully retrieved the system attribute information."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND No system attributes found."] #[inline(always)] pub unsafe fn sd_ble_gatts_sys_attr_get( - conn_handle: u16, - p_sys_attr_data: *mut u8, - p_len: *mut u16, - flags: u32, - ) -> u32 { + conn_handle: u16, + p_sys_attr_data: *mut u8, + p_len: *mut u16, + flags: u32, +) -> u32 { let ret: u32; asm!("svc 178", inout("r0") to_asm(conn_handle) => ret, @@ -16217,14 +15982,12 @@ pub unsafe fn sd_ble_gatts_sys_attr_get( ret } - - #[doc = "@brief Retrieve the first valid user attribute handle."] - #[doc = ""] - #[doc = " @param[out] p_handle Pointer to an integer where the handle will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully retrieved the handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - +#[doc = "@brief Retrieve the first valid user attribute handle."] +#[doc = ""] +#[doc = " @param[out] p_handle Pointer to an integer where the handle will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully retrieved the handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] #[inline(always)] pub unsafe fn sd_ble_gatts_initial_user_handle_get(p_handle: *mut u16) -> u32 { let ret: u32; @@ -16238,24 +16001,22 @@ pub unsafe fn sd_ble_gatts_initial_user_handle_get(p_handle: *mut u16) -> u32 { ret } - - #[doc = "@brief Retrieve the attribute UUID and/or metadata."] - #[doc = ""] - #[doc = " @param[in] handle Attribute handle"] - #[doc = " @param[out] p_uuid UUID of the attribute. Use NULL to omit this field."] - #[doc = " @param[out] p_md Metadata of the attribute. Use NULL to omit this field."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully retrieved the attribute metadata,"] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. Returned when both @c p_uuid and @c p_md are NULL."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute was not found."] - +#[doc = "@brief Retrieve the attribute UUID and/or metadata."] +#[doc = ""] +#[doc = " @param[in] handle Attribute handle"] +#[doc = " @param[out] p_uuid UUID of the attribute. Use NULL to omit this field."] +#[doc = " @param[out] p_md Metadata of the attribute. Use NULL to omit this field."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully retrieved the attribute metadata,"] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. Returned when both @c p_uuid and @c p_md are NULL."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND Attribute was not found."] #[inline(always)] pub unsafe fn sd_ble_gatts_attr_get( - handle: u16, - p_uuid: *mut ble_uuid_t, - p_md: *mut ble_gatts_attr_md_t, - ) -> u32 { + handle: u16, + p_uuid: *mut ble_uuid_t, + p_md: *mut ble_gatts_attr_md_t, +) -> u32 { let ret: u32; asm!("svc 180", inout("r0") to_asm(handle) => ret, @@ -16267,35 +16028,33 @@ pub unsafe fn sd_ble_gatts_attr_get( ret } - - #[doc = "@brief Reply to an ATT_MTU exchange request by sending an Exchange MTU Response to the client."] - #[doc = ""] - #[doc = " @details This function is only used to reply to a @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event."] - #[doc = ""] - #[doc = " @details The SoftDevice sets ATT_MTU to the minimum of:"] - #[doc = " - The Client RX MTU value from @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, and"] - #[doc = " - The Server RX MTU value."] - #[doc = ""] - #[doc = " However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_MTU_EXCHANGE}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] - #[doc = " @param[in] server_rx_mtu Server RX MTU size."] - #[doc = " - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT."] - #[doc = " - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration"] - #[doc = " used for this connection."] - #[doc = " - The value must be equal to Client RX MTU size given in @ref sd_ble_gattc_exchange_mtu_request"] - #[doc = " if an ATT_MTU exchange has already been performed in the other direction."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully sent response to the client."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no ATT_MTU exchange request pending."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid Server RX MTU size supplied."] - #[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] - +#[doc = "@brief Reply to an ATT_MTU exchange request by sending an Exchange MTU Response to the client."] +#[doc = ""] +#[doc = " @details This function is only used to reply to a @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event."] +#[doc = ""] +#[doc = " @details The SoftDevice sets ATT_MTU to the minimum of:"] +#[doc = " - The Client RX MTU value from @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, and"] +#[doc = " - The Server RX MTU value."] +#[doc = ""] +#[doc = " However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_MTU_EXCHANGE}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @param[in] conn_handle The connection handle identifying the connection to perform this procedure on."] +#[doc = " @param[in] server_rx_mtu Server RX MTU size."] +#[doc = " - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT."] +#[doc = " - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration"] +#[doc = " used for this connection."] +#[doc = " - The value must be equal to Client RX MTU size given in @ref sd_ble_gattc_exchange_mtu_request"] +#[doc = " if an ATT_MTU exchange has already been performed in the other direction."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully sent response to the client."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no ATT_MTU exchange request pending."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid Server RX MTU size supplied."] +#[doc = " @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection."] #[inline(always)] pub unsafe fn sd_ble_gatts_exchange_mtu_reply(conn_handle: u16, server_rx_mtu: u16) -> u32 { let ret: u32; @@ -17471,38 +17230,37 @@ fn bindgen_test_layout_ble_cfg_t() { ); } - #[doc = "@brief Enable the BLE stack"] - #[doc = ""] - #[doc = " @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the"] - #[doc = " application RAM region (APP_RAM_BASE). On return, this will"] - #[doc = " contain the minimum start address of the application RAM region"] - #[doc = " required by the SoftDevice for this configuration."] - #[doc = ""] - #[doc = " @note The memory requirement for a specific configuration will not increase between SoftDevices"] - #[doc = " with the same major version number."] - #[doc = ""] - #[doc = " @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located"] - #[doc = " between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between"] - #[doc = " APP_RAM_BASE and the start of the call stack."] - #[doc = ""] - #[doc = " @details This call initializes the BLE stack, no BLE related function other than @ref"] - #[doc = " sd_ble_cfg_set can be called before this one."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_COMMON_ENABLE}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The BLE stack has been initialized successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] - #[doc = " @retval ::NRF_ERROR_NO_MEM One or more of the following is true:"] - #[doc = " - The amount of memory assigned to the SoftDevice by *p_app_ram_base is not"] - #[doc = " large enough to fit this configuration's memory requirement. Check *p_app_ram_base"] - #[doc = " and set the start address of the application RAM region accordingly."] - #[doc = " - Dynamic part of the SoftDevice RAM region is larger then 64 kB which"] - #[doc = " is currently not supported."] - #[doc = " @retval ::NRF_ERROR_RESOURCES The total number of L2CAP Channels configured using @ref sd_ble_cfg_set is too large."] - +#[doc = "@brief Enable the BLE stack"] +#[doc = ""] +#[doc = " @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the"] +#[doc = " application RAM region (APP_RAM_BASE). On return, this will"] +#[doc = " contain the minimum start address of the application RAM region"] +#[doc = " required by the SoftDevice for this configuration."] +#[doc = ""] +#[doc = " @note The memory requirement for a specific configuration will not increase between SoftDevices"] +#[doc = " with the same major version number."] +#[doc = ""] +#[doc = " @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located"] +#[doc = " between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between"] +#[doc = " APP_RAM_BASE and the start of the call stack."] +#[doc = ""] +#[doc = " @details This call initializes the BLE stack, no BLE related function other than @ref"] +#[doc = " sd_ble_cfg_set can be called before this one."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_COMMON_ENABLE}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The BLE stack has been initialized successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] +#[doc = " @retval ::NRF_ERROR_NO_MEM One or more of the following is true:"] +#[doc = " - The amount of memory assigned to the SoftDevice by *p_app_ram_base is not"] +#[doc = " large enough to fit this configuration's memory requirement. Check *p_app_ram_base"] +#[doc = " and set the start address of the application RAM region accordingly."] +#[doc = " - Dynamic part of the SoftDevice RAM region is larger then 64 kB which"] +#[doc = " is currently not supported."] +#[doc = " @retval ::NRF_ERROR_RESOURCES The total number of L2CAP Channels configured using @ref sd_ble_cfg_set is too large."] #[inline(always)] pub unsafe fn sd_ble_enable(p_app_ram_base: *mut u32) -> u32 { let ret: u32; @@ -17516,41 +17274,39 @@ pub unsafe fn sd_ble_enable(p_app_ram_base: *mut u32) -> u32 { ret } - - #[doc = "@brief Add configurations for the BLE stack"] - #[doc = ""] - #[doc = " @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref"] - #[doc = " BLE_GAP_CFGS or @ref BLE_GATTS_CFGS."] - #[doc = " @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value."] - #[doc = " @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE)."] - #[doc = " See @ref sd_ble_enable for details about APP_RAM_BASE."] - #[doc = ""] - #[doc = " @note The memory requirement for a specific configuration will not increase between SoftDevices"] - #[doc = " with the same major version number."] - #[doc = ""] - #[doc = " @note If a configuration is set more than once, the last one set is the one that takes effect on"] - #[doc = " @ref sd_ble_enable."] - #[doc = ""] - #[doc = " @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default"] - #[doc = " configuration."] - #[doc = ""] - #[doc = " @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref"] - #[doc = " sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref"] - #[doc = " sd_ble_enable)."] - #[doc = ""] - #[doc = " @note Error codes for the configurations are described in the configuration structs."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_COMMON_ENABLE}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS The configuration has been added successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied."] - #[doc = " @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not"] - #[doc = " large enough to fit this configuration's memory requirement."] - +#[doc = "@brief Add configurations for the BLE stack"] +#[doc = ""] +#[doc = " @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref"] +#[doc = " BLE_GAP_CFGS or @ref BLE_GATTS_CFGS."] +#[doc = " @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value."] +#[doc = " @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE)."] +#[doc = " See @ref sd_ble_enable for details about APP_RAM_BASE."] +#[doc = ""] +#[doc = " @note The memory requirement for a specific configuration will not increase between SoftDevices"] +#[doc = " with the same major version number."] +#[doc = ""] +#[doc = " @note If a configuration is set more than once, the last one set is the one that takes effect on"] +#[doc = " @ref sd_ble_enable."] +#[doc = ""] +#[doc = " @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default"] +#[doc = " configuration."] +#[doc = ""] +#[doc = " @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref"] +#[doc = " sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref"] +#[doc = " sd_ble_enable)."] +#[doc = ""] +#[doc = " @note Error codes for the configurations are described in the configuration structs."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_COMMON_ENABLE}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS The configuration has been added successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied."] +#[doc = " @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not"] +#[doc = " large enough to fit this configuration's memory requirement."] #[inline(always)] pub unsafe fn sd_ble_cfg_set(cfg_id: u32, p_cfg: *const ble_cfg_t, app_ram_base: u32) -> u32 { let ret: u32; @@ -17564,43 +17320,41 @@ pub unsafe fn sd_ble_cfg_set(cfg_id: u32, p_cfg: *const ble_cfg_t, app_ram_base: ret } - - #[doc = "@brief Get an event from the pending events queue."] - #[doc = ""] - #[doc = " @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length."] - #[doc = " This buffer <b>must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT</b>."] - #[doc = " The buffer should be interpreted as a @ref ble_evt_t struct."] - #[doc = " @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length."] - #[doc = ""] - #[doc = " @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that"] - #[doc = " an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt."] - #[doc = " The application is free to choose whether to call this function from thread mode (main context) or directly from the"] - #[doc = " Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher"] - #[doc = " priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned)"] - #[doc = " every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so"] - #[doc = " could potentially leave events in the internal queue without the application being aware of this fact."] - #[doc = ""] - #[doc = " Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to"] - #[doc = " be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event,"] - #[doc = " @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size."] - #[doc = " The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also \"peek\" the event length"] - #[doc = " by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return:"] - #[doc = ""] - #[doc = " \\code"] - #[doc = " uint16_t len;"] - #[doc = " errcode = sd_ble_evt_get(NULL, &len);"] - #[doc = " \\endcode"] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC}"] - #[doc = " @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled."] - #[doc = " @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer."] - +#[doc = "@brief Get an event from the pending events queue."] +#[doc = ""] +#[doc = " @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length."] +#[doc = " This buffer <b>must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT</b>."] +#[doc = " The buffer should be interpreted as a @ref ble_evt_t struct."] +#[doc = " @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length."] +#[doc = ""] +#[doc = " @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that"] +#[doc = " an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt."] +#[doc = " The application is free to choose whether to call this function from thread mode (main context) or directly from the"] +#[doc = " Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher"] +#[doc = " priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned)"] +#[doc = " every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so"] +#[doc = " could potentially leave events in the internal queue without the application being aware of this fact."] +#[doc = ""] +#[doc = " Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to"] +#[doc = " be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event,"] +#[doc = " @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size."] +#[doc = " The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also \"peek\" the event length"] +#[doc = " by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return:"] +#[doc = ""] +#[doc = " \\code"] +#[doc = " uint16_t len;"] +#[doc = " errcode = sd_ble_evt_get(NULL, &len);"] +#[doc = " \\endcode"] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC}"] +#[doc = " @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled."] +#[doc = " @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer."] #[inline(always)] pub unsafe fn sd_ble_evt_get(p_dest: *mut u8, p_len: *mut u16) -> u32 { let ret: u32; @@ -17614,33 +17368,31 @@ pub unsafe fn sd_ble_evt_get(p_dest: *mut u8, p_len: *mut u16) -> u32 { ret } - - #[doc = "@brief Add a Vendor Specific base UUID."] - #[doc = ""] - #[doc = " @details This call enables the application to add a Vendor Specific base UUID to the BLE stack's table, for later"] - #[doc = " use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t"] - #[doc = " format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code"] - #[doc = " paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses"] - #[doc = " for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to"] - #[doc = " @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field"] - #[doc = " in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to"] - #[doc = " the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,"] - #[doc = " although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array."] - #[doc = ""] - #[doc = " @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by"] - #[doc = " the 16-bit uuid field in @ref ble_uuid_t."] - #[doc = ""] - #[doc = " @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in"] - #[doc = " p_uuid_type along with an @ref NRF_SUCCESS error code."] - #[doc = ""] - #[doc = " @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific base UUID disregarding"] - #[doc = " bytes 12 and 13."] - #[doc = " @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully added the Vendor Specific base UUID."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid."] - #[doc = " @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs."] - +#[doc = "@brief Add a Vendor Specific base UUID."] +#[doc = ""] +#[doc = " @details This call enables the application to add a Vendor Specific base UUID to the BLE stack's table, for later"] +#[doc = " use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t"] +#[doc = " format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code"] +#[doc = " paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses"] +#[doc = " for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to"] +#[doc = " @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field"] +#[doc = " in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to"] +#[doc = " the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,"] +#[doc = " although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array."] +#[doc = ""] +#[doc = " @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by"] +#[doc = " the 16-bit uuid field in @ref ble_uuid_t."] +#[doc = ""] +#[doc = " @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in"] +#[doc = " p_uuid_type along with an @ref NRF_SUCCESS error code."] +#[doc = ""] +#[doc = " @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific base UUID disregarding"] +#[doc = " bytes 12 and 13."] +#[doc = " @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully added the Vendor Specific base UUID."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid."] +#[doc = " @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs."] #[inline(always)] pub unsafe fn sd_ble_uuid_vs_add(p_vs_uuid: *const ble_uuid128_t, p_uuid_type: *mut u8) -> u32 { let ret: u32; @@ -17654,25 +17406,23 @@ pub unsafe fn sd_ble_uuid_vs_add(p_vs_uuid: *const ble_uuid128_t, p_uuid_type: * ret } - - #[doc = "@brief Remove a Vendor Specific base UUID."] - #[doc = ""] - #[doc = " @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows"] - #[doc = " the application to reuse memory allocated for Vendor Specific base UUIDs."] - #[doc = ""] - #[doc = " @note Currently this function can only be called with a p_uuid_type set to @ref BLE_UUID_TYPE_UNKNOWN or the last added UUID type."] - #[doc = ""] - #[doc = " @param[inout] p_uuid_type Pointer to a uint8_t where its value matches the UUID type in @ref ble_uuid_t::type to be removed."] - #[doc = " If the type is set to @ref BLE_UUID_TYPE_UNKNOWN, or the pointer is NULL, the last Vendor Specific"] - #[doc = " base UUID will be removed. If the function returns successfully, the UUID type that was removed will"] - #[doc = " be written back to @p p_uuid_type. If function returns with a failure, it contains the last type that"] - #[doc = " is in use by the ATT Server."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully removed the Vendor Specific base UUID."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR If p_uuid_type is invalid."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM If p_uuid_type points to a non-valid UUID type."] - #[doc = " @retval ::NRF_ERROR_FORBIDDEN If the Vendor Specific base UUID is in use by the ATT Server."] - +#[doc = "@brief Remove a Vendor Specific base UUID."] +#[doc = ""] +#[doc = " @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows"] +#[doc = " the application to reuse memory allocated for Vendor Specific base UUIDs."] +#[doc = ""] +#[doc = " @note Currently this function can only be called with a p_uuid_type set to @ref BLE_UUID_TYPE_UNKNOWN or the last added UUID type."] +#[doc = ""] +#[doc = " @param[inout] p_uuid_type Pointer to a uint8_t where its value matches the UUID type in @ref ble_uuid_t::type to be removed."] +#[doc = " If the type is set to @ref BLE_UUID_TYPE_UNKNOWN, or the pointer is NULL, the last Vendor Specific"] +#[doc = " base UUID will be removed. If the function returns successfully, the UUID type that was removed will"] +#[doc = " be written back to @p p_uuid_type. If function returns with a failure, it contains the last type that"] +#[doc = " is in use by the ATT Server."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully removed the Vendor Specific base UUID."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR If p_uuid_type is invalid."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM If p_uuid_type points to a non-valid UUID type."] +#[doc = " @retval ::NRF_ERROR_FORBIDDEN If the Vendor Specific base UUID is in use by the ATT Server."] #[inline(always)] pub unsafe fn sd_ble_uuid_vs_remove(p_uuid_type: *mut u8) -> u32 { let ret: u32; @@ -17686,31 +17436,29 @@ pub unsafe fn sd_ble_uuid_vs_remove(p_uuid_type: *mut u8) -> u32 { ret } - - #[doc = " @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure."] - #[doc = ""] - #[doc = " @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared"] - #[doc = " to the corresponding ones in each entry of the table of Vendor Specific base UUIDs populated with @ref sd_ble_uuid_vs_add"] - #[doc = " to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index"] - #[doc = " relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type."] - #[doc = ""] - #[doc = " @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE."] - #[doc = ""] - #[doc = " @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes)."] - #[doc = " @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes."] - #[doc = " @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length."] - #[doc = " @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs."] - +#[doc = " @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure."] +#[doc = ""] +#[doc = " @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared"] +#[doc = " to the corresponding ones in each entry of the table of Vendor Specific base UUIDs populated with @ref sd_ble_uuid_vs_add"] +#[doc = " to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index"] +#[doc = " relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type."] +#[doc = ""] +#[doc = " @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE."] +#[doc = ""] +#[doc = " @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes)."] +#[doc = " @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes."] +#[doc = " @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length."] +#[doc = " @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs."] #[inline(always)] pub unsafe fn sd_ble_uuid_decode( - uuid_le_len: u8, - p_uuid_le: *const u8, - p_uuid: *mut ble_uuid_t, - ) -> u32 { + uuid_le_len: u8, + p_uuid_le: *const u8, + p_uuid: *mut ble_uuid_t, +) -> u32 { let ret: u32; asm!("svc 99", inout("r0") to_asm(uuid_le_len) => ret, @@ -17722,25 +17470,23 @@ pub unsafe fn sd_ble_uuid_decode( ret } - - #[doc = " @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit)."] - #[doc = ""] - #[doc = " @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed."] - #[doc = ""] - #[doc = " @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes."] - #[doc = " @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes)."] - #[doc = " @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully encoded into the buffer."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type."] - +#[doc = " @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit)."] +#[doc = ""] +#[doc = " @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed."] +#[doc = ""] +#[doc = " @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes."] +#[doc = " @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes)."] +#[doc = " @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully encoded into the buffer."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type."] #[inline(always)] pub unsafe fn sd_ble_uuid_encode( - p_uuid: *const ble_uuid_t, - p_uuid_le_len: *mut u8, - p_uuid_le: *mut u8, - ) -> u32 { + p_uuid: *const ble_uuid_t, + p_uuid_le_len: *mut u8, + p_uuid_le: *mut u8, +) -> u32 { let ret: u32; asm!("svc 100", inout("r0") to_asm(p_uuid) => ret, @@ -17752,17 +17498,15 @@ pub unsafe fn sd_ble_uuid_encode( ret } - - #[doc = "@brief Get Version Information."] - #[doc = ""] - #[doc = " @details This call allows the application to get the BLE stack version information."] - #[doc = ""] - #[doc = " @param[out] p_version Pointer to a ble_version_t structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Version information stored successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure)."] - +#[doc = "@brief Get Version Information."] +#[doc = ""] +#[doc = " @details This call allows the application to get the BLE stack version information."] +#[doc = ""] +#[doc = " @param[out] p_version Pointer to a ble_version_t structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Version information stored successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure)."] #[inline(always)] pub unsafe fn sd_ble_version_get(p_version: *mut ble_version_t) -> u32 { let ret: u32; @@ -17776,30 +17520,28 @@ pub unsafe fn sd_ble_version_get(p_version: *mut ble_version_t) -> u32 { ret } - - #[doc = "@brief Provide a user memory block."] - #[doc = ""] - #[doc = " @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application."] - #[doc = ""] - #[doc = " @param[in] conn_handle Connection handle."] - #[doc = " @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application."] - #[doc = ""] - #[doc = " @mscs"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC}"] - #[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] - #[doc = " @endmscs"] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Successfully queued a response to the peer."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending."] - +#[doc = "@brief Provide a user memory block."] +#[doc = ""] +#[doc = " @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application."] +#[doc = ""] +#[doc = " @param[in] conn_handle Connection handle."] +#[doc = " @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application."] +#[doc = ""] +#[doc = " @mscs"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC}"] +#[doc = " @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}"] +#[doc = " @endmscs"] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Successfully queued a response to the peer."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending."] #[inline(always)] pub unsafe fn sd_ble_user_mem_reply(conn_handle: u16, p_block: *const ble_user_mem_block_t) -> u32 { let ret: u32; @@ -17813,21 +17555,19 @@ pub unsafe fn sd_ble_user_mem_reply(conn_handle: u16, p_block: *const ble_user_m ret } - - #[doc = "@brief Set a BLE option."] - #[doc = ""] - #[doc = " @details This call allows the application to set the value of an option."] - #[doc = ""] - #[doc = " @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS."] - #[doc = " @param[in] p_opt Pointer to a ble_opt_t structure containing the option value."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Option set successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time."] - #[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed."] - +#[doc = "@brief Set a BLE option."] +#[doc = ""] +#[doc = " @details This call allows the application to set the value of an option."] +#[doc = ""] +#[doc = " @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS."] +#[doc = " @param[in] p_opt Pointer to a ble_opt_t structure containing the option value."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Option set successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time."] +#[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed."] #[inline(always)] pub unsafe fn sd_ble_opt_set(opt_id: u32, p_opt: *const ble_opt_t) -> u32 { let ret: u32; @@ -17841,23 +17581,21 @@ pub unsafe fn sd_ble_opt_set(opt_id: u32, p_opt: *const ble_opt_t) -> u32 { ret } - - #[doc = "@brief Get a BLE option."] - #[doc = ""] - #[doc = " @details This call allows the application to retrieve the value of an option."] - #[doc = ""] - #[doc = " @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS."] - #[doc = " @param[out] p_opt Pointer to a ble_opt_t structure to be filled in."] - #[doc = ""] - #[doc = " @retval ::NRF_SUCCESS Option retrieved successfully."] - #[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] - #[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] - #[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] - #[doc = " @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time."] - #[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed."] - #[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported."] - #[doc = ""] - +#[doc = "@brief Get a BLE option."] +#[doc = ""] +#[doc = " @details This call allows the application to retrieve the value of an option."] +#[doc = ""] +#[doc = " @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS."] +#[doc = " @param[out] p_opt Pointer to a ble_opt_t structure to be filled in."] +#[doc = ""] +#[doc = " @retval ::NRF_SUCCESS Option retrieved successfully."] +#[doc = " @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied."] +#[doc = " @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle."] +#[doc = " @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints."] +#[doc = " @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time."] +#[doc = " @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed."] +#[doc = " @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported."] +#[doc = ""] #[inline(always)] pub unsafe fn sd_ble_opt_get(opt_id: u32, p_opt: *mut ble_opt_t) -> u32 { let ret: u32; @@ -17870,4 +17608,3 @@ pub unsafe fn sd_ble_opt_get(opt_id: u32, p_opt: *mut ble_opt_t) -> u32 { ); ret } - |